Search Results

Search found 21199 results on 848 pages for 'game controller'.

Page 322/848 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Ubuntu and bumblebee and intel problem

  - by LnxSlck

  I have a brain teaser that i can't solve. When 12.04 (64bits) came out, i did a fresh install and then installed bumblebee with: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get install bumblebee bumblebee-nvidia And Ubuntu recognized (System Settings - Details) Intel Card for primary card, and i could launch applications with optirun. I have: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) Now, a few days back, i did the exact same thing, installed from the same DVD everything the same, installed bumblebee the same way. Nvidia with Optirun works fine, but Ubuntu doesn't have 3D effects: root@deathstar:~# optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 520MX/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I never did anything to install Intel drivers (except installing mesa-utils), before bumblebee got everything working, but now i can't get Ubuntu to get Unity with 3D. Can someone help me please get Unity 3d working? Your help will be much appreciated

  Read the article

• Play Updated Retro Arcade Games for Free Courtesy of Microsoft

  - by Jason Fitzpatrick

  As part of a promotion for Internet Explorer 10, Microsoft comissioned Atari to update several classic retro games from the arcade and the Atari consoles. Fortunately for those of us looking for a retro gaming fix, you can play the games in any HTML5-enabled browser. While game play is really smooth on most games there are a few little quirks that using Internet Explorer 10 does take care of. First, if you’re not on IE10, you’ll see a little advertisement before you begin playing each game. Second, some games call on some of the new touch/motion variable functionality built into IE10 for the Windows 8 tablet experience and they’ll stall out when they reach the point in the game they need to call that variable. That said, we played quite a few games without any hiccups at all. Hit up the link below to play classics like Asteroids, Lunar Lander, Pong, Super Breakout, and more. Atari IE10 Promo Gallery [Atari] HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• Why doesn't Bumblebee work with Nvidia GT640M?

  - by Dickson Wong

  I've done a clean install of Ubuntu 12.04 from a liveCD on a Samsung Series 7 Chronos with a 3rd Gen i7 and the Nvidia GeForce GT 640M. I've followed this: (https://wiki.ubuntu.com/Bumblebee#Installation) to install bumblebee so I can switch to my discrete GPU. I have not used ironhide, or preivous bumblee since it's a clean install. When I use optirun, optirun says it can't initialize the GPU: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ERROR]Aborting because fallback start is disabled. I've looked at the troubleshooting page for bumblebee and I have the correct driver and do not think I have aspci disabled. Also, my keyboard becomes very unresponsive and my mouse skips and isn't smooth after optirun crashes. The only thing to fix this is a reboot. Here's my lspci | grep VGA output: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd2 (rev ff) It seems Ubuntu can see my graphics card. I don't really know what's going on.

  Read the article

• Minecraft in jdk 1.7.0_u2 x64

  - by Nela Drobná

  I have Ubuntu 11.10 64-bit and I installed JDK 1.7.0 update 2 x64 via webupd8 page. But currently I have problem with minecraft game. After downloading launcher from Minecraft.net and lauch the game by java -jar /home/zrebec/Downloads/minecraft.jar launcehr is launched normaly, after login the game download the updates but then I got just the black screen with this in terminal: Setting user: zrebec, -356009615199623309 Exception in thread "Minecraft main thread" java.lang.UnsatisfiedLinkError: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1928) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825) at java.lang.Runtime.load0(Runtime.java:792) at java.lang.System.load(System.java:1059) at org.lwjgl.Sys$1.run(Sys.java:69) at java.security.AccessController.doPrivileged(Native Method) at org.lwjgl.Sys.doLoadLibrary(Sys.java:65) at org.lwjgl.Sys.loadLibrary(Sys.java:81) at org.lwjgl.Sys.<clinit>(Sys.java:98) at org.lwjgl.opengl.Display.<clinit>(Display.java:132) at net.minecraft.client.Minecraft.a(SourceFile:180) at net.minecraft.client.Minecraft.run(SourceFile:648) at java.lang.Thread.run(Thread.java:722) Please anyone can help me with this? I think that problem will be in architecture becase: liblwjgl.so: /home/zrebec/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) Any idea please? I know, maybe this one is off topic because maybe its not Ubuntu problem maybe but in 64-bit works all perfectly and I think that accepted answer can help to many users and can make better playing games under linux. Really. Thank you very much for any idea.

  Read the article

• Fight for your rights as a video gamer.

  - by Chris Williams

  Soon, the U.S. Supreme Court may decide whether to hear a case that could have a lasting impact on computer and video games. The case before the Court involves a law passed by the state of California attempting to criminalize the sale of certain computer and video games. Two previous courts rejected the California law as unconstitutional, but soon the Supreme Court could have the final say. Whatever the Court's ruling, we must be prepared to continue defending our rights now and in the future. To do so, we need a large, powerful movement of gamers to speak with one voice and show that we won't sit back while lawmakers try to score political points by scapegoating video games and treating them differently than books, movies, and music. If the Court decides to hear the case, we're going to need thousands of activists like you who can help defend computer and video games by writing letters to editors, calling into talk radio stations, and educating Americans about our passion for and appreciation of computer and video games. You can help build this movement right now by inviting all your friends and fellow gamers to join the Video Game Voters Network. Use our simple tool to send an email to everyone you know asking them to stand up for gaming rights: http://videogamevoters.org/movement You can also help spread the word through Facebook and Twitter, or you can simply forward this email to everyone you know and ask them to sign up at videogamevoters.org. Time after time, courts continue to reject politicians' efforts to restrict the sale of computer and video games. But that doesn't mean the politicians will stop trying anytime soon -- in fact, it means they're likely to ramp up their efforts even more. To stop them, we must make it clear that gamers will continue to stand up for free speech -- and that the numbers are on our side. Help make sure we're ready and able to keep fighting for our gaming rights. Spread the word about the Video Game Voters Network right now: http://videogamevoters.org/movement Thank you. -- Video Game Voters Network

  Read the article

• Where does jQuery fit-in with frameworks like JavaScriptMVC, BackboneJS, SproutCore and Knockout?

  - by Prisoner ZERO

  I have been happily using JQuery for the last 2 years and have been quite sucessful creating some really cool functionality with it...so I am very comfortable with it. I also beleive the future of the web will continue on the current client-side path. However... The next challenge seems to be coming in the form of various controller frameworks: KnockoutJS, BackboneJS, SproutCore, JavaScriptMVC (the list goes on). Additonally, there are some great AMD Loader tools for use like RequireJS or LabJS etc. However, jQuery now has define and then capabilities baked-in. It's getting harder-and-harder to keep track of it all... And now, my task seems to be to evaluate/decide-on a strategic-direction for using some form of either an MVC or MVVM framework client-side...but I have so many questions. Where does JQuery fit-in with the various controller-frameworks mentioned above? Is JQuery used alongside each or do some of them have their own 'JQuery-styled version' baked-in? Are tools like RequireJS still needed if you implement one of the various controller-frameworks mentioned above? Does the define and then capabilities baked-into JQuery now supercede the AMD Loader mentioned above? Which one seems most modular? (see notes below) NOTES: One thing I don't want in any future-framework is the requirement of having to take-in vast amounts of functionality that I don't use. Meaning, I would rather use a framework that is truly modular. For example, to use jQuery UI you have to take-in a lot other core libraries that you might not actually use. I will be experimenting with each one, but some REAL feedback would be great. I've seen some 'similar' questions, but none have really answered the above skew. Thanks in advance!

  Read the article

• What could be causing frequent display freezes?

  - by austen

  I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

  Read the article

• Restful WebAPI VS Regular Controllers

  - by Rohan Büchner

  I'm doing some R&D on what seems like a very confusing topic, I've also read quite a few of the other SO questions, but I feel my question might be unique enough to warrant me asking. We've never developed an app using pure WebAPI. We're trying to write a SPA style app, where the back end is fully decoupled from the front end code Assuming our service does not know anything about who is accessing/consuming it: WebAPI seems like the logical route to serve data, as opposed to using the standard MVC controllers, and serving our data via an action result and converting it to JSON. This to me at least seems like an MC design... which seems odd, and not what MVC was meant for. (look mom... no view) What would be considered normal convention in terms of performing action(y) calls? My sense is that my understanding of WebAPI is incorrect. The way I perceive WebAPI, is that its meant to be used in a CRUD sense, but what if I want to do something like: "InitialiseMonthEndPayment".... Would I need to create a WebAPI controller, called InitialiseMonthEndPaymentController, and then perform a POST... Seems a bit weird, as opposed to a MVC controller where i can just add a new action on the MonthEnd controller called InitialisePayment. Or does this require a mindset shift in terms of design? Any further links on this topic will be really useful, as my fear is we implement something that might be weird an could turn into a coding/maintenance concern later on?

  Read the article

• How to connect two ubuntu computers with ethernet cable

  - by Lukasz Zaroda

  I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

  Read the article

• What is the point of dynamic allocation in C++?

  - by Aerovistae

  I really have never understood it at all. I can do it, but I just don't get why I would want to. For instance, I was programming a game yesterday, and I set up an array of pointers to dynamically allocated little enemies in the game, then passed it to a function which updates their positions. When I ran the game, I got one of those nondescript assertion errors, something about a memory block not existing, I don't know. It was a run-time error, so it didn't say where the problem was. So I just said screw it and rewrote it with static instantiation, i.e.: while(n<4) { Enemy tempEnemy = Enemy(3, 4); enemyVector.push_back(tempEnemy); n++; } updatePositions(&enemyVector); And it immediately worked perfectly. Now sure, some of you may be thinking something to the effect of "Maybe if you knew what you were doing," or perhaps "n00b can't use pointers L0L," but frankly, you really can't deny that they make things way overcomplicated, hence most modern languages have done away with them entirely. But please-- someone -- What IS the point of dynamic allocation? What advantage does it afford? Why would I ever not do what I just did in the above example?

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Using PDO with MVC

  - by mister martin

  I asked this question at stackoverflow and received no response (closed as duplicate with no answer). I'm experimenting with OOP and I have the following basic MVC layout: class Model { // do database stuff } class View { public function load($filename, $data = array()) { if(!empty($data)) { extract($data); } require_once('views/header.php'); require_once("views/$filename"); require_once('views/footer.php'); } } class Controller { public $model; public $view; function __construct() { $this->model = new Model(); $this->view = new View(); // determine what page we're on $page = isset($_GET['view']) ? $_GET['view'] : 'home'; $this->display($page); } public function display($page) { switch($page) { case 'home': $this->view->load('home.php'); break; } } } These classes are brought together in my setup file: // start session session_start(); require_once('Model.php'); require_once('View.php'); require_once('Controller.php'); new Controller(); Now where do I place my database connection code and how do I pass the connection onto the model? try { $db = new PDO('mysql:host='.DB_HOST.';dbname='.DB_DATABASE.'', DB_USERNAME, DB_PASSWORD); $db->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch(PDOException $err) { die($err->getMessage()); } I've read about Dependency Injection, factories and miscellaneous other design patterns talking about keeping SQL out of the model, but it's all over my head using abstract examples. Can someone please just show me a straight-forward practical example?

  Read the article

• In MVC, why can't a model create a view?

  - by MUY Belgium

  I have a web application written in Perl with a controller, some "views" and some "Models". Each "Model" is corresponding to one "View". The controller (one file) creates an Model object corresponding to each view (view is a CGI argument) then retrieve the view from the module it has just created. Indeed, this should be bad thing but can you argue a bit more about it. My first idea was that since the object "Model" depends upon the "view", then the "model" is actually a view. But also the fact that ALL the cgi parameters are passed to the Model causes the "Model" to become not truelly a view but to loose all interest, since it is only related to the current implementation of the web apps. On other words, that the "Model" keep model but loose its "comprehensiveness" ("Model" is not easily understandable). I'm am quite new in project analysis, so please do not be too harsh. Why is this bad? I have made a prototype with the main structures I have understood of this web application, made as short as possible. #Model.pm package Model; import { # this requires an attribute called "view" # and this require an argument which is the cgi params } ... #View1.pm package View1; ... #Model1.pm package ModelView1 ; base Model; use View1; sub new { my $class = shift; my $arg = shift; Model::DoSomething($arg); $self->view = new View1($arg); ... } #controller.cgi my $model = 0; ... $model = new Model1( cgi_param => params() ); #there is severall models here ... print $model->get_view()->get_html();

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• What is the best approach to solve a factory method problem which has to be an instance?

  - by Iago

  I have to add new funcionality in a web service legacy project and I'm thinking what is the best approach for a concrete situation. The web service is simple: It receives a XML file, unmarshalling, generates response's objects, marshalling and finally it sends the response as a XML file. For every XML files received, the web service always responds with the same XML structure. What I have to do is to generate a different XML file according to the XML received. So I have a controller class which has all marshalling/unmarshalling operations, but this controller class has to be an instance. Depending on XML received I need some marshalling methods or others. Trying to make few changes on legacy source, what is the best approach? My first approach was to do a factory method pattern with the controller class, but this class has to be an instance. I want to keep, as far as it goes, this structure: classController.doMarshalling(); I think this one is a bit smelly: if(XMLReceived.isTypeOne()) classController.doMarshallingOne(); else if(XMLReceived.isTypeTwo()) classController.doMarshallingTwo(); else if(XMLReceived.isTypeThree()) classController.doMarshallingThree(); else if ... I hope my question is well understood

  Read the article

• Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

  - by 5th Wheel

  The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

  Read the article

• Problem with installing Nvidia display drivers on Ubuntu 13.10

  - by Pascal

  Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

  Read the article

• Ubuntu 12.04 slow boot on ASUS, attached with dmesg and bootchart

  - by stanleyhunk

  I heard that Ubuntu can boot up around 30sec, but I take more than 60sec every time my Ubuntu boot. I also read some forum said need to post the dmesg and bootchart to identify which process slowing down the booting time, as I'm not expert in Ubuntu and wish to learn more about it, I humbly ask any pro here to teach me how. My laptop specs: Model : ASUS K45VS RAM : 8MB CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz x 8 Graphic Card : nVidia GeForce GT 645M HDD : 750GB OS : Single boot Ubuntu 12.04LTS System.uname : Linux 3.8.0-39-generic #58~precise1-Ubuntu SMP Fri May 2 21:33:40 UTC 2014 x86_64 System.release : Ubuntu 12.04.4 LTS System.kernel.options : BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic root=UUID=c8a71503-bce8-406c-9a5f-5aa8284f5c7c ro quiet splash My dmesg (which highlighted to the huge time frame gap): [ 30.772656] cgroup: libvirtd (1961) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772659] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.772683] cgroup: libvirtd (1961) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772710] cgroup: libvirtd (1961) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 32.140335] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 32.505619] ACPI Error: Field [TMPB] at 1081344 exceeds Buffer [ROM1] size 262144 (bits) (20121018/dsopcode-236) [ 32.505624] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff880224e91f00), AE_AML_BUFFER_LIMIT (20121018/psparse-537) [ 802.034422] audit_printk_skb: 69 callbacks suppressed [ 802.034428] type=1400 audit(1400914804.392:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" [ 1581.300901] type=1400 audit(1400915584.816:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" My Bootchart.png: Looking forward to learn to improve both my booting time and knowledge. Thanks in advance :)

  Read the article

• Low Graphics and laggy screen after update to 13.10 from 13.04

  - by Wh0RU

  After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

  Read the article

• Bust Out these 13 Spooky Games for Halloween

  - by Jason Fitzpatrick

  Looking for a suitably spooky board game for Halloween? This roundup includes everything from the light-hearted to the dark and challenging. Over at GeekDad they’ve rounded up 13 horror/Halloween themed board games to help you fill your holiday board gaming quota. The list includes classics like the in-depth and atmospheric Arkham Horror to more recent and kid-friendly GeistesBlitz. Although we think their list is rock solid and includes some great titles, we’re disappointed to see that Witch of Salem, a great lighter-weight alternative to Arkham Horror for those nights you want some cooperative H.P. Lovecraft inspired play without the massive setup and game length, didn’t make the list. To check out the full GeekDad list hit up the link below, for more boardgame-centric reading we highly recommend the excellent board gaming site BoardgameGeek. 13 Spooky Board Games for Your Halloween Game Night [GeekDad] What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >