Search Results

Search found 13469 results on 539 pages for 'avoid trouble'.

Page 304/539 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Default Browser hangs (IE, Chrome)

    - by Craig Hinrichs
    IE was my default browser about three months ago when I started experiencing this issue. Intermittent hangs would occur when I would open a new main page or new tab to a site I know would be up. What I mean by a hang: The browser would open and say "Waiting for site " and do nothing more. If I closed the window and reopened it it would immediatly connect. Over time I would have to close and reopen the window to get to the page. This would happen to any page including Google. I finally got sick of it and started using chrome and I will never go back. I recently upgraded my anti-virus and now I am experiencing the same issue with Chrome. I use AVG for my antivirus. Empirically it seems if I don't make Chrome my default browser I don't experience the issue. I tested this theory for over two hours yesterday. Possible issues I have found this coudl be but not confirmed yet: MTU settings are not correct. I am infected but my antivirus has not caught it (unlikely but possible) ?? I would like to think this is related to my antivirus but I am unsure how to verify. I don't like the idea of killing my antivirus if #2 is a possibility. I am looking for tips on how I can trouble shoot possible issues. I am on Windows XP SP3 Thanks in advance.

    Read the article

  • Debootstrap Ubuntu over NFS leads to mknod I/O error

    - by Aaron B. Russell
    Hi everyone, I'm trying to prepare an Ubuntu environment for a diskless machine that will PXE boot and mount an NFS share as it's root. I've currently got another Ubuntu machine mounting the NFS share and I'm trying to debootstrap into it, but it has trouble creating devices over NFS: root@kimiko:~# mount | grep Seiuchi 192.168.0.203:/mnt/user/Seiuchi on /mnt type nfs (rw,addr=192.168.0.203) root@kimiko:~# debootstrap --arch i386 maverick /mnt http://gb.archive.ubuntu.com/ubuntu/ mknod: `/mnt/test-dev-null': Input/output error E: Cannot install into target '/mnt' mounted with noexec or nodev My NFS rule on the unRAID server is 192.168.0.201/32(rw,no_root_squash,sync). I don't have the noexec or nodev options set. I've not got much experience with NFS, so I'm probably missing something basic in the way I'm sharing this, but my attempts at Googling for an answer isn't really turning anything useful up. Does anyone have suggestions on what I might have missed or maybe relevant docs? Edit: Creating normal files (and directories) works just fine, I just can't create devices... root@kimiko:/mnt# mkdir foo root@kimiko:/mnt# cd foo root@kimiko:/mnt/foo# touch bar root@kimiko:/mnt/foo# mknod quux c 4 64 mknod: `quux': Input/output error root@kimiko:/mnt/foo# ls bar

    Read the article

  • Inconsistent DHCP replies with Windows 2008R2 DHCP server

    - by verbalicious
    I've got a Windows 2008R2 standard server running DHCP services. We've noticed that certain clients are receiving inconsistent DHCP replies. We have over 175 Windows workstations in this VLAN that don't seem to have trouble getting DHCP leases. However, PXE-booting clients trying to reach our DHCP server are able to get a lease inconsistently. Additionally, we tried using the "dhcping" tool against our DHCP server and found that roughly two of every three requests time out with "no answer" -- and this holds true when we set the timeout value on dhcping to 20seconds. After a failed attempt, however, we may get a dhcp lease reply immediately with dhcping. This leads me to believe that this issue isn't confined to PXE booting clients, but something more systemic with my LAN layer2 or DHCP. And that possibly my 175 windows clients are experiencing this in some form without my knowledge. We have over 30% of our scope available so the addresses are there. I was unable to find anything in the Windows server "DHCP-Server" log. Of course, my goal is to have my DHCP server reply to every request that it receives on the LAN!

    Read the article

  • IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing problem

    - by Ernest Mueller
    Hey all, I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

    Read the article

  • Some HTTPS connections via NAT fail, but work on firewall itself.

    - by hnxn
    Hi, I am having trouble establishing some HTTPS connections from internal machines, even though these same connections work if initiated on the firewall itself. The firewall machine is running Ubuntu 10.04.1 and shorewall 4.4.6. The internet connection is Bell PPPoE DSL (in Canada). I have tried various MTU settings, it doesn't seem to make any difference. Other protocols (HTTP, FTP, etc) generally work. The problem seems to be limited to certain sites; this one never works from an internal machine, but always works from the firewall itself: From internal machine: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:51:31-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. ^C From firewall: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:58:28-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 840 [image/gif] Saving to: `corp_logo.gif' 2011-01-13 20:58:28 (149 MB/s) - `corp_logo.gif' saved [840/840] This URL always works from both internal and firewall: https://encrypted.google.com/images/logos/ssl_logo_lg.gif Any troubleshooting tips would be greatly appreciated!

    Read the article

  • Allowing XP Home Clients To Access Active Directory Printers

    - by Sean M
    My school's network is based on Active Directory on Windows Server 2003 servers. Most of the computers in the school are members of the domain. However, we also acquired a passel of netbooks that are running Windows XP Home (as netbooks tend to), and we're trying to make those useful. The netbooks are made available to students by check-out, so none of them are dedicated to a specific user. I only want to allow the netbooks to do two significant network activities: to access the Internet (this is working acceptably well so far), and to print to one or more printers on the network. That second one is where trouble starts. I'm trying to find a way to allow the XP Home clients to access those Active Directory printers. All the solutions that I can come up with right now are expensive, ugly, or both - for example, changing the OS on the netbooks (even with imaging, that would take a lot of my time) or making sure that the user account on each netbook has a matching account in Active Directory with permissions for printing (invites security/maintainability disaster). Are there any elegant solutions? Failing that, what's the best ugly solution for allowing my students to print from the netbooks?

    Read the article

  • Cannot resolve dependencies when trying to install gnome-libs or xscreensaver on linux

    - by Frank
    I am a linux noob and am trying to install ORacle10g on RHEL5 but am running into difficulties on the requirements stage. The only 2 packages I require is gnome-libs and xscreensaver. I have downloaded both: 'gnome-libs-1.4.1.2.90-44.1.i386.rpm 'xscreensaver-4.18-5.rhel4.11.i386.rpm' But when I try to install them I get dependency errors. I have been trawling sites and forums for 2 days now and am no closer to resolving this and continuing with my Oracle install. To pre-empt possible trouble-shooting questions, here is a list of the dependcies that could not be resolved: For gnome-libs: libdb.so.2(GLIBC_2.0) ORBit libdb.so.2 libllOP.so.0 libORBitCosNaming.so.0 libORBitutil.so.0 libORBit.so.0 libpng.so.2 And it says all the above is needed by package 1:gnome-libs-1.4.1.2.90-44.1.i386(/gnome-libs-1.4.1.2.90-44.1.i386) For xscreensaver: xloadimage is needed by package 1:xscreensaver-4.18-5.rhel4.11.i386(/xscreensaver-4.18-5.rhel4.11.i386) Sorry if I have explained this in a crap way - like I said - linux noob here. Any help with this would be great, its been a long 2 days so far - i need to get this resolved soon. Thanks

    Read the article

  • Excel Help: Data Input Help

    - by B-Ballerl
    Everyday I download data from a site that will have rows each filled with individual data for clients. I'm able to input the data into excel as a whole but after that I'm having trouble figuring out how to put it into a chart. For example Web visits time. So say Client 1 stayed for 5 min increasing his total time on the site to 20 min and Client 2 stayed for 0 min keeping his time of 10 min and they were both registered on new years eve, and R1's last login was today and R2's was yesterday. (R for some reason repersents Client, no idea why...). Client 3 hasn't been on since he registered keeping his total at 4 min So my data would look something like this for Today (20110104) R1,20101231,20110104,20 R2,20101231,20110103,10 R3,20101231,20101231,4 And this for the day before (201101030), R1,20101231,20110102,15 R2,20101231,20110103,10 R3,20101231,20101231,4 I get about 200+ client rows each day where even the names of the Client list are changing. Is it possible to import the data each day and fill it in a excel sheet where the Client number is off on the left hand side in a table, and the amount of time (Whole Number ex. 4) each day it spends on the site extend to the right under it's specific date see Picture? I've manage to create a manual sheet but have been unsucessful at getting excel to do any of it for me. Here are two pictures:

    Read the article

  • Black Screen on Logon (windows 7 home premium)

    - by Blacknight334
    i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

    Read the article

  • Verizon 4G LTE vs. a LAN

    - by n8wrl
    I have been having quite a bit of trouble getting my new Verizon 4G-LTE service running on a Windows 7 desktop. My desktop is on a LAN here at home with two other PC's. We all share printers, files, media, etc. Until yesterday, we also shared a Verizon 3G modem via a NetGear 3G broadband WAP. That isn't compatible with the 4G so now I am just trying to get the 4G modem working directly connected to one of the desktops. After some USB wrangling, it seems to work. Except, every 7-10 minutes the connection would drop. After some time on the phone with a very nice Verizon technician, it seems to be staying up - it's been up for 20 minutes now. He told me that my LAN was causing the 4G to drop. That traffic on my LAN, even though it is not destined for the internet (ICS not working yet) was causing the cell tower to detect an 'IP change' and a 'security violation' in my modem and drop my connection. Is this Verizon's way of forbidding more than one computer to share a modem? I have my computer running now without a LAN connection and the 4G is still up. But this isn't practical. Has anyone heard of this?

    Read the article

  • Keyboard's media keys are blocked by a program

    - by Mike Hanson
    I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

    Read the article

  • How to stop my VPS from picking up ARP reqs it is not supposed to?

    - by Charles Stewart
    Machine: Xen-3.0 image running stable Debian Linux 2.6.18, pretty vanilla. My VPS provider asks me to deal with some trouble my image is causing, namely handling IP addresses it is not supposed to: The problem is that your server seems to be configured to use IPs that have not been appointed to you. Your server responds to ARP requests for the IPs 81.171.111.219 and 81.171.111.218. But you are not allowed to use those. Not explicitly, as far as I can tell! At least, nothing under /etc or /var/tmp mentions these IP addresses. But arp -v says something I can't make sense of: Address HWtype HWaddress Flags Mask Iface 81.171.111.1 ether 00:0C:DB:E3:80:00 C eth0 Entries: 1 Skipped: 0 Found: 1 What is it listening to? The possibilities seem to be: It's not my fault: my VPS providers have overlooked something. What might that be? 81.171.111.1 means I'm happy listening in on ARP requests that I shouldn't be: how do I change this? In any case, what does this mean? I'm looking in completely the wrong place for information on what my image is doing. Where should I be looking?

    Read the article

  • Overheating Toshiba Satellite L300

    - by ldigas
    A coleague of mine's having trouble with his new Toshiba Satellite L300 ... I tool a kook at it, and indeed it's hot as hell. I couldn't hold my hand on it for too long. He says it also has a tendency to turn itself off (WinXP 32bit running) with no forewarning. Hasn't happened to me while I was using it, but that wasn't long anyways. The first guess was it was too dirty ... problem is it's new, came out of a package a quarter of a year ago. Kept in a clean environment (office). Looks clean. No dust in sight. Second guess is that the fan wasn't working properly, cause indeed it has intervals of working, and non working. But when I listen to it, it sounds like normal usage. I took a SpeedFan measurement, and it reports temp. up to 85 Celsius ... which is definitely too high. Anyone knows what else I could do to it ? It is under warranty and it will go to the service, but I thought if there is something we can do, as to avoid carrying it there / be without it for a week ...

    Read the article

  • How to debug slow queries in Django+Postgres

    - by lacker
    My database queries from Django are starting to take 1-2 seconds and I'm having trouble figuring out why. Not too big a site, about 1-2 requests per second (that hit Django; static files are just served from nginx.) The thing that confuses me is, I can replicate the slowness in the Django shell using debug mode. But when I issue the exact same queries at an sql prompt they are fast. It takes about a second for a query to return, but when I check connection.queries it reports the time as under 10 ms. Here's an example (from the Django shell): >>> p = PlayerData.objects.get(uid="100000521952372") >>> a = time.time(); p.save(); print time.time() - a 1.96812295914 >>> for d in connection.queries: print d["time"] ... 0.002 0.000 0.000 How can I figure out where this extra time is being spent? I'm using Apache+mod_wsgi in daemon mode, but this happens with just the django shell as well, so I figure it is not apache-related.

    Read the article

  • How to diagnose occasional sudden resets?

    - by steve314
    I have a Windows XP system, and have recently upgraded by adding 2 1GB sticks of RAM to the 2x0.5GB already present. Since then, about once per day (the system is used 8+ hours per day), the system has suddenly and unexpectedly reset. On a couple of occasions, the system has frozen completely, only responding to the power button being held in for several seconds to force power off. Nothing at all ever appears in the system event log that might indicate a possible cause - everything seems to suggest business as usual. Sounds like faulty memory - but memtest86+ says otherwise. A full test, taking over an hour, found no issues. The next likely suspicion, then, is that I've knocked something while installing the RAM. Trouble is, everything I can think of to test seems fine. I've opened up the case and prodded a few things around, hoping to get better contact on connections etc, but there's no sign yet as to whether that has made a difference or not. I thought about a malware-related timing fluke, but again, so far as I can tell I'm all clear. All I can think of to add to my checklist (mainly of things that I can't easily check) is... The power supply is (1) only 350W, (2) not necessarily the best quality, and (3) powering a Prescott P4 640 3.2GHz. Could that be borderline overloaded or about to die? How do I check? Is it possible that the CPU isn't getting cooled properly? I haven't had the fan past normal tickover even doing video encoding, and the only sane temperature reading from SpeedFan is pretty steady at 36 celcius, so probably not. Any thoughts? Is there a standard procedure for diagnosing this kind of fault?

    Read the article

  • NVIDIA Tesla K20C in Dell PowerEdge R720xd --- power cables

    - by CptSupermrkt
    I am trying to put an NVIDIA Tesla K20C into a Dell PowerEdge R720xd. I'm having a bit of trouble understanding the power requirements of the card. First, here is a picture of two pages of the same manual, which seems contradictory to me. One page says only a single connector is required, while the next page says both are required. The entire manual for the card can be found here: http://www.nvidia.com/content/PDF/kepler/Tesla-K20-Active-BD-06499-001-v02.pdf Here is an photo taken of the power connections on the card: And here is a photo of where those connectors need to go, onto the PCI-E riser of the r720xd: Neither the R720xd NOR the GPU came with the necessary cables. And given what appears to be a contradiction in the GPU manual (above), I'm not even sure at this point what we actually need. I have searched high and low online for things like 2x6 pin PCI-E to 8 pin male-to-male and so on, and for the life of me cannot find what we need. In case anyone needs it, the owner's manual of the R720xd can be found here: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r720xd_Owner%27s%20Manual_en-us.pdf The relevant page is page 68, which clearly indicates that the 8-pin female port on the riser card is for a GPU. The bottom line question: exactly what power cables do we need to buy, and where can we find them?

    Read the article

  • nmap installation issue

    - by daasf
    vanilla centos with latest updates, installed gcc, and after ./configure:.... Configuration complete. Type make (or gmake on some *BSD machines) to compile. [root@winxp nmap-5.51]# make Makefile:375: makefile.dep: No such file or directory g++ -MM -I./liblua -I./libdnet-stripped/include -I./libpcre -I./libpcap -I./nbase - I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"http://nmap.org\" - DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" - D_FORTIFY_SOURCE=2 main.cc nmap.cc targets.cc tcpip.cc nmap_error.cc utils.cc idle_scan.cc osscan.cc osscan2.cc output.cc payload.cc scan_engine.cc timing.cc charpool.cc services.cc protocols.cc nmap_rpc.cc portlist.cc NmapOps.cc TargetGroup.cc Target.cc FingerPrintResults.cc service_scan.cc NmapOutputTable.cc MACLookup.cc nmap_tty.cc nmap_dns.cc traceroute.cc portreasons.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_binlib.cc nse_bit.cc > makefile.dep /bin/sh: g++: command not found make: *** [makefile.dep] Error 127 [root@winxp nmap-5.51]# yum install g++ -y Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.ash.fastserv.com * base: centos.mirror.choopa.net * extras: mirror.trouble-free.net * updates: mirror.nexcess.net Setting up Install Process No package g++ available. Nothing to do [root@winxp nmap-5.51]#

    Read the article

  • Almost every Inkscape extension yields an error in Mac OS X

    - by andyvn22
    I've run the latest few versions of Inkscape (currently landed on "0.47+devel"), and have been having trouble with the Extensions menu. So far, in every version of Inkscape I've tried, nearly every extension yields the following error: The fantastic lxml wrapper for libxml2 is required by inkex.py and therefore this extension. Please download and install the latest version from http://cheeseshop.python.org/pypi/lxml/, or install it through your package manager by a command like: sudo apt-get install python-lxml I've tried the instructions listed there, of course, with no effect. I've also found many references to this issue on fora, in bug trackers, etc., and as such also tried: sudo easy_install lxml cd /Applications/Inkscape.app/Contents/Resources/lib mv libxml2.2.dylib libxml2.2.dylib.old ln -s /usr/lib/libxml2.dylib and a few similar solutions. Nothing has produced any change in Inkscape's behavior. Does anyone know A) what's really going on here? Because from what I gather the error is not describing the actual problem. And of course B) a simple solution? I need those features! :)

    Read the article

  • Why Does DreamWeaver CS5 Discriminate between File Extensions, Even After Modding Mime Types!?

    - by Sam
    Hi folks, Even After I forced DreamWeaver CS5 to allow opening of .ast extensions as a MIME type of php5, which DreamWeaver now opens and colors correctly as described here, I still have trouble figuring out why it still discriminates between the two file extensions! Symptoms: External Files & Design View I have a file foo.php which php includes other files (e.g. the php-combined css.php and js.php). Now, when opening foo.php all functions work perfectly: the external (included) php files are all recognised correctly. However, when I change foo.php foo.ast, and open it again, It does not recognise the files extensions anymore in the top bar. Also, I lose the Design / Live View functionality.** When I change foo.ast to foo.php, all works again! Anyone any clues of why there remains a a difference between one and other extension? Note1: I have added the .ast extension to these four files, next to .php: 1 C:\Users\Sam\AppData\Local\VirtualStore\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml 2 C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml 3 C:\Users\Sam\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configuration\Extensions.txt 4 C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\Extensions.txt Note2: sometimes, even .php files do not want to show in design view or live view. Could this be caused by a corrupted installation?

    Read the article

  • Can't access certain web sites - reset router, any ideas?

    - by IniTech
    EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

    Read the article

  • How do I install git/git-svn on RHEL5 with a custom perl install?

    - by kbosak
    I've had nothing but trouble trying to install Git on RHEL5. First I tried from source, but ran into several issues with installing the docs. There appeared to be missing libs and such for parsing xml that I couldn't figure out how to get installed and recognized. Then I tried using the EPEL yum repository and was able to install git and its docs but now git-svn is not working. It complains about not finding the perl modules Git.pm and SVN/Core.pm. When I set the GITPERLLIB environment variable to the location of those libs it seg faults. Some background: RHEL5 came with perl 5.8.8, but we wanted to use 5.10 so I installed that from source (to a custom location). Someone then symlinked the system perl binary to this newer version of Perl to make sure nobody uses the wrong version. Each developer also has their own build of Perl. So I'm wondering what's the best way to install Git on this system and have both the docs and git-svn working correctly for each user. Unfortunately I'm a developer and not as good with system administration so take it easy on me.

    Read the article

  • Vista laptop 1 connects to network but Vista laptop 2 doesn't

    - by Jaips
    (Sorry if this is a dulipcate. I did a hunt but couldn't find matching question) We recently got a new router for our network (thomson TG585v8). It was already pre-configured by the ISP and was easy to setup. Both Vista laptops in this home network connected without trouble as well a iPod touch, all via wifi. In the last two days one of the laptops has been unable to connect cleanly to the network (connects as unidentified network). The other laptop, and iPod have not had any issues. I can't think of anything that has changed to make this happen now. I have rebooted the laptop and the router. I have updated the laptop wireless driver I have checked the laptop is set to automatically get IP I have logged into the router which correctly identifies all three wireless devices. The problem laptop connects via LAN without issue. Some things that may or may not matter: The problem laptop also sometimes uses a 3G dongle Both laptops use Windows Live Mesh to sync folders Laptop is usually set to go to sleep NB: it seems this is an intermittent issue, after an hour (since i noticed it) it seems to have fixed itself. Would love ideas though to solve this problem for good.

    Read the article

  • Malware Defense Shows Up in PlayOn Settings/Logs Although System Has Been Thoroughly Cleaned

    - by nicorellius
    I was hit really hard by some nasty malware: Malware Defense. I was doing something I should not have been doing when I got it (surfing Pirate Bay for TV shows). It locked up my system and I had to reboot in safe mode. I was able to shut down the process and remove it using a malware killer tool. I then installed, after my machine was cleaned up a bit, Clamwin, Malwarebytes, and another AV tool. I cleaned the heck out of my system. Simultaneously, while this was going on, I was having trouble with my media-server, PlayOn. This tool is great, but has some bugs. One in particular is that it will not function well with AV software running. I found a way to allow the new AV software to run while using PlayOn, but it still says I have Malware Defense on. Firstly, Malware Defense is long gone. I cleaned all remnants from my registry and scoured my system with the above tools multiple times. PlayOn is getting some information that I have this crap installed on my system, but it's not. The system runs OK, but not optimally. I have a feeling it is causing my streaming to be interrupted sometimes. How is it that I can't even find Malware Defense on my system if I tried but yet somehow PlayOn is getting a finger print of it somewhere? I have gone back and forth with MediaMall to no avail. I kind of just gave up, because the streaming works OK. BTW, I also uninstalled/reinstalled PlayOn several times, reverted back to previous versions, etc. The only thing I haven't done is reformat my disk and reinstall Windows. I really don't want to do this if there is another way to remove this little print. Any ideas?

    Read the article

  • Cannot Access Shared Folder From IIS

    - by Tim Scott
    From IIS I need to access a folder on another computer. Both servers are Window 2008 SP2, and they live in a Virtual Private Cloud on Amazon EC2. They reach one another by private IP -- they are in WORKGROUP, not a domain. I can access the shared folder manually when logged in to the client as Administrator. But IIS gets "access denied." Here's what I have done: Set File Sharing = ON Set Password Protected Sharing = OFF Set Public Folder Sharing = ON Shared the folder Added permission to the share: Everyone, Full Control Added permission to the share: NETWORK SERVICE, Full Control Verified that File & Printer Sharing is checked in Windows Firewall Opened port 445 to inbound traffic from local sources I tried adding <remote-machine-name>\NETWORK SERVICE to the share but it says it does not recognize the machine, which makes sense, I guess. As I said, from the other computer I have no trouble accessing the shared folder from my user account, but IIS is shut out. How does the file server even know the difference? I would assume that with Everyone given full control and password protected sharing turned off, it would not matter what the client user account is. In any case, how to solve? UPDATE: To clarify, I am not trying to serve up files on the share directly through IIS. Rather I am writing files to the share from my code (System.IO).

    Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >