Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 307/958 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• How Can We Create Blackbox Logs for Nginx?

  - by Alan Gutierrez

  There's an article out there, Profiling LAMP Applications with Apache's Blackbox Logs, that describes how to create a log that records a lot of detailed information missing in the common and combined log formats. This information is supposed to help you resolve performance issues. As the author notes "While the common log-file format (and the combined format) are great for hit tracking, they aren't suitable for getting hardcore performance data." The article describes a "blackbox" log format, like a blackbox flight recorder on an aircraft, that gathers information used to profile server performance, missing from the hit tracking log formats: Keep alive status, remote port, child processes, bytes sent, etc. LogFormat "%a/%S %X %t \"%r\" %s/%>s %{pid}P/%{tid}P %T/%D %I/%O/%B" blackbox I'm trying to recreate as much of the format for Nginx, and would like help filling in the blanks. Here's what Nginx blackbox format would look like, the unmapped Apache directives have question marks after their names. access_log blackbox '$remote_addr/$remote_port X? [$time_local] "$request"' 's?/$status $pid/0 T?/D? I?/$bytes_sent/$body_bytes_sent' Here's a table of the variables I've been able to map from the Nginx documentation. %a = $remote_addr - The IP address of the remote client. %S = $remote_port - The port of the remote client. %X = ? - Keep alive status. %t = $time_local - The start time of the request. %r = $request - The first line of request containing method verb, path and protocol. %s = ? - Status before any redirections. %>s = $status - Status after any redirections. %{pid}P = $pid - The process id. %{tid}P = N/A - The thread id, which is non-applicable to Nignx. %T = ? - The time in seconds to handle the request. %D = $request_time - The time in milliseconds to handle the request. %I = ? - The count of bytes received including headers. %O = $bytes_sent - The count of bytes sent including headers. %B = $body_bytes_sent - The count of bytes sent excluding headers, but with a 0 for none instead of '-'. Looking for help filling in the missing variables, or confirmation that the missing variables are in fact, unavailable in Nginx.

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• cygWin connect by SSH using RSA key; ssh.exe couldn't create /home/user/.ssh

  - by Kirzilla

  I'm using Win XP and I'm trying to connect by SSH to remote host using RSA key. I've investigated that cygWin recognizes Documents and Settings dir as home directory Z:\app\cwRsync\bin>cygpath -H /cygdrive/c/Documents and Settings I've created .ssh directory in Documents and Settings/user/.ssh and moved known_hosts, id_rsa, id_rsa.pub there. Now, I'm trying to connect via ssh.exe to remote host Z:\app\cwRsync\bin>ssh -p 22 [email protected] Could not create directory '/home/user/.ssh'. The authenticity of host '[remotehost.com]:22 ([remotehost.com]:22)' can't be established. RSA key fingerprint is f7:f4:2c:e0:c6:7e:d2:a4:45:70:63:df:bf:f2:84:46. Are you sure you want to continue connecting (yes/no)? What I'm doing wrong? Why ssh.exe couldn't create directory /home/user/.ssh? Thank you.

  Read the article

• Windows 7 - All Icons Missing, Explorer Progress Bar Never Finishes, Libraries Gone

  - by Alex

  since yesterday i've had three issues which all arose at the same time. windows 7 x64, i7 2.8ghz 12gb ddr3 1 - my libraries, favorites, drives are missing...basically the entire sidebar is gone. http://i.imgur.com/m8pRQ.png. yet when i open a dialog, my libraries and drives are back to normal ONLY for the dialog. i tried Restore Default Libraries. it works one time, but when i open libraries again i go back to the empty mess. restarting the computer temporarily fixes the problem. 2 - in the explorer window that's showing libraries, when i navigate to a certain folder i get an unending progress bar (the kind that turns the address bar green). yesterday when the problem started, i was saving a file to this folder. the program writing the file crashed during the write and i believe that's what caused the problem. i have sugarsync backing up that folder and when i restarted the computer sugarsync informed me that its database was corrupted, so i had to uninstall and reinstall the software. 3 - icons are missing. the Rebuild Icon Cache did not fix this. http://i.imgur.com/r9pgo.png restarting the computer temporarily fixes these problems, but when i open the directory with the initial write problem, everything stops working. edit: i should note that i did a chkdsk /f and it repaired problems. i also did the thing that verifies then restores windows files (can't remember the command now), which reported that everything was normal.

  Read the article

• Want to SASL/TLS authentication

  - by Naval

  I want to send mail from remote client from my server(centos 5 and 64 bit) for this i need to sasl auth but i have no idea about it what changes i have to make in my server and client here I want to make things more clear my server's hostname/Ip is = test02.s80.in/176.67.172.209 now i want to authenticat remote client vps2.smail.info and vps1.smail.info to deliver mail .. so plz help me if any systematic way to do sasl/tls authentication for these clients... i am using DNS load-balancing(round-robin) mx record lookup technique for load balancing..

  Read the article

• How to access remotly to a mysql server?

  - by ÉricP

  Hi, I'm trying to access my remote mysql server from my own computer. I uncommented: bind-address = 80.10.65.45 I added 80.10.65.45 as a server in privilege root 80.10.65.45 yes ALL PRIVILEGES yes I'm using Sequel Pro on MacosX to connect via SSH here is the debug log: debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:58517 forwarded to remote address 127.0.0.1:3306 debug1: Local forwarding listening on ::1 port 58517. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 58517. debug1: channel 1: new [port listener] debug1: Entering interactive session. debug1: Connection to port 58517 forwarding to 127.0.0.1 port 3306 requested. debug1: channel 2: new [direct-tcpip] channel 2: open failed: connect failed: Connection refused debug1: channel 2: free: direct-tcpip: listening port 58517 for 127.0.0.1 port 3306, connect from 127.0.0.1 port 58519, nchannels 3

  Read the article

• Client unable to access OWA website after temporarily changing SSL certificate on the server

  - by Lorenz Meyer

  I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

  Read the article

• Fedora installed in Legacy mode, how to make it work in UEFI?

  - by TryntaLearn

  I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

  Read the article

• How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

  - by Boris Okun

  The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

  Read the article

• Limit number of simultaneous connections squid makes to a single server

  - by Ben Voigt

  Note: I am asking about outbound concurrent connection limits, not inbound, which is sufficiently covered on existing questions Modern browsers typically open a large number of simultaneous connections, to take advantage of the fact that TCP fairly shares bandwidth between connections. Of course, this doesn't result in fair sharing between users, so some servers have started penalizing hosts which open too many connections. This limit can be configured client-side (e.g. IE MaxConnectionsPerServer, Firefox network.http.max-connections-per-server), but the method differs for each browser and version, and many users aren't competent to adjust it themselves. So we turn to a squid transparent HTTP proxy for central management of HTTP download. How can the number of simultaneous connections from squid to a remote webserver be limited, so the webserver doesn't perceive it as abuse of concurrent connections? Ideally the limit would be per source address. Squid should accept virtually unlimited concurrent requests from the client browser, and issue them sequentially to the remote server, only N at a time, delaying (but not dropping) the others.

  Read the article

• Windows Server 2008 R2 loses ability to connect to network share

  - by JamesB

  I could sure use some help with this one: I've got two Windows Server 2008 R2 x64 Terminal Servers, as well as several 2003 servers (DNS / Wins / AD / DC). On the two 2008 boxes, every now and then they will get in this mode where you can't map a drive to a random server. I say random server because it's not always the same server that you can't map to. Here is a summary of what I can and can't do: net view \\servername Sometimes this works, sometimes it does not. net view \\FQDN This always works. net view \\IPAddress This always works. ping servername Sometimes this works, sometimes it does not. ping FQDN This always works. ping IPAddress This always works. I've been looking all over for a solution to this. It sure seems like Microsoft would have a hotfix by now. The kicker to this is that it sometimes works great, especially after a reboot. It may run for 2 weeks just fine, but all of a sudden it will fail to resolve the remote server name. It will then be this way for a few days, then it might start working again. Also, while it's in the mode of not working, the other servers have no problem getting there. It's just these 2008 R2 Terminal Servers. Setting a static entry in the Hosts file and LMHosts does not make it work. All servers have static IPs and they are registered in DNS and Wins just fine. Here is a long thread on MS Technet of the exact same problem, but they don't have a good solution. Here is their workaround (It was from June of 2010): Good news - a hotfix is in the works and a workaround has been identified: Root cause is that since this is SMB1 all user sessions are on a single TCP connection to the remote server. The first user to initiate a connection to the remote SMB server has their logon-ID added to the structure defining the connection. If that user logs off all subsequent uses of that TCP session fail as the logon-id is no longer valid. As a workaround for now to keep the issue from happening you will want to have the user not logoff the Terminal Server only disconnect their sessions. Any word from anyone out there about a solution? Any help would sure be appreciated. Thanks, James

  Read the article

• rsync osx to linux

  - by Nick

  I did a backup to a remote nfs folder with rsync, from a MAC to a Remote Debian. The final backup is 58GB less than the original. Rsync says that everything was OK, and nothing to update. Macintosh:/Volumes/Data1 root# du -sh Produccion/ 319G Produccion/ root@Disketera:/mnt/soho_storage/samba/shares# du -sh Produccion/ 260G Produccion/ can I trust in rsync? I'm using rsync -av --stats /Volumes/Data1/Produccion/ /mnt/red/ (/mnt/red is my samba mountpoint) Some differents folders root@Disketera:/mnt/soho_storage/samba/shares/Produccion/tiposok# du -sh * 0 IndoSanBol 0 IndoSans-Bold 0 IndoSans-Italic 0 IndoSans-Light 0 IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 12K TCL IndoSans_mac Macintosh:/Volumes/Data1/Produccion/tiposok root# du -sh * 36K IndoSanBol 40K IndoSans-Bold 36K IndoSans-Italic 36K IndoSans-Light 36K IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 160K TCL IndoSans_mac

  Read the article

• How can I switch Linux running OS from disk to running from RAM without restarting?

  - by vfclists

  Is it possible to switch to running Linux from RAM or RAM disk after starting starting initially from disk? eg. You need to make an image of your hard disk, FTP it to a remote location, some time later you want the image back, so you start the system from disk as usual, restore the image you FTP'd from the remote location back into place. More like a CloneZilla backup and restore, without booting the server from CD or USB disk, but starting from the normal hard disk? Notes on environment I should have mentioned it earlier. It is a remotely hosted VM where I cannot boot into a recovery console mode or do a netinstall. It will always boot onto the same disk. Which means that if there is some serious corruption I can't repair it offline, which is why being able to ftp a previously saved backup into place is so important

  Read the article

• Is it possible to use WebMatrix with pure IIS?

  - by Mike Christensen

  I'd like to check out WebMatrix for publishing our site to IIS automatically (right now, I have to zip it up, copy it out, Remote Desktop into the server, unzip it, etc). However, every example I can find on how to setup WebMatrix involves Azure, or using a .publishsettings file that you'd get from your hosting provider. I'm curious if I can publish to a normal, every day IIS server running on Windows Server 2008. So far, all I've done to the IIS server is install Web Deploy, which I believe is the protocol that WebMatrix uses to publish. When I enter the Remote Site Settings screen, I select Enter settings. I select Web Deploy as the protocol, type in my NT domain credentials (I'm an Admin on that server). I put in the site URL for the Site Name and Destination URL. When I click Validate Connection, I get: Am I doing something wrong, or is this just not possible to do?

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• How I can recover files when the folder shows empty but the files are not deleted?

  - by Borror0

  Yesterday, my laptop caught a virus which caused massive damage. Since them, I have been trying to recover important files before reformatting my computer, a task the virus has not made easy. Restoration points predating the attack have been deleted. Most of my folders show empty. My Start menu is essentially empty, with the exception of Trillian and Mirror's Edge. The same goes for my Desktop, which only has programs which were installed after the attack. Searching for files though my computer is pretty much useless, as it only rarely brings up anything. I suspect most of my files have not been deleted. While my folders show empty, uTorrent still does display them and I can open them from here. Unfortunately, when I select Open Containing Folder, the folder still shows as completely empty even if I'm currently watching a video from that very folder. Further adding evidence to the not-deleted, just-missing theory, the data recovery software I'm using (Restoration) cannot find only find an handful of the missing files. If they were deleted, I could do a forensic recovery to get them back but since they're probably still somewhere on my computer, just out out of my reach, I can't find them. Under those circumstances, is there a way I can recover those files?

  Read the article

• Leave Windows Session Logged On

  - by Kyle Brandt

  Is a bad idea for any reason to leave accounts logged onto Windows remote desktop sessions? So instead of logging off, just closing the session so it locks. In this case, the limited number of remote desktop connections is not an issue. I am just wondering if anyone has seen sessions leak memory over time or maybe security issues with doing this, etc... I could see if programs were left open they might suck up and or leak memory, but has anyone seen this with Microsoft software such as Control Panels, Management Consoles, and Exchange System Administrator?

  Read the article

• Rollback driver in Windows via command line

  - by ultrasawblade

  I have a remote system in which I've updated the Nvidia graphics driver, but now RDPDD.dll, which I'm guessing stands for RDP Display Driver, will not load (found this out via Event Viewer). I can use Sysinternal's Psexec to execute commands though. I'm sure something has gone very wrong and the user of this system (a CAD engineer) won't be able to use his system normally. I've tried two remote reboots and that has not resolved the issue. So I would like to use the "Roll Back" option for the Nvidia driver in the device manager. Is there a command-line way of doing this?

  Read the article

• Datacenter Backup Strategy

  - by EasyEcho

  What are common approaches to backup solutions in remote data centers? I am already familiar with general backup principals and have a very good backup strategy for our local data center but am having great difficulty extending it to a remote data center. We currently do a full backup on Friday, differential Mon - Thu, rotate offsite Friday morning ...rinse and repeat week after week. BTW, we use disks and have been very happy with this approach. We could buy a large storage server and backup everything to it, but this solution doesn't give you offsite. We could encrypt and upload to Amazon or some other online storage but that would take a large amount of time given the data and would be rather expensive paying for the bandwidth leaving the data center and receiving at amazon. We could drive to the data center every Friday and continue to rotate disks as we do now. But that just seems old fashion. What am I missing, are there better options?

  Read the article

• File locked / read-only

  - by oshirowanen

  On a networked computer, I have a file which is coming up as read-only because someone else has it open. This is not true. This is a file stored locally on the computer and it is not being used by anyone else. I can login to the same computer using a different user, and the file opens up fine. I just get the issue with a particular user account. Other than deleting theses account/profile and creating it again, how can I unlock this file? Double clicking on this file gives me a message saying The file is locked for editing by another user, or the file (or the folder in which it is located,) is marked as read-only, or you specified that you wanted to open this file read-only. I don't think the folder is locked, because I can use other files in that folder fine, it's just 1 particular file which is causing this issue. I know that only 1 user is using this file as the file is on his c: and the same file works fine if he logs off to allow another user to log in.

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

• Access hamachi machines from iPad / iphone [closed]

  - by Yas

  Is it possible to access a remote desktop from the iPhone or iPad on hamachi.

  Read the article

• Soundtest works, but no other sounds and windows starts very slowly

  - by Kristian Kari

  So suddenly all sounds on my computer stopped working expect the sound test works, but when I go to control panel and audio it says there's no audio device. And audio players and audio on website doesn't work either. and Also windows starts very slowly. I'm not sure if this helps but I'll tell what happened before this. I downloaded this program from a little shady website, I hesitated and for a good reason I guess cos the moment I finished downloading it, my antivir detected it as unwanted program and put it on quarantine. I thought everything was fine, but had some problems with program (won't go to details about it cos it's not really related to audio) so rebooted the computer and I was suprised that windows started really really slowly. It took like 5 mins to load the desktop such. After that I noticed the sounds were missing, I immediately deleted the program since I thought it was causing the problem. But it didn't change much. I tried to find the solution with no success and now I'm just scanning again my computer. I'd be thankful if anyone would be able to help me. I might have left a thing or ten things out, so feel free to ask. oh and I'm using windows xp

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >