dynamic disks - Page 305

Mocking property sets

- by mehfuzh

In this post, i will be showing how you can mock property sets with your expected values or even action using JustMock. To begin, we have a sample interface: public interface IFoo { int Value { get; set; } } Now, we can create a mock that will throw on any call other than the one expected, generally its a strict mock and we can do it like: bool expected = false; var foo = Mock.Create<IFoo>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() => expected = true); foo.Value = 1; Assert.True(expected); Here , the method for running though our expectation for set is Mock.ArrangeSet , where we can directly set our expectations or can even set matchers into it like: var foo = Mock.Create<IFoo>(BehaviorMode.Strict); Mock.ArrangeSet(() => foo.Value = Arg.Matches<int>(x => x > 3)); foo.Value = 4; foo.Value = 5; Assert.Throws<MockException>(() => foo.Value = 3); In the example, any set for value not satisfying matcher expression will throw an MockException as this is a strict mock but what will be the case for loose mocks, where we also have to assert it. Here, let’s take an interface with an indexed property. Indexers are treated in the same way as properties, as with basic indexers let you access your class if it were an array. public interface IFooIndexed { string this[int key] { get; set; } } We want to setup a value for a particular index, we then will pass that mock to some implementer where it will be actually called. Once done, we want to assert that if it has been invoked properly. var foo = Mock.Create<IFooIndexed>(); Mock.ArrangeSet(() => foo[0] = "ping"); foo[0] = "ping"; Mock.AssertSet(() => foo[0] = "ping"); In the above example, both the values are user defined, it might happen that we want to make it more dynamic, In this example, i set it up for set with any value and finally checked if it is set with the one i am looking for. var foo = Mock.Create<IFooIndexed>(); Mock.ArrangeSet(() => foo[0] = Arg.Any<string>()); foo[0] = "ping"; Mock.AssertSet(() => foo[0] = Arg.Matches<string>(x => string.Compare("ping", x) == 0)); This is more or less of mocking user sets , but we can further have it to throw exception or even do our own task for a particular set , like : Mock.ArrangeSet(() => foo.MyProperty = 10).Throws(new ArgumentException()); Or bool expected = false; var foo = Mock.Create<IFoo>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() => expected = true); foo.Value = 1; Assert.True(expected); Or call the original setter , in this example it will throw an NotImplementedExpectation var foo = Mock.Create<FooAbstract>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).CallOriginal(); Assert.Throws<NotImplementedException>(() => { foo.Value = 1; }); Finally, try all these, find issues, post them to forum and make it work for you :-). Hope that helps,

Read the article

ASP.NET: Using pickup directory for outgoing e-mails

- by DigiMortal

Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net> <mailSettings> <smtp deliveryMethod="SpecifiedPickupDirectory"> <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/> </smtp> </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net> <mailSettings> <smtp deliveryMethod="PickupDirectoryFromIis" /> </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

Read the article

Reading train stop display names from a resource bundle

- by Frank Nimphius

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} In Oracle JDeveloper 11g R1, you set the display name of a train stop of an ADF bounded task flow train model by using the Oracle JDeveloper Structure Window. To do so Double-click onto the bounded task flow configuration file (XML) located in the Application Navigator so the task flow diagram open In the task flow diagram, select the view activity node for which you want to define the display name. In the Structure Window., expand the view activity node and then the train-stop node therein Add the display name element by using the right-click context menu on the train-stop node, selecting Insert inside train-stop > Display Name Edit the Display Name value with the Property Inspector Following the steps outlined above, you can define static display names – like "PF1" for page fragment 1 shown in the image below - for train stops to show at runtime. In the following, I explain how you can change the static display string to a dynamic string that reads the display label from a resource bundle so train stop labels can be internationalized. There are different strategies available for managing message bundles within an Oracle JDeveloper project. In this blog entry, I decided to build and configure the default properties file as indicated by the projects properties. To learn about the suggested file name and location, open the JDeveloper project properties (use a right mouse click on the project node in the Application Navigator and choose Project Properties. Select the Resource Bundle node to see the suggested name and location for the default message bundle. Note that this is the resource bundle that Oracle JDeveloper would automatically create when you assign a text resource to an ADF Faces component in a page. For the train stop display name, we need to create the message bundle manually as there is no context menu help available in Oracle JDeveloper. For this, use a right mouse click on the JDeveloper project and choose New | General | File from the menu and in the opened dialog. Specify the message bundle file name as the name looked up before in the project properties Resource Bundle option. Also, ensure that the file is saved in a directory structure that matches the package structure shown in the Resource Bundle dialog. For example, you would save the properties file in the View Project's src > adf > sample directory if the package structure was "adf.sample" (adf.sample.ViewControllerBundle). Edit the properties file and define key – values pairs for the train stop component. In the sample, such key value pairs are TrainStop1=Train Stop 1 TrainStop2=Train Stop 2 TrainStop3=Train Stop 3 Next, double click the faces-config.xml file and switch the opened editor to the Overview tab. Select the Application category and press the green plus icon next to the Resource Bundle section. Define the resource bundle Base Name as the package and properties file name, for example adf.sample.ViewControllerBundle Finally, define a variable name for the message bundle so the bundle can be accessed from Expression Language. For this blog example, the name is chosen as "messageBundle". <resource-bundle> <base-name>adf.sample.ViewControllerBundle</base-name> <var>messageBundle</var> </resource-bundle> Next, select the display-name element in the train stop node (similar to when creating the display name) and use the Property Inspector to change the static display string to an EL expression referencing the message bundle. For example: #{messageBundle.TrainStop1} At runtime, the train stops now show display names read from a message bundle (the properties file).

Read the article

Best way to store a large amount of game objects and update the ones onscreen

- by user3002473

Good afternoon guys! I'm a young beginner game developer working on my first large scale game project and I've run into a situation where I'm not quite sure what the best solution may be (if there is a lone solution). The question may be vague (if anyone can think of a better title after having read the question, please edit it) or broad but I'm not quite sure what to do and I thought it would help just to discuss the problem with people more educated in the field. Before we get started, here are some of the questions I've looked at for help in the past: Best way to keep track of game objects Elegant way to simulate large amounts of entities within a game world What is the most efficient container to store dynamic game objects in? I've also read articles about different data structures commonly used in games to store game objects such as this one about slot maps, but none of them are really what I'm looking for. Also, if it helps at all I'm using Python 3 to design the game. It has to be Python 3, if I could I would use C++ or Unityscript or something else, but I'm restricted to having to use Python 3. My game will be a form of side scroller shooter game. In said game the player will traverse large rooms with large amounts of enemies and other game objects to update (think some of the larger areas in Cave Story or Iji). The player obviously can't see the entire room all at once, so there is a viewport that follows the player around and renders only a selection of the room and the game objects that it contains. This is not a foreign concept. The part that's getting me confused has to do with how certain game objects are updated. Some of them are to be updated constantly, regardless of whether or not they can be seen. Other objects however are only to be updated when they are onscreen (for example, an enemy would only be updated to react to the player when it is onscreen or when it is in a certain range of the screen). Another problem is that game objects have to be easily referable by other game objects; something that happens in the player's update() method may affect another object in the world. Collision detection in games is always a serious problem. I need a way of containing the game objects such that it minimizes the number of cases when testing for collisions against one another. The final problem is that of creating and destroying game objects. I think this problem is pretty self explanatory. To store the game objects then I've considered a number of different methods. The original method I had was to simply store all the objects in a hash table by an id. This method was simple, and decently fast as it allows all the objects to be looked up in O(1) complexity, and also allows them to be deleted fairly easily. Hash collisions would not be a major problem; I wasn't originally planning on using computer generated ids to store the game objects I was going to rely on them all using ids given to them by the game designer (such names would be strings like 'Player' or 'EnemyWeapon4'), and even if I did use computer generated ids, if I used a decent hashing algorithm then the chances of collisions would be around 1 in 4 billion. The problem with using a hash table however is that it is inefficient in checking to see what objects are in range of the viewport. Considering the fact that certain game objects move (as well as the viewport itself), the only solution I could think of in order to only update objects that are in the viewport would be to iterate through every object in the hash table and check if it is in the viewport or not, updating only the ones that are in the valid area. This would be incredibly slow in scenarios where the amount of game objects exceeds 500, or even 200. The second solution was to store everything in a 2-d list. The world is partitioned up into cells (a tilemap essentially), where each cell or tile is the same size and is square. Each cell would contain a list of the game objects that are currently occupying it (each game object would be inserted into a cell depending on the center of the object's collision mask). A 2-d list would allow me to take the top-left and bottom-right corners of the viewport and easily grab a rectangular area of the grid containing only the cells containing entities that are in valid range to be updated. This method also solves the problem of collision detection; when I take an entity I can find the cell that it is currently in, then check only against entities in it's cell and the 8 cells around it. One problem with this system however is that it prohibits easy lookup of game objects. One solution I had would be to simultaneously keep a hash table that would contain all the positions of the objects in the 2-d list indexed by the id of said object. The major problem with a 2-d list is that it would need to be rebuilt every single game frame (along with the hash table of object positions), which may be a serious detriment to game speed. Both systems have ups and downs and seem to solve some of each other's problems, however using them both together doesn't seem like the best solution either. If anyone has any thoughts, ideas, suggestions, comments, opinions or solutions on new data structures or better implementations of the existing data structures I have in mind, please post, any and all criticism and help is welcome. Thanks in advance! EDIT: Please don't close the question because it has a bad title, I'm just bad with names!

Read the article

ASMLib

- by wcoekaer

Oracle ASMlib on Linux has been a topic of discussion a number of times since it was released way back when in 2004. There is a lot of confusion around it and certainly a lot of misinformation out there for no good reason. Let me try to give a bit of history around Oracle ASMLib. Oracle ASMLib was introduced at the time Oracle released Oracle Database 10g R1. 10gR1 introduced a very cool important new features called Oracle ASM (Automatic Storage Management). A very simplistic description would be that this is a very sophisticated volume manager for Oracle data. Give your devices directly to the ASM instance and we manage the storage for you, clustered, highly available, redundant, performance, etc, etc... We recommend using Oracle ASM for all database deployments, single instance or clustered (RAC). The ASM instance manages the storage and every Oracle server process opens and operates on the storage devices like it would open and operate on regular datafiles or raw devices. So by default since 10gR1 up to today, we do not interact differently with ASM managed block devices than we did before with a datafile being mapped to a raw device. All of this is without ASMLib, so ignore that one for now. Standard Oracle on any platform that we support (Linux, Windows, Solaris, AIX, ...) does it the exact same way. You start an ASM instance, it handles storage management, all the database instances use and open that storage and read/write from/to it. There are no extra pieces of software needed, including on Linux. ASM is fully functional and selfcontained without any other components. In order for the admin to provide a raw device to ASM or to the database, it has to have persistent device naming. If you booted up a server where a raw disk was named /dev/sdf and you give it to ASM (or even just creating a tablespace without asm on that device with datafile '/dev/sdf') and next time you boot up and that device is now /dev/sdg, you end up with an error. Just like you can't just change datafile names, you can't change device filenames without telling the database, or ASM. persistent device naming on Linux, especially back in those days ways to say it bluntly, a nightmare. In fact there were a number of issues (dating back to 2004) : Linux async IO wasn't pretty persistent device naming including permissions (had to be owned by oracle and the dba group) was very, very difficult to manage system resource usage in terms of open file descriptors So given the above, we tried to find a way to make this easier on the admins, in many ways, similar to why we started working on OCFS a few years earlier - how can we make life easier for the admins on Linux. A feature of Oracle ASM is the ability for third parties to write an extension using what's called ASMLib. It is possible for any third party OS or storage vendor to write a library using a specific Oracle defined interface that gets used by the ASM instance and by the database instance when available. This interface offered 2 components : Define an IO interface - allow any IO to the devices to go through ASMLib Define device discovery - implement an external way of discovering, labeling devices to provide to ASM and the Oracle database instance This is similar to a library that a number of companies have implemented over many years called libODM (Oracle Disk Manager). ODM was specified many years before we introduced ASM and allowed third party vendors to implement their own IO routines so that the database would use this library if installed and make use of the library open/read/write/close,.. routines instead of the standard OS interfaces. PolyServe back in the day used this to optimize their storage solution, Veritas used (and I believe still uses) this for their filesystem. It basically allowed, in particular, filesystem vendors to write libraries that could optimize access to their storage or filesystem.. so ASMLib was not something new, it was basically based on the same model. You have libodm for just database access, you have libasm for asm/database access. Since this library interface existed, we decided to do a reference implementation on Linux. We wrote an ASMLib for Linux that could be used on any Linux platform and other vendors could see how this worked and potentially implement their own solution. As I mentioned earlier, ASMLib and ODMLib are libraries for third party extensions. ASMLib for Linux, since it was a reference implementation implemented both interfaces, the storage discovery part and the IO part. There are 2 components : Oracle ASMLib - the userspace library with config tools (a shared object and some scripts) oracleasm.ko - a kernel module that implements the asm device for /dev/oracleasm/* The userspace library is a binary-only module since it links with and contains Oracle header files but is generic, we only have one asm library for the various Linux platforms. This library is opened by Oracle ASM and by Oracle database processes and this library interacts with the OS through the asm device (/dev/asm). It can install on Oracle Linux, on SuSE SLES, on Red Hat RHEL,.. The library itself doesn't actually care much about the OS version, the kernel module and device cares. The support tools are simple scripts that allow the admin to label devices and scan for disks and devices. This way you can say create an ASM disk label foo on, currently /dev/sdf... So if /dev/sdf disappears and next time is /dev/sdg, we just scan for the label foo and we discover it as /dev/sdg and life goes on without any worry. Also, when the database needs access to the device, we don't have to worry about file permissions or anything it will be taken care of. So it's a convenience thing. The kernel module oracleasm.ko is a Linux kernel module/device driver. It implements a device /dev/oracleasm/* and any and all IO goes through ASMLib - /dev/oracleasm. This kernel module is obviously a very specific Oracle related device driver but it was released under the GPL v2 so anyone could easily build it for their Linux distribution kernels. Advantages for using ASMLib : A good async IO interface for the database, the entire IO interface is based on an optimal ASYNC model for performance A single file descriptor per Oracle process, not one per device or datafile per process reducing # of open filehandles overhead Device scanning and labeling built-in so you do not have to worry about messing with udev or devlabel, permissions or the likes which can be very complex and error prone. Just like with OCFS and OCFS2, each kernel version (major or minor) has to get a new version of the device drivers. We started out building the oracleasm kernel module rpms for many distributions, SLES (in fact in the early days still even for this thing called United Linux) and RHEL. The driver didn't make sense to get pushed into upstream Linux because it's unique and specific to the Oracle database. As it takes a huge effort in terms of build infrastructure and QA and release management to build kernel modules for every architecture, every linux distribution and every major and minor version we worked with the vendors to get them to add this tiny kernel module to their infrastructure. (60k source code file). The folks at SuSE understood this was good for them and their customers and us and added it to SLES. So every build coming from SuSE for SLES contains the oracleasm.ko module. We weren't as successful with other vendors so for quite some time we continued to build it for RHEL and of course as we introduced Oracle Linux end of 2006 also for Oracle Linux. With Oracle Linux it became easy for us because we just added the code to our build system and as we churned out Oracle Linux kernels whether it was for a public release or for customers that needed a one off fix where they also used asmlib, we didn't have to do any extra work it was just all nicely integrated. With the introduction of Oracle Linux's Unbreakable Enterprise Kernel and our interest in being able to exploit ASMLib more, we started working on a very exciting project called Data Integrity. Oracle (Martin Petersen in particular) worked for many years with the T10 standards committee and storage vendors and implemented Linux kernel support for DIF/DIX, data protection in the Linux kernel, note to those that wonder, yes it's all in mainline Linux and under the GPL. This basically gave us all the features in the Linux kernel to checksum a data block, send it to the storage adapter, which can then validate that block and checksum in firmware before it sends it over the wire to the storage array, which can then do another checksum and to the actual DISK which does a final validation before writing the block to the physical media. So what was missing was the ability for a userspace application (read: Oracle RDBMS) to write a block which then has a checksum and validation all the way down to the disk. application to disk. Because we have ASMLib we had an entry into the Linux kernel and Martin added support in ASMLib (kernel driver + userspace) for this functionality. Now, this is all based on relatively current Linux kernels, the oracleasm kernel module depends on the main kernel to have support for it so we can make use of it. Thanks to UEK and us having the ability to ship a more modern, current version of the Linux kernel we were able to introduce this feature into ASMLib for Linux from Oracle. This combined with the fact that we build the asm kernel module when we build every single UEK kernel allowed us to continue improving ASMLib and provide it to our customers. So today, we (Oracle) provide Oracle ASMLib for Oracle Linux and in particular on the Unbreakable Enterprise Kernel. We did the build/testing/delivery of ASMLib for RHEL until RHEL5 but since RHEL6 decided that it was too much effort for us to also maintain all the build and test environments for RHEL and we did not have the ability to use the latest kernel features to introduce the Data Integrity features and we didn't want to end up with multiple versions of asmlib as maintained by us. SuSE SLES still builds and comes with the oracleasm module and they do all the work and RHAT it certainly welcome to do the same. They don't have to rebuild the userspace library, it's really about the kernel module. And finally to re-iterate a few important things : Oracle ASM does not in any way require ASMLib to function completely. ASMlib is a small set of extensions, in particular to make device management easier but there are no extra features exposed through Oracle ASM with ASMLib enabled or disabled. Often customers confuse ASMLib with ASM. again, ASM exists on every Oracle supported OS and on every supported Linux OS, SLES, RHEL, OL withoutASMLib Oracle ASMLib userspace is available for OTN and the kernel module is shipped along with OL/UEK for every build and by SuSE for SLES for every of their builds ASMLib kernel module was built by us for RHEL4 and RHEL5 but we do not build it for RHEL6, nor for the OL6 RHCK kernel. Only for UEK ASMLib for Linux is/was a reference implementation for any third party vendor to be able to offer, if they want to, their own version for their own OS or storage ASMLib as provided by Oracle for Linux continues to be enhanced and evolve and for the kernel module we use UEK as the base OS kernel hope this helps.

Read the article

Meet the New Windows Azure

- by ScottGu

Today we are releasing a major set of improvements to Windows Azure. Below is a short-summary of just a few of them: New Admin Portal and Command Line Tools Today’s release comes with a new Windows Azure portal that will enable you to manage all features and services offered on Windows Azure in a seamless, integrated way. It is very fast and fluid, supports filtering and sorting (making it much easier to use for large deployments), works on all browsers, and offers a lot of great new features – including built-in VM, Web site, Storage, and Cloud Service monitoring support. The new portal is built on top of a REST-based management API within Windows Azure – and everything you can do through the portal can also be programmed directly against this Web API. We are also today releasing command-line tools (which like the portal call the REST Management APIs) to make it even easier to script and automate your administration tasks. We are offering both a Powershell (for Windows) and Bash (for Mac and Linux) set of tools to download. Like our SDKs, the code for these tools is hosted on GitHub under an Apache 2 license. Virtual Machines Windows Azure now supports the ability to deploy and run durable VMs in the cloud. You can easily create these VMs using a new Image Gallery built-into the new Windows Azure Portal, or alternatively upload and run your own custom-built VHD images. Virtual Machines are durable (meaning anything you install within them persists across reboots) and you can use any OS with them. Our built-in image gallery includes both Windows Server images (including the new Windows Server 2012 RC) as well as Linux images (including Ubuntu, CentOS, and SUSE distributions). Once you create a VM instance you can easily Terminal Server or SSH into it in order to configure and customize the VM however you want (and optionally capture your own image snapshot of it to use when creating new VM instances). This provides you with the flexibility to run pretty much any workload within Windows Azure. The new Windows Azure Portal provides a rich set of management features for Virtual Machines – including the ability to monitor and track resource utilization within them. Our new Virtual Machine support also enables the ability to easily attach multiple data-disks to VMs (which you can then mount and format as drives). You can optionally enable geo-replication support on these – which will cause Windows Azure to continuously replicate your storage to a secondary data-center at least 400 miles away from your primary data-center as a backup. We use the same VHD format that is supported with Windows virtualization today (and which we’ve released as an open spec), which enables you to easily migrate existing workloads you might already have virtualized into Windows Azure. We also make it easy to download VHDs from Windows Azure, which also provides the flexibility to easily migrate cloud-based VM workloads to an on-premise environment. All you need to do is download the VHD file and boot it up locally, no import/export steps required. Web Sites Windows Azure now supports the ability to quickly and easily deploy ASP.NET, Node.js and PHP web-sites to a highly scalable cloud environment that allows you to start small (and for free) and then scale up as your traffic grows. You can create a new web site in Azure and have it ready to deploy to in under 10 seconds: The new Windows Azure Portal provides built-in administration support for Web sites – including the ability to monitor and track resource utilization in real-time: You can deploy to web-sites in seconds using FTP, Git, TFS and Web Deploy. We are also releasing tooling updates today for both Visual Studio and Web Matrix that enable developers to seamlessly deploy ASP.NET applications to this new offering. The VS and Web Matrix publishing support includes the ability to deploy SQL databases as part of web site deployment – as well as the ability to incrementally update database schema with a later deployment. You can integrate web application publishing with source control by selecting the “Set up TFS publishing” or “Set up Git publishing” links on a web-site’s dashboard: Doing do will enable integration with our new TFS online service (which enables a full TFS workflow – including elastic build and testing support), or create a Git repository that you can reference as a remote and push deployments to. Once you push a deployment using TFS or Git, the deployments tab will keep track of the deployments you make, and enable you to select an older (or newer) deployment and quickly redeploy your site to that snapshot of the code. This provides a very powerful DevOps workflow experience. Windows Azure now allows you to deploy up to 10 web-sites into a free, shared/multi-tenant hosting environment (where a site you deploy will be one of multiple sites running on a shared set of server resources). This provides an easy way to get started on projects at no cost. You can then optionally upgrade your sites to run in a “reserved mode” that isolates them so that you are the only customer within a virtual machine: And you can elastically scale the amount of resources your sites use – allowing you to increase your reserved instance capacity as your traffic scales: Windows Azure automatically handles load balancing traffic across VM instances, and you get the same, super fast, deployment options (FTP, Git, TFS and Web Deploy) regardless of how many reserved instances you use. With Windows Azure you pay for compute capacity on a per-hour basis – which allows you to scale up and down your resources to match only what you need. Cloud Services and Distributed Caching Windows Azure also supports the ability to build cloud services that support rich multi-tier architectures, automated application management, and scale to extremely large deployments. Previously we referred to this capability as “hosted services” – with this week’s release we are now referring to this capability as “cloud services”. We are also enabling a bunch of new features with them. Distributed Cache One of the really cool new features being enabled with cloud services is a new distributed cache capability that enables you to use and setup a low-latency, in-memory distributed cache within your applications. This cache is isolated for use just by your applications, and does not have any throttling limits. This cache can dynamically grow and shrink elastically (without you have to redeploy your app or make code changes), and supports the full richness of the AppFabric Cache Server API (including regions, high availability, notifications, local cache and more). In addition to supporting the AppFabric Cache Server API, it also now supports the Memcached protocol – allowing you to point code written against Memcached at it (no code changes required). The new distributed cache can be setup to run in one of two ways: 1) Using a co-located approach. In this option you allocate a percentage of memory in your existing web and worker roles to be used by the cache, and then the cache joins the memory into one large distributed cache. Any data put into the cache by one role instance can be accessed by other role instances in your application – regardless of whether the cached data is stored on it or another role. The big benefit with the “co-located” option is that it is free (you don’t have to pay anything to enable it) and it allows you to use what might have been otherwise unused memory within your application VMs. 2) Alternatively, you can add “cache worker roles” to your cloud service that are used solely for caching. These will also be joined into one large distributed cache ring that other roles within your application can access. You can use these roles to cache 10s or 100s of GBs of data in-memory very effectively – and the cache can be elastically increased or decreased at runtime within your application: New SDKs and Tooling Support We have updated all of the Windows Azure SDKs with today’s release to include new features and capabilities. Our SDKs are now available for multiple languages, and all of the source in them is published under an Apache 2 license and and maintained in GitHub repositories. The .NET SDK for Azure has in particular seen a bunch of great improvements with today’s release, and now includes tooling support for both VS 2010 and the VS 2012 RC. We are also now shipping Windows, Mac and Linux SDK downloads for languages that are offered on all of these systems – allowing developers to develop Windows Azure applications using any development operating system. Much, Much More The above is just a short list of some of the improvements that are shipping in either preview or final form today – there is a LOT more in today’s release. These include new Virtual Private Networking capabilities, new Service Bus runtime and tooling support, the public preview of the new Azure Media Services, new Data Centers, significantly upgraded network and storage hardware, SQL Reporting Services, new Identity features, support within 40+ new countries and territories, and much, much more. You can learn more about Windows Azure and sign-up to try it for free at http://windowsazure.com. You can also watch a live keynote I’m giving at 1pm June 7th (later today) where I’ll walk through all of the new features. We will be opening up the new features I discussed above for public usage a few hours after the keynote concludes. We are really excited to see the great applications you build with them. Hope this helps, Scott

Read the article

BizTalk: Sample: Context routing and Throttling with orchestration

- by Leonid Ganeline

The sample demonstrates using orchestration for throttling and using context routing. Usually throttling is implemented on the host level (in BizTalk 2010 we can also using the host instance level throttling). Here is demonstrated the throttling with orchestration convoy that slows down message flow from some customers. Sample implements sort of quality service agreement layer for different kind of customers. The sample demonstrates the context routing between orchestrations. It has several advantages over the content routing. For example, we don’t have to create the property schema and promote properties on the schemas; we don’t have to change the message content to change routing. Use case: The BizTalk application has a main processing orchestration that process all input messages. The application usually works as an OLTP application. Input messages came in random order without peaks, typical scenario for the on-line users. But sometimes the big data batch payloads come. These batches overload processing orchestrations. All processes, activated by on-line users after the payload, come to the same queue and are processed only after the payload. Result is on-line users can see significant delay in processing. It can be minutes or hours, depending of the batch size. Requirements: On-line user’s processing should work without delays. Big batches cannot disturb on-line users. There should be higher priority for the on-line users and the lower priority for the batches. Design: Decision is to divide the message flow in two branches, one for on-line users and second for batches. Branch with batches provides messages to the processing line with low priority, and the on-line user’s branch – with high priority. All messages are provided by hi-speed receive port. BTS.ReceivePortName context property is used for routing. The Router orchestration separates messages sent from on-line users and from the batch messages. But the Router does not use the BizTalk provided value of this property, the Router set up this value by itself. Router uses the content of the messages to decide if it is from on-line users or from batches. The message context property the BTS.ReceivePortName is changed respectively, its value works as a recipient address, as the “To” address for the next recipient orchestrations. Those next orchestrations are the BatchBottleneck and the MainProcess orchestrations. Messages with context equal “ToBatch” are filtered up by the BatchBottleneck orchestration. It is a unified convoy orchestration and it throttles the message flow, delaying the message delivery to the MainProcess orchestration. The BatchBottleneck orchestration changes the message context to the “ToProcess” and sends messages one after another with small delay in between. Delay can be configured in the BizTalk config file as: <appSettings> <add key="GLD_Tests_TwoWayRouting_BatchBottleneck_DelayMillisec" value="100"/> </appSettings> Of course, messages with context equal “ToProcess” are filtered up by the MainProcess orchestration. NOTES: Filters with string values: In Orchestrations (the first Receive shape in orchestration) use string values WITH quotes; in Send Ports use string values WITHOUT quotes. Filters on the Send Ports are dynamic; we can change them in run-time. Filters on the Orchestrations are static; we can change them only in design-time. To check the existence of the promoted property inside orchestration use the Expression shape with construction like this: if (BTS.ReceivePortName exists myMessage) { …; } It is not possible in the Message Assignment shape because using the “if” statement inside Message Assignment is prohibited. Several predefined context properties can behave in specific way. Say MessageTracking.OriginatingMessage or XMLNORM.DocumentSpecName, they are required some internal rules should be applied to the format or usage of this properties. MessageTracking.* parameters require you have to use tracking and you can get unexpected run-time errors in some cases. My recommendation is - use very limited set of the predefined context properties. To “attach” the new promoted property to the message, we have to use correlation. The correlation type should include this property. [Here is a good explanation by Saravana ] The sample code is here [sorry, temporary trubles with CodePlex].

Read the article

jqGrid - dynamically load different drop down values for different rows depending on another column value

- by Renso

Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it. var acctId = $('#Id').val(); var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText; var lookupData = eval('(' + data + ')'); var listingCategory = lookupData.ListingCategory; var listingStatus = lookupData.ListingStatus; var catList = '{'; $(lookupData.ListingCategory).each(function() { catList += this.Id + ':"' + this.Name + '",'; }); catList += '}'; var lastsel; var ignoreAlert = true; $(item) .jqGrid({ url: listURL, postData: '', datatype: "local", colNames: ['Id', 'Name', 'Commission Rep', 'Business Group', 'Order Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product Type', 'Online/ Magazine', 'Materials', 'Special Placement', 'Logo', 'Image', 'Text', 'Contact Info', 'Everthing In', 'Category', 'Status'], colModel: [ { name: 'Id', index: 'Id', hidden: true, hidedlg: true }, { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 }, { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 }, { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} } ], jsonReader: { root: "List", page: "CurrentPage", total: "TotalPages", records: "TotalRecords", userdata: "Errors", repeatitems: false, id: "0" }, rowNum: $rows, rowList: [10, 20, 50, 200, 500, 1000, 2000], imgpath: jQueryImageRoot, pager: $(item + 'Pager'), shrinkToFit: true, width: 1455, recordtext: 'Traffic lines', sortname: 'OrderDate', viewrecords: true, sortorder: "asc", altRows: true, cellEdit: true, cellsubmit: "remote", cellurl: editURL + '?rows=' + $rows + '&page=1', loadComplete: function() { }, gridComplete: function() { }, loadError: function(xhr, st, err) { }, afterEditCell: function(rowid, cellname, value, iRow, iCol) { var select = $(item).find('td.edit-cell select'); $(item).find('td.edit-cell select option').each(function() { var option = $(this); var optionId = $(this).val(); $(lookupData.ListingCategory).each(function() { if (this.Id == optionId) { if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) { option.remove(); return false; } } }); }); }, search: true, searchdata: {}, caption: "List of all Traffic lines", editurl: editURL + '?rows=' + $rows + '&page=1', hiddengrid: hideGrid Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

Read the article

Seizing the Moment with Mobility

- by Divya Malik

Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog. Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

Read the article

Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

- by Anand Akela

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter using hash tag #em12c or at Facebook . Stay Connected: Twitter | Face book | You Tube | Linked in | Newsletter

Read the article

jQuery Templates, Data Link

- by Renso

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Query Templates, Data Link, and Globalization I am sure you must have read Scott Guthrie’s blog post about jQuery support and officially supporting jQuery's templating, data linking and globalization, if not here it is: jQuery Templating Since we are an open source shop and use jQuery and jQuery plugins extensively to say the least, decided to look into the templating a bit and see what data linking is all about. For those not familiar with those terms here is the summary, plenty of material out there on what it is, but here is what in my experience it means: jQuery Templating: A templating engine that allows you to specify a client-side template where you indicate which properties/tags you want dynamically updated. You in a sense specify which parts of the html is dynamic and since it is pluggable you are able to use tools data jQuery data linking and others to let it sync up your template with data. What makes it more powerful is that you can easily work with rows of data, adding and removing rows. Once the template has been generated, which you do dynamically on a client-side event, you then append/inject the resulting template somewhere in your DOM, like for example you would get a JSON object from the database, map it to your template, it populates the template with your data in the indicated places, and then let’s say for example append it to a row in a table. I have not found it that useful for lets say a single record of data since you could easily just get a partial view from the server via an html type ajax call. It really shines when you dynamically add/remove rows from a list in the DOM. I have not found an alternative that meets the functionality of the jQuery template and helps of course that Microsoft officially supports it. In future versions of the jQuery plug-in it may even ship as part of the standard jQuery library and with future versions of Visual Studio. jQuery Data Linking: In short I was fascinated by it initially by how with one line of code I can sync up my JSON object with my form elements. That's where my enthusiasm stopped. It was one-line to let is deal with syncing up your form with your JSON object, but it is not bidirectional as they state and I tried all the work arounds they suggested and none of them work. The problem is that when you update your JSON object it DOES NOT sync it up with your form. In an example, accounts are being edited client side by selecting the account from a list by clicking on the row, it then fetches the entire account JSON object via ajax json-type call and then refreshes the form with the account’s details from the new JSON object. What is the use of syncing up my JSON with the form if I still have to programmatically sync up my new JSON object with each DOM property?! So you may ask: “what is the alternative”? Good question and the same one I was pondering, maybe I can just use it for keeping my from n sync with my JSON object so I can post that JSON object back to the server and update my database. That’s when I discovered Knockout: Knockout It addresses the issues mentioned above and also supports event handling through the observer pattern. Not wanting to go into detail here, Steve Sanderson, the creator of Knockout, has already done a terrific job of that, thanks Steve for a great plug-in! Best of all it integrates perfectly with the jQuery Templating engine as well. I have not found an alternative to this plugin that supports the depth and width of functionality and would recommend it to anyone. The only drawback is the embedded html attributes (data-bind=””) tags that you have to add to the HTML, in my opinion tying your behavior to your HTML, where I like to separate behavior from HTML as well as CSS, so the HTML is purely to define content, not styling or behavior. But there are plusses to this as well and also a nifty work around to this that I will just shortly mention here with an example. Instead of data binding an html tag with knockout event handling like so: <%=Html.TextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> Do: <%=Html.DataBoundTextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> The html extension above then takes care of the internals and you could then swap Knockout for something else if you want to inside the extension and keep the HTML plugin agnostic. Here is what the extension looks like, you can easily build a whole library to support all kinds of data binding options from this: public static class HtmlExtensions { public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes) { var dic = new RouteValueDictionary(htmlAttributes); dic.Add("data-bind", String.Format("value: {0}", name)); return helper.TextBox(name, value, dic); } } Hope this helps in making a decision when and where to consider jQuery templating, data linking and Knockout.

Read the article

Application Composer Series: Where and When to use Groovy

- by Richard Bingham

This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

Read the article

My rhythm game runs choppy even with high frame rate

- by felipedrl

I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

Read the article

ADF Business Components

- by Arda Eralp

ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive. ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application

Read the article

Windows Phone 8 Announcement

- by Tim Murphy

As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall. That itself is great news, but the features coming were like confetti flying in all different directions. Given this speed I couldn’t capture every feature they covered. A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8. It will also run natively on multiple cores. They mentioned that they have run it on up to 64 cores to this point. The phones as you might expect will at least start as dual core. If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores. The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media. Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720. Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup. Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time. What Microsoft showed today included the fact that they didn’t just want it to be for the phone. There is cross platform NFC functionality between Windows Phone 8 and Windows 8. The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment. We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept. What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms. They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software. Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion. This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released. With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release. Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way. This allows for less important tiles or ones with less information to be made smaller. And There Is More So what other tidbits came out of the presentation? Later this summer the API for WP8 will be available. There will be developer events coming to a city near you. Another announcement of interest to developers is the ability to write applications at a native code level. This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air. Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates. Update coming for Windows Phone 7.5 customers to WP7.8. The main enhancement will be the new live tile features. The big bonus is that the update will bypass the carriers. I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post. Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

Read the article

UIView with IrrlichtScene - iOS

- by user1459024

i have a UIViewController in a Storyboard and want to draw a IrrlichtScene in this View Controller. My Code: WWSViewController.h #import <UIKit/UIKit.h> @interface WWSViewController : UIViewController { IBOutlet UILabel *errorLabel; } @end WWSViewController.mm #import "WWSViewController.h" #include "../../ressources/irrlicht/include/irrlicht.h" using namespace irr; using namespace core; using namespace scene; using namespace video; using namespace io; using namespace gui; @interface WWSViewController () @end @implementation WWSViewController -(void)awakeFromNib { errorLabel = [[UILabel alloc] init]; errorLabel.text = @""; IrrlichtDevice *device = createDevice( video::EDT_OGLES1, dimension2d<u32>(640, 480), 16, false, false, false, 0); /* Set the caption of the window to some nice text. Note that there is an 'L' in front of the string. The Irrlicht Engine uses wide character strings when displaying text. */ device->setWindowCaption(L"Hello World! - Irrlicht Engine Demo"); /* Get a pointer to the VideoDriver, the SceneManager and the graphical user interface environment, so that we do not always have to write device->getVideoDriver(), device->getSceneManager(), or device->getGUIEnvironment(). */ IVideoDriver* driver = device->getVideoDriver(); ISceneManager* smgr = device->getSceneManager(); IGUIEnvironment* guienv = device->getGUIEnvironment(); /* We add a hello world label to the window, using the GUI environment. The text is placed at the position (10,10) as top left corner and (260,22) as lower right corner. */ guienv->addStaticText(L"Hello World! This is the Irrlicht Software renderer!", rect<s32>(10,10,260,22), true); /* To show something interesting, we load a Quake 2 model and display it. We only have to get the Mesh from the Scene Manager with getMesh() and add a SceneNode to display the mesh with addAnimatedMeshSceneNode(). We check the return value of getMesh() to become aware of loading problems and other errors. Instead of writing the filename sydney.md2, it would also be possible to load a Maya object file (.obj), a complete Quake3 map (.bsp) or any other supported file format. By the way, that cool Quake 2 model called sydney was modelled by Brian Collins. */ IAnimatedMesh* mesh = smgr->getMesh("/Users/dbocksteger/Desktop/test/media/sydney.md2"); if (!mesh) { device->drop(); if (!errorLabel) { errorLabel = [[UILabel alloc] init]; } errorLabel.text = @"Konnte Mesh nicht laden."; return; } IAnimatedMeshSceneNode* node = smgr->addAnimatedMeshSceneNode( mesh ); /* To let the mesh look a little bit nicer, we change its material. We disable lighting because we do not have a dynamic light in here, and the mesh would be totally black otherwise. Then we set the frame loop, such that the predefined STAND animation is used. And last, we apply a texture to the mesh. Without it the mesh would be drawn using only a color. */ if (node) { node->setMaterialFlag(EMF_LIGHTING, false); node->setMD2Animation(scene::EMAT_STAND); node->setMaterialTexture( 0, driver->getTexture("/Users/dbocksteger/Desktop/test/media/sydney.bmp") ); } /* To look at the mesh, we place a camera into 3d space at the position (0, 30, -40). The camera looks from there to (0,5,0), which is approximately the place where our md2 model is. */ smgr->addCameraSceneNode(0, vector3df(0,30,-40), vector3df(0,5,0)); /* Ok, now we have set up the scene, lets draw everything: We run the device in a while() loop, until the device does not want to run any more. This would be when the user closes the window or presses ALT+F4 (or whatever keycode closes a window). */ while(device->run()) { /* Anything can be drawn between a beginScene() and an endScene() call. The beginScene() call clears the screen with a color and the depth buffer, if desired. Then we let the Scene Manager and the GUI Environment draw their content. With the endScene() call everything is presented on the screen. */ driver->beginScene(true, true, SColor(255,100,101,140)); smgr->drawAll(); guienv->drawAll(); driver->endScene(); } /* After we are done with the render loop, we have to delete the Irrlicht Device created before with createDevice(). In the Irrlicht Engine, you have to delete all objects you created with a method or function which starts with 'create'. The object is simply deleted by calling ->drop(). See the documentation at irr::IReferenceCounted::drop() for more information. */ device->drop(); } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } @end Sadly the result is just a black View in the Simulator. :( Hope here is anyone who can explain me how i draw the scene in a UIView. Furthermore I'm getting this Error: Could not load sprite bank because the file does not exist: #DefaultFont How can i fix it ?

Read the article

Clouds, Clouds, Clouds Everywhere, Not a Drop of Rain!

- by sxkumar

At the recently concluded Oracle OpenWorld 2012, the center of discussion was clearly Cloud. Over the five action packed days, I got to meet a large number of customers and most of them had serious interest in all things cloud. Public Cloud - particularly the Oracle Cloud - clearly got a lot of attention and interest. I think the use cases and the value proposition for public cloud is pretty straight forward. However, when it comes to private cloud, there were some interesting revelations. Well, I shouldn’t really call them revelations since they are pretty consistent with what I have heard from customers at other conferences as well as during 1:1 interactions. While the interest in enterprise private cloud remains to be very high, only a handful of enterprises have truly embarked on a journey to create what the purists would call true private cloud - with capabilities such as self-service and chargeback/show back. For a large majority, today's reality is simply consolidation and virtualization - and they are quite far off from creating an agile, self-service and transparent IT infrastructure which is what the enterprise cloud is all about. Even a handful of those who have actually implemented a close-to-real enterprise private cloud have taken an infrastructure centric approach and are seeing only limited business upside. Quite a few were frank enough to admit that chargeback and self-service isn’t something that they see an immediate need for. This is in quite contrast to the picture being painted by all those surveys out there that show a large number of enterprises having already implemented an enterprise private cloud. On the face of it, this seems quite contrary to the observations outlined above. So what exactly is the reality? Well, the reality is that there is undoubtedly a huge amount of interest among enterprises about transforming their legacy IT environment - which is often seen as too rigid, too fragmented, and ultimately too expensive - to something more agile, transparent and business-focused. At the same time however, there is a great deal of confusion among CIOs and architects about how to get there. This isn't very surprising given all the buzz and hype surrounding cloud computing. Every IT vendor claims to have the most unique solution and there isn't a single IT product out there that does not have a cloud angle to it. Add to this the chatter on the blogosphere, it will get even a sane mind spinning. Consequently, most enterprises are still struggling to fully understand the concept and value of enterprise private cloud. Even among those who have chosen to move forward relatively early, quite a few have made their decisions more based on vendor influence/preferences rather than what their businesses actually need. Clearly, there is a disconnect between the promise of the enterprise private cloud and the current adoption trends. So what is the way forward? I certainly do not claim to have all the answers. But here is a perspective that many cloud practitioners have found useful and thus worth sharing. To take a step back, the fundamental premise of the enterprise private cloud is IT transformation. It is the quest to create a more agile, transparent and efficient IT infrastructure that is driven more by business needs rather than constrained by operational and procedural inefficiencies. It is the new way of delivering and consuming IT services - where the IT organizations operate more like enablers of strategic services rather than just being the gatekeepers of IT resources. In an enterprise private cloud environment, IT organizations are expected to empower the end users via self-service access/control and provide the business stakeholders a transparent view of how the resources are being used, what’s the cost of delivering a given service, how well are the customers being served, etc. But the most important thing to note here is the enterprise private cloud is not just an IT project, rather it is a business initiative to create an IT setup that is more aligned with the needs of today's dynamic and highly competitive business environment. Surprised? You shouldn’t be. Just remember how the business users have been at the forefront of public cloud adoption within enterprises and private cloud is no exception. Such a broad-based transformation makes cloud more than a technology initiative. It requires people (organizational) and process changes as well, and these changes are as critical as is the choice of right tools and technology. In my next blog, I will share how essential it is for enterprise cloud technology to go hand-in hand with process re-engineering and organization changes to unlock true value of enterprise cloud. I am sharing a short video from my session "Managing your private Cloud" at Oracle OpenWorld 2012. More videos from this session will be posted at the recently introduced Zero to Cloud resource page. Many other experts of Oracle enterprise private cloud solution will join me on this blog "Zero to Cloud" and share best practices , deployment tips and information on how to plan, build, deploy, monitor, manage , meter and optimize the enterprise private cloud. We look forward to your feedback, suggestions and having an engaging conversion with you on this blog.

Read the article

How to reduce virtual memory by optimising my PHP code?

- by iCeR

My current code (see below) uses 147MB of virtual memory! My provider has allocated 100MB by default and the process is killed once run, causing an internal error. The code is utilising curl multi and must be able to loop with more than 150 iterations whilst still minimizing the virtual memory. The code below is only set at 150 iterations and still causes the internal server error. At 90 iterations the issue does not occur. How can I adjust my code to lower the resource use / virtual memory? Thanks! <?php function udate($format, $utimestamp = null) { if ($utimestamp === null) $utimestamp = microtime(true); $timestamp = floor($utimestamp); $milliseconds = round(($utimestamp - $timestamp) * 1000); return date(preg_replace('`(?<!\\\\)u`', $milliseconds, $format), $timestamp); } $url = 'https://www.testdomain.com/'; $curl_arr = array(); $master = curl_multi_init(); for($i=0; $i<150; $i++) { $curl_arr[$i] = curl_init(); curl_setopt($curl_arr[$i], CURLOPT_URL, $url); curl_setopt($curl_arr[$i], CURLOPT_RETURNTRANSFER, 1); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYHOST, FALSE); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYPEER, FALSE); curl_multi_add_handle($master, $curl_arr[$i]); } do { curl_multi_exec($master,$running); } while($running > 0); for($i=0; $i<150; $i++) { $results = curl_multi_getcontent ($curl_arr[$i]); $results = explode(" ", $results); echo $results[0]; echo " "; echo $results[1]; echo " "; echo udate('H:i:s:u'); echo " "; usleep(100000); } ?> Processor Information Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #2 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #3 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #4 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #5 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #6 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #7 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #8 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Memory Information Memory for crash kernel (0x0 to 0x0) notwithin permissible range Memory: 8302344k/9175040k available (2176k kernel code, 80272k reserved, 901k data, 228k init, 7466304k highmem) System Information Linux server3.server.com 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux Physical Disks SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back sd 0:1:0:0: Attached scsi disk sda sd 4:0:0:0: Attached scsi removable disk sdb sd 0:1:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: Attached scsi generic sg7 type 0 Current Memory Usage total used free shared buffers cached Mem: 8306672 7847384 459288 0 487912 6444548 -/+ buffers/cache: 914924 7391748 Swap: 4095992 496 4095496 Total: 12402664 7847880 4554784 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 898G 307G 546G 36% / /dev/sda1 99M 19M 76M 20% /boot none 4.0G 0 4.0G 0% /dev/shm /var/tmpMnt 4.0G 1.8G 2.0G 48% /tmp

Read the article

Who could ask for more with LESS CSS? (Part 1 of 3–Features)

- by ToStringTheory

It wasn’t very long ago that I first began to get into CSS precompilers such as SASS (Syntactically Awesome Stylesheets) and LESS (The Dynamic Stylesheet Language) and I had been hooked on the idea since. When I finally had a new project come up, I leapt at the opportunity to try out one of these languages. Introduction To be honest, I was hesitant at first to add either framework as I didn’t really know much more than what I had read on their homepages, and I didn’t like the idea of adding too much complexity to a project - I couldn’t guarantee I would be the only person to support it in the future. Thankfully, both of these languages just add things into CSS. You don’t HAVE to know LESS or SASS to do anything, you can still do your old school CSS, and your output will be the same. However, when you want to start doing more advanced things such as variables, mixins, and color functions, the functionality is all there for you to utilize. From what I had read, SASS has a few more features than LESS, which is why I initially tried to figure out how to incorporate it into a MVC 4 project. However, through my research, I couldn’t find a way to accomplish this without including some bit of the Ruby on Rails framework on the computer running it, and I hated the fact that I had to do that. Besides SASS, there is little chance of me getting into the RoR framework, at least in the next couple years. So in the end, I settled with using LESS. Features So, what can LESS (or SASS) do for you? There are several reasons I have come to love it in the past few weeks. 1 – Constants Using LESS, you can finally declare a constant and use its value across an entire CSS file. The case that most people would be familiar with is colors. Wanting to declare one or two color variables that comprise the theme of the site, and not have to retype out their specific hex code each time, but rather a variable name. What’s great about this is that if you end up having to change it, you only have to change it in one place. An important thing to note is that you aren’t limited to creating constants just for colors, but for strings and measurements as well. 2 – Inheritance This is a cool feature in my mind for simplicity and organization. Both LESS and SASS allow you to place selectors within other selectors, and when it is compiled, the languages will break the rules out as necessary and keep the inheritance chain you created in the selectors. Example LESS Code: #header { h1 { font-size: 26px; font-weight: bold; } p { font-size: 12px; a { text-decoration: none; &:hover { border-width: 1px } } } } Example Compiled CSS: #header h1 { font-size: 26px; font-weight: bold; } #header p { font-size: 12px; } #header p a { text-decoration: none; } #header p a:hover { border-width: 1px; } 3 - Mixins Mixins are where languages like this really shine. The ability to mixin other definitions setup a parametric mixin. There is really a lot of content in this area, so I would suggest looking at http://lesscss.org for more information. One of the things I would suggest if you do begin to use LESS is to also grab the mixins.less file from the Twitter Bootstrap project. This file already has a bunch of predefined mixins for things like border-radius with all of the browser specific prefixes. This alone is of great use! 4 – Color Functions This is the last thing I wanted to point out as my final post in this series will be utilizing these functions in a more drawn out manner. Both LESS and SASS provide functions for getting information from a color (R,G,B,H,S,L). Using these, it is easy to define a primary color, and then darken or lighten it a little for your needs. Example: Example LESS Code: @base-color: #111; @red: #842210; #footer { color: (@base-color + #003300); border-left: 2px; border-right: 2px; border-color: desaturate(@red, 10%); } Example Compiled CSS: #footer { color: #114411; border-left: 2px; border-right: 2px; border-color: #7d2717; } I have found that these can be very useful and powerful when constructing a site theme. Conclusion I came across LESS and SASS when looking for the best way to implement some type of CSS variables for colors, because I hated having to do a Find and Replace in all of the files using the colors, and in some instances, you couldn’t just find/replace because of the color choices interfering with other colors (color to replace of #000, yet come colors existed like #0002bc). So in many cases I would end up having to do a Find and manually check each one. In my next post, I am going to cover how I’ve come to set up these items and the structure for the items in the project, as well as the conventions that I have come to start using. In the final post in the series, I will cover a neat little side project I built in LESS dealing with colors!

Read the article

12.04 upgrade broke grub? (not wubi related)

- by kaare

I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

Read the article

Dual booting on separate hard drives

- by tornadorider

I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

Read the article

Partitioned Repository for WebCenter Content using Oracle Database 11g

- by Adao Junior

One of the biggest challenges for content management solutions is related to the storage management due the high volumes of the unstoppable growing of information. Even if you have storage appliances and a lot of terabytes, thinks like backup, compression, deduplication, storage relocation, encryption, availability could be a nightmare. One standard option that you have with the Oracle WebCenter Content is to store data to the database. And the Oracle Database allows you leverage features like compression, deduplication, encryption and seamless backup. But with a huge volume, the challenge is passed to the DBA to keep the WebCenter Content Database up and running. One solution is the use of DB partitions for your content repository, but what are the implications of this? Can I fit this with my business requirements? Well, yes. It’s up to you how you will manage that, you just need a good plan. During you “storage brainstorm plan” take in your mind what you need, such as storage petabytes of documents? You need everything on-line? There’s a way to logically separate the “good content” from the “legacy content”? The first thing that comes to my mind is to use the creation date of the document, but you need to remember that this document could receive a lot of revisions and maybe you can consider the revision creation date. Your plan can have also complex rules like per Document Type or per a custom metadata like department or an hybrid per date, per DocType and an specific virtual folder. Extrapolation the use, you can have your repository distributed in different servers, different disks, different disk types (Such as ssds, sas, sata, tape,…), separated accordingly your business requirements, separating the “hot” content from the legacy and easily matching your compliance requirements. If you think to use by revision, the simple way is to consider the dId, that is the sequential unique id for every content created using the WebCenter Content or the dLastModified that is the date field of the FileStorage table that contains the date of inclusion of the content to the DB Table using SecureFiles. Using the scenario of partitioned repository using an hierarchical separation by date, we will transform the FileStorage table in an partitioned table using “Partition by Range” of the dLastModified column (You can use the dId or a join with other tables for other metadata such as dDocType, Security, etc…). The test scenario bellow covers: Previous existent data on the JDBC Storage to be migrated to the new partitioned JDBC Storage Partition by Date Automatically generation of new partitions based on a pre-defined interval (Available only with Oracle Database 11g+) Deduplication and Compression for legacy data Oracle WebCenter Content 11g PS5 (Could present some customizations that do not affect the test scenario) For the test case you need some data stored using JDBC Storage to be the “legacy” data. If you do not have done before, just create an Storage rule pointed to the JDBC Storage: Enable the metadata StorageRule in the UI and upload some documents using this rule. For this test case you can run using the schema owner or an dba user. We will use the schema owner TESTS_OCS. I can’t forgot to tell that this is just a test and you should do a proper backup of your environment. When you use the schema owner, you need some privileges, using the dba user grant the privileges needed: REM Grant privileges required for online redefinition. GRANT EXECUTE ON DBMS_REDEFINITION TO TESTS_OCS; GRANT ALTER ANY TABLE TO TESTS_OCS; GRANT DROP ANY TABLE TO TESTS_OCS; GRANT LOCK ANY TABLE TO TESTS_OCS; GRANT CREATE ANY TABLE TO TESTS_OCS; GRANT SELECT ANY TABLE TO TESTS_OCS; REM Privileges required to perform cloning of dependent objects. GRANT CREATE ANY TRIGGER TO TESTS_OCS; GRANT CREATE ANY INDEX TO TESTS_OCS; In our test scenario we will separate the content as Legacy, Day1, Day2, Day3 and Future. This last one will partitioned automatically using 3 tablespaces in a round robin mode. In a real scenario the partition rule could be per month, per year or any rule that you choose. Table spaces for the test scenario: CREATE TABLESPACE TESTS_OCS_PART_LEGACY DATAFILE 'tests_ocs_part_legacy.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY1 DATAFILE 'tests_ocs_part_day1.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY2 DATAFILE 'tests_ocs_part_day2.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_DAY3 DATAFILE 'tests_ocs_part_day3.dat' SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_A 'tests_ocs_part_round_robin_a.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_B 'tests_ocs_part_round_robin_b.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; CREATE TABLESPACE TESTS_OCS_PART_ROUND_ROBIN_C 'tests_ocs_part_round_robin_c.dat' DATAFILE SIZE 500K AUTOEXTEND ON NEXT 500K MAXSIZE UNLIMITED; Before start, gather optimizer statistics on the actual FileStorage table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage', cascade => TRUE); Now check if is possible execute the redefinition process: EXEC DBMS_REDEFINITION.CAN_REDEF_TABLE('TESTS_OCS', 'FileStorage',DBMS_REDEFINITION.CONS_USE_PK); If no errors messages, you are good to go. Create a Partitioned Interim FileStorage table. You need to create a new table with the partition information to act as an interim table: CREATE TABLE FILESTORAGE_Part ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY RANGE (DLASTMODIFIED) INTERVAL (NUMTODSINTERVAL(1,'DAY')) STORE IN (TESTS_OCS_PART_ROUND_ROBIN_A, TESTS_OCS_PART_ROUND_ROBIN_B, TESTS_OCS_PART_ROUND_ROBIN_C) ( PARTITION FILESTORAGE_PART_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_LEGACY LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_LEGACY RETENTION NONE DEDUPLICATE COMPRESS HIGH ), PARTITION FILESTORAGE_PART_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY1 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY1 RETENTION AUTO KEEP_DUPLICATES COMPRESS ), PARTITION FILESTORAGE_PART_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY2 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY2 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ), PARTITION FILESTORAGE_PART_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) TABLESPACE TESTS_OCS_PART_DAY3 LOB (BFILEDATA) STORE AS SECUREFILE ( TABLESPACE TESTS_OCS_PART_DAY3 RETENTION AUTO KEEP_DUPLICATES NOCOMPRESS ) ); After the creation you should see your partitions defined. Note that only the fixed range partitions have been created, none of the interval partition have been created. Start the redefinition process: BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,col_mapping => NULL ,options_flag => DBMS_REDEFINITION.CONS_USE_PK ); END; This operation can take some time to complete, depending how many contents that you have and on the size of the table. Using the DBA user you can check the progress with this command: SELECT * FROM v$sesstat WHERE sid = 1; Copy dependent objects: DECLARE redefinition_errors PLS_INTEGER := 0; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'TESTS_OCS' ,orig_table => 'FileStorage' ,int_table => 'FileStorage_PART' ,copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS ,copy_triggers => TRUE ,copy_constraints => TRUE ,copy_privileges => TRUE ,ignore_errors => TRUE ,num_errors => redefinition_errors ,copy_statistics => FALSE ,copy_mvlog => FALSE ); IF (redefinition_errors > 0) THEN DBMS_OUTPUT.PUT_LINE('>>> FileStorage to FileStorage_PART temp copy Errors: ' || TO_CHAR(redefinition_errors)); END IF; END; With the DBA user, verify that there's no errors: SELECT object_name, base_table_name, ddl_txt FROM DBA_REDEFINITION_ERRORS; *Note that will show 2 lines related to the constrains, this is expected. Synchronize the interim table FileStorage_PART: BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; Gather statistics on the new table: EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'FileStorage_PART', cascade => TRUE); Complete the redefinition: BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'TESTS_OCS', orig_table => 'FileStorage', int_table => 'FileStorage_PART'); END; During the execution the FileStorage table is locked in exclusive mode until finish the operation. After the last command the FileStorage table is partitioned. If you have contents out of the range partition, you should see the new partitions created automatically, not generating an error if you “forgot” to create all the future ranges. You will see something like: You now can drop the FileStorage_PART table: border-bottom-width: 1px; border-bottom-style: solid; text-align: left; border-left-color: silver; border-left-width: 1px; border-left-style: solid; padding-bottom: 4px; line-height: 12pt; background-color: #f4f4f4; margin-top: 20px; margin-right: 0px; margin-bottom: 10px; margin-left: 0px; padding-left: 4px; width: 97.5%; padding-right: 4px; font-family: 'Courier New', Courier, monospace; direction: ltr; max-height: 200px; font-size: 8pt; overflow-x: auto; overflow-y: auto; border-top-color: silver; border-top-width: 1px; border-top-style: solid; cursor: text; border-right-color: silver; border-right-width: 1px; border-right-style: solid; padding-top: 4px; " id="codeSnippetWrapper"> DROP TABLE FileStorage_PART PURGE; To check the FileStorage table is valid and is partitioned, use the command: SELECT num_rows,partitioned FROM user_tables WHERE table_name = 'FILESTORAGE'; You can list the contents of the FileStorage table in a specific partition, per example: SELECT * FROM FileStorage PARTITION (FILESTORAGE_PART_LEGACY) Some useful commands that you can use to check the partitions, note that you need to run using a DBA user: SELECT * FROM DBA_TAB_PARTITIONS WHERE table_name = 'FILESTORAGE'; SELECT * FROM DBA_TABLESPACES WHERE tablespace_name like 'TESTS_OCS%'; After the redefinition process complete you have a new FileStorage table storing all content that has the Storage rule pointed to the JDBC Storage and partitioned using the rule set during the creation of the temporary interim FileStorage_PART table. At this point you can test the WebCenter Content downloading the documents (Original and Renditions). Note that the content could be already in the cache area, take a look in the weblayout directory to see if a file with the same id is there, then click on the web rendition of your test file and see if have created the file and you can open, this means that is all working. The redefinition process can be repeated many times, this allow you test what the better layout, over and over again. Now some interesting maintenance actions related to the partitions: Make an tablespace read only. No issues viewing, the WebCenter Content do not alter the revisions When try to delete an content that is part of an read only tablespace, an error will occurs and the document will not be deleted The only way to prevent errors today is creating an custom component that checks the partitions and if you have an document in an “Read Only” repository, execute the deletion process of the metadata and mark the document to be deleted on the next db maintenance, like a new redefinition. Take an tablespace off-line for archiving purposes or any other reason. When you try open an document that is included in this tablespace will receive an error that was unable to retrieve the content, but the others online tablespaces are not affected. Same behavior when deleting documents. Again, an custom component is the solution. If you have an document “out of range”, the component can show an message that the repository for that document is offline. This can be extended to a option to the user to request to put online again. Moving some legacy content to an offline repository (table) using the Exchange option to move the content from one partition to a empty nonpartitioned table like FileStorage_LEGACY. Note that this option will remove the registers from the FileStorage and will not be able to open the stored content. You always need to keep in mind the indexes and constrains. An redefinition separating the original content (vault) from the renditions and separate by date ate the same time. This could be an option for DAM environments that want to have an special place for the renditions and put the original files in a storage with less performance. The process will be the same, you just need to change the script of the interim table to use composite partitioning. Will be something like: CREATE TABLE FILESTORAGE_RenditionPart ( DID NUMBER(*,0) NOT NULL ENABLE, DRENDITIONID VARCHAR2(30 CHAR) NOT NULL ENABLE, DLASTMODIFIED TIMESTAMP (6), DFILESIZE NUMBER(*,0), DISDELETED VARCHAR2(1 CHAR), BFILEDATA BLOB ) LOB (BFILEDATA) STORE AS SECUREFILE ( ENABLE STORAGE IN ROW NOCACHE LOGGING KEEP_DUPLICATES NOCOMPRESS ) PARTITION BY LIST (DRENDITIONID) SUBPARTITION BY RANGE (DLASTMODIFIED) ( PARTITION Vault VALUES ('primaryFile') ( SUBPARTITION FILESTORAGE_VAULT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_VAULT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION WebLayout VALUES ('webViewableFile') ( SUBPARTITION FILESTORAGE_WEBLAYOUT_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_WEBLAYOUT_FUTURE VALUES LESS THAN (MAXVALUE) ) ,PARTITION Special VALUES ('Special') ( SUBPARTITION FILESTORAGE_SPECIAL_LEGACY VALUES LESS THAN (TO_DATE('05-APR-2012 12.00.00 AM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY1 VALUES LESS THAN (TO_DATE('06-APR-2012 07.25.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY2 VALUES LESS THAN (TO_DATE('06-APR-2012 07.55.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_DAY3 VALUES LESS THAN (TO_DATE('06-APR-2012 07.58.00 PM', 'DD-MON-YYYY HH.MI.SS AM')) LOB (BFILEDATA) STORE AS SECUREFILE , SUBPARTITION FILESTORAGE_SPECIAL_FUTURE VALUES LESS THAN (MAXVALUE) ) )ENABLE ROW MOVEMENT; The next post related to partitioned repository will come with an sample component to handle the possible exceptions when you need to take off line an tablespace/partition or move to another place. Also, we can include some integration to the Retention Management and Records Management. Another subject related to partitioning is the ability to create an FileStore Provider pointed to a different database, raising the level of the distributed storage vs. performance. Let us know if this is important to you or you have an use case not listed, leave a comment. Cross-posted on the blog.ContentrA.com

Read the article

Grub 'Read Error' - Only Loads with LiveCD

- by Ryan Sharp

Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

Read the article

Windows Azure: Announcing release of Windows Azure SDK 2.2 (with lots of goodies)

- by ScottGu

Earlier today I blogged about a big update we made today to Windows Azure, and some of the great new features it provides. Today I’m also excited to also announce the release of the Windows Azure SDK 2.2. Today’s SDK release adds even more great features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter The below post has more details on what’s available in today’s Windows Azure SDK 2.2 release. Also head over to Channel 9 to see the new episode of the Visual Studio Toolbox show that will be available shortly, and which highlights these features in a video demonstration. Visual Studio 2013 Support Version 2.2 of the Window Azure SDK is the first official version of the SDK to support the final RTM release of Visual Studio 2013. If you installed the 2.1 SDK with the Preview of Visual Studio 2013 we recommend that you upgrade your projects to SDK 2.2. SDK 2.2 also works side by side with the SDK 2.0 and SDK 2.1 releases on Visual Studio 2012: Integrated Windows Azure Sign In within Visual Studio Integrated Windows Azure Sign-In support within Visual Studio is one of the big improvements added with this Windows Azure SDK release. Integrated sign-in support enables developers to develop/test/manage Windows Azure resources within Visual Studio without having to download or use management certificates. You can now just right-click on the “Windows Azure” icon within the Server Explorer inside Visual Studio and choose the “Connect to Windows Azure” context menu option to connect to Windows Azure: Doing this will prompt you to enter the email address of the account you wish to sign-in with: You can use either a Microsoft Account (e.g. Windows Live ID) or an Organizational account (e.g. Active Directory) as the email. The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio Server Explorer (and you can start using them): With this new integrated sign in experience you are now able to publish web apps, deploy VMs and cloud services, use Windows Azure diagnostics, and fully interact with your Windows Azure services within Visual Studio without the need for a management certificate. All of the authentication is handled using the Windows Azure Active Directory associated with your Windows Azure account (details on this can be found in my earlier blog post). Integrating authentication this way end-to-end across the Service Management APIs + Dev Tools + Management Portal + PowerShell automation scripts enables a much more secure and flexible security model within Windows Azure, and makes it much more convenient to securely manage multiple developers + administrators working on a project. It also allows organizations and enterprises to use the same authentication model that they use for their developers on-premises in the cloud. It also ensures that employees who leave an organization immediately lose access to their company’s cloud based resources once their Active Directory account is suspended. Filtering/Subscription Management Once you login within Visual Studio, you can filter which Windows Azure subscriptions/regions are visible within the Server Explorer by right-clicking the “Filter Services” context menu within the Server Explorer. You can also use the “Manage Subscriptions” context menu to mange your Windows Azure Subscriptions: Bringing up the “Manage Subscriptions” dialog allows you to see which accounts you are currently using, as well as which subscriptions are within them: The “Certificates” tab allows you to continue to import and use management certificates to manage Windows Azure resources as well. We have not removed any functionality with today’s update – all of the existing scenarios that previously supported management certificates within Visual Studio continue to work just fine. The new integrated sign-in support provided with today’s release is purely additive. Note: the SQL Database node and the Mobile Service node in Server Explorer do not support integrated sign-in at this time. Therefore, you will only see databases and mobile services under those nodes if you have a management certificate to authorize access to them. We will enable them with integrated sign-in in a future update. Remote Debugging Cloud Resources within Visual Studio Today’s Windows Azure SDK 2.2 release adds support for remote debugging many types of Windows Azure resources. With live, remote debugging support from within Visual Studio, you are now able to have more visibility than ever before into how your code is operating live in Windows Azure. Let’s walkthrough how to enable remote debugging for a Cloud Service: Remote Debugging of Cloud Services To enable remote debugging for your cloud service, select Debug as the Build Configuration on the Common Settings tab of your Cloud Service’s publish dialog wizard: Then click the Advanced Settings tab and check the Enable Remote Debugging for all roles checkbox: Once your cloud service is published and running live in the cloud, simply set a breakpoint in your local source code: Then use Visual Studio’s Server Explorer to select the Cloud Service instance deployed in the cloud, and then use the Attach Debugger context menu on the role or to a specific VM instance of it: Once the debugger attaches to the Cloud Service, and a breakpoint is hit, you’ll be able to use the rich debugging capabilities of Visual Studio to debug the cloud instance remotely, in real-time, and see exactly how your app is running in the cloud. Today’s remote debugging support is super powerful, and makes it much easier to develop and test applications for the cloud. Support for remote debugging Cloud Services is available as of today, and we’ll also enable support for remote debugging Web Sites shortly. Firewall Management Support with SQL Databases By default we enable a security firewall around SQL Databases hosted within Windows Azure. This ensures that only your application (or IP addresses you approve) can connect to them and helps make your infrastructure secure by default. This is great for protection at runtime, but can sometimes be a pain at development time (since by default you can’t connect/manage the database remotely within Visual Studio if the security firewall blocks your instance of VS from connecting to it). One of the cool features we’ve added with today’s release is support that makes it easy to enable and configure the security firewall directly within Visual Studio. Now with the SDK 2.2 release, when you try and connect to a SQL Database using the Visual Studio Server Explorer, and a firewall rule prevents access to the database from your machine, you will be prompted to add a firewall rule to enable access from your local IP address: You can simply click Add Firewall Rule and a new rule will be automatically added for you. In some cases, the logic to detect your local IP may not be sufficient (for example: you are behind a corporate firewall that uses a range of IP addresses) and you may need to set up a firewall rule for a range of IP addresses in order to gain access. The new Add Firewall Rule dialog also makes this easy to do. Once connected you’ll be able to manage your SQL Database directly within the Visual Studio Server Explorer: This makes it much easier to work with databases in the cloud. Visual Studio 2013 RTM Virtual Machine Images Available for MSDN Subscribers Last week we released the General Availability Release of Visual Studio 2013 to the web. This is an awesome release with a ton of new features. With today’s Windows Azure update we now have a set of pre-configured VM images of VS 2013 available within the Windows Azure Management Portal for use by MSDN customers. This enables you to create a VM in the cloud with VS 2013 pre-installed on it in with only a few clicks: Windows Azure now provides the fastest and easiest way to get started doing development with Visual Studio 2013. Windows Azure Management Libraries for .NET (Preview) Having the ability to automate the creation, deployment, and tear down of resources is a key requirement for applications running in the cloud. It also helps immensely when running dev/test scenarios and coded UI tests against pre-production environments. Today we are releasing a preview of a new set of Windows Azure Management Libraries for .NET. These new libraries make it easy to automate tasks using any .NET language (e.g. C#, VB, F#, etc). Previously this automation capability was only available through the Windows Azure PowerShell Cmdlets or to developers who were willing to write their own wrappers for the Windows Azure Service Management REST API. Modern .NET Developer Experience We’ve worked to design easy-to-understand .NET APIs that still map well to the underlying REST endpoints, making sure to use and expose the modern .NET functionality that developers expect today: Portable Class Library (PCL) support targeting applications built for any .NET Platform (no platform restriction) Shipped as a set of focused NuGet packages with minimal dependencies to simplify versioning Support async/await task based asynchrony (with easy sync overloads) Shared infrastructure for common error handling, tracing, configuration, HTTP pipeline manipulation, etc. Factored for easy testability and mocking Built on top of popular libraries like HttpClient and Json.NET Below is a list of a few of the management client classes that are shipping with today’s initial preview release: .NET Class Name Supports Operations for these Assets (and potentially more) ManagementClient Locations Credentials Subscriptions Certificates ComputeManagementClient Hosted Services Deployments Virtual Machines Virtual Machine Images & Disks StorageManagementClient Storage Accounts WebSiteManagementClient Web Sites Web Site Publish Profiles Usage Metrics Repositories VirtualNetworkManagementClient Networks Gateways Automating Creating a Virtual Machine using .NET Let’s walkthrough an example of how we can use the new Windows Azure Management Libraries for .NET to fully automate creating a Virtual Machine. I’m deliberately showing a scenario with a lot of custom options configured – including VHD image gallery enumeration, attaching data drives, network endpoints + firewall rules setup - to show off the full power and richness of what the new library provides. We’ll begin with some code that demonstrates how to enumerate through the built-in Windows images within the standard Windows Azure VM Gallery. We’ll search for the first VM image that has the word “Windows” in it and use that as our base image to build the VM from. We’ll then create a cloud service container in the West US region to host it within: We can then customize some options on it such as setting up a computer name, admin username/password, and hostname. We’ll also open up a remote desktop (RDP) endpoint through its security firewall: We’ll then specify the VHD host and data drives that we want to mount on the Virtual Machine, and specify the size of the VM we want to run it in: Once everything has been set up the call to create the virtual machine is executed asynchronously In a few minutes we’ll then have a completely deployed VM running on Windows Azure with all of the settings (hard drives, VM size, machine name, username/password, network endpoints + firewall settings) fully configured and ready for us to use: Preview Availability via NuGet The Windows Azure Management Libraries for .NET are now available via NuGet. Because they are still in preview form, you’ll need to add the –IncludePrerelease switch when you go to retrieve the packages. The Package Manager Console screen shot below demonstrates how to get the entire set of libraries to manage your Windows Azure assets: You can also install them within your .NET projects by right clicking on the VS Solution Explorer and using the Manage NuGet Packages context menu command. Make sure to select the “Include Prerelease” drop-down for them to show up, and then you can install the specific management libraries you need for your particular scenarios: Open Source License The new Windows Azure Management Libraries for .NET make it super easy to automate management operations within Windows Azure – whether they are for Virtual Machines, Cloud Services, Storage Accounts, Web Sites, and more. Like the rest of the Windows Azure SDK, we are releasing the source code under an open source (Apache 2) license and it is hosted at https://github.com/WindowsAzure/azure-sdk-for-net/tree/master/libraries if you wish to contribute. PowerShell Enhancements and our New Script Center Today, we are also shipping Windows Azure PowerShell 0.7.0 (which is a separate download). You can find the full change log here. Here are some of the improvements provided with it: Windows Azure Active Directory authentication support Script Center providing many sample scripts to automate common tasks on Windows Azure New cmdlets for Media Services and SQL Database Script Center Windows Azure enables you to script and automate a lot of tasks using PowerShell. People often ask for more pre-built samples of common scenarios so that they can use them to learn and tweak/customize. With this in mind, we are excited to introduce a new Script Center that we are launching for Windows Azure. You can learn about how to scripting with Windows Azure with a get started article. You can then find many sample scripts across different solutions, including infrastructure, data management, web, and more: All of the sample scripts are hosted on TechNet with links from the Windows Azure Script Center. Each script is complete with good code comments, detailed descriptions, and examples of usage. Summary Visual Studio 2013 and the Windows Azure SDK 2.2 make it easier than ever to get started developing rich cloud applications. Along with the Windows Azure Developer Center’s growing set of .NET developer resources to guide your development efforts, today’s Windows Azure SDK 2.2 release should make your development experience more enjoyable and efficient. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Search Results

Search found 8238 results on 330 pages for 'dynamic disks'.

Page 305/330 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312 | Next Page >

- by mehfuzh

- by DigiMortal

- by Frank Nimphius

- by user3002473

- by wcoekaer

- by ScottGu

- by Leonid Ganeline

- by Renso

- by Divya Malik

- by Anand Akela

- by David Swanger

- by Renso

- by Richard Bingham

- by felipedrl

- by Arda Eralp

- by Tim Murphy

- by user1459024

- by sxkumar

- by iCeR

- by ToStringTheory

- by kaare

- by tornadorider

- by Adao Junior

- by Ryan Sharp

- by ScottGu

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312 | Next Page >