Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 322/431 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Windows 7 Blank Screen on Boot / Login

  - by Greg

  I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  Hi, I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by Neil Katin

  We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• Move an existing RAID 5 array from Ubuntu to Gentoo

  - by Cocoabean

  I have a 64-bit Ubuntu machine with a 4-disk RAID 5 using software raid (md). I've been able to boot an Ubuntu LiveCD and recognize the array with a simple mdadm -A /dev/md0. It was easy to mount after that and nothing had to rebuild. I'm installing Gentoo on this box now (multi-boot, non-RAID root partition) and I have md auto-detect turned on in the kernel. When I boot Gentoo I get: "invalid superblock magic on sdd" for each of the drives in the array. I boot back to Ubuntu and they mount no problem. I tried copying the mdadm.conf that works in Ubuntu to Gentoo, and then ran mdadm -A /dev/md0 but it reports that there is no array named md0. I don't want to lose data (obviously) and I don't want to have to let the RAID rebuild every time I switch between OSes. Any help is appreciated. Both are using mdadm 3.1.4 Both are running 64-bit kernels. mdadm -D /dev/md0 from Ubuntu yields: http://pastebin.com/5gj2QNkV UPDATE: After rebooting I noticed that it still complains about invalid blocks, but cat /proc/mdstat shows an inactive /dev/md127 with the same disks as my raid. I want to mount it but I don't want to get stuck waiting for a rebuild or destroying it inadvertently. mdadm -D /dev/md127 Here is pastebin of mdadm -D /dev/md127 on gentoo: http://pastebin.com/gDCWn0Rn UPDATE II: dmesg output about 'invalid raid superblocks' http://paste.ubuntu.com/885471/ fdisk -l from Ubuntu, /dev/md0 does not have any partitions but I do have it mounted and accessible: http://paste.ubuntu.com/885475/

  Read the article

• IP address from a MAC address

  - by acermate433s

  I'm writing a class to integrate a POS card reader device to our software. In order for it to work I must know what IP it's using. We were given some sample code by the service provider and the way they do this is they open a website (http://www.ebizchargeemv.com/getip.php?mac={MAC address of device}) and it would return the IP address of the device. The device I'm using is a POSLynx220 Mini. It has an ethernet port that connects to the internet to communicate with the service provider. I send TCP data to it and the device then controls a PIN pad that prompts a client to swipe his card. It's probably a mini computer that communicates with the service provider and uses the PIN pad as its input device. Just being curious but how did they implement this? Are they implementing it using ARP? I'm planning on not using their website to determine the IP of the device. I've seen some code that uses ARP but using executing ARP in one of the PC didn't detect the POS device.

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• Cannot start MySQL

  - by Mohamed Nour El-Din

  I used this command from shell to repair all Databases mysqlcheck -u root -p --auto-repair --check --optimize --all-databases and after that I restarted the server when it came back alive again I tried to open my vBulletin forum but I recived Database error message. and also tried to open phpMyAdmin but I received this error : #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured). I checked the services list and found that the MySQL Service is not listed, so I tried to start it from shell I receive this error : Starting MySQL.Manager of pid-file quit without updating fi[FAILED] could anyone help me in that ? thanks in advance. update I found these lines in the log file 101101 01:36:01 mysqld started 101101 1:36:01 [Warning] Asked for 196608 thread stack, but got 126976 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] Fatal error: Can't open and lock privilege tables: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 01:36:01 mysqld ended What should I do then ?

  Read the article

• System32 files can be deleted in Windows 2008 but not in Windows 2003 [closed]

  - by Harvey Kwok

  I have been using Windows 2003 for a long time. There is a wonderful feature. I don't know the name of it but the feature is like this. You can rename or delete some important files inside C:\windows\system32. e.g. kerberos.dll. After a while, the deleted files will be automatically recovered. I think this is because those files are criticl enough that Windows cannot survive without them. However, in Windows 2008, this feature is gone. Instead, all the files in System32 are owned by TrustedInstaller. However, as a administrator, I can still take the ownserhip of the files and then delete them. Windwos 2008 won't recover the deleted files and hence the system is screwed next time it's reboot. So, I wonder why Windows 2008 dropping that wonderful feature. Was that auto-recovery feature also suffer from some issues? Does Windows 2008 have some other features that can prevent this type of disaster from happening?

  Read the article

• Outlook 2007, how to stop replies from being sent if they meet criteria

  - by CChriss

  I have my college's email account auto-forwarded (they don't offer pop3 or imap) to my main gmail account so I don't have to go to their website to check for mail. That gmail account, and others, use pop3 down to my Outlook 2007. In my Outlook, I have a rule that puts mail sent to my @college address into a folder named Collegemail. Since the college email system lacks pop3 or imap, I have to go to their site to send a reply, so that the reply will be sent from my @college email address. The problem is that I cannot seem to get into the habit of going to my college's website to reply to those emails, so quite often I reply to them while in Outlook, which means my replies are sent "from" my main gmail address. How can I set up Outlook to either 1) disable replying to emails in the Collegemail folder or to emails where my college email address is in the original To: line, or else 2) set it to send those replies from a non-functional dummy account. The dummy account would be unable to send the email so the email would be stuck in the Outbox. (I already have the non-functional dummy account set up as Outlook's "Default" account. When I compose a new mail I have to deliberately pick one of my good accounts to send the new mail with, or else Outlook uses the default dummy account and the email stays in the Outbox with a Send error.) Thanks. Update: Anybody? Please help.

  Read the article

• Selective Pointer device remapping in linux

  - by user6368

  I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• VPN from Windows XP to OpenSwan: correct setup?

  - by Gnudiff

  Main question is what I am doing wrong in my OpenSwan or L2TP client setup? I am trying to create a Linux OpenSwan VPN connection from Windows XP machine, using preshared key and the builtin Windows XP L2TP IPsec option. I have followed the instructions in Linux Home networking Wiki for setting up OpenSwan and a guide to making it work with the Windows XP client, but am now stuck. The net setup is as follows: [my windows client, private IP A]<->[f/wall B]<-internet->[g/w X]<->[Linux OpenSwan server Y] A - private subnet /24 B - internet address X - internet address /24 Y - internet address on same subnet as X What I essentially want is for computer with A address to feel and work, as if it was in X subnet for purposes of outgoing and incoming TCP and UDP connections. My OpenSwan setup is as follows: /etc/ipsec.conf (AAA and YYY indicates ip address parts of A and Y addresses): conn net-to-net authby=secret left=B leftsubnet=AAA.AAA.AAA.0/24 leftnexthop=%defaultroute right=Y rightsubnet=YYY.YYY.YYY.0/24 rightnexthop=B auto=start the secret in /etc/ipsec.secrets is listed as: B Y : PSK "0xMysecretkey" where B & Y stand for respective IP adresses of gateway B and linux server Y My L2TP WinXP setup is: IP of destination: Y don't prompt for username security options: typical, require secured pass, don't require data encryption, IPSec PSK set to 0xMysecretkey networking options: VPN Type: L2TP IPSec VPN; TCPIP protocol (with automatic IP address assignment) and QOS packet schedulers enabled The error I get from Windows client is 789: "error during initial negotiation"

  Read the article

• Router to WIFI Client to Router (New solution for distance when repeater doesnt help)

  - by Kangarooo

  Ethernet to TL-WR340G with WIFI enabled Using TL-WA500 tried repeater mode which was not good enough and had password problems (could not connect if using either ASCII or Normal password in one way then in repeater worked other way) and also could not forward (repeat) WPA/WPA2 security. So since this repeater can also be as client, I made it as client and used another router (TL-WR740N) to get from wire connection from that client and all was working for a little bit. Every machine is set up to be auto DHCP. 1st when setting up client mode I found it working after doing reset. Then after some tens of minutes internet stopped working. When I removed WiFi client then all went back to normal. Where is the problem and how to make this work? Ethernet- TL-WR340G(AutoDHCP) ==> wifi ==> TL-WA500 TL-WA500 wifi client mode(AutoDHCP) ==> wire ==> TL-WR740N TL-WR740N router mode (AutoDHCP) ==> My Computer In other words: TL-WR340G ) ) ) ) TL-WA500 ===== TL-WR740N ==== PC1 ) ) WiFi === Wire

  Read the article

• [URGENT HELP PLEASE]USB Flash Drive Problem!

  - by Daren

  Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

  Read the article

• How can I fix my vista PCs screen resolution and refresh rate

  - by Antony Scott

  I have a media PC running media portal hooked up to my HDTV via HDMI. The TV is a couple of years old now, so only supports 1080i, which is 1920x1080@25Hz. I've got it connected to my PC via a HDMI compatible AV receiver. If I power up the amp (wait for it to boot fully) followed by the TV| and finally the PC, all is well and I get a picture. If I deviate from that sequence, or don't wait for the amp to book up fully, or even switch the amp to another video input (for example, my PS3). The PC sees this and defaults the screen resolution/refresh rate to 1920x1080@60Hz. So, I end up with a blank screen. To fix this I have to use UltraVNC from a PC and change the refresh rate back to 25Hz. So, is there a way to turn off that auto detection, or to manually define what resolution/refresh rates the monitor can do. I'm using the on-board Radeon 3200 video and do not have any of the AMD software installed as it seems to cause problems with video playback. So, I'm looking for a native vista fix, or possible some 3rd party software.

  Read the article

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• Do registry issues with Win7 persist through a recovery from a system image?

  - by user59089

  So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

  Read the article

• Cannot connect to postgres installed on Ubuntu

  - by Assaf

  I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

  Read the article

• Bootable GRUB partition

  - by MA1

  I have a customized live fedora 12 USB which is working fine. What i want to do is to make a partition of my hard disk bootable so that my customized fedora can be run from hard disk. To accomplish this i did the following steps: Created a primary partition(/dev/sda2) and format it as ext3 and set it as active. Copy all the files in the live usb to /dev/sda2. Following are the live usb contents(all directories): a. boot b. EFI c. LiveOS d. syslinux Then i installed the GRUB in boot/grub Created the grub.conf in boot/grub Following are the contents of each directory in the USB: syslinux/ boot.cat isolinux.bin splash.jpg vesamenu.c32 initrd0.img ldlinux.sys syslinux.cfg vmlinuz0 LiveOS/ livecd-iso-to-disk osmin.img squashfs.img EFI/ boot/ boot.conf grub.conf boot.efi bootia32.conf bootia32.efi splash.jpg splash.xpm.gz vesamenu.c32 initrd0.img isolinux.bin isolinux.cfg vmlinuz0 boot/grub/ core GRUB files grub.conf olpc.fth Following are contents of grub.conf default=0 splashimage=/EFI/boot/splash.xpm.gz timeout 2 hiddenmenu title funLinux kernel /EFI/boot/vmlinuz0 root=live:LABEL=myFun rootfstype=auto ro liveimg quiet ssb.blacklist=1 selinux=0 vga=normal nomodeset rhgb initrd /EFI/boot/initrd0.img Now when i try to boot from the hard disk it shows the grub menu and fedora starting to load but during loading it said No root device found Boot has failed, sleeping forever So, where is the problem? what i am doing wrong?

  Read the article

• Installing/enabling PHP Pecl Intl extension on CentOs 5

  - by Marijn Huizendveld

  Original question: I'm having trouble installing the PHP Pecl Intl extension on my CentOs 5 machine. After installing both icu and libicu with the following commands: $ yum install icu $ yum install libicu I tried to install the Intl extension like so: $ /usr/bin/pecl install intl I selected to search for the default location for the ICU libraries and header files. It ends up crashing like this: checking whether to enable internationalization support... yes, shared checking for icu-config... no checking for location of ICU headers and libraries... not found configure: error: Unable to detect ICU prefix or no failed. Please verify ICU install prefix and make sure icu-config works. ERROR: `/tmp/pear/temp/intl/configure --with-icu-dir=DEFAULT' failed update After successfully installing the development version of icu as suggested by RusAlex (thanks RusAlex) like so: $ yum install libicu-devel I ran into a new problem which I also encountered locally the following command: $ /usr/bin/pecl install intl now produces this error: /private/tmp/pear/temp/intl/collator/collator_class.c:92: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:96: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:101: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:107: error: duplicate 'static' make: *** [collator/collator_class.lo] Error 1 ERROR: `make' failed It appears to have something to do with PHP 5.3 being bundled with Intl already. But how can I enable this extension, if I look in my PHP Info than I cannot find any reference to it...

  Read the article

• Windows 7 libraries nightmare

  - by Lobuno

  In our active directory we deploy a policy to our clients where the personal directory (My documents) is redirected to a file server of ours \server\share\username\Documents In older systems everything worked fine. in Windows 7 some users are experimenting the following symptoms: The Documents library is EMPTY Where the documents library should be shown in Explorer an empty white icon is displayed. No caption. Right clicking in the Documents library to edit the folders that are part of the libraries brings the dialog up. However, that dialog is unusable. No folder is present there and clicking Add folder does nothing. Deleting the library and auto-creating it doesn't solve the problem The shared directory can be accessed via UNC paths and it can be mounted as a shared drive as well. The library is still broken. The shared drives are on a W2008 indexed server... Using the Windows Library tool utility doesn't solve the problem. What can the cause of this problem be and how can this be solved?

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >