Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 311/590 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• CPU clock scales down so computer is unusable after switching to battery

  - by Ryan

  When I am plugged in my laptop runs great however when I unplug it and I'm on battery power my CPU clock speed scales down pretty much all the way. I know this is happening by monitoring the clock speed. When plugged in it will usually stay between 1000MHz and 3000MHz but when I unplug it it quickly scales down to less than 500MHz and will get as low as 100MHz and it will NEVER scale up at all on battery power. After I plug the power back in it will then begin operating normally in about a minute. I have tried setting the MIN and MAX CPU performance in power options to 100% and have tried messing around with cooling settings which seemed to be a problem with HP laptops. I have a Toshiba Satellite M500-ST6444 running Windows 7. The BIOS is up to date. I have tried two versions.

  Read the article

• Ethernet port sleeping on PS3 running linux

  - by Doug

  My lab has a PS3 running Ubuntu Linux 9.04 Server Edition. After a period of a few hours with no use, the Ethernet connection (eth0) seems to go to sleep, causing the connection to be lost. Pinging or trying to SSH into the machine results in no response. The fix I've been using is to access the machine locally and restart it (trying to bring eth0 down then up doesn't seem to correct it). I've tried setting up an hourly cron job that runs on the PS3 and pings another machine just to create network activity, but this doesn't seem to solve the problem either. Update: The solution was to run the above cron job much more frequently: every 10 minutes works.

  Read the article

• Managing service passwords with Puppet

  - by Jeff Ferland

  I'm setting up my Bacula configuration in Puppet. One thing I want to do is ensure that each password field is different. My current thought is to hash the hostname with a secret value that would ensure each file daemon has a unique password and that password can be written to both the director configuration and the file server. I definitely don't want to use one universal password as that would permit anybody who might compromise one machine to get access to any machine through Bacula. Is there another way to do this other than using a hash function to generate the passwords? Clarification: This is NOT about user accounts for services. This is about the authentication tokens (to use another term) in the client / server files. Example snippet: Director { # define myself Name = <%= hostname $>-dir QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 3 Password = "<%= somePasswordFunction =>" # Console password Messages = Daemon }

  Read the article

• What happens if I run caspol.exe multiple times?

  - by Maclovin

  Hi there! Caspol.exe is used to modify security policy for the machine policy level, the user policy level, and the enterprise policy level. What I use it for, is setting up av trust between the client and an area on some server. I went through the scripts on the server, and found an interesting script that sets up full trust via caspol between a client in one zone, and an application on the server. That script has been running every day, for every logon, since it was implemented. Can someone tell me the consequences? I guess there is about 500 trusts between the client computer and the server, all which points to the same thing.

  Read the article

• login as rsh in rhel 6 without entering password

  - by cartmancakes

  I need to be able to login to a RHEL 6 server using rsh (please don't flame me about security, it's irrelevant in this particular instance) as root without having to enter a password. My procedure for setting this up works great in RHEL 5.x, but does not work in RHEL 6. I suspect this has something to do with PAM, but I'm inexperienced with how to use PAM. Can someone help me with this? /etc/pam.d/rsh auth required pam_rhosts.so auth required pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session /etc/pam.d/rlogin auth required pam_nologin.so auth [user_unknown=ignore success=ok ignore=ignore auth_err=die default=bad] pam_securetty.so auth sufficient pam_rhosts.so auth include common-auth auth required pam_mail.so account include common-account password include common-password session required pam_loginuid.so session include common-session Thanks!

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• MMS gets hostname from uname and can't connect to it

  - by Adam Monsen

  I'm trying to get 10gen's MongoDB Monitoring Service monitoring my 3-node replica set. The replica set running in an AWS VPC. Each node runs on a different [virtual] machine. Assume their IPs are 192.168.1.1 (primary or secondary), 192.168.1.2 (primary or secondary), 192.168.1.3 (arbiter). From a quick look at the source, MMS appears to get the hostname of the machine it is running on like so: platform.uname()[1] For my VPC EC2 instance, this returns something like ip-192-168-1-1 MMS then tries to connect to this hostname, which does not resolve. I'd rather just use IP addresses (since they're always static), but it seems like the hardcoded use of platform.uname()[1] in mmsAgent.py precludes that. So, what's an elegant way out of this? Hack /etc/hosts? I'm not setting up a DNS server just for this. Maybe I'm just misunderstanding how to configure MMS.

  Read the article

• Best way to deploy my node.js app on a Varnish/Nginx server

  - by Saif Bechan

  I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

  Read the article

• Equivalent of phpMyAdmin for MSSQL?

  - by Tedd Hansen

  Is there any webinterface for administrating MSSQL similar to phpMyAdmin (for MySQL)? I want a self-service setup where developers can create a database through webinterface and upload/download backups of the database without local access. I've considered phpMSAdmin, but it hasn't had a release since 2006 so I'm not sure its worth the effort of setting it up. If there is something else (free or not-so-free) that would be great. My question is similar to this one posted 2 years ago, but no good webinterface was found back then. SQL Web Data Administrator seems interesting, but it lacks a few features - most notably creating new databases (also, not updated since 2007).

  Read the article

• How soon does nginx's token bucket replenish when limiting at requests per minute?

  - by Michael Gorsuch

  We've decided that we want to experiment and limit requests per minute instead of requests per second on our sites. However, I am confused by the burst parameter in this context. I am under the impression that when you use the 'nodelay' flag, the rate limiting facility acts like a token bucket instead of a leaky bucket. That being the case, the bucket size is equal to the burst parameter, and every time that you violate the policy (say 1 req/s), you have to put a token in the bucket. Once the bucket is full (being equal to the burst setting), you are given a 503 error page. I am also under the impression that once a violator stops going against the policy, a token is removed from the bucket at a rate of 1 token/s allowing him to regain access to the site. Assuming that I have the above correct, my question is what happens when I start regulating access per minute? If we chose 60 requests per minute, at what rate does the token bucket replenish?

  Read the article

• Accessing localhost via IIS 7.5 on Windows 7 very slow

  - by Ian Devlin

  (I've asked this over on stackoverflow already, but thought I'd ask here as well) I'm currently running an ASP.NET application on IIS 7.5 on Windows 7. When I access this application on Internet Explorer (either 6, 7 or 8) it is incredible slow and often fails to load at all. There are messages at the bottom saying: Waiting for http://localhost/....... or sometimes waiting for about:blank (I've read that this can be a virus, but I've run all the usual checks and it's not). constantly, but it returns with the usual: "Internet Explorer cannot display the webpage" I've also tried this by using 127.0.0.1 and the machine name, with the same results. I've tried the same application on the latest Firefox, Safari, Chrome and Opera and they all work fine. I've also installed the same application on a Windows Server 2003 machine, and it all works fine via Internet Explorer. I've also turned off the IPv6 setting on the LAN connection. Soes anyone have any ideas why this doesn't work with Internet Explorer and yet does with other browsers?

  Read the article

• Apache connection intermittantly times out on LAN

  - by jonescb

  I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well. Even when I connect to my server over LAN, Firefox will occasionally time out while connecting. I can't figure out what is causing this. The error log isn't showing anything. I even cleaned the error log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error log. Can anybody help me find what the problem is? Here is my httpd.conf Pastebin It's the default Fedora configuration; I've only changed the ServerName if I remember correctly. I'm pretty sure it's not the Timeout setting, because on LAN it should never time out. I don't believe it's a load issue either, I'm the only one connecting to it. I'm not an Apache expert, so if more information is needed I'll need some instructions on how to get that data.

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• Running telnet standalone - possible?

  - by Lanz

  So, this is what I want to do: there is a local non-superuser and it can upload the file into /tmp. Using this account, I download a telnet server package equivalent to what is already installed. I modify some settings, setting all file directories into /tmp. Then compile and run as a standalone telnet server. Is this possible? If not, what makes this impossible? Or as a non-privileged user, would there be any way to enable telnet?

  Read the article

• Problems when loop over a series of ssh-ed commands

  - by Jack Medley

  I have a series of server machines which I want to run the same command on. Each command takes hours and (even though I am running the commands using nohup and setting them to run in the background) I have to wait for each to finish before the next starts. Here is roughly how I have set it up: On the host machines: for i in {1..9}; do ssh RemoteMachine${i} ./RunJobs.sh; done Where RunJobs.sh on each remote machine is: source ~/.bash_profile cd AriadneMatching for file in FileDirectory/Input_*; do nohup ./Executable ${file} & done exit Does anyone know of a way such that I dont have to wait for each job to finish before the next starts? Or alternatively a better way of doing this, I have a feeling what I am do is fairly sub-optimal. Cheers, Jack

  Read the article

• How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

  - by hakre

  I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

  Read the article

• Accessing WindowsXP shared printer from macbook?

  - by mobibob

  My new printer is setup on WindowsXP, it works and it is configured as a shared printer. I then setup a printer from Mac OSX 10.6.3 using the approved driver from the setup CD. I browsed for the printer via the network. When I send a test page, it queues, but never prints. Its as if the driver thinks the printer is local to the mac and just never finishes printing. THe configuration shows as: smb://dragoneye/CanonMP2 Where dragoneye is the name of the Windows XP server and the CanonMP2 is the little multi-purpose printer. My other Windows' CPU can setup and print. Is this a known problem or am I missing a setting??

  Read the article

• Software Engineer's explanation of Facebook photo privacy, with UML diagram?

  - by Alex R

  Facebook photo privacy is more complex than most people think - including the bloggers who fill the Internet trying to explain it in simple terms. Not only there is the basic album-level privacy setting to consider, but also what happens with Tagging (and related privacy settings) as well as the Share button when clicked by a Friend. Has anybody seen a good, engineering-type (e.g. UML) diagram? I envision it should include the various privacy "states" a photo can be in, what causes state transitions, and the characteristics of each state? Thanks

  Read the article

• How to shutdown Windows 8 PC without using mouse?

  - by Gopinath

  Windows 8 sports a re-imagined desktop and tablet user interface with touch friendly Metro looks. One of the major changes in Windows 8 for a common users  is the lack of start menu, with which we got friended for more than a decade. On Windows 8 we would be missing it. As there is no start menu in Windows 8, the way you shutdown a Windows 8 computer is a bit different. To shutdown using Mouse, you need to hover on the top right edge of the screen to open the hidden menu,  go to "Settings"  tab -> "Power" -> Then choose for "Shut down", "Sleep" or "Restart".  That’s a lot of Mouse movement work and if you are a power user then you may not like to do that. How about shutting down the PC using Keyboard? Here are the two ways to shutdown the PC using keyboard Keyboard shortcuts With the help of keyboard shortcuts you can navigate to Power options of Windows 8. Press Win + C to bring the Settings Charm and use Arrows and Enter keys to navigate to access Shutdown menu. This is one of the easiest way to shutdown the PC without using Mouse. Run Command If you don’t like to go through the Setting menu, you can use the traditional Run commands. Press Win + R to open Run dialog and enter the command shutdown -s -t 0 to immediately shutdown the PC.

  Read the article

• Oracle Open World / Public Sector / Identity Platform

  - by user12604761

  For those attending Oracle Open World (Oct. 1st - 3rd, 2012 at the Moscone Center in San Francisco), the following details are recommended:  OOW Focus on Public Sector. Also, Oracle's foundational Identity and Access Management and Database Security products that support government security ICAM solutions are covered extensively during the event, the following will be available: The focus is on Oracle's Modern Identity Management Platform.   Integrated Identity Governance Mobile Access Management Complete Access Management Low Risk Upgrades The options for attendees include 18 sessions for Identity and Access Management, 9 Identity and Access Management demonstration topics at the Identity Management Demo Grounds, and 2 hands on labs, as well as 21 database security sessions. Oracle Public Sector Reception at OOW:  Join Oracle's Public Sector team on Monday, October 1 for a night of food and sports in a casual setting at Jillian’s, adjacent to Moscone Center on Fourth Street. In addition to meeting the Public Sector team, you can enjoy Monday Night Football on several big screen TVs in a fun sports atmosphere. When: Monday, October 1, 6:30 p.m.–9:30 p.m. Where: Jillian's, 101 Fourth Street, San Francisco 

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• Context is Hindi when printing line numbers in Word 2007

  - by Lessan Vaezi

  I'm trying to print a Word 2007 document with Line Numbering turned on, and in Word the document looks fine but when I print the document, the line numbers appear in Hindi script. See screenshots here: http://www.lessanvaezi.com/context-is-hindi-when-printing-line-numbers-in-word-2007/ I tried deleting my Normal template and allowing Word to create a new one, and testing using that, with no change. I also tried using different printers. The problem goes away if I choose Arabic instead of Context under Word Options - Advanced - Show Document Content / Numeral. However, I would like to keep this setting as Context. The question is, why is the default context of my document Hindi script? Is there a way to change this context?

  Read the article

• How Can I Set the OS X Dock to Show Instantly Instead of Waiting Half a Second in Snow Leopard?

  - by Patrik Björklund

  Having a MacBook Pro 13" I find myself trying to maximize the screen real estate constantly which have led me to put the dock at the right hand corner of the screen. Now in an attempt to save a few more pixels I decided to give autohiding of the dock a go and ran into a problem that have plagued me all night... When you toggle the switch to automatically hide the dock you get stuck with a small delay before it appears when hovering the edge of the screen. I have learnt that this is one of the many design principles Apple have put in use. In this case it appears to be their mission to save me from seeing the dock those few times when it's not intentional to touch the screens edge. In Windows there was a way to tweak this setting to have the menubar appear instantly by altering some registry value. Is there some way I can do this in Mac OS X?

  Read the article

• Why doesn't Spotlight find Applications on OS X Server?

  - by Clinton Blackmore

  On our Mac OS X Server 10.5.x boxes, using spotlight (ie. the magnifying glass in the top corner) does not find applications and utilities, but it does on Mac OS X client (and so, we all use the keyboard shortcut and end up frustrated -- it either gives us nothing, or, without us realizing it until later, an application from another partition.) It isn't clear to me if we've done something strange setting up our servers, but they are all like this. Any idea what caused it and how we fix it? Everything (including Applications) are set to show up in a spotlight search in System Preferences).

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >