Search Results

Search found 10279 results on 412 pages for 'video embedding'.

Page 313/412 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Is there a way to adjust colors of a specific window?

  - by Synetech

  Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

  Read the article

• Moved VM doesnt work correctly on my Ubuntu machine

  - by tinny

  Hi I have a Windows 7 VM that I have moved onto my Ubuntu 64bit host machine that is running VMware player 3.1.0. I think the VM was created on a Windows host. The problem I have is that when I login to this VM the screen goes blank and stays that way. The login screen is fine, but the desktop never correctly appears and sort of shows some strange pixelation that is all distorted. Seems like a virtual video card issue? If I boot into safe mode the desktop appears fine. Any ideas? Thanks

  Read the article

• Linux: how to "zoom" into a screen area à la Mac OS X?

  - by puccio

  It seems to me on Mac OS X it is possible to "zoom" (like a photocamera does) into a region of the screen. It is handy for example to put at full monitor size a video which would otherwise be limited to be just into a small window (ie. embedded in a web page and not watchable standalone.), obviously losing some quality due to the "zoom". Do you know of any tool or way to do the same thing on a Linux desktop (with Gnome as desktop manager if it is desktop manager dependant). Thanks in advance for any suggestion.

  Read the article

• Can I use Distant tv server with xbmc?

  - by Chiyou

  I want to use distant tv server with xbmc because it seems to work better then mediaportal. I have tried mediaportal only for 1-2 days but I get already a couple of problems. The Pinnacle software that comes with my usb stick and distant tv server is a superior solution. How can I get it work with xbmc? Or How can I map a remote control key to pctv and a remote control key to xbmc? I want to watch TV and browse my video files?

  Read the article

• building a home server with a nas appliance [closed]

  - by user51666

  Possible Duplicate: Best way to build home NAS with redundancy I was hoping to get some ideas from folks here. I'm interested in building a home web server with a nas appliance. It would be primarily used for storing pictures, video. I want a networked storage device so I can have multiple devices access it wirelessly as needed from within our home and also I want the option to access from outside the house using a login/pw access. I'm also interested in customizing, building my own web pages as well. Preferably apache. Any preferences? Does anyone have an interesting, neat set up they can share? Thanks!

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• How to play multiple videos side-by-side synchronized?

  - by Don Salva

  I've got 3 videos, all 3 have the same time, same amount of frames, and they only differ in terms of encoding quality. Now I need them to run side-by-side in synchronized fashion for evaluation purposes. Meaning when I press "play" BOTH! videos should start. Analogically for stop, forward, backward. Anyone know any player capable of doing that? By that I mean playing more than 1 video side-by-side... Platform: Win7

  Read the article

• What do I need to use an XBOX 360 with my PC monitor and speakers?

  - by heishe

  I've been thinking about getting an XBOX 360, mostly for games on XBLA or some exlusive titles, since they're relatively cheap now to get used. But I'm a student and live in a small apartment that has no TV, and no place to put a new TV (money to buy one wouldn't be a problem), so I've been thinking to use the console with my PC monitor and my speakers. My monitor only has HDMI and VGA input (no direct DVI), so I'm guessing I somehow need to split the audio and video signals coming from the XBox (or does the XBox have a direct 720p VGA output + external connectors for my speakers?). What do I need to make this happen?

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• Sharing RAM resources between 2 or more computers

  - by davee44

  I know there was a somewhat similar question before: How to share CPU or RAM? But, let me just specify it a little more... When Microsoft Windows requires more RAM capacity than available it uses a swap-file to temporarily store the data there, this is actually something like a hard-drive-based RAM. This technology is used for many years. Theoretically, it shouldn't be too hard to implement a similar technology that uses the RAM of different computer(s) in the network for temporary data storage. This just requires a software that runs on computers in the network that accepts and returns data from/to the main computer and keep that data in the RAM; plus the operation system of the main computer must have the ability to use computers in the network instead of (or in addition to) the swap-file. I wonder, are there any implementations of this idea? This would allow users to build RAM clusters using all of their home or office computers, that will boost the performance of a single computer for some development/gaming/video tasks, etc.

  Read the article

• Any script to replace Facebook "fake" links? (Facebook apps requiring installation before viewing content)

  - by Nicolas Raoul

  In Facebook, some links to articles or videos appear to be genuine links, but in fact there are leading to some "content viewing" Facebook apps, like "Dailymotion", "The Guardian", or "Yahoo!". Those apps usually require access to my email address, basic info, birthday, location, plus right to post on my behalf. Some even say in small letters "To use this app, you will be upgraded to Facebook Timeline": Workaround: Copy the name of the article/video Paste it into Google within quotes First result is the original unencumbered content. I don't want to install Facebook spyapps that provide zero value, so I do this every time. QUESTION:Is there a Greasemonkey script or similar, that would perform these 3 steps for me? I am using Chrome on Linux. I hesitated to post this question on WebApps, but over there they are clear that such questions should be posted on SuperUser.

  Read the article

• Ditto (clipboard manager): can't set shortcut of Win+<num>. Get “Error Registering Position 1”

  - by Jeff Kang

  Somone made a Youtube video on Ditto, and that person uses Win+Num to paste items from the list. He put a screenshot of his settings on Google Plus: When I try to do the same, which is to put “1” in the text field of Position 1, and check the “Win” box to add the Windows key as the sole modifier for the shortcut, which will be Win + 1, I get an error in that says “Error Registering Position 1” in a window titled CP_Main: Could it be because Win+Num conflicts with the natural Win+Num shortcut (starts the application pinned to the taskbar in that position, or switches to that program) of Windows 7? Thanks.

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Network Performance issue

  - by qubemarker

  We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

  Read the article

• Does Google Tv (NSZ-GS7) work with HTPC?

  - by Mark Trinh

  I was wondering if my Google Tv will seamlessly work with my HTPC. I'm running Windows Media Center using a InfiniTv quad tuner with a cable card. I'm able to connect my GTV with my HTPC and be able to see the GTV interface overlaid on top of media center. Unfortunately, I'm not really able to use the Tv/Movies App to look at live shows and change the channel. I have the Video device setup as Media Center PC, but then the Live Tv App doesn't work. If I change to my tv service provider (Verizon FIOS), the Live Tv App works, but then it won't be able to change the channel.

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

• Data unaccessible from WHS drive

  - by Eakraly

  Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

  Read the article

• Data unaccessible from WHS drive

  - by Eakraly

  Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

  Read the article

• GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

  - by Tendou Kishi

  This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

  Read the article

• use correct-resolution background desktop image

  - by Rob Bos

  I have a desktop background image (a picture) in a half-dozen different resolutions, that I'd like to deploy to a disparate collection of computers with different monitors and video cards and whatnot. Laptops, netbooks, desktops, widescreen, and even a couple of "tall" screens. I have images to cover most of the cases. I would like Windows 7 to correctly pick the correct desktop background image via group policy. Now, the logon screen is already done. The OEMBackground method is rather clever, and lets you copy files of different resolutions to the machine, and the logon app will calculate the aspect ratio of the monitor and match it to a file as closely as possible. Is there any way to have that functionality on the desktop background as well?

  Read the article

• Create a home virtual network

  - by Tom Lisc

  I can't seem to get answers to this question. I want to setup up 2-3 computers in my house to run Linux based virtual machines fed from my dedicated Arch Linux server. I need them to have full sound and video support. At my workplace we use VMware (View), but that is too cost prohibited for me to deploy for my wife and the two 10 year olds. I have tried Virtualbox machines and they are fine, but I cannot get sound working. Any help/hints would be greatly appreciated.

  Read the article

• 100% CPU in QuickTime H.264 decoder on Windows on Win7, except when using XP compat. mode

  - by user858518

  I have a Windows program that uses the Apple QuickTime API to play video. On Windows 7, CPU usage is 100% on one core, which I believe is why the playback is choppy. If I turn on XP compatibility mode for this program, the CPU usage is around 20% of one core, and playback is normal. Using a profiling tool called Very Sleepy (http://www.codersnotes.com/sleepy), I was able to narrow down the high CPU usage to a function in the QuickTime H.264 decoder called JVTCompComponentDispatch. I can't imagine why there would be a difference in CPU usage when XP compatibility mode is turned off or on. Any ideas?

  Read the article

• VLC stream with trickplay

  - by marjasin

  The idea is to start a video stream from one computer and watch it on another with the ability to start/stop the stream. I think I could do this with VLC but i haven't been able to figure out how. I've tried the following: (From the official forum) Stream with RTSP and RTP: on the server, run: % vlc -vvv input_stream --sout '#rtp{dst=192.168.0.12,port=1234,sdp=rtsp://server.example.org:8080/test.sdp}' on the client(s), run: % vlc rtsp://server.example.org:8080/test.sdp But this doesn't give me the ability to start/stop the stream from the client. According to the VLC release note something called "Trick play" was added in version 1.0. This seems to be what I'm looking for but i can't find any documentation that descibes how to use it.

  Read the article

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >