Search Results

Search found 41396 results on 1656 pages for 'domain object'.

Page 305/1656 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• What happens to my domain if the TLD fails?

  - by KingCrab

  First question, hopefully I don't mess this up. I have recently registered some domains on the basically brand new .directory gTLD. Because of operating costs to maintain a gTLD, it is assumed that many of the hundreds being rolled out this year and next will fail. I will admit I am not very knowledgable on how the TLD process works. What exactly does a new TLD failing mean? I realize that they lose ICANN accreditation, but does that just mean that they will be no longer be sold? If the .directory were to go under, would my .directory domains be affected? I bought it from domain registrar Gandi if that helps.

  Read the article

• Why do the overloads of String.Format exist?

  - by GiddyUpHorsey

  I was using Reflector to look at the implementation of String.Format and had always been under the impression that the overloads of String.Format that took 1, 2 & 3 arguments were optimized versions of the method that takes an object array. However, what I found was that internally they create an object array and then call a method that takes an object array. 1 arg public static string Format(string format, object arg0) { if (format == null) { throw new ArgumentNullException("format"); } return Format(null, format, new object[] { arg0 }); } 2 args public static string Format(string format, object arg0, object arg1) { if (format == null) { throw new ArgumentNullException("format"); } return Format(null, format, new object[] { arg0, arg1 }); } 3 args public static string Format(string format, object arg0, object arg1, object arg2) { if (format == null) { throw new ArgumentNullException("format"); } return Format(null, format, new object[] { arg0, arg1, arg2 }); } Object array public static string Format(string format, params object[] args) { if ((format == null) || (args == null)) { throw new ArgumentNullException((format == null) ? "format" : "args"); } return Format(null, format, args); } Internally they all end up using the same code and so using the 1, 2 & 3 argument versions are no faster than the object array version. So my question is - why do they exist? When you use the object array version with a comma separated list of values, the compiler automatically converts the arguments into an object array because of the params/ParamArray keyword which is essentially what the 1, 2 & 3 versions do, so they seem redundant. Why did the BCL designers add these overloads?

  Read the article

• Capistrano configuration

  - by Eli

  I'm having some issues with variable scope with the capistrano-ext gem's multistage module. I currently have, in config/deploy/staging.rb. set(:settings) { YAML.load_file("config/deploy.yml")['staging'] } set :repository, settings["repository"] set :deploy_to, settings["deploy_to"] set :branch, settings["branch"] set :domain, settings["domain"] set :user, settings["user"] role :app, domain role :web, domain role :db, domain, :primary => true My config/deploy/production.rb file is similar. This doesn't seem very DRY. Ideally, I think I'd like everything to be in the deploy.rb file. If there were a variable set with the current stage, everything would be really clean. UPDATE: I found a solution. I defined this function in deploy.rb: def set_settings(params) params.each_pair do |k,v| set k.to_sym, v end if exists? :domain role :app, domain role :web, domain role :db, domain, :primary => true end end Then my staging.rb file is just set_settings(YAML.load_file("config/deploy.yml")['staging'])

  Read the article

• How to determine where on a path my object will be at a given point in time?

  - by Dave

  I have map and an obj that is meant to move from start to end in X amount of time. The movements are all straight lines, as curves are beyond my ability at the moment. So I am trying to get the object to move from these points, but along the way there are way points which keep it on a given path. The speed of the object is determined by how long it will take to get from start to end (based on X). This is what i have so far: //get_now() returns seconds since epoch var timepassed = get_now() - myObj[id].start; //seconds since epoch for departure var timeleft = myObj[id].end - get_now(); //seconds since epoch for arrival var journey_time = 60; //this means 60 minutes total journey time var array = [[650,250]]; //way points along the straight paths if(step == 0 || step =< array.length){ var destinationx = array[step][0]; var destinationy = array[step][1]; }else if( step == array.length){ var destinationx = 250; var destinationy = 100; } else { var destinationx = myObj[id].startx; var destinationy = myObj[id].starty; } step++; When the user logs in at any given time, the object needs to be drawn in the correct place of the path, almost as if its been travelling along the path whilst the user has not been at the PC with the available information i have above. How do I do this? Note: The camera angle in the game is a birds eye view so its a straight forward X:Y rather than isometric angles.

  Read the article

• How can I pass an external instance to the constructor of an object that's being created using the default XNA XML content loader?

  - by Michael

  I'm trying to understand how to use the XNA XML content importer to instantiate non-trivial objects that are more than a collection of basic properties (e.g., a class that inherits from DrawableGameObject or GameObject and requires other things to be passed into its constructor). Is it possible to pass existing external instances (e.g., an instance of the current Game) to the constructor of an object that's being created using the default XNA XML content loader? For example, imagine that I have the following class, inheriting from DrawableGameComponent: public class Character : DrawableGameComponent { public string Name { get; set; } public Character(Game game) : base(game) { } public override void Update(GameTime gameTime) { } public override void Draw(GameTime gameTime) { } } If I had a simple class that did not need other parameters in its constructor (i.e., the Game instance), then I could simply use this XML: <XnaContent> <Asset Type="MyNamespace.Character"> <Name>John Doe</Name> </Asset> </XnaContent> ...and then create an instance of Character using this code: var character = Content.Load<Character>("MyXmlAssetName"); But that won't work because I need to pass the need to pass the Game into the constructor. What's the best way to handle this situation? Is there a way to pass in things like the current Game using the default XNA XML content loader? Do I need to write my own XML loader? (If so, how?) Is there a better object-oriented design that I should be using for my classes? Note: Although I used Game in this example, I'm really just asking how to pass any type of existing instance to my constructors. (For example, I'm using the Farseer Physics Engine, and some of my classes also need a reference to the Farseer World object too.) Thanks in advance.

  Read the article

• Associate a texture to an object (from a data-model, not graphical point of view).

  - by Raveline

  I'm writing a roguelike where objects and floor can be made of different materials. For instance, let's say we can have a wooden chair, an iron chair, a golden chair, and so on. I've got an Object class (I know, the name is terrible), which is more or less using a composite pattern, and a Material class. Material have different important properties (noise, color...). For the time being, there are 5 different instances of materials, created at the initialization of the game. How would connect an instance of Object with one of the 5 instances of materials ? I see three simple solutions : Using a pointer. Simple and brutal. Using an integer material-id, then get the materials out of a table when engine manipulates the object for various purposes (display, attack analysis, etc.). Not very beautiful, I think, and not very flexible. Using an integer material-id, then get the materials out of a std::map. A bit more flexible, but still not perfect. Do you see other possibilities ? If not, what would you choose (and why) ? Thanks in advance !

  Read the article

• Using the standard OBJECT tag, how can I display a java applet with automatic prompts to install Java and with fallback content?

  - by CB

  This is the code i'm currently using: (note - %s is replaced on the server side) <!--[if !IE]>--> <object type="application/x-java-applet" width="300" height="300" > <!--<![endif]--> <!--[if IE]> <object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" codebase="http://java.sun.com/update/1.6.0/jinstall-6u22-windows-i586.cab" type="application/x-java-applet" width="300" height="300" > <!--><!-- <![endif]--> <param name="codebase" value="/media/vnc/" > <param name="archive" value="TightVncViewer.jar" /> <param name="code" value="com.tightvnc.vncviewer.VncViewer" /> <param name="port" value="%s" /> <param name="Open New Window" value="yes" /> </object> When Java is installed, this works perfectly in both IE and Firefox. When Java is not installed, IE and Firefox both correctly prompt for an autodownload of Java 1.6 from the codebase line. (IE via the activex url given firefox via the Plugin Finder Service) Now, suppose I want fallback content to be shown if the plugin isn't installed, say a simple message like "Get Java". From reading the specs, i'd assume this should not change the plugin finding prompt - that is, rendering the fallback should be seen as a failure to render the object tag. Thus, I should still get the plugin finder service prompting me to install Java. Instead, simply adding a single character to the innerHTML of the object element causes Firefox to no longer prompt. Test this by visiting data:text/html,<object type='application/x-java-applet'>Java failed to load</object>. How can I keep firefox prompting to install Java while providing fallback content? URL to test Firefox's Java Plugin Finder Service: data:text/html,<object type='application/x-java-applet'/>

  Read the article

• Objects leaking immediately from allocation using either new or [[Object alloc] init];

  - by Sam

  While running Instruments to find leaks in my code, after I've loaded a file and populate an NSMutableArray with new objects, leaks pop up! I am correctly releasing the objects. Sample code below: //NSMutableArray declared as a retained property in the parent class if(!mutableArray) mutableArray = [[NSMutableArray alloc] initWithCapacity:objectCount]; else [mutableArray removeAllObjects]; //Iterates through the read in data and populate the NSMutableArray for(int i = 0; i < objectCount; i++){ //Initializes a new object with data MyObject *object = [MyObject new]; //Adds the object to the mutableArray [mutableArray addObject:object]; //Releases the object [object release]; } I get a number of leaks from Instruments terminating at the addition of the 'object' into the 'mutableArray', but also including the allocation of the 'object' and the 'mutableArray'. I don't get it. Not to mention, this is happening on the first call of the enclosing method so the allocation of the NSMutableArray is being hit in the logic block, not the 'removeAllObjects' selector. Lastly, does Core Foundation have a major bug in it that randomly creates CFStrings and mismanages their memory? My code does not even use those, nor do the leaks where they occur have anything to do with my code. Almost all of my applications so far deal with OpenGL (in case anyone knows of a threading issue that arises from trying to synch the backend of the program with the front end of displaying the contents of an NSOpenGLView class or whatever it is).

  Read the article

• Java: how to avoid circual references when dumping object information with reflection?

  - by Tom

  I've modified an object dumping method to avoid circual references causing a StackOverflow error. This is what I ended up with: //returns all fields of the given object in a string public static String dumpFields(Object o, int callCount, ArrayList excludeList) { //add this object to the exclude list to avoid circual references in the future if (excludeList == null) excludeList = new ArrayList(); excludeList.add(o); callCount++; StringBuffer tabs = new StringBuffer(); for (int k = 0; k < callCount; k++) { tabs.append("\t"); } StringBuffer buffer = new StringBuffer(); Class oClass = o.getClass(); if (oClass.isArray()) { buffer.append("\n"); buffer.append(tabs.toString()); buffer.append("["); for (int i = 0; i < Array.getLength(o); i++) { if (i < 0) buffer.append(","); Object value = Array.get(o, i); if (value != null) { if (excludeList.contains(value)) { buffer.append("circular reference"); } else if (value.getClass().isPrimitive() || value.getClass() == java.lang.Long.class || value.getClass() == java.lang.String.class || value.getClass() == java.lang.Integer.class || value.getClass() == java.lang.Boolean.class) { buffer.append(value); } else { buffer.append(dumpFields(value, callCount, excludeList)); } } } buffer.append(tabs.toString()); buffer.append("]\n"); } else { buffer.append("\n"); buffer.append(tabs.toString()); buffer.append("{\n"); while (oClass != null) { Field[] fields = oClass.getDeclaredFields(); for (int i = 0; i < fields.length; i++) { if (fields[i] == null) continue; buffer.append(tabs.toString()); fields[i].setAccessible(true); buffer.append(fields[i].getName()); buffer.append("="); try { Object value = fields[i].get(o); if (value != null) { if (excludeList.contains(value)) { buffer.append("circular reference"); } else if ((value.getClass().isPrimitive()) || (value.getClass() == java.lang.Long.class) || (value.getClass() == java.lang.String.class) || (value.getClass() == java.lang.Integer.class) || (value.getClass() == java.lang.Boolean.class)) { buffer.append(value); } else { buffer.append(dumpFields(value, callCount, excludeList)); } } } catch (IllegalAccessException e) { System.out.println("IllegalAccessException: " + e.getMessage()); } buffer.append("\n"); } oClass = oClass.getSuperclass(); } buffer.append(tabs.toString()); buffer.append("}\n"); } return buffer.toString(); } The method is initially called like this: System.out.println(dumpFields(obj, 0, null); So, basically I added an excludeList which contains all the previousely checked objects. Now, if an object contains another object and that object links back to the original object, it should not follow that object further down the chain. However, my logic seems to have a flaw as I still get stuck in an infinite loop. Does anyone know why this is happening?

  Read the article

• Quick guide to Oracle IRM 11g: Server configuration

  - by Simon Thorpe

  Quick guide to Oracle IRM 11g index Welcome to the second article in this quick quide to Oracle IRM 11g. Hopefully you've just finished the first article which takes you through deploying the software onto a Linux server. This article walks you through the configuration of this new service and contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Create IRM WebLogic Domain Starting the Admin Server and initial configuration Introduction In the previous article the database was prepared, the WebLogic Application Server installed and the files required for an IRM server installed. But we don't actually have a configured system yet. We need to now create a WebLogic Domain in which the IRM server will run, then configure some of the settings and crypography so that we can create a context and be ready to seal some content and test it all works. This article doesn't cover the configuration of SSL communication from client to server. This is quite a big topic and a separate article has been dedicated for this area. In these articles I also use the hostname, irm.company.internal to reference the IRM server and later on use the hostname irm.company.com in reference to the public facing service. Create IRM WebLogic Domain First step is creating the WebLogic domain, in a console switch to the newly created IRM installation folder as shown below and we will run the domain configuration wizard. [oracle@irm /]$ cd /oracle/middleware/Oracle_IRM/common/bin [oracle@irm bin]$ ./config.sh First thing the wizard will ask is if you wish to create a new or extend an existing domain. This guide is creating a standalone system so you should select to create a new domain. Next step is to choose what technologies from the Oracle ECM Suite you wish this domain to host. You are only interested in selecting the option "Oracle Information Rights Management". When you select this check box you will notice that it also selects "Oracle Enterprise Manager" and "Oracle JRF" as these are dependencies of the IRM server. You then need to specify where you wish to place the domain files. I usually just change the domain name from base_domain or irm_domain and leave the others with their defaults. Now the domain will have a single user initially and by default this user is called "weblogic". I usually change this account name to "sysadmin" or "administrator", but in this guide lets just accept the default. With respects to the next dialog, again for eval or dev reasons, leave the server startup mode as development. The JDK should also be automatically detected. We now need to provide details of the database. This guide is using the Oracle 11gR2 database and the settings I used can be seen in the image to the right. There is a lot of configuration that can now be done for the admin server, any managed servers and where the deployments reside. In this guide I am leaving all of these to their defaults so do not check any of the boxes. However I will on this blog be detailing later how you can go back and setup things such as automated startup of an IRM server which require changes to these default settings. But for now, lets leave it all alone and just click next. Now we are ready to install. Note that from this dialog you can scroll the left window and see there are going to be two servers created from the defaults. The AdminServer which is where you modify settings for the WebLogic Server and also hosts the Oracle Enterprise Manager for IRM which allows to monitor the IRM service performance and also make service related settings (which we shortly do below) and the IRM_server1 which hosts the actual IRM services themselves. So go right ahead and hit create, the process is pretty quick and usually under 10 minutes. When the domain creation ends, it will give you the URL to the admin server. It's worth noting this down and the URL is usually; http://irm.company.internal:7001 Starting the Admin Server and initial configuration First thing to do is to start the WebLogic Admin server and review the initial IRM server settings. In this guide we are going to run the Admin server and IRM server in console windows, in another article I will discuss running these as background services. So for now, start a console and run the Admin server by doing the following. cd /oracle/middleware/user_projects/domains/irm_domain/ ./startWebLogic.sh Wait for the server to start, you are looking for the following line to be reported in the console window. <BEA-00360><Server started in RUNNING mode> First step is configuring the IRM service via Enterprise Manager. Now that the Admin server is running you can point a browser at http://irm.company.internal:7001/em. Login with the username and password you supplied when you created the domain. In Enterprise Manager the IRM service administrator is able to make server wide configuration. However finding where to access the pages with these settings can be a bit of a challenge. After logging in on the left you'll see a tree containing elements of the Enterprise Manager farm Farm_irm_domain. Open up Content Management, then Information Rights Management and finally select the IRM node. On the right then select the IRM menu item, navigate to the Administration section and now we have four options, for now, we are just going to look at General Settings. The image on the right proves that a picture is worth a thousand words (or 113 in this case). The General Settings page allows you to set the cryptographic algorithms used for protecting sealed content. Unless you have a burning need to increase the key lengths or you need to comply to a regulation or government mandate, AES192 is a good start. You can change this later on without worry. The most important setting here we need to make is the Server URL. In this blog article I go over why this URL is so important, basically every single piece of content you protect with Oracle IRM is going to have this URL embedded in it, so if it's wrong or unresolvable, then nobody can open the secured documents. Note that in our environment we have yet to do any SSL configuration of the service. If you intend to build a server without SSL, then use http as the protocol instead of https. But I would recommend using SSL and setting this up is described in the next article. I would also probably up the device count from 1 to 3. This means that any user can retrieve rights to access content onto 3 computers at any one time. The default of 1 doesn't really make sense in development, evaluation nor even production environments and my experience is that 3 is a better number. Next step is to create the keystore for the IRM server. When a classification (called a context) is created, Oracle IRM generates a unique set of symmetric keys which are used to secure the content itself. These keys are then encrypted with a set of "wrapper" asymmetric cryptography keys which are stored externally to the server either in a Java Key Store or a HSM. These keys need to be generated and the following shows my commands and the resulting output. I have greyed out the responses from the commands so you can see the input a little easier. [oracle@irmsrv ~]$ cd /oracle/middleware/wlserver_10.3/server/bin/ [oracle@irmsrv bin]$ ./setWLSEnv.sh CLASSPATH=/oracle/middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/middleware/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_18/lib/tools.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/oracle/middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar: PATH=/oracle/middleware/wlserver_10.3/server/bin:/oracle/middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_18/jre/bin:/usr/java/jdk1.6.0_18/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin Your environment has been set. [oracle@irmsrv bin]$ cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irmsrv fmwconfig]$ keytool -genkeypair -alias oracle.irm.wrap -keyalg RSA -keysize 2048 -keystore irm.jks Enter keystore password: Re-enter new password: What is your first and last name? [Unknown]: Simon Thorpe What is the name of your organizational unit? [Unknown]: Oracle What is the name of your organization? [Unknown]: Oracle What is the name of your City or Locality? [Unknown]: San Francisco What is the name of your State or Province? [Unknown]: CA What is the two-letter country code for this unit? [Unknown]: US Is CN=Simon Thorpe, OU=Oracle, O=Oracle, L=San Francisco, ST=CA, C=US correct? [no]: yes Enter key password for (RETURN if same as keystore password): At this point we now have an irm.jks in the directory /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig. The reason we store it here is this folder would be backed up as part of a domain backup. As with any cryptographic technology, DO NOT LOSE THESE KEYS OR THIS KEY STORE. Once you've sealed content against a context, the keys will be wrapped with these keys, lose these keys, and you can't get access to any secured content, pretty important. Now we've got the keys created, we need to go back to the IRM Enterprise Manager and set the location of the key store. Going back to the General Settings page in Enterprise Manager scroll down to Keystore Settings. Leave the type as JKS but change the location to; /oracle/Middleware/user_projects/domains/irm_domain/config/fmwconfig/irm.jks and hit Apply. The final step with regards to the key store is we need to tell the server what the password is for the Java Key Store so that it can be opened and the keys accessed. Once more fire up a console window and run these commands (again i've greyed out the clutter to see the commands easier). You will see dummy passed into the commands, this is because the command asks for a username, but in this instance we don't use one, hence the value dummy is passed and it isn't used. [oracle@irmsrv fmwconfig]$ cd /oracle/middleware/Oracle_IRM/common/bin/ [oracle@irmsrv bin]$ ./wlst.sh ... lots of settings fly by... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline>connect('weblogic','password','t3://irmsrv.us.oracle.com:7001') Connecting to t3://irmsrv.us.oracle.com:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'irm_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/irm_domain/serverConfig>createCred("IRM","keystore:irm.jks","dummy","password") Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime)wls:/irm_domain/serverConfig>createCred("IRM","key:irm.jks:oracle.irm.wrap","dummy","password") Already in Domain Runtime Tree wls:/irm_domain/serverConfig> At last we are now ready to fire up the IRM server itself. The domain creation created a managed server called IRM_server1 and we need to start this, use the following commands in a new console window. cd /oracle/middleware/user_projects/domains/irm_domain/bin/ ./startManagedWebLogic.sh IRM_server1 This will start up the server in the console, unlike the Admin server, you need to provide the username and password for the service to start. Enter in your weblogic username and password when prompted. You can change this behavior by putting the password into a boot.properties file, read more about this in the WebLogic Server documentation. Once running, wait until you see the line; <Notice><WebLogicServer><BEA-000360><Server started in RUNNING mode> At this point we can now login to the Oracle IRM Management Website at the URL. http://irm.company.internal:1600/irm_rights/ The server is just configured for HTTP at the moment, no SSL involved. Just want to ensure we can get a working system up and running. You should now see a login like the image on the right and you can now login using your weblogic username and password. The next article in this guide goes over adding SSL and now testing your server by actually adding a few users, sealing some content and opening this content as a user.

  Read the article

• How can I get WAMP and a domain name to work on a non-standard port?

  - by David Murdoch

  I have read countless articles on setting up a domain on WAMP to listen on a port other than 80; none of them are working. I've got Windows Server 2008 (Standard) with IIS 7 installed and running on port 80 (and 443). I've got WAMP installed with the following configuration. Listen 81 ServerName sub.example.com:81 DocumentRoot "C:/Path/To/www" <Directory "C:/Path/To/www"> Options All MultiViews AllowOverride All # onlineoffline tag - don't remove Order Allow,Deny Allow from all </Directory> localhost:81 works with the above configuration but sub.example.com:81 does not. Just to make sure my firewall wasn't getting in the way I have disabled it completely. My sub.example.com domain is already pointing to my server and works on IIS on port 80. Also, if I disable IIS and change the Apache port from 81 to 80 it works. Yes, I am restarting Apache after each httpd.conf change. :-) I don't need any other domain (or sub domains [I don't even care about localhost]) configured which is why I'm not using a VirtualHost. Any ideas what is going on here? What could I be doing wrong? Update Changing Listen to 80 but keeping ServerName as sub.example.com:81 causes navigation to sub.example.com:80 to work; this just doesn't seem right to me. Could ServerName be ignoring the :port part somehow? netstat -a -n | find "TCP": >netstat -a -n | find "TCP" TCP 0.0.0.0:81 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:912 0.0.0.0:0 LISTENING ... TCP 127.0.0.1:81 127.0.0.1:49709 TIME_WAIT ...

  Read the article

• What breaks in a Windows domain if a member has a high time skew?

  - by Ryan Ries

  It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

  Read the article

• Returning a 404 page when a folder is accessed from one domain, but allowing access from other domains and IP addresses

  - by okw

  Situation: I want to return a 404 page ("404.php") when a folder ("hidden") is accessed from the example.com domain. I want the same folder to be accessible from a subdomain ("hidden.example.com") or from a different domain ("hidden.com") which are both configured in a single VirtualHost entry. The server has multiple IP addresses that it listens on. Each IP address serves identical content from the example.com domain (sharing a VirtualHost entry.) I want the folder to be accessible from the IP address. The server is configured to use SSL/TLS/HTTPS. HTTPS is optional on example.com, but HTTPS is enforced in the .htaccess file for the hidden folder using a rewrite rule shown below. /www/hidden/.htaccess RewriteCond %{HTTPS} !=on RewriteRule .* https://%{SERVER_NAME}%{REQUEST_URI} [R,L] I know that {SERVER_ADDR} gives the server's IP address, but does it return the one that the client is requesting from? I'm also starting to think that something in the VirtualHosts file would be more appropriate. Any thoughts on this? What should be allowed: http://87.65.43.21/hidden/ https://87.65.43.21/hidden/ http://12.34.56.78/hidden/ https://12.34.56.78/hidden/ http://hidden.example.com/ https://hidden.example.com/ http://hidden.com/ https://hidden.com/ http://www.hidden.com/ https://www.hidden.com/ What should be 404-ed with 404.php http://example.com/hidden/ https://example.com/hidden/ http://www.example.com/hidden/ https://www.example.com/hidden/ http://example.com/hidden/hiddenfile.php https://example.com/hidden/hiddenfile.php etc. Thanks.

  Read the article

• Migrate users from one Active Directory domain to another?

  - by Matt

  I work for a company that hosts desktops for a number of different companies. At the moment, all the clients access a single domain controller called HOSTING. Under that are groups for each company. Each of the hosting servers exist on the same network and so are therefore potentially browseable by other terminal servers. This has raised some security issues and I've found it a little tricky to manage the security. As well, it's possible to see who the other hosted companies are even though other users cannot see their data. What I'd like to do is isolate each clients terminal server/s into their own VLAN. In addition, I'm thinking that each TS would have it's own DC which could just run on the TS for that company. Overhead for a DC is fairly minimal. This would isolate users on that TS from seeing the other companies completely. Firstly, does this sound like a sensible plan? Second... if it is sensible, how would I go about pulling the accounts from the HOSTING domain to a new domain? ideally, without the need for users to change their passwords?

  Read the article

• How do I log back into a Windows Server 2003 guest OS after Hyper-V integration services installs and breaks my domain logins?

  - by Warren P

  After installing Hyper-V integration services, I appear to have a problem with logging in to my Windows Server 2003 virtual machine. Incorrect passwords and logins give the usual error message, but a correct login/password gives me this message: Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator for assistance. Nothing pleases me more than Microsoft telling me (the ersatz system administrator) to contact my system administrator for help, when I suspect that I'm hooped. The virtual machine has a valid network connection, and has decided to invalidate all my previous logins on this account, so I can't log in and remotely fix anything, and I can't remotely connect to it from outside either. This appears to be a catch 22. Unfortunately I don't know any non-domain local logins for this virtual machine, so I suspect I am basically hooped, or that I need ophcrack. is there any alternative to ophcrack? Second and related question; I used Disk2VHD to do the conversion, and I could log in fine several times, until after the Hyper-V integration services were installed, then suddenly this happens and I can't log in now - was there something I did wrong? I can't get networking working inside the VM BEFORE I install integration services, and at the very moment that integration services is being installed, I'm getting locked out like this. I probably should always know the local login of any machine I'm upgrading so I don't get stuck like this in the future.... great. Now I am reminded again of this.

  Read the article

• Is there a standard method for assigning nameservers to servers in a Windows domain?

  - by HopelessN00b

  As the title asks, I'm wondering if there's any standard or "best practice" for how to actually assign nameservers (DNS) and manage the nameserver configuration for client servers on a Windows domain. I'm talking about the setting circled in the below image, in case the language of the question is not clear enough: This is for a large, multi-site environment, where ideally/hopefully all servers point at their site's Domain Controller as the primary DNS server, and a DNS server at a different site as the secondary DNS server. For simplicity's sake, we can say that the secondary server would be the Domain Controller at the home site for everyone, and there are no tertiary DNS servers (even though that's not actually the case). Try as I might, I can't seem to find a GPO setting for this (at least on FL 2003 R2, the Computer Configuration - Administrative Templates - Network - DNS Client - DNS Servers GPO is Supported on: Windows XP Professional only), and I find it rather hard to believe that the "best"/"standard" solution would therefore be either scripting up something to apply the DNS settings per site, or using a DHCP server to push those configurations out to the other servers via the DHCP Scope Options. So, is there a standard way of managing this configuration? (That's hopefully not "a script" or "DHCP Scope Option.)

  Read the article

• Writing a method to 'transform' an immutable object: how should I approach this?

  - by Prog

  (While this question has to do with a concrete coding dilemma, it's mostly about what's the best way to design a function.) I'm writing a method that should take two Color objects, and gradually transform the first Color into the second one, creating an animation. The method will be in a utility class. My problem is that Color is an immutable object. That means that I can't do color.setRGB or color.setBlue inside a loop in the method. What I can do, is instantiate a new Color and return it from the method. But then I won't be able to gradually change the color. So I thought of three possible solutions: 1- The client code includes the method call inside a loop. For example: int duration = 1500; // duration of the animation in milliseconds int steps = 20; // how many 'cycles' the animation will take for(int i=0; i<steps; i++) color = transformColor(color, targetColor, duration, steps); And the method would look like this: Color transformColor(Color original, Color target, int duration, int steps){ int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted return new Color(newRed, newGreen, newBlue); } The disadvantage of this approach is that the client code has to "do part of the method's job" and include a for loop. The method doesn't do it's work entirely on it's own, which I don't like. 2- Make a mutable Color subclass with methods such as setRed, and pass objects of this class into transformColor. Then it could look something like this: void transformColor(MutableColor original, Color target, int duration){ final int STEPS = 20; int redDiff = target.getRed() - original.getRed(); int redAddition = redDiff / steps; int newRed = original.getRed() + redAddition; // same for green and blue .. for(int i=0; i<STEPS; i++){ original.setRed(original.getRed() + redAddition); // same for green and blue .. Thread.sleep(duration / STEPS); // exception handling omitted } } Then the calling code would usually look something like this: // The method will usually transform colors of JComponents JComponent someComponent = ... ; // setting the Color in JComponent to be a MutableColor Color mutableColor = new MutableColor(someComponent.getForeground()); someComponent.setForeground(mutableColor); // later, transforming the Color in the JComponent transformColor((MutableColor)someComponent.getForeground(), new Color(200,100,150), 2000); The disadvantage is - the need to create a new class MutableColor, and also the need to do casting. 3- Pass into the method the actual mutable object that holds the color. Then the method could do object.setColor or similar every iteration of the loop. Two disadvantages: A- Not so elegant. Passing in the object that holds the color just to transform the color feels unnatural. B- While most of the time this method will be used to transform colors inside JComponent objects, other kinds of objects may have colors too. So the method would need to be overloaded to receive other types, or receive Objects and have instanceof checks inside.. Not optimal. Right now I think I like solution #2 the most, than solution #1 and solution #3 the least. However I'd like to hear your opinions and suggestions regarding this.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• ActionMailer and Exchange

  - by Jason Nerer

  Hello Community, I successfully send Mails via SMTP using my Rails App and my Postfix Server. Now I need to move to an Exchange: Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 that has POP3 and SMTP support enabled. I use actionmailer 1.2.5 and am not able to successfully login to the server while trying to send a mail. In case I use Mail.app sending and recieving works fine as long as I change the authentication schema to "Password". Checking the server looks like so: READ Nov 18 10:37:00.509 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 250-mail.my-mail-server-domain.com Hello [xxx.xxx.xxx.xxx] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK WROTE Nov 18 10:37:00.852 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 AUTH LOGIN READ Nov 18 10:37:01.848 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 235 2.7.0 Authentication successful. So authentication method :login seems to be properly supported. Now when it comes to my configuration for actionmailer it looks like so: ActionMailer::Base.server_settings = { :address => "mail.my-mail-server-domain.com", :port => 25, :domain => "my-mail-server-domain.com", :authentication => :login, :user_name => "myusername", :password => "mypassword" } And I get authentication errors over and over. I also tried to change :user_name => "my-mail-server-domain.com\myusername" :user_name => "my-mail-server-domain.com\\myusername" :user_name => "myusername/my-mail-server-domain.com" :user_name => "[email protected]" but nothing works. Can anyone help me? Regards. Jason

  Read the article

• NTLM Authentication fails when behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. I have sniffed the traffic, and noticed the following: Behind Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx Without Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx 6 200 HTTP host.domain.com /_vti_bin/Webs.asmx When running the code from a network without a proxy server, I successfully Authentication with the server, but when I'm behind the proxy server, the traffic is cut-off at the 5th message, and thus don't succeed. I know from the Java docs that On Microsoft Windows platforms, NTLM authentication attempts to acquire the user credentials from the system without prompting the user's authenticator object. If these credentials are not accepted by the server then the user's authenticator will be called. Given that my Authentication code is called only ones, and only as the 5th attempt, it appears as if the connection is dropped when behind the proxy server before my Authentication object is used. Is there any way I can control the behavior of Authentication module, to not have it use the system credentials? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text Br Jan

  Read the article

• do not allow integrated windows authentication *for one of the domains*

  - by MK

  We have an ASP.NET web application which uses integrated windows authentication. It is accessed by users from two domains, A and B. A is the primary domain and B is an older domain which is going away. Web application is authenticating users using a group policy which only exists in domain A. Every user in domain B has an account in domain A. The application lives in domain A. There was no trust between the domains. So users from domain A would get silently authenticated and logged into the site. Users from domain B didn't get authenticated automatically and were prompted with the IE popup, to which they authenticated using their domain A credentials and everything worked. Now somebody has set up a trust between the domains and users from domain B get authenticated silently to IIS, and then their login fails (no group policy). So the question is: can I either programmatically or in IIS configuration make it so that users from domain B still get prompted even though there is trust between the domains? Is there a way to tell the server where IIS is running to ignore the trust relationship maybe?

  Read the article

• Finding out the windows group by virtue of which a user is able to access a database in sql server?

  - by Raghu Dodda

  There is a SQL Server 2005 database with mixed-mode authentication. Among others, we have the following logins on the server: our-domain\developers-group-1, and our-domain\developers-group-2 which are AD groups. The our-domain\developer-group-2 is added to the sysadmin role on the server, by virture of which all domain users of that group can access any database as SQL Server implictly maps the sysadmin role to the dbo user in each database. There are two users our-domain\good-user and our-domain\bad-user The issue is the following: Both the good-user and the bad-user have the exact same AD group memberships. They are both members of our-domain\developers-group-1 and our-domain\developers-group-2. The good-user is able to access all the databases, and the bad-user is not. The bad-user is able to login, but he is unable access any databases. By the way, I am the good-user. How do I go about finding out why? Here's what I tried so far: When I do print current_user, I get dbo When I do print system_user, I get my-domain\good-user When I do select * from fn_my_permissions(NULL, 'SERVER'), I see permissions. But if do execute as user='my-domain\good-user'; select * from fn_my_permissions(NULL, 'SERVER'), I dont see any permisisons. And When I do, execute as user='my-domain\bad-user'; select * from fn_my_permissions(NULL, 'SERVER'), I dont see any permisisons. Also, I was wondering if there is a sql command that will tell me, "hey! the current database user is able to access this database because he is a member such-and-such ad-group, which is a login that is mapped to such-and-such user in this database".

  Read the article

• Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

  - by Vinko Vrsalovic

  I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de  rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

  Read the article

• Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\INETPUB\VHOSTS\gaehambuilders.com

  - by Kiran RS

  Why I'm getting an error like this - Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\INETPUB\VHOSTS\gaehambuilders.com\httpdocs\contacts.php on line 120 ? Here is my php code, if(isset($_POST['send'])) //if "email" is filled out, send email { //send email $name=$_REQUEST['name']; $email=$_POST['email']; $cnum=$_REQUEST['cnum']; $enq=$_REQUEST['enq']; $email1=$_REQUEST['email']; $to = "[email protected]"; $subject = "Test mail"; $message = "Hello! This is a simple email message."; $from = $email1; $headers = "From:" . $from; mail($to,$subject,$message,$headers); ? alert ("Enquiry form submited successfully ! We'll get back you soon "); Thanks in advance!

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >