how to use ajax hoverme - Page 308

System Requirements of a write-heavy applications serving hundreds of requests per second

- by Rolando Cruz

NOTE: I am a self-taught PHP developer who has little to none experience managing web and database servers. I am about to write a web-based attendance system for a very large userbase. I expect around 1000 to 1500 users logged-in at the same time making at least 1 request every 10 seconds or so for a span of 30 minutes a day, 3 times a week. So it's more or less 100 requests per second, or at the very worst 1000 requests in a second (average of 16 concurrent requests? But it could be higher given the short timeframe that users will make these requests. crosses fingers to avoid 100 concurrent requests). I expect two types of transactions, a local (not referring to a local network) and a foreign transaction. local transactions basically download userdata in their locality and cache it for 1 - 2 weeks. Attendance equests will probably be two numeric strings only: userid and eventid. foreign transactions are for attendance of those do not belong in the current locality. This will pass in the following data instead: (numeric) locality_id, (string) full_name. Both requests are done in Ajax so no HTML data included, only JSON. Both type of requests expect at the very least a single numeric response from the server. I think there will be a 50-50 split on the frequency of local and foreign transactions, but there's only a few bytes of difference anyways in the sizes of these transactions. As of this moment the userid may only reach 6 digits and eventid are 4 to 5-digit integers too. I expect my users table to have at least 400k rows, and the event table to have as many as 10k rows, a locality table with at least 1500 rows, and my main attendance table to increase by 400k rows (based on the number of users in the users table) a day for 3 days a week (1.2M rows a week). For me, this sounds big. But is this really that big? Or can this be handled by a single server (not sure about the server specs yet since I'll probably avail of a VPS from ServInt or others)? I tried to read on multiple server setups Heatbeat, DRBD, master-slave setups. But I wonder if they're really necessary. the users table will add around 500 1k rows a week. If this can't be handled by a single server, then if I am to choose a MySQL replication topology, what would be the best setup for this case? Sorry, if I sound vague or the question is too wide. I just don't know what to ask or what do you want to know at this point.

Read the article

Will spreading your servers load not just consume more recourses

- by Saif Bechan

I am running a heavy real-time updating website. The amount of recourses needed per user are quite high, ill give you an example. Setup Every visit The application is php/mysql so on every visit static and dynamic content is loaded. Recourses: apache,php,mysql Every second (no more than a second will just be too long) The website needs to be updated real-time so every second there is an ajax call thats updates the website. Recourses: jQuery,apache,php,mysql Avarage spending for single user (spending one minute and visited 3 pages) Apache: +/- 63 requests / responsess serving static and dynamic content (img,css,js,html) php: +/- 63 requests / responses mysql: +/- 63 requests / responses jquery: +/- 60 requests / responses Optimization I want to optimize this process, but I think that maybe it would be just the same in the end. Before implementing and testing (which will take weeks) I wanted to have some second opinions from you guys. Every visit I want to start off with having nginx in the front and work as a proxy to deliver the static content. Recources: Dynamic: apache,php,mysql Static: nginx This will spread the load on apache a lot. Every Second For the script that loads every second I want to set up Node.js server side javascript with nginx in te front. I want to set it up that jquery makes a request ones a minute, and node.js streams the data to the client every second. Recources: jQuery,nginx,node.js,mysql Avarage spending for single user (spending one minute and visited 3 pages) Nginx: 4 requests / responsess serving mostly static conetent(img,css,js) Apache: 3 requests only the pages php: 3 requests only the pages node.js: 1 request / 60 responses jquery: 1 request / 60 responses mysql: 63 requests / responses Optimization As you can see in the optimisation the load from Apache and PHP are lifted and places on nginx and node.js. These are known for there light footprint and good performance. But I am having my doubts, because there are still 2 programs extra loaded in the memory and they consume cpu. So it it better to have less programs that do the job, or more. Before I am going to spend a lot of time setting this up I would like to know if it will be worth the while.

Read the article

ASP.NET Podcast Show #148 - ASP.NET WebForms to build a Mobile Web Application

- by Wallym

Check the podcast site for the original url. This is the video and source code for an ASP.NET WebForms app that I wrote that is optimized for the iPhone and mobile environments. Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download M4V for iPhone/iPad. Download MP3. Link to iWebKit. Source Code: <%@ Page Title="MapSplore" Language="C#" MasterPageFile="iPhoneMaster.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="AT_iPhone_Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="Content" Runat="Server" ClientIDMode="Static"> <asp:ScriptManager ID="sm" runat="server" EnablePartialRendering="true" EnableHistory="false" EnableCdn="true" /> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script language="javascript" type="text/javascript">  </script> <asp:HiddenField ID="Latitude" runat="server" /> <asp:HiddenField ID="Longitude" runat="server" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js%22%3E%3C/script> <script language="javascript" type="text/javascript"> $(document).ready(function () { GetLocation(); setupMapDiv(); setupPlaceIveBeen(); }); function GetLocation() { if (navigator.geolocation != null) { navigator.geolocation.getCurrentPosition(getData); } else { var mess = document.getElementById('<%=Message.ClientID %>'); mess.innerHTML = "Sorry, your browser does not support geolocation. " + "Try the latest version of Safari on the iPhone, Android browser, or the latest version of FireFox."; } } function UpdateLocation_Click() { GetLocation(); } function getData(position) { var latitude = position.coords.latitude; var longitude = position.coords.longitude; var hdLat = document.getElementById('<%=Latitude.ClientID %>'); var hdLon = document.getElementById('<%=Longitude.ClientID %>'); hdLat.value = latitude; hdLon.value = longitude; } </script> <asp:Label ID="Message" runat="server" /> <asp:UpdatePanel ID="upl" runat="server"> <ContentTemplate> <asp:Panel ID="pnlStart" runat="server" Visible="true"> <div id="topbar"> <div id="title">MapSplore</div> </div> <div id="content"> <ul class="pageitem"> <li class="menu"> <asp:LinkButton ID="lbLocalDeals" runat="server" onclick="lbLocalDeals_Click"> <asp:Image ID="imLocalDeals" runat="server" ImageUrl="~/Images/ArtFavor_Money_Bag_Icon.png" Height="30" /> <span class="name">Local Deals.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbLocalPlaces" runat="server" onclick="lbLocalPlaces_Click"> <asp:Image ID="imLocalPlaces" runat="server" ImageUrl="~/Images/Andy_Houses_on_the_horizon_-_Starburst_remix.png" Height="30" /> <span class="name">Local Places.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbWhereIveBeen" runat="server" onclick="lbWhereIveBeen_Click"> <asp:Image ID="imImHere" runat="server" ImageUrl="~/Images/ryanlerch_flagpole.png" Height="30" /> <span class="name">I've been here.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbMyStats" runat="server"> <asp:Image ID="imMyStats" runat="server" ImageUrl="~/Images/Anonymous_Spreadsheet.png" Height="30" /> <span class="name">My Stats.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="menu"> <asp:LinkButton ID="lbAddAPlace" runat="server" onclick="lbAddAPlace_Click"> <asp:Image ID="imAddAPlace" runat="server" ImageUrl="~/Images/jean_victor_balin_add.png" Height="30" /> <span class="name">Add a Place.</span> <span class="arrow"></span> </asp:LinkButton> </li> <li class="button"> <input type="button" value="Update Your Current Location" onclick="UpdateLocation_Click()"> </li> </ul> </div> </asp:Panel> <div> <asp:Panel ID="pnlCoupons" runat="server" Visible="false"> <div id="topbar"> <div id="title">MapSplore</div> <div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromDeals" OnClick="ReturnFromDeals_Click" /></div></div> <div class="content"> <asp:ListView ID="lvCoupons" runat="server"> <LayoutTemplate> <ul class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Place.Name") %>' OnClick="lbBusiness_Click"> <span class="comment"> <asp:Label ID="lblAddress" runat="server" Text='<%#Eval("Place.Address1") %>' /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Place.Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> </span> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView><asp:GridView ID="gvCoupons" runat="server" AutoGenerateColumns="false"> <HeaderStyle BackColor="Silver" /> <AlternatingRowStyle BackColor="Wheat" /> <Columns> <asp:TemplateField AccessibleHeaderText="Business" HeaderText="Business"> <ItemTemplate> <asp:Image ID="imPlaceType" runat="server" Text='<%#Eval("Type") %>' ImageUrl='<%#Eval("Image") %>' /> <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Name") %>' OnClick="lbBusiness_Click" /> <asp:LinkButton ID="lblAddress" runat="server" Text='<%#Eval("Address1") %>' CssClass="smallText" /> <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>' CssClass="smallText" /> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' /> <asp:Label ID="lblInfo" runat="server" Visible="false" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </div> </asp:Panel> <asp:Panel ID="pnlPlaces" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Return" ID="ReturnFromPlaces" OnClick="ReturnFromPlaces_Click" /></div></div> <div id="content"> <asp:ListView ID="lvPlaces" runat="server"> <LayoutTemplate> <ul id="ulPlaces" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> <li class="menu"> <asp:LinkButton ID="lbNotListed" runat="server" CssClass="name" OnClick="lbNotListed_Click"> Place not listed <span class="arrow"></span> </asp:LinkButton> </li> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu"> <asp:LinkButton ID="lbImHere" runat="server" CssClass="name" OnClick="lbImHere_Click"> <%#DisplayName(Eval("Name")) %>  <%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %> <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' /> <span class="arrow"></span> </asp:LinkButton></li></ItemTemplate></asp:ListView> </div> </asp:Panel> <asp:Panel ID="pnlImHereNow" runat="server" Visible="false"> <div id="topbar"> <div id="title"> MapSplore</div><div id="leftbutton"> <asp:LinkButton runat="server" Text="Places" ID="lbImHereNowReturn" OnClick="lbImHereNowReturn_Click" /></div></div> <div id="rightbutton"> <asp:LinkButton runat="server" Text="Beginning" ID="lbBackToBeginning" OnClick="lbBackToBeginning_Click" /> </div> <div id="content"> <ul class="pageitem"> <asp:HiddenField ID="hdPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceLat" runat="server" /> <asp:HiddenField ID="hdPlaceLon" runat="server" /> <asp:HiddenField ID="hdPlaceTitle" runat="server" /> <asp:Button ID="btnImHereNow" runat="server" Text="I'm here" OnClick="btnImHereNow_Click" /> <asp:Label ID="lblPlaceTitle" runat="server" /><br /> <asp:TextBox ID="txtWhatsHappening" runat="server" TextMode="MultiLine" Rows="2" style="width:300px" /><br /> <div id="divImHere" style="width:300px; height:300px"></div> </div> </ul> </asp:Panel> <asp:Panel runat="server" ID="pnlIveBeenHere" Visible="false"> <div id="topbar"> <div id="title"> Where I've been</div><div id="leftbutton"> <asp:LinkButton ID="lbIveBeenHereBack" runat="server" Text="Back" OnClick="lbIveBeenHereBack_Click" /></div></div> <div id="content"> <asp:ListView ID="lvWhereIveBeen" runat="server"> <LayoutTemplate> <ul id="ulWhereIveBeen" class="pageitem" runat="server"> <asp:PlaceHolder ID="itemPlaceholder" runat="server" /> </ul> </LayoutTemplate> <ItemTemplate> <li class="menu" runat="server"> <asp:LinkButton ID="lbPlaceIveBeen" runat="server" OnClick="lbPlaceIveBeen_Click" CssClass="name"> <asp:Label ID="lblPlace" runat="server" Text='<%#Eval("PlaceName") %>' /> at <asp:Label ID="lblTime" runat="server" Text='<%#Eval("ATTime") %>' CssClass="content" /> <asp:HiddenField ID="hdATID" runat="server" Value='<%#Eval("ATID") %>' /> <span class="arrow"></span> </asp:LinkButton> </li> </ItemTemplate> </asp:ListView> </div> </asp:Panel> <asp:Panel runat="server" ID="pnlPlaceIveBeen" Visible="false"> <div id="topbar"> <div id="title"> I've been here </div> <div id="leftbutton"> <asp:LinkButton ID="lbPlaceIveBeenBack" runat="server" Text="Back" OnClick="lbPlaceIveBeenBack_Click" /> </div> <div id="rightbutton"> <asp:LinkButton ID="lbPlaceIveBeenBeginning" runat="server" Text="Beginning" OnClick="lbPlaceIveBeenBeginning_Click" /> </div> </div> <div id="content"> <ul class="pageitem"> <li> <asp:HiddenField ID="hdPlaceIveBeenPlaceId" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLatitude" runat="server" /> <asp:HiddenField ID="hdPlaceIveBeenLongitude" runat="server" /> <asp:Label ID="lblPlaceIveBeenName" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenAddress" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCity" runat="server" />, <asp:Label ID="lblPlaceIveBeenState" runat="server" /> <asp:Label ID="lblPlaceIveBeenZipCode" runat="server" /><br /> <asp:Label ID="lblPlaceIveBeenCountry" runat="server" /><br /> <div id="divPlaceIveBeen" style="width:300px; height:300px"></div> </li> </ul> </div> </asp:Panel> <asp:Panel ID="pnlAddPlace" runat="server" Visible="false"> <div id="topbar"><div id="title">MapSplore</div><div id="leftbutton"><asp:LinkButton ID="lbAddPlaceReturn" runat="server" Text="Back" OnClick="lbAddPlaceReturn_Click" /></div><div id="rightnav"></div></div><div id="content"> <ul class="pageitem"> <li id="liPlaceAddMessage" runat="server" visible="false"> <asp:Label ID="PlaceAddMessage" runat="server" /> </li> <li class="bigfield"> <asp:TextBox ID="txtPlaceName" runat="server" placeholder="Name of Establishment" /> </li> <li class="bigfield"> <asp:TextBox ID="txtAddress1" runat="server" placeholder="Address 1" /> </li> <li class="bigfield"> <asp:TextBox ID="txtCity" runat="server" placeholder="City" /> </li> <li class="select"> <asp:DropDownList ID="ddlProvince" runat="server" placeholder="Select State" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtZipCode" runat="server" placeholder="Zip Code" /> </li> <li class="select"> <asp:DropDownList ID="ddlCountry" runat="server" onselectedindexchanged="ddlCountry_SelectedIndexChanged" /> <span class="arrow"></span> </li> <li class="bigfield"> <asp:TextBox ID="txtPhoneNumber" runat="server" placeholder="Phone Number" /> </li> <li class="checkbox"> <span class="name">You Here Now:</span> <asp:CheckBox ID="cbYouHereNow" runat="server" Checked="true" /> </li> <li class="button"> <asp:Button ID="btnAdd" runat="server" Text="Add Place" onclick="btnAdd_Click" /> </li> </ul></div> </asp:Panel> <asp:Panel ID="pnlImHere" runat="server" Visible="false"> <asp:TextBox ID="txtImHere" runat="server" TextMode="MultiLine" Rows="3" Columns="40" /><br /> <asp:DropDownList ID="ddlPlace" runat="server" /><br /> <asp:Button ID="btnHere" runat="server" Text="Tell Everyone I'm Here" onclick="btnHere_Click" /><br /> </asp:Panel> </div> </ContentTemplate> </asp:UpdatePanel> </asp:Content> Code Behind .cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using LocationDataModel; public partial class AT_iPhone_Default : ViewStatePage{ private iPhoneDevice ipd; protected void Page_Load(object sender, EventArgs e) { LocationDataEntities lde = new LocationDataEntities(); if (!Page.IsPostBack) { var Countries = from c in lde.Countries select c; foreach (Country co in Countries) { ddlCountry.Items.Add(new ListItem(co.Name, co.CountryId.ToString())); } ddlCountry_SelectedIndexChanged(ddlCountry, null); if (AppleIPhone.IsIPad()) ipd = iPhoneDevice.iPad; if (AppleIPhone.IsIPhone()) ipd = iPhoneDevice.iPhone; if (AppleIPhone.IsIPodTouch()) ipd = iPhoneDevice.iPodTouch; } } protected void btnPlaces_Click(object sender, EventArgs e) { } protected void btnAdd_Click(object sender, EventArgs e) { bool blImHere = cbYouHereNow.Checked; string Place = txtPlaceName.Text, Address1 = txtAddress1.Text, City = txtCity.Text, ZipCode = txtZipCode.Text, PhoneNumber = txtPhoneNumber.Text, ProvinceId = ddlProvince.SelectedItem.Value, CountryId = ddlCountry.SelectedItem.Value; int iProvinceId, iCountryId; double dLatitude, dLongitude; DataAccess da = new DataAccess(); if ((!String.IsNullOrEmpty(ProvinceId)) && (!String.IsNullOrEmpty(CountryId))) { iProvinceId = Convert.ToInt32(ProvinceId); iCountryId = Convert.ToInt32(CountryId); if (blImHere) { dLatitude = Convert.ToDouble(Latitude.Value); dLongitude = Convert.ToDouble(Longitude.Value); da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber, dLatitude, dLongitude); } else { da.StorePlace(Place, Address1, String.Empty, City, iProvinceId, ZipCode, iCountryId, PhoneNumber); } liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Awesome, your place has been added. Add Another!"; txtPlaceName.Text = String.Empty; txtAddress1.Text = String.Empty; txtCity.Text = String.Empty; ddlProvince.SelectedIndex = -1; txtZipCode.Text = String.Empty; txtPhoneNumber.Text = String.Empty; } else { liPlaceAddMessage.Visible = true; PlaceAddMessage.Text = "Please select a State and a Country."; } } protected void ddlCountry_SelectedIndexChanged(object sender, EventArgs e) { string CountryId = ddlCountry.SelectedItem.Value; if (!String.IsNullOrEmpty(CountryId)) { int iCountryId = Convert.ToInt32(CountryId); LocationDataModel.LocationDataEntities lde = new LocationDataModel.LocationDataEntities(); var prov = from p in lde.Provinces where p.CountryId == iCountryId orderby p.ProvinceName select p; ddlProvince.Items.Add(String.Empty); foreach (Province pr in prov) { ddlProvince.Items.Add(new ListItem(pr.ProvinceName, pr.ProvinceId.ToString())); } } else { ddlProvince.Items.Clear(); } } protected void btnImHere_Click(object sender, EventArgs e) { int i = 0; DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value), Lon = Convert.ToDouble(Longitude.Value); List<Place> lp = da.NearByLocations(Lat, Lon); foreach (Place p in lp) { ListItem li = new ListItem(p.Name, p.PlaceId.ToString()); if (i == 0) { li.Selected = true; } ddlPlace.Items.Add(li); i++; } pnlAddPlace.Visible = false; pnlImHere.Visible = true; } protected void lbImHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; ListViewItem lvi = (ListViewItem)(((LinkButton)sender).Parent); HiddenField hd = (HiddenField)lvi.FindControl("hdPlaceId"); long PlaceId = Convert.ToInt64(hd.Value); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); Place pl = da.GetPlace(PlaceId); pnlImHereNow.Visible = true; pnlPlaces.Visible = false; hdPlaceId.Value = PlaceId.ToString(); hdPlaceLat.Value = pl.Latitude.ToString(); hdPlaceLon.Value = pl.Longitude.ToString(); hdPlaceTitle.Value = pl.Name; lblPlaceTitle.Text = pl.Name; } protected void btnHere_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; string WhatsH = txtImHere.Text; long PlaceId = Convert.ToInt64(ddlPlace.SelectedValue); double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsH, dLatitude, dLongitude); } protected void btnLocalCoupons_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); } protected void lbBusiness_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; GridViewRow gvr = (GridViewRow)(((LinkButton)sender).Parent.Parent); HiddenField hd = (HiddenField)gvr.FindControl("hdPlaceId"); string sPlaceId = hd.Value; Int64 PlaceId; if (!String.IsNullOrEmpty(sPlaceId)) { PlaceId = Convert.ToInt64(sPlaceId); } } protected void lbLocalDeals_Click(object sender, EventArgs e) { double dLatitude = Convert.ToDouble(Latitude.Value); double dLongitude = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); pnlCoupons.Visible = true; pnlStart.Visible = false; List<GeoPromotion> lgp = da.NearByDeals(dLatitude, dLongitude); lvCoupons.DataSource = lgp; lvCoupons.DataBind(); } protected void lbLocalPlaces_Click(object sender, EventArgs e) { DataAccess da = new DataAccess(); double Lat = Convert.ToDouble(Latitude.Value); double Lon = Convert.ToDouble(Longitude.Value); List<LocationDataModel.Place> places = da.NearByLocations(Lat, Lon); lvPlaces.DataSource = places; lvPlaces.SelectedIndex = -1; lvPlaces.DataBind(); pnlPlaces.Visible = true; pnlStart.Visible = false; } protected void ReturnFromPlaces_Click(object sender, EventArgs e) { pnlPlaces.Visible = false; pnlStart.Visible = true; } protected void ReturnFromDeals_Click(object sender, EventArgs e) { pnlCoupons.Visible = false; pnlStart.Visible = true; } protected void btnImHereNow_Click(object sender, EventArgs e) { long PlaceId = Convert.ToInt32(hdPlaceId.Value); string UserName = Membership.GetUser().UserName; string WhatsHappening = txtWhatsHappening.Text; double UserLat = Convert.ToDouble(Latitude.Value); double UserLon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); da.StoreUserAT(UserName, PlaceId, WhatsHappening, UserLat, UserLon); } protected void lbImHereNowReturn_Click(object sender, EventArgs e) { pnlImHereNow.Visible = false; pnlPlaces.Visible = true; } protected void lbBackToBeginning_Click(object sender, EventArgs e) { pnlStart.Visible = true; pnlImHereNow.Visible = false; } protected void lbWhereIveBeen_Click(object sender, EventArgs e) { string UserName = Membership.GetUser().UserName; pnlStart.Visible = false; pnlIveBeenHere.Visible = true; DataAccess da = new DataAccess(); lvWhereIveBeen.DataSource = da.UserATs(UserName, 0, 15); lvWhereIveBeen.DataBind(); } protected void lbIveBeenHereBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = false; pnlStart.Visible = true; } protected void lbPlaceIveBeen_Click(object sender, EventArgs e) { LinkButton lb = (LinkButton)sender; ListViewItem lvi = (ListViewItem)lb.Parent.Parent; HiddenField hdATID = (HiddenField)lvi.FindControl("hdATID"); Int64 ATID = Convert.ToInt64(hdATID.Value); DataAccess da = new DataAccess(); pnlIveBeenHere.Visible = false; pnlPlaceIveBeen.Visible = true; var plac = da.GetPlaceViaATID(ATID); hdPlaceIveBeenPlaceId.Value = plac.PlaceId.ToString(); hdPlaceIveBeenLatitude.Value = plac.Latitude.ToString(); hdPlaceIveBeenLongitude.Value = plac.Longitude.ToString(); lblPlaceIveBeenName.Text = plac.Name; lblPlaceIveBeenAddress.Text = plac.Address1; lblPlaceIveBeenCity.Text = plac.City; lblPlaceIveBeenState.Text = plac.Province.ProvinceName; lblPlaceIveBeenZipCode.Text = plac.ZipCode; lblPlaceIveBeenCountry.Text = plac.Country.Name; } protected void lbNotListed_Click(object sender, EventArgs e) { SetupAddPoint(); pnlPlaces.Visible = false; } protected void lbAddAPlace_Click(object sender, EventArgs e) { SetupAddPoint(); } private void SetupAddPoint() { double lat = Convert.ToDouble(Latitude.Value); double lon = Convert.ToDouble(Longitude.Value); DataAccess da = new DataAccess(); var zip = da.WhereAmIAt(lat, lon); if (zip.Count > 0) { var z0 = zip[0]; txtCity.Text = z0.City; txtZipCode.Text = z0.ZipCode; ddlProvince.ClearSelection(); if (z0.ProvinceId.HasValue == true) { foreach (ListItem li in ddlProvince.Items) { if (li.Value == z0.ProvinceId.Value.ToString()) { li.Selected = true; break; } } } } pnlAddPlace.Visible = true; pnlStart.Visible = false; } protected void lbAddPlaceReturn_Click(object sender, EventArgs e) { pnlAddPlace.Visible = false; pnlStart.Visible = true; liPlaceAddMessage.Visible = false; PlaceAddMessage.Text = String.Empty; } protected void lbPlaceIveBeenBack_Click(object sender, EventArgs e) { pnlIveBeenHere.Visible = true; pnlPlaceIveBeen.Visible = false; } protected void lbPlaceIveBeenBeginning_Click(object sender, EventArgs e) { pnlPlaceIveBeen.Visible = false; pnlStart.Visible = true; } protected string DisplayName(object val) { string strVal = Convert.ToString(val); if (AppleIPhone.IsIPad()) { ipd = iPhoneDevice.iPad; } if (AppleIPhone.IsIPhone()) { ipd = iPhoneDevice.iPhone; } if (AppleIPhone.IsIPodTouch()) { ipd = iPhoneDevice.iPodTouch; } return (iPhoneHelper.DisplayContentOnMenu(strVal, ipd)); }} iPhoneHelper.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; public enum iPhoneDevice{ iPhone, iPodTouch, iPad}/// <summary>/// Summary description for iPhoneHelper/// </summary>/// public class iPhoneHelper{ public iPhoneHelper() { // // TODO: Add constructor logic here // } // This code is stupid in retrospect. Use css to solve this problem public static string DisplayContentOnMenu(string val, iPhoneDevice ipd) { string Return = val; string Elipsis = "..."; int iPadMaxLength = 30; int iPhoneMaxLength = 15; if (ipd == iPhoneDevice.iPad) { if (Return.Length > iPadMaxLength) { Return = Return.Substring(0, iPadMaxLength - Elipsis.Length) + Elipsis; } } else { if (Return.Length > iPhoneMaxLength) { Return = Return.Substring(0, iPhoneMaxLength - Elipsis.Length) + Elipsis; } } return (Return); }} Source code for the ViewStatePage: using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls; /// <summary>/// Summary description for BasePage/// </summary>#region Base class for a page.public class ViewStatePage : System.Web.UI.Page{ PageStatePersisterToDatabase myPageStatePersister; public ViewStatePage() : base() { myPageStatePersister = new PageStatePersisterToDatabase(this); } protected override PageStatePersister PageStatePersister { get { return myPageStatePersister; } } }#endregion #region This class will override the page persistence to store page state in a database.public class PageStatePersisterToDatabase : PageStatePersister{ private string ViewStateKeyField = "__VIEWSTATE_KEY"; private string _exNoConnectionStringFound = "No Database Configuration information is in the web.config."; public PageStatePersisterToDatabase(Page page) : base(page) { } public override void Load() { // Get the cache key from the web form data System.Int64 key = Convert.ToInt64(Page.Request.Params[ViewStateKeyField]); Pair state = this.LoadState(key); // Abort if cache object is not of type Pair if (state == null) throw new ApplicationException("Missing valid " + ViewStateKeyField); // Set view state and control state ViewState = state.First; ControlState = state.Second; } public override void Save() { // No processing needed if no states available if (ViewState == null && ControlState != null) return; System.Int64 key; IStateFormatter formatter = this.StateFormatter; Pair statePair = new Pair(ViewState, ControlState); // Serialize the statePair object to a string. string serializedState = formatter.Serialize(statePair); // Save the ViewState and get a unique identifier back. key = SaveState(serializedState); // Register hidden field to store cache key in // Page.ClientScript does not work properly with Atlas. //Page.ClientScript.RegisterHiddenField(ViewStateKeyField, key.ToString()); ScriptManager.RegisterHiddenField(this.Page, ViewStateKeyField, key.ToString()); } private System.Int64 SaveState(string PageState) { System.Int64 i64Key = 0; string strConn = String.Empty, strProvider = String.Empty; string strSql = "insert into tblPageState ( SerializedState ) values ( '" + SqlEscape(PageState) + "');select scope_identity();"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); i64Key = Convert.ToInt64(sqlCm.ExecuteScalar()); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return i64Key; } private Pair LoadState(System.Int64 iKey) { string strConn = String.Empty, strProvider = String.Empty, SerializedState = String.Empty, strMinutesInPast = GetMinutesInPastToDelete(); Pair PageState; string strSql = "select SerializedState from tblPageState where tblPageStateID=" + iKey.ToString() + ";" + "delete from tblPageState where DateUpdated<DateAdd(mi, " + strMinutesInPast + ", getdate());"; SqlConnection sqlCn; SqlCommand sqlCm; try { GetDBConnectionString(ref strConn, ref strProvider); sqlCn = new SqlConnection(strConn); sqlCm = new SqlCommand(strSql, sqlCn); sqlCn.Open(); SerializedState = Convert.ToString(sqlCm.ExecuteScalar()); IStateFormatter formatter = this.StateFormatter; if ((null == SerializedState) || (String.Empty == SerializedState)) { throw (new ApplicationException("No ViewState records were returned.")); } // Deserilize returns the Pair object that is serialized in // the Save method. PageState = (Pair)formatter.Deserialize(SerializedState); if (sqlCn.State != ConnectionState.Closed) { sqlCn.Close(); } sqlCn.Dispose(); sqlCm.Dispose(); } finally { sqlCn = null; sqlCm = null; } return PageState; } private string SqlEscape(string Val) { string ReturnVal = String.Empty; if (null != Val) { ReturnVal = Val.Replace("'", "''"); } return (ReturnVal); } private void GetDBConnectionString(ref string ConnectionStringValue, ref string ProviderNameValue) { if (System.Configuration.ConfigurationManager.ConnectionStrings.Count > 0) { ConnectionStringValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString; ProviderNameValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ProviderName; } else { throw new ConfigurationErrorsException(_exNoConnectionStringFound); } } private string GetMinutesInPastToDelete() { string strReturn = "-60"; if (null != System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"]) { strReturn = System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"].ToString(); } return (strReturn); }}#endregion AppleiPhone.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; /// <summary>/// Summary description for AppleIPhone/// </summary>public class AppleIPhone{ public AppleIPhone() { // // TODO: Add constructor logic here // } static public bool IsIPhoneOS() { return (IsIPad() || IsIPhone() || IsIPodTouch()); } static public bool IsIPhone() { return IsTest("iPhone"); } static public bool IsIPodTouch() { return IsTest("iPod"); } static public bool IsIPad() { return IsTest("iPad"); } static private bool IsTest(string Agent) { bool bl = false; string ua = HttpContext.Current.Request.UserAgent.ToLower(); try { bl = ua.Contains(Agent.ToLower()); } catch { } return (bl); }} Master page .cs: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls; public partial class MasterPages_iPhoneMaster : System.Web.UI.MasterPage{ protected void Page_Load(object sender, EventArgs e) { HtmlHead head = Page.Header; HtmlMeta meta = new HtmlMeta(); if (AppleIPhone.IsIPad() == true) { meta.Content = "width=400,user-scalable=no"; head.Controls.Add(meta); } else { meta.Content = "width=device-width, user-scalable=no"; meta.Attributes.Add("name", "viewport"); } meta.Attributes.Add("name", "viewport"); head.Controls.Add(meta); HtmlLink cssLink = new HtmlLink(); HtmlGenericControl script = new HtmlGenericControl("script"); script.Attributes.Add("type", "text/javascript"); script.Attributes.Add("src", ResolveUrl("~/Scripts/iWebKit/javascript/functions.js")); head.Controls.Add(script); cssLink.Attributes.Add("rel", "stylesheet"); cssLink.Attributes.Add("href", ResolveUrl("~/Scripts/iWebKit/css/style.css") ); cssLink.Attributes.Add("type", "text/css"); head.Controls.Add(cssLink); HtmlGenericControl jsLink = new HtmlGenericControl("script"); //jsLink.Attributes.Add("type", "text/javascript"); //jsLink.Attributes.Add("src", ResolveUrl("~/Scripts/jquery-1.4.1.min.js") ); //head.Controls.Add(jsLink); HtmlLink appleIcon = new HtmlLink(); appleIcon.Attributes.Add("rel", "apple-touch-icon"); appleIcon.Attributes.Add("href", ResolveUrl("~/apple-touch-icon.png")); HtmlMeta appleMobileWebAppStatusBarStyle = new HtmlMeta(); appleMobileWebAppStatusBarStyle.Attributes.Add("name", "apple-mobile-web-app-status-bar-style"); appleMobileWebAppStatusBarStyle.Attributes.Add("content", "black"); head.Controls.Add(appleMobileWebAppStatusBarStyle); } internal string FindPath(string Location) { string Url = Server.MapPath(Location); return (Url); }}

Read the article

WCF REST on .Net 4.0

- by AngelEyes

A simple and straight forward article taken from: http://christopherdeweese.com/blog2/post/drop-the-soap-wcf-rest-and-pretty-uris-in-net-4 Drop the Soap: WCF, REST, and Pretty URIs in .NET 4 Years ago I was working in libraries when the Web 2.0 revolution began. One of the things that caught my attention about early start-ups using the AJAX/REST/Web 2.0 model was how nice the URIs were for their applications. Those were my first impressions of REST; pretty URIs. Turns out there is a little more to it than that. REST is an architectural style that focuses on resources and structured ways to access those resources via the web. REST evolved as an “anti-SOAP” movement, driven by developers who did not want to deal with all the complexity SOAP introduces (which is al lot when you don’t have frameworks hiding it all). One of the biggest benefits to REST is that browsers can talk to rest services directly because REST works using URIs, QueryStrings, Cookies, SSL, and all those HTTP verbs that we don’t have to think about anymore. If you are familiar with ASP.NET MVC then you have been exposed to rest at some level. MVC is relies heavily on routing to generate consistent and clean URIs. REST for WCF gives you the same type of feel for your services. Let’s dive in. WCF REST in .NET 3.5 SP1 and .NET 4 This post will cover WCF REST in .NET 4 which drew heavily from the REST Starter Kit and community feedback. There is basic REST support in .NET 3.5 SP1 and you can also grab the REST Starter Kit to enable some of the features you’ll find in .NET 4. This post will cover REST in .NET 4 and Visual Studio 2010. Getting Started To get started we’ll create a basic WCF Rest Service Application using the new on-line templates option in VS 2010: When you first install a template you are prompted with this dialog: Dude Where’s my .Svc File? The WCF REST template shows us the new way we can simply build services. Before we talk about what’s there, let’s look at what is not there: The .Svc File An Interface Contract Dozens of lines of configuration that you have to change to make your service work REST in .NET 4 is greatly simplified and leverages the Web Routing capabilities used in ASP.NET MVC and other parts of the web frameworks. With REST in .NET 4 you use a global.asax to set the route to your service using the new ServiceRoute class. From there, the WCF runtime handles dispatching service calls to the methods based on the Uri Templates. global.asax using System; using System.ServiceModel.Activation; using System.Web; using System.Web.Routing; namespace Blog.WcfRest.TimeService { public class Global : HttpApplication { void Application_Start(object sender, EventArgs e) { RegisterRoutes(); } private static void RegisterRoutes() { RouteTable.Routes.Add(new ServiceRoute("TimeService", new WebServiceHostFactory(), typeof(TimeService))); } } } The web.config contains some new structures to support a configuration free deployment. Note that this is the default config generated with the template. I did not make any changes to web.config. web.config <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </modules> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/> <standardEndpoints> <webHttpEndpoint>  <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> </configuration> Building the Time Service We’ll create a simple “TimeService” that will return the current time. Let’s start with the following code: using System; using System.ServiceModel; using System.ServiceModel.Activation; using System.ServiceModel.Web; namespace Blog.WcfRest.TimeService { [ServiceContract] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] public class TimeService { [WebGet(UriTemplate = "CurrentTime")] public string CurrentTime() { return DateTime.Now.ToString(); } } } The endpoint for this service will be http://[machinename]:[port]/TimeService. To get the current time http://[machinename]:[port]/TimeService/CurrentTime will do the trick. The Results Are In Remember That Route In global.asax? Turns out it is pretty important. When you set the route name, that defines the resource name starting after the host portion of the Uri. Help Pages in WCF 4 Another feature that came from the starter kit are the help pages. To access the help pages simply append Help to the end of the service’s base Uri. Dropping the Soap Having dabbled with REST in the past and after using Soap for the last few years, the WCF 4 REST support is certainly refreshing. I’m currently working on some REST implementations in .NET 3.5 and VS 2008 and am looking forward to working on REST in .NET 4 and VS 2010.

Read the article

CodePlex Daily Summary for Sunday, March 07, 2010

CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

Read the article

Getting the innermost .NET Exception

- by Rick Strahl

Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) { List<Exception> exceptions = new List<Exception>(); exceptions.Add(ex); Exception currentEx = ex; while (currentEx.InnerException != null) { exceptions.Add(ex); } // Reverse the order to the innermost is first exceptions.Reverse(); return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp .NET

Read the article

Integrate BING API for Search inside ASP.Net web application

- by sreejukg

As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

Read the article

JavaScript Intellisense Improvements with VS 2010

- by ScottGu

This is the twentieth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s blog post covers some of the nice improvements coming with JavaScript intellisense with VS 2010 and the free Visual Web Developer 2010 Express. You’ll find with VS 2010 that JavaScript Intellisense loads much faster for large script files and with large libraries, and that it now provides statement completion support for more advanced scenarios compared to previous versions of Visual Studio. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Improved JavaScript Intellisense Providing Intellisense for a dynamic language like JavaScript is more involved than doing so with a statically typed language like VB or C#. Correctly inferring the shape and structure of variables, methods, etc is pretty much impossible without pseudo-executing the actual code itself – since JavaScript as a language is flexible enough to dynamically modify and morph these things at runtime. VS 2010’s JavaScript code editor now has the smarts to perform this type of pseudo-code execution as you type – which is how its intellisense completion is kept accurate and complete. Below is a simple walkthrough that shows off how rich and flexible it is with the final release. Scenario 1: Basic Type Inference When you declare a variable in JavaScript you do not have to declare its type. Instead, the type of the variable is based on the value assigned to it. Because VS 2010 pseudo-executes the code within the editor, it can dynamically infer the type of a variable, and provide the appropriate code intellisense based on the value assigned to a variable. For example, notice below how VS 2010 provides statement completion for a string (because we assigned a string to the “foo” variable): If we later assign a numeric value to “foo” the statement completion (after this assignment) automatically changes to provide intellisense for a number: Scenario 2: Intellisense When Manipulating Browser Objects It is pretty common with JavaScript to manipulate the DOM of a page, as well as work against browser objects available on the client. Previous versions of Visual Studio would provide JavaScript statement completion against the standard browser objects – but didn’t provide much help with more advanced scenarios (like creating dynamic variables and methods). VS 2010’s pseudo-execution of code within the editor now allows us to provide rich intellisense for a much broader set of scenarios. For example, below we are using the browser’s window object to create a global variable named “bar”. Notice how we can now get intellisense (with correct type inference for a string) with VS 2010 when we later try and use it: When we assign the “bar” variable as a number (instead of as a string) the VS 2010 intellisense engine correctly infers its type and modifies statement completion appropriately to be that of a number instead: Scenario 3: Showing Off Because VS 2010 is psudo-executing code within the editor, it is able to handle a bunch of scenarios (both practical and wacky) that you throw at it – and is still able to provide accurate type inference and intellisense. For example, below we are using a for-loop and the browser’s window object to dynamically create and name multiple dynamic variables (bar1, bar2, bar3…bar9). Notice how the editor’s intellisense engine identifies and provides statement completion for them: Because variables added via the browser’s window object are also global variables – they also now show up in the global variable intellisense drop-down as well: Better yet – type inference is still fully supported. So if we assign a string to a dynamically named variable we will get type inference for a string. If we assign a number we’ll get type inference for a number. Just for fun (and to show off!) we could adjust our for-loop to assign a string for even numbered variables (bar2, bar4, bar6, etc) and assign a number for odd numbered variables (bar1, bar3, bar5, etc): Notice above how we get statement completion for a string for the “bar2” variable. Notice below how for “bar1” we get statement completion for a number: This isn’t just a cool pet trick While the above example is a bit contrived, the approach of dynamically creating variables, methods and event handlers on the fly is pretty common with many Javascript libraries. Many of the more popular libraries use these techniques to keep the size of script library downloads as small as possible. VS 2010’s support for parsing and pseudo-executing libraries that use these techniques ensures that you get better code Intellisense out of the box when programming against them. Summary Visual Studio 2010 (and the free Visual Web Developer 2010 Express) now provide much richer JavaScript intellisense support. This support works with pretty much all popular JavaScript libraries. It should help provide a much better development experience when coding client-side JavaScript and enabling AJAX scenarios within your ASP.NET applications. Hope this helps, Scott P.S. You can read my previous blog post on VS 2008’s JavaScript Intellisense to learn more about our previous JavaScript intellisense (and some of the scenarios it supported). VS 2010 obviously supports all of the scenarios previously enabled with VS 2008.

Read the article

The Year 2010, The Year of Change

As I look back on the year of 2010, I could have never predicted the wonderful changes that have occurred for my wife and me. The beginning of this year started out as the 9th year that we lived in South Florida, and my fourth year working for DentalPlans.com as a software engineer/network admin. About 3 months in to the year I was given an excellent opportunity to work for MovieTickets.com in the software engineering department. This opportunity allowed me to gain experience with jQuery due to one of my projects was to reengineering MovieTickets.com existing Marketing Panel System. About 3 months after working at MovieTickets.com, my wife and I were offered an opportunity of a life time. I was offered a Job in a large background\information security company located in Nashville, TN as software engineer II. I must note that after living in South Florida for 9 years, my wife and I really had a strong distaste for the South Florida life style and the general attitude/culture of the area. Even though we shared a strong dislike for the area in which we lived I must admit that it was a tough decision to leave MovieTickets.com because I was really doing well and I made some great new friends like Chris Catto, and Tyson Nero. In fact, they introduced me to Local Microsoft User Groups, and software development podcast like DotNetRocks.com and Hanselminutes.com. In addition, we also went to my first Microsoft launch down in Miami for Visual Studios 2010. I must admit it was a cool experience. I truly hope to keep in touch with them to see how their careers grow, and I know they will. I must admit I was nervous and excited to start the next chapter in our live as I started up the 26 foot U-Haul truck and got on the road for Nashville from Boca Raton. I knew that the change was going to lead to new adventures and new opportunities that I could never imagine. As we pulled in to the long driveway of our rental house, we knew that this was the right place for my wife and I. Natalie, my wife had actually come up to Nashville and within one week of my job offer had set up a nice rental home for us to restart our lives in TN. I must admit that the wonderful southern hospitality took a bit to get use to due to the type of people we were used to dealing with on a regular basis. Our first 2 months seemed like we were living a dream because of our new area and the wonderful people we live around. So far my new job is going really well and I really like the people on my team and department. In fact after 6 months I am now in charge of all application builds for our new deployment process. I am also leading up a push for setting up of continuous integration within our new build process. In addition to starting my new job, I was also offered a position as an adjust instructor at ITT Tech teaching course like VB.net, Java Script, Ajax, and database development. So far I have really like teaching at the college level. Information technology has really been great for my life so I am really glad to be able to give back. That is actually why I started DotNetBlocks. This site allows me to document things I have learned as I work with technology, and allows others to borrow from my experiences. I hope that this site can help others as others have helped me get where I am. Finally, I am glade to report that I only have 4 classes left for my master’s degree at Capella University. I am proud to announce that I am still on track to graduate with 3.91 GPA. This last class was really a test because I had a crazy idea that I could work full time as a software engineer, teach two college courses as a first time teacher and also take an advanced masters class in application architecture. I have no idea how I actually survived, but I am really surprised how well I actually did. I was invited back to reach again at ITT Tech, and I passed my masters class with an “A”. I have decided to take this next term off from my master’s program so that I do not get burned out. Also, so that my new current employer will pay for more of my education, tuition reimbursement is an awesome benefit. This was my year 2010, how was yours?

Read the article

ASP.NET Web API and Simple Value Parameters from POSTed data

- by Rick Strahl

In testing out various features of Web API I've found a few oddities in the way that the serialization is handled. These are probably not super common but they may throw you for a loop. Here's what I found. Simple Parameters from Xml or JSON Content Web API makes it very easy to create action methods that accept parameters that are automatically parsed from XML or JSON request bodies. For example, you can send a JavaScript JSON object to the server and Web API happily deserializes it for you. This works just fine:public string ReturnAlbumInfo(Album album) { return album.AlbumName + " (" + album.YearReleased.ToString() + ")"; } However, if you have methods that accept simple parameter types like strings, dates, number etc., those methods don't receive their parameters from XML or JSON body by default and you may end up with failures. Take the following two very simple methods:public string ReturnString(string message) { return message; } public HttpResponseMessage ReturnDateTime(DateTime time) { return Request.CreateResponse<DateTime>(HttpStatusCode.OK, time); } The first one accepts a string and if called with a JSON string from the client like this:var client = new HttpClient(); var result = client.PostAsJsonAsync<string>(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, "Hello World").Result; which results in a trace like this: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 13Expect: 100-continueConnection: Keep-Alive "Hello World" produces… wait for it: null. Sending a date in the same fashion:var client = new HttpClient(); var result = client.PostAsJsonAsync<DateTime>(http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime, new DateTime(2012, 1, 1)).Result; results in this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 30Expect: 100-continueConnection: Keep-Alive "\/Date(1325412000000-1000)\/" (yes still the ugly MS AJAX date, yuk! This will supposedly change by RTM with Json.net used for client serialization) produces an error response: The parameters dictionary contains a null entry for parameter 'time' of non-nullable type 'System.DateTime' for method 'System.Net.Http.HttpResponseMessage ReturnDateTime(System.DateTime)' in 'AspNetWebApi.Controllers.AlbumApiController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Basically any simple parameters are not parsed properly resulting in null being sent to the method. For the string the call doesn't fail, but for the non-nullable date it produces an error because the method can't handle a null value. This behavior is a bit unexpected to say the least, but there's a simple solution to make this work using an explicit [FromBody] attribute:public string ReturnString([FromBody] string message) andpublic HttpResponseMessage ReturnDateTime([FromBody] DateTime time) which explicitly instructs Web API to read the value from the body. UrlEncoded Form Variable Parsing Another similar issue I ran into is with POST Form Variable binding. Web API can retrieve parameters from the QueryString and Route Values but it doesn't explicitly map parameters from POST values either. Taking our same ReturnString function from earlier and posting a message POST variable like this:var formVars = new Dictionary<string,string>(); formVars.Add("message", "Some Value"); var content = new FormUrlEncodedContent(formVars); var client = new HttpClient(); var result = client.PostAsync(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, content).Result; which produces this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/x-www-form-urlencodedHost: rasxpsContent-Length: 18Expect: 100-continue message=Some+Value When calling ReturnString:public string ReturnString(string message) { return message; } unfortunately it does not map the message value to the message parameter. This sort of mapping unfortunately is not available in Web API. Web API does support binding to form variables but only as part of model binding, which binds object properties to the POST variables. Sending the same message as in the previous example you can use the following code to pick up POST variable data:public string ReturnMessageModel(MessageModel model) { return model.Message; } public class MessageModel { public string Message { get; set; }} Note that the model is bound and the message form variable is mapped to the Message property as would other variables to properties if there were more. This works but it's not very dynamic. There's no real easy way to retrieve form variables (or query string values for that matter) in Web API's Request object as far as I can discern. Well only if you consider this easy:public string ReturnString() { var formData = Request.Content.ReadAsAsync<FormDataCollection>().Result; return formData.Get("message"); } Oddly FormDataCollection does not allow for indexers to work so you have to use the .Get() method which is rather odd. If you're running under IIS/Cassini you can always resort to the old and trusty HttpContext access for request data:public string ReturnString() { return HttpContext.Current.Request.Form["message"]; } which works fine and is easier. It's kind of a bummer that HttpRequestMessage doesn't expose some sort of raw Request object that has access to dynamic data - given that it's meant to serve as a generic REST/HTTP API that seems like a crucial missing piece. I don't see any way to read query string values either. To me personally HttpContext works, since I don't see myself using self-hosted code much.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Exitus Acta Probat: The Post-Processing Module

- by Phil Factor

Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that Unix programmers were excitable creatures who were prone to indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet. They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

Read the article

jQuery with SharePoint solutions

- by KunaalKapoor

For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced. In other words, take into account your world before applying it.Script your deployment options. Folder in SPD. Use the file system. Make external references. The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP). Drop it on the page and it’s there. Easy but dangerousCustom Actions. Great for global deployments of JQuery. Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP. Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity. Any scripts run with the same privileges of the current user. In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM. There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries. Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use. You can add it to your page with a script, put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'> if (typeof jQuery == 'undefined') document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor. You can get past that, “But it looks like SharePoint” Take a long list view and put it into JQuery with pagination, etc and you are the hero. It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem. If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers. Take into account client resourcesHarm the Farm - You need to code wisely and negatively test. Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again. So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake. They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

Read the article

Custom page sizes in paging dropdown in Telerik RadGrid

Working with Telerik RadControls for ASP.NET AJAX is actually quite easy and the initial effort to get started with the control suite is very low. Meaning that you can easily get good result with little time. But there are usually cases where you have to go a little further and dig a little bit deeper than the standard scenarios. In this article I am going to describe how you can customize the default values (10, 20 and 50) of the drop-down list in the paging element of RadGrid. Get control over the displayed page sizes while using numeric paging... The default page sizes are good but not always good enough The paging feature in RadGrid offers you 3, well actually 4, possible page sizes in the drop-down element out-of-the box, which are 10, 20 or 50 items. You can get a fourth option by specifying a value different than the three standards for the PageSize attribute, ie. 35 or 100. The drawback in that case is that it is the initial page size. Certainly, the available choices could be more flexible or even a little bit more intelligent. For example, by taking the total count of records into consideration. There are some interesting scenarios that would justify a customized page size element: A low number of records, like 14 or similar shouldn't provide a page size of 50, A high total count of records (ie: 300+) should offer more choices, ie: 100, 200, 500, or display of all records regardless of number of records I am sure that you might have your own requirements, and I hope that the following source code snippets might be helpful. Wiring the ItemCreated event In order to adjust and manipulate the existing RadComboBox in the paging element we have to handle the OnItemCreated event of RadGrid. Simply specify your code behind method in the attribute of the RadGrid tag, like so: <telerik:RadGrid ID="RadGridLive" runat="server" AllowPaging="true" PageSize="20" AllowSorting="true" AutoGenerateColumns="false" OnNeedDataSource="RadGridLive_NeedDataSource" OnItemDataBound="RadGrid_ItemDataBound" OnItemCreated="RadGrid_ItemCreated"> <ClientSettings EnableRowHoverStyle="true"> <ClientEvents OnRowCreated="RowCreated" OnRowSelected="RowSelected" /> <Resizing AllowColumnResize="True" AllowRowResize="false" ResizeGridOnColumnResize="false" ClipCellContentOnResize="true" EnableRealTimeResize="false" AllowResizeToFit="true" /> <Scrolling AllowScroll="true" ScrollHeight="360px" UseStaticHeaders="true" SaveScrollPosition="true" /> <Selecting AllowRowSelect="true" /> </ClientSettings> <MasterTableView DataKeyNames="AdvertID"> <PagerStyle AlwaysVisible="true" Mode="NextPrevAndNumeric" /> <Columns> <telerik:GridBoundColumn HeaderText="Listing ID" DataField="AdvertID" DataType="System.Int32" SortExpression="AdvertID" UniqueName="AdvertID"> <HeaderStyle Width="66px" /> </telerik:GridBoundColumn>  </Columns> </MasterTableView></telerik:RadGrid> To provide a consistent experience for your visitors it might be helpful to display the page size selection always. This is done by setting the AlwaysVisible attribute of the PagerStyle element to true, like highlighted above. Customize the values of page size Your delegate method for the ItemCreated event should look like this: protected void RadGrid_ItemCreated(object sender, GridItemEventArgs e){ if (e.Item is GridPagerItem) { var dropDown = (RadComboBox)e.Item.FindControl("PageSizeComboBox"); var totalCount = ((GridPagerItem)e.Item).Paging.DataSourceCount; var sizes = new Dictionary<string, string>() { {"10", "10"}, {"20", "20"}, {"50", "50"} }; if (totalCount > 100) { sizes.Add("100", "100"); } if (totalCount > 200) { sizes.Add("200", "200"); } sizes.Add("All", totalCount.ToString()); dropDown.Items.Clear(); foreach (var size in sizes) { var cboItem = new RadComboBoxItem() { Text = size.Key, Value = size.Value }; cboItem.Attributes.Add("ownerTableViewId", e.Item.OwnerTableView.ClientID); dropDown.Items.Add(cboItem); } dropDown.FindItemByValue(e.Item.OwnerTableView.PageSize.ToString()).Selected = true; }} It is important that we explicitly check the event arguments for GridPagerItem as it is the control that contains the PageSizeComboBox control that we want to manipulate. To keep the actual modification and exposure of possible page size values flexible I am filling a Dictionary with the requested 'key/value'-pairs based on the number of total records displayed in the grid. As a final step, ensure that the previously selected value is the active one using the FindItemByValue() method. Of course, there might be different requirements but I hope that the snippet above provide a first insight into customized page size value in Telerik's Grid. The Grid demos describe a more advanced approach to customize the Pager.

Read the article

Kendo Grid: Foreign Key Dropdown does not update grid cell after update

- by JookyDFW

I have a Kendo MVC grid that contains a nullable property (short) that is bound as a foreign key and uses a dropdown list as an editor template. I am also using inline editing. When the property value is null, the dropdown list selected value does not get set into the grid cell after the update button is clicked. This works fine if incell editing is used. I am looking for a workaround that will solve my problem. I am including a stripped down version of my code below Everything works if the nullable value is set to a non-null value. GRID @(Html.Kendo().Grid<AssetViewModel>() .Name("DealAssets") .Columns(c => { c.Bound(x => x.Name); c.ForeignKey(x => x.AssetTypeID, (IEnumerable<SelectListItem>)ViewBag.AssetTypeList, "Value", "Text"); c.ForeignKey(x => x.SeniorityTypeID, seniorityTypeList, "Value", "Text").EditorTemplateName("GridNullableForeignKey"); c.ForeignKey(x => x.RateBaseID, rateBaseList, "Value", "Text").EditorTemplateName("GridNullableForeignKey"); ; c.Command(m => { m.Edit(); m.Destroy(); }); }) .ToolBar(toolbar => toolbar.Create().Text("Add New Asset")) .Editable(x => x.Mode(GridEditMode.InLine)) .DataSource(ds => ds .Ajax() .Model(model => model.Id(request => request.ID)) .Read(read => read.Action("ReadAssets", "Deal", new { id = Model.ID })) .Create(create => create.Action("CreateAsset", "Deal", new { currentDealID = Model.ID })) .Update(update => update.Action("UpdateAsset", "Deal")) .Destroy(destroy => destroy.Action("DeleteAsset", "Deal")) ) ) EDITOR TEMPLATE @model short? @{ var controlName = ViewData.TemplateInfo.GetFullHtmlFieldName(""); } @( Html.Kendo().DropDownListFor(m => m) .Name(controlName) .OptionLabel("- Please select -") .BindTo((SelectList)ViewData[ViewData.TemplateInfo.GetFullHtmlFieldName("") + "_Data"]) ) UPDATE ACTION public ActionResult UpdateAsset([DataSourceRequest] DataSourceRequest request, int ID) { var dealAsset = DataContext.DealAssets.SingleOrDefault(o => o.ID == ID); if (dealAsset != null) { if (TryUpdateModel(dealAsset.Asset, new[] {"Name","AssetTypeID","SeniorityTypeID","RateBaseID" })) { DataContext.SaveChanges(); } } return Json(new[] { new AssetViewModel(dealAsset) }.ToDataSourceResult(request, ModelState), JsonRequestBehavior.AllowGet); }

Read the article

jQuery AutoComplete select firing after change?

- by Zarigani

I'm using the jQuery UI AutoComplete control (just updated to jQuery UI 1.8.1). Whenever the user leaves the text box, I want to set the contents of the text box to a known-good value and set a hidden ID field for the value that was selected. Additionally, I want the page to post back when the contents of the text box are changed. Currently, I am implementing this by having the autocomplete select event set the hidden id and then a change event on the text box which sets the textbox value and, if necessary, causes a post back. If the user just uses the keyboard, this works perfectly. You can type, use the up and down arrows to select a value and then tab to exit. The select event fires, the id is set and then the change event fires and the page posts back. If the user starts typing and then uses the mouse to pick from the autocomplete options though, the change event fires (as focus shifts to the autocomplete menu?) and the page posts back before the select event has a chance to set the ID. Is there a way to get the change event to not fire until after the select event, even when a mouse is used? $(function() { var txtAutoComp_cache = {}; var txtAutoComp_current = { label: $('#txtAutoComp').val(), id: $('#hiddenAutoComp_ID').val() }; $('#txtAutoComp').change(function() { if (this.value == '') { txtAutoComp_current = null; } if (txtAutoComp_current) { this.value = txtAutoComp_current.label ? txtAutoComp_current.label : txtAutoComp_current; $('#hiddenAutoComp_ID').val(txtAutoComp_current.id ? txtAutoComp_current.id : txtAutoComp_current); } else { this.value = ''; $('#hiddenAutoComp_ID').val(''); } // Postback goes here }); $('#txtAutoComp').autocomplete({ source: function(request, response) { var jsonReq = '{ "prefixText": "' + request.term.replace('\\', '\\\\').replace('"', '\\"') + '", "count": 0 }'; if (txtAutoComp_cache.req == jsonReq && txtAutoComp_cache.content) { response(txtAutoComp_cache.content); return; } $.ajax({ url: 'ajaxLookup.asmx/CatLookup', contentType: 'application/json; charset=utf-8', dataType: 'json', data: jsonReq, type: 'POST', success: function(data) { txtAutoComp_cache.req = jsonReq; txtAutoComp_cache.content = data.d; response(data.d); if (data.d && data.d[0]) { txtAutoComp_current = data.d[0]; } } }); }, select: function(event, ui) { if (ui.item) { txtAutoComp_current = ui.item; } $('#hiddenAutoComp_ID').val(ui.item ? ui.item.id : ''); } }); });

Read the article

export to csv using fastercsv and CSV::Writer (Ruby on Rails)

- by Venkat

What am I trying to do: export data to csv. I have a form which allows user to select the format (from a drop down menu). So based on the selection of the format the ouput is displayed using a ajax call. Works fine for html but when I select the format as csv I don't see any pop up on the screen (asking to save or open the file) and neither any file gets downloaded directly. I tried using Fastercsv (but the problem is that I don't see any pop up asking me whether I want to save or open the file) and CSV::Writer where I get this error message on the console. NoMethodError (You have a nil object when you didn't expect it! The error occurred while evaluating nil.bytesize): actionpack (2.3.4) lib/action_controller/streaming.rb:142:in `send_data' Code using Fastercsv: def export_to_csv csv_string = FasterCSV.generate(:col_sep => ",") do |csv| members = ["Versions / Project Members"] members_selected.each {|member| members << Stat.member_name(member)} Stat.project_members(project).each {|user| members << user.name} csv << ["some text", "text 2", "text 3"] end return csv_string end and this is how I am sending the data: send_data(export_to_csv,:type => 'text/csv; charset=iso-8859-1; header=present', :disposition => "attachment", :filename => "filename.csv") I see the response as "some text, text 2, text 3" in the firebug console but no pop up asking whether I want to save or open the file. This is what I am doing using CSV::Writer: def export_to_csv report = StringIO.new CSV::Writer.generate(report, ',') do |csv| csv << ['c1', 'c2'] end end and call it as: send_data(export_to_csv,:type => 'text/csv; charset=iso-8859-1; header=present', :disposition => "attachment", :filename => "filename.csv") This is the error which is thrown on the console: NoMethodError (You have a nil object when you didn't expect it! The error occurred while evaluating nil.bytesize): actionpack (2.3.4) lib/action_controller/streaming.rb:142:in `send_data'

Read the article

Facebook connect displaying invite friends dialog and closing on completion

- by Dougnukem

I'm trying to create a Facebook Connect application that displays a friend invite dialog within the page using Facebook's Javascript API (through a FBMLPopupDialog). The trouble is to display a friend invite dialog you use a multi-friend form which requires an action="url" attribute that represents the URL to redirect your page to when the user completes or skips the form. The problem is that I want to just close the FBMLPopupDialog (the same behavior as if the user just hit the 'X' button on the popup dialog). The best I can do is redirect the user back to the page they were on basically a reload but they lose all AJAX/Flash application state. I'm wondering if any Facebook Connect developers have run into this issue and have a good way to simply display a friend invite "lightbox" dialog within their website where they don't want to "refresh" or "redirect" when the user finishes. The facebook connect JS API provides a FB.Connect.inviteConnectUsers, which provides a nice dialog but only connects existing users of your application who also have a Facebook account and haven't connected. http://bugs.developers.facebook.com/show%5Fbug.cgi?id=4916 function fb_inviteFriends() { //Invite users log("Inviting users..."); FB.Connect.requireSession( function() { //Connect succes var uid = FB.Facebook.apiClient.get_session().uid; log('FB CONNECT SUCCESS: ' + uid); //Invite users log("Inviting users..."); //Update server with connected account updateAccountFacebookUID(); var fbml = fb_getInviteFBML() ; var dialog = new FB.UI. FBMLPopupDialog("Weblings Invite", fbml) ; //dialog.setFBMLContent(fbml); dialog.setContentWidth(650); dialog.setContentHeight(450); dialog.show(); }, //Connect cancelled function() { //User cancelled the connect log("FB Connect cancelled:"); } ); } function fb_getInviteFBML() { var uid = FB.Facebook.apiClient.get_session().uid; var fbml = ""; fbml = '<fb:fbml>\n' + '<fb:request-form\n'+ //Redirect back to this page ' action="'+ document.location +'"\n'+ ' method="POST"\n'+ ' invite="true"\n'+ ' type="Weblings Invite"\n' + ' content="I need your help to discover all the Weblings and save the Internet! WebWars: Weblings is a cool new game where we can collect fantastic creatures while surfing our favorite websites. Come find the missing Weblings with me!'+ //Callback the server with the appropriate Webwars Account URL ' <fb:req-choice url=\''+ WebwarsFB.WebwarsAccountServer +'/SplashPage.aspx?action=ref&reftype=Facebook' label=\'Check out WebWars: Weblings\' />"\n'+ '>\n'+ ' <fb:multi-friend-selector\n'+ ' rows="2"\n'+ ' cols="4"\n'+ ' bypass="Cancel"\n'+ ' showborder="false"\n'+ ' actiontext="Use this form to invite your friends to connect with WebWars: Weblings."/>\n'+ ' </fb:request-form>'+ ' </fb:fbml>'; return fbml; }

Read the article

Concatenate & Minify JS on the fly OR at build time - ASP.NET MVC

- by Charlino

As an extension to this question here Linking JavaScript Libraries in User Controls I was after some examples of how people are concatinating & minifying javascript on the fly OR at build time. I would also like to see how it then works into your master pages. I don't mind page specific files being minified and linked inidividually as they currently are (see below) but all the js files on the main master page (I have about 5 or 6) I would like concatenated and minified. Bonus points for anyone who also incorporates CSS concatenation & minification! :-) Current master page with the common js files that I would like concatenated & minified: <%@ Master Language="C#" Inherits="System.Web.Mvc.ViewMasterPage" %> <head runat="server"> ... BLAH ... <asp:ContentPlaceHolder ID="AdditionalHead" runat="server" /> ... BLAH ... <%= Html.CSSBlock("/styles/site.css") %> <%= Html.CSSBlock("/styles/jquery-ui-1.7.1.css") %> <%= Html.CSSBlock("/styles/jquery.lightbox-0.5.css") %> <%= Html.CSSBlock("/styles/ie6.css", 6) %> <%= Html.CSSBlock("/styles/ie7.css", 7) %> <asp:ContentPlaceHolder ID="AdditionalCSS" runat="server" /> </head> <body> ... BLAH ... <%= Html.JSBlock("/scripts/jquery-1.3.2.js", "/scripts/jquery-1.3.2.min.js") %> <%= Html.JSBlock("/scripts/jquery-ui-1.7.1.js", "/scripts/jquery-ui-1.7.1.min.js") %> <%= Html.JSBlock("/scripts/jquery.validate.js", "/scripts/jquery.validate.min.js") %> <%= Html.JSBlock("/scripts/jquery.lightbox-0.5.js", "/scripts/jquery.lightbox-0.5.min.js") %> <%= Html.JSBlock("/scripts/global.js", "/scripts/global.min.js") %> <asp:ContentPlaceHolder ID="AdditionalJS" runat="server" /> </body> Used in a page like this (which I'm happy with): <asp:Content ID="signUpContent" ContentPlaceHolderID="AdditionalJS" runat="server"> <%= Html.JSBlock("/scripts/pages/account.signup.js", "/scripts/pages/account.signup.min.js") %> </asp:Content> EDIT: What I'm using now Since asking this question, Microsoft have released their own JS & CSS compression library called Microsoft AJAX Minifier, I'd definitely recommend checking it out. It includes MSBuild tasks which are the duck's nuts.

Read the article

Asp.Net MVC EnableClientValidation doesnt work.

- by Farrell

I want as well as Client Side Validation as Server Side Validation. I realized this as the following: Model: ( The model has a DataModel(dbml) which contains the Test class ) namespace MyProject.TestProject { [MetadataType(typeof(TestMetaData))] public partial class Test { } public class TestMetaData { [Required(ErrorMessage="Please enter a name.")] [StringLength(50)] public string Name { get; set; } } } Controller is nothing special. The View: <% Html.EnableClientValidation(); %> <% using (Ajax.BeginForm("Index", "Test", FormMethod.Post, new AjaxOptions {}, new { enctype = "multipart/form-data" })) {%> <%= Html.AntiForgeryToken()%> <fieldset> <legend>Widget Omschrijving</legend> <div> <%= Html.LabelFor(Model => Model.Name) %> <%= Html.TextBoxFor(Model => Model.Name) %> <%= Html.ValidationMessageFor(Model => Model.Name) %> </div> </fieldset> <div> <input type="submit" value="Save" /> </div> <% } %> To make this all work I added also references to js files: <script src="../../Scripts/MicrosoftAjax.js" type="text/javascript"></script> <script src="../../Scripts/MicrosoftMvcAjax.js" type="text/javascript"></script> <script src="../../Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script> Eventually it has to work, but it doesnt work 100%: It does validates with no page refresh after pressing the button. It also does "half" Client Side Validation. Only when you type some text into the textbox and then backspace the typed text. The Client Side Validation appears. But when I try this by tapping between controls there's no Client Side Validation. Do I miss some reference or something? (I use Asp.Net MVC 2 RTM)

Read the article

Stored Procedure call with parameters in ASP.NET MVC

- by cc0

I have a working controller for another stored procedure in the database, but I am trying to test another. When I request the URL; http://host.com/Map?minLat=0&maxLat=50&minLng=0&maxLng=50 I get the following error message, which is understandable but I can't seem to find out why it occurs; Procedure or function 'esp_GetPlacesWithinGeoSpan' expects parameter '@MinLat', which was not supplied. This is the code I am using. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.Web.Mvc.Ajax; using System.Data; using System.Text; using System.Data.SqlClient; namespace prototype.Controllers { public class MapController : Controller { //Initial variable definitions //Array with chars to be used with the Trim() methods char[] lastComma = { ',' }; //Minimum and maximum lat/longs for queries float _minLat; float _maxLat; float _minLng; float _maxLng; //Creates stringbuilder object to store SQL results StringBuilder json = new StringBuilder(); //Defines which SQL-server to connect to, which database, and which user SqlConnection con = new SqlConnection(...connection string here...); // // HTTP-GET: /Map/ public string CallProcedure_getPlaces(float minLat, float maxLat, float minLng, float maxLng) { con.Open(); using (SqlCommand cmd = new SqlCommand("esp_GetPlacesWithinGeoSpan", con)) { cmd.CommandType = CommandType.Text; cmd.Parameters.AddWithValue("@MinLat", _minLat); cmd.Parameters.AddWithValue("@MaxLat", _maxLat); cmd.Parameters.AddWithValue("@MinLng", _minLng); cmd.Parameters.AddWithValue("@MaxLng", _maxLng); using (SqlDataReader reader = cmd.ExecuteReader()) { while (reader.Read()) { json.AppendFormat("\"{0}\":{{\"c\":{1},\"f\":{2}}},", reader["PlaceID"], reader["PlaceName"], reader["SquareID"]); } } con.Close(); } return "{" + json.ToString().TrimEnd(lastComma) + "}"; } //http://host.com/Map?minLat=0&maxLat=50&minLng=0&maxLng=50 public ActionResult Index(float minLat, float maxLat, float minLng, float maxLng) { _minLat = minLat; _maxLat = maxLat; _minLng = minLng; _maxLng = maxLng; return Content(CallProcedure_getPlaces(_minLat, _maxLat, _minLng, _maxLng)); } } } Any help on resolving this problem would be greatly appreciated.

Read the article

ASP.NET MVC 2 JQuery POST not displaying the model state errors

- by Oshan

Hello, I have been using asp.net mvc for a bit (but I'm still a beginer). I want to have the ability to update two views as a result of a jquery postback. Basically I have a list and a details view. The details view is presented using a jquery popup (using jquery-UI popup). I only want to update the list if the details save is successful (i.e. there are no validation errors on the details view). However, if there are any validation errros in the details view, I want to update the details view so that the user sees the validation errors. so I thought in my controller, I return a JsonResult instead of a View. [HttpPost] public ActionResult SavePersonInfo(Person p) { if(ModelState.Valid) { return View("PersonList"); } return Json({Error = true, View = PartialView("PersonDetails", p)}); } As you can see if there are no errors I return the person list view, but if there are any validation errors, I have return the details view. The reason that I'm returning a JsonResult is I need to tell my view there is an error so that the view (jquery) knows which section to update (as in whether to update the person list 'div' or the popup dialog 'div'). So, in my view, the jquery is as follows (please assume that there is a form for entering in the person details and "SubmitPersonForm();" function is called upon clicking on the "Save" button): <script type="text/javascript> $('#btnSave').click(function (event) { onBegin(); $.ajax( { type: "POST", url: "/Person/Save", data: $('form').serialize(), success: function (result) { if(result.Error) { $('#dvDetails').html($(result).View)); } else { $('#dvPersonList').html($result); } } }); }); </script> So the problem that I have now, is that when there is a validation error, I do see the correct, 'div' being updated, but I lose the asp.net mvc validation messages. I do not see any validation errors in red, as if ASP.NET MVC is completely ignored them. However, my ModelState does have those errros, just not displayed in the details view. I do have valication summary and Html.ValidationFor(m = ...) statements put in my details view. Could someone tell me why I'm not seeing the validation errors? although I'm using a JSonResult, I do use the right property which is a valid view when I render the 'dvDetails'. Am I doing something that I'm not suppose to in asp.net mvc? Btw I'm using asp.net mvc2 RC with Visual Studio 2010 RC. Thank you.

Read the article

IIS7 MVC deploy - 404 not found on actions that accept "id" parameter.

- by majkinetor

Hello. Once deployed parts of my web-application stop working. Index-es on each controller do work, and one form posting via Ajax, Login works too. Other then that yields 404. I understand that nothing particular should be done in integrated mode. I don't know how to proceed with troubleshooting. Some info: App is using default app pool set to integrated mode. WebApp is done in net framework 3.5. I use default routing model. Along web.config in root there is web.config in /View folder referencing HttpNotFoundHandler. OS is Windows Server 2008. Admins issued aspnet_regiis.exe -i IIS 7 Any help is appreciated. Thx. EDIT: I determined that only actions that accept ID parameter don't work. On the contrary, when I add dummy id method in Home controller of default MVC app it works. My Views/Web.config <?xml version="1.0"?> <configuration> <system.web> <httpHandlers> <add path="*" verb="*" type="System.Web.HttpNotFoundHandler"/> </httpHandlers>  <pages validateRequest="false" pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <controls> <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" /> </controls> </pages> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <handlers> <remove name="BlockViewHandler"/> <add name="BlockViewHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler"/> </handlers> </system.webServer> </configuration>

Read the article

Apache Commons FileUpload Does not behave like expected

- by Harry Pham

I just want to assure you guys that before I post this, I have read couple of similar post but none solved my problem. So here it is. I use Ajax taglib for my form since it wont refresh my screen <%@ taglib uri="WEB-INF/taglib.tld" prefix="a" %> <a:AjaxUpload action="UploadServlet"> <input type="file"> <input type="submit" value="Upload"> </a:AjaxUpload> If this is in any confused you guys, then you can think of the above code will create these form, but send request asynchronously. <form action="UploadServlet" enctype="multipart/form-data" method="post"> <input type="file"> <input type="submit"> </form> My first question is, if I add name="file" inside the <input> to make it become like this, <input type="file" name="file">, my servlet will throw an exception. It wont if I take it out. Here is the exception: SEVERE: Servlet.service() for servlet UploadServlet threw exception javax.servlet.ServletException: Servlet execution threw an exception at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:313) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:637) My second question is: On the server side, I check the request to see if it is isMultipartContent, and it is. But then when I parseRequest() and store into List<FileItem> items, the items.size() is 0. Here is my Servlet code FileItemFactory factory = new DiskFileItemFactory(); ServletFileUpload upload = new ServletFileUpload(factory); List<FileItem> items = null; if(request.getContentType() != null && request.getContentType().toLowerCase().indexOf("multipart/form-data") > -1){ if(upload.isMultipartContent(request)){ items = upload.parseRequest(request); //It got to here, but items.size is 0. why????????????? } }

Read the article

Have Button re-appear immediately after clicking button in ListView row

- by Soeren

I have 4 buttons on a page. Each button opens a modal window and let’s the user input data in a form. When the user hits the save button in the modal, a ListView appears on the page with the submitted data. The button the user clicked to open the modal window is set to visible=false, so it’s gone when the row is added to the ListView. Now there are 3 buttons and the same goes for those; when the user hits a button, a modal appears, and when the modal form is submitted, the button disappears and a row is added to the ListView. In the ListView row, there is a delete button. When this button is clicked, the row is deleted and the button that was initially clicked to add this row (and open the modal), SHOULD reappear, but it doesn’t. The row disappears, but I have to refresh the page before the button comes back. There is a ScriptManager on the masterpage, so I guess this is an AJAX partial refresh issue. I tried adding different events, but I can’t find the one that fires at the right time. I use an ObjectDataSource to fill the ListView, and the data comes from a database, wrapped in a business object. This code loads a business object in a List< and checks if the user inserted an item of a specific type. If he did, the button he used to open the modal is hidden. This works fine (maybe not the most elegant) _goals = GoalManager.GetGoalsByUser(UserID); if (_goals != null) { foreach (Goal _goalinlist in _goals) { if (_goalinlist.GoalType == 1) { Button1.Visible = false; goalid1 = true; } if (_goalinlist.GoalType == 2) { Button2.Visible = false; goalid2 = true; } if (_goalinlist.GoalType == 3) { Button3.Visible = false; goalid3 = true; } if (_goalinlist.GoalType == 4) { Button4.Visible = false; goalid4 = true; } } } As you can see, I tried setting a boolean, and then check it when the page is re-loaded. But the problem (I guess) is that the whole page isn't refreshed when the delete button is clicked in the ListView. This is the delete button in the ListView: <asp:ImageButton ID="ImageButton2" runat="server" CommandName="Delete" CausesValidation="false" ToolTip="Delete" CommandArgument='<%#Eval("GoalID")%>' ImageUrl="delete.gif" OnClientClick="return confirm('Delete this post?');" CssClass="button"/> I guess the question is, how do I make the button re-appear right after the ListView button is clicked?

Read the article

ASP.NET web forms as ASP.NET MVC

- by lopkiju

I am sorry for possible misleading about the title, but I have no idea for a proper title. Feel free to edit. Anyway, I am using ASP.NET Web Forms, and maybe this isn't how web forms is intended to be used, but I like to construct and populate HTML elements manually. It gives me more control. I don't use DataBinding and that kind of stuff. I use SqlConnection, SqlCommand and SqlDataReader, set SQL string etc. and read the data from the DataReader. Old school if you like. :) I do create WebControls so that I don't have to copy-paste every time I need some control, but mostly, I need WebControls to render as HTML so I can append that HTML into some other function that renders the final output with the control inside. I know I can render a control with control.RenderControl(writer), but this can only be done in (pre)Render or RenderContents overrides. For example. I have a dal.cs file where is stored all static functions and voids that communicate with the database. Functions mostly return string so that it can be appended into some other function to render the final result. The reason I am doing like this is that I want to separate the coding from the HTML as much as I can so that I don't do <% while (dataReader.Read()) % in HTML and display the data. I moved this into a CodeBehind. I also use this functions to render in the HttpHandler for AJAX response. That works perfectly, but when I want to add a control (ASP.NET Server control (.cs extension, not .ascx)) I don't know how to do that, so I see my self writing the same control as function that returns string or another function inside that control that returns string and replaces a job that would RenderContents do, so that I can call that function when I need control to be appended into a another string. I know this may not be a very good practice. As I see all the tutorials/videos about the ASP.NET MVC, I think it suite my needs as with the MVC you have to construct everything (or most of it) by your self, which I am already doing right now with web forms. After this long intro, I want to ask how can I build my controls so I can use them as I mentioned (return string) or I have to forget about server controls and build the controls as functions and used them that way? Is that even possible with ASP.NET Server Controls (.cs extension) or am I right when I said that I am not using it right. To be clear, I am talking about how to properly use a web forms, but to avoid data binders because I want to construct everything by my self (render HTML in Code Behind). Someone might think that I am appending strings like "some " + "string", which I am not. I am using StringBuilder for that so there's no slowness. Every opinion is welcome.

Search Results

Search found 8064 results on 323 pages for 'how to use ajax hoverme'.

Page 308/323 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315 | Next Page >

- by Rolando Cruz

- by Saif Bechan

- by Wallym

- by AngelEyes

- by Rick Strahl

- by sreejukg

- by ScottGu

- by Rick Strahl

- by Phil Factor

- by KunaalKapoor

- by JookyDFW

- by Zarigani

- by Venkat

- by Dougnukem

- by Charlino

- by Farrell

- by cc0

- by Oshan

- by majkinetor

- by Harry Pham

- by Soeren

- by lopkiju

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315 | Next Page >