Search Results

Search found 24383 results on 976 pages for 'configuration testing'.

Page 316/976 | < Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Custom LightDM sessions to launch an application

  - by zachtib

  I'm trying to set up Ubuntu to act as a kiosk running a custom application, and am trying to get a LightDM session built to automatically start it. Ideally, I'd like to have two sessions available from LightDM. The default would start my application fullscreened, and the other would open a minimal desktop in case any configuration (mostly connecting to a wireless network) needed to be done. I've done a lot of research over the last week on custom LightDM & Gnome sessions. I've got a custom greeter written for LightDM that can start either session, but I can't figure out how to add a specific application to the Gnome session that is ultimately started without just putting a launcher in the global startup directory, and I don't want to do that since I don't want the application starting when they open "configuration mode". Another problem I've run into on my current workaround is that the application doesn't fullscreen properly, which makes me think I'm not starting enough of a gnome session (currently it's just metacity, no panel or anything else). Edit: I found a solution. See http://www.webupd8.org/2011/11/make-applications-autostart-only-in.html

  Read the article

• growing EBS RAID volume

  - by Ryan Fernandes

  I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. EDIT: trying to grow the RAID using mdadm --grow yields mdadm: raid0 array /dev/md0 cannot be reshaped Is there any other way I can grow a RAID0 array?

  Read the article

• Why all of my ports are not open or reachable? how can i open them

  - by Rev3rse

  I was testing the ports because WoW(3724 TCP 6112 TCP 6881-6999 TCP) couldn't connect to the internet so i downloaded PFPortChecker application and run it using Wine(1.3) and after i tried to check every port it seems like it's not reachable/closed why is that? my firewall is off so why is this happening? how can i open these ports? and how can i see if these ports are opened or not and the important thing is how can i know which application is using them

  Read the article

• How to switch your small or home office to Linux

  <b>Wine-Reviews:</b> "With Linux and free software making a name for itself in the world of big business, many people are testing the feasibility of switching small and home office software to their open source equivalents."

  Read the article

• Working with Active Directory and Windows Small Business Server 2008

  - by AreYouSerious

  I have to say that in most of my time as a network engineer I have had the opportunity to play with servers, but mostly it's been to put our management software on, and that was about it. I have been a Systems Network Engineer for about three months now, and as such I have been respnosible for the configuration of our test devices... this being said, I have had to start working through how to configure and apply such things as GPO through a new forest, domain and OU. This being said I have configured about three different GPO's and applied them to different locations. The first laptop that I brought into the domain took the default Domain group Policy... this was cool, I got excited... then When I tried to bring in the second Laptop, it didn't take the policy. I looked at the configuration, and the default domain policy was applied to domain computers, however since the laptop resides in the SBS Computers of the OU that was created, SBS created individual policies for XP and Vista for that OU, which I was unaware of. So the default policy for that ou overrode the domain policy and none of the options that were defined in the Domain policy were applied... this being said, I am now working on putting the default Domain as an applicable policy in the OU, thus I won't have to reconfigure another policy to mirror the Domain Policy... here goes nothing!!!.... More to follow Later.

  Read the article

• Reasons to Use a VM For Development

  - by George Stocker

  Background: I work at a start-up company, where one team uses Virtual Machines to connect to a remote server to do their development, and another team (the team I'm on) uses local IIS/SQL Server 2005/Visual Studio installations to conduct work. Team VM is located about 1000 miles from Team Non-VM, and the servers the VMs run off of are located near Team VM (Latency, for those that are wondering, is about 50ms). A person high in the company is pushing for Team Non-VM to use virtual machines for programming, development, and testing. The latter point we agree on -- we want Virtual Machines to test configurations and various aspects of the web application in a 'clean' state. The Problem: What we don't agree on is having developers using RDP to connect to a desktop remotely that contains Visual Studio, SQL Server, and IIS to do the same development we could do locally on our laptops. I've tried the VM set-up, and besides the color issue, there is a latency issue that is rather noticeable, not to mention that since we're a start-up, a good number of employees work from home on occasion with our work laptops, and this move would cut off the laptops. They'd be turned in. Reasons to Use Remote VMs for Development (Not Testing!): Here are the stated reasons that this person wants us to use VMs: They work for TeamVM. They keep the source code "safe". If we want to work from home, we could just use our home PCs. Licenses (I don't know what the argument is, only that it's been used). Reasons not to use Remote VMs for Development: Here are the stated reasons why we don't want to use VMs: We like working from home. We get a lot done on our own time. We're not going to use our Home PCs to do work related stuff. The Latency is noticeable. Support for the VMs (if they go down, or if we need a new VM) takes a while. We don't have administrative privileges on the VM, and are unable to change settings as needed. What I'm looking for from the community is this: What reasons would you give for not using VMs for development? Keep in mind these are remote VMs -- this isn't a VM running on a local desktop. It's using the laptop (or a desktop) as a thin client for a remote VM. Also, on the other side of the coin: Is there something we're missing that makes VMs more palatable for development? Edit: I think 'safe' is used in term of corporate espionage, or more correctly if the Laptop gets stolen, the person who stole would have access to our source code. The former (as we've pointed out, is always going to be a possibility -- companies stop that with litigation, there isn't a technical solution (so far as I can see)). The latter point is ( though I don't know its usefulness in a corporate scenario) mitigated by Truecrypt'ing the entire volume.

  Read the article

• Easily manage vsftpd virtual users?

  - by Phil

  I have a vsftpd server configured with many virtual users. logins are stored in a Berkeley DB file One configuration file exists for each user to define his permissions (read-only or read-write, home directory, etc.). To do that, I use the user_config_dir parameter (set in vsftpd.conf). I am wondering if it would be possible to manage these virtual users from a simple GUI (such as web interface). I have found some tools but they are limited to generic vsftpd configuration, not virtual users management. Otherwise, PAM-MySQL seems to be a good way to manage users efficiently but only username/password and logs can be stored in database, not permissions. Finally, I've found this thread, but the solution is a bit awkward... Is there any way to easily manage the vsftpd users ?

  Read the article

• How do I get a new license for gDEBugger after the 1 free year?

  - by Byte56

  I downloaded the gDEBugger from gremedy over a year ago, with their one year free license. The license has since expired and their site says that I'll be presented with the option for 1 year free license the first time I run it after install. This doesn't happen when re-installing, it just tells me the license has expired. How do I get a new license? I use this regularly for debugging shader problems and performance testing my game.

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• What are some good online tech talks?

  - by Avi

  We have a weekly tech talk at work, where we try to either have one of the developers present some subject, or watch a video or other presentation. The subjects can be anything related to software development (or anything else, if it is particularly interesting), but we have tended recently to focus on software development methodology, such as unit testing, and technologies, such as NoSQL. What are some good online presentations to watch, especially those related to software development?

  Read the article

• Driver for asus wireless PC card WL-100GE

  - by emab

  I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Test-only Members: Good or Bad?

  In the article, Dino focuses on two particular situations: dealing with dependencies and testing private members. He'll be discussing this in the context of ASP.NET MVC and MSTest, but without any significant loss of generality.

  Read the article

• IIS7 folder permissions

  - by Eanna

  I build a basic WCF service that I now want to host in IIS7 under Windows Server 2008 R2. I added the service as an application under the default web site but whenever i try to run the application I get the following error: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Config Error - Cannot read configuration file due to insufficient permissions The only way I can get this service working is if i choose to "connect as" the server Administrator when adding the service. the "application user (pass-through authentication)" option does not seem to work. Could anyone help me out, I've just started using IIS7 and have no idea what to do... Thanks

  Read the article

• How to enable systemd instantiated service with puppet?

  - by Richard Pena

  I've got the following puppet service: service { "[email protected]": provider => systemd, ensure => running, enable => true, } When I try to apply this configuration on my client, it throws the following error: err: /Stage[main]//Node[puppetclient]/Service[[email protected]]/enable: change from false to true failed: Could not enable [email protected]: The service is running fine and I can make sure it's started on system boot by adding a symlink to getty.target.wants: ln -s /lib/systemd/system/[email protected] /etc/systemd/system/getty.target.wants/[email protected] Of source, I could go ahead and remove "enable = true" from the service definition and include a the symlink manually in the puppet configuration, but shouldn't puppet take care of this? Am I doing something terribly wrong?

  Read the article

• SSH automatic logon works for one user but not the other

  - by tinmaru

  I want to enable automatic ssh login using the .ssh/config file for my git user. Here is my .ssh/config file: Host test HostName myserver.net User test IdentityFile ~/.ssh/id_rsa Host git HostName myserver.net User git IdentityFile ~/.ssh/id_rsa It works for my test user but not for my git user so my global SSH configuration is correct. The configuration are exactly the same as far as I know. It used to work with git user but I'm unable what change has broken the automatic logon. When I type: ssh -v git I get the following log: ... debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey Offering RSA public key: /Users/mylocalusername/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: _ Does anyone know what could be a possible difference

  Read the article

• SQL connection is too slow

  - by user66905

  We have a business web application in ASP.NET + SQL Server 2008. In the beginning, SQL Server and IIS were on the same machine. Now we bought another machine. Current configuration is IIS machine plus SQL Server machine, and they are connected by a 1gb LAN connection. With this configuration our web application is slower than before. Max bandwidth is 1-2% of network, about 15mbps. When we use another threads to the same SQL Server from the same IIS machine, network use is higher. So this is no problem with SQL Server. Ho we can make higher bandwidth for this SQL connection? Specs: .Net 3.5 SQL Server 2008 Standard file transfer can use 100% of LAN SQL connection by TCP/IP protocol SQL logins Pool tested with enable and

  Read the article

• Logs being flooded from Squid for having intercepted and authentication enabled together

  - by Horace

  I have done some hefty Google'ing and I can't seem to find a single solution to this issue that I cam currently experiencing. Here is a sample configuration from squid that I have: # # DIGEST Auth # auth_param digest program /usr/sbin/digest_file_auth /etc/squid/digpass auth_param digest children 8 auth_param digest realm LHPROJECTS.LAN Network Proxy auth_param digest nonce_garbage_interval 10 minutes auth_param digest nonce_max_duration 45 minutes auth_param digest nonce_max_count 100 auth_param digest nonce_strictness on # Squid normally listens to port 3128 # Squid normally listens to port 3128 http_port 192.168.10.2:3128 transparent https_port 192.168.10.2:3128 intercept http_port 192.168.10.2:3130 As noted above, I have three ports defined, 2 of them are transparent/intercept and one is a regular http port (which I use for authentication). Which works rather well in this configuration however my logs are getting flooded of this entry authentication not applicable on intercepted requests whenever a transparent connection is made. So far, I can't seem to find any documentation that would describe how to suppress these messages ?

  Read the article

• OpenSUSE Li-F-E vs. Edubuntu vs. Ubuntu

  <b>ZDNet:</b> "As I noted in my post over on Between the Lines (&#8221;Why doesn&#8217;t IBM just buy Novell already?&#8221;), I&#8217;ve been testing OpenSUSE&#8217;s Linux for Education Project and Ubuntu 10.04 server beta 1."

  Read the article

• Web server replica not working in other server

  - by user761076

  I have a Drupal installation (php+mysql) in a server, and I'm trying to copy this installation to another server with the same configuration, same physical and virtual path, same db configuration, etc. The thing is, in my new server I get the homepage to work, but not the inner pages, so I guess has something to do with rewrite (mod_rewrite is installed) (both .htaccess are the same). When I access http://localhost/myweb/content/mypage I get a 404 or a "Forbidden" if I uncomment this in httpd.conf (original httpd.conf does not have this entry): <Directory path/to/docs"> DirectoryIndex index.php index.html Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Any clue? Thank you

  Read the article

• Overrideen ASPNet.config does not apply for legacyImpersonationPolicy

  - by Grumbler85

  I tried to override the <legacyImpersonationPolicy> Element, so a single application, will enable this policy (which is necessary, since this application breaks if disabled). So my Framework64/aspnet.config states: <configuration> <runtime> <legacyUnhandledExceptionPolicy enabled="false" /> <legacyImpersonationPolicy enabled="false" /> <alwaysFlowImpersonationPolicy enabled="false" /> <SymbolReadingPolicy enabled="1" /> <shadowCopyVerifyByTimestamp enabled="true"/> </runtime> <startup useLegacyV2RuntimeActivationPolicy="true" /> </configuration> And a local aspnet.config file has this change: <legacyImpersonationPolicy enabled="false" /> Procmon tells me the file is read by the w3wp.exe, but the settings will not apply. Can anyone point out a way how to correctly override the setting? *The Server has been restarted meanwhile, but still no changes.

  Read the article

• How to customize live Ubuntu CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Thanks in advance! Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Note I do not prefer Remastersys, manual way will be appreciated. updates I want the panel to be placed at the bottom. I want to paste my samba configuration file instead of default samba configuration. And i have few firefox shortcuts and Folders, i have to show that in Desktop. Also it will be nice if you say me how to change the icon sets. Recent Updates I have customized ubuntu 10.10 with firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• Allowing users in from an IP address without certificate client authentication

  - by John

  I need to allow access to my site without SSL certificates from my office network and with SSL certificates outside. Here is my configuration: <Directory /srv/www> AllowOverride All Order deny,allow Deny from all # office network static IP Allow from xxx.xxx.xxx.xxx SSLVerifyClient require SSLOptions +FakeBasicAuth AuthName "My secure area" AuthType Basic AuthUserFile /etc/httpd/ssl/index Require valid-user Satisfy Any </Directory> When I'm inside network and have certificate - I can access. When I'm inside network and haven't certificate - I can't access, it requires certificate. When I'm outside network and have certificate - I can't access, it shows me basic login screen When I'm outside network and haven't certificate - I can't access, it shows me basic login screen and following configuration works perfectly <Directory /srv/www> AllowOverride All Order deny,allow Deny from all Allow from xxx.xxx.xxx.xxx AuthUserFile /srv/www/htpasswd AuthName "Restricted Access" AuthType Basic Require valid-user Satisfy Any </Directory>

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

< Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >