Search Results

Search found 37765 results on 1511 pages for 'null reference exception'.

Page 304/1511 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

• SBS2003 to SBS2011 Migration - Installation Error

  - by Shawn Gradwell

  Microsoft Small Business Server 2003 to 2011 Migration. I followed the Migration Guide from Microsoft and the source server had no errors when running the various tests prior to the migration. I have completed the destination server setup using the Answer File and the server is up and running. It all looks good, I can access Exchange and AD and the only problem is the error message when you log in stating that the setup did not complete and to check the logs. Because all looks good I am continuing the migration to the destination server. I also have to state that this client does not use Sharepoint at all. Do I have to redo everything? Herewith the logs: [4992] 121016.225454.5905: Task: Starting Add User or Group access VSS registry. [4992] 121016.225454.7645: TaskManagement: In TaskScheduler.RunTasks(): The "ConfigureSharePointVSSRegistryTask" Task threw an Exception during the Run() call:System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) [4992] 121016.225454.7655: Setup: An error was encountered on the TME thread: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) [4956] 121016.225455.0685: Setup: _UnhandledExceptionHandler: Setup encountered an error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: The TME thread failed (see the inner exception). ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter.TasksCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass._LaunchWizard() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.RealMain(String[] args) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.Main(String[] args) [4956] 121016.225455.0865: Setup: Removed the password. [4956] 121016.225455.0905: Setup: Deleting scheduled task at path Microsoft\Windows\Windows Small Business Server 2011 Standard with name Setup [4956] 121016.225455.8055: Setup: Removed SBSSetup from the RunOnce.

  Read the article

• SNTP, why do you mock me?!

  - by Matthew

  --- SOLVED SEE EDIT 5 --- My w2k3 pdc is configured as an authoritative time server. Other servers on the domain are able to sync with it if I manually specify it in the peer list. By if I try to sync from flags 'domhier', it wont resync; I get the error message The computer did not resync because no time data was available. I can only think that it is not querying the pdc. I also tried setting the registry as shown here (http://support.microsoft.com/kb/193825). But no luck (I have not restarted the server, I am hoping I wont have to since it is the pdc) If you would like any further information on my config, please let me know. Edit 1: I have set the w32time service config AnnouceFlags to 0x05 as documented here www.krr.org/microsoft/authoritative_time_servers.php and a number of other places. The PDC syncs to an external time source (ntp). I can get the stripchart on the client from the pdc no problems. The loginserver for the host I am trying to configure is shown as the pdc. Edit 2: The packet capture has revealed something interesting. The client is contacting the correct server, and getting a valid response but I still get the same error message. Here is the NTP excerpt from the client to the server Flags: 11.. .... = Leap Indicator: alarm condition (clock not synchronized) (3) ..01 1... = Version number: NTP Version 3 (3) .... .011 = Mode: client (3) Peer Clock Stratum: unspecified or unavailable (0) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.015625 sec Root Delay: 0.0000 sec Root Dispersion: 1.0156 sec Reference Clock ID: NULL Reference Clock Update Time: Sep 1, 2010 05:29:39.8170 UTC Originate Time Stamp: NULL Receive Time Stamp: NULL Transmit Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Key ID: DC080000 Here is the reply NTP excerpt from the server to the client Flags: 0x1c 00.. .... = Leap Indicator: no warning (0) ..01 1... = Version number: NTP Version 3 (3) .... .100 = Mode: server (4) Peer Clock Stratum: secondary reference (3) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.00001 sec Root Delay: 0.1484 sec Root Dispersion: 0.1060 sec Reference Clock ID: 192.189.54.17 Reference Clock Update Time: Nov 8,2010 01:18:04.6223 UTC Originate Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Receive Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Transmit Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Key ID: 00000000 Edit 3: dumpreg for paramters on pdc Value Name Value Type Value Data ------------------------------------------------------------------------ ServiceMain REG_SZ SvchostEntry_W32Time ServiceDll REG_EXPAND_SZ C:\WINDOWS\system32\w32time.dll NtpServer REG_SZ bhvmmgt01.domain.com,0x1 Type REG_SZ AllSync and config Value Name Value Type Value Data -------------------------------------------------------------------------- LastClockRate REG_DWORD 156249 MinClockRate REG_DWORD 155860 MaxClockRate REG_DWORD 156640 FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 HoldPeriod REG_DWORD 5 LocalClockDispersion REG_DWORD 10 EventLogFlags REG_DWORD 2 PhaseCorrectRate REG_DWORD 7 MinPollInterval REG_DWORD 6 MaxPollInterval REG_DWORD 10 UpdateInterval REG_DWORD 100 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 AnnounceFlags REG_DWORD 5 MaxAllowedPhaseOffset REG_DWORD 300 FileLogSize REG_DWORD 10000000 FileLogName REG_SZ C:\Windows\Temp\w32time.log FileLogEntries REG_SZ 0-300 Edit 4: Here are some notables from the ntp log file on the pdc. ReadConfig: failed. Use default one 'TimeJumpAuditOffset'=0x00007080 DomainHierachy: we are now the domain root. ClockDispln: we're a reliable time service with no time source: LS: 0, TN: 864000000000, WAIT: 86400000 Edit 5: F&^%ING SOLVED! Ok so I was reading about people with similar problems, some mentioned w32time server settings applied by GPO, but I tested this early on and there were no settings applied to this service by gpo. Others said that the reporting software may not be picking up some old gpo settings applied. So I searched the registry for all w32time instaces. I came across an interesting key that indicated there may be some other ntp software running on the server. Sure enough, I look through the installed software list and there the little F*&%ER is. Uninstalled and now working like a dream. FFFFFFFUUUUUUUUUUUU

  Read the article

• Fake ISAPI Handler to serve static files with extention that are rewritted by url rewriter

  - by developerit

  Introduction I often map html extention to the asp.net dll in order to use url rewritter with .html extentions. Recently, in the new version of www.nouvelair.ca, we renamed all urls to end with .html. This works great, but failed when we used FCK Editor. Static html files would not get serve because we mapped the html extension to the .NET Framework. We can we do to to use .html extension with our rewritter but still want to use IIS behavior with static html files. Analysis I thought that this could be resolve with a simple HTTP handler. We would map urls of static files in our rewriter to this handler that would read the static file and serve it, just as IIS would do. Implementation This is how I coded the class. Note that this may not be bullet proof. I only tested it once and I am sure that the logic behind IIS is more complicated that this. If you find errors or think of possible improvements, let me know. Imports System.Web Imports System.Web.Services ' Author: Nicolas Brassard ' For: Solutions Nitriques inc. http://www.nitriques.com ' Date Created: April 18, 2009 ' Last Modified: April 18, 2009 ' License: CPOL (http://www.codeproject.com/info/cpol10.aspx) ' Files: ISAPIDotNetHandler.ashx ' ISAPIDotNetHandler.ashx.vb ' Class: ISAPIDotNetHandler ' Description: Fake ISAPI handler to serve static files. ' Usefull when you want to serve static file that has a rewrited extention. ' Example: It often map html extention to the asp.net dll in order to use url rewritter with .html. ' If you want to still serve static html file, add a rewritter rule to redirect html files to this handler Public Class ISAPIDotNetHandler Implements System.Web.IHttpHandler Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest ' Since we are doing the job IIS normally does with html files, ' we set the content type to match html. ' You may want to customize this with your own logic, if you want to serve ' txt or xml or any other text file context.Response.ContentType = "text/html" ' We begin a try here. Any error that occurs will result in a 404 Page Not Found error. ' We replicate the behavior of IIS when it doesn't find the correspoding file. Try ' Declare a local variable containing the value of the query string Dim uri As String = context.Request("fileUri") ' If the value in the query string is null, ' throw an error to generate a 404 If String.IsNullOrEmpty(uri) Then Throw New ApplicationException("No fileUri") End If ' If the value in the query string doesn't end with .html, then block the acces ' This is a HUGE security hole since it could permit full read access to .aspx, .config, etc. If Not uri.ToLower.EndsWith(".html") Then ' throw an error to generate a 404 Throw New ApplicationException("Extention not allowed") End If ' Map the file on the server. ' If the file doesn't exists on the server, it will throw an exception and generate a 404. Dim fullPath As String = context.Server.MapPath(uri) ' Read the actual file Dim stream As IO.StreamReader = FileIO.FileSystem.OpenTextFileReader(fullPath) ' Write the file into the response context.Response.Output.Write(stream.ReadToEnd) ' Close and Dipose the stream stream.Close() stream.Dispose() stream = Nothing Catch ex As Exception ' Set the Status Code of the response context.Response.StatusCode = 404 'Page not found ' For testing and bebugging only ! This may cause a security leak ' context.Response.Output.Write(ex.Message) Finally ' In all cases, flush and end the response context.Response.Flush() context.Response.End() End Try End Sub ' Automaticly generated by Visual Studio ReadOnly Property IsReusable() As Boolean Implements IHttpHandler.IsReusable Get Return False End Get End Property End Class Conclusion As you see, with our static files map to this handler using query string (ex.: /ISAPIDotNetHandler.ashx?fileUri=index.html) you will have the same behavior as if you ask for the uri /index.html. Finally, test this only in IIS with the html extension map to aspnet_isapi.dll. Url rewritting will work in Casini (Internal Web Server shipped with Visual Studio) but it’s not the same as with IIS since EVERY request is handle by .NET. Versions First release

  Read the article

• What are developer's problems with helpful error messages?

  - by Moo-Juice

  It continue to astounds me that, in this day and age, products that have years of use under their belt, built by teams of professionals, still to this day - fail to provide helpful error messages to the user. In some cases, the addition of just a little piece of extra information could save a user hours of trouble. A program that generates an error, generated it for a reason. It has everything at its disposal to inform the user as much as it can, why something failed. And yet it seems that providing information to aid the user is a low-priority. I think this is a huge failing. One example is from SQL Server. When you try and restore a database that is in use, it quite rightly won't let you. SQL Server knows what processes and applications are accessing it. Why can't it include information about the process(es) that are using the database? I know not everyone passes an Applicatio_Name attribute on their connection string, but even a hint about the machine in question could be helpful. Another candidate, also SQL Server (and mySQL) is the lovely string or binary data would be truncated error message and equivalents. A lot of the time, a simple perusal of the SQL statement that was generated and the table shows which column is the culprit. This isn't always the case, and if the database engine picked up on the error, why can't it save us that time and just tells us which damned column it was? On this example, you could argue that there may be a performance hit to checking it and that this would impede the writer. Fine, I'll buy that. How about, once the database engine knows there is an error, it does a quick comparison after-the-fact, between values that were going to be stored, versus the column lengths. Then display that to the user. ASP.NET's horrid Table Adapters are also guilty. Queries can be executed and one can be given an error message saying that a constraint somewhere is being violated. Thanks for that. Time to compare my data model against the database, because the developers are too lazy to provide even a row number, or example data. (For the record, I'd never use this data-access method by choice, it's just a project I have inherited!). Whenever I throw an exception from my C# or C++ code, I provide everything I have at hand to the user. The decision has been made to throw it, so the more information I can give, the better. Why did my function throw an exception? What was passed in, and what was expected? It takes me just a little longer to put something meaningful in the body of an exception message. Hell, it does nothing but help me whilst I develop, because I know my code throws things that are meaningful. One could argue that complicated exception messages should not be displayed to the user. Whilst I disagree with that, it is an argument that can easily be appeased by having a different level of verbosity depending on your build. Even then, the users of ASP.NET and SQL Server are not your typical users, and would prefer something full of verbosity and yummy information because they can track down their problems faster. Why to developers think it is okay, in this day and age, to provide the bare minimum amount of information when an error occurs? It's 2011 guys, come on.

  Read the article

• MongoDB usage best practices

  - by andresv

  The project I'm working on uses MongoDB for some stuff so I'm creating some documents to help developers speedup the learning curve and also avoid mistakes and help them write clean & reliable code. This is my first version of it, so I'm pretty sure I will be adding more stuff to it, so stay tuned! C# Official driver notes The 10gen official MongoDB driver should always be referenced in projects by using NUGET. Do not manually download and reference assemblies in any project. C# driver quickstart guide: http://www.mongodb.org/display/DOCS/CSharp+Driver+Quickstart Reference links C# Language Center: http://www.mongodb.org/display/DOCS/CSharp+Language+Center MongoDB Server Documentation: http://www.mongodb.org/display/DOCS/Home MongoDB Server Downloads: http://www.mongodb.org/downloads MongoDB client drivers download: http://www.mongodb.org/display/DOCS/Drivers MongoDB Community content: http://www.mongodb.org/display/DOCS/CSharp+Community+Projects Tutorials Tutorial MongoDB con ASP.NET MVC - Ejemplo Práctico (Spanish):http://geeks.ms/blogs/gperez/archive/2011/12/02/tutorial-mongodb-con-asp-net-mvc-ejemplo-pr-225-ctico.aspx MongoDB and C#:http://www.codeproject.com/Articles/87757/MongoDB-and-C C# driver LINQ tutorial:http://www.mongodb.org/display/DOCS/CSharp+Driver+LINQ+Tutorial C# driver reference: http://www.mongodb.org/display/DOCS/CSharp+Driver+Tutorial Safe Mode Connection The C# driver supports two connection modes: safe and unsafe. Safe connection mode (only applies to methods that modify data in a database like Inserts, Deletes and Updates. While the current driver defaults to unsafe mode (safeMode == false) it's recommended to always enable safe mode, and force unsafe mode on specific things we know aren't critical. When safe mode is enabled, the driver internal code calls the MongoDB "getLastError" function to ensure the last operation is completed before returning control the the caller. For more information on using safe mode and their implicancies on performance and data reliability see: http://www.mongodb.org/display/DOCS/getLastError+Command If safe mode is not enabled, all data modification calls to the database are executed asynchronously (fire & forget) without waiting for the result of the operation. This mode could be useful for creating / updating non-critical data like performance counters, usage logging and so on. It's important to know that not using safe mode implies that data loss can occur without any notification to the caller. As with any wait operation, enabling safe mode also implies dealing with timeouts. For more information about C# driver safe mode configuration see: http://www.mongodb.org/display/DOCS/CSharp+getLastError+and+SafeMode The safe mode configuration can be specified at different levels: Connection string: mongodb://hostname/?safe=true Database: when obtaining a database instance using the server.GetDatabase(name, safeMode) method Collection: when obtaining a collection instance using the database.GetCollection(name, safeMode) method Operation: for example, when executing the collection.Insert(document, safeMode) method Some useful SafeMode article: http://stackoverflow.com/questions/4604868/mongodb-c-sharp-safemode-official-driver Exception Handling The driver ensures that an exception will be thrown in case of something going wrong, in case of using safe mode (as said above, when not using safe mode no exception will be thrown no matter what the outcome of the operation is). As explained here https://groups.google.com/forum/?fromgroups#!topic/mongodb-user/mS6jIq5FUiM there is no need to check for any returned value from a driver method inserting data. With updates the situation is similar to any other relational database: if an update command doesn't affect any records, the call will suceed anyway (no exception thrown) and you manually have to check for something like "records affected". For MongoDB, an Update operation will return an instance of the "SafeModeResult" class, and you can verify the "DocumentsAffected" property to ensure the intended document was indeed updated. Note: Please remember that an Update method might return a null instance instead of an "SafeModeResult" instance when safe mode is not enabled. Useful Community Articles Comments about how MongoDB works and how that might affect your application: http://ethangunderson.com/blog/two-reasons-to-not-use-mongodb/ FourSquare using MongoDB had serious scalability problems: http://mashable.com/2010/10/07/mongodb-foursquare/ Is MongoDB a replacement for Memcached? http://www.quora.com/Is-MongoDB-a-good-replacement-for-Memcached/answer/Rick-Branson MongoDB Introduction, shell, when not to use, maintenance, upgrade, backups, memory, sharding, etc: http://www.markus-gattol.name/ws/mongodb.html MongoDB Collection level locking support: https://jira.mongodb.org/browse/SERVER-1240 MongoDB performance tips: http://www.quora.com/MongoDB/What-are-some-best-practices-for-optimal-performance-of-MongoDB-particularly-for-queries-that-involve-multiple-documents Lessons learned migrating from SQL Server to MongoDB: http://www.wireclub.com/development/TqnkQwQ8CxUYTVT90/read MongoDB replication performance: http://benshepheard.blogspot.com.ar/2011/01/mongodb-replication-performance.html

  Read the article

• Anatomy of a serialization killer

  - by Brian Donahue

  As I had mentioned last month, I have been working on a project to create an easy-to-use managed debugger. It's still an internal tool that we use at Red Gate as part of product support to analyze application errors on customer's computers, and as such, should be easy to use and not require installation. Since the project has got rather large and important, I had decided to use SmartAssembly to protect all of my hard work. This was trivial for the most part, but the loading and saving of results was broken by SA after using the obfuscation, rendering the loading and saving of XML results basically useless, although the merging and error reporting was an absolute godsend and definitely worth the price of admission. (Well, I get my Red Gate licenses for free, but you know what I mean!)My initial reaction was to simply exclude the serializable results class and all of its' members from obfuscation, and that was just dandy, but a few weeks on I decided to look into exactly why serialization had broken and change the code to work with SA so I could write any new code to be compatible with SmartAssembly and save me some additional testing and changes to the SA project.In simple terms, SA does all that it can to prevent serialization problems, for instance, it will not obfuscate public members of a DLL and it will exclude any types with the Serializable attribute from obfuscation. This prevents public members and properties from being made private and having the name changed. If the serialization is done inside the executable, however, public members have the access changed to private and are renamed. That was my first problem, because my types were in the executable assembly and implemented ISerializable, but did not have the Serializable attribute set on them!public class RedFlagResults : ISerializable        {        }The second problem caused by the pruning feature. Although RedFlagResults had public members, they were not truly properties, and used the GetObjectData() method of ISerializable to serialize the members. For that reason, SA could not exclude these members from pruning and further broke the serialization. public class RedFlagResults : ISerializable        {                public List<RedFlag.Exception> Exceptions;                 #region ISerializable Members                 public void GetObjectData(SerializationInfo info, StreamingContext context)                {                                info.AddValue("Exceptions", Exceptions);                }                 #endregionSo to fix this, it was necessary to make Exceptions a proper property by implementing get and set on it. Also, I added the Serializable attribute so that I don't have to exclude the class from obfuscation in the SA project any more. The DoNotPrune attribute means I do not need to exclude the class from pruning.[Serializable, SmartAssembly.Attributes.DoNotPrune]        public class RedFlagResults        {                public List<RedFlag.Exception> Exceptions {get;set;}        }Similarly, the Exception class gets the Serializable and DoNotPrune attributes applied so all of its' properties are excluded from obfuscation.Now my project has some protection from prying eyes by scrambling up the code so it's harder to reverse-engineer, without breaking anything. SmartAssembly has also provided the benefit of merging so that the end-user doesn't need to extract all of the DLL files needed by RedFlag into a directory, and can be run directly from the .zip archive. When an error occurs (hey, I'm only human!), an exception report can be sent to me so I can see what went wrong without having to, er, debug the debugger.

  Read the article

• Creating my first F# program in my new &ldquo;Expert F# Book&rdquo;

  - by MarkPearl

  So I have a brief hour or so that I can dedicate today to reading my F# book. It’s a public holiday and my wife’s birthday and I have a ton of assignments for UNISA that I need to complete – but I just had to try something in F#. So I read chapter 1 – pretty much an introduction to the rest of the book – it looks good so far. Then I get to chapter 2, called “Getting Started with F# and .NET”. Great, there is a code sample on the first page of the chapter. So I open up VS2010 and create a new F# console project and type in the code which was meant to analyze a string for duplicate words… #light let wordCount text = let words = Split [' '] text let wordset = Set.ofList words let nWords = words.Length let nDups = words.Length - wordSet.Count (nWords, nDups) let showWordCount text = let nWords,nDups = wordCount text printfn "--> %d words in text" nWords printfn "--> %d duplicate words" nDups   So… bad start - VS does not like the “Split” method. It gives me an error message “The value constructor ‘Split’ is not defined”. It also doesn’t like wordSet.Count telling me that the “namespace or module ‘wordSet’ is not defined”. ??? So a bit of googling and it turns out that there was a bit of shuffling of libraries between the CTP of F# and the Beta 2 of F#. To have access to the Split function you need to download the F# PowerPack and hen reference it in your code… I download and install the powerpack and then add the reference to FSharp.Core and FSharp.PowerPack in my project. Still no luck! Some more googling and I get the suggestions I got were something like this…#r "FSharp.PowerPack.dll";; #r "FSharp.PowerPack.Compatibility.dll";; So I add the code above to the top of my Program.fs file and still no joy… I now get an error message saying… Error    1    #r directives may only occur in F# script files (extensions .fsx or .fsscript). Either move this code to a script file, add a '-r' compiler option for this reference or delimit the directive with '#if INTERACTIVE'/'#endif'. So what does that mean? If I put the code straight into the F# interactive it works – but I want to be able to use it in a project. The C# equivalent I would think would be the “Using” keyword. The #r doesn’t seem like it should be in the FSharp code. So I try what the compiler suggests by doing the following…#if INTERACTIVE #r "FSharp.PowerPack.dll";; #r "FSharp.PowerPack.Compatibility.dll";; #endif No luck, the Split method is still not recognized. So wait a second, it mentioned something about FSharp.PowerPack.Compatibility.dll – I haven’t added this as a reference to my project so I add it and remove the two lines of #r code. Partial success – the Split method is now recognized and not underlined, but wordSet.Count is still not working. I look at my code again and it was a case error – the original wordset was mistyped comapred to the wordSet. Some case correction and the compiler is no longer complaining. So the code now seems to work… listed below…#light let wordCount text = let words = String.split [' '] text let wordSet = Set.ofList words let nWords = words.Length let nDups = words.Length - wordSet.Count (nWords, nDups) let showWordCount text = let nWords,nDups = wordCount text printfn "--> %d words in text" nWords printfn "--> %d duplicate words" nDups  So recap – if I wanted to use the interactive compiler then I need to put the #r code. In my mind this is the equivalent of me adding the the references to my project. If however I want to use the powerpack in a project – I just need to make sure that the correct references are there. I feel like a noob once again!

  Read the article

• Part 9: EBS Customizations, how to track

  - by volker.eckardt(at)oracle.com

  In the previous blogs we were concentrating on the preparation tasks. We have defined standards, we know about the tools and techniques we will start with. Additionally, we have defined the modification strategy, and how to handle such topics best. Now we are ready to take the requirements! Such requirements coming over in spreadsheets, word files (like GAP documents), or in any other format. As we have to assign some attributes, we start numbering all that and assign a short name to each of these requirements (=CEMLI reference). We may also have already a Functional person assigned, and we might involve someone from the tech team to estimate, and we like to assign a status such as 'planned', 'estimated' etc. All these data are usually kept in spreadsheets, but I would put them into a database (yes, I am from Oracle :). If you don't have any good looking and centralized application already, please give a try with Oracle APEX. It should be up and running in a day and the imported sheets are than manageable concurrently!  For one of my clients I have created this CEMLI-DB; in between enriched with a lot of additional functionality, but initially it was just a simple centralized CEMLI tracking application. Why I am pointing out again the centralized method to manage such data? Well, your data quality will dramatically increase, if you let your project members see (also review and update) "your" data.  APEX allows you to filter, sort, print, and also export. And if you can spend some time to define proper value lists, everyone will gain from. APEX allows you to work in 'agile' mode, means you can improve your application step by step. Let's say you like to reference a document, or even upload the same, you can do that. Or, you need to classify the CEMLIs by release, just add this release field, same for business area or CEMLI type. One CEMLI record may then look like this: Prepare one or two (online) reports, to be ready to present your "workload" to the project management. Use such extracts also when you work offline (to prioritize etc.). But as soon as you are again connected, feed the data back into the central application. Note: I have combined this application with an additional issue tracker.  Here the most important element is the CEMLI reference, which acts as link to any other application (if you are not using APEX also as issue tracker :).  Please spend a minute to define such a reference (see blog Part 8: How to name Customizations).   Summary: Building the bridge from Gap analyse to the development has to be done in a controlled way. Usually the information is provided differently, but it is suggested to collect all requirements centrally. Oracle APEX is a great solution to enter and maintain such information in a structured, but flexible way. APEX helped me a lot to work with distributed development teams during the complete development cycle.

  Read the article

• Doubts about several best practices for rest api + service layer

  - by TheBeefMightBeTough

  I'm going to be starting a project soon that exposes a restful api for business intelligence. It may not be limited to a restful api, so I plan to delegate requests to a service layer that then coordinates multiple domain objects (each of which have business logic local to the object). The api will likely have many calls as it is a long-term project. While thinking about the design, I recalled a few best practices. 1) Use command objects at the controller layer (I'm using Spring MVC). 2) Use DTOs at the service layer. 3) Validate in both the controller and service layer, though for different reasons. I have my doubts about these recommendations. 1) Using command objects adds a lot of extra single-purpose classes (potentially one per request). What exactly is the benefit? Annotation based validation can be done using this approach, sure. What if I have two requests that take the same parameters, but have different validation requirements? I would have to have two different classes with exactly the same members but different annotations? Bleh. 2) I have heard that using DTOs is preferable to parameters because it makes for more maintainable code down the road (say, e.g., requirements change and the service parameters need to be altered). I don't quite understand this. Shouldn't an api be more-or-less set in stone? I would understand that in the early phases of a project (or, especially, an entire company) the domain itself will not be well understood, and thus core domain objects may change along with the apis that manipulate these objects. At this point however the number of api methods should be small and their dependents few, so changes to the methods could easily be tolerated from a maintainability standpoint. In a large api with many methods and a substantial domain model, I would think having a DTO for potentially each domain object would become unwieldy. Am I misunderstanding something here? 3) I see validation in the controller and service layer as redundant in most cases. Why would I validate that parameters are not null and are in general well formed in the controller if the service is going to do exactly the same (and more). Couldn't I just do all the validation in the service and throw a runtime exception with a list of bad parameters then catch that in the controller to make the error messages more presentable? Better yet, couldn't I just make the error messages user-friendly in the service and let the exception trickle up to a global handler (ControllerAdvice in spring, for example)? Is there something wrong with either of these approaches? (I do see a use case for controller validation if the input does not map one-to-one with the service input, but since the controllers are for a rest api and not forms, the api parameters will probably map directly to service parameters.) I do also have a question about unchecked vs checked exceptions. Namely, I'm not really sure why I'd ever want to use a checked exception. Every time I have seen them used they just get wrapped into general exceptions (DomainException, SystemException, ApplicationException, w/e) to reduce the signature length of methods, or devs catch Exception rather than dealing with the App1Exception, App2Exception, Sys1Exception, Sys2Exception. I don't see how either of these practices is very useful. Why not just use unchecked exceptions always and catch the ones you actually do care about? You could just document what unchecked exceptions the method throws.

  Read the article

• Oracle MAA Part 1: When One Size Does Not Fit All

  - by JoeMeeks

  The good news is that Oracle Maximum Availability Architecture (MAA) best practices combined with Oracle Database 12c (see video) introduce first-in-the-industry database capabilities that truly make unplanned outages and planned maintenance transparent to users. The trouble with such good news is that Oracle’s enthusiasm in evangelizing its latest innovations may leave some to wonder if we’ve lost sight of the fact that not all database applications are created equal. Afterall, many databases don’t have the business requirements for high availability and data protection that require all of Oracle’s ‘stuff’. For many real world applications, a controlled amount of downtime and/or data loss is OK if it saves money and effort. Well, not to worry. Oracle knows that enterprises need solutions that address the full continuum of requirements for data protection and availability. Oracle MAA accomplishes this by defining four HA service level tiers: BRONZE, SILVER, GOLD and PLATINUM. The figure below shows the progression in service levels provided by each tier. Each tier uses a different MAA reference architecture to deploy the optimal set of Oracle HA capabilities that reliably achieve a given service level (SLA) at the lowest cost.  Each tier includes all of the capabilities of the previous tier and builds upon the architecture to handle an expanded fault domain. Bronze is appropriate for databases where simple restart or restore from backup is ‘HA enough’. Bronze is based upon a single instance Oracle Database with MAA best practices that use the many capabilities for data protection and HA included with every Oracle Enterprise Edition license. Oracle-optimized backups using Oracle Recovery Manager (RMAN) provide data protection and are used to restore availability should an outage prevent the database from being able to restart. Silver provides an additional level of HA for databases that require minimal or zero downtime in the event of database instance or server failure as well as many types of planned maintenance. Silver adds clustering technology - either Oracle RAC or RAC One Node. RMAN provides database-optimized backups to protect data and restore availability should an outage prevent the cluster from being able to restart. Gold raises the game substantially for business critical applications that can’t accept vulnerability to single points-of-failure. Gold adds database-aware replication technologies, Active Data Guard and Oracle GoldenGate, which synchronize one or more replicas of the production database to provide real time data protection and availability. Database-aware replication greatly increases HA and data protection beyond what is possible with storage replication technologies. It also reduces cost while improving return on investment by actively utilizing all replicas at all times. Platinum introduces all of the sexy new Oracle Database 12c capabilities that Oracle staff will gush over with great enthusiasm. These capabilities include Application Continuity for reliable replay of in-flight transactions that masks outages from users; Active Data Guard Far Sync for zero data loss protection at any distance; new Oracle GoldenGate enhancements for zero downtime upgrades and migrations; and Global Data Services for automated service management and workload balancing in replicated database environments. Each of these technologies requires additional effort to implement. But they deliver substantial value for your most critical applications where downtime and data loss are not an option. The MAA reference architectures are inherently designed to address conflicting realities. On one hand, not every application has the same objectives for availability and data protection – the Not One Size Fits All title of this blog post. On the other hand, standard infrastructure is an operational requirement and a business necessity in order to reduce complexity and cost. MAA reference architectures address both realities by providing a standard infrastructure optimized for Oracle Database that enables you to dial-in the level of HA appropriate for different service level requirements. This makes it simple to move a database from one HA tier to the next should business requirements change, or from one hardware platform to another – whether it’s your favorite non-Oracle vendor or an Oracle Engineered System. Please stay tuned for additional blog posts in this series that dive into the details of each MAA reference architecture. Meanwhile, more information on Oracle HA solutions and the Maximum Availability Architecture can be found at: Oracle Maximum Availability Architecture - Webcast Maximize Availability with Oracle Database 12c - Technical White Paper

  Read the article

• How to layout class definition when inheriting from multiple interfaces

  - by gabr

  Given two interface definitions ... IOmniWorkItem = interface ['{3CE2762F-B7A3-4490-BF22-2109C042EAD1}'] function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); // procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; end; IOmniWorkItemEx = interface ['{3B48D012-CF1C-4B47-A4A0-3072A9067A3E}'] function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); // property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; ... what are your ideas of laying out class declaration that inherits from both of them? My current idea (but I don't know if I'm happy with it): TOmniWorkItem = class(TInterfacedObject, IOmniWorkItem, IOmniWorkItemEx) strict private FData : TOmniValue; FOnWorkItemDone : TOmniWorkItemDoneDelegate; FOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; FResult : TOmniValue; FUniqueID : int64; strict protected procedure FreeException; protected //IOmniWorkItem function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); protected //IOmniWorkItemEx function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); public constructor Create(const data: TOmniValue; uniqueID: int64); destructor Destroy; override; public //IOmniWorkItem procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; public //IOmniWorkItemEx property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; As noted in answers, composition is a good approach for this example but I'm not sure it applies in all cases. Sometimes I'm using multiple inheritance just to split read and write access to some property into public (typically read-only) and private (typically write-only) part. Does composition still apply here? I'm not really sure as I would have to move the property in question out from the main class and I'm not sure that's the correct way to do it. Example: // public part of the interface interface IOmniWorkItemConfig = interface function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; end; // private part of the interface IOmniWorkItemConfigEx = interface ['{42CEC5CB-404F-4868-AE81-6A13AD7E3C6B}'] function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end; // implementing class TOmniWorkItemConfig = class(TInterfacedObject, IOmniWorkItemConfig, IOmniWorkItemConfigEx) strict private FOnExecute : TOmniBackgroundWorkerDelegate; FOnRequestDone : TOmniWorkItemDoneDelegate; FOnRequestDone_Asy: TOmniWorkItemDoneDelegate; public constructor Create(defaults: IOmniWorkItemConfig = nil); public //IOmniWorkItemConfig function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; public //IOmniWorkItemConfigEx function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end;

  Read the article

• C# Dev Challenge Part 1 of n &ndash; Beginner Edition

  - by mbcrump

  I developed this challenge to test one’s knowledge of C Sharp. I am planning on creating several challenges with different skill sets, so don’t get mad if this challenge doesn’t well challenge you... I noticed that most people like short quizzes so this one only contains 5 questions. All of the challenges are clear and concise of what I am asking you to do. No smoke and mirrors here, meaning that none of the code has syntax errors. The purpose of this exercise is to test several OOP concepts and see how much of the C# language you really know. Question #1 – Lets start off Easy… Will the following code snippet compile successfully? What does this question test? - Can this compile without a namespace? Do you have to have an entry point of “static void Main()”? class Test { static int Main() { System.Console.WriteLine("Developer Challenge"); return 0; } } Answer (select text in box below): Yes, it will compile successfully. Question #2 – What is the value of the Console.WriteLine statements? What does this question test? – Do I understand reference types/value types? If a variable is declared with the @ symbol and its not a reserved keyword does the application compile successfully? using System; internal struct MyStruct { public int Value; } internal class MyClass { public int Value; } class Test { static void Main() { MyStruct @struct1 = new MyStruct(); MyStruct @struct2 = @struct1; @struct2.Value = 100; MyClass @ref1 = new MyClass(); MyClass @ref2 = @ref1; @ref2.Value = 100; Console.WriteLine("Value Type: {0} {1}", @struct1.Value, @struct2.Value); Console.WriteLine("Reference Type: {0} {1}", @ref1.Value, @ref2.Value); } } Answer (select text in box below): Value Type: 0 100 Reference Type: 100 100 Question #3 – What is the value of the Console.WriteLine statements? What does this question test? – Can 2 objects reference the same point in memory? using System; class Test { static void Main() { string s1 = "Testing2"; string t1 = s1; Console.WriteLine(s1 == t1); Console.WriteLine((object)s1 == (object)t1); } } Answer (select text in box below): True True Question #4 – What is the value of the Console.WriteLine statements? What does this question test? – How does the “Stack” work – LIFO or FIFO?   using System; using System.Collections; class Test { static void Main() { Stack a = new Stack(5); a.Push("1"); a.Push("2"); a.Push("3"); a.Push("4"); a.Push("5"); foreach (var o in a) { Console.WriteLine(o); } } } Answer (select text in box below): 5 4 3 2 1 Question #5 – What is the value of the Console.WriteLine statements? What does this question test? – Array and General Looping Knowledge. using System; namespace ConsoleApplication5 { class Program { static void Main(string[] args) { int[] J_LIST = new int[5] { 1, 2, 3, 4, 5 }; int K = 10; int L = 5; foreach (var J in J_LIST) { K = K - J; L = K + 2 * J; Console.WriteLine("J = {0, 5} K = {1, 5} L = {2, 5}", J, K, L); } Console.ReadLine(); } } } Answer (select text in box below): J = 1 K = 9 L = 11 J = 2 K = 7 L = 11 J = 3 K = 4 L = 10 J = 4 K = 0 L = 8 J = 5 K = -5 L = 5 Stay Tuned for more challenges!

  Read the article

• ASP.NET MVC tries to load older version of Owin assembly

  - by d_mcg

  As a bit of context, I'm developing an ASP.NET MVC 5 application that uses OAuth-based authentication via Microsoft's OWIN implementation, for Facebook and Google only at this stage. Currently (as of v3.0.0, git-commit 4932c2f), the FacebookAuthenticationOptions and GoogleOAuth2AuthenticationOptions don't provide any property to force Facebook nor Google respectively to reauthenticate users (via appending the appropriate query string parameters) when signing in. Initially, I set out to override the following classes: FacebookAuthenticationOptions GoogleOAuth2AuthenticationOptions FacebookAuthenticationHandler (specifically AuthenticateCoreAsync()) GoogleOAuth2AuthenticationHandler (specifically AuthenticateCoreAsync()) yet discovered that the ~AuthenticationHandler classes are marked as internal. So I pulled a copy of the source for the Katana project (http://katanaproject.codeplex.com/) and modified the source accordingly. After compiling, I found that there are several dependencies that needed updating in order to use these updated assemblies (Microsoft.Owin.Security.Facebook and Microsoft.Owin.Security.Google) in the MVC project: Microsoft.Owin Microsoft.Owin.Security Microsoft.Owin.Security.Cookies Microsoft.Owin.Security.OAuth Microsoft.Owin.Host.SystemWeb This was done by replacing the existing project references to the 3.0.0 versions and updating those in web.config. Good news: the project compiles successfully. In debugging, I received an exception on startup: An exception of type 'System.IO.FileLoadException' occurred in [MVC web assembly].dll but was not handled in user code Additional information: Could not load file or assembly 'Microsoft.Owin.Security, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) The underlying exception indicated that Microsoft.AspNet.Identity.Owin was trying to load v2.1.0 of Microsoft.Owin.Security when calling app.UseExternalSignInCookie() from Startup.ConfigureAuth(IAppBuilder app) in Startup.Auth.cs. Unfortunately that assembly (and its other dependency, Microsoft.AspNet.Identity.Owin) aren't part of the Project Katana solution, and I can't find any accessible repository for these assemblies online. Are the Microsoft.AspNet.Identity assemblies open source, like the Katana project? Is there a way to fool those assemblies to use the referenced v3.0.0 assemblies instead of v2.1.0? The /bin folder contains the 3.0.0 versions of the Owin assemblies. I've upgraded the NuGet packages for Microsoft.AspNet.Identity.Owin, and this is still an issue. Any ideas on how to resolve this issue?

  Read the article

• VS 2012 / 2013 AccessViolationException

  - by Goran

  When I run the project (F5) I receive the following exception in IDE: An unhandled exception of type 'System.AccessViolationException' occurred in System.Windows.Forms.dll Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Stack trace reports at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef hWnd, Int32 msg, IntPtr wParam, IntPtr lParam) at System.Windows.Forms.Control.SendMessage(Int32 msg, Int32 wparam, IntPtr lparam) at System.Windows.Forms.Form.UpdateWindowIcon(Boolean redrawFrame) at System.Windows.Forms.Form.CreateHandle() at System.Windows.Forms.Control.get_Handle() at Microsoft.VisualStudio.HostingProcess.HostProc.RunParkingWindowThread() at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() I have never noticed receiving the same exception when running without debugger (CTRL+F5). This is a WPF project, but exception occurs before the App_ctor is executed, so this is external code, and my application code did not start to execute. This happens sporadically, sometimes it happens only once, and sometimes I run the project and get this message for several times in a roll. Then it does not pop up for 5-6 runs, and then starts again. Anyone knows why is this happening? I have just installed clean W8.1 64 bit, VS2013 and TFS 2013 (although I had the same problem with W8 and VS2012, but not as often).

  Read the article

• Commit in sharpSVN

  - by Pedro

  Hello! I have a problem doing commit with sharpsvn. Now i´m adding all the files of my working copy (if the file is added throws an exception), and after it i do commit. It works but it trows exceptions. There is some way to get the status of the repository before do add() and only add the new files or the files who are changed? And if i delete one file or folder on my working copy , How can i delete these files or folder on the repository? Code: String[] folders; folders = Directory.GetDirectories(direccionLocal,"*.*", SearchOption.AllDirectories); foreach (String folder in folders) { String[] files; files = Directory.GetFiles(folder); foreach (String file in files) { if (file.IndexOf("\\.svn") == -1) { Add(file, workingcopy); } } } Commit(workingcopy, "change"); Add: public bool Add(string path, string direccionlocal) { using (SvnClient client = new SvnClient()) { SvnAddArgs args = new SvnAddArgs(); args.Depth = SvnDepth.Empty; Console.Out.WriteLine(path); args.AddParents = true; try { return client.Add(path, args); } catch (Exception ex) { return false; } } } Commit: public bool Commit(string path, string message) { using (SvnClient client = new SvnClient()) { SvnCommitArgs args = new SvnCommitArgs(); args.LogMessage = message; args.ThrowOnError = true; args.ThrowOnCancel = true; try { return client.Commit(path, args); } catch (Exception e) { if (e.InnerException != null) { throw new Exception(e.InnerException.Message, e); } throw e; } } }

  Read the article

• Entity Framework with MySQL - Timeout Expired while Generating Model

  - by Nathan Taylor

  I've constructed a database in MySQL and I am attempting to map it out with Entity Framework, but I start running into "GenerateSSDLException"s whenever I try to add more than about 20 tables to the EF context. An exception of type 'Microsoft.Data.Entity.Design.VisualStudio.ModelWizard.Engine.ModelBuilderEngine+GenerateSSDLException' occurred while attempting to update from the database. The exception message is: 'An error occurred while executing the command definition. See the inner exception for details.' Fatal error encountered during command execution. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. There's nothing special about the affected tables, and it's never the same table(s), it's just that after a certain (unspecific) number of tables have been added, the context can no longer be updated without the "Timeout expired" error. Sometimes it's only one table left over, and sometimes it's three; results are pretty unpredictable. Furthermore, the variance in the number of tables which can be added before the error indicates to me that perhaps the problem lies in the size of the query being generated to update the context which includes both the existing table definitions, and also the new tables that are being added to it. Essentially, the SQL query is getting too large and it's failing to execute for some reason. If I generate the model with EdmGen2 it works without any errors, but the generated EDMX file cannot be updated within Visual Studio without producing the aforementioned exception. In all likelihood the source of this problem lies in the tool within Visual Studio given that EdmGen2 works fine, but I'm hoping that perhaps others could offer some advice on how to approach this very unique issue, because it seems like I'm not the only person experiencing it. One suggestion a colleague offered was maintaining two separate EBMX files with some table crossover, but that seems like a pretty ugly fix in my opinion. I suppose this is what I get for trying to use "new technology". :(

  Read the article

• Loading GeckoWebBrowser Exceptions

  - by Mostafa Mahdieh

  I get a strange exception when a window containing a GeckoWebBrowser is loaded. This is the exception message: An unhandled exception of type System.Runtime.InteropServices.COMException occurred in Skybound.Gecko.dll Additional information: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) This is the windows code: public partial class AddContents : Form { String path; public AddContents(String path) { this.path = path; InitializeComponent(); } private void exitToolStripMenuItem_Click(object sender, EventArgs e) { this.Close(); } private void AddContents_Load(object sender, EventArgs e) { geckoWebBrowser1.Navigate(path); } private int selId = 1; private bool updateMode = false; private void timer1_Tick(object sender, EventArgs e) { if (updateMode) update(); } private void geckoWebBrowser1_DocumentCompleted(object sender, EventArgs e) { timer1.Enabled = true; updateMode = true; } private void treeView1_AfterSelect(object sender, TreeViewEventArgs e) { geckoWebBrowser1.Navigate("javascript:scrollToBookmark(" + treeView1.SelectedNode.Tag + ")"); TreeNode selected = treeView1.SelectedNode; TreeNode prev = selected.PrevNode; TreeNode next = selected.PrevNode; if (prev == null) upButton.Enabled = false; if (next == null) downButton.Enabled = false; } private void update() { geckoWebBrowser1.Navigate("javascript:updateSelText()"); GeckoElement el = geckoWebBrowser1.Document.GetElementById("sel_result_991231"); if (el != null) { textBox1.Text = el.InnerHtml; addButton.Enabled = !textBox1.Text.Trim().Equals(String.Empty); } } private void textBox1_Enter(object sender, EventArgs e) { updateMode = false; } private void geckoWebBrowser1_DomMouseDown(object sender, GeckoDomMouseEventArgs e) { updateMode = true; update(); } private void geckoWebBrowser1_DomMouseUp(object sender, GeckoDomMouseEventArgs e) { updateMode = false; } private void addButton_Click(object sender, EventArgs e) { geckoWebBrowser1.Navigate("javascript:addIdToSel()"); TreeNode t = new TreeNode(textBox1.Text); t.Tag = selId; treeView1.Nodes.Add(t); selId++; } }

  Read the article

• FileNotFoundException when running WiX CustomAction with COMAdmin interop

  - by dabcabc

  I am trying to create a WiX custom action which will allow me to shutdown and clear down a COM+ package as part of an upgrade installation, or create and configure a new COM+ package as part of the initial installation. I previously had this running as a CustomAction within a standard Visual Studio MSI but this only allows the custom action to be executed after the files have been copied - which will fail as the package will still be running. The COMAdmin.dll has been added as a reference to the CustomAction project and is set CopyLocal=true. In the bin folder for the custom action project the Interop.COMAdmin.dll is present. The answer to this question seems to suggest that it should work. I am getting the following exception within the MSI log when trying to install: MSI (s) (C4:04) [10:40:34:205]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI119.tmp, Entrypoint: BeforeInstall SFXCA: Extracting custom action to temporary directory: C:\WINDOWS\Installer\MSI119.tmp-\ SFXCA: Binding to CLR version v2.0.50727 Calling custom action MyCustomAction!MyCustomAction.CustomActions.BeforeInstall Exception thrown by custom action: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'Interop.COMAdmin, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. File name: 'Interop.COMAdmin, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' at MyCustomAction.CustomActions.BeforeInstall(Session session) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value . --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture) at Microsoft.Deployment.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint, IntPtr remotingDelegatePtr)

  Read the article

• Handling async ASMX web service exceptions

  - by Andy

  Hi, I've developed silverlight client with makes async web services calls to a asmx web service. The problem is, I want to handle exceptions, so far as to be able to tell in the client application whether there was an exception in the webservice (and therefore will be logged local to the webservice) or whether there was a communication problem (i.e. the endpoint for the webservice was wrong). In testing both types of exceptions in my project I get the same generic exception: System.ServiceModel.CommunicationException: The remote server returned an error: NotFound. This exception is amazingly useless when an exception occured in the webservice as it clearly has been found. Is the presence of this generic error to do with security (not being allowed to see true errors)? It can't be the fact that I don't have debug strings as I'm running on a dev PC. Either way, my question is, what's the best way to handle async errors in a commercial silverlight application? Any links or ideas are most welcome! :) Thanks a lot! Andy.

  Read the article

• Weird - "The EntityReference object could not be serialized" when serializing from an ASP.NET Web Si

  - by Mikey Cee

  I have an Entity Framework data model. Part of the model is a Customer entity. The web service provides a method to get a customer, and to receive an updated version of this customer to be persisted. To test this, I created a new ASP.NET web Application, (Solution Add New Project ASP.NET Web Application), then added a reference to my service reference using the standard Add Service Reference dialog. I then call the service using the following code: var client = new CustomerServiceClient(); var customer = client.GetCustomerByID(18); // get it customer.LimitDown = 100; // change it client.SaveCustomer(customer); // persist it Everything works as expected. Now, I do exactly the same thing, but this time with as ASP.NET Web Site (Solution Add New Web Site ASP.NET Web Site). I add the reference in a similar fashion and copy and paste the code above into the new site. But now I get the following exception thrown on the 4th line: System.InvalidOperationException The EntityReference object could not be serialized. This type of object cannot be serialized when the RelationshipManager belongs to an entity object that does not implement IEntityWithRelationships. Source Error: Line 2474: Line 2475: public SkyWalkerCustomerService.OperationResult SaveCustomer(SkyWalkerCustomerService.Customer customer) { Line 2476: return base.Channel.SaveCustomer(customer); Line 2477: } Line 2478: } Stack Trace: System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +9475203 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +345 SkyWalkerCustomerService.ICustomerService.SaveCustomer(Customer customer) +0 SkyWalkerCustomerService.CustomerServiceClient.SaveCustomer(Customer customer) in c:\Windows\Microsoft.NET\Framework\v4.0.30128\Temporary ASP.NET Files\testsite2\dd2bcf8d\f95604ff\App_WebReferences.fz4h7x7l.0.cs:2476 _Default.Page_Load(Object sender, EventArgs e) in c:\Users\Mike\Documents\Repositories\UWC\SkyWalker\TestSite2\Default.aspx.cs:17 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnLoad(EventArgs e) +91 System.Web.UI.Control.LoadRecursive() +61 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1966 Googling for this error returns very little. Why doesn't this work?

  Read the article

• What does suds mean by "<faultcode/> not mapped to message part" ?

  - by Pratik Patel

  I'm using suds for the first time and trying to communicate with a server hosted by an external company. When I call a method on the server I get this XML back. soap:Server Can't use string ("") as an ARRAY ref while "strict refs" in use at /vindicia/site_perl/Vindicia/Soap/DocLitUtils.pm line 130. The exception thrown is this: File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 538, in __call__ return client.invoke(args, kwargs) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 602, in invoke result = self.send(msg) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 634, in send result = self.succeeded(binding, reply.message) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\client.py", line 669, in succeeded r, p = binding.get_reply(self.method, reply) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\bindings\binding.py", line 157, in get_reply result = self.replycomposite(rtypes, nodes) File "C:\Python26\lib\site-packages\suds-0.4-py2.6.egg\suds\bindings\binding.py", line 227, in replycomposite raise Exception(' not mapped to message part' % tag) Exception: not mapped to message part Any idea why suds is throwing the exception? Any thoughts on how it could be fixed?

  Read the article

• Weird RecordStore behavior when RecordStoreFullException occurs

  - by Michael P

  Hello everyone! I'm developing a small J2ME application that displays bus stops timetables - they are stored as records in MIDP RecordStores. Sometimes records can not fit a single RecordStore, especially on record update - using setRecord method - a RecordStoreFullException occurs. I catch the exception, and try to write the record to a new RecordStore along with deleting the previous one in the old RecordStore. Everything works fine except of deleting record from RecordStore where the RecordStoreFullException occurs. If I make an attempt to delete record that could not be updated, another Exception of type InvalidRecordIDException is thrown. This is weird and undocumented in MIDP javadoc. I have tested it on Sun WTK 2.5.2, MicroEdition SDK 3.0 and Nokia Series 40 SDK. Furthermore I created a code that reproduces this strange behaviour: RecordStore rms = null; int id = 0; try { rms = RecordStore.openRecordStore("Test", true); byte[] raw = new byte[192*10024]; //Big enough to cause RecordStoreFullException id = rms.addRecord(raw, 0, 160); rms.setRecord(id, raw, 0, raw.length); } catch (Exception e) { try { int count = rms.getNumRecords(); RecordEnumeration en = rms.enumerateRecords(null, null, true); count = en.numRecords(); while(en.hasNextElement()){ System.out.println("NextID: "+en.nextRecordId()); } rms.deleteRecord(id); //this won't work! rms.setRecord(id, new byte[5], 0, 5); //this won't work too! } catch (Exception ex) { ex.printStackTrace(); } } I added extra enumeration code to produce other weird behavior - when RecordStoreFullException occurs, count variable will be set to 1 (if RMS was empty) by both methods - getNumRecords and numRecords. System.out.println will produce NextID: 0! It is not acceptable because record ID can not be 0! Could someone explain this strange behavior? Sorry for my bad English.

  Read the article

• Grails Mail port configuration

  - by bsreekanth

  Hello, I am trying to send mail through grails mail plugin. I configured according to the documentation, and also followed few blog posts (http://blog.lourish.com/2010/04/02/sending-asynchronous-html-email-in-grails-with-activemq-jms-and-gmail/). That post mention that the closure way of declaring the configuration overrides others, but not true. Anyway I tried both approach, but seems like the port is still use the smtp default one. I get the below exception. exception: org.springframework.mail.MailSendException: Mail server connection failed; nested exception is javax.mail.MessagingException: Could not connect to SMTP host: localhost, port: 25; nested exception is: java.net.ConnectException: Connection refused: connect Now, I wrote a small program directly using the java mail library, and I could send the mail with that. The configuration is shown below. tried additional config "mail.smtp.port":"465"", but no change.. used the parameters mentioned in the above blog post, result same grails { mail { host = "smtp.gmail.com" port = "465" username = "[email protected]" password = "mypwd" props = ["mail.smtp.auth":"true", // "mail.smtp.port":"465", "mail.smtp.socketFactory.port":"465", "mail.smtp.socketFactory.class":"javax.net.ssl.SSLSocketFactory", "mail.smtp.socketFactory.fallback":"false"] } } thanks in advance.. Update: It is not port or firewall config, as when I made a grails application from scratch, and tried with the same config, everything works. Also, asked in grails forum http://grails.1312388.n4.nabble.com/grails-mail-mailSender-does-not-have-config-values-td2237704.html#a2237704 . Hope get a lead to try.

  Read the article

• script to search and replace deprecated functions

  - by user573881

  Hi, I am using the following script to search and replace the deprecated functions in a file with the newer ones. 5 for strFile in `ls deprecated_functions_search_and_replace.txt ` 6 do 7 sed "s/ereg_replace[^\(]*(\([^,]*\),/preg_replace\1('#'.\2.'#',/g" $strFile > temp_file 8 mv $strFile $strFile".bakup" 9 mv temp_file $strFile 10 11 sed "s/eregi[^\(]*(\([^,]*\),/preg_match\1('#'.\2.'#i',/g" $strFile > temp_file 12 mv $strFile $strFile".bakup" 13 mv temp_file $strFile 14 15 sed "s/ereg[^\(]*(\([^,]*\),/preg_match\1('#'.\2.'#',/g" $strFile > temp_file 16 mv $strFile $strFile".bakup" 17 mv temp_file $strFile 18 19 sed "s/split[^\(]*(\([^,]*\),/preg_split\1('#'.\2.'#',/g" $strFile > temp_file 20 mv $strFile $strFile".bakup" 21 mv temp_file $strFile 22 23 sed "s/mysql_escape_string/mysql_real_escape_string/g" $strFile > temp_file 24 mv $strFile $strFile".bakup" 25 mv temp_file $strFile 26 27 sed "s/set_magic_quotes_runtime(0)/\/\/set_magic_quotes_runtime(0)/g" $strFile > temp_file 28 mv $strFile $strFile".bakup" 29 mv temp_file $strFile 30 31 sed "s/ini_get('safe_mode')/false/g" $strFile > temp_file 32 mv $strFile $strFile".bakup" 33 mv temp_file $strFile 34 35 sed "s/session_register('\(.*\)')/$_SESSION['\1']=$\1/g" $strFile > temp_file 36 mv $strFile $strFile".bakup" 37 mv temp_file $strFile 38 39 sed "s/session_unregister('\(.*\)')/$_SESSION['\1']=''/g" $strFile > temp_file 40 mv $strFile $strFile".bakup" 41 mv temp_file $strFile 42 43 done However, when I run this script I am getting an error saying: sed: -e expression #1, char 60: invalid reference \2 on `s' command's RHS sed: -e expression #1, char 52: invalid reference \2 on `s' command's RHS sed: -e expression #1, char 50: invalid reference \2 on `s' command's RHS sed: -e expression #1, char 51: invalid reference \2 on `s' command's RHS I am unable to figure out whats going wrong. Someone please help me. Regards.

  Read the article

• Hibernate: "Field 'id' doesn't have a default value"

  - by André Neves

  Hi, all. I'm facing what I think is a simple problem with Hibernate, but can't get over it (Hibernate forums being unreachable certainly doesn't help). I have a simple class I'd like to persist, but keep getting: SEVERE: Field 'id' doesn't have a default value Exception in thread "main" org.hibernate.exception.GenericJDBCException: could not insert: [hibtest.model.Mensagem] at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103) at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91) [ a bunch more ] Caused by: java.sql.SQLException: Field 'id' doesn't have a default value [ a bunch more ] The relevant code for the persisted class is: package hibtest.model; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.Id; import javax.persistence.Inheritance; import javax.persistence.InheritanceType; @Entity @Inheritance(strategy = InheritanceType.JOINED) public class Mensagem { protected Long id; protected Mensagem() { } @Id @GeneratedValue public Long getId() { return id; } public Mensagem setId(Long id) { this.id = id; return this; } } And the actual running code is just plain: SessionFactory factory = new AnnotationConfiguration() .configure() .buildSessionFactory(); { Session session = factory.openSession(); Transaction tx = session.beginTransaction(); Mensagem msg = new Mensagem("YARR!"); session.save(msg); tx.commit(); session.close(); } I tried some "strategies" within the GeneratedValue annotation but it just doesn't seem to work. Initializing id doesn't help either! (eg Long id = 20L). Could anyone shed some light? EDIT 2: confirmed: messing with@GeneratedValue(strategy = GenerationType.XXX) doesn't solve it SOLVED: recreating the database solved the problem

  Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >