Search Results

Search found 13332 results on 534 pages for 'compatibility level'.

Page 313/534 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • Software Licencing [closed]

    - by Craig
    A colleague of mine wanted a means to do something, so it was suggested that I write some software to do this. The software has turned into more than the original specification and is now something rather complex, however it is not fully functional still. My colleague has not paid me anything so far and I am unwilling to continue writing the software until some faith has been reciprocated in my direction, as I have put a lot of effort into writing the software. I am also unwilling to finish the software as I do not want to give away a huge chunk of my time and effort away as free, neither do I want to be under compensated for my efforts. Some concerns I have. If I finish the software, what if the client doesn't pay me anything or pays too little, or what if I write the software to a usable level, but not complete and the client pays me a too little. I have lost my motivation to finish the software, as more and more specifications have been added to the software and I have developed a substantially complex piece of software and been effectively paid nothing. To finish the software, I need motivation, money would do this, however the client doesn't want to pay for something that isn't complete, yet keeps adding more requirements. I seem to be in a catch 22 with this, as I have developed some software on faith and have had no faith reciprocated in my direction. I'm really not sure how to get some payment from the client or on how to develop a licencing model so that I get some money from the client and development resumes.

    Read the article

  • Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

    - by user1622959
    A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

    Read the article

  • Public Solaris/SPARC roadmap until 2015

    - by Karim Berrah
    It now public, and give you a nice overview on what's going on, where Oracle is going with Solaris and SPARC processors. It's now available from here. What can we lean from this roadmap ? well, if you look carefully: Oracle is announcing Solaris 11 this year. The release date should be ... check OOW11 Solaris 10 updates should still be released in 2012 (remember, released in 2005). Check the Solaris lifecycle to understand how long is Solaris to stay side by side with Solaris 11. in 2011, a great 3x Single Strand improvement for the T-Series. Some thing great under preparation. Probably revealed at Oracle Open World 2011. Good news for ISVs ! in 2012, a great 6x Troughput improvement for the M-Serie ! How can this be done ? .... Nearly everything on the SPARC/SOLARIS level is said through the public roadmap,but as you know the evil is in the details ;)

    Read the article

  • Why is Ubuntu One slow to sync in 11.10, either backup or any sub-folder contents?

    - by pst007x
    I have been trying to sync my documents folder of 1.4GB, it still hasn't worked and it has been syncing for a month. The top level syncs, files and folders in the Document folders, but contents of sub-folders just hang. (Gave up and stopped syncing this folder) However,I have tried using the backup facility in 11.10, to backup to Ubuntu One.... I upgraded my HDD space in Ubuntu One. It has been going now for 24hours-ish and only backed up what looks like a couple of percent. (By the way what an excellent idea to backup to Ubuntu One, if only we could get it to actually work! :-o) The odd thing is I can sync to drop box within hours, rather than months. This is bad, and has been an issue since Ubuntu One's release. I have reported this problem and there were promises in later releases this would be fixed, but it hasn't. Canonical cannot help either... I posted on several blogs, a lot of people have the same problem but no fixes. So do I use dropbox or another service, until it is sorted, as Ubuntu does not seem to see this as an issue, I think a fix will be a long time in coming. (However,I love the potential of Ubuntu One and the integration with the OS) Yes my internet speeds are fine, etc... :-) No firewall (sudo ufw status: STATUS: INACTIVE), No Proxy, etc NB: I have raised this as a separate question to others posted here, because my question relates to Ubuntu 11.10, though I have commented elsewhere for help. Plus my question also relates to deja-dup backup to Ubuntu One. Thanks

    Read the article

  • How do I mount a CIFS share via FSTAB and give full RW to Guest

    - by Kendor
    I want to create a Public folder that has full RW access. The problem with my configuration is that Windows users have no issues as guests (they can RW and Delete), my Ubuntu client can't do the same. We can only write and read, but not create or delete. Here is the my smb.conf from my server: [global] workgroup = WORKGROUP netbios name = FILESERVER server string = TurnKey FileServer os level = 20 security = user map to guest = Bad Password passdb backend = tdbsam null passwords = yes admin users = root encrypt passwords = true obey pam restrictions = yes pam password change = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . add user script = /usr/sbin/useradd -m '%u' -g users -G users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' guest account = nobody syslog = 0 log file = /var/log/samba/samba.log max log size = 1000 wins support = yes dns proxy = no socket options = TCP_NODELAY panic action = /usr/share/samba/panic-action %d [homes] comment = Home Directory browseable = no read only = no valid users = %S [storage] create mask = 0777 directory mask = 0777 browseable = yes comment = Public Share writeable = yes public = yes path = /srv/storage The following FSTAB entry doesn't yield full R/W access to the share. //192.168.0.5/storage /media/myname/TK-Public/ cifs rw 0 0 This doesn't work either //192.168.0.5/storage /media/myname/TK-Public/ cifs rw,guest,iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0 Using the following location in Nemo/Nautilus w/o the Share being mounted does work: smb://192.168.0.5/storage/ Extra info. I just noticed that if I copy a file to the share after mounting, my Ubuntu client immediately make "nobody" be the owner, and the group "no group" has read and write, with everyone else as read-only. What am I doing wrong?

    Read the article

  • Congratulations to 2012 Innovation Award winners in BPM category

    - by Manoj Das
    Last year many of our customers went live on BPM 11g. It is my extreme pleasure to congratulate two of them – Amadeus and Navistar – for being awarded Oracle Fusion Middleware Innovation Award at Oracle OpenWorld 2012. We invited our customers to submit their most innovative BPM implementations that have delivered substantiated value to them. This year we saw more than 20 submissions from our customers seeing significant business value from their live BPM 11g deployments. The submissions came from across the world, spanning various industry verticals including manufacturing, healthcare, logistics, Hi-Tech, Public Sector, Education and covering many process usage patterns. Award submissions were evaluated based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. Amadeus Team Receiving Innovation Award from Hasan Rizvi Congratulations to Amadeus and Navistar and their teams on being recognized from among some very strong submissions and more importantly for the business value delivered. It is an honor to be part of your success and to play a small role in the innovation you drive. Navistar is a leading truck manufacturing company which produces International® brand commercial and military trucks, MaxxForce® brand diesel engines, IC Bus™ brand school and commercial buses, and Navistar RV brands of recreational vehicles. The company also provides truck and diesel engine service parts. Amadeus is a leading transaction processor for the global travel and tourism industry, providing transaction processing power and technology solutions to both travellers and travel providers. Both Navistar and Amadeus have leveraged Oracle BPM Suite to improve visibility into their business and made their business more agile and efficient. We congratulate them again and wish them continued success in their business and future BPM initiatives.

    Read the article

  • How to determine if a 3D voxel-based room is sealed, efficiently

    - by NigelMan1010
    I've been having some issues with efficiently determining if large rooms are sealed in a voxel-based 3D rooms. I'm at a point where I have tried my hardest to solve the problem without asking for help, but not tried enough to give up, so I'm asking for help. To clarify, sealed being that there are no holes in the room. There are oxygen sealers, which check if the room is sealed, and seal depending on the oxygen input level. Right now, this is how I'm doing it: Starting at the block above the sealer tile (the vent is on the sealer's top face), recursively loop through in all 6 adjacent directions If the adjacent tile is a full, non-vacuum tile, continue through the loop If the adjacent tile is not full, or is a vacuum tile, check if it's adjacent blocks are, recursively. Each time a tile is checked, decrement a counter If the count hits zero, if the last block is adjacent to a vacuum tile, return that the area is unsealed If the count hits zero and the last block is not a vacuum tile, or the recursive loop ends (no vacuum tiles left) before the counter is zero, the area is sealed If the area is not sealed, run the loop again with some changes: Checking adjacent blocks for "breathable air" tile instead of a vacuum tile Instead of using a decrementing counter, continue until no adjacent "breathable air" tiles are found. Once loop is finished, set each checked block to a vacuum tile. Here's the code I'm using: http://pastebin.com/NimyKncC The problem: I'm running this check every 3 seconds, sometimes a sealer will have to loop through hundreds of blocks, and a large world with many oxygen sealers, these multiple recursive loops every few seconds can be very hard on the CPU. I was wondering if anyone with more experience with optimization can give me a hand, or at least point me in the right direction. Thanks a bunch.

    Read the article

  • Ranking players depending on decision making during a game

    - by tabchas
    How would I go about a ranking system for players that play a game? Basically, looking at video games, players throughout the game make critical decisions that ultimately impact the end game result. Is there a way or how would I go about a way to translate some of those factors (leveling up certain skills, purchasing certain items, etc.) into something like a curve that can be plotted on a graph? This game that I would like to implement this is League of Legends. Example: Player is Level 1 in the beginning. Gets a kill very early in the game (he gets gold because of the kill and it increases his "power curve"), and purchases attack damage (gives him more damage which also increases his "power curve". However, the player that he killed (Player 2), buys armor (counters attack damage). This slightly increases Player 2's own power curve, and reduces Player 1's power curve. There's many factors I would like to take into account. These relative factors (example: BECAUSE Player 2 built armor, and I am mainly attack damage, it lowers my OWN power curve) seem the hardest to implement. My question is this: Is there a certain way to approach this task? Are there similar theoretical concepts behind ranking systems that I should read up on? I've seen the ELO system, but it doesn't seem what I want since it simply takes into account wins and losses.

    Read the article

  • Usual Suspects: Typical 3rd Party Entities in E-Commerce [closed]

    - by zharvey
    I am doing some requirements/analysis for a web app that I'd like to build (Ruby/Java developer here). This web app would have a store front, shopping cart and would need to be totally compliant with all e-com best practices. It's amazing how much non-technical info comes up when you search for phrases like "how does e-commerce work", but very little comes up in the way of technical details. As such, I'm having extreme frustration finding answers to what I consider pretty straight-forward questions. I came here because I believe this question is not off-topic; if it is, please leave a comment as to why this question does not belong here and I will happily remove it myself (upvotes if your comment can point me to the correct place for this question!). So then: What 3rd parties will I need to work with to have a modern, web-compliant e-com site? So far I can account for a payment gateway provider like Authorize.net and an SSL certificate provider like Trustwave. Any others? What other standards besides PCI compliance will I be held to (besides governing laws, of course!)? Vulnerability scans: PCI compliance requires quarterly scans: if I'm a "Level 4" (low volume) Merchant does that still apply to me? Irregardless, my backend architecture is quite huge, with web servers, app servers, database, message brokers and more. Do each of these servers need to be scanned?!? If not what servers do need to get these quarterly scans? I usually hate to ask micro-questions inside of one large one, but these are so closely-related I just felt like asking them all separately would be spamming the site with too many petty questions. Thanks in advance!

    Read the article

  • screen does not wake up after suspend/ brightness will not adjust

    - by Nathan
    My computer is one of these: http://www.newegg.com/Product/Product.aspx?Item=N82E16834230467 Asus Zenbook UX32A-DB51 Just bought it yesterday. Set to "suspend" when I close the lid, but when I open it up again I just get a black screen. Pressing the power button doesn't work, not does clicking the mouse or any key combination. The same is true if I leave the computer until it suspends. Black screen, no response, have to reboot. I also can't seem to adjust the brightness. I put "brightness up" and "brightness down" function keys in, and when I push them it shows the brightness level as going up and down on the meter, but the screen does not actually become more or less bright. I am totally new to all of this. Please tell me what additional information you need to help me and where I can find it. Thanks! Edit: Tried the following: sudo gedit /etc/default/grub Change the line GRUB_CMDLINE_LINUX="" into GRUB_CMDLINE_LINUX="acpi_osi=Linux" sudo update-grub Restart your linux And "acpi_backlight=vendor" both to no avail.

    Read the article

  • Project Jigsaw: Late for the train: The Q&A

    - by Mark Reinhold
    I recently proposed, to the Java community in general and to the SE 8 (JSR 337) Expert Group in particular, to defer Project Jigsaw from Java 8 to Java 9. I also proposed to aim explicitly for a regular two-year release cycle going forward. Herewith a summary of the key questions I’ve seen in reaction to these proposals, along with answers. Making the decision Q Has the Java SE 8 Expert Group decided whether to defer the addition of a module system and the modularization of the Platform to Java SE 9? A No, it has not yet decided. Q By when do you expect the EG to make this decision? A In the next month or so. Q How can I make sure my voice is heard? A The EG will consider all relevant input from the wider community. If you have a prominent blog, column, or other communication channel then there’s a good chance that we’ve already seen your opinion. If not, you’re welcome to send it to the Java SE 8 Comments List, which is the EG’s official feedback channel. Q What’s the overall tone of the feedback you’ve received? A The feedback has been about evenly divided as to whether Java 8 should be delayed for Jigsaw, Jigsaw should be deferred to Java 9, or some other, usually less-realistic, option should be taken. Project Jigsaw Q Why is Project Jigsaw taking so long? A Project Jigsaw started at Sun, way back in August 2008. Like many efforts during the final years of Sun, it was not well staffed. Jigsaw initially ran on a shoestring, with just a handful of mostly part-time engineers, so progress was slow. During the integration of Sun into Oracle all work on Jigsaw was halted for a time, but it was eventually resumed after a thorough consideration of the alternatives. Project Jigsaw was really only fully staffed about a year ago, around the time that Java 7 shipped. We’ve added a few more engineers to the team since then, but that can’t make up for the inadequate initial staffing and the time lost during the transition. Q So it’s really just a matter of staffing limitations and corporate-integration distractions? A Aside from these difficulties, the other main factor in the duration of the project is the sheer technical difficulty of modularizing the JDK. Q Why is modularizing the JDK so hard? A There are two main reasons. The first is that the JDK code base is deeply interconnected at both the API and the implementation levels, having been built over many years primarily in the style of a monolithic software system. We’ve spent considerable effort eliminating or at least simplifying as many API and implementation dependences as possible, so that both the Platform and its implementations can be presented as a coherent set of interdependent modules, but some particularly thorny cases remain. Q What’s the second reason? A We want to maintain as much compatibility with prior releases as possible, most especially for existing classpath-based applications but also, to the extent feasible, for applications composed of modules. Q Is modularizing the JDK even necessary? Can’t you just put it in one big module? A Modularizing the JDK, and more specifically modularizing the Java SE Platform, will enable standard yet flexible Java runtime configurations scaling from large servers down to small embedded devices. In the long term it will enable the convergence of Java SE with the higher-end Java ME Platforms. Q Is Project Jigsaw just about modularizing the JDK? A As originally conceived, Project Jigsaw was indeed focused primarily upon modularizing the JDK. The growing demand for a truly standard module system for the Java Platform, which could be used not just for the Platform itself but also for libraries and applications built on top of it, later motivated expanding the scope of the effort. Q As a developer, why should I care about Project Jigsaw? A The introduction of a modular Java Platform will, in the long term, fundamentally change the way that Java implementations, libraries, frameworks, tools, and applications are designed, built, and deployed. Q How much progress has Project Jigsaw made? A We’ve actually made a lot of progress. Much of the core functionality of the module system has been prototyped and works at both compile time and run time. We’ve extended the Java programming language with module declarations, worked out a structure for modular source trees and corresponding compiled-class trees, and implemented these features in javac. We’ve defined an efficient module-file format, extended the JVM to bootstrap a modular JRE, and designed and implemented a preliminary API. We’ve used the module system to make a good first cut at dividing the JDK and the Java SE API into a coherent set of modules. Among other things, we’re currently working to retrofit the java.util.ServiceLoader API to support modular services. Q I want to help! How can I get involved? A Check out the project page, read the draft requirements and design overview documents, download the latest prototype build, and play with it. You can tell us what you think, and follow the rest of our work in real time, on the jigsaw-dev list. The Java Platform Module System JSR Q What’s the relationship between Project Jigsaw and the eventual Java Platform Module System JSR? A At a high level, Project Jigsaw has two phases. In the first phase we’re exploring an approach to modularity that’s markedly different from that of existing Java modularity solutions. We’ve assumed that we can change the Java programming language, the virtual machine, and the APIs. Doing so enables a design which can strongly enforce module boundaries in all program phases, from compilation to deployment to execution. That, in turn, leads to better usability, diagnosability, security, and performance. The ultimate goal of the first phase is produce a working prototype which can inform the work of the Module-System JSR EG. Q What will happen in the second phase of Project Jigsaw? A The second phase will produce the reference implementation of the specification created by the Module-System JSR EG. The EG might ultimately choose an entirely different approach than the one we’re exploring now. If and when that happens then Project Jigsaw will change course as necessary, but either way I think that the end result will be better for having been informed by our current work. Maven & OSGi Q Why not just use Maven? A Maven is a software project management and comprehension tool. As such it can be seen as a kind of build-time module system but, by its nature, it does nothing to support modularity at run time. Q Why not just adopt OSGi? A OSGi is a rich dynamic component system which includes not just a module system but also a life-cycle model and a dynamic service registry. The latter two facilities are useful to some kinds of sophisticated applications, but I don’t think they’re of wide enough interest to be standardized as part of the Java SE Platform. Q Okay, then why not just adopt the module layer of OSGi? A The OSGi module layer is not operative at compile time; it only addresses modularity during packaging, deployment, and execution. As it stands, moreover, it’s useful for library and application modules but, since it’s built strictly on top of the Java SE Platform, it can’t be used to modularize the Platform itself. Q If Maven addresses modularity at build time, and the OSGi module layer addresses modularity during deployment and at run time, then why not just use the two together, as many developers already do? A The combination of Maven and OSGi is certainly very useful in practice today. These systems have, however, been built on top of the existing Java platform; they have not been able to change the platform itself. This means, among other things, that module boundaries are weakly enforced, if at all, which makes it difficult to diagnose configuration errors and impossible to run untrusted code securely. The prototype Jigsaw module system, by contrast, aims to define a platform-level solution which extends both the language and the JVM in order to enforce module boundaries strongly and uniformly in all program phases. Q If the EG chooses an approach like the one currently being taken in the Jigsaw prototype, will Maven and OSGi be made obsolete? A No, not at all! No matter what approach is taken, to ensure wide adoption it’s essential that the standard Java Platform Module System interact well with Maven. Applications that depend upon the sophisticated features of OSGi will no doubt continue to use OSGi, so it’s critical that implementations of OSGi be able to run on top of the Java module system and, if suitably modified, support OSGi bundles that depend upon Java modules. Ideas for how to do that are currently being explored in Project Penrose. Java 8 & Java 9 Q Without Jigsaw, won’t Java 8 be a pretty boring release? A No, far from it! It’s still slated to include the widely-anticipated Project Lambda (JSR 335), work on which has been going very well, along with the new Date/Time API (JSR 310), Type Annotations (JSR 308), and a set of smaller features already in progress. Q Won’t deferring Jigsaw to Java 9 delay the eventual convergence of the higher-end Java ME Platforms with Java SE? A It will slow that transition, but it will not stop it. To allow progress toward that convergence to be made with Java 8 I’ve suggested to the Java SE 8 EG that we consider specifying a small number of Profiles which would allow compact configurations of the SE Platform to be built and deployed. Q If Jigsaw is deferred to Java 9, would the Oracle engineers currently working on it be reassigned to other Java 8 features and then return to working on Jigsaw again after Java 8 ships? A No, these engineers would continue to work primarily on Jigsaw from now until Java 9 ships. Q Why not drop Lambda and finish Jigsaw instead? A Even if the engineers currently working on Lambda could instantly switch over to Jigsaw and immediately become productive—which of course they can’t—there are less than nine months remaining in the Java 8 schedule for work on major features. That’s just not enough time for the broad review, testing, and feedback which such a fundamental change to the Java Platform requires. Q Why not ship the module system in Java 8, and then modularize the platform in Java 9? A If we deliver a module system in one release but don’t use it to modularize the JDK until some later release then we run a big risk of getting something fundamentally wrong. If that happens then we’d have to fix it in the later release, and fixing fundamental design flaws after the fact almost always leads to a poor end result. Q Why not ship Jigsaw in an 8.5 release, less than two years after 8? Or why not just ship a new release every year, rather than every other year? A Many more developers work on the JDK today than a couple of years ago, both because Oracle has dramatically increased its own investment and because other organizations and individuals have joined the OpenJDK Community. Collectively we don’t, however, have the bandwidth required to ship and then provide long-term support for a big JDK release more frequently than about every other year. Q What’s the feedback been on the two-year release-cycle proposal? A For just about every comment that we should release more frequently, so that new features are available sooner, there’s been another asking for an even slower release cycle so that large teams of enterprise developers who ship mission-critical applications have a chance to migrate at a comfortable pace.

    Read the article

  • Setting up a shared media drive

    - by Sam Brightman
    I want to have a shared media drive be transparently usable to all users, whilst also sticking to FHS and Ubuntu standards. The former takes priority if necessary. I currently mount it at /media/Stuff but /media is supposed to be for external media, I believe. The main issue is setting permissions so that access to read and write to the drive can be granted to multiple users working within the same directories. InstallingANewHardDrive seems both slightly confused and not what I want. It claims that this sets ownership for the top-level directory (despite the recursion flag): sudo chown -R USERNAME:USERNAME /media/mynewdrive And that this will let multiple users create files and sub-directories but only delete their own: sudo chgrp plugdev /media/mynewdrive sudo chmod g+w /media/mynewdrive sudo chmod +t /media/mynewdrive However, the group writeable bit does not seem to get inherited, which is troublesome for keeping things organised (prevents creation inside sub-folders originally made by another user). The sticky bit is probably also unwanted for the same reason, although currently it seems that one userA (perhaps the owner of the mount-point?) can delete the userB's files, but not vice-versa. This is fine, as long as userB can create files inside the directory of userA. So: What is the correct mount point? Is plugdev the correct group? Most importantly, how to set up permissions to maintain an organised media drive? I do not want to be running cron jobs to set permissions regularly!

    Read the article

  • what languages are good selling points on resume? [closed]

    - by Thomas Galvin
    I have a good amount of experience with C# and Java at the moment but after education and whatnot I wish to be able in more than just 2 high-level, comparatively limited languages, and from what I've seen languages like C(++) or PHP are in demand at the moment. I've thought about learning the following: C. Very standard, lightweight and available on everything. However very old and mostly procedural. C++. Standard like C but I've read in some places that it encourages bad programming design and use of dodgy libraries - but similar things have been said about C too so I'll take that with a grain of salt. D. Quite new but looks promising, but will it be relevant or applicable in the future though? PHP. With the internet becoming ever more important I think this might be the one to go with, but the code itself isn't very intuitive. CoffeeScript (or plain JavaScript). With Microsoft's new idea of HTML5+JS for everything under the sun this doesn't look like a bad choice. However things do change and I wish to be primarily a software dev, not web dev. So out of the above list, or any others that you could suggest, what would you say I should begin to focus on? What is your opinion on staying with C#?

    Read the article

  • How do you price your work?

    - by Dr.Kameleon
    Well, let me explain : This has really been an issue for me, for such a long time. And what is worse - since coding is something I simply ADORE (I would definitely do it, even if there was no payment involved whatsoever..) - is that I always end up feeling somewhat awkward... Anyway... So, here's the deal : You start working on a project, you may have something in your mind, and even if you're lucky enough and the client needs no "cost estimates" beforehand, sooner or later you'll face the ultimate dilemma of pricing your own work. So, how do YOU do it? By estimating the time you put into it? (obviously, this is not exact, 'coz perhaps a more capable coder will need much less time for the very same thing than a not-so-competent coder + even the very same coder may not "perform" equally at all times) By the Lines of code you've written? (obviously, this is not a measure either : a 10-line script that does exactly the same with a 1000-line script is, at least for me, "better") By taking into account the level of complexity of the project and, perhaps, how specialised the subject is? By taking into account other factors? (e.g. the value of the project for your customer)

    Read the article

  • Windows Physical Direct Memory Mapping

    - by chrisjleaf
    I'm a bit disappointed there is almost no discussion of this no matter where I look so I guess I'll have to ask. I'm writing a cross platform memory bench marking application which requires direct physical address mapping rather than virtual addressing. EDIT The solution would look something like the Linux/Unix system calls: int fd = open("/dev/mem", O_RDONLY); mmap(NULL, len, PROT_READ, MAP_SHARED, fd, PHYSICAL_ADDRESS_OFFSET); which will require the kernel to either give you a virtual page mapping to the desired physical address or return that it failed. This does require supervisor privileges but that is ok. I have seen a lot of information about shared memory and memory mapped files but all of these reside on disc and are thus not really useful when I'm trying to make a system dependent read. It is very similar to writing an IO driver although I do no need write permissions to the physical address. This site gives an example of how to do it on a driver level using the Windows Driver Kit: NT Insider: Sharing Memory between drivers and applications This solution would probably require Visual Studio which currently I do not have access to. (I have downloaded the WDK api but it complained about my use of GCC for Windows). I'm traditionally a Linux programmer so I'm hoping there might be something really simple I'm missing. Thanks in advance if you know something I don't!

    Read the article

  • Why should I use MSBuild instead of Visual Studio Solution files?

    - by Sid
    We're using TeamCity for continuous integration and it's building our releases via the solution file (.sln). I've used Makefiles in the past for various systems but never msbuild (which I've heard is sorta like Makefiles + XML mashup). I've seen many posts on how to use msbuild directly instead of the solution files but I don't see a very clear answer on why to do it. So, why should we bother migrating from solution files to an MSBuild 'makefile'? We do have a a couple of releases that differ by a #define (featurized builds) but for the most part everything works. The bigger concern is that now we'd have to maintain two systems when adding projects/source code. UPDATE: Can folks shed light on the lifecycle and interplay of the following three components? The Visual Studio .sln file The many project level .csproj files (which I understand an "sub" msbuild scripts) The custom msbuild script Is it safe to say that the .sln and .csproj are consumed/maintained as usual from within the Visual Studio IDE GUI while the custom msbuild script is hand-written and usually consumes the already existing individual .csproj "as-is"? That's one way I can see reduce overlap/duplicate in maintenance... Would appreciate some light on this from other folks' operational experience

    Read the article

  • Strategy for versioning on a public repo

    - by biril
    Suppose I'm developing a (javascript) library which is hosted on a public repo (e.g. github). My aim in terms of how version numbers are assigned and incremented is to follow the guidelines of semantic versioning. Now, there's a number of files in my project which compose the actual lib and a number of files that 'support it', the latter being docs, a test suite, etc. My perspective this far has been that version numbers should only apply to the actual lib - not the project as a whole - since the lib alone is 'the unit' that defines the public API. However I'm not satisfied with this approach as, for example, a fix in the test suite constitutes an 'improvement' in my project, which will not be reflected in the version number (or the docs which contain a reference to it). On a more practical level, various tools, such as package managers, may (understandably) not play along with this strategy. For example, when trying to publish a change which is not reflected in the version number, npm publish fails with the suggestion "Bump the 'version' field set the --force flag, or npm unpublish". Am I doing it wrong?

    Read the article

  • Am I programming too slow?

    - by Jonn
    I've only been a year in the industry and I've had some problems making estimates for specific tasks. Before you close this, yes, I've already read this: http://programmers.stackexchange.com/questions/648/how-to-respond-when-you-are-asked-for-an-estimate and that's about the same problem I'm having. But I'm looking for a more specific gauge of experiences, something quantifiable or probably other programmer's average performances which I should aim for and base my estimates. The answers range from weeks, and I was looking more for an answer on the level of a task assigned for a day or so. (Note that this doesn't include submitting for QA or documentations, just the actual development time from writing tests if I used TDD, to making the page, before having it submitted to testing) My current rate right now is as follows (on ASP.NET webforms): Right now, I'm able to develop a simple data entry page with a grid listing (no complex logic, just Creating and Reading) on an already built architecture, given one full day's (8 hours) time. Adding complex functionality, and Update and Delete pages add another full day to the task. If I have to start the page from scratch (no solution, no existing website) it takes me another full day. (Not always) but if I encounter something new or haven't done yet it takes me another full day. Whenever I make an estimate that's longer than the expected I feel that others think that I'm lagging a lot behind everyone else. I'm just concerned as there have been expectations that when it's just one page it should take me no more than a full day. Yes, there definitely is more room for improvement. There always is. I have a lot to learn. But I would like to know if my current rate is way too slow, just average, or average for someone no longer than a year in the industry.

    Read the article

  • A (slight) Change of Focus

    - by StuartBrierley
    When I started this blog in September 2009 I was working as a BizTalk developer for a financial institution based in the South West of England.  At the time I was developing using BizTalk Server 2004 and intended to use my blog to collate and share any useful information and experiences that I had using this version of BizTalk (and occasionally other technologies) in an effort to bring together as many useful details as I could in one place. Since then my circumstances have changed and I am no longer working in the financial industry using BizTalk 2004.  Instead I have recently started a new post in the logistics industry, in the North of England, as "IT Integration Manager".  The company I now work for has identified a need to boost their middleware/integration platform and have chosen BizTalk Server 2009 as their platform of choice; this is where I come in. To start with my role is to provide the expertise with BizTalk that they currently lack, design and direct the initial BizTalk 2009 implementation and act as lead developer on all pending BizTalk projects.  Following this it is my hope that we will be able to build on the initial BizTalk "proof of concept" and eventually implement a fully robust enterprise level BizTalk 2009 environment. As such, this blog is going to see a shift in focus from BizTalk 2004 to BizTalk 2009 and at least initially is likely to include posts on the design and installation of our BizTalk environment - assuming of course that I have the time to write them! The last post I made was the start of a chapter by chapter look at the book SOA Patterns with BizTalk Server 2009.  Due to my change of job I am currently "paused" half way through this book, and my lack of posts on the subject are directly as a result of the job move and the pending relocation of my family.  I am hoping to write about my overall opinion of this book sometime soon; so far it certainly looks like it will be a positive one. Thanks for reading; I'm off to manage some integration.

    Read the article

  • "The protocol 'net.msmq' is not supported."

    - by Randolpho St. John
    OMG, a new lesson! Will wonders never cease? So I ran into an interesting issue setting up a WCF service to consume an MSMQ queue. I won't bother you with the details of how to actually build a WCF/MSMQ service; there are plenty of tutorials on the subject. I want to share with you an interesting error that I ran into and the surprisingly simple fix. The error occurs when attempting to generate a Service Reference or even simply browsing to the WSDL of your WCF/MSMQ service in the form of a YSOD with the following error: "The protocol 'net.msmq' is not supported." After a lot of Googling on the subject turning up plenty of questions with the same error but no answers. So I went digging into some application level config files on a server that already had a WCF/MSMQ service successfully set up by the network admin, and the answer was amazingly simple: If you are hosting an MSMQ/WCF service in IIS, you have to tell IIS to allow net.msmq protocol. It's in the advanced settings for the application or site in which you are hosting the service. .... aaaand, that's it.

    Read the article

  • Gain More From Your Oracle Investments

    - by Oracle OpenWorld Blog Team
    By Yaldah Hakim, Oracle Managed Cloud ServicesOracle Managed Cloud Services enables organizations to leverage their Oracle investments by extending them into the cloud—for greater value, choice, and confidence. At Oracle OpenWorld, Oracle Managed Cloud Services has numerous activities and educational sessions planned so you can explore how your organization will benefit from the power of Oracle software and hardware in the cloud.Here are just a few of the Oracle Managed Cloud Services breakout sessions you can attend Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} : Moving into the Cloud with Oracle Cloud Services Upgrade your Oracle Applications into the Cloud Cloud Services: Security and Compliance in the Cloud  And don’t forget to check out the Oracle Cloud Services Lounge at Moscone West Level 3, where you can schedule one-on-one meetings with the cloud services experts.  Lounge Hours:Monday, October 1: 10:00 a.m. - 6:00 p.m.Tuesday, October 2: 10:00 a.m. - 6:00 p.m.Wednesday, October 3: 10:00 a.m. - 4:00 p.m.Thursday, October 4: 10:00 a.m. - 2:00 p.m. For a schedule of all Managed Cloud Services activities at Oracle OpenWorld, go here.

    Read the article

  • You wouldn&rsquo;t drink 9 year old milk would you?

    - by Jim Duffy
    This is an absolutely brilliant campaign to urge users that its time to move on from IE 6. I like how it puts it terms that everyone can understand and has probably experienced at one time or another. How many times have you opened the milk, took a sniff, and experienced that visceral reaction that accompanies catching a whiff of milk that has turned to the dark side of the force? I call it Darth Vader milk. :-) Of course I’m assuming that you haven’t used IE 6 for a long time now. It is our responsibility as information technology workers to communicate to our friends and family how lame using IE 6 is. Shame them into upgrading if necessary. I don’t care how you get through to them but get through. Tell them that only losers use IE 6. Tell them you’ll cut them out of the your will. Tell them they’re banned from your annual BBQ blowout. Tell them that [insert their favorite celebrity’s name here] thinks people using IE6 are losers.  :-) Seriously, IE6 sucks and blows at the same time and has got to go for a number of reasons including the security leaks that come with using it. Confidentially, I urge them to upgrade for purely selfish reasons. Because I am the first level of computer support for waaaaaay to many of my family members I always advocate they use a current browser (IE 8 or Firefox) and anti-virus software (AVG). Call me selfish but I’d rather not waste my time dealing with a virus or malware that could potentially slip through with IE6. Yes, I’m selfish with my time that way. :-) Have a day. :-|

    Read the article

  • Is there a cheaper non-express non-student, non-msdn version of Visual Studio 2010 that supports plugins in the US than the $710 Professional Edition?

    - by Justin Dearing
    I've never actually purchased a copy of Visual Studio myself. SharpDevelop and Express edition have always been good enough for my personal use, and my employers always furnished me with the IDEs I needed to serve them. However, I'm thinking of actually paying for a copy for my personal laptop. I need this mainly so I can open solutions that contain web projects. So my question is: Is there an edition cheaper than the $710 Pro edition on Amazon that will do what I need: http://www.amazon.com/Microsoft-C5E-00521-Visual-Studio-Professional/dp/B0038KTO8S/ref=sr_1_2?ie=UTF8&qid=1287456230&sr=8-2 ? What I need is defined as: Open up a solution with C#, Web App, VB.NET, and Web Projects. Install addins like resharper, testdriven.net, etc, SCM plugins, etc. Some level of db project support. At least to be able to open a dbproj. I only need that for SCM hooks. SSMS and SQLCMD are good enough for actually editing databases. Ability to install F#, IronPython, IronRuby etc. Now naturally I'm a fairly intelligent resourceful person so I realize I can get Visual Studio in a questionable manner. Thats not what I'm looking to do. I want a legal copy, I don't want a student copy, or an MSDN copy. I want a real copy, I just want to make sure I get the cheapest edition that serves my needs.

    Read the article

  • Fusion Applications Announces the Online Feature Query Tool

    - by Richard Lefebvre
    Fusion Applications Development is pleased to announce the availability of a new, online tool for viewing Fusion Features. Oracle Product Features allows you to view new features in Fusion across multiple releases, families and products. You can view online or download the data in a variety of formats, including pdf and xls. This easy-to-use tool covers the same content and therefore replaces the pdf versions of the What's New documents. You can access Oracle Product Features from the Fusion Learning Center under Featured Assets > Product Features Query Tool. It can also be found under Release Readiness > Release Overview. Oracle Product Features will be available to customers and Partners from MyOracleSupport, oracle.com and the Partner Network Fusion Learning Center in the near future.  Oracle Product Features provides you with a high level of flexibility allowing you to only see the content you want, whether it is for a single Fusion product family, such as Human Capital Management (HCM), across several releases, or to view the entire listing of new features.  Content currently incorporates all new features introduced in Releases 3, 4 and 5. Release 6 content will be added in the near future.

    Read the article

  • The Start of a Blog

    - by dbradley
    So, here's my new blog up and running, who am I and what am I planning to write here?First off - here's a little about me:I'm a recent graduate from university (coming up to a year ago since I finished) studying Software Engineering on a four year course where the third year was an industrial placement. During the industrial placement I went to work for a company called Adfero in a "Technical Consultant" role as well as a junior "Information Systems Developer". Once I completed my placement I went back to complete my final year but also continued in my developer role 2/3 days a week with the company.Working part time while at uni always seems like a great idea until you get half way through the year. For me the problem was not so much having a lack of time, but rather a lack of interest in the course content having got a chance at working on real projects in a live environment. Most people who have been graduated a little while also find this - when looking back at uni work, it seem to be much more trivial from a problem solving point of view which I found to be true and I found key to uni work to actually be your ability to prove though how you talk about something that you comprehensively understand the basics.After completing uni I then returned full time to Adfero purely in the developer role which is where I've now been for almost a year and have now also taken on the title of "Information Systems Architect" where I'm working on some of the more high level design problems within the products.What I'm wanting to share on this blog is some of the interesting things I've learnt myself over the last year, the things they don't teach you in uni and pretty much anything else I find interesting! My personal favorite areas are text indexing, search and particularly good software engineering design - good design combined with good code makes the first step towards a well-written, maintainable piece of software.Hopefully I'll also be able to share a few of the products I've worked on, the mistake I've made and the software problems I've inherited from previous developers and had to heavily re-factor.

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >