Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 319/444 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• vncviewer connection refused (61)

  - by coure2011

  I have a root access to VPS (centos 6). I have installed VNCServer using this guide line http://tournasdimitrios1.wordpress.com/2011/02/02/how-to-setup-vnc-server-on-centos-5-x-fedora-11/ Everything goes perfectly and server is running via termina. Now I am trying to connect to that server via vncviewer (mac os). but its giving me error Connection refused (61) I am providing only the IP address of the VPS, maybe I also needed port address? How to configure port on vncserver? or its something else?

  Read the article

• IE8/IE7/IE6/IE5 on WinXP Use The Wrong Certificate

  - by Marco Calì

  For some reason IE8/IE7/IE6/IE5 on Windows XP, instead to use the certificate that is listed on the nginx website config, is using another certificate that is used from other websites. Checking the nging config file for the website everything is fine. A confirm of this is that all the other browsers (Chrome/Firefox/Safari/IE9) are using the correct certificate. This is the nginx configuration for the app: server { listen 80; listen 443 ssl; server_name mydomain.com; ssl_certificate /root/certs/mydomain.com/mydomain.bundle.crt; ssl_certificate_key /root/certs/mydomain.com/mydoamin.key; access_log /opt/webapps/cs_at/logs/access.log; location / { add_header P3P 'CP="CAO PSA OUR"'; proxy_pass http://127.0.0.1:20004; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header X-Real-IP $remote_addr; } }

  Read the article

• How can I run a game server on a computer behind a NAT, if I have another computer not behind a NAT?

  - by Macha

  My home connection is part of a large NAT, outside my control. Inside my home, my router has a NAT, under my control. I control a public facing Linux VPS with one IP address, outside my home network. Ideally, what I'd like to do is set something up so that I connect my home computer to my VPS, and after that port X on my VPS leads to port Y on my home computer, for the purposes of running a game server of a game that does not run under Linux. Is this possible?

  Read the article

• Terminal Server 2003 Performance Troubleshooting

  - by MikeM

  Let me get your thoughts on terminal server performance problems. The server hosts average 25 users which, after running some numbers, on average use 600MB memory with their main applications running (web browser, adobe reader, IP phone client). All users are on the same LAN as server. We constantly experience slow response and short session lockups. Combined CPU usage is on average 10%. What appears strange to me is that the system shows 29GB physical memory with 25GB of it free. The page file usage is about 50% averaging 9GB used. Some server specs OS: Server 2003 32bit Enterprise with /PAE flag RAM: 32GB CPU: 2xQuad Core @ 2.27Ghz HD: RAID5 1.2GB After doing basic troubleshooting using performance monitor it leads me to believe that the performance problems are caused by the 32bit OS limitation in addressing full 32GB of physical memory even though the /PAE flag is used. Can anyone suggest something, troubleshooting steps that can lead to a more conclusive answer? Thanks

  Read the article

• MySQL will Stop working after being Started

  - by user115343

  i am new to a webserver thing. I use Centmin mod to install nginx + mariaDB to setup small wordpress blog,the first day it is ok,there are nice "hello world" on my box's IP,but today i have checked that mysql is stop working so i immediately start it again but it is stoped again after some minutes! i use this tutorial but still,it will stop after some period here is my log [root@rylai ~]# tail -f /var/log/mysqld.log 120326 16:19:05 [Note] Plugin 'PBXT_STATISTICS' is disabled. 120326 16:19:05 [Note] Plugin 'InnoDB' is disabled. 120326 16:19:06 [Note] Event Scheduler: Loaded 0 events 120326 16:19:06 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.2.10-MariaDB-mariadb107' socket: '/var/lib/mysql/mysql.sock' port: 3306 (MariaDB - http://mariadb.com/) 120326 16:20:36 mysqld_safe Number of processes running now: 0 120326 16:20:36 mysqld_safe mysqld restarted 120326 16:20:39 [Note] Plugin 'ARCHIVE' is disabled. 120326 16:20:39 [Note] Plugin 'FEDERATED' is disabled. 120326 16:20:40 mysqld_safe mysqld from pid file /var/lib/mysql/rylai.pid ended I only access mysql on CLI,didnt install any panel yet

  Read the article

• Apache: How can I make my localhost on 192.168.1.101 visible from 192.168.1.102?

  - by takpar

  Hi, I've setup a Apache web server on Ubuntu Linux. I can see http://localhost well. But I can't see localhost from other machines in my network using IP address: http://192.168.1.101 I added the lines below to my apache conf: `Allow from 192.168.1` but it did not work. It says "the connection has timed out". what should i do? PS: adp@adp-desktop:~$ sudo netstat -ap | grep apache tcp 0 0 *:www *:* LISTEN 10581/apache2 tcp 0 0 localhost:www localhost:46017 ESTABLISHED 10586/apache2

  Read the article

• Access Denied on LAN IIS Access via Integrated Authentication

  - by Pharao2k

  I have an IIS 7.5 (Win2k8R2) Webserver, which publishes an UNC Share (on a Fileserver) with restricted access. The AppPool Identity is a Domain User-Account with read access to mentioned UNC path. Authentication modes are set to Anonymous and Integration Authentication. When I access the path via localhost from the Webserver itself, it works, but if I try the Hostname or IP from either the Webserver or a Client, I get three authentication prompts (does not accept my credentials) and a 401.3 Unauthorized error message (but it states that I am logged in as my normal credentials which definitely have access rights to the UNC path and its files). Security Zone is set to Local Intranet. Sysiniternals Process Monitor lists CreateFile operations on the UNC path (and other existing files in it) with Access Denied and Impersonating on the correct credentials. I don't understand why it is not working, it seems to use the correct credentials on every step on the way but fails with is operations.

  Read the article

• disable browser localization

  - by broiyan

  How do I get the websites that I visit to stop localizing the language probably according to my IP location? This is an website specific issue because, for example economist.com and superuser.com do not do it, but Google Checkout and craigslist.org are doing it. Is there a way to setup Ubuntu and Firefox so that English will always be used for all web pages displayed? Edit: Of course many webpages have a link to an English version, but sometimes they don't. For example I believe such links usually appear on the root resource but sometimes I see non-English languages on child resources where such links do not appear. Example: most Blogger.com blogs appear in English but when I go to the blogger's profile ("view my complete profile"), it appears in another language that matches my geographic location.

  Read the article

• ASP.NET directories blocked from VisualSVN Server behind reverse proxy in IIS 6

  - by user143344

  I’ve got VisualSVN Server running behind a reverse proxy in IIS 6, Windows Server 2003. This isn’t ideal, but for the main web app on the server I’ve only got one IP address and SSL certificate available. Everything works except for when trying to commit to or browse the default ASP.NET directories (App_Browsers, App_Code, App_Data). SVN commits fail for these directories – which I believe is because IIS will never serve them by default. The reverse proxy uses a virtual directory in IIS – is there a change I can make in the web.config for this virtual directory to get around the issue?

  Read the article

• Fortigate VPN Routing issue

  - by user1571299

  I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a VPN ontop of WAN2 with that specific site as it's destination. The default route for my end is WAN1. My problem is I cant figure out how to have both tunnels up at the same time. What's the best practice for achieving this? Thanks

  Read the article

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• nginx: rewrite URL but have original URL stored in access.log as 200

  - by mhambra

  I'm setting up a link tracking system, which (temporarily) involves adding /link/id/ in front of URL (like http://server/data/id/publication/id/). rewrite data/id/(.*) http://server/$1; The request is logged as: ip - - [17/Nov/2011:10:07:19 +0300] "GET /data/id/publication/id.html HTTP/1.1" 302 154 "-" "UA"` For some reason (keeping the compatibility with AWStats) it is wanted to have 200 logged instead of 302. (nginx allows to get 301 code out of box with permanent option, but thats inappropriate too) What are my options here? Will the combination of location { } and rewrite do the job?

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• Can't access dfs namespace over vpn

  - by cpf

  Hi Serverfault, I've recently configured 2 servers in AD on the same domain level. They are physically separated and permanently connected through a site-to-site vpn for dfs replication. All well, but when users connect to either site through vpn (from home e.g.) they can't use the domain level method: \\domain.com\data Internally this works perfectly, resolving domain.com when connected through vpn gets the correct IP. I've tried Google to figure things out. What I was able to find was that more people have this issue, no real solution found though. Can anyone explain why this is happening? Especially a solution would be really helpful! Thanks in advance.

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Serve my website from different server during downtime

  - by nfedyashev.mp

  I have a VPS server running in the cloud. Fully automated server image upgrade/downgrade(by RAM/HDD plans). The problem is that server upgrade/downgrade takes time and involves total unavailability during this period(up to 30 minutes). Goal: during this downtime server my website(http://mydomain.here) from different server with some message like "Under construction". How can I do this? -- mydomain.here is hosted on godaddy and uses its DNS(If I call it right). It's pointing with A-record to my VPS's IP address now. Change in these DNS settings will take more than 30minutes, so it's not an option. How can I find mode "dynamic" DNS? What should I learn?

  Read the article

• DNS Zone file and virtual host question

  - by Jake

  Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. Any advice would be great and if you need more info to answer the question, don't hesitate to ask.

  Read the article

• Cannot SSH into Amazon EC2 instance

  - by edelwater

  I read: Cannot connect to ec2 instance http://stackoverflow.com/questions/5635640/cannot-ssh-into-amazon-ec2-instance Amazon EC2 instance ssh problems etc... But could not fix it: suddenly (after a year of service, no changes on my winscp settings) it gives me "network error connection timed out" (im using ec2-user) (also from the amazon console). Log FILE: http://pastebin.com/vNq6YQvN All Sites that run on it run fine port 22 is allowed (never changed it) (security group) using the correct ec2-user and domain via my winscp / putty i can connect to other hosting (via ssh) update: SOLVED. I spend 2 days without looking at my own IP address .... (since it did not change the past 3 years....). Your comments made the spark in my brain. thank you so much. (and only now i find dozens of discussions from angry users that the static addresses from my provider are changed to dynamic ones: http://gathering.tweakers.net/forum/list_messages/1501005/12 ...)

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• How does Apache handle port forwarding?

  - by vfclists

  I setup a localhost portforwarding configuration in the coLinux .conf file, forwarding port 8090 to port 80 in the VM. When http://localhost:8090 is entered in the browser, I get the correct response from nginx, but with Apache the response get the error /htdocs not found in the log. However if I do a local port forwarding from 8090 to port 80 via SSH Apache responds fine. Is there something about the way Apache handles the port redirection that causes it to fail? PS, For those unfamiliar with coLinux it allows localhost connections to get to the VM by forwarding localhost ports on the Windows host to ports on the VM, as the 10.x.x.x IP it not accessible from the Windows host.

  Read the article

• Best way to monitor host

  - by Axle

  I have just set up a host which receives messages from 300b to 1500b (wrapped stx etx)and replies with the same. It works fine but some times it receives junk data. Is there anyway to monitor this out of band data just so we can make sure we are not receiving massive amounts of it. Also is it possible to monitor if connections time out - where the host did not reply in time or long connections where it takes the host 20 seconds to reply when it normally takes 5. I am aware of IP monitor but I don't think it covers enough - Is there anything else or any other way? Thanks in advance!

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >