Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 314/590 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• Why does my mic boost automatically go to 100 on every boot?

  - by Ben

  When my computer turns on, it automatically sets the "mic boost" sound setting to 100. This causes a loud static sound in my speakers. I can manually go to alsamixer and turn the mic boost down manually, but I would prefer it if I didn't have to do this every time I turn the computer on. I've tried running sudo alsactl store after fixing the settings, and this does save them, but I have to run sudo alsactl restore to restore the settings. This means that I have to manually fix the sound every time I start the computer anyway, so it isn't really a fix. I tried putting sudo alsactl restore in my startup programs, but that didn't seem to fix anything. I'm running Ubuntu 12.04, but I started having this problem before upgrading from 11.10. I'm using a Sony Vaio laptop. I'm not really sure what made it start; it seemed like I just started having the problem randomly one day. Any help would be appreciated! Edit: here is the output from running amixer: http://paste.ubuntu.com/1060080/

  Read the article

• Rewrite img and link paths with htaccess and serve the file from rewritten path?

  - by frequent

  I have a static mockup page, which I want to "customize" by switching a variable used in image-src and link-href attributes. Paths will look like this: <img src="/some/where/VARIABLE/img/1.jpg" alt="" /> <link rel="some" href="/some/where/VARIABLE/stuff/foo.bar" /> I'm setting a cookie with the VARIABLE value on the preceding page and now want to modfiy the paths accordingly by replacing VARIABLE with the cookie value. I'm a htaccess newbie. This is what I have (doesn't work): <IfModule mod_rewrite.c> # get cookie value cookie RewriteCond %{HTTP_COOKIE} client=([^;]*) # rewrite/redirect to correct file RewriteRule ^/VARIABLE/(.+)$ /%1/$1 [L] </IfModule> So I thought my first line gets the cookie value and stores this in %1. And on the second line I'm filtering VARIABLE, replace it with the cookie value and whatever comes after VARIABLE in $1. Thanks for sheeding some light on what I'm doing, doing wrong and if I can do this at all using htaccess. EDIT: I'm sort of halfway through, but it's still not working... Mabye someone can apply the finishing touches: <IfModule mod_rewrite.c> # check for client cookie RewriteCond %{HTTP_COOKIE} (?:^|;\s*)client=([^;]*) # check if an image was requested RewriteCond %{REQUEST_FILENAME} \.(jpe?g|gif|bmp|png)$ # exclude these folders RewriteCond %{REQUEST_URI} !some/members/logos # grab everything before the variable folder and everything afterwards # replace this with first bracket/cookie_value/second bracket RewriteRule (^.+)/VARIABLE/(.+)$ $1/%1/$2 [L] </IfModule> Still can't get it to work, but I think this is the correct way of doing it. Thanks for help!

  Read the article

• DNS subdomain problem - Hover.com

  - by Ryan Sullivan

  I use hover.com to manage my domain names. I have having a huge problem with setting a sub-domain to a specific IP address: I want the sub-domain on a particular domain name that I have. I set an A type record for that sub-domain and pointed it towards the IP address; it is not working at all. The thing that is confusing me is that when I set the IP address to a sub-domain on a different domain name it works just fine. Also, I have since deleted the DNS record from the domain that it happened to work on, and when I type that address into a browser it still resolves to the IP I had it set to. I am not sure what is going on at all. If this seems confusing I am sorry, but I am very confused about the whole thing myself. If any clarification is needed, just ask and I will try to clear things up.

  Read the article

• Associate file extension to application running in XP MODE

  - by V. Romanov

  Hi I'm running a legacy application in XP mode under Win7 Professional. The application installs, runs and publishes fine (appears in win7 start menu by itself after install). However, when I want to associate a file extension from Win7 so that it opens automatically in that application, I don't have it on the list of available applications, and i found no way to add it there. Anyone knows how it can be done? I've read about associating file extensions with remote apps on TS2008, but there it's done by setting the associations in the MSI that is built on the server and used to install the app on the client. Here I have no such tools. Help would be appreciated! Vadim R.

  Read the article

• x server startx error?

  - by Chris

  root@thewhitewox:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-29-server i686 Ubuntu Current Operating System: Linux thewhitewox 2.6.18-238.9.1.el5.028stab089.1 #1 SMP Thu Apr 14 14:06:01 MSD 2011 i686 Kernel command line: quiet Build Date: 20 October 2011 03:05:54PM xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see ww w.ubuntu . com/support) Current version of pixman: 0.16.4 Before reporting problems, check http: //wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 15 00:50:32 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http ://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log What does this mean and how can I fix it?

  Read the article

• Grub: Legacy 'ask' parameter no longer supported

  - by leeand00

  I'm trying to change the resolution on my base shell (the Ctrl+Alt+1) shell in Debian so that it supports my ViewSonic monitor. The shell appears really fuzzy when it is displayed on my lcd monitor, but GRUB looks fine when it's displayed. In I tried changing part of the GRUB_CMDLINE_LINUX_DEFAULT to 'vga=ask', and now I get the error on booting up 'Legacy 'ask' parameter no longer supported' Has this 'vga=ask' value been changed to something else? Note, I tried setting it to 'vga=782' after finding a list of screen modes here and the shell font got real huge for a few seconds during boot up, and then switched back to it's awful fuzzy self again, when I went to use the Debian Bash shell. UPDATE Tried suggestion in this question, it works without fuzziness until the last resolution change which displays the user login to the shell.

  Read the article

• OpenVPN (HideMyAss) client on Ubuntu: Route only HTTP traffic

  - by Andersmith

  I want to use HideMyAss VPN (hidemyass.com) on Ubuntu Linux to route only HTTP (ports 80 & 443) traffic to the HideMyAss VPN server, and leave all the other traffic (MySQL, SSH, etc.) alone. I'm running Ubuntu on AWS EC2 instances. The problem is that when I try and run the default HMA script, I suddenly can't SSH into the Ubuntu instance anymore and have to reboot it from the AWS console. I suspect the Ubuntu instance will also have trouble connecting to the RDS MySQL database, but haven't confirmed it. HMA uses OpenVPN like this: sudo openvpn client.cfg The client configuration file (client.cfg) looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client auth-user-pass #management-query-passwords #management-hold # Disable management port for debugging port issues #management 127.0.0.1 13010 ping 5 ping-exit 30 # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. #;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. # All VPN Servers are added at the very end ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. # We order the hosts according to number of connections. # So no need to randomize the list # remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ./keys/ca.crt cert ./keys/hmauser.crt key ./keys/hmauser.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ;ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. #comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 # Detect proxy auto matically #auto-proxy # Need this for Vista connection issue route-metric 1 # Get rid of the cached password warning #auth-nocache #show-net-up #dhcp-renew #dhcp-release #route-delay 0 120 # added to prevent MITM attack ns-cert-type server # # Remote servers added dynamically by the master server # DO NOT CHANGE below this line # remote-random remote 173.242.116.200 443 # 0 remote 38.121.77.74 443 # 0 # etc... remote 67.23.177.5 443 # 0 remote 46.19.136.130 443 # 0 remote 173.254.207.2 443 # 0 # END

  Read the article

• s3cmd run on command line not on cron

  - by Jonar

  Many have said that the problem is with environment but I still can't seem to solve this problem. BTW I am using Ubuntu 9.10 login as user, then sudo -s using this command: s3cmd put file s3://bucket worked! now here is the simple script intended for testing: #! /bin/bash env >/tmp/cronjob.log s3cmd put file s3://bucket issuing the command crontab -e * * * * * /opt/script 2>&1 | logger Then using tail to syslogs Dec 3 23:22:01 ubuntu CRON[10795]: (root) CMD (/opt/script 2&1 | logger) But by verifying it on s3Fox Organizer, the file is not uploaded. (I tried changing the #! /bin/sh (no effect), putting crons on /etc/crontab (no effect), setting HOME=/home/user (no effect) What are other options to try? Or other ways to debug this problem. Thanks

  Read the article

• Why is Thunderbird saying I am working offline when Work Offline is not ticked?

  - by Dizzley

  Thunderbird says "You are currently offline. Do you want to go online to get new messages?" The menu item File-Work Offline is not checked. Is there another "offline" setting? Back story: I moved my Thunderbird profile from another user to my new account today following the instructions here. (it's down as I type). This may be a red herring. I have been sending and receiving happily in the last few hours since - so I remain confused. (Windows 7 Enterprise).

  Read the article

• Colors less saturated in Snow Leopard Finder, Preview & Safari than in Chrome -- why?

  - by Andrew Swift

  If I look at the picture here in Safari, Preview or the finder, the shades of blue are significantly different than if I look at the picture in Google Chrome (they are less saturated than in Chrome). Since I am a photographer and need to prepare pictures for publication online, I need to know what a jpeg should really look like, in order to color-correct it. I have an excellent Eizo monitor that is correctly calibrated. If I open the same image in Photoshop CS3, I get the Chrome colors if I use Monitor RGB under view proof setup, and I get the Safari colors if I use Macintosh RGB. Can anyone explain the difference between these two settings, and the difference between Safari and Chrome? Which colors are correct? Photos that I prepared under Windows (during the past five years) now seem washed out in the Apple Finder and Preview, even though I had correctly prepared them. Is there a setting on the Macintosh for color calibration, besides the monitor calibration control panel?

  Read the article

• Ubuntu on Samsung NP700Z5B - no Grub

  - by copolii

  I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• What are the risks in putting website files in the "root" folder of a shared web hosting server?

  - by Obay Ouano

  A site I've been asked to manage is hosted (shared) on GoDaddy, with this folder structure: / public_html public_ftp mail stats logs etc... However, the website files are stored in the / folder, and NOT in public_html. I'm not sure if this is how GoDaddy sets up their customers' accounts, or if the old web developer accidentally changed it from public_html to root. But when we call up GoDaddy to tell them to correct this (move files to public_html), they won't change it and insist that there is no security risk unless someone gets a hold of the FTP password. Is this true? (I have always read that website files should be inside public_html.) If not, where could this setting be changed? The .htaccess is empty.

  Read the article

• Sharing Windows Folders on a Network... other PCs see but can't access

  - by John

  I'm soooo tired of network setup issues. All I want to do is share a folder and all it's sub-folders so other PCs on my network can view and change this remote location. Why is it that setting a dir to "shared" doesn't actually make it usable in any way? The other PC can see the fodler but is unable to actually open it and look inside. It seems every time I want to do this I go through some semi-random process of right clicking the folder and enabling sharing, then looking in the folder properties to add permissions and other sharing... and then I end up with some folders working but others will randomly block permission on certain files or sub-dirs. I have 5 PCs in my local testing network and I cannot believe it should be this complicated... where is the simple "make this folder work on the network" option?! I have a mixture of XP, Vista & W7 machines, but this seems common to all of them.

  Read the article

• Displaying Datamatrix in application error screen

  - by DaveNay

  Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

  Read the article

• How to disable Utility Manager (Windows Key + U)

  - by Skizz

  How do I disable the Windows Key+U hotkey in Windows XP? Alternatively, how do I stop the utility manager from being active? The two are related. The utilty manager is currently providing a potential security hole and I need to remove it*. The system I'm developing uses a custom Gina to log in and start a custom shell. This removes most Windows Key hotkeys but the Win+U still pops up the manager app. Update: Things I've tried and don't work: NoWinKeys registry setting - this only affects explorer hotkeys; Renaming utilman.exe - program reappears next login; Third party software - not really an option, these machines are audited by the clients and additional, third party software would be unlikely to be accepted. Also, the proedure needs to be reasonably straightforward - this has to be done by field service engineers to existing machines (machines currently in Russia, Holland, France, Spain, Ireland and USA). * The hole is via the internet options in the help viewer the utility app links to.

  Read the article

• RESTful applications logic and cross resource operations

  - by Gaz_Edge

  I have an RESTful api that allows my users to receive enquiries about their business e.g. 'I would like to book service x on date y. Is this available?'. The api saves this information as a resource to the following URI users/{userId}/enquiries/{enquiryId} The information shown when this resource is retrieved are the standard sort of things you'd expect from an enquiry - email, first_name, last_name, address, message The api also allows customers to be created for a user. The customer has a login and password and also a profile. The following URIs expose these two resources PUT users/{userId}/customers/{customerId} PUT users/{userId}/customers/{customerId}/profile The problem I am having is that I would like to have the ability to allow users to create a customer from an enquiry. For example, the user is able to offer their service on the date requested and will then want to setup a customer with login details etc to allow them to manage the rest of the process. The obvious answer would be to use a URI like users/{userId}/enquiries/{enquiryId}/convert-to-client The problem with this is is that it somewhat goes against a lot of what I've been reading about how to implement REST (specifically from the book Restful Web Services which suggests that URIs should point to resources not operations on resources). The other option would be to get the client application (i.e. the code that calls the api) to handle some of this application logic. This doesn't quite feel right to me. I have implemented in my design that the client app is fairly dumb. It knows just enough to display the results from the API, and does not contain any application logic. Would be great to hear what others views are on the best way of setting this up Am I wrong to have no application logic in the client app? How would I perform this operation purely in the REST api?

  Read the article

• NAT and NGINX on the same server

  - by Morten

  I'm setting up a VPC cluster for my collaborative todo list application www.getdoneapp.com. To have my servers on the private network I need a NAT server so my servers on the private network can connect to the internet to receive updates and what not. The NAT server will consume an elastic IP address, so I'm wondering if I can just have that NAT server run nginx to direct traffic to my internal servers for HTTP. So the question is, is it a bad idea to run NGINX and NAT on the same server, or should I go for consuming 2 elastic IP addresses?

  Read the article

• Windows 7 Pro - "domain" like login screen appeared

  - by Adrian

  I'm setting up a new PC with the Windows 7 Pro. After some actions (software installing, config changes, applying updates ), my login screen looks like the PC is connected to the domain: I have checked the settings and everywhere the "workgroup" is checked. I have been googling for three hours trying some solutions (Control UserPasswords2, regedit and the ".DEFAULT" key) but nothing works. I cannot see the user icons - only the login screen as above. I cannot also change the account icon. Has anybody seen such an issue?

  Read the article

• Looking for way to download all the free software I need to setup my PC all at once . . .

  - by Jim McKeeth

  I am in the middle of reinstalling Windows 7, and I would like to install all the software in as few steps as possible. I saw a web site recently that listed a lot of different Freeware and Opensource appliations. There was a checkmark next to each one so you could select the ones you want, and then they would all download in a single package to install at one time. The idea was for when you were setting up after a fresh install. It was for Windows and they were adding 64-bit applications.

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• How to make XP install ubuntu from USB?

  - by Apoorv

  I want to install ubuntu on my PC which is running windows XP right now. I have made my pen drive bootable and have loaded Ubuntu on it. When I insert the pen drive at the time of booting of my PC, nothing happens and windows XP starts normally instead of asking me if I want to boot from my pen drive. Also when, I entered my BIOS setting to change the boot order there was no option of pen drive as a boot device. Please suggest me a way to install the OS using my already made bootable pen drive. And there's no problem with my pen drive cause I have tried it on my friends PC and it worked normally. Thanks in advance

  Read the article

• Banshee doesn't like opening websites

  - by Allan

  I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

  Read the article

• Remote X-windows between new RHEL5 and old Solaris 8

  - by joshxdr

  I have a very small lab network with three boxes: a modern x86-based RHEL3 box, an x86-based RHEL5 box, and a 1998-vintage SPARC Ultra5 with Solaris 8. I can use ssh -X to run a program on the RHEL5 box and view the windows on the RHEL3 box. I believe this uses xauth and magic cookies?? I have followed the X-Windows HOWTO to set up xauth on the Solaris box, but so far no dice. I would like to be able to use the X-windows server on the RHEL3 box with a client program on the Solaris box (program running on Solaris host, windows appearing at Linux host). Is there a trick to this, or have I made a mistake following the instructions for setting up xauth and magic cookie?

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >