Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 319/431 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • Wifi network undetectable on a Lenovo G470

    - by Rex
    I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

    Read the article

  • Windows 2003 DNS or IIS6 Problem?

    - by Mario
    Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

    Read the article

  • .com domain transfer failing

    - by digital
    Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

    Read the article

  • Editing a windows XP installation's registry without being able to log in.

    - by Alain
    I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

    Read the article

  • BitLocker with Windows DPAPI Encryption Key Management

    - by bigmac
    We have a need to enforce resting encryption on an iSCSI LUN that is accessible from within a Hyper-V virtual machine. We have implementing a working solution using BitLocker, using Windows Server 2012 on a Hyper-V Virtual Server which has iSCSI access to a LUN on our SAN. We were able to successfully do this by using the "floppy disk key storage" hack as defined in THIS POST. However, this method seems "hokey" to me. In my continued research, I found out that the Amazon Corporate IT team published a WHITEPAPER that outlined exactly what I was looking for in a more elegant solution, without the "floppy disk hack". On page 7 of this white paper, they state that they implemented Windows DPAPI Encryption Key Management to securely manage their BitLocker keys. This is exactly what I am looking to do, but they stated that they had to write a script to do this, yet they don't provide the script or even any pointers on how to create one. Does anyone have details on how to create a "script in conjunction with a service and a key-store file protected by the server’s machine account DPAPI key" (as they state in the whitepaper) to manage and auto-unlock BitLocker volumes? Any advice is appreciated.

    Read the article

  • Selenium server causes crazy load on server - how to prevent?

    - by Eric
    I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

    Read the article

  • Mounting NAS drive with cifs using credentials file through fstab does not work

    - by mahatmanich
    I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here. EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

    Read the article

  • Lion server profile manager, device enrollment doesn't work

    - by user964406
    I am in the process of setting up Lion Servers profile manager to manage iPads on our local school network. I don't need to manage them while they are outside the network. I have successfully had it working on my personal network. The school network is behind a proxy which we have no control over. I can get the iPads to view the mydevices page and install a trust cert. I have managed to get an iPad to successfully install the remote management profile. After this the profile manager bugs out. It will list the active task of 'new device (sending)' but it's unable to complete the task. If I click on the device on profile manager and try any of the actions out they will all fail to complete. I am using the auto generated certificates and this works if I bring the server and iPad outside of the school network. Shortly after device enrollment the system log on the Lion server reports the following Replaced the actual ip address with INTERNALIP Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini applepushserviced[778]: Got connection error Error Domain=NSPOSIXErrorDomain Code=1 "The operation couldn\u2019t be completed. Operation not permitted" UserInfo=0x7fa483b1a340 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS} Jun 4 08:40:53 mini applepushserviced[778]: Failed to get client cert on attempt 2, will retry in 15 seconds Does anyone have any ideas on how to get past this stage? Thanks in advance.

    Read the article

  • OCZ Vertex 3 SSD boot failure

    - by Col Zero
    Ok, so I just purchased and received a 120GB OCZ Vertex 3. I had Windows 7 on an .ISO file on my computer. I formatted a USB stick and configured it to be read as a CD so that I could install windows onto my SSD from it. I started my comp, had the boot priority set to my USB, starting installing windows 7 to my SSD. And out of no where (I wasn't watching) my computer restarted and it brought me back to the beginning of the Windows 7 set-up. So I turned my computer off and booted it up from the SSD to see if it had installed onto the SSD. The first 2 attempts I had a disk boot failure. So I plugged my hard drive back in, started my computer, turned it off, plugged the SSD back in (literally) and it booted up fine/ Finalized windows got internet set up, and Windows had updates that required a restart. So I restarted and had another disk boot failure. Now I have a disk boot failure every time I try to start my computer up through my SSD. Extra Info: My SSD has never been able to be detected in my BIOS unless my Hard Drive was unplugged (eve then my BIOS didn't always detect it). MY SSD wasn't detected in my BIOS the first and only time it successfully booted up. My SSD literally boots up successfully randomly (only once unfortunately) and is detected in my BIOS randomly. I've tried switching cords etc and nothing has worked. I just want to get this damn thing running so I can see whats its like. I finally found a way to get the OS on this sucker and now it won't even boot up. Any help appreciated

    Read the article

  • o3d javascript uncaught referenceerror

    - by David
    hey, im new to javascript and am intersted in creating a small o3d script: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Test Game Website</title> </head> <body> <script type="text/javascript" src="o3djs/base.js"></script> <script type = "text/javascript" id="myscript"> o3djs.require('o3djs.camera'); window.onload = init; function init(){ document.write("jkjewfjnwle"); } </script> <div align="background"> <div id="game_container" style="margin: 0px auto; clear: both; background-image: url('./tmp.png'); width: 800px; height:600px; padding: 0px; background-repeat: no-repeat; padding-top: 1px;"></div> </div> </body> </html> the browser cant seem to find o3djs/base.js in this line <script type="text/javascript" src="o3djs/base.js"></script> and gives me an uncaught referenceerror at this line o3djs.require('o3djs.camera'); Obviously, because it can't find the o3djs/base.js... I have installed the o3d pluggin from google and they say that should be IT ive tried on firefox, ie and chrome thanks

    Read the article

  • Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

    - by cdonner
    I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

    Read the article

  • Application losing Printer within Terminal Services for remote users

    - by Richard
    Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • nginx+mysql5 loadtesting configuration strangeness

    - by genseric
    i am trying to setup a new server running on debian6 and trying to make it work smooth under load. i ve used a wordpress site as a test object, and tried the configurations on http://blitz.io. when i increase the mysql max_connections from 50 to 200 lots of timeouts start to occur. but on 50 , no timeouts and pretty well response times. nginx configuration is fine , i tuned the config so i dont see errors. so i presume it's related to the other configuration options of my.cnf . i read some about options but still cant find what max_connections problem is all about. btw, the server has 16gb of ram and a fine i7 cpu. here is the current my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] wait_timeout=60 connect_timeout=10 interactive_timeout=120 user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking bind-address = 127.0.0.1 key_buffer = 384M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 20 myisam-recover = BACKUP max_connections = 50 table_cache = 1024 thread_concurrency = 8 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M thanks in advance. i asked this question on SO but it's closed as off topic so i believe this is a SF question.

    Read the article

  • SMB access from XP to Windows 2008 R2

    - by Pablo
    Here's the thing... I have a very slow file copy performance from Windows XP clients to Windows 2008R2 servers. Here are the facts: Windows XP to Windows 2K3: Fast Windows XP to Windows 2K8: Very Slow Windows 7 to Windows (any): Fast Despite the fact that the obvious solution would be to upgrade to Windows 7, well, we have 900 desktops so it's not an option in the short time. I have tried everything: Disabling SMB2.0, disabling security signatures, changing the TCP Window size, disabling the W2K8 auto tuning, upgraded the drivers, etc. We eliminated the network; both the server and the client are connected to the same core switch (no hops, no routers, same VLAN). Upon monitoring the network with a packet capture utility, we see that the SMB packets being exchanged between the W2K8 and the XP machines are very small packets (256 bytes); despite the fact that the MTUs are properly set (1500) and there is no fragmentation whatsoever. In fact, those SMB packets show, on the IP datagram, that the window is 65535 or close. The same trace, made using the same application but instead of using a W2K8 share uses a Windows XP share (and that goes FAST) shows SMB packets of 4096 bytes. I can post the traces if necessary. So, why does XP-W2K8 negotiation arrange for 24-bytes SMB payload, whereas the XP-XP negotiation arranges for 4096 SMB packets? Any ideas? I am running short of those...

    Read the article

  • DIY NAS - links for Instructions

    - by Kaushik Gopal
    Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

    Read the article

  • IPv4 not enabled in Windows 7

    - by RidDeBakTiYar
    I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

    Read the article

  • Ripping a home video VCD on Linux or Windows with VLC or otherwise

    - by user259774
    I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

    Read the article

  • Authenticate users with Zimbra LDAP Server from other CentOS clients

    - by efesaid
    I'am wondering that how can integrate my database,web,backup etc.. centos servers with Zimbra LDAP Server. Does it require more advanced configuration than standart ldap authentication ? My zimbra server version is [zimbra@zimbra ~]$ zmcontrol -v Release 8.0.5_GA_5839.RHEL6_64_20130910123908 RHEL6_64 FOSS edition. My LDAP Server status is [zimbra@ldap ~]$ zmcontrol status Host ldap.domain.com ldap Running snmp Running stats Running zmconfigd Running I already installed nss-pam-ldapd packages to my servers. [root@www]# rpm -qa | grep ldap nss-pam-ldapd-0.7.5-18.2.el6_4.x86_64 apr-util-ldap-1.3.9-3.el6_0.1.x86_64 pam_ldap-185-11.el6.x86_64 openldap-2.4.23-32.el6_4.1.x86_64 My /etc/nslcd.conf is [root@www]# tail -n 7 /etc/nslcd.conf uid nslcd gid ldap # This comment prevents repeated auto-migration of settings. uri ldap://ldap.domain.com base dc=domain,dc=com binddn uid=zimbra,cn=admins,cn=zimbra bindpw **pass** ssl no tls_cacertdir /etc/openldap/cacerts When i run [root@www ~]# id username id: username: No such user But i am sure that username user exist on ldap server. EDIT : When i run ldapsearch command i got all result with credentials and dn. [root@www ~]# ldapsearch -H ldap://ldap.domain.com:389 -w **pass** -D uid=zimbra,cn=admins,cn=zimbra -x 'objectclass=*' # extended LDIF # # LDAPv3 # base <dc=domain,dc=com> (default) with scope subtree # filter: objectclass=* # requesting: ALL # # domain.com dn: dc=domain,dc=com zimbraDomainType: local zimbraDomainStatus: active . . .

    Read the article

  • how to correctly mount fat32 partition in Ubuntu in order to preserve case

    - by Dean
    I've found there are couple of problems might be related how my FAT32 partition was mounted. I hope you can help me to solve the problem. I also included the command I used to help others when they find this post, sorry to those might feel I should use less space. I've the following file structures on my disk dean@notebook:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x08860886 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS In the etc/fstab I've got UUID=91c57a65-dc53-476b-b219-28dac3682d31 / ext4 defaults 0 1 UUID=BEA2A8AFA2A86D99 /media/NTFS ntfs-3g quiet,defaults,locale=en_US.utf8,umask=0 0 0 UUID=0C0C-9BB3 /media/FAT32 vfat user,auto,utf8,fmask=0111,dmask=0000,uid=1000 0 0 /dev/sda5 swap swap sw 0 0 /dev/sda1 /media/sda1 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 /dev/sda2 /media/sda2 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 I checked my id using id and I've got dean@notebook:~$ id uid=1000(dean) gid=1000(dean) groups=4(adm),20(dialout),24(cdrom),46(plugdev),103(fuse),104(lpadmin),115(admin),120(sambashare),1000(dean) I don't know why with these settings I still have problem of using svn like in this one Thank you for your help!

    Read the article

  • Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

    - by Maxim Z.
    I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

    Read the article

  • Throttle CPU Usage consumed by Process

    - by Brett Powell
    We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

    Read the article

  • Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

    - by Synetech inc.
    Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

    Read the article

  • Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller

    - by thinkdreams
    I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID controller (an HP embedded controller) looks like: c0d0 (2 drive) RAID-1 c0d1 (2 drive) RAID-1 c0d2 (1 drive) No RAID <-- Failed c0d3 (1 drive) No RAID c0d4 (1 drive) No RAID c0d5 (1 drive) No RAID c0d2 has failed. I replaced the drive immediately with a spare using the hot-swap, but the c0d2 continues to mark itself as failed, even when I umount the partition. I'm loathe to reboot the server since I'm concerned about the server coming back up in rescue mode but I'm afraid that's the only way to get the system to re-read the drive. I assumed there was some sort of auto-detection routine for this, but I haven't been able to figure out the proper procedure. I have installed the HP ACU CLI utilties, so I can see the hardware RAID setup. I'd really like to find out what the proper procedure should have been, where I went wrong, and how to correct it now. Obviously this goes without saying I should NOT have listened to the DBA and set the drives up as RAID-1 throughout as was my first instinct. He wasn't worried about data loss, but it sure would have been easier to replace the failed drive. :)

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >