Search Results

Search found 104068 results on 4163 pages for 'sql server 2008 express'.

Page 321/4163 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

  • Why would Windows Task Scheduler spawn multiple instances of the same task that run into each other?

    - by swagner88
    Overview: I use Windows Task Scheduler to run automated tasks. Occasionally I will see that randomly a task has failed to perform its duties. When I check Task Scheduler to see what has occurred in the history log, I see that for some reason, when the tasks are triggered at their schedules, they are spawning several instances of themselves simultaneously which turns into a train wreck for the task and it either kills the other instances and tries to run the "first" one, or it just does not run at all as it believes another instance of itself is already running. Sometimes this occurs in the same tasks and then occasionally it happens with others. The fix is just to end all instances and start the task manually. Question: Why would one single task with one single schedule decide to spawn multiple instance of itself simultaneously? Note: I've got a separate user account set to run the tasks instead of myself. That user is indeed an admin on the machine that runs the tasks and the tasks are set to tun whether or not the user is logged on. Also, the machine is windows server 08 R2.

    Read the article

  • Should be simple: existing laptop with local user and outlook 2007 migrate on same computer to domain user with outlook 2007 emails intact

    - by bifpowell
    I have Dell Laptop with windows 7 64 bit and for the last year it's been just a machine with an account like: machine\john there are files in folders and stuff in c:\users\john and john uses outlook 2007 as a pop3 client and has identifiable local appdata pst files. Now I installed a server and want to have everything be domain-centric so I added this laptop to the domain with admin credentials and then logged in as a domain user as: domain\john.smith Now I want to duplicate machine\john (outlook emails mostly) to domain\john.smith. In the past I used the Files and Settings Xfer Wizard and done. I tried that here and it crunched away for a while, made the file, but the restore had no effect - it ran for a while, had a progress bar, but it's like nothing happened at all afterwards. I've rebooted the machine, logged in as domain administrator as the first user to log on after the restart and tried: c:\users\john xcopy c:\users\john c:\users\john.smith /V /C /F /H /K /Y /E ...and it copies some of it, but when it gets to c:\users\john.smith\appdata\local\application data it chokes "Access denied, unable to create directory" I also tried logging in as domain\john.smith and copying the entire directory that the PSTs are in from machine\john and a lot of the mail was there when I launched outlook after replacing the PSTs, but not all of them??? I got errors about files in use when doing this method, which I figure must be why not all the old emails are in the inbox?... There must be some extremely simple way to do what must be a very common requirement. Any guidance appreciated.

    Read the article

  • php_ibm_db2.dll on IIS 7.5 using PHP 5.3 error message

    - by grmbl
    I'm trying to use ibm_db2 extension to access iSeries DB2 database. This is the testcode (taken from here) <?php $database = 'ALI452BFAL'; //library $user = 'STN452'; $password = '**********'; $hostname = 'myserverip'; $port = 50000; $conn_string = "DRIVER={IBM DB2 ODBC DRIVER};DATABASE=$database;" . "HOSTNAME=$hostname;PORT=$port;PROTOCOL=TCPIP;UID=$user;PWD=$password;"; $conn = db2_connect($conn_string, '', ''); if ($conn) { print "ok"; db2_close($conn); } else { echo db2_conn_error() . '<br>' . db2_conn_errormsg(); } ?> I have installed a very basic package containing the db2 driver and added this as an extension. (IBM Data Server Driver for ODBC, CLI, and .NET.msi) This is my result: 08001 [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected: "10.10.0.120". Communication function detecting the error: "connect". Protocol specific error code(s): "10061", "", "". SQLSTATE=08001 SQLCODE=-30081 Anybody tried this before??

    Read the article

  • Hyper-V Virtual Machine won't respond over network

    - by Brad Gignac
    Recently, one of our Hyper-V virtual machines has periodically stopped responding over the network. It seems to be happening every few days, and it occasionally happens up to several times a day. I am by no means a sysadmin, so any direction you guys could provide would be very welcome. I've included everything I know to include below. If you need any additional information, I'll be glad to include it. I can connect through the Hyper-V console. I can't connect to network shares, IIS web apps, using RDP, or using ping. Memory usage seems to be normal (3 of 4 GB) Processor usage seems low. We don't know the exact time the server goes down, but the following error appears consistently around the time it goes down: Error 5719, NETLOGON This computer was not able to set up as secure session with a domain controller in domain *** due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If this problem persists, please contact your domain administrator.

    Read the article

  • Defrag starting when not scheduled. What is triggering the defrag

    - by leroyclark
    I have a fileserver that is starting a defrag around 2:00 PM everyday. This is killing performance as it runs for ours becuase this is a file server and has multiple drives. All scheduled tasks regarding defrag have been disabled. I have verified that it is accessing the data drives(using SysInternals tools). The reason I might have though otherwise was the event log has multiple entries regarding defragging a db file related to shadow copies. Oh yes these drives take shadow copy snapshots multiple times per day but the times of them don't coincide with the defrag task. There is nothing in the event logs regarding defrag except those noted above in relation to shadow copies. I'm out of ideas looking for what is starting these jobs. One possiblility is that the drives are not being defgramented, but being analyized to determine if they need to be defragmented. I manually ran an analysis and the cpu usage(by dfrgntfs.exe) seems to be similar to what I'm seeing everday while the defrag process is running. However I've found no setting that schedules this analysis.

    Read the article

  • Access Denied on Some Subfolders/Files Within a Share

    - by Tim
    First thing this morning, I find that users on one of our share drives are all getting "access denied". I tried the same drive and also received "access denied" as a Domain Admin. Previous to this, all specified users and admins could get access. I checked share permissions I checked NTFS permissions I temporarily made both types of permissions read/write to "Everyone" -- This worked for one user It turns out that this is occurring for only some files/folders. When I try to manually alter the share of that single share, it can't be shared, access denied. xcacls also gets access denied rebooted the server (not a big deal - this is a smallish company). Does anybody have any insight, my google-fu is coming up blank. Thanks. EDIT: More info, I just ran AccessEnum. There were a lot of "access denied", but I noticed the pattern that all of the access denied had a parent with an owner of "???". When I look at the properties, the "Unable to display owner" message is in the box and I can only make my user account the owner. I can then share the individual file/folder, but it doesn't seem to propogate down to subfolders/files.

    Read the article

  • ADFS Relying Party

    - by user49607
    I'm trying to set up an Active Directory Federation Service Relying Party and I get the following error. I've tried modifying the page to allow <pages validateRequest="false"> to web.config and it doesn't make a difference. Can someone help me out? Server Error in '/test' Application. A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. To allow pages to override application request validation settings, set the requestValidationMode attribute in the httpRuntime configuration section to requestValidationMode="2.0". Example: <httpRuntime requestValidationMode="2.0" />. After setting this value, you can then disable request validation by setting validateRequest="false" in the Page directive or in the <pages> configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case. For more information, see http://go.microsoft.com/fwlink/?LinkId=153133. Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [HttpRequestValidationException (0x80004005): A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo...").] System.Web.HttpRequest.ValidateString(String value, String collectionKey, RequestValidationSource requestCollection) +11309476 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, RequestValidationSource requestCollection) +82 System.Web.HttpRequest.get_Form() +186 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.IsSignInResponse(HttpRequest request) +26 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.CanReadSignInResponse(HttpRequest request, Boolean onPage) +145 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs args) +108 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +266 `

    Read the article

  • Folder redirection GPO doesn't seem to be working

    - by homli322
    I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

    Read the article

  • SQL Server becomes slow after restart

    - by Tobi DM
    I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

    Read the article

  • outlook security alert after adding a second wireless access point to the network

    - by Mark
    Just added a Netgear WG103 Wireless Access Point in our conference room to allow visitors to access the internet through out internal network. When switched on visitors can connect to the intenet and everything works fine. Except, when the Access Point is switched on, normal users of the network get a Security Alert when they try to start Outlook 2007. The Security Alert is the same as the one shown in question 148526 asked by desiny back in June 2010 (http://serverfault.com/questions/148526/outlook-security-alert-following-exchange-2007-upgrade-to-sp2) rather than "autodiscover.ad.unc.edu" my security alert references our "Remote.server.org.uk". If I view the certificate it relates to "Netgear HTTPS:....", but the only Netgear equipment we have is the new Access Point installed in the conference room. If the Access Point is not switched on we do not get the Security Alert. At first I thought it was because we had selected "WPA-PSK & WPA2-PSK" Network Authentication Type but it continues to occur even if we opt for "Shared Key" WEP Data Encryption. I do not understand why adding a Netgear Wireless Access point would cause Outlook to issue a Security Alert when users try to read their email. Does anyone know what I have to do to get rid of the Security Alert? Thanks in advance for reading this and helping me out.

    Read the article

  • Folder redirection GPO doesn't seem to be working

    - by user57999
    I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

    Read the article

  • How do you apply proxy settings per computer instead of per user?

    - by Oliver Salzburg
    So far, I've used a user group policy object utilizing Internet Explorer maintenance to set a proxy for the user in IE. We have now deployed the Enterprise Client (EC) starter group policy to our domain and this policy affects this behavior. The EC group policy uses the policy Make proxy settings per-machine (rather than per-user). This policy describes itself as: This policy is intended to ensure that proxy settings apply uniformly to the same computer and do not vary from user to user. Great! This seems to be an improvement over my previous setup. If you enable this policy, users cannot set user-specific proxy settings. They must use the zones created for all users of the computer. What zones and where do I configure the proxy settings for them? I assumed the policy would simply take the user settings and apply them, but that's not what's happening. Now no proxy server is set at all. So my previous settings obviously no longer have any effect. So far, I've only come up with solutions that involved direct manipulation of the Windows registry. Which is fine, I guess, but the way the proxy is configured for users makes it appear as if there could be a higher level approach.

    Read the article

  • Users getting 'flooded' with not read notifications (NRNs) for old emails and meeting requests

    - by Exile
    I'm being placed under quite a lot of pressure from senior management over a relatively trivial issue. Basically the vast majority of users are complaining that they receive not read notifications (NRNs) for old emails and meeting requests in large numbers multiple times a day. I know something strange is happening because some are delivered at silly times in the morning (i.e 3AM or 4AM). The problem I have is that these some of these NRNs are from meeting requests and messages that are 120 days old, so some users have deleted the original message so I don’t actually know if the NRN is from an email or meeting request. This is typical of what users receive as a NRN: From: Sender Sent: 23 March 2012 04:16 To: Recepient Subject: Not read: Accepted: Status update Your message To: Sender Subject: Accepted: Status update Sent: Wednesday, November 23, 2011 8:59:00 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Friday, March 23, 2012 4:15:32 AM (UTC) Dublin, Edinburgh, Lisbon, London. ... From: Sender Sent: 18 March 2012 01:13 To: Recepient Subject: Not read: Gold delivery - Sourcing module Your message To: Sender Subject: Gold delivery - Sourcing module Sent: Friday, November 18, 2011 9:37:58 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Sunday, March 18, 2012 1:12:37 AM (UTC) Dublin, Edinburgh, Lisbon, London. I have done a search and found the following: http://support.microsoft.com/kb/2544246 http://support.microsoft.com/kb/2471964 But we already installed 'Update Rollup 6 for Exchange Server 2010 Service Pack 1' back in December, so I am not sure what we can do to fix this?

    Read the article

  • Attempted hack on VPS, how to protect in future, what were they trying to do?

    - by Moin Zaman
    UPDATE: They're still here. Help me stop or trap them! Hi SF'ers, I've just had someone hack one of my clients sites. They managed to get to change a file so that the checkout page on the site writes payment information to a text file. Fortunately or unfortunately they stuffed up, the had a typo in the code, which broke the site so I came to know about it straight away. I have some inkling as to how they managed to do this: My website CMS has a File upload area where you can upload images and files to be used within the website. The uploads are limited to 2 folders. I found two suspicious files in these folders and on examining the contents it looks like these files allow the hacker to view the server's filesystem and upload their own files, modify files and even change registry keys?! I've deleted some files, and changed passwords and am in the process of trying to secure the CMS and limit file uploads by extensions. Anything else you guys can suggest I do to try and find out more details about how they got in and what else I can do to prevent this in future?

    Read the article

  • powershell vs GPO for installation, configuration, maintenance

    - by user52874
    My question is about using powershell scripts to install, configure, update and maintain Windows 7 Pro/Ent workstations in a 2008R2 domain, versus using GPO/ADMX/msi. Here's the situation: Because of a comedy of cumulative corporate bumpfuggery we suddenly found ourselves having to design, configure and deploy a full Windows Server 2008R2 and Windows 7 Pro/Enterprise on very short notice and delivery schedule. Of course, I'm not a windows expert by any means, and we're so understaffed that our buzzword bingo includes 'automate' and 'one-button' and 'it needs to Just Work'. (FWIW, I started with DEC, then on to solaris and cisco, then linux of various flavors with a smattering of BSD nowadays. I use Windows for email and to fill out forms). So we decided to bring in a contractor to do this for us. and they met the deadline. The system is up and mostly usable, and this is good. We would not have been able to do this. But it's the 'mostly' part that is proving to be the PIMA now, and I'm having to learn Microsoft stuff anyway until/if we can get a new contract with these guys for ongoing operations. Here's my question. The contractor used powershell almost exclusively for deployment, configuration and updating. My intensive reading over the last week leads me to think that the generally accepted practices for deployment, configuration and updating microsoft stuff uses elements of GPOs and ADMX templates, along with maybe some third party stuff like PolicyPak. Are there solid reasons that I've not found yet that powershell scripts would be preferred over the GPO methods? I'm going to discuss this with the contractor lead when he gets back from his vacation, and he'll be straight with me (nor do I think they set us up). But I can also see this might be a religious issue, so I would still like some background on this. Thoughts? or weblinks? Thanks!

    Read the article

  • File corruption (bad checksums) in large files copied to VMware guest

    - by AllanA
    In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

    Read the article

  • Why use Oracle Application Express for web app?

    - by Jack
    Hi all. I believe we're moving to Oracle Apex for future development. I've read about Oracle Apex on wikipedia and it's pro and con. It seem to me the con outweigh the pro but maybe I'm wrong. I get the sense that Oracle Apex is for DBA with little or no programing knowledge to setup a web app quickly sort like MS Access for none programmer. If you have Oracle Apex working experience, can you share your though? From wikipedia's entry, it doesn't seem like you need to know any programming language at all but just the PL/SQL? edit: Is Oracle Apex scalable? Can it handle traffic like Facebook's size? Thank. Jack

    Read the article

  • I cannot connect to SQL Server Express using VB.NET

    - by konin
    Can someone tell me what I am missing? I am using this connection string to connect to my database and still it won't connect: Dim str As String = "Provider = .NET Framework Data Provider for SQL Server; Data Source=C:\Users\konin\Documents\UHMS\bin\Debug\UHMS.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True" This is the process I used to get the data source: right-click the database select properties and click select data source I hope I am clear enough. Thanks for reading. Edit: Error Message is as follows: unable to connect to database please contact administrator

    Read the article

  • COM+ Connection Pooling Doesn't Appear to be working on SQL Server 2005 Cluster

    - by kmacmahon
    We have a COM+ Data Layer that utilized Connection Pooling. Its deployed to 3 clusters, 2 SQL Server 2000 and 1 SQL Server 2005 environment. We noticed today that our monitoring software is reporting Thousands of Logins per minute on the SQL Server 2005 box. I did some tracing in both environments and profiler is reporting this for the 2000 boxes: sp_reset_connection SQL CALL sp_reset_connection SQL CALL sp_reset_connection SQL CALL and this for the 2005 box: Audit Logout sp_reset_connection Audit Login SQL CALL Audit Logout sp_reset_connection Audit Login SQL CALL Audit Logout sp_reset_connection Audit Login SQL CALL Is there some sort configuration for SQL Server 2005 different from SQL Server 2000 that we might be missing that would be creating this issue?

    Read the article

  • Is it possible to password protect an SQL server database even from administrators of the server ?

    - by imanabidi
    I want to install an application (ASP.Net + SQL server 2005 express) in local network of some small company for demo but I also want nobody even sysadmin see anything direct from the database and any permission wants a secure pass . I need to spend more time on this article Database Encryption in SQL Server 2008 Enterprise Edition that i found from this answer is-it-possible-to-password-protect-an-sql-server-database but 1.I like to be sure and more clear on this because the other answer in this page says : Yes. you can protect it from everyone except the administrators of the server. 2.if this is possible, the db have to be enterprise edition ? 3.is there any other possible solutions and workaround for this? thanks in advance

    Read the article

  • Facing problem in configuring Reporting Server

    - by idrees99
    Hi all, I am using Sql server 2005 express edition and i want to Install and configure Reporting server on my local machine.Now i have installed the reporting server but the issue is that i am unable to configure it properly.when ever i go to start the reporting services it gives me the following message: THE SQL SERVER REPORTING SERVICE(SQLEXPRESS)service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts service. I am using WindowsXp Professional. plz help me out as i have just started using sql server and i dont have any idea.

    Read the article

  • Untrusted file not showing unblock button windows 7

    - by Stewart Griffin
    I downloaded a dll but cannot use it as it is considered untrusted. I opened it using: Notepad.exe filepath\filename:zone.identifier and it informed me that that the file was in zone 3. Despite this I do not get an unblock button in the properties page for the file. Not being able to unblock it with this button I instead changed the value in notepad and saved my changes. When I reopen the zone.identifier info it is as I left it. I have set it to both 2 (trusted) and 0 (no information), but still am unable to use the files. Any one have any ideas? If I cannot unblock the files I will investigate turning this blocking off, but as a first step I'd like to try and just unblock this one file. Note: using Windows 7 Ultimate edition. It is when using MSTest from within Visual Studio 2008 that I hit problems.

    Read the article

  • Shared Excel WorkBook is locked by another user

    - by Simone
    I’ve been trying everything; this is the last chance I have. I moved folders and files from an old Windows Server 2003 File Server to a new FS (Win Server 2008 R2) with DFS and ABE enabled. Now, a specific Shared Excel file is driving me crazy, out of a sudden, lots of times per day, users are getting the following error while opening that file: Filename.xlsx is locked for editing by ‘another user’. Open ‘Read-Only’ or, click ‘Notify’ to open.. I’ve already followed this, with no joy: http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx In any case, I strongly think this is not client-related, since it never gave that problem in the past with Windows Server 2003. I’ve found and followed many other solutions, nothing. The users are all utilizing Office 2010 on Windows 7 machines, besides a few users who are still on Windows XP machines. I appreciate any help, thank you!

    Read the article

  • vSphere Client vCenter Template Customization Specification Using Windows Sysprep Unattended Answer XML File

    - by Brian
    I'm trying to setup a vSphere Client vCenter v5.0.0 Build 455964 Template Customization Specification using a Windows Sysprep unattended answer XML file for Win2008R2. However I didn't know how Sysprep worked before attempting this so it was a time-consuming nightmare (even after reviewing VMware vSphere ESXi 5's documentation)! I think I've figure out what I'm supposed to be doing, but it's still not working. The biggest problem at this point is that vSphere Client vCenter Customization Specification IP address information is not sticking when I load a Sysprep XML file with just 1 basic setting! This can only be a bug. Here is the process I'm using: PROCESS for Windows - vSphere Client Install Windows OS install VM Tools customize Windows (GPOs can be used to do this after deployment) install Applications (GPOs can be used to do this after deployment too) shutdown the VM convert the VM to a template create a custom Windows Sysprep XML answer file with desired customizations View Management Customization Specifications Manager create "New" Specification for "Target Virtual Machine OS" select Windows check "Use Custom Sysprep Answer File" (ADDS: Custom Sysprep File. KEEPS: Network (IP), Operating System Options (SID, Sysprep /generalize). REPLACES: Registration Information of Owner Name & Organization, Computer Name, Windows License (Key), Administrator Password, Time Zone, Run Once, Workgroup or Domain) name it as "VMwareCS-OS####R#x32/64w/Sysprep-TEST" (CS=Customization Specification) set Description as "Created YYYY/MM/DD by FLast" NEXT import a Sysprep answer file from secure location NEXT Custom settings NEXT click "..." box to right of "Use DHCP" set "Use the following IP settings:" for "IP Address" fill out the first 2 octets set appropriate values for other 2-3 fields set DNS server addresses OK NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish View Inventory VMs and Templates right-click previously completed template Deploy Virtual Machine from this Template provide the new OS name (max15char) select inventory location NEXT select Host/Cluster (wait for validation to succeed) NEXT select Resource Pool (wait for validation to succeed) NEXT select Storage location NEXT check "Power on this virtual machine after creation" select "Customize using an existing customization specification" select desired specification select "Use the Customization Wizard to temporarily adjust the specification before deployment" NEXT NEXT Custom settings? NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish Finish. I know a community member named "brian" (http://serverfault.com/users/25904/brian) has worked with this scenario before, but I couldn't figure out how to contact him directly, so Brian if you see this message could you provide some information to help? Thanks, Brian

    Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >