Search Results

Search found 11674 results on 467 pages for 'adding'.

Page 320/467 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• Giving two different users permissions to a dir

  - by Jason Swett

  I have a script that is run sometimes via the web, sometimes via the command line. When the script is run via web, it's run via user www-data. When it's run via command line, it's run via user jason. This script writes to a directory called cache. If I chown -R jason cache, I can run the script as jason but not www-data. This makes sense. If I chown -R www-data cache, I can run the script as www-data but not jason. This also makes sense. I tried creating a group called scripts, adding my two users, then chowning cache to scripts. I'm not really sure how to do the last part, the chowning part. The Linux command docs I've found online for this are astoundingly bad. I don't know if I explained this all that well but hopefully it's clear what I'm trying to do. Any advice would be appreciated.

  Read the article

• puppet master --compile logs errors to stdout

  - by danny

  I see a bug about this that was accepted and then closed a year ago: http://projects.puppetlabs.com/issues/3670 but I'm using puppet 2.7.14 and am getting the same issue. I'm trying to use "puppet solo" (i.e. just running puppet apply on each server to be configured) as I only have 2 or 3 servers in this project and adding another server as a puppetmaster would be completely overkill. Unless I'm mistaken, the best way to apply a node manually to a server is to do: puppet master --compile=mynode > catalog.json puppet apply --catalog catalog.json But the puppet master command outputs a couple of warnings and notices to stdout, mixed in with the desired json content. And it uses colored output so I can't just pipe it through egrep -v '^warning:' EDIT: I guess it's not too big of a deal to use grep - since puppet 2.7 pretty-prints the actual content and the warnings don't ever start with spaces, piping the output through egrep '^( |{|})' works So my questions are basically: Is there a better way than this to apply a puppet node without using a puppetmaster? I can't really find any good references online to using puppet without a puppetmaster, even though that seems like a perfectly reasonable thing to do for a small project. Is there a setting or flag that I'm missing that will get puppet master to stop being an asshole and send its errors to stderr instead of stdout? Or do I really have to turn off color logging, then grep to exclude warning: and notice: lines?

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• Recompiling Nginx 1.4.3 with "--with-http_gzip_static_module" error

  - by Elijah Paul

  I'm trying to enable the 'ngx_http_gzip_static_module' module in Nginx 1.4.3 by adding the --with-http_gzip_static_module to my ./configure configuration. But I recieve the following error when i try to recompile (make): # make make -f objs/Makefile make[1]: Entering directory `/tmp/nginx-1.4.3' make[1]: *** No rule to make target `src/os/unix/ngx_gcc_atomic_x86.h', needed by `objs/src/core/nginx.o'. Stop. make[1]: Leaving directory `/tmp/nginx-1.4.3' make: *** [build] Error 2 My current config (CentOS 6.4): # nginx -V nginx version: nginx/1.4.3 built by gcc 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) TLS SNI support enabled configure arguments: --conf-path=/etc/nginx/nginx.conf --pid-path=/var/run/nginx.pid --error-log-path=/var/log/nginx/error.log --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --http-log-path=/var/log/nginx/access.log --with-http_ssl_module --prefix=/usr --add-module=./nginx-sticky-module-1.1 --add-module=./headers-more-nginx-module-0.23 i was under the impression that this was a module that just need to be 'enabled' as opposed to 'added'. What am I missing here?

  Read the article

• Change the default program for a filetype to something not in "Program Files" in Windows Vista

  - by Carson Myers

  I'm trying to make my python scripts run in python 2.6 by default when run from the command line. This is paired with adding certain scripts to the PATH variable and .py to PATHEXT for convenience. But I'll be damned if I can get the file type association to work. In the default programs dialog (found in control panel) I find .py, and click "Change Program." This gives me the same dialog as clicking "Open with..." on a file's context menu. I search for python. Tell it to use python, but it doesn't add it to the list of programs I am allowed to use. I tried making a shortcut to python in Program Files, but that won't work either. If I copy python into a folder in Program Files, then that works. But why can't I just point it at C:\python26\python.exe (which is in the PATH variable) in the first place? Is there a way around this, or do I have to just reinstall python into Program Files?

  Read the article

• How do I host multiple independent, secured SharePoint sites (WSS 3.0) without using Active Directory on the same server?

  - by Kyle Noland

  I have a SharePoint site set up on one of my networks to service Active Directory users. To be clear, this is a Windows SharePoint Services 3.0 installation running on Windows Server 2003 Standard. It is not an option to upgrade the server or SharePoint version. Management would like to create several new sites, one for each of a handful of clients. These sites will be used like "dropboxes" or FTP sites so that my company can make large files available to outside contacts, and vice versa. Here are my requirements: I do not want to have to create Active Directory accounts for each external contact. If possible, I would like to store the external usernames and passwords in a database that I can write a small GUI for so that management can handle adding their own external contacts. Each client site must be sandboxed from each other and from my main company SharePoint site. I would like to keep everything running on port 80 and be able to access the sites as either clientname.mycompany.com or www.mycompany.com/clientname If anybody has ever done this I would really appreciate hearing about any lessons you learned and suggestions for how to set this up. Kyle

  Read the article

• Songbird looping my library playlist

  - by Logi

  I'm using Songbird (on Windows) as my iTunes replacement. There's two things that annoy me about Songbird: 1) It has a web browser built in. I can ignore this as I don't use it. But, seriously, a web browser? :/ 2) It loops my library. This, I don't like. The way I play my audio is by launching Windows Explorer, navigating to my media library and double clicking on a single MP3. I only want to hear that one MP3. I don't use the Media Import function in Songbird - Or any other media player. But it insists on adding every song I play to the Library. Disabling this would be excellent but, falling short of that, I'd at least like to stop it repeating every song in the library. When Songbird finishes playing the last song in the Library (which is the song I just opened via Windows Explorer (gets appended to the library)), it jumps to the top of the library and starts playing all the songs again. How can I stop this? Songbird is set to 'Repeat none'

  Read the article

• Exim 4 Virtual Domains and Catchall on Debian (Squeeze)

  - by parazuce

  Hello, I've been at it for about 4 hours now. Searching as well as trying different tutorials. Here's my setup: I have 2 domains, both under my own DNS server (MX records setup as well). I have exim4 successfully running, and it is able to send messages from both of those domains. I have tested this using sendmail, and manually setting the "From" attribute. Exim successfully delivers mail to users no matter which domain was specified. I'm fine with that, but I'm having an issue editing virtual domains, and adding custom delivery options (such as a catch all). I've been searching for about 4 hours, and I can't find any up-to-date documentation on how to do this. The old methods would be to add a line such as: domainlist local_domains = @:localhost:dsearch;/etc/exim4/virtual Once that line was added, I made a directory at /etc/exim4/virtual, then created files inside such as example.com which would then contain rules for delivery under that domain. This did not work, however. Searching further, I've found that exim no longer supports dsearch (I guess because they claim it never has?) This is where I'm stuck. I'm on a "split" configuration as well.

  Read the article

• NTFS: Deny all permissions for all files, except where explicitly added

  - by Simon

  I'm running a sandboxed application as a local user. I now want to deny almost all file system permissions for this user to secure the system, except for a few working folders and some system DLLs (I'll call this set of files & directories X below). The sandbox user is not in any group. So it shouldn't have any permissions, right? Wrong, because all "Authenticated Users" are a member of the local "Users" group, and that group has access to almost everything. I thought about recursively adding deny ACL-entries to all files and directories and remove them manually from X. But this seems excessive. I also thought about removing "Authenticated Users" from the "Users" group. But I'm afraid of unintended side-effects. It's likely that other things rely on this. Is this correct? Are there better ways to do this? How would you limit the filesystem permissions of a (very) non-trustworthy account?

  Read the article

• How to keep Ubuntu 11.10 and Kate editor w/terminal from changing command line when changing tabs?

  - by Kairan

  I am programming C using Kate editor in Ubuntu 11.10. It works great, but when I change tabs in Kate, the terminal line changes to the file path of the tab I click on. Normally this is not a big deal (other than annoyingly adding extra text to my terminal) however if I am currently RUNNNING a C program, it obviously will type at the command line, which is not so cool. Example terminal window for my C program (its at a menu): 1) select opt 1 2) select opt 2 Enter choice: (here it waits for prompt from user) Now when I click a tab in Kate, it wants to put in the cd / path of the file in that tab, such as: cd /home/user/os/files And of course since my terminal was waiting for prompt from user it gets that command.. not good. Perhaps there is no fix, but maybe someone knows? Obviously I could choose NOT to switch tabs or end program before switching tabs... Note: I probably made the mistake of putting this under StackOverflow which is more of a programming area - so though repost here might be best (I am not sure how to link the questions but will paste hyperlink to that post - I dont want to violate any stackoverflow/superuser violations) Suggestions on merging them are welcome or if I should delete one? StackOverFlow Question

  Read the article

• Godaddy domain and Bluehost web hosting

  - by Digital site

  I have a domain from Godaddy and web hosting at Bluehost. I want to make this work as some people say no need to transfer the domain from Godaddy to Bluehost. I was trying to find out how to get this work out by adding name servers for Bluehost ns1.bluehost.com ns2.bluehost.com at Godaddy. This works fine, but not sure if 100% OK yet. The reason why I say that is when I type in my address name on any browser this way: mydomain.com it doesn't work. Instead I get an error message stating that this server is not found or couldn't connect to it... However, when I write the domain name and include the www. prefix it works fine... The other problem is when I search in google or yahoo, the domain shows like this: mydomain.com , which is not really good because my clients think my site is down because of the error message, and most new people don't know if they have to add www. to the domain to work. I just want to make at least the domain works like this: mydomain.com

  Read the article

• Does WebDAV even work on IIS 7? I say nay

  - by FlavorScape

  I've tried every configuration from the top 10 stack overflow and server fault results for WebDAV 405 on IIS (for verb PROPFIND and PUT). I'm running server 2008 SP2. Followed all the instructions here. I'm no stranger to configuring servers. This has gotten nowhere after 8 hours. Confirmed system.webserver in applicationhost.config: <add name="WebDAV" path="*" verb="PROPFIND,PROPPATCH,MKCOL,PUT,COPY,DELETE,MOVE,LOCK,UNLOCK" modules="WebDAVModule" resourceType="Unspecified" requireAccess="None" /> Port 443 with basic auth, same issue. Tried port 80 with windows auth. Broken. (405) Windows authentication. Check. Added authoring rules for default site and application. Check. Not the firewall. Check. added "Desktop Experience" role feature Tried HTTPS with Basic Authentication on port 443. Does not work. No other services are running like Sharepoint. Check. confirmed user has read/write NT level permissions for the folder/virtual dir tried net use * http://localhost /user:MYDOMAIN\me myPass get error 1920, if I don't authenticate I get error 67 confirmed I'm not applying filtering to WebDAV: <requestFiltering> <fileExtensions applyToWebDAV="false" /> <verbs applyToWebDAV="false" /> <hiddenSegments applyToWebDAV="false" /> 405 - HTTP verb used to access this page is not allowed. The page you are looking for cannot be displayed because an invalid method (HTTP verb) was used to attempt access. SHOULD I JUST GIVE UP? Other questions that helped none: 405 - ‘Method not Allowed’ adding service hosted in IIS7 webdav on iis7.5 - simply cannot make it work http://studentguru.gr/b/kingherc/archive/2009/11/21/webdav-for-iis-7-on-windows-server-2008-r2.aspx

  Read the article

• How to enable the 2 concurrent (+1 console) sessions on Windows Server 2012

  - by Dai

  I have a Windows Server 2012 VM running on Windows Azure. I want to enable the ability for 2 simultaneous administrative sessions over Remote Desktop. This is permitted under the EULA for Windows Server 2012. This is NOT the same thing as the fully-blown Terminal Services / RDS feature. In Windows Server 2000 and 2003, multiple concurrent sessions (up to a limit of 2, plus the root /console session) were enabled by default (such that logging-in via RDP without logging-out first would create a new session rather than reconnecting to the old session). In Server 2008 and later it uses single-sessions by default, as this simplifies administration (as most people want to connect to old sessions). In Windows Server 2008 R2, you can add the MMC snap-ins for Remote Desktop Host Configuration which allows you to re-enable concurrent sessions. However, in Server 2012, after adding the Remote Administration snap-ins from Server Manager it seems the Remote Desktop Host Configuration snap-in has been removed. How can I re-enable the multiple concurrent sessions for Remote Desktop for Administration in Windows Server 2012?

  Read the article

• Second ip address on same interface CentOS 6.3

  - by user16081

  I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

  Read the article

• nginx + @font-face + Firefox / IE9

  - by Philip Seyfi

  Just transferred my site from a shared hosting to Linode's VPS, and I'm also completely new to nginx, so please don't be harsh if I missed something evident ^^ I've got my WordPress site running pretty well on nginx & MaxCDN, but my @font-face fonts (served from cdn.domain.com) stopped working in IE9 and FF (@font-face failed cross-origin request. Resource access is restricted.) I've googled for hours and tried adding all of the following to my config files: location ~* ^.+\.(eot|otf|ttf|woff)$ { add_header Access-Control-Allow-Origin *; } location ^/fonts/ { add_header Access-Control-Allow-Origin *; } location / { if ($request_filename ~* ^.*?/([^/]*?)$) { set $filename $1; } if ($filename ~* ^.*?\.(eot)|(otf)|(ttf)|(woff)$){ add_header 'Access-Control-Allow-Origin' '*'; } } With all of the following combinations: add_header Access-Control-Allow-Origin *; add_header 'Access-Control-Allow-Origin' *; add_header Access-Control-Allow-Origin '*'; add_header 'Access-Control-Allow-Origin' '*'; Of course, I've restarted nginx after every change. The headers just don't get sent at all no matter what I do. I have the default Ubuntu apt-get build nginx which should include the headers module by default... How do I check what modules are installed, or what else could be causing this error?

  Read the article

• Apache 2 proxy for Tomcat 7

  - by hsnm

  Following the how-to, I wanted to make a proxy for traffic to the address /app to be processed by Tomcat 7. I added this to my httpd.conf: LoadModule proxy_module {path-to-modules}/mod_proxy.so LoadModule deflate_module modules/mod_deflate.so ProxyPass /app http://localhost:8081 ProxyPassReverse /app http://localhost:8081 I also have this on my server.xml: <Connector port="8081" enableLookups="false" acceptCount="100" connectionTimeout="20000" proxyName="localhost" proxyPort="80"/> And I have the folder /var/lib/tomcat7/webapps/app with my application files. I restarted both Tomcat 7 and Apache 2 after doing the configurations above. Problem: When navigating to my webpage.com/app, I get the error 500. I consulted apache logs, it says: [warn] proxy: No protocol handler was valid for the URL /app. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Update: This is running in ubuntu. I resolved this by adding LoadModule proxy_http_module modules/mod_proxy_http.so to my httpd.conf. Now I have another question: How can I make this proxy to work on SSL through port 443?

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

• Error 53 - The network path was not found.

  - by Jack

  I have a machine in my Active Directory Domain that I can no longer "net view" from other machines in the domain. This is a Windows XP Pro machine. It is hosting a VMWare virtual of my Domain Controller. If I attempt to net view [machine name] I get system error 53, The network path was not found. This is not a DNS issue, the same thing happens with the machine's IP. I don't think it's a firewall issue, I turned the firewall off on this machine. As I mentioned, it has worked in the past, and then stopped for no reason that I can see. I (intentionally) didn't change the software. I CAN get to the VMs hosted on this machine, can connect to their shares, net view them, etc. All other machines can see each other. In fact, the problem machine can see other machines and access their shares just fine. I tried removing the machine from the domain and re-adding it. I tried deleting the shares and recreating them. Not sure how to troubleshoot this any further. Any ideas?

  Read the article

• Ubuntu 10.04 - Add RAID 1 Array?

  - by N Rahl

  I have an existing Ubuntu 10.04 desktop system setup and running on a hard drive (Drive A). I'd like to add 2 more hard drives (Drives B & C, same size) to the system and mount them as a RAID 1 array. How do I do that? I know how to create RAID arrays during the installation, but I don't want to reinstall my system, and I shouldn't have to since my system files will stay on their own drive separate from the RAID array. I've physically added both drives to the system, and formatted them as EXT3 with gparted. Ubuntu's disk utility has a "create raid" option, but it won't let me select any of my drives (it thinks they're all full). I don't mind using mdadm, but I've found several guides that are old, and give conflicting advice. Some say I have to edit an /etc/raidtab file, some say this is done automatically. So what's the current (Ubuntu 10.04) preferred way of adding a RAID 1 to an existing system? It should turn into a raid at boot, and mount itself in /home/myname/files/. Thanks!

  Read the article

• How do I get a subdomain on Xampp Apache @ localhost?

  - by jasondavis

  **UPDATE- I got it working now, I just had to change to The port number is important here. I just modified my windows HOST file @ C:\Windows\System32\drivers\etc and added this to the end of it 127.0.0.1 images.localhost 127.0.0.1 w-w-w.friendproject-.com 127.0.0.1 friendproject.-com Then I modified my httpd-vhosts.conf file on Apache under Xampp @ C:\webserver\apache\conf\extra Under the part where it shows examples for adding virtualhost I added this code below: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /htdocs/images/ ServerName images.localhost </VirtualHost> <VirtualHost *:80> DocumentRoot /htdocs/ ServerName friendproject.com/ </VirtualHost> <VirtualHost *:80> DocumentRoot /htdocs/ ServerName w-ww-.friendproject.c-om/ </VirtualHost> Now the problem is when I go to any of the newly added domains in the browser I get this error below and even worse news is I now get this error even when going to http://localhost/ which worked fine before doing this I realize I can change everything back but I really need to at least get htt-p://im-ages.localhost to work. What do I do? Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster . Error 403 localhost 07/25/09 21:20:14 Apache/2.2.11 (Win32) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.8i PHP/5.2.9

  Read the article

• How to configure DNS server to forward queries about particular domain AND all of its subdomains

  - by user71061

  I have DNS server (linux box with bind9), which is authorative for some domains, and forward all other queries to external DNS server of my ISP provider. So far no problem. Now I want that queries about some specific domains were forwarded to my internal DNS server, f.e.: zone "some_domain" { type forward; forwarders { some_internal_dns_ip; }; }; So far still no problem, all works ok. But then, I want also to forward some reverse DNS queries to my internal DNS. So, I have added: zone "16.172.in-addr.arpa" { type forward; forwarders { some_internal_dns_ip; }; }; And this doesn't work as I expect. Queries about "16.172.in-addr.arpa" (for example 1.16.172.in-addr.arpa) are resolved correctly, but reverse queries about full address (for example 1.1.16.172.in-addr.arpa) are not. I understand that my server should use here some recursive query, but could not configure it. I have already tried adding following options recursion yes; allow-recursion { 127.0.0.1; }; allow-recursion-on { 127.0.0.1; }; but with no success . (I have used loopback address here, because I need this functionality only for my DNS host, and not for its clients) Any suggestions?

  Read the article

• How to enable synergy 24800 (or some other port) through firewalld

  - by ndasusers

  After upgrading to Fedora 18, Synergy, the keyboard sharing system was blocked by default. The culprit was firewalld, which happily ignored my previous settings made in the Fedora GUI, backed by iptables. ~]$ ps aux | grep firewall root 3222 0.0 1.2 22364 12336 ? Ss 18:17 0:00 /usr/bin/python /usr/sbin/firewalld --nofork david 3783 0.0 0.0 4788 808 pts/0 S+ 20:08 0:00 grep --color=auto firewall ~]$ Ok, so how to get around this? I did sudo killall firealld for several weeks, but that got annoying every time I rebooted. It was time to look for some clues. There were several one liners, but they did not work for me. They kept spitting out the help text. For example: ~]$ sudo firewall-cmd --zone=internal --add --port=24800/tcp [sudo] password for auser: option --add not a unique prefix Also, posts that clamied this command worked also stated it was temporary, unable to survive a reboot. I ended up adding a file to the config directory to be loaded in on boot. Would anyone be able to have a look at that and see if I missed something? Though synergy works, when I run the list command, I get no result: ~]$ sudo firewall-cmd --zone=internal --list-services ipp-client mdns dhcpv6-client ssh samba-client ~]$ sudo firewall-cmd --zone=internal --list-ports ~]$

  Read the article

• What breaks in a Windows domain if a member has a high time skew?

  - by Ryan Ries

  It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

  Read the article

• SPF record for Gmail?

  - by Chris

  I have DNS, with a SPF TXT record, configured for a domain name. The primary user of the domain name now needs to be able to send both from our SMTP servers, and also from her GMail account. I've seen all the information about adding "include:_spf.google.com" to the SPF TXT record, but, as I look into it, it appears that record is outdated. In particular, I had the user send me a test message, and note that it was: Received: from mail-la0-f50.google.com (mail-la0-f50.google.com [209.85.215.50]) However, _spf.google.com doesn't list that IP address: $ dig +short _spf.google.com txt "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ip4:173.194.0.0/16 ?all" (Note that a 209.85.21*8*.0 network is listed, but not 209.85.21*5*.0.) Is there a better way to enable sending from GMail? This user sends to at least one recipient with a strict SPF policy that bounces mail not from a designated host... Many thanks!

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >