Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 307/409 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• Live-Ubuntu 12.04 ran fine, now stopped booting!

  - by user89743

  I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

  Read the article

• How do I set image position in conky

  - by realitygenerator

  I copied and modified an existing .conkyrc file from the ubuntu forum and I'm trying to place the LinuxMint logo in a specific position Below are my conkyrc file and the screenshot # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type desktop own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont URW Gothic:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right. alignment top_middle # Gap between borders of screen and text gap_x 10 gap_y 10 #Display temp in fahrenheit temperature_unit fahrenheit #Choose which screen on which to display # stuff after 'TEXT' will be formatted on screen TEXT $color ${color green}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine LinuxMint 11 "Katya" (Oneric) ${image ~/Conky/Logo_Linux_Mint.png -s 80x60 -f 86400} ${color green}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${hwmon temp 1} $cpubar ${cpugraph 000000 ffffff} NAME PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4} ${color green}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Root: ${fs_free_perc /}% ${fs_bar 6 /}$color hda1: ${fs_free_perc /media/sda1}% ${fs_bar 6 /media/sda1}$color ${color green}NETWORK (${addr eth1}) ${hr 2}$color Down: $color${downspeed eth1} k/s ${alignr}Up: ${upspeed eth1} k/s ${downspeedgraph eth1 25,140 000000 ff0000} ${alignr}${upspeedgraph eth1 25,140 000000 00ff00}$color Total: ${totaldown eth1} ${alignr}Total: ${totalup eth1} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color green}LOGGING ${hr 2}$color ${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w50} ${color green}FORTUNE ${hr 2}$color ${execi 120 fortune -s | fold -w50} I want to put the mint logo right after the word (oneric). Any help would be greatly appreciated.

  Read the article

• How to run software, that is not offered though package managers, that requires ia32-libs

  - by Onno

  I'm trying to install the Arma 2 OA dedicated server on a Virtualbox VM so I can test my own missions in a sandbox environment in a way that lets me offload them to another computer in my network. (The other computer is running the VM, but it's a windows machine, and I didn't want to hassle with its installation) It needs at least 2, and preferably 4GB of ram, so I thought I would install the AMD64 version of ubuntu 13.10 to get this going. 'How do you run a 32-bit program on a 64-bit version of Ubuntu?' already explained how to install 32bit software though apt-get and/or dpkg, but that doesn't apply in this case. The server is offered as a compressed download on the site of BI Studio, the developer of the Arma games. Its installation instructions are obviously slightly out of date with the current state of the art. (probably because the state of the art has been updated quite recently :) ) It states that I have to install ia32-libs, which has now apparently been deprecated. Now I have to find out how to get the right packages installed to make sure that it will run. My experience level is like novice-intermediate when it comes to these issues. I've installed a lot of packages though apt-get; I've solved dependency issues in the past; I haven't installed much software without using package managers. I can handle myself with basic administrative work like editing conf files and such. I have just gone ahead and tried to install it without installing ia32-libs through apt-get but to install gcc to get the libs after all. My reasoning being that gcc will include the files for backward compatibility coding and on linux all libs are (as far as I can tell) installed at a system level in /libs . So far it seems to start up. (I can connect with the game server trough my in-game network browser, so it's communicating) I'm not sure if there's any dependency checking going on when running the game server program, so I'm left with a couple of questions: Does 13.10 catch any calls to ia32libs libraries and translate the calls to the right code on amd64? If it runs, does that mean that all required libraries have been loaded correctly, or is there a change of it crashing later on when a library that was needed is missing after all? Is it necessary to do a workaround such as installing gcc? How do I find out what libraries I might need to run this software? (or any other piece of 32-bit software that isn't offered through a package manager)

  Read the article

• Setting up Ubuntu on my mother's computer

  - by idealmachine

  Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

  Read the article

• Paranoid management, contractor checking work [closed]

  - by user833345

  Just wanted to get some opinions and experiences on an issue I'm having at work. First, a little background. I've been working at a company for some time (past any probation periods) and rewriting a horrendous system. No tests, incomplete and broken functionality everywhere, enough copypasta to feed a small village, redundant code, more unused SQL tables than used ones and terrible performance. I've never seen such bad code, pretty much all of it is worthy of being posted on TheDailyWTF. The company has been operating for a number of years and have had a string of bad developers working on this system. I made a call on rewriting instead of refactoring since I judged it to be less work overall and decided that the result will address the requirements more appropriately, since the central requirement is to have a future-proof system for the next decade with plenty of room to scale up. Refactoring would have entailed untangling a huge ball of yarn and at the same time integrating it with a proper foundation or building a foundation from scratch. I've introduced the latest spiffy framework, unit & functional testing, CI, a bug tracker and agile workflow to the environment. I've fixed most of the performance issues of the old system (there were no indexes on any of the tables, for example). I've created an automated deployment process for the old system. The CTO has been maintaining the old system while I have been building the new one and he has been advising management that everything is being done as per best practices. However, management is hiring a contractor to come in and verify my work. In my experience, this is unprecedented. I can understand their reasoning to an extent, since they've had bad luck in the past, but can't help but feel somewhat offended at the fact that they distrust two senior developers who have been working with them for some time enough that a third party is being brought in. And it's not just me who is under watch - people's emails are constantly checked, someone had a remote desktop application installed on their computer of which I was asked to check the usage logs to try to determine if they were stealing sensitive data and there are CCTV cameras in one of the rooms. It's the first time I've decided to disable my Skype history at work. Am I right to feel indignant here? Has anyone else ever encountered such a situation? If so, how did it work out in the end? Was it worth sticking around? Should I just find another job?

  Read the article

• Link instead of Attaching

  - by Daniel Moth

  With email storage not being an issue in many companies (I think I currently have 25GB of storage on my email account, I don’t even think about storage), this encourages bad behaviors such as liberally attaching office documents to emails instead of sharing a link to the document in SharePoint or SkyDrive or some file share etc. Attaching a file admittedly has its usage scenarios too, but it should not be the default. I thought I'd list the reasons why sharing a link can be better than attaching files directly. In no particular order: Better Review. It allows multiple recipients to review the file and their comments are aggregated into a single document. The alternative is everyone having to detach the document, add their comments, then send back to you, and then you have to collate. Wirth the alternative, you also potentially miss out on recipients reading comments from other recipients. Always up to date. The attachment becomes a fork instead of an always up to date document. For example, you send the email on Thursday, I only open it on Tuesday: between those days you could have made updates that now I am missing because you decided to share a link instead of an attachment. Better bookmarking. When I need to find that document you shared, you are forcing me to search through my email (I may not even be running outlook), instead of opening the link which I have bookmarked in my browser or my collection of links in my OneNote or from the recent/pinned links of the office app on my task bar, etc. Can control access. If someone accidentally or naively forwards your link to someone outside your group/org who you’d prefer not to have access to it, the location of the document can be protected with specific access control. Can add more recipients. If someone adds people to the email thread in outlook, your attachment doesn't get re-attached - instead, the person added is left without the attachment unless someone remembers to re-attach it. If it was a link, they are immediately caught up without further actions. Enable Discovery. If you put it on a share, I may be able to discover other cool stuff that lives alongside that document. Save on storage. So this doesn't apply to me given my opening statement, but if in your company you do have such limitations, attaching files eats up storage on all recipients accounts and will also get "lost" when those people archive email (and lose completely at some point if they follow the company retention policy). Like I said, attachments do have their place, but they should be an explicit choice for explicit reasons rather than the default. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Partner BI Applications 4-Day Hands-on Training Workshop

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} 12th - 15th February 2012, Oracle Reading (UK) - REGISTER NOW This training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics: Overview of Oracle Business Intelligence Applications Oracle BI Applications Fundamentals and Features Configuring BI Applications for Oracle E-Business Suite Understanding BI Applications Architecture Fundamentals of BI Applications Security Prerequisites - This training is only for OPN member Partners. Good understanding of basic data warehousing concepts Hands on experience in Oracle Business Intelligence Enterprise Edition Hands on experience in Informatica Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables Some understanding of  Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM)  Please note that attendees are required to bring a laptop. Laptop 4GB RAM-Recognized by Windows 64 bits 80GB free space in Hard drive or External Device CPU Core 2 Duo or Higher Operating System Requirements Windows 7, Windows XP, Windows 2003 NOT ALLOWED with Windows Vista An Administrator User

  Read the article

• Profiling Startup Of VS2012 &ndash; Ants Profiler

  - by Alois Kraus

  I just downloaded ANTS Profiler 7.4 to check how fast it is and how deep I can analyze the startup of Visual Studio 2012. The Pro version which is useful does cost 445€ which is ok. To measure a complex system I decided to simply profile VS2012 (Update 1) on my older Intel 6600 2,4GHz with 3 GB RAM and a 32 bit Windows 7. Ants Profiler is really easy to use. So lets try it out. The Ants Profiler does want to start the profiled application by its own which seems to be rather common. I did choose Method Level timing of all managed methods. In the configuration menu I did want to get all call stacks to get full details. Once this is configured you are ready to go.   After that you can select the Method Grid to view Wall Clock Time in ms. I hate percentages which are on by default because I do want to look where absolute time is spent and not something else.   From the Method Grid I can drill down to see where time is spent in a nice and I can look at the decompiled methods where the time is spent. This does really look nice. But did you see the size of the scroll bar in the method grid? Although I wanted all call stacks I do get only about 4 pages of methods to drill down. From the scroll bar count I would guess that the profiler does show me about 150 methods for the complete VS startup. This is nonsense. I will never find a bottleneck in VS when I am presented only a fraction of the methods that were actually executed. I have also tried in the configuration window to also profile the extremely trivial functions but there was no noticeable difference. It seems that the Ants Profiler does filter away way too many details to be useful for bigger systems. If you want to optimize a CPU bound operation inside NUnit then Ants Profiler is with its line level timings a very nice tool to work with. But for bigger stuff it is certainly not usable. I also do not like that I must start the profiled application from the profiler UI. This makes it hard to profile processes which are started by some other process. Next: JetBrains dotTrace

  Read the article

• ClearTrace Performance on 170GB of Trace Files

  - by Bill Graziano

  I’ve always worked to make ClearTrace perform well.  That’s probably because I spend so much time watching it work.  I’m often going through two or three gigabytes of trace files but I rarely get the chance to run it on a really large set of files. One of my clients wanted to run a full trace for a week and then analyze the results.  At the end of that week we had 847 200MB trace files for a total of nearly 170GB. I regularly use 200MB trace files when I monitor production systems.  I usually get around 300,000 statements in a file that size if it’s mostly stored procedures.  So those 847 trace files contained roughly 250 million statements.  (That’s 730 bytes per statement if you’re keeping track.  Newer trace files have some compression in them but I’m not exactly sure what they’re doing.)  On a system running 1,000 statements per second I get a new file every five minutes or so. It took 27 hours to process these files on an older development box.  That works out to 1.77MB/second.  That means ClearTrace processed about 2,654 statements per second. You can query the data while you’re loading it but I’ve found it works better to use a second instance of ClearTrace to do this.  I’m not sure why yet but I think there’s still some dependency between the two processes. ClearTrace is almost always CPU bound.  It’s really just a huge, ugly collection of regular expressions.  It only writes a summary to its database at the end of each trace file so that usually isn’t a bottleneck.  At the end of this process, the executable was using roughly 435MB of RAM.  Certainly more than when it started but I think that’s acceptable. The database where all this is stored started out at 100MB.  After processing 170GB of trace files the database had grown to 203MB.  The space savings are due to the “datawarehouse-ish” design and only storing a summary of each trace file. You can download ClearTrace for SQL Server 2008 or test out the beta version for SQL Server 2012.  Happy Tuning!

  Read the article

• SharePoint Thoughts

  - by Tim Murphy

  I was listening to .NET Rocks episode #713 and it got me thinking about a number of SharePoint related topics. I have been working with SharePoint since the 2001 product came out and have watched it evolve over the years.  Today SharePoint is one of the most powerful and flexible products in the market.  Of course that doesn’t mean there isn’t room for improvement (a lot of improvement in fact) and with much power comes much responsibility. My main gripe these days is that you have to develop on a server instance.  This adds a real barrier to entry for developers.  You either have to run VMWare or Hyper-V on your developer machine or actually develop on your dev server for most tasks.  Yes, there is a way to setup a Windows 7 machine with the SharePoint components but it is very hackish. Beyond that the tools in VS2010 are a great leap forward from past generations.  Not requiring a separate package creation tool is not the least of the improvements.  Better workflow and web part development have also eased the burden of many developers. The other thing the show brought up in my thoughts was more around usage.  Users want to be able to self server everything without regard to what affect that has on leveraging their data from a corporate perspective.  My coworkers who work on Lotus Notes ask why the user can’t just do what ever they want? Part of the reason is that those features have not been built, but the other part is that giving them those features is often like giving an infant a loaded hand gun.  You can do it but it doesn’t make it the smart thing to do. As with any tool that is going to be used in the enterprise it should be subject to governance.  If controls are not in place as they said in the episode of DNR the document libraries and I believe SharePoint in general starts to look as disarrayed and unusable as a shared drive.  Consider these factors before giving into every whim of the users.  You should be able to explain to them the tradeoffs of giving them full control versus being able to leverage the information they collect to the benefit of the organization. These are just a couple of the thoughts that were triggered by the show.  I’m sure there are more discussions that can be had.  Feel free to leave your comments about the pros and cons of SharePoint. del.icio.us Tags: .NET Rocks,SharePoint,software development

  Read the article

• A little gem from MPN&ndash;FREE online course on Architectural Guidance for Migrating Applications to Windows Azure Platform

  - by Eric Nelson

  I know a lot of technical people who work in partners (ISVs, System Integrators etc). I know that virtually none of them would think of going to the Microsoft Partner Network (MPN) learning portal to find some deep and high quality technical content. Instead they would head to MSDN, Channel 9, msdev.com etc. I am one of those people :-) Hence imagine my surprise when i stumbled upon this little gem Architectural Guidance for Migrating Applications to Windows Azure Platform (your company and hence your live id need to be a member of MPN – which is free to join). This is first class stuff – and represents about 4 hours which is really 8 if you stop and ponder :) Course Structure The course is divided into eight modules.  Each module explores a different factor that needs to be considered as part of the migration process. Module 1:  Introduction:  This section provides an introduction to the training course, highlighting the values of the Windows Azure Platform for developers. Module 2:  Dynamic Environment: This section goes into detail about the dynamic environment of the Windows Azure Platform. This session will explain the difference between current development states and the Windows Azure Platform environment, detail the functions of roles, and highlight development considerations to be aware of when working with the Windows Azure Platform. Module 3:  Local State: This session details the local state of the Windows Azure Platform. This section details the different types of storage within the Windows Azure Platform (Blobs, Tables, Queues, and SQL Azure). The training will provide technical guidance on local storage usage, how to write to blobs, how to effectively use table storage, and other authorization methods. Module 4:  Latency and Timeouts: This session goes into detail explaining the considerations surrounding latency, timeouts and how to assess an IT portfolio. Module 5:  Transactions and Bandwidth: This session details the performance metrics surrounding transactions and bandwidth in the Windows Azure Platform environment. This session will detail the transactions and bandwidth costs involved with the Windows Azure Platform and mitigation techniques that can be used to properly manage those costs. Module 6:  Authentication and Authorization: This session details authentication and authorization protocols within the Windows Azure Platform. This session will detail information around web methods of authorization, web identification, Access Control Benefits, and a walkthrough of the Windows Identify Foundation. Module 7:  Data Sensitivity: This session details data considerations that users and developers will experience when placing data into the cloud. This section of the training highlights these concerns, and details the strategies that developers can take to increase the security of their data in the cloud. Module 8:  Summary Provides an overall review of the course.

  Read the article

• New Features Of WordPress 3.3 You Must Know

  - by Gopinath

  After months of beta testing, WordPress 3.3 version is going to be released at the end of this month. There are several new features packed in the new version and few of them are going to excite WordPress admins. In this post we are going to discuss about the exciting new features. 1. Drag and Drop Media Uploads One of the biggest improvements in this version of WordPress is it’s all new media uploader. Now you can upload multiple files by just dragging & dropping, instantly resize  the images and filter files by their type. The media upload sports a brand new look WordPress adopted the Pupload plugin to power its media uploader component and it’s written by the same team who created the popular TinyMCE editor plugin. 2. Improved Admin Bar(Toolbar) The admin bar or newly called toolbar has got handful of makeovers. The not so much used items like Search box and other elements are removed to make sure that the bar is not clumsy. The user menu and the related options are moved to the right like how we see in Google’s user bar. Also there are few changes to the colour of the bar to make it more eye friendly. 3. Fly out Admin Menus All the left side bar menus of WordPress admin are now sports a fly out menu style to save a click. In the previous versions if you want to access a sub menu on the left side bar, you need to first click on the category and then choose the menu item from the expanded list. Now on just mouse over you will see a flyout of menu items. 4. Adaptive Admin – Layout Auto Adjust To Fit Various Devices If you own an iPad or any other so called tablets then you are going to love this feature. The admin site of WordPress has got a lot more friendly with tablets and smartphones. WordPress now auto adjusts layout to fit the device through which you are accessing the admin site.  Accessing admin dashboard on your tablets is going to be more fun. 5. Other Features Now that we have read the most useful 4 features here is a small list of other features that may interest you Nice Tooltips are displayed where ever possible to help the newbies to understand the usage of admin site Responsive Layouts jQuery 1.7 and jQuery UI 1.8.16 are the power horses of WordPress Performance improvements This article titled,New Features Of WordPress 3.3 You Must Know, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• JavaOne Session Report - Java ME SDK 3.2

  - by Janice J. Heiss

  Oracle Product Manager for Java ME SDK, Sungmoon Cho, presented a session, "Developing Java Mobile and Embedded Applications with Java ME SDK 3.2,” wherein he covered the basic new features of the Java ME Platform SDK 3.2, a state-of-the-art toolbox for developing mobile and embedded applications. The session began with a summary of the four main components of Java ME SDK. A device emulator allows developers to quickly run and test applications before commercialization. It supports CLDC/MIDP CLDC/IMP.NG and CLC/AGUI. A development environment assists writing, running debugging and deploying and enables on-device debugging. Samples provide developers with useful codes and frameworks. IDE Plugins – NetBeans and Eclipse – equip developers with CPU Profiler, Memory Monitor, Network Monitor, and Device Selector. This means that manual integration is no longer necessary. Cho then talked about the Java ME SDK’s on-device tooling architecture: * Java ME SDK provides an architecture ideal for on-device-debugging.* Device Manager plays the central role by managing different devices whether it is the emulator or a device that Oracle provides or recommends or a third party device as long as the devices have a Java Runtime that supports the protocol that is designated.* The Emulator provides an accurate emulation, since it uses the same code base used in Oracle’s Java ME runtime.* The Universal Emulator Interface (UEI) makes it easy for IDEs to detect the platform.He then focused on the Java ME SDK release highlights, which include: * Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. A full emulation for the runtime is provided.* Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). This is a new profile for embedded devices. * A new Custom Device Skin Creator.* An Eclipse plugin for CLDC/MIDP.* Profiling, Network monitoring, and Memory monitoring are now integrated with the NetBeans profiling tools.* Java ME SDK Update CenterCho summarized the main features: IDE Integration (NetBeans and Eclipse) enables developers to write, run, profile, and debug their applications on their favorite IDE. CPU ProfilerThis enables developers to more quickly detect the hot spot and where CPU time is being used. They can double click the method to jump directly into the source code.Memory Monitor Developers can monitor objects and memory usage in real time.Debugger on the Emulator and DeviceDevelopers can run their applications step by step, and inspect the variables to pinpoint the problem. The debugging can take place either on the emulator or the device.Embedded Application DevelopmentIMP-NG, Device Access, Logging, and AMS API Support are now available.On-Device ToolingConnect your device to your computer, and run and debug the application right on your device.Custom Device Skin CreatorDefine your own device and test on an environment that is closest to your target device. The informative session concluded with a demo that showed more concretely how to apply the new features in Java ME SDK 3.2.

  Read the article

• NVIDIA Additional Drivers Empty - maximum resolution 640x480 - Driver disappears

  - by Hannibal

  EDIT: Optimus card. For resolution please read this thread: "You do not appear to be using the nvidia x server"(screenshot included) And this: Ubuntu 11.10 problem with Nvidia Thanks! I know, I know yet another NVIDIA question. So I did all the research. I uninstalled and installed nvidia-settings and drivers and nvidia-current from PPE repositories which are the most updated ones. I executed nvidia-xconfig. I have two major problems. One: Additional Drivers setting is empty! It doesn't contain any driver although one is installed. I have executed apt-get update too. But still the list is empty. Two: If I execute nvidia-xconfig it will properly configure an xorg.conf file. I restart but the maximum resolution I got is 640x480. I tried the xrandr but I can't add any resolution to display LVDS1. Some weird error occurs. So I can't add a proprietary driver and I can't boot in with the xorg file created by Nvidia... What can I do? With some work ( unistall nvidia-current and install libgl1-mesa-glx I was able to activate some kind of usage of my card because the resolution got better... and I added bumbelbee to because I have multiple video cards... ) but still the list is empty. I don't know what to do at this point??!!! Also: this is the most important part. When I first installed my ubuntu yesterday 11.10 one I saw the driver!! The driver was there... And then I ofc updated every package from internet.. And after that it was gone. And I can't bring it back. So there must be something wrong with one of the updates. But which???? Thanks for any extra info you can provide! I'm really desperate to solve this issue.

  Read the article

• Why are my scene's depth values not being written to my DepthStencilView?

  - by dotminic

  I'm rendering to a depth map in order to use it as a shader resource view, but when I sample the depth map in my shader, the red component has a value of 1 while all other channels have a value of 0. The Texture2D I use to create the DepthStencilView is bound with the D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE flags, the DepthStencilView has the DXGI_FORMAT_D32_FLOAT format, and the ShaderResourceView's format is D3D11_SRV_DIMENSION_TEXTURE2D. I'm setting the depth map render target, then i'm drawing my scene, and once that is done, I'm the back buffer render target and depth stencil are set on the output merger, and I'm using the depth map shader resource view as a texture in my shader, but the depth value in the red channel is constantly 1. I'm not getting any runtime errors from D3D, and no compile time warning or anything. I'm not sure what I'm missing here at all. I have the impression the depth value is always being set to 1. I have not set any depth/stencil states, and AFAICT depth writing is enabled by default. The geometry is being rendered correctly so I'm pretty sure depth writing is enabled. The device is created with the appropriate debug flags; #if defined(DEBUG) || defined(_DEBUG) deviceFlags |= D3D11_CREATE_DEVICE_DEBUG | D3D11_RLDO_DETAIL; #endif This is how I create my depth map. I've omitted error checking for the sake of brevity D3D11_TEXTURE2D_DESC td; td.Width = width; td.Height = height; td.MipLevels = 1; td.ArraySize = 1; td.Format = DXGI_FORMAT_R32_TYPELESS; td.SampleDesc.Count = 1; td.SampleDesc.Quality = 0; td.Usage = D3D11_USAGE_DEFAULT; td.BindFlags = D3D11_BIND_DEPTH_STENCIL | D3D11_BIND_SHADER_RESOURCE; td.CPUAccessFlags = 0; td.MiscFlags = 0; _device->CreateTexture2D(&texDesc, 0, &this->_depthMap); D3D11_DEPTH_STENCIL_VIEW_DESC dsvd; ZeroMemory(&dsvd, sizeof(dsvd)); dsvd.Format = DXGI_FORMAT_D32_FLOAT; dsvd.ViewDimension = D3D11_DSV_DIMENSION_TEXTURE2D; dsvd.Texture2D.MipSlice = 0; _device->CreateDepthStencilView(this->_depthMap, &dsvd, &this->_dmapDSV); D3D11_SHADER_RESOURCE_VIEW_DESC srvd; srvd.Format = DXGI_FORMAT_R32_FLOAT; srvd.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D; srvd.Texture2D.MipLevels = texDesc.MipLevels; srvd.Texture2D.MostDetailedMip = 0; _device->CreateShaderResourceView(this->_depthMap, &srvd, &this->_dmapSRV);

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• From 20,663 issues to 1 issue&ndash;style-copping C5.Tests

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/05/28/from-20663-issues-to-1-issuendashstyle-copping-c5.tests.aspxI recently became interested in the potential of the C5 Collections solution from http://www.itu.dk/research/c5/, however I was dismayed at the state of the code in the unit test project, so I set about fixing the 20,663 issues detected by StyleCop. The tools I used were the latest versions of: My 64-bit development PC running Windows 8 Update with 8Gb RAM Visual Studio 2013 Ultimate with SP2 ReSharper GhostDoc Pro My first attempt had to be abandoned due to collision of class names which broke one of the unit tests. So being aware of this duplication of class names, I started again and planned to prepend the class names with the namespace name. In some cases I additionally prepended the item of the C5 collection that was being tested. So what was the condition of code at the start? Besides the sprawl of C# code not written to style cop standard, there was: 1) Placing of many classes within one physical file. 2) Namespace within name space that did not follow the project structure. 3) As already mentioned, duplication of class names across namespaces. 4) A copyright notice that spawled but had to be preserved. 5) Project sub-folders were all lower case instead of initial letter capitalised. The first step was to add a stylecop heading plus the original heading contained within a region, to every file. The next step was to run GhostDoc Pro using its “Document File” option on every file but not letting it replace the headers, I had added. This brought the number of issues down to 18,192. I then went through each file collapsing each class and prepending names as appropriate. At each step, I saved the changes to my local Git. The step was to move each class to its own file and to style-cop each file. ReSharper provides a very useful feature for doing this which also fixes missing “this.” and moves using statements inside the namespace. Some classes required minimal work whereas others required extensive work to reach the stylecop standard. The unit tests were run at each split and when each class was completed. When all was done, one issue remained which I will need to submit to stylecop team for their advice (and possibly a fix to stylecop). The updated solution has been made available at https://c5stylecopped.codeplex.com/releases/view/122785.

  Read the article

• Is this a pattern? Should it be?

  - by Arkadiy

  The following is more of a statement than a question - it describes something that may be a pattern. The question is: is this a known pattern? Or, if it's not, should it be? I've had a situation where I had to iterate over two dissimilar multi-layer data structures and copy information from one to the other. Depending on particular use case, I had around eight different kinds of layers, combined in about eight different combinations: A-B-C B-C A-C D-E A-D-E and so on After a few unsuccessful attempts to factor out the repetition of per-layer iteration code, I realized that the key difficulty in this refactoring was the fact that the bottom level needed access to data gathered at higher levels. To explicitly accommodate this requirement, I introduced IterationContext class with a number of get() and set() methods for accumulating the necessary information. In the end, I had the following class structure: class Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const = 0; }; class RecursingIterator : public Iterator { RecursingIterator(const Iterator &below); }; class IterateOverA : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // Iterate over members in dataStructure1 // locate corresponding item in dataStructure2 (passed via context) // and set it in the context // invoke the sub-iterator }; class IterateOverB : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // iterate over members dataStructure2 (form context) // set dataStructure2's item in the context // locate corresponding item in dataStructure2 (passed via context) // invoke the sub-iterator }; void main() { class FinalCopy : public Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // copy data from structure 1 to structure 2 in the context, // using some data from higher levels as needed } } IterationContext ctx(dateStructure2); IterateOverA(IterateOverB(FinalCopy())).iterate(dataStructure1, ctx); } It so happens that dataStructure1 is a uniform data structure, similar to XML DOM in that respect, while dataStructure2 is a legacy data structure made of various structs and arrays. This allows me to pass dataStructure1 outside of the context for convenience. In general, either side of the iteration or both sides may be passed via context, as convenient. The key situation points are: complicated code that needs to be invoked in "layers", with multiple combinations of layer types possible at the bottom layer, the information from top layers needs to be visible. The key implementation points are: use of context class to access the data from all levels of iteration complicated iteration code encapsulated in implementation of pure virtual function two interfaces - one aware of underlying iterator, one not aware of it. use of const & to simplify the usage syntax.

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• Developing web sites that imitate desktop apps. How to fight that paradigm? [closed]

  - by user1598390

  Supposse there's a company where web sites/apps are designed to resemble desktop apps. They struggle to add: Splash screens Drop-down menus Tab-pages Pages that don't grow downward with content, context is inside scrollable area so page is of a fixed size, as if resembling the one-screen limitation of desktop apps. Modal windows, pop-ups, etc. Tree views Absolutely no access to content unless you login-first, even with non-sensitive content. After splash screen desapears, you are presented with a login screen. No links - just simulated buttons. Fixed page-size. Cannot open a linked in other tab Print button that prints directly ( not showing printable page so the user can't print via the browser's print command ) Progress bars for loading content even when the browser indicates it with its own animation Fonts and color amulate a desktop app made with Visual Basic, PowerBuilder etc. Every app seems almost as if were made in Visual Basic. They reject this elements: Breadcrumbs Good old underlined links Generated/dynamic navigation, usage-based suggestions Ability to open links in multiple tabs Pagination Printable pages Ability to produce a URL you can save or share that links to an item, like when you send someone the link to an especific StackExchange question. The only URL is the main one. Back button To achieve this, tons of javascript code is needed. Lots and lots of Javascript and Ajax code for things not related with the business but with the necessity to hide/show that button, refresh this listbox, grey-out that label, etc. The coplexity generated by forcing one paradigm into another means most lines of code are dedicated to maintain the illusion of a desktop app. What is the best way to change this mindset, and make them embrace the web, and start producing modern, web apps instead of desktop imitations ? EDIT: These sites are intranet sites. Users hate these apps. They constantly whine about them, but they have to use them to do their daily work. These sites are in-house solutions, the end-users have no choice but to use them. They are a "captive audience". Also, substitution will not happen because of high costs. But at least if that mindset is changed, new developments would be more web-like.

  Read the article

• High-Powered Sites for low Cost

  - by HighAltitudeCoder

  Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Need Help with partitions and such Dual Booting 13.10 w/ windows 7

  - by Aymax

  so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >