Search Results

Search found 46813 results on 1873 pages for 'system shutdown'.

Page 309/1873 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

  • WOL for Asus M5A97 built in Realtek Network Adapter

    - by madphp
    I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

    Read the article

  • Windows Updates - Does Not Install, how can I remove it

    - by Kanini
    Everytime I shutdown my Windows XP, it comes up with the following screen which says "Turn Off with Installing Updates" (Of course, it also gives me an option as follows, "Click here to turn off without installing updates.") Now, when I do normal shutdown asking it to Install Updates and Turn it Off. It does not install the updates and every subsequent time I try to shut down the PC, it still comes with the prompt "Turn Off with Installing Updates". I managed to find out that this install was this "Installing Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) update 1 of 1 .... " Now, when I click on the Installing Updates icon (the yellow icon, that appears on the task bar near the clock), and Install it. It tries to install and it fails. Now, why is this install alone failing? Second, if we are not able to ascertain why this is failing, can we at least ensure that it is removed from the list of possible installs so that everytime it does not ask me to install it.

    Read the article

  • CUPS basic auth error through web interface

    - by Inaimathi
    I'm trying to configure CUPS to allow remote administration through the web interface. There's enough documentation out there that I can figure out what to change in my cupsd.conf (changing Listen localhost:631 to Port 631, and adding Allow @LOCAL to the /, /admin and /admin/conf sections). I'm now at the point where I can see the CUPS interface from another machine on the same network. The trouble is, when I try to Add Printer, I'm asked for a username and password, but my response is rejected even when I know I've gotten it right (I assume it's asking for the username and password of someone in the lpadmin group on the server machine; I've sshed in with credentials its rejecting, and the user I'm using has been added to the lpadmin group). If I disable auth outright, by changing DefaultAuthType Basic to DefaultAuthType None, I get an "Unauthorized" error instead of a password request when I try to Add Printer. What am I doing wrong? Is there a way of letting users from the local network to administer the print server through the CUPS web interface? EDIT: By request, my complete cupsd.conf (spoiler: minimally edited default config file that comes with the edition of CUPS from the Debian wheezy repos): LogLevel warn MaxLogSize 0 SystemGroup lpadmin Port 631 # Listen localhost:631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd # DefaultAuthType Basic DefaultAuthType None WebInterface Yes <Location /> Order allow,deny Allow @LOCAL </Location> <Location /admin> Order allow,deny Allow @LOCAL </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny Allow @LOCAL </Location> # Set the default printer/job policies... <Policy default> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> # Set the authenticated printer/job policies... <Policy authenticated> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy>

    Read the article

  • What steps can you take to ensure sane build environments when compiling software?

    - by Chris Adams
    Hi guys, I've been stuck with a compilation problem when building a standardised virtual machine on CentOS 5.4, and I'm in the dark here as to a) why this error is occurring, and b) how to fix it, and in the hope that someone else stumbles across this problem too, I'm hoping someone can help me find the solution here. I'm getting a configure: error: newly created file is older than distributed files! error when trying to compile Ruby Enterprise like below when I try to run the installer, and the solutions offered to on the forums (of checking the tine, and touching the files to update the time associated with them) don't seem to be helping here. What steps can I take to work out what the cause of this problem? [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo ./installer Welcome to the Ruby Enterprise Edition installer This installer will help you install Ruby Enterprise Edition 1.8.7-2009.10. Don't worry, none of your system files will be touched if you don't want them to, so there is no risk that things will screw up. You can expect this from the installation process: 1. Ruby Enterprise Edition will be compiled and optimized for speed for this system. 2. Ruby on Rails will be installed for Ruby Enterprise Edition. 3. You will learn how to tell Phusion Passenger to use Ruby Enterprise Edition instead of regular Ruby. Press Enter to continue, or Ctrl-C to abort. Checking for required software... * C compiler... found at /usr/bin/gcc * C++ compiler... found at /usr/bin/g++ * The 'make' tool... found at /usr/bin/make * Zlib development headers... found * OpenSSL development headers... found * GNU Readline development headers... found -------------------------------------------- Target directory Where would you like to install Ruby Enterprise Edition to? (All Ruby Enterprise Edition files will be put inside that directory.) [/opt/ruby-enterprise] : -------------------------------------------- Compiling and optimizing the memory allocator for Ruby Enterprise Edition In the mean time, feel free to grab a cup of coffee. ./configure --prefix=/opt/ruby-enterprise --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... configure: error: newly created file is older than distributed files! Check your system clock This is a virtual machine running on virtualbox, and the time of the host and the virtual machine are identical, and up to date. I've also tried running this after updating time with an ntp-client, so no avail. I tried this after reading this post here of someone having a similar problem [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ date Tue Apr 27 08:09:05 BST 2010 The other approach I've tried is to touch the top level the files in the build folder like suggested here, but this hasn't worked either (an to be honest, I'm not sure why it would have worked either) [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo touch ruby-enterprise-1.8.7-2009.10/* I'm not sure what I can do next here - the problem seems to be the bash configure script that returns this error error: newly created file is older than distributed files!, at line :2214 { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi ### PROBLEM LINE #### # this line is the problem line - this is returned true, sometimes it isn't and I can't # see a pattern that that determines when this will test will pass or not. test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi the thing that makes this really frustrating is that this script works sometimes, when the VM has been running for an hour or so it works, but not at boot. There's nothing I see in the crontab that suggests any hourly tasks are run that might change the state of the system enough make a difference to this script working. I'm totally at a loss when it comes to debugging beyond here. What's the best approach to take here? Thanks

    Read the article

  • Double MySQL Running on Mountain Lion

    - by Norris
    After I've done a full restart, my Apache PHP server doesn't connect to Local MySQL ( connecting via 127.0.0.1 because localhost for some reason fails always ). So I did this today: ? ~ mysqladmin shutdown -u root -p Enter password: ? ~ mysqladmin shutdown -u root -p Enter password: mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)' Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists! Which basically means that I succeeded in shutting down mysql. But as soon as I did - Apache PHP successfully connect to MySQL and my local sites work without a hiccup until the next restart. Here are a few other details: (as you can tell - I've installed MySQL via brew) ? ~ sudo ps aux | grep mysql N 4774 0.0 0.0 2432768 620 s000 S+ 9:53AM 0:00.00 grep mysql N 4772 0.0 2.6 3030168 440688 ?? S 9:51AM 0:00.29 /usr/local/Cellar/mysql/5.6.13/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.6.13 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.6.13/lib/plugin --bind-address=127.0.0.1 --log-error=/usr/local/var/mysql/N.local.err --pid-file=/usr/local/var/mysql/N.local.pid N 4686 0.0 0.0 2433432 1000 ?? S 9:51AM 0:00.01 /bin/sh /usr/local/opt/mysql/bin/mysqld_safe --bind-address=127.0.0.1 N 4362 0.0 2.7 3120276 458728 ?? S 9:47AM 0:00.45 mysqld ? ~ lsof -i | grep mysql mysqld 4362 N 16u IPv6 0x76959e40691f9f93 0t0 TCP *:mysql (LISTEN) This is the weird thing: ? ~ killall -9 mysqld MySQL Is dead! Apache doesn't connect. Then, when I run: ? ~ sudo mysqladmin shutdown -u root -p Enter password: Apache is (again) able to successfully connect to MySQL. As far as I understand this means that I have two mysql servers setup and both of them are trying to start up at the same time, but I don't have the slightest idea on how to fix it. I've tried brew reinstalling but that didn't help. ? ~ which mysqladmin /usr/local/bin/mysqladmin ? ~ whence -p mysql /usr/local/bin/mysql

    Read the article

  • Installing nGinX Reverse Proxy on CentOS 5

    - by heavymark
    I'm trying to install nGinX as a reverse proxy on CentOS 5 with apache. The instructions to do this are here: http://wiki.mediatemple.net/w/(dv):Configure_nginx_as_reverse_proxy_web_server Note- in the instructions, for the url to get nginx I'm using the following: http://nginx.org/download/nginx-1.0.10.tar.gz Now here is my problem. After installing the required packages and running .configure I get the following: checking for OS + Linux 2.6.18-028stab094.3 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-51) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found checking for SO_ACCEPTFILTER ... not found checking for TCP_DEFER_ACCEPT ... found checking for accept4() ... not found checking for int size ... 4 bytes checking for long size ... 8 bytes checking for long long size ... 8 bytes checking for void * size ... 8 bytes checking for uint64_t ... found checking for sig_atomic_t ... found checking for sig_atomic_t size ... 4 bytes checking for socklen_t ... found checking for in_addr_t ... found checking for in_port_t ... found checking for rlim_t ... found checking for uintptr_t ... uintptr_t found checking for system endianess ... little endianess checking for size_t size ... 8 bytes checking for off_t size ... 8 bytes checking for time_t size ... 8 bytes checking for setproctitle() ... not found checking for pread() ... found checking for pwrite() ... found checking for sys_nerr ... found checking for localtime_r() ... found checking for posix_memalign() ... found checking for memalign() ... found checking for mmap(MAP_ANON|MAP_SHARED) ... found checking for mmap("/dev/zero", MAP_SHARED) ... found checking for System V shared memory ... found checking for POSIX semaphores ... not found checking for POSIX semaphores in libpthread ... found checking for struct msghdr.msg_control ... found checking for ioctl(FIONBIO) ... found checking for struct tm.tm_gmtoff ... found checking for struct dirent.d_namlen ... not found checking for struct dirent.d_type ... found checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for sha1 in system md library ... not found checking for OpenSSL sha1 crypto library ... found checking for zlib library ... found creating objs/Makefile Configuration summary + using system PCRE library + OpenSSL library is not used + md5: using system crypto library + sha1: using system crypto library + using system zlib library nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" It says if you get errors to stop and make sure packages are installed. I didn't get errors but as you can see I got several "not founds". Are those considered errors? If so how do I resolve that. And as noted in the link, I cannot install through yum, because it wont work with plesk then. Thanks!

    Read the article

  • Starting and stopping X11 and LXDE from command line

    - by Radian
    I have a Raspberry Pi with Debian Wheezy (Raspbian) and so far I've managed to learn quite a lot about Linux just playing around, but I have a few questions for all you seasoned Linux pros out there. 1) From command line, if I execute startx, X11 will launch followed by LXDE. If I had a monitor connected, I'm imagining I would see a transition from command line to the desktop environment. Can I launch X11 first with x, then start LXDE on top of X11 afterwards with /etc/init.d/lxdm start (is this correct?) and get to the same result as startx? 2) Instead, let's say I executed /etc/init.d/lxdm start alone, would X11 start automatically (since LXDE relies on X11)? 3) From desktop, if I CTRL+ALT+F1 to get back to command line, then I should be able to shutdown LXDE using /etc/init.d/lxdm stop. Does X11 automatically close with the termination of LXDE? 4) What is the proper/safe way to shutdown X11? Thanks

    Read the article

  • Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

    - by itchy355
    I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

    Read the article

  • sysprep failure on Windows Server 2008

    - by dushyantp
    Before deploying a Azure VM Role, we need to perform %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown But in my case the sysprep fails with the log file %windir%\system32\sysprep\Panther\setuperr.txt saying: 2012-07-05 08:03:57, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31 2012-07-05 08:03:57, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f I do not always want to create a new image. Is there any work around? I followed the instructions in MS support here and tried: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:.\unattend.xml It did not work. Under certain circumstances, I need to tear down the VM Image from azure and re-deploy with some more changes. So sysprep has to run almost twice every week.

    Read the article

  • Windows Updates - Does Not Install, how can I remove it

    - by Kanini
    Everytime I shutdown my Windows XP, it comes up with the following screen which says Turn Off with Installing Updates (Of course, it also gives me an option as follows, "Click here to turn off without installing updates.") When I do a normal shutdown asking it to "Install Updates and Turn It Off", it doesn't actually install the updates. Each subsequent time I try to shut down the PC, it still prompts me to "Turn Off with Installing Updates". I managed to find out that the install was this: Installing Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) update 1 of 1 .... When I click on the Installing Updates icon (the yellow icon, that appears on the task bar near the clock), and install it, it tries to install but fails: Why is this install alone failing? Secondly, if it's not possible to ascertain why the installation is failing, can I at least ensure that it's removed from the list of possible installs so that each time it does not ask me to install it?

    Read the article

  • XP Restart After Power Failure

    - by Jim
    Hello, I've almost got my power settings sorted and was hoping someone could help? If I'm running XP and the power is cut, when the power is restored my machine auto restarts (this is what I want!) However, if I shutdown my machine properly (from the start menu & without touching the PC power button!), then switch the power off at the socket, then switch the power back on, the PC does not automatically restart. It's like the bios(?) recieives a message saying "aha, genuine shutdown and not a power cut, therefore do not restart on power restore." I want my PC to restart everytime it sees power restored from the socket? Any way round this? Anyone seen this before? I've upgraded my bios. Thanks in advance, Jim

    Read the article

  • CommunicationException when shutting down JBoss 4.2.2

    - by Brian
    I have deployed an application using JBoss 4.2.2 on a 64-bit RHEL5 server. Since there are other JBoss servers, I had to change some port configurations so that there would be no conflicts when starting the server. So right now I'm using ports-01 from the sample-bindings.xml file that came in the docs/examples/binding-manager/samples directory. In addition, below is a list of all the files I've edited to reflect the new ports: JBOSS_HOME/servers/default/deploy/jboss-web.deployer/server.xml: Changed Connector port - 8080 to 8180 Changed AJP 1.3 Connector port - 8009 to 8109 JBOSS_HOME/server/default/deploy/jbossws.beans/META-INF/jboss-beans.xml Changed 8080 to 8180 JBOSS_HOME/server/default/conf/jboss-service.xml: Changed 8083 to 8183 Changed 1099 to 1299 Changed 1098 to 1298 Changed 4444 to 4644 Changed 4445 to 4645 Changed 4446 to 4646 Changed 4447 to 4647 JBOSS_HOME/server/default/conf/jboss-minimal.xml: Changed 1099 to 1299 Changed 1098 to 1298 When I start the server (binding to localhost) everything is fine and I'm able to access the application. But when I try to shutdown the server I get the following error: Exception in thread "main" javax.naming.CommunicationException: Could not obtain connection to any of these urls: localhost [Root exception is javax.naming.CommunicationException : Failed to connect to server localhost:1099 [Root exception is javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused]]] at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1562) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:634) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:627) at javax.naming.InitialContext.lookup(InitialContext.java:392) at org.jboss.Shutdown.main(Shutdown.java:214) Caused by: javax.naming.CommunicationException: Failed to connect to server localhost:1099 [Root exception is javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused]] at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:274) at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1533) ... 4 more Caused by: javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused] at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:248) ... 5 more Caused by: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:525) at java.net.Socket.connect(Socket.java:475) at java.net.Socket.(Socket.java:372) at java.net.Socket.(Socket.java:273) at org.jnp.interfaces.TimedSocketFactory.createSocket(TimedSocketFactory.java:84) at org.jnp.interfaces.TimedSocketFactory.createSocket(TimedSocketFactory.java:77) at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:244) ... 5 more Is there any other file that I need to change the 1099 to 1299, or am I missing some other step?

    Read the article

  • Automatically wake up notebooks not on the ethernet

    - by gletscher
    I am looking for an automated backup system and I like bacula. I have 3 Notebooks and a Desktop computer that need regular backup. Now I don't want to let them run all night just to do the backuping, so I was thinking I could use wake-on-lan to have bacula wake up the machines, then do the backups, and shut them down afterswards. While this may work with devices on the ethernet, it won't work with the Notebooks on the wifi. So is it possible to have the Notebooks schedules to automatically wake up from suspend or shutdown ? Or is it possible to interject a shutdown command if it is after a certain hour and call the bacula director to start the backup now? I'm new to controlling the linux system using scripts, so any hints on how and where to start are greatly appreciated. Thanks alot for your help, input and ideas.

    Read the article

  • Give root password for maintenance

    - by Jevgeni Smirnov
    After entering shutdown now in terminal I get everything running normally and then: All processes ended withing 2 seconds...done INIT: Going single user INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal Give root password for maintenance(or.... I press Ctrl+D, and it shows me login screen Debian. Shutdown through GUI works properly. UPDATE 1 It seems some process hangs. Moreover I'v managed to poweroff server through several retries. Recently i'v installed only ntp and ntpdate. Nothing more. I suppose it might be it conflicting with iptables.

    Read the article

  • Getting a black laptop screen

    - by Vivek
    I get a black screen when I boot my laptop. The laptop was in sleep mode initially, so when I pressed the power button, it looked as if it woke up from sleep mode, but the screen was blank. So, I held down the power button to force shutdown the laptop and then removed the battery. But after booting the laptop the screen still remains black. The bios/boot screen remains black as well. I have tried connecting it to external hdmi/vga/s-video devices and booting still no go. Windows loads fine, as I can type the password and get the 'Ding', then alt-f4 and shutdown windows. If it helps, the laptop model is Asus G1S-A1. Thanks in advance!

    Read the article

  • Redmine VirtualHost config not working with Document Root

    - by David Kaczynski
    I am trying to have requests for https://redmine.example.com access my redmine instance, but I am just getting an "Index of /" page with the contents of /var/www/redmine (which is a symbolic link to /usr/share/redmine/public). My VirtualHost config: <VirtualHost *:443> ServerName redmine.example.com DocumentRoot /var/www/redmine SSLEngine on SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown </VirtualHost> My /etc/apache2/sites-enables/redmine: RailsBaseURI /redmine How do I get the requests for https://redmine.example.com to correctly launch my redmine instance?

    Read the article

  • Windows 8 Unable to perform hibernate

    - by Jones
    Windows 8 Enterprise edition x86. Already enabled hibernate option, to have it on shutdown menu (start menu?) and set to hibernate on lid closing. However it's not hibernating for me. When I'm trying to sleep, it's sleep fine and wake up like a kid. But when I'm demanding hibernate, it disconnects internet, turn off screen and be back to lock screen in one second. Steps I've tried. Complete shutdown Clear hiberfile.sys by disabling and enabling back Resetting my power settings. Causes I suspect: Had dual boot with BackTrack with Windows 8 GUI boot manager. It was fine until I reinstall BackTrack, bootmgr resetted and I'm in Ubuntu boot menu;. Using additional hard disk through USB cable.(But it's not a problem before few days, however) How to make my system to hibernate and wakeup again.

    Read the article

  • Server 2008 Likes to restart itself

    - by Campo
    I have a weird issue here. I notice about once a week the web server restarts itself. This would be only a minor issue if we were not planning on implementing an IP failover. I have checked the event logs. I don't see anything that indicates a reason for the restart. I need some help diagnosing the reason the server restarts. It happened last night at 5:00AM Last even in the log was 1 hour before the unexpected shutdown. Here is the Log for the shutdown event. Any help is much appreciated. I know there isn't much to go on yet. Log Name: System Source: EventLog Date: 5/5/2010 5:01:12 AM Event ID: 6008 Task Category: None Level: Error Keywords: Classic User: N/A Computer: SERVERNAME Description: The previous system shutdown at 4:56:41 AM on 5/5/2010 was unexpected. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="EventLog" /> <EventID Qualifiers="32768">6008</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-05-05T09:01:12.000Z" /> <EventRecordID>346094</EventRecordID> <Channel>System</Channel> <Computer>SERVERNAME</Computer> <Security /> </System> <EventData> <Data>4:56:41 AM</Data> <Data>5/5/2010</Data> <Data> </Data> <Data> </Data> <Data>39594</Data> <Data> </Data> <Data> </Data> <Binary>DA070500030005000400380029008E03DA070500030005000800380029008E033C0000003C000000000 000000000000000000000000000000100000000000000</Binary> </EventData> </Event>

    Read the article

  • How do I replace a harddrive that is in a two-way mirror storage space on Windows 8?

    - by Jon
    I have a storage space in Windows 8 doing a two-way mirror on three harddrives. The sizes are 297GB, 189GB, and 70GB. I would like to replace the 70GB HD with a larger one. My thought was to remove that drive from the space via the Storage Space control panel, shutdown, replace HD with bigger drive, reboot, add new HD to the storage space. I can't find any options to remove a HD from a storage space in the control panel. Should I just shutdown and swap out the small drive or is there another process for safely replacing the old HD? (By the way, the old HD is still operational.)

    Read the article

  • My ubuntu server is losing connectivity, require assistance troubleshooting

    - by Coderama
    I have two server monitoring tools that check the uptime of my Ubuntu 10.04.1 LTS server. Over the last month both of these tools have reported the following outages: Jan - 15mins: self recovery Jan - 5 mins: self recovery Feb - 15mins: I managed to be online when this happened and logged into my control panel to find that my server was shutdown. I manually restarted it only because I was online. I wonder if it would have restarted? I have contacted my VPS provider (webbynode) who could not see any any problems with their VPS infrastructure for the February outage. I have also checked the following log files to see if there are any anomalies that could be the cause of the outages; I am unable to see anything related to the server shutdown (Feb) in these logs: /var/log/auth.log /var/log/apache2/error.log /var/log/syslog /var/log/kern.log /var/log/boot /var/log/messages Could anyone suggest any other things I should look out for, such as additional system logs? I just added bootlogging through /etc/default/bootlogd

    Read the article

  • Virtual Server 2005 R2 kungfu

    - by AngryHacker
    Does Virtual Server 2005 R2 have a command line interface, that's versatile enough? Here is a situation. I run a Win2k VM on an old memory constrained machine. I allocate it 378MB of RAM and the VM runs just fine. Once a month, inside the VM, I backup the (a very large) database, compress it using 7Zip and ftp it to the backup site (all in a script). Unfortunately the compression part takes a massive amount of RAM (far exceeding the 378MB), it goes for the paging file and brings absolutely everything to a crawl and literally takes 2-3 days, if left unattended. So to fix this, I have to shutdown the VM, give it temporarily 768MB of RAM and then the whole thing finishes in 20 minutes. So, is there a way do the following automatically from the host machine in a script? Shutdown the guest OS (I think, I got this part) Change the RAM allocation from 378 to 768 Start the guest OS again then, 1 hour later, do everything in reverse.

    Read the article

  • Windows 7 unload driver/disconnect usb before restart

    - by brux
    In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

    Read the article

  • MySQL Cluster Failover doesn't work

    - by Lukasz
    I have two servers, where First server 10.100.15.150: 1. one mgm server 2. one ndbd 3. one mysql api Second server 10.100.15.160: 1. one ndbd 2. one mysql api When i start all 'parts' of cluster it looks : Cluster Configuration [ndbd(NDB)] 2 node(s) id=21 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0) id=22 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0, Master) [ndb_mgmd(MGM)] 1 node(s) id=3 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) [mysqld(API)] 2 node(s) id=11 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) id=12 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17) When i shutdown first machine - 10.100.15.150, on second the nbdb process also has been shutdown so i cannot use this data node and cluster fail ... How i must configure this cluster to get FailOver working ? Thx

    Read the article

  • How To Cancel Pending Windows 7 Updates

    - by Itai
    How To Cancel Pending Windows 7 Updates? The key is pending. The shutdown button has the windows update symbol meaning that there are updates that were selected to be installed which were download and will be installed upon shutdown. The only thing is that my machine will no longer boot if I let it install those updates! They are incompatible with a driver needed in the system and I did not found out until too late. The system admin used a recovery disk to get back to the previous restore point, only the updates are now pending, so I need to cancel those before the machine shutdowns next.

    Read the article

  • How do I execute a script or program on Windows Shut Down

    - by Subhen
    I want to run a exe or bat file when window shut down? I want to unmount few drives , which are mounted by my application , when user shutdown the system. For that I need to execute another exe on shutdown, which will disconnect drives mounted by my app. I got few links which shows we can create a entry in Group Policy to execute a programe while window shut down. I am not sure how I can add a entry to Group ploicy by C++ code. Again , group policy doesn't work with Win Vista. Any other better approach ?

    Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >