Search Results

Search found 11015 results on 441 pages for 'explain plan'.

Page 313/441 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • Low level programming - what's in it for me?

    - by back2dos
    For years I have considered digging into what I consider "low level" languages. For me this means C and assembly. However I had no time for this yet, nor has it EVER been neccessary. Now because I don't see any neccessity arising, I feel like I should either just schedule some point in time when I will study the subject or drop the plan forever. My Position For the past 4 years I have focused on "web technologies", which may change, and I am an application developer, which is unlikely to change. In application development, I think usability is the most important thing. You write applications to be "consumed" by users. The more usable those applications are, the more value you have produced. In order to achieve good usability, I believe the following things are viable Good design: Well-thought-out features accessible through a well-thought-out user interface. Correctness: The best design isn't worth anything, if not implemented correctly. Flexibility: An application A should constantly evolve, so that its users need not switch to a different application B, that has new features, that A could implement. Applications addressing the same problem should not differ in features but in philosophy. Performance: Performance contributes to a good user experience. An application is ideally always responsive and performs its tasks reasonably fast (based on their frequency). The value of performance optimization beyond the point where it is noticeable by the user is questionable. I think low level programming is not going to help me with that, except for performance. But writing a whole app in a low level language for the sake of performance is premature optimization to me. My Question What could low level programming teach me, what other languages wouldn't teach me? Am I missing something, or is it just a skill, that is of very little use for application development? Please understand, that I am not questioning the value of C and assembly. It's just that in my everyday life, I am quite happy that all the intricacies of that world are abstracted away and managed for me (mostly by layers written in C/C++ and assembly themselves). I just don't see any concepts, that could be new to me, only details I would have to stuff my head with. So what's in it for me? My Conclusion Thanks to everyone for their answers. I must say, nobody really surprised me, but at least now I am quite sure I will drop this area of interest until any need for it arises. To my understanding, writing assembly these days for processors as they are in use in today's CPUs is not only unneccesarily complicated, but risks to result in poorer runtime performance than a C counterpart. Optimizing by hand is nearly impossible due to OOE, while you do not get all kinds of optimizations a compiler can do automatically. Also, the code is either portable, because it uses a small subset of available commands, or it is optimized, but then it probably works on one architecture only. Writing C is not nearly as neccessary anymore, as it was in the past. If I were to write an application in C, I would just as much use tested and established libraries and frameworks, that would spare me implementing string copy routines, sorting algorithms and other kind of stuff serving as exercise at university. My own code would execute faster at the cost of type safety. I am neither keen on reeinventing the wheel in the course of normal app development, nor trying to debug by looking at core dumps :D I am currently experimenting with languages and interpreters, so if there is anything I would like to publish, I suppose I'd port a working concept to C, although C++ might just as well do the trick. Again, thanks to everyone for your answers and your insight.

    Read the article

  • OTN Latinoamérica Tour 2012

    - by Dana Singleterry
    Better late than never. Sorry for the delay on getting this content up for all of you and thanks again for your attendance. A number of excellent questions came out of the sessions I delivered and herein I'm providing you with the content, in pdf format, for those sessions. I'm also providing pointers to Forms to ADF integration/migration as well as some details around OAF as used in E-Business Suite and ADF. Here's the sessions delivered by location. Click on any of the links to download the session content in pdf format. Montevideo Uruguay: Is Oracle ADF Simpler than Oracle Forms? Understanding the Fusion Development Platform Building Web Data Dashboards Without Coding Buenos Aires, Argentina: Is Oracle ADF Simpler than Oracle Forms? Developing Cross Device Mobile Applications Sao Paulo, Brazil Understanding the Fusion Development Platform Is Oracle ADF Simpler than Oracle Forms? A brief note on Form Integration & Migration: Does your organization have an Oracle Forms application that you'd like to migrate to ADF? Or, perhaps you're an Oracle Forms Developer and want to modernize your application development skills? If so, you've come to the right place! This section will strive to answer common questions that arise as you move from Forms to ADF. Our Oracle Forms Statement of Direction points out that Oracle is committed to the long-term support of Oracle Forms and Reports. However, many customers feel they are outgrowing their Forms applications. Users are demanding more sophisticated and interactive users interfaces. Executives are requiring SOA-enabled applications that integrate with peripheral services. Development leads are encouraging a more modern approach to application development, including adherence to design patterns like MVC. So even as Oracle still supports Forms, the list of reasons to move off of it is becoming more compelling and is only gaining further momentum by the fact that Oracle's own Fusion Applications are using ADF. Developers and organizations looking to align with both the technology stack and look-and-feel of Fusion Applications are choosing ADF, and thus reaping the benefits of years of best practices in enterprise application development that are baked into the ADF framework. So, if you decide to migrate off of Forms for any of these reasons, ADF is the way to go. Grant Ronald has published a video of our position on the subject, along with an ODTUG article explaining our direction. These materials explain that there are other migration tools/frameworks/paths, but the best choice is usually to follow Gartner's recommendation that if you are going to migrate off of Oracle Forms, ADF is the least risky and least costly migration path. Please visit the Oracle Forms page here. For details around OAF as used in E-Business Suite (EBS) and when to use ADF with EBS you can review the following blogs from Shay Shmeltzer. To ADF or to OAF? or Can I use ADF with Oracle E-Business Suite?

    Read the article

  • The Value of SOA Specialization - Fujitsu

    - by Jürgen Kress
    Thanks for the nice ink The Value of Specialization In my last post  I talked about Fujitsu's achievement in obtaining SOA and other specializations, but I have heard murmurings from other partners about what just is the value? I think Oracle have to do more to advertise the benefits to customers, we need to see customers asking for specialization for it to really work, but Oracle have made great promises about only recommending those partners who are specialized. For us there was another benefit. Oracle was sponsoring the 3rd Annual SOA Symposium in Berlin and invited us as their first specialized partner to take part. There is a great blog about the symposium on the SOA community blog site. This is real commitment from Oracle and we have other marketing opportunities being worked on with Jürgen. This does generate leads so my message to other Oracle Partners is, you need to do this, it is worthwhile.   Fujitsu - First SOA Specialized Partner Globally Just before Oracle Open World I found out that Fujitsu had achieved the first SOA Specialization globally. I think most partners know what the requirements are for Specialization and that in itself is challenging but the bureaucracy around the actual submission is an exercise in tenacity. I won’t go into that now; I have had my dig at Oracle this month, but enough to say the process could be improved. As a platinum partner we needed 5 specializations and we decided to go for SOA first. The reasoning behind this is that our Oracle Practice is known for being applications centric. We have always had an excellent technical capability but no one ever talked about that, it was just part and parcel of an implementation. However today we have just as many bids that are technology lead as there is applications lead, so it seemed a good plan to work on the areas we were not known for. We appointed a capability lead to be responsible for putting the team through the training and testing and Rosemary (Kell) was excellent, she ensured that everyone was on track and that it wasn’t just getting put into the ‘to do list’. In Fujitsu everyone in the Oracle Practice has an objective to achieve the competency tests in their area, so achieving the 2 pre sales, 2 sales and 1 support was no problem at all. We actually had 22 with the support capability proficiency.  The implementation specialist exams are much harder, more like OCP in the database area. We had help from the Oracle SOA Community; Jürgen Kress who runs this in EMEA is really motivational. At the time we started SOA was a beta exam which means you do not get the results immediately but again we put forward more than we needed. Manjit Chopra, Sukhraj Sahota, Emely Patra, Ian Scorrer and Sunny Sidhu all took the exam and eventually got the results they wanted they had passed. Congratulations. Here is Jurgen expalining why specialization is important. After the tests came the submissions where you need to include deals and experience, this was my bit, and persuading Oracle we really deserved the specialization. Finally we got the news we had been awarded the specialization, and a few days later that we were first globally. I am very proud. However there is no rest for the wicked and we plodded on to make the 5 specializations needed for Platinum and now we are working on the new Diamond status and I think SOA will be one of our 5 ‘super specializations’. This is a global Fujitsu initiative and I work closely with my colleague in Germany Jessika Weiss. It was nice to be able to have a press release about this and a comment from Judson Althoff  head of Oracle Alliances. For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA,SOA Community,OPN,Oracle,Fujitsu,Debra Lilley,Jürgen Kress,Specialization,SOA Specialization

    Read the article

  • Increasing touch surface (#wp7dev)

    - by Laurent Bugnion
    When you design for Windows Phone 7 (or for any touch device, for that matter, and most especially small screens), you need to be very careful to give enough surface to your users’ fingers. It is easy to miss a touch on such small screens, and that can be horrifyingly frustrating. This is especially true when people are on the move, and trying to hit the control while walking and holding their device in one hand, or when the device is mounted in a car and vibrating with the engine. In my experience, a touch surface should be ideally minimum 60x60 pixels to be easy to activate on the Windows Phone 7 screen (which is, as we know, 800 pixels x 480 pixels). Ideally, I try to make my touch surfaces 80x80 pixels minimum. This causes a few design challenges of course. Using transparent backgrounds However, one thing is helping us tremendously: some surfaces can be made transparent, and yet react to touch. The secret is the following: If you have a panel that has a Null background (i.e. the Background is not set at all), then the empty surface does not react to touch. If however the Background is set to the Transparent color (or any color where the Alpha channel is set to 0), then it will react to touch. Setting a transparent background is easy. For example: <Grid Background="#00000000"> </Grid> or <Grid Background="Transparent"> </Grid> In C#: var grid = new Grid { Background = new SolidColorBrush( Colors.Transparent) }; Using negative margins Having a transparent background reactive to touch is a good start, but in addition, you must make sure that the surface is big enough for my clumsy fingers. One way to achieve that is to increase the transparent, touch-reactive surface, and reposition the element using negative margins. For example, consider the following UI. I changed the transparent background of the HyperlinkButton to Red, in order to visualize the touch surface. In this figure, the Settings HyperlinkButton is 105 pixels x 31 pixels. This is wide enough, but really small in height and easy to miss. To improve this, we can use negative margins, for instance: <HyperlinkButton Content="Settings" HorizontalAlignment="Right" VerticalAlignment="Bottom" Height="60" Margin="0,0,0,-15" /> Notice the usage of negative bottom margin to bring the HyperlinkButton back at the bottom of the main Grid’s first row, where it belongs. And the result is: Notice how the touch surface is much bigger than before. This makes the HyperlinkButton easier to reach, and improves the user experience. With the background set back to normal, the UI looks exactly the same, as it should: In summary: Remember to maximize the touch surface for your controls. Plan your design in consequence by reserving enough room around each control to allow their hit surface to be expanded as shown in this article. Do not cram too many controls in one page. If REALLY needed, use an additional page (or even better: use a Pivot control with multiple pivot items) for the controls that don’t fit on the first one. This should ensure a smoother user experience and improved touch behavior. Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Why Your ERP System Isn't Ready for the Next Evolution of the Enterprise

    - by [email protected]
    By ken.pulverman on March 24, 2010 8:51 AM ERP has been the backbone of enterprise software. The data held in your ERP system is core of most companies. Efficiencies gained through the accounting and resource allocation through ERP software have literally saved companies trillions of dollars. Not only does everything seem to be fine with your ERP system, you haven't had to touch it in years. Why aren't you ready for what comes next? Well judging by the growth rates in the space (Oracle posted only a 3% growth rate, while SAP showed a 12% decline) there hasn't been much modernization going on, just a little replacement activity. If you are like most companies, your ERP system is connected to a proprietary middleware solution that only effectively talks with a handful of other systems you might have acquired from the same vendor. Connecting your legacy system through proprietary middleware is expensive and brittle and if you are like most companies, you were only willing to pay an SI so much before you said "enough." So your ERP is working. It's humming along. You might not be able to get Order to Promise information when you take orders in your call center, but there are work arounds that work just fine. So what's the problem? The problem is that you built your business around your ERP core, and now there is such pressure to innovate your business processes to keep up that you need a whole new slew of modern apps and you need ERP data to be accessible from everywhere. Every time you change a sales territory or a comp plan or change a benefits provider your ERP system, literally the economic brain of your business, needs to know what's going on. And this giant need to access and provide information to your ERP is only growing. What makes matters even more challenging is that apps today come in every flavor under the Sun™. SaaS, cloud, managed, hybrid, outsourced, composite....and they all have different integration protocols. The only easy way to get ahead of all this is to modernize the way you connect and run your applications. Unlike the middleware solutions of yesteryear, modern middleware is effectively the operating system of the enterprise. In the same way that you rely on Apple, Microsoft, and Google to find a video driver for your 23" monitor or to ensure that Word or Keynote runs, modern middleware takes care of intra-application connectivity and process execution. It effectively allows you to take ERP out of the middle while ensuring connectivity to your vital data for anything you want to do. The diagram below reflects that change. In this model, the hegemony of ERP is over. It too has to become a stealthy modern app to help you quickly adapt to business changes while managing vital information. And through modern middleware it will connect to everything. So yes ERP as we've know it is dead, but long live ERP as a connected application member of the modern enterprise. I want to Thank Andrew Zoldan, Group Vice President Oracle Manufacturing Industries Business Unit for introducing me to how some of his biggest customers have benefited by modernizing their applications infrastructure and making ERP a connected application. by John Burke, Group Vice President, Applications Business Unit

    Read the article

  • Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

    - by Tanu Sood
    About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

    Read the article

  • Best Platform/Engine for turn based Client/Server Android game

    - by Paradine
    I'm currently designing a turn based game for tablets. Initially for Android with porting to iOS later considered in design. I'm having trouble narrowing down the available technologies to even know where to spend my research time. I am hoping that if I explain what I am trying to achieve someone may be able to suggest a platform and/or engine. I've looked into some of the open source Engines ( http://www.cuteandroid.com/ten-open-source-android-2d-or-3d-game-engine-for-android-developers ) and some appear to handle much of what I might require - although with a higher focus on graphics than i need. Mages looks interesting although development appears to have ceased. If I could somehow leverage GoogleApps that would be excellent. Here is what I am trying to achieve: PvP turn based strategy game over internet - minimal animation and bandwidth required Players match up online using MetaGame system MatchID created on Resolution Server and Game starts Clients have 30 second countdown to select MoveString Clients sends small secure timestamped and MatchIDed MoveString to Resolution server Resolution server looks up Move String for each player, Resolves and Updates Players status in MatchID on Server Resolution server updates Client Views Repeat until victory conditions met - MatchID Closed, Rewards earned in MetaGame There will also need to be a full social and account system and metagame backend - but this could be running on separate system(s) Tablet in Offline mode would be catalog browsing and perhaps single player AI - bum I'm focusing on the Resolution Server at this point I'm not even certain if I would be looking at an Android App or a WebApp at this stage! I want a custom GUI so I guess an app - but maybe as I have little animation a WebApp might also work. Probably some combination of both. There will be very small overhead in data between client server - essentially a small text string every 30 seconds sent to the Resolution server which looks up the Effect and applies it to the Opponents string and determines some results to apply to the match. The client view is updated minimally with the results (only 5 in game Integers tracked) - perhaps triggering small animations/popups on the client to show the end result. e.g Explosion. If you have suggestions for a good technology or platform to best achieving the Resolution Server I'd love to hear. Also if you have experience with open source Engines - and could narrow down which (if any ) might be most suitable that would be a big help. Thanks in advance

    Read the article

  • Orchestrating the Virtual Enterprise, Part II

    - by Kathryn Perry
    A guest post by Jon Chorley, Oracle's CSO & Vice President, SCM Product Strategy Almost everyone has ordered from Amazon.com at one time or another. Our orders are as likely to be fulfilled by third parties as they are by Amazon itself. To deliver the order promptly and efficiently, Amazon has to send it to the right fulfillment location and know the availability in that location. It needs to be able to track status of the fulfillment and deal with exceptions. As a virtual enterprise, Amazon's operations, using thousands of trading partners, requires a very different approach to fulfillment than the traditional 'take an order and ship it from your own warehouse' model. Amazon had no choice but to develop a complex, expensive and custom solution to tackle this problem as there used to be no product solution available. Now, other companies who want to follow similar models have a better off-the-shelf choice -- Oracle Distributed Order Orchestration (DOO).  Consider how another of our customers is using our distributed orchestration solution. This major airplane manufacturer has a highly complex business and interacts regularly with the U.S. Government and major airlines. It sits in the middle of an intricate supply chain and needed to improve visibility across its many different entities. Oracle Fusion DOO gives the company an orchestration mechanism so it could improve quality, speed, flexibility, and consistency without requiring an organ transplant of these highly complex legacy systems. Many retailers face the challenge of dealing with brick and mortar, Web, and reseller channels. They all need to be knitted together into a virtual enterprise experience that is consistent for their customers. When a large U.K. grocer with a strong brick and mortar retail operation added an online business, they turned to Oracle Fusion DOO to bring these entities together. Disturbing the Peace with Acquisitions Quite often a company's ERP system is disrupted when it acquires a new company. An acquisition can inject a new set of processes and systems -- or even introduce an entirely new business like Sun's hardware did at Oracle. This challenge has been a driver for some of our DOO customers. A large power management company is using Oracle Fusion DOO to provide the flexibility to rapidly integrate additional products and services into its central fulfillment operation. The Flip Side of Fulfillment Meanwhile, we haven't ignored similar challenges on the supply side of the equation. Specifically, how to manage complex supply in a flexible way when there are multiple trading parties involved? How to manage the supply to suppliers? How to manage critical components that need to merge in a tier two or tier three supply chain? By investing in supply orchestration solutions for the virtual enterprise, we plan to give users better visibility into their network of suppliers to help them drive down costs. We also think this technology and full orchestration process can be applied to the financial side of organizations. An example is transactions that flow through complex internal structures to minimize tax exposure. We can help companies manage those transactions effectively by thinking about the internal organization as a virtual enterprise and bringing the same solution set to this internal challenge.  The Clear Front Runner No other company is investing in solving the virtual enterprise supply chain issues like Oracle is. Oracle is in a unique position to become the gold standard in this market space. We have the infrastructure of Oracle technology. We already have an Oracle Fusion DOO application which embraces the best of what's required in this area. And we're absolutely committed to extending our Fusion solution to other use cases and delivering even more business value. Jon ChorleyChief Sustainability Officer & Vice President, SCM Product StrategyOracle Corporation

    Read the article

  • How to convince my boss that quality is a good thing to have in code?

    - by Kristof Claes
    My boss came to me today to ask me if we could implement a certain feature in 1.5 days. I had a look at it and told him that 2 to 3 days would be more realistic. He then asked me: "And what if we do it quick and dirty?" I asked him to explain what he meant with "quick and dirty". It turns out, he wants us to write code as quickly as humanly possible by (for example) copying bits and pieces from other projects, putting all code in the code-behind of the WebForms pages, stop caring about DRY and SOLID and assuming that the code and functionalities will never ever have to be modified or changed. What's even worse, he doesn't want us do it for just this one feature, but for all the code we write. We can make more profit when we do things quick and dirty. Clients don't want to pay for you taking into account that something might change in the future. The profits for us are in delivering code as quick as possible. As long as the application does what it needs to do, the quality of the code doesn't matter. They never see the code. I have tried to convince him that this is a bad way to think as the manager of a software company, but he just wouldn't listen to my arguments: Developer motivation: I explained that it is hard to keep developers motivated when they are constantly under pressure of unrealistic deadlines and budget to write sloppy code very quickly. Readability: When a project gets passed on to another developer, cleaner and better structured code will be easier to read and understand. Maintainability: It is easier, safer and less time consuming to adapt, extend or change well written code. Testability: It is usually easier to test and find bugs in clean code. My co-workers are as baffled as I am by my boss' standpoint, but we can't seem to get to him. He keeps on saying that by making things more quickly, we can sell more projects, ask a lower price for them while still making a bigger profit. And in the end these projects pay the developer's salaries. What more can I say to make him see he is wrong? I want to buy him copies of Peopleware and The Mythical Man-Month, but I have a feeling they won't change his mind either. A lot of you will probably say something like "Run! Get out of there now!" or "I'd quit!", but that's not really an option since .NET web development jobs are rather rare in the region where I live...

    Read the article

  • Fast Data: Go Big. Go Fast.

    - by J Swaroop
    Cross-posting Dain Hansen's excellent recap of the Big Data/Fast Data announcement during OOW: For those of you who may have missed it, today’s second full day of Oracle OpenWorld 2012 started with a rumpus. Joe Tucci, from EMC outlined the human face of big data with real examples of how big data is transforming our world. And no not the usual tried-and-true weblog examples, but real stories about taxi cab drivers in Singapore using big data to better optimize their routes as well as folks just trying to get a better hair cut. Next we heard from Thomas Kurian who talked at length about the important platform characteristics of Oracle’s Cloud and more specifically Oracle’s expanded Cloud Services portfolio. Especially interesting to our integration customers are the messaging support for Oracle’s Cloud applications. What this means is that now Oracle’s Cloud applications have a lightweight integration fabric that on-premise applications can communicate to it via REST-APIs using Oracle SOA Suite. It’s an important element to our strategy at Oracle that supports this idea that whether your requirements are for private or public, Oracle has a solution in the Cloud for all of your applications and we give you more deployment choice than any vendor. If this wasn’t enough to get the juices flowing, later that morning we heard from Hasan Rizvi who outlined in his Fusion Middleware session the four most important enterprise imperatives: Social, Mobile, Cloud, and a brand new one: Fast Data. Today, Rizvi made an important step in the definition of this term to explain that he believes it’s a convergence of four essential technology elements: Event Processing for event filtering, business rules – with Oracle Event Processing Data Transformation and Loading - with Oracle Data Integrator Real-time replication and integration – with Oracle GoldenGate Analytics and data discovery – with Oracle Business Intelligence Each of these four elements can be considered (and architect-ed) together on a single integrated platform that can help customers integrate any type of data (structured, semi-structured) leveraging new styles of big data technologies (MapReduce, HDFS, Hive, NoSQL) to process more volume and variety of data at a faster velocity with greater results.  Fast data processing (and especially real-time) has always been our credo at Oracle with each one of these products in Fusion Middleware. For example, Oracle GoldenGate continues to be made even faster with the recent 11g R2 Release of Oracle GoldenGate which gives us some even greater optimization to Oracle Database with Integrated Capture, as well as some new heterogeneity capabilities. With Oracle Data Integrator with Big Data Connectors, we’re seeing much improved performance by running MapReduce transformations natively on Hadoop systems. And with Oracle Event Processing we’re seeing some remarkable performance with customers like NTT Docomo. Check out their upcoming session at Oracle OpenWorld on Wednesday to hear more how this customer is using Event processing and Big Data together. If you missed any of these sessions and keynotes, not to worry. There's on-demand versions available on the Oracle OpenWorld website. You can also checkout our upcoming webcast where we will outline some of these new breakthroughs in Data Integration technologies for Big Data, Cloud, and Real-time in more details.

    Read the article

  • Functional/nonfunctional requirements VS design ideas

    - by Nicholas Chow
    Problem domain Functional requirements defines what a system does. Non-Functional requirements defines quality attributes of what the system does as a whole.(performance, security, reliability, volume, useability, etc.) Constraints limits the design space, they restrict designers to certain types of solutions. Solution domain Design ideas , defines how the system does it. For example a stakeholder need might be we want to increase our sales, therefore we must improve the usability of our webshop so more customers will purchase, a requirement can be written for this. (problem domain) Design takes this further into the solution domain by saying "therefore we want to offer credit card payments in addition to the current prepayment option". My problem is that the transition phase from requirement to design seems really vague, therefore when writing requirements I am often confused whether or not I incorporated design ideas in my requirements, that would make my requirement wrong. Another problem is that I often write functional requirements as what a system does, and then I also specify in what timeframe it must be done. But is this correct? Is it then a still a functional requirement or a non functional one? Is it better to seperate it into two distinct requirements? Here are a few requirements I wrote: FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. FR2 Organizer submits a Project FR2 describes the submission of a Project by an Organizer on CrowdFundum - FR2 The system shall display a submit Project form to the Organizer accounts on the website.< - FR2.3 The system shall check for completeness the Name of the Project, 1-3 Photo’s, Keywords of the Project, Punch line, Minimum and maximum amount of people, Funding threshold, One or more reward tiers, Schedule of when what will be organized, Budget plan, 300-800 Words of additional information about the Project, Contact details within 1 secondin after an Organizer submits the submit Project form. - FR2.8 The system shall add to the homepage in the new Projects category the Project link within 30 seconds after the system made a Project webpage - FR2.9 The system shall include in the Project link for the homepage : Name of the Project, 1 Photo, Punch line within 30 seconds after the system made a Project webpage. Questions: FR 1.1 : Have I incorporated a design idea here, would " the system shall have a registration form" be a better functional requirement? F1.2 ,2.3 : Is this not singular? Would the conditions be better written for each its own separate requirement FR 1.4: Is this a design idea? Is this a correct functional requirement or have I incorporated non functional(performance) in it? Would it be better if I written it like this: FR1 The system shall display an error message when check is unsuccessful. NFR: The system will respond to unsuccesful registration form checks within 1 seconds. Same question with FR 2.8 and 2.9. FR2.3: The system shall check for "completeness", is completeness here used ambigiously? Should I rephrase it? FR1.2: I added that the system shall require a "Captcha code" is this a functional requirement or does it belong to the "security aspect" of a non functional requirement. I am eagerly waiting for your response. Thanks!

    Read the article

  • What's New in Oracle's EPM System?

    - by jmorourke
    Oracle’s EPM System R11.1.2.2  is now generally available to customers and partners on the download center.  Although the release number doesn’t sound significant, this is a major release of Oracle’s Hyperion EPM Suite with new modules as well as significant enhancements across the suite.  This release was announced back on April 4th as part of Oracle’s Business Analytics Strategy launch, so analytics is a key aspect of the release.  But the three biggest pieces of news in this release are Oracle Hyperion Planning support for the Exalytics In-Memory Machine, the new Project Financial Planning Application and the new Account Reconciliations Manager module. The Oracle Exalytics In-Memory Machine was announced back in October 2011, at Oracle OpenWorld.  It’s the latest installment from Oracle in a line of engineered systems that combine Oracle Sun hardware, with Oracle database and application technologies – in solutions that are designed to provide high scalability and performance for specific tasks.  Exalytics is the first engineered system specifically designed for high performance analytics.  Running in-memory versions of Oracle Essbase, as well as the Oracle TimesTen database and Oracle BI tools, Exalytics provides speed of thought response times for complex analytic processes with advanced visualizations.  Early adopter customers have achieved 5X to 100X faster interactivity and 6X to 10X faster planning cycles.  Hyperion Planning running with Oracle Exalytics will support enterprise-wide planning, budgeting and forecasting with more detailed data, with hundreds to thousands of users across an organization getting speed of thought performance. The new Hyperion Project Financial Planning application delivered with EPM 11.1.2.2 is also great news for Oracle customers.  This application follows on the heels of other special-purpose planning applications that Oracle has delivered for Workforce and Capital Asset planning.  It allows Project Managers to identify project-related expenses and revenues, plan and propose new projects, and track results over time. Finance Managers can evaluate and compare different projects, manage the funding process, monitor and report the actual financial results and impacts of projects and project portfolios. This new application is applicable to capital projects, contract projects and indirect projects like IT and HR projects across all industries.  This application is a great complement to existing Project Management applications, and helps bridge the gap between these applications, and the financial planning and budgeting process. Account reconciliations has to be one of the biggest bottlenecks and risks in the financial close and reporting process, and many organizations rely on spreadsheets and manual processes to perform this critical process.  To help address this problem, Oracle developed an Account Reconciliation Manager module that is being delivered as part of Oracle Hyperion Financial Close Management.   This module helps automate and streamline account reconciliations and eliminates the chances for errors, omissions and fraud.  But unlike standalone account reconciliation packages, it’s integrated with the rest of the Oracle Hyperion Financial Close suite, and can integrate balances from any source system.  This can help alleviate a major bottleneck in the financial close process, increase accuracy and reduce risk, and can complement existing investments in Hyperion Financial Management, as well as Oracle and non-Oracle transaction processing systems. Other enhancements in this release include an enhanced Web 2.0 interface for Hyperion Planning and Hyperion Financial Management (HFM), configurable dimensionality in HFM, new Predictive Planning feature in Hyperion Planning, new Detailed Profitability feature in Hyperion Profitability and Cost Management, new Smart View interface for Hyperion Strategic Finance, and integration of the Hyperion applications with JD Edwards Financials. For more information about Oracle EPM System R11.1.2.2 check out the links below: Press Release:  http://www.oracle.com/us/corporate/press/1575775 Product Information on O.com:  http://www.oracle.com/us/solutions/business-analytics/overview/index.html Product Information on OTN:  http://www.oracle.com/technetwork/middleware/epm/downloads/index.html Webcast Replay:  http://www.oracle.com/us/go/index.html?Src=7317510&Act=65&pcode=WWMK11054701MPP046 Please contact me if you have any questions or need additional information – [email protected]

    Read the article

  • ORACLE is WEB 2.0

    - by anca.rosu
    You never know what to expect in life, where it can take you and what kind of fulfillment it can offer you. It’s just like an amazing lottery with millions of winning tickets. My name is Paula, I am an Online Marketing Specialist at Oracle University and this is my story. Having graduated from a technical profile college, it seemed almost normal to follow the same career path. But I said no. I wanted to try something else, so I took an Advertising Masters Program and I really became in love with this entire industry. Advertising and the new impact of the Internet through social networking is my current fascination. I knew I had to work to incorporate both my skills intro one dream job. I want to believe that I have come to work at Oracle as part of a great plan that life has for me. It’s not the most glamorous job in advertising or in the fashion industry, but it’s everything you need to start investing in your development and to build relationships. A normal day at work begins at 9.30 at our Oracle Office in Bucharest. After a short chit-chat, coffee and some conference calls, marketing gets to work! Some of the members of my team are working besides me but others are based all over Europe. This is extremely useful when coordinating the EMEA Marketing for Oracle University, because this way it’s easier to keep an eye on these various locations. Even though it’s a team play, you need to speak up and make your mark. I am the kind of person that never stands-by and waits to be given directions, I am curious and intuitive. This makes things easier. In Oracle you really need to find your own way and to discover how to organize your time and how to get involved with people. People to people, this is the focus. But everything is up to you and it strongly depends on the type of personality that you have. I try to get involved in various activities, participate in Oracle Days Events, interact and meet all kinds of people. For those who are newly graduates or interns, Oracle has lots of trainings and webcasts you can attend to help you develop your career shape and to understand better the way the business works. You can also be awarded for ideas and setting the trends so that makes it worth it. What I like most about my job is the fact that I can come with ideas and bring them to life. For example Oracle University has a special seminar program called “Celebrity Seminars” where top industry speakers teach 1-day or 2-day condensed seminars. We thought of creating something exclusive and a video was the best idea. So my colleague and I became reporters for a day and interviewed this well-known speaker regarding his seminar. I think this is a good way to market this business. Live footage is a very good marketing tool so we are planning to use the video to target our online audiences via Facebook, Twitter or LinkedIn. This can even go in the newsletters that marketing sends regarding the Celebrity Seminars. This is what I meant when I said Oracle is a free spirited organization and you can surely find your place here among us. The best way to describe my job is WEB 2.0. The modern online approach comes to life while we are trying to sell our business. We need to be out there and we are responsible of spreading the buzz regarding our training offerings and our official courseware materials. There are so many new ways to interact with the target audience nowadays and I am so eager to discover the best online techniques! If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com Technorati Tags: WEB 2.0,Online Marketing,Oracle University,Bucharest,events,graduates,interns,training,webcast,seminar,newsletters,business,Facebook,Twitter,LinkedIn

    Read the article

  • How can I convince cowboy programmers to use source control?

    - by P.Brian.Mackey
    UPDATE I work on a small team of devs, 4 guys. They have all used source control. Most of them can't stand source control and instead choose not to use it. I strongly believe source control is a necessary part of professional development. Several issues make it very difficult to convince them to use source control: The team is not used to using TFS. I've had 2 training sessions, but was only allotted 1 hour which is insufficient. Team members directly modify code on the server. This keeps code out of sync. Requiring comparison just to be sure you are working with the latest code. And complex merge problems arise Time estimates offered by developers exclude time required to fix any of these problems. So, if I say nono it will take 10x longer...I have to constantly explain these issues and risk myself because now management may perceive me as "slow". The physical files on the server differ in unknown ways over ~100 files. Merging requires knowledge of the project at hand and, therefore, developer cooperation which I am not able to obtain. Other projects are falling out of sync. Developers continue to have a distrust of source control and therefore compound the issue by not using source control. Developers argue that using source control is wasteful because merging is error prone and difficult. This is a difficult point to argue, because when source control is being so badly mis-used and source control continually bypassed, it is error prone indeed. Therefore, the evidence "speaks for itself" in their view. Developers argue that directly modifying server code, bypassing TFS saves time. This is also difficult to argue. Because the merge required to synchronize the code to start with is time consuming. Multiply this by the 10+ projects we manage. Permanent files are often stored in the same directory as the web project. So publishing (full publish) erases these files that are not in source control. This also drives distrust for source control. Because "publishing breaks the project". Fixing this (moving stored files out of the solution subfolders) takes a great deal of time and debugging as these locations are not set in web.config and often exist across multiple code points. So, the culture persists itself. Bad practice begets more bad practice. Bad solutions drive new hacks to "fix" much deeper, much more time consuming problems. Servers, hard drive space are extremely difficult to come by. Yet, user expectations are rising. What can be done in this situation?

    Read the article

  • Big Data – How to become a Data Scientist and Learn Data Science? – Day 19 of 21

    - by Pinal Dave
    In yesterday’s blog post we learned the importance of the analytics in Big Data Story. In this article we will understand how to become a Data Scientist for Big Data Story. Data Scientist is a new buzz word, everyone seems to be wanting to become Data Scientist. Let us go over a few key topics related to Data Scientist in this blog post. First of all we will understand what is a Data Scientist. In the new world of Big Data, I see pretty much everyone wants to become Data Scientist and there are lots of people I have already met who claims that they are Data Scientist. When I ask what is their role, I have got a wide variety of answers. What is Data Scientist? Data scientists are the experts who understand various aspects of the business and know how to strategies data to achieve the business goals. They should have a solid foundation of various data algorithms, modeling and statistics methodology. What do Data Scientists do? Data scientists understand the data very well. They just go beyond the regular data algorithms and builds interesting trends from available data. They innovate and resurrect the entire new meaning from the existing data. They are artists in disguise of computer analyst. They look at the data traditionally as well as explore various new ways to look at the data. Data Scientists do not wait to build their solutions from existing data. They think creatively, they think before the data has entered into the system. Data Scientists are visionary experts who understands the business needs and plan ahead of the time, this tremendously help to build solutions at rapid speed. Besides being data expert, the major quality of Data Scientists is “curiosity”. They always wonder about what more they can get from their existing data and how to get maximum out of future incoming data. Data Scientists do wonders with the data, which goes beyond the job descriptions of Data Analysist or Business Analysist. Skills Required for Data Scientists Here are few of the skills a Data Scientist must have. Expert level skills with statistical tools like SAS, Excel, R etc. Understanding Mathematical Models Hands-on with Visualization Tools like Tableau, PowerPivots, D3. j’s etc. Analytical skills to understand business needs Communication skills On the technology front any Data Scientists should know underlying technologies like (Hadoop, Cloudera) as well as their entire ecosystem (programming language, analysis and visualization tools etc.) . Remember that for becoming a successful Data Scientist one require have par excellent skills, just having a degree in a relevant education field will not suffice. Final Note Data Scientists is indeed very exciting job profile. As per research there are not enough Data Scientists in the world to handle the current data explosion. In near future Data is going to expand exponentially, and the need of the Data Scientists will increase along with it. It is indeed the job one should focus if you like data and science of statistics. Courtesy: emc Tomorrow In tomorrow’s blog post we will discuss about various Big Data Learning resources. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • SQL SERVER – Select the Most Optimal Backup Methods for Server

    - by pinaldave
    Backup and Restore are very interesting concepts and one should be very much with the concept if you are dealing with production database. One never knows when a natural disaster or user error will surface and the first thing everybody wants is to get back on point in time when things were all fine. Well, in this article I have attempted to answer a few of the common questions related to Backup methodology. How to Select a SQL Server Backup Type In order to select a proper SQL Server backup type, a SQL Server administrator needs to understand the difference between the major backup types clearly. Since a picture is worth a thousand words, let me offer it to you below. Select a Recovery Model First The very first question that you should ask yourself is: Can I afford to lose at least a little (15 min, 1 hour, 1 day) worth of data? Resist the temptation to save it all as it comes with the overhead – majority of businesses outside finances can actually afford to lose a bit of data. If your answer is YES, I can afford to lose some data – select a SIMPLE (default) recovery model in the properties of your database, otherwise you need to select a FULL recovery model. The additional advantage of the Full recovery model is that it allows you to restore the data to a specific point in time vs to only last backup time in the Simple recovery model, but it exceeds the scope of this article Backups in SIMPLE Recovery Model In SIMPLE recovery model you can select to do just Full backups or Full + Differential. Full Backup This is the simplest type of backup that contains all information needed to restore the database and should be your first choice. It is often sufficient for small databases, but note that it makes a big impact on the performance of your database Full + Differential Backup After Full, Differential backup picks up all of the changes since the last Full backup. This means if you made Full, Diff, Diff backup – the last Diff backup contains all of the changes and you don’t need the previous Differential backup. Differential backup is obviously smaller and carries less performance overhead Backups in FULL Recovery Model In FULL recovery model you can select Full + Transaction Log or Full + Differential + Transaction Log backup. You have to create Transaction Log backup, because at that time the log is being truncated. Otherwise your Transaction Log will grow uncontrollably. Full + Transaction Log Backup You would always need to perform a Full backup first. Then a series of Transaction log backup. Note that (in contrast to Differential) you need ALL transactions to log since the last Full of Diff backup to properly restore. Transaction log backups have the smallest performance overhead and can be performed often. Full + Differential + Transaction Log Backup If you want to ease the performance overhead on your server, you can replace some of the Full backup in the previous scenario with Differential. You restore scenario would start from Full, then the Last Differential, then all of the remaining transactions log backups Typical backup Scenarios You may say “Well, it is all nice – give me the examples now”. As you may already know, my favorite SQL backup software is SQLBackupAndFTP. If you go to Advanced Backup Schedule form in this program and click “Load a typical backup plan…” link, it will give you these scenarios that I think are quite common – see the image below. The Simplest Way to Schedule SQL Backups I hate to repeat myself, but backup scheduling in SQL agent leaves a lot to be desired. I do not know the simple way to schedule your SQL server backups than in SQLBackupAndFTP – see the image below. The whole backup scheduling with compression, encryption and upload to a Network Folder / HDD / NAS Drive / FTP / Dropbox / Google Drive / Amazon S3 takes just a few minutes – see my previous post for the review. Final Words This post offered an explanation for major backup types only. For more complicated scenarios or to research other options as usually go to MSDN. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • SQLAuthority News – Random Thoughts and Random Ideas

    - by pinaldave
    There are days when I keep on wondering about SQL, and even my life overall. Today is Saturday so I decided to write about SQL Server. Just like any other mornings, I woke up at 5 and opened my blog editor. I usually do not open Twitter or Facebook when I am planning to focus on my work, as they are little distractions for me. But today I opened my Twitter account and came across a very interesting quote from a friend: ‘Can I expect you to be different today?’ Well, I think it was very powerful quote for me to read first thing on a new day. This quote froze me for a while and made me think, “Do I really want to write about an SQL Server tip, or something different?”  After a little thinking, I’ve realized that for today I would go on and write something different. I am going to write about a few of the ideas and thoughts I had yesterday. After writing all these, I realized that if I am thinking so much in a day, and if I write a blog post of my random musing of the week or month, it can be so long (and boring). Here are some of my random thoughts I’d like to share with you: When the airplane lands, why does everybody get up and try to rush out when their luggage would be coming probably 20-30 minutes later? I really do not like this question when it was asked to me: “SQL Server is not using optimal index which I just created – how can I force it?” I am not going elaborate on this statement but you are allowed to in the comment section. Why do some people wish Good Morning even when they meet us after 4 PM? Can I optimize a query so much that it gives me a result before I execute it? Is it corruption when someone does their personal household work at office? The lane where I drive is always the slowest lane. Why waste time on correcting others when there are a lot of pending improvements for ourselves? If I have to get Tattoo, which SQL Server Execution Plan symbol should I get? Why do I reach office so early that the coffee machine is yet running its daily cleaning job? Why does every laptop have a ‘Page Up’ key at different locations on the keyboard? While I like color movies, I really appreciate black and white photographs. I do not appreciate statements like, “If I receive your books in PDF, I will spread it to many people to give you much greater exposure. So would you please send them to me ASAP?” Do not tell me, “Why does the database grow back after shrinking it every day?” I suggest you use “Search this blog” for the explanation. Petrol prices are currently at INR 74. I hope the rate remains there. Let me ask you the same question which started my day today:  “Can I expect you to be different today?” Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SEO non-English domain name advice

    - by Dominykas Mostauskis
    I'm starting a website, that is meant for a non-English region, using an alphabet that is a bit different than that of English. Current plan is as follows. The website name, and the domain name, will be in the local language (not English); however, domain name will be spelled in the English alphabet, while the website's title will be the same word(s), but spelled properly with accents. E.g.: 'www.litterat.fr' and 'Littérat'. Does the difference between domain name and website name character use influence the site's SEO? Is it better, SEO-wise, to choose a name that can be spelled the same way in the English alphabet? From my experience, when searching online, invariably, the English alphabet is used, no matter the language, so people will still be searching 'litterat' (without accents and such). Edit: To sum up: Things have been said about IDN (Internationalized domain name). To make it simple, they are second-level domain names that contain language specific characters (LSP)(e.g. www.café.fr). Here you can check what top-level domains support what LSPs. Check initall's answer for more info on using LSPs in paths and queries. To answer my question about how and if search engines relate keywords spelled with and without language specific characters: Google can potentially tell that series and séries is the same keyword. However, (most relevant for words that are spelled differently across languages and have different meanings, like séries), for Google to make the connection (or lack thereof) between e and é, it has to deduce two things: Language that you are searching in. Language of your query. You can specify it manually through Advanced search or it guesses it, sometimes. I presume it can guess it wrong too. The more keywords specific to this language you use the higher Google's chance to guess the language. Language of the crawled document, against which the ASCII version of the word will be compared (in this example – series). Again, check initall's answer for how to help Google in understanding what language your document is in. Once it has that it can tell whether or not these two spellings should be treated as the same keyword. Google has to understand that even though you're not using french (in this example) specific characters, you're searching in French. The reason why I used the french word séries in this example, is that it demonstrates this very well. You have it in French and you have it in English without the accent. So if your search query is ambiguous like our series, unless Google has something more to go on, it will presume that there's no correlation between your search and séries in French documents. If you augment your query to series romantiques (try it), Google will understand that you're searching in French and among your results you'll see séries as well. But this does not always work, you should test it out with your keywords first. For example, if you search series francaises, it will associate francaises with françaises, but it will not associate series with séries. It depends on the words. Note: worth stressing that this problem is very relevant to words that, written in plain ASCII, might have some other meanings in other languages, it is less relevant to words that can be, by a distinct margin, just some one language. Tip: I've noticed that sometimes even if my non-accented search query doesn't get associated with the properly spelled word in a document (especially if it's the title or an important keyword in the doc), it still comes up. I followed the link, did a Ctrl-F search for my non-accented search query and found nothing, then checked the meta-tags in the source and you had the page's title in both accented and non-accented forms. So if you have meta-tags that can be spelled with language specific characters and without, put in both. Footnote: I hope this helps. If you have anything to add or correct, go ahead.

    Read the article

  • Welcome 2011

    - by PSteele
    About this time last year, I wrote a blog post about how January of 2010 was almost over and I hadn’t done a single blog post.  Ugh…  History repeats itself. 2010 in Review If I look back at 2010, it was a great year in terms of technology and development: Visited Redmond to attend the MVP Summit in February.  Had a great time with the MS product teams and got to connect with some really smart people. Continued my work on Visual Studio Magazine’s “C# Corner” column.  About mid-year, the column changed from an every-other-month print column to an every-other-month print column along with bi-monthly web-only articles.  Needless to say, this kept me even busier and away from my blog. Participated in another GiveCamp!  Thanks to the wonderful leadership of Michael Eaton and all of his minions, GiveCamp 2010 was another great success.  Planning for GiveCamp 2011 will be starting soon… I switched to DVCS full time.  After years of being a loyal SVN user, I got bit by the DVCS bug.  I played around with both Mercurial and Git and finally settled on Mercurial.  It’s seamless integration with Windows Explorer along with it’s wealth of plugins made me fall in love.  I can’t imagine going back and using a centralized version control system. Continued to work with the awesome group of talent at SRT Solutions.  Very proud that SRT won it’s third consecutive FastTrack award! Jumped off the BlackBerry train and enjoying the smooth ride of Android.  It was time to replace the old BlackBerry Storm so I did some research and settled on the Motorola DroidX.  I couldn’t be happier.  Android is a slick OS and the DroidX is a sweet piece of hardware.  Been dabbling in some Android development with both Eclipse and IntelliJ IDEA (I like IntelliJ IDEA a lot better!).   2011 Plans On January 1st I was pleasantly surprised to get an email from the Microsoft MVP program letting me know that I had received the MVP award again for my community work in 2010.  I’m honored and humbled to be recognized by Microsoft as well as my peers! I’ll continue to do some Android development.  I’m currently working on a simple app to get me feet wet.  It may even makes it’s way into the Android Market. I’ve got a project that could really benefit from WPF so I’ll be diving into WPF this year.  I’ve played around with WPF a bit in the past – simple demos and learning exercises – but this will give me a chance to build an entire application in WPF.  I’m looking forward to the increased freedom that a WPF UI should give me. I plan on blogging a lot more in 2011! Technorati Tags: Android,MVP,Mercurial,WPF,SRT,GiveCamp

    Read the article

  • Windows 8 Camp&ndash;Ways to Prepare

    - by Lori Lalonde
    When Windows 8 was announced at the BUILD conference back in September, it created quite a buzz among the developer community. By the spring of 2012,  Windows 8 Developer Camps started popping up everywhere imaginable. I received a lot of questions from CTTDNUG members about whether or not we would be hosting one locally. If you recall my post about the Windows Phone/Azure Developer Workshop that CTTDNUG hosted back in March, you’ll remember that the biggest hurdle to overcome when planning this type of event was finding the right venue. It took some time, but I finally found a venue that was available and provided the prerequisites needed to ensure this camp is a success. I am very excited that CTTDNUG will be hosting a Windows 8 Camp this summer in the Kitchener/Waterloo area. In fact, it’s coming up in less than 2 weeks. Clearly other developers are excited as well, because our registration numbers show that the event is already 70% full! On top of that, I was fortunate enough to also book two well-known evangelists to present and teach at this full day developer camp: Andrei Marukovich and Atley Hunter. This was the icing on the cake. With the content provided by Microsoft, and two local experts that live and breathe Windows 8 development, I know that I, along with other developers that attend this event, will have the opportunity to maximize our learning potential and hit the ground running. If you plan on attending a Windows 8 Developer Camp soon, and want to ensure you get the most “bang for your buck” (figuratively speaking, since these camps are free), there are some things you can do to prepare before the big day: 1) Install the prerequisites on your own device before the big day I can’t stress this enough. Otherwise, you will be spending valuable time during the hands-on period downloading and installing what is needed, rather than digging into the development and using that time to ask the experts on-hand about programming challenges, issues, questions you may have with respect to your development. Prerequisites: Windows 8 Release Preview Visual Studio 2012 RC Download the Windows 8 SDK Samples 2) Purchase, download, and read Charles Petzold’s newest book:  Programming Windows 6th Edition This is a great introduction to the type of content you will be learning about during the camp. Doing some light reading beforehand might raise some questions about the concepts discussed in the book, which will give you the opportunity to write them down and bring them with you to the camp. The experts on hand will be able to answer them for you. 3) Make use of the freebies that are available Telerik has recently released a preview of their RadControls for Metro. You can sign up to receive a license code to give you access to install the preview for free and start playing around with it. Syncfusion also offers a free download of their Metro Studio package, which is a collection of metro style icons that you can customize and use in your own applications. Last but not least, once you’ve installed the Windows 8 Release Preview on your own device, go to the Windows 8 Store and download a handful of the free apps that are available. Testing out other Metro apps may give you ideas of what you can do in your own apps and analyze what features you like: application flow, type of animations used, concepts that were leveraged, how live tiles were used, etc. I hope you found these tips to be useful as you embark on a new development journey! Although this post focused on how to prepare for a Windows 8 camp, the same ideas are there whichever developer camp/workshop/event you attend. Learning does not begin and end on the day of the event. Attending a developer camp is just one step of many to master whatever technology you are interested in. It is a continuous process, which is fully maximized when you do your homework beforehand, actively participate during,  and follow up by putting what you learned to practice afterwards. Happy coding!

    Read the article

  • From DBA to Data Analyst

    - by Denise McInerney
    Cross posted from the PASS Blog There is a lot changing in the data professional’s world these days. More data is being produced and stored. More enterprises are trying to use that data to improve their products and services and understand their customers better. More data platforms and tools seem to be crowding the market. For a traditional DBA this can be a confusing and perhaps unsettling time. It’s also a time that offers great opportunity for career growth. I speak from personal experience. We sometimes refer to the “accidental DBA”, the person who finds herself suddenly responsible for managing the database because she has some other technical skills. While it was not accidental, six months ago I was unexpectedly offered a chance to transition out of my DBA role and become a data analyst. I have since come to view this offer as a gift, though at the time I wasn’t quite sure what to do with it. Throughout my DBA career I’ve gotten support from my PASS friends and colleagues and they were the first ones I turned to for counsel about this new situation. Everyone was encouraging and I received two pieces of valuable advice: first, leverage what I already know about data and second, work to understand the business’ needs. Bringing the power of data to bear to solve business problems is really the heart of the job. The challenge is figuring out how to do that. PASS had been the source of much of my technical training as a DBA, so I naturally started there to begin my Business Intelligence education. Once again the Virtual Chapter webinars, local chapter meetings and SQL Saturdays have been invaluable. I work in a large company where we are fortunate to have some very talented data scientists and analysts. These colleagues have been generous with their time and advice. I also took a statistics class through Coursera where I got a refresher in statistics and an introduction to the R programming language. And that’s not the end of the free resources available to someone wanting to acquire new skills. There are many knowledgeable Business Intelligence and Analytics professionals who teach through their blogs. Every day I can learn something new from one of these experts. Sometimes we plan our next career move and sometimes it just happens. Either way a database professional who follows industry developments and acquires new skills will be better prepared when change comes. Take the opportunity to learn something about the changing data landscape and attend a Business Intelligence, Business Analytics or Big Data Virtual Chapter meeting. And if you are moving into this new world of data consider attending the PASS Business Analytics Conference in April where you can meet and learn from those who are already on that road. It’s been said that “the only thing constant is change.” That’s never been more true for the data professional than it is today. But if you are someone who loves data and grasps its potential you are in the right place at the right time.

    Read the article

  • MaxTotalSizeInBytes - Blind spots in Usage file and Web Analytics Reports

    - by Gino Abraham
    Originally posted on: http://geekswithblogs.net/GinoAbraham/archive/2013/10/28/maxtotalsizeinbytes---blind-spots-in-usage-file-and-web-analytics.aspx http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/04/16/usage-file-and-web-analytics-reports-with-blind-spots.aspx In my previous post (Troubleshooting SharePoint 2010 Web Analytics), I referenced a problem that can occur when exceeding the daily partition size for the LoggingDB, which generates the ULS message “[Partition] has exceeded the max bytes”. Below, I wanted to provide some additional info on this particular issue and help identify some options if this occurs. As an aside, this post only applies if you are missing portions of Usage data - think blind spots on intermittent days or user activity regularly sparse for the afternoon/evening. If this fits your scenario - read on. But if Usage logs are outright missing, go check out my Troubleshooting post first.  Background on the problem:The LoggingDB database has a default maximum size of ~6GB. However, SharePoint evenly splits this total size into fixed sized logical partitions – and the number of partitions is defined by the number of days to retain Usage data (by default 14 days). In this case, 14 partitions would be created to account for the 14 days of retention. If the retention were halved to 7 days, the LoggingDBwould be split into 7 corresponding partitions at twice the size. In other words, the partition size is generally defined as [max size for DB] / [number of retention days].Going back to the default scenario, the “max size” for the LoggingDB is 6200000000 bytes (~6GB) and the retention period is 14 days. Using our formula, this would be [~6GB] / [14 days], which equates to 444858368 bytes (~425MB) per partition per day. Again, if the retention were halved to 7 days (which halves the number of partitions), the resulting partition size becomes [~6GB] / [7 days], or ~850MB per partition.From my experience, when the partition size for any given day is exceeded, the usage logging for the remainder of the day is essentially thrown away because SharePoint won’t allow any more to be written to that day’s partition. The only clue that this is occurring (beyond truncated usage data) is an error such as the following that gets reported in the ULS:04/08/2012 09:30:04.78    OWSTIMER.EXE (0x1E24)    0x2C98    SharePoint Foundation    Health    i0m6     High    Table RequestUsage_Partition12 has 444858368 bytes that has exceeded the max bytes 444858368It’s also worth noting that the exact bytes reported (e.g. ‘444858368’ above) may slightly vary among farms. For example, you may instead see 445226812, 439123456, or something else in the ballpark. The exact number itself doesn't matter, but this error message intends to indicates that the reporting usage has exceeded the partition size for the given day.What it means:The error itself is easy to miss, which can lead to substantial gaps in the reporting data (your mileage may vary) if not identified. At this point, I can only advise to periodically check the ULS logs for this message. Down the road, I plan to explore if [Developing a Custom Health Rule] could be leveraged to identify the issue (If you've ever built Custom Health Rules, I'd be interested to hear about your experiences). Overcoming this issue also poses a challenge, with workaround options including:Lower the retentionBecause the partition size is generally defined as [max size] / [number of retention days], the first option is to lower the number of days to retain the data – the lower the retention, the lower the divisor and thus a bigger partition. For example, halving the retention from 14 to 7 days would halve the number of partitions, but double the partition size to ~850MB (e.g. [6200000000 bytes] / [7 days] = ~850GB partitions). Lowering it to 2 days would result in two ~3GB partitions… and so on.Recreate the LoggingDB with an increased sizeThe property MaxTotalSizeInBytes is exposed by OM code for the SPUsageDefinition object and can be updated with the example PowerShell snippet below. However, updating this value has no immediate impact because this size only applies when creating a LoggingDB. Therefore, you must create a newLoggingDB for the Usage Service Application. The gotcha: this effectively deletes all prior Usage databecause the Usage Service Application can only have a single LoggingDB.Here is an example snippet to update the "Page Requests" Usage Definition:$def=Get-SPUsageDefinition -Identity "page requests" $def.MaxTotalSizeInBytes=12400000000 $def.update()Create a new Logging database and attach to the Usage Service Application using the following command: Get-spusageapplication | Set-SPUsageApplication -DatabaseServer <dbServer> -DatabaseName <newDBname> Updated (5/10/2012): Once the new database has been created, you can confirm the setting has truly taken by running the following SQL Query (be sure to replace the database name in the following query with the name provided in the PowerShell above)SELECT * FROM [WSS_UsageApplication].[dbo].[Configuration] WITH (nolock) WHERE ConfigName LIKE 'Max Total Bytes - RequestUsage'

    Read the article

  • An update on using Rosetta Stone: Studio now isn't very useful and is not great value as an add-on option

    - by Greg Low
    I had a surprisingly large number of responses from my previous posting about learning Chinese. An update for those considering Rosetta Stone (www.rosettastone.com) for Chinese, Spanish or any other language that they offer:I had to renew my "Studio" subscription today and it's now a much worse deal than it was.It's now $75 for 6 months for Studio sessions. Online classes used to be 45 mins. Recently they reduced them to 20 mins. Given how often people have connection issues, etc. that 20 mins can disappear very quickly.They've also reduced the number you can attend. You used to be able to have 2 scheduled at any point in time. Now they limit you to 2 "group sessions" per month during the period. (You can pay for additional private sessions). The combination of these two changes now makes it much less useful. Two x 20 min sessions per month is an almost meaningless amount of practice. They also now automatically change you to auto-renew when you subscribe. They tell you where to remove this auto-renewal but the first 4 or 5 times that I went into that screen, no such option appeared. Later, an option did appear and I used it.Overall, things just aren't what they used to be at Rosetta Stone. It's now pretty hard to recommend the Studio option where it was a no-brainer before.FURTHER UPDATE: <sigh>Even after I renewed, I could not even connect to their "new" service. Although the system processed the renewal, it still tells me it's expired. My online chat person "Siva S" tells me that the problem is that I've purchased all 5 levels of the program. I can't wait till they explain to me how making an extra purchase from them stops me from logging on. Siva told me that they had "renewed" the program. I'd have to speak to Customer Care; they aren't available and then disconnected himself. Impressive (not).Their website is now full of issues too. It insists that my billing address is in the USA, even though it pretends to accept changes to it.Overall, it's gone from something that could be recommended (with some limitations) to now being an app to avoid. That's a pity as I liked much of it before.

    Read the article

  • Columnstore Case Study #1: MSIT SONAR Aggregations

    - by aspiringgeek
    Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014.  Many of these can be found in this deck along with details such as internals, best practices, caveats, etc.  The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps.  In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data.  The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR.  By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows.  New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly.  Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements.  Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data.  "Conventional vs. Columnstore Metrics" document the raw data.  Note on this linear display the magnitude of the conventional index performance vs. columnstore.  The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing.  I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Subsequent features in this series document performance enhancements that are even more significant. 

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >