Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 308/551 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• L2TP and multiple interfaces on the machine

  - by Alex

  We have setup ipsec and l2tp on linux. One question came up (due to firewall management policy) is whether it's possible to have 1 virtual interface instead of one per connected client. Now we have: ppp0 serverip clientip1 ppp1 serverip clientip2 Want to have: l2tp_tun serverip serverip like with OpenVPN's tun interfaces and then to be able to push IP address and route to each client.

  Read the article

• How to access my local server on my VirtualBox virtual machine?

  - by marcgg

  Here's my setup: I have a local server running on my machine (Mac OS, Snow Leopard). I can access it via my browser by doing localhost:3000 I have a virtual machine using Virtual Box running a windows XP. If I try to access using localhost:3000, it fails. Same thing if I use the ip of the Mac machine. The virtual machine has access to the internet. How can I access my local server in my virtual machine?

  Read the article

• How do I set my router up to authenticate with my service provider?

  - by João Lourenço

  Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

  Read the article

• how to have a vm image act as a server host

  - by tipu

  I have a VM Ware player, VMware-player-3.0.1-227600.exe I downloaded a cent os image, it's version is CentOS release 5.4 (Final) I have apache installed and listening on port 8080. However when I visit my ip address, x.x.x.x.:8080/ I don't get the default apache page as I would by going to localhost:8080/ What do I have to do in my image or vmware to get it to serve?

  Read the article

• Confused with DKIM, SPF and Exim Configs

  - by 0pt1m1z3

  I've now spent 2 hours trying to figure out this issue and I am about to give up and go to bed. I've been having issues with Gmail rejecting emails from my VPS server because of false spam alerts (probably caused by lfd sending too many emails). So I changed my Exim config to send emails from a different IP (my VPS comes with 3) and that fixed the issue. I also enabled DKIM and SPF on my domains for added measure. But now, all my emails appear as ("From: Sender Name via server.domain1.com") where server.domain1.com is my VPS hostname. I previously had the same issue in Outlook and turning off "Set SMTP Sender: headers" solved that problem. But I believe adding the DKIM and SPF now makes Gmail add "via server.domain1.com" to my messages. How do I fix this? This is a typical header for a message (as it appears at gmail): Delivered-To: [email protected] Received: by 10.60.44.163 with SMTP id f3csp248622oem; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received: by 10.50.106.200 with SMTP id gw8mr452788igb.10.1333081398523; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Return-Path: <[email protected]> Received: from domain2.com ([X.X.X.X]) by mx.google.com with ESMTPS id y1si810998igb.3.2012.03.29.21.23.18 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) client-ip=X.X.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=server.domain1.com; s=default; h=Date:Message-Id:From:Content-type:MIME-Version:Subject:To; bh=wF8bBRgh01EYg4t5DAeVPv1Ps906UVIeRnQCb/HvSYw=; b=k/Pg7lnrO+Ud/z1mOTv+O/3DiJzzQgyBhfIizIaFHM8tF/eNJt5P2k+9yQB224sxYstZIWwVRBJmiqvcM1QhARv1HWqWma0crppZ3JOn+LRHANan634OBi+58SIRA+gu; Received: (Exim 4.77) id 1SDTVE-0005HA-9Y for [email protected]; Fri, 30 Mar 2012 00:31:56 -0400 To: [email protected] Subject: Password Reset Request MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 From: Sender Name <[email protected]> Message-Id: <[email protected]> Date: Fri, 30 Mar 2012 00:31:56 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - server.domain1.com X-AntiAbuse: Original Domain - domain2.com X-AntiAbuse: Originator/Caller UID/GID - [507 504] / [47 12] X-AntiAbuse: Sender Address Domain - server.domain1.com

  Read the article

• Lotus Notes Access Logs - Where are the Logs found in Domino?

  - by RSXAdmin

  Where are the logs found in Domino? In particular, I am looking for access (login access times and IP address) logs for Lotus Notes web mail. Is it possible to view who logged in to a user's mailbox and when it was done?

  Read the article

• Alternatives to Crashplan for VPS?

  - by Chloe

  I use SFTP Net Drive to mount a remote VPS so I can back it up. However, it's taken over 3+ days to scan! I ran 'ls -lR' from my desktop over the mounted network drive and it only took about 5m to list all the files! There are only about 5000 files and 2 GB. I know Crashplan can run headless on the VPS itself, but that sounds like a pain to set up, and it takes so much memory on the server. The VPS doesn't have a lot of memory to spare - it's less than my desktop. Is there another program that can communicate with a Crashplan backup protocol and has a command line interface? backup /home

  Read the article

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• DNS server setting resets on reboot

  - by Vaibhav Bajpai

  I recently changed my physical location, and had to change my DNS server setting in network preferences. However my Mac reverts back to original DNS server IP address on each reboot and I have to manually change it everytime. How can I make my changes persist on reboot? I am running Snow Leopard 10.6.7 UPDATE This is has started to occur since the time I restored my entire system from TM backup.

  Read the article

• Why does ifconfig in freebsd resets default gateway ?

  - by eugene y

  ifconfig in freebsd deletes the default gateway route, even when given the same IP-address (e.g. when updating netmask only). Is it a bug or a feature? As fas as I remember Linux doesn't change the default gateway in this case.

  Read the article

• Linux: Blocking Huge List of IPs?

  - by Miko

  What is the most efficient way to block access to 8-10k IP addresses? My server runs EngineX on Debian. If possible, I would like to show all of the addresses an Internal Server Error (500).

  Read the article

• Routing application traffic through specific interface

  - by UnicornsAndRainbows

  Hello All! First question here, so please go easy: I have a debian linux 5.0 server with two public interfaces. I would like to route outbound traffic from one instance of an application via one interface and the second instance through the second interface. There are some challenges: both instances of the application use the same protocol both instances of the application can access the entire internet (can't route based on dest network) I can't change the code of the application I don't think a typical approach to load balancing all traffic is going to work well, because there are relatively few destination servers being accessed in the outbound traffic, and all traffic would really need to be distributed pretty evenly across these relatively few servers. I could probably run two virtualized servers on the box and bind each of them to a different external ip, but I'm looking for a simpler solution, maybe using iproute or iptables? Any ideas for me? Thanks in advance - and I'm happy to answer any questions.

  Read the article

• xampp - can access control panel, cannot access projects/sites on local network

  - by Peter O.

  I've configured xampp and firewall so I can access desktop pc's localhost over my local network through desktop pc's IP. But I'm not able to access auctual projects: I can access: http://192.168.x.x/xampp or http://192.168.x.x/phpMyAdmin But I cannot access: http://192.168.x.x/myWebsite/ I get an error: Server error We're sorry! The server encountered an internal error and was unable to complete your request. Please try again later. error 500

  Read the article

• GMail detecting mail as spam

  - by Petru Toader

  I've been trying for a long time to get our company's mail server send mail that will get accepted by the GMail spam filter. I have managed making it work for Yahoo Mail and Hotmail, sadly GMail is still marking our mails as spam. I have configured DKIM, SPF, DMARC and verified our mail server IP address against blacklists. I also have pasted here the headers GMail gets when we send a mail. Delivered-To: [email protected] Received: by 10.42.215.6 with SMTP id hc6csp107427icb; Wed, 20 Aug 2014 07:34:26 -0700 (PDT) X-Received: by 10.194.100.34 with SMTP id ev2mr59101019wjb.76.1408545265402; Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.phyramid.com (mail.phyramid.com. [178.157.82.23]) by mx.google.com with ESMTPS id dj10si4827754wib.79.2014.08.20.07.34.24 for <[email protected]> (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) client-ip=178.157.82.23; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) [email protected]; dkim=pass [email protected] Received: from localhost (localhost [127.0.0.1]) by mail.phyramid.com (Postfix) with ESMTP id ED2BB2017AC for <[email protected]>; Wed, 20 Aug 2014 17:33:23 +0300 (EEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=phyramid.com; h= content-type:content-type:mime-version:x-mailer:subject:subject :message-id:to:from:from:date:date; s=dkim; t=1408545197; x= 1409409197; bh=e04RtoyF7G39lfCvA9LLhTz4nF64siZtN5IYmC18Xsc=; b=o +6mO8Uz4Uf1G4U2q6tKUiEy2N2n/5R2VtPPwIvBE5xzK/hEd2sDGMxVzQVgIDCsK Q0Xh+auPaQpxldQ+AEcL2XSZMrk/g0mJONjkpI19I5AwGIJCR1SVvxdecohTn9iR bCHzrGi2wAicfDBzOH6lUBNfh2thri79aubdCYc97U= X-Amavis-Modified: Mail body modified (using disclaimer) - mail.phyramid.com X-Virus-Scanned: Debian amavisd-new at mail.phyramid.com Received: from mail.phyramid.com ([127.0.0.1]) by localhost (mail.phyramid.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 3JcgXZAXeFtX for <[email protected]>; Wed, 20 Aug 2014 17:33:17 +0300 (EEST) Received: from whiterock.local (unknown [109.98.21.30]) by mail.phyramid.com (Postfix) with ESMTPSA id 05CAE200280 for <[email protected]>; Wed, 20 Aug 2014 17:33:15 +0300 (EEST) Date: Wed, 20 Aug 2014 17:34:15 +0300 From: Company Mail <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: hey there! X-Mailer: Airmail (247) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline How was your summer? ---- Thanks a lot!

  Read the article

• How to enable Jetty to support cometd/reverse ajax while let it listen to port 80?

  - by janetsmith

  I would like to use cometd / reverse ajax capability of Jetty 7. I tried to configure it so it listen to port 80, instead of 8080. However, according to http://jetty.mortbay.org/jetty5/faq/faq%5Fs%5F200-General%5Ft%5Fapache.html , Apache can be configured as a HTTP/1.1 proxy to pass selected request to the Jetty using the HTTP/1.1 protocol. This is simple to configure and use, but current versions of the apache mod_proxy do not support persistent connections. As far as I know, the reverse ajax in jetty is depending on continuation (I guess it is persistent connection). So how to let jetty support reverse ajax, while coexist with apache server? Thanks.

  Read the article

• Recommended method for routing www to zone apex (naked domain) using AWS Route 53

  - by Dan Christian

  In my AWS Route 53 control panel I simply have 2 A records currently set up for the 'www' and the 'non www' names. Both point to the Elastic IP address associated with my EC2 Instance. This works well and my website is available at both variations but I really want all 'www' to route to the 'non www'. What is the reccomened method, using AWS Route 53, for routing all traffic that comes to... www.example.com to example.com

  Read the article

• Tomcat "connection interrupted" with ssl

  - by Mike Thomsen

  I can access Tomcat on port 8080, but not on 8443. When I try o get there, this is the error I get in Firefox: The connection was interrupted The connection to the.fqdn.com:8443 was interrupted while the page was loading. This is my connector: <Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="want" sslProtocol="TLS" keystoreFile="C:\temp\keystore.jks" keystorePass="changeit"/> I have the CA key in the jre's cacerts file. The server cert was generated using EJBCA and should be signed properly. Any suggestions on what is going on?

  Read the article

• Windows Server 2003 DNS cached lookups modification

  - by Mike

  Hi, Is it possible to modify the entries in the cached lookup? I need to temporarily change the resolution of an IP address of a domain name to something else. I can't wait until DNS updates. Sorry, forgot to mention that the interface of the server has DNS set to itself. DNS server is running.

  Read the article

• Configuring ASP.NET web site in IIS 6.0

  - by Paul Knopf

  I have installed IIS and .NET 4.0 on Windows Server 2003. I have a web ready website that that targets .NET 4.0 and have updated the default website home directory to map to the website's directory. When I visit the website in a web browser (localhost, localhost:80), I get a 404 error (File or directory not found). Here is the IP address so you can see for yourself. http://72.45.244.92/ How do I get my ASP.NET 4.0 website to run?

  Read the article

• Connect android to database

  - by danny

  I am doing a school project where we need to create an android application which needs to connect to a database. the application needs to gain and store information for people's profiles on the database. But unfortunatly we are a little bit stuck at this point because there are numerous ways to link the application such as http request through apache or through the SOAP/REST protocol. But it's really hard to find good instructions or tutorials on the problem since I can't really find them. Maybe that's cause i'm probably using the wrong words on google. Unfortunately I have little relevant information. So if anyone can help me with finding relevant links to good online tutorials or howto's than those are very welcome.

  Read the article

• Windows 7 connect to Lion file sharing

  - by Automaton

  Trying to access my Mac from a Windows 7 computer, I fail with the infamous error 86 incorrect password. Now this appears to be a well-known problem with countless threads on the internet giving as many "solutions" as there are discussion threads about it (mostly ranging from installing third-party commercial samba servers, to switching to some other protocol, to compiling a plain-vanilla Samba installation - the latter which I will probably do when I give up this :) ) I am stubborn, and I believe there must be some problem here that can be solved or worked around, but there is surprisingly little detail about this problem. It appears to have something to do with a mismatch of authentication methods. Trying to run samba in debug mode: sudo /usr/sbin/smbd -debug -stdout gets me this output when trying to access it from Win 7 ... smb1_dispatch_one [smb_dispatch.cpp:377] dispatching SMB_COM_SESSION_SETUP_ANDX smb1_dispatch_session_setup [session_setup.cpp:261] FIXME erase existing sessions log_gss_error [gssapi_mechanism.cpp:97] gssapi: gss-code: Miscellaneous failure (see text) log_gss_error [gssapi_mechanism.cpp:113] gssapi: mech-code: unknown mech-code 22 for mech unknown What is the problem here, and how do I fix it?

  Read the article

• Why can't SVN checkout into a virtualbox shared folder?

  - by Alex Waters

  I am trying to checkout into the virtualbox shared folder with svn 1.7 in ubuntu 12.04 running as a guest on a windows 7 host. I had read that this error was a 1.6 problem, and updated - but am still receiving the error: svn: E000071: Can't move '/mnt/hostShare/code/www/.svn/tmp/svn-hsOG5X' to '/mnt/hostShare/code/www/trunk/statement.aspx?d=201108': Protocol error I found this blog post about the same error in a mac environment, but am finding that changing the folder/file permissions does nothing. vim .svn/entires just has the number 12 - does this need to be changed? Thank you for any assistance! (just another reason for why I prefer git...)

  Read the article

• How to direct outgoing traffic through specific interface?

  - by user1434058

  I added eth1 and eth2 to my Ubuntu Server, all 3 use DHCP and are on the same lan eth0 10.0.0.41 eth1 10.0.0.42 eth3 10.0.0.43 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default router.net 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth1 10.0.0.0 * 255.255.255.0 U 0 0 0 eth2 curl --interface eth1 www.google.com doesn't work what else do i need to do for the above to work?

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >