Search Results

Search found 26947 results on 1078 pages for 'util linux'.

Page 322/1078 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Best option for storage clustering

  - by sam

  I'm working on an application that requires a large amount of storage space and I want to handle storage 'in-house' (Much cheaper than, say, S3) so we will have multiple servers (Initially 4) with large amounts of storage (6TB each). The storage will need to be very flexible and configurable, each piece of data should be replicated on at least 2 servers and must be easily readable/writable from ether an API of a UNIX device/file/folder like a normal drive, I don't mind which. We must also be able to easily offload content to our HTTP CDN (Edgecast), it doesn't need to have built in HTTP support but if it doesn't I'm going to have to write something to get the files onto HTTP so they can be pulled by the CDN. I've looked at a lot of solutions including Eucalyptus Walrus OpenStack Object Storage MogileFS and some others which I can't remember All the servers will be running RHEL 6, they have 4x1.5TB drives which will be RAID1'd into a single partition. All the servers have 1GB/s connections between them and 100MB/s connections to the internet with unlimited bandwidth. They have 2x2.66ghz processors. I understand there isn't a single, perfect answer but it would be nice to get some pointers.

  Read the article

• Limiting Sybase ASE 15 CPU usage on VM

  - by reiniero

  I've set up a single CPU Sybase ASE 15.7 test/hobby/experimentation system on a Debian Squeeze x64 KVM VM. I notice the CPU load goes to 100% and stays there. Definitely not a Sybase guru, only interested to see if some programs I'm running work on the database. Looking at Sybase docs it seems ASE detects the machine is idle and then takes over all processing just waiting for a connection (and if needed, doing some housekeeping apparently). Normally that would be fine but as it is running in a VM it's taking away processor resources other VMs could use - and the increased fan noise of the PC near my desk annoy me. I've tried to remedy this: set the "runnable process search count" parameter from DEFAULT (2000 IRC) to 3 in /opt/sybase/ASE-15_0/SYBASE.cfg from http://sybase.reygrobellet.com/tutorials/install_sybase_vb/standalone04_configure_oralin11#TOC-Configure-kernel I added this to my /etc/init.d/sybase startup script: echo 0 /proc/sys/kernel/randomize_va_space (though I don't think it'll make much difference) How can I tell Sybase to "behave" and not hog the processor - I don't mind reduced performance.

  Read the article

• Improving TCP performance over a gigabit network with lots of connections and high traffic of small packets

  - by MinimeDJ

  I’m trying to improve my TCP throughput over a “gigabit network with lots of connections and high traffic of small packets”. My server OS is Ubuntu 11.10 Server 64bit. There are about 50.000 (and growing) clients connected to my server through TCP Sockets (all on the same port). 95% of of my packets have size of 1-150 bytes (TCP header and payload). The rest 5% vary from 150 up to 4096+ bytes. With the config below my server can handle traffic up to 30 Mbps (full duplex). Can you please advice best practice to tune OS for my needs? My /etc/sysctl.cong looks like this: kernel.pid_max = 1000000 net.ipv4.ip_local_port_range = 2500 65000 fs.file-max = 1000000 # net.core.netdev_max_backlog=3000 net.ipv4.tcp_sack=0 # net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.core.somaxconn = 2048 # net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 # net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_mem = 50576 64768 98152 # net.core.wmem_default = 65536 net.core.rmem_default = 65536 net.ipv4.tcp_window_scaling=1 # net.ipv4.tcp_mem= 98304 131072 196608 # net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_rfc1337 = 1 net.ipv4.ip_forward = 0 net.ipv4.tcp_congestion_control=cubic net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 # net.ipv4.tcp_orphan_retries = 1 net.ipv4.tcp_fin_timeout = 25 net.ipv4.tcp_max_orphans = 8192 Here are my limits: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 193045 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1000000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1000000 [ADDED] My NICs are the following: $ dmesg | grep Broad [ 2.473081] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.12-0 (2011/03/20) [ 2.477808] bnx2x 0000:02:00.0: eth0: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 28, node addr d8:d3:85:bd:23:08 [ 2.482556] bnx2x 0000:02:00.1: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 40, node addr d8:d3:85:bd:23:0c [ADDED 2] ethtool -k eth0 Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: off [ADDED 3] sudo ethtool -S eth0|grep -vw 0 NIC statistics: [1]: rx_bytes: 17521104292 [1]: rx_ucast_packets: 118326392 [1]: tx_bytes: 35351475694 [1]: tx_ucast_packets: 191723897 [2]: rx_bytes: 16569945203 [2]: rx_ucast_packets: 114055437 [2]: tx_bytes: 36748975961 [2]: tx_ucast_packets: 194800859 [3]: rx_bytes: 16222309010 [3]: rx_ucast_packets: 109397802 [3]: tx_bytes: 36034786682 [3]: tx_ucast_packets: 198238209 [4]: rx_bytes: 14884911384 [4]: rx_ucast_packets: 104081414 [4]: rx_discards: 5828 [4]: rx_csum_offload_errors: 1 [4]: tx_bytes: 35663361789 [4]: tx_ucast_packets: 194024824 [5]: rx_bytes: 16465075461 [5]: rx_ucast_packets: 110637200 [5]: tx_bytes: 43720432434 [5]: tx_ucast_packets: 202041894 [6]: rx_bytes: 16788706505 [6]: rx_ucast_packets: 113123182 [6]: tx_bytes: 38443961940 [6]: tx_ucast_packets: 202415075 [7]: rx_bytes: 16287423304 [7]: rx_ucast_packets: 110369475 [7]: rx_csum_offload_errors: 1 [7]: tx_bytes: 35104168638 [7]: tx_ucast_packets: 184905201 [8]: rx_bytes: 12689721791 [8]: rx_ucast_packets: 87616037 [8]: rx_discards: 2638 [8]: tx_bytes: 36133395431 [8]: tx_ucast_packets: 196547264 [9]: rx_bytes: 15007548011 [9]: rx_ucast_packets: 98183525 [9]: rx_csum_offload_errors: 1 [9]: tx_bytes: 34871314517 [9]: tx_ucast_packets: 188532637 [9]: tx_mcast_packets: 12 [10]: rx_bytes: 12112044826 [10]: rx_ucast_packets: 84335465 [10]: rx_discards: 2494 [10]: tx_bytes: 36562151913 [10]: tx_ucast_packets: 195658548 [11]: rx_bytes: 12873153712 [11]: rx_ucast_packets: 89305791 [11]: rx_discards: 2990 [11]: tx_bytes: 36348541675 [11]: tx_ucast_packets: 194155226 [12]: rx_bytes: 12768100958 [12]: rx_ucast_packets: 89350917 [12]: rx_discards: 2667 [12]: tx_bytes: 35730240389 [12]: tx_ucast_packets: 192254480 [13]: rx_bytes: 14533227468 [13]: rx_ucast_packets: 98139795 [13]: tx_bytes: 35954232494 [13]: tx_ucast_packets: 194573612 [13]: tx_bcast_packets: 2 [14]: rx_bytes: 13258647069 [14]: rx_ucast_packets: 92856762 [14]: rx_discards: 3509 [14]: rx_csum_offload_errors: 1 [14]: tx_bytes: 35663586641 [14]: tx_ucast_packets: 189661305 rx_bytes: 226125043936 rx_ucast_packets: 1536428109 rx_bcast_packets: 351 rx_discards: 20126 rx_filtered_packets: 8694 rx_csum_offload_errors: 11 tx_bytes: 548442367057 tx_ucast_packets: 2915571846 tx_mcast_packets: 12 tx_bcast_packets: 2 tx_64_byte_packets: 35417154 tx_65_to_127_byte_packets: 2006984660 tx_128_to_255_byte_packets: 373733514 tx_256_to_511_byte_packets: 378121090 tx_512_to_1023_byte_packets: 77643490 tx_1024_to_1522_byte_packets: 43669214 tx_pause_frames: 228 Some info about SACK: When to turn TCP SACK off?

  Read the article

• Sign multiple domains with single Domain Key (dk-filter)

  - by Lashae

  Motivation The private shopping website GILT, send periodical update emails from giltgroupe.bounce.ed10.net however all of the mails are signed with domain keys of giltgroupe.com. mailed-by giltgroupe.bounce.ed10.net signed-by giltgroupe.com My Story I couldn't manage to sign x.com with y.com 's domain key using dk-filter under Debian Lenny with postfix. If I try to init dk-filter service with following arguments: DAEMON_OPTS="$DAEMON_OPTS -d x.com,y.com -c nofws -k -i /var/dk-filter/internal_hosts -s /etc/dk-keys.conf" dk-filter service signs with domain x.com (d=x.com) If I change the daemon arg.s as following: DAEMON_OPTS="$DAEMON_OPTS -d x.com -c nofws -k -i /var/dk-filter/internal_hosts -s /etc/dk-keys.conf" then emails sent From y.com is not being signed. the dk-keys.conf file is as follows: *:/var/dk-filter/y.com/mail I managed to do same thing with DKIM, works perfect. However DK doesn't seem to work. I don't have any problem signing y.com's emails with y.com's key and x.com's emails x.com's key, which indicates there is no configuration problem. Do you have any experience/advice to make it possible to sign emails from multiple domains by a specific chosen domain?

  Read the article

• How can I force a MySQL table to become corrupted?

  - by Rory McCann

  I have written a simple Nagios plugin that calls mysqlcheck (which checks for corrupted tables) and will give a warning if any are corrupt. However none of my tables are corrupt now. So I'm not 100% sure that my plugin is working fine. I have a dev server that's not misson critical. How can I force one (or any) of the tables there to be corrupt so that I can test my nagios alert? For the record the server is Ubuntu Dapper and the mysql is version 5.0

  Read the article

• Rate limit a wireless interface

  - by Jamie Hankins

  I have access to my routers SSH and IPTables. I want to rate limit my guest network to 1Mb/s so they can't guzzle my bandwidth. rai1 RTWIFI SoftAP ESSID:"GuestNetwork" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi0 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F8 Bit Rate=300 Mb/s wdsi1 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi2 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s wdsi3 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s I'm just wondering the command I need to limit it. I tried the iwconfig limit command but it failed. Thanks

  Read the article

• Flexible traffic & bandwidth monitor

  - by BrNathan

  I have looked around, but have not found anything to meet our needs. I need something that can log all connections & bandwidth consumption. We need it for analysis: by protocol, source IP (& MAC if possible), destination, etc. Ideally we are looking for something that can produce custom graphs & also uses mysql. All connections go through one server on a bridged connection (2 network cards) so it is easy to pickup traffic. We are not concerned so much with internal LAN traffic as what passes in & out to the firewall. Thanks for you suggestions. Update: I use Ubuntu 10.04

  Read the article

• Bash wonkyness on Ubuntu versus RHEL

  - by d34dh0r53

  Fellow faulters, I'm playing around with a one liner that I've developed on a RHEL 5.4 box and I have it working perfectly: TOTAL_RAM=`free | grep Mem: | awk '{ print $2 }'`; \ ps axo rss,comm,pid | awk -v total_ram=$TOTAL_RAM \ '{ proc_list[$2] += $1; } END { for (proc in proc_list) \ { proc_pct = (proc_list[proc]/total_ram)*100; printf("%d\t%s\t%0.2f%\n", proc_list[proc],proc,proc_pct); }}' \ | sort -n | tail -n 10 Which outputs something like the following on my RHEL box: 3736 logmon 0.01% 4156 EvMgrC 0.01% 4692 hald 0.01% 5020 ntpd 0.02% 6252 sshd 0.02% 7784 cvd 0.02% 9224 snmpd 0.03% 13068 dsm_sa_datamgr3 0.04% 23320 dsm_om_connsvc3 0.07% 4249864 mysqld 12.90% However on my Ubuntu 9.04 slice I get this: awk: run time error: not enough arguments passed to printf("%d %s %0.2f% ") FILENAME="-" FNR=104 NR=104 33248 console-kit-dae 3.17 I think it has to be bash that is borking something, but I'm really not doing anything that should be that bash specific. The RHEL box is running: # yum info bash | grep -e Version -e Release Version : 3.2 Release : 24.el5 And the Ubuntu box: # apt-cache show bash | grep -e Version Version: 3.2-5ubuntu1 I haven't dug into this super deeply, and thought I'd ping my fellow johnnys to see if you've ever run across this before. /bow

  Read the article

• Xubuntu login hangs after Cancel Button click

  - by akester

  I'm running Xubuntu 12.04 (I installed using the alternative installer.) running in Virtaulbox 4.1.20 My issue is with the login screen (lightdm-gtk-greeter). It usually runs just fine, and allows users to log in and out but it will hang if the user presses the cancel button. The interface is still working (ie, shutdown menu is still available, I can switch to a different tty) but the username or password field (depending on when the button is hit) is disabled. Restarting lightdm will reset the screen, but the problem still exists. The issue is only with the cancel button. The login, session, and language buttons/menus as well as the accessibility and shutdown menu appear to work normally. I've modified some of the config files for lighdm-gtk-greeter, specifically /etc/lightdm/lighdm-gtk-greeter.conf to change the background image and /etc/lightdm/lightdm.conf to disable the user list. I did not check to see if the error existed before the changes took place. The changes have been restored the default settings but the problem persists. Here is the output of /var/log/lightdm/lightdm.log when the screen is hung: [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=2072 [+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Adding default seat [+0.00s] DEBUG: Starting seat [+0.00s] DEBUG: Starting new display for greeter [+0.00s] DEBUG: Starting local X display [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.03s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.04s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.04s] DEBUG: Launching X Server [+0.05s] DEBUG: Launching process 2078: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.05s] DEBUG: Waiting for ready signal from X server :0 [+0.05s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.05s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.28s] DEBUG: Got signal 10 from process 2078 [+0.28s] DEBUG: Got signal from X server :0 [+0.28s] DEBUG: Connecting to XServer :0 [+0.29s] DEBUG: Starting greeter [+0.29s] DEBUG: Started session 2082 with service 'lightdm', username 'lightdm' [+0.36s] DEBUG: Session 2082 authentication complete with return value 0: Success [+0.36s] DEBUG: Greeter authorized [+0.36s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+0.36s] DEBUG: Session 2082 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter [+0.58s] DEBUG: Greeter connected version=1.2.1 [+0.58s] DEBUG: Greeter connected, display is ready [+0.58s] DEBUG: New display ready, switching to it [+0.58s] DEBUG: Activating VT 7 [+1.04s] DEBUG: Greeter start authentication for andrew [+1.04s] DEBUG: Started session 2137 with service 'lightdm', username 'andrew' [+1.09s] DEBUG: Session 2137 got 1 message(s) from PAM [+1.09s] DEBUG: Prompt greeter with 1 message(s) [+17.24s] DEBUG: Cancel authentication [+17.24s] DEBUG: Session 2137: Sending SIGTERM

  Read the article

• Multiple VM environment for developing/testing

  - by Hippo

  I was asked to create a setup for automated deployment, configuration, installation/updates of websites. A bunch of small websites will be bundled on one server. If more website will come up a new server will be created... I decided to us chef for this task. All servers will be running Ubuntu at the same version and configuration. The actual question: Everything needs to be tested properly before starting live deployment, so my question is: What is the best virtualisation tool to run multiple (5 - 10) virtual machines on a Ubuntu Laptop? Requirements: easy setup, fast (clone/snapshot of VMs) All VMs should be easily connected to the internet and should be able to communicate to each other (Open-Source / free would be great) So far I looked into: Virtual box is more for Desktop virtualisation, Cloning not possible, every new machine needs to be installed VMware Player Any suggestions? If there are any question about what I am doing please comment on this question, I will answer as soon as possible. This question is not about the actual set up, it is about a nice working environment.

  Read the article

• What does the filesystem give me?

  - by Alec

  I'm writing a specialised database. It currently sits atop of ext4, with one big file that it reads and writes to. I'm wondering whether it would be worth forgoing the filesystem and reading and writing directly to the device. I already use O_DIRECT, so as far as I can tell it wouldn't require much of a code change. What might the risks, advantages and disadvantages of forgoing the filesystem be? Is it likely to improve performance, or harm it?

  Read the article

• Error with procmail script to use Maildir format

  - by bradlis7

  I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

  Read the article

• pfSense + DDoS Protection

  - by Jeremy

  I run a gaming community on a colo with a 100Mbps port. I want to buy a very cheap 35 dollar server with the same 100Mbps port, and run pfSense to use as a hardware firewall. I'm dealing with a bunch of 14 year old kids that have access to botnets, so it can become a bit necessary to get something like this. My overall question, is using pfSense on a cheap identical datacenter/port speed server worth it to actually block DDoS attacks? A bit more into detail since I assume you will ask this, the attacks we receive are normally around 1Gbps. We currently run CentOS using CSF Firewall, and even when using a software firewall, we block 500Mbps UDP floods, or just generic attacks pretty easily. Thanks, - Necro

  Read the article

• Windows 8 won't boot after Boot Repair

  - by Rudolph Gottesheim

  I've got a Sony Vaio laptop. Until yesterday I had Windows 7 and Ubuntu 12.04 installed. Today I upgraded to Windows 8, which killed my OS selection screen. So I booted to Ubuntu 12.10 from a USB stick and ran Boot Repair. This recovered the GRUB screen and let me boot into my Ubuntu 12.04 installation, but now I can' boot Windows 8. When I select the option that booted Windows 7 before, it looks like it wants to start Windows 7 (sic) again (black screen, with the text "Windows is loading" or something), but then reboots the machine after a few seconds. I'm sure Boot Repair can fix this, but I know far too little about the whole booting thing to know the right settings for it. Here's my boot repair report thing.

  Read the article

• Missing over 100GB of Space on sda1 RHEL

  - by WifiGhost

  I have a server setup with a RAID 5 using (3) 500GB drives, 1 as a spare so unused in the RAID. So in my mind i start out with 990GB with the RAID 5 in place. When looking at DF or the built in disk space utility i only see a total of about 882GB, how can i find where the 100+GB went? How can i get it back? I've checked the RAID 5 BIOS and i see all the space. I've tried looking manually and through terminal commands with no luck. Filesystem - 1K-blocks - Used Available - Use% - Mounted on /dev/mapper/vg_web-lv_root 838084192 48368700 747153060 7% / tmpfs 12104644 592 12104052 1% /dev/shm /dev/sda1 495844 121546 348698 26% /boot /dev/mapper/vg_web-lv_home 82569904 259136 78116468 1% /home Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_web-lv_root 800G 47G 713G 7% / tmpfs 12G 592K 12G 1% /dev/shm /dev/sda1 485M 119M 341M 26% /boot /dev/mapper/vg_web-lv_home 79G 254M 75G 1% /home

  Read the article

• Error when make "make install" PHP WebDav

  - by kron

  Hi, I'm having issues install PHP WebDAV onto Fedora8 - after downloading and running make install I get the following errors: [root@ip-18-192-114-35 dav]# make install /bin/sh /tmp/dav/libtool --mode=compile gcc -I. -I/tmp/dav -DPHP_ATOM_INC -I/tmp/dav/include -I/tmp/dav/main -I/tmp/dav -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/dav/dav.c -o dav.lo gcc -I. -I/tmp/dav -DPHP_ATOM_INC -I/tmp/dav/include -I/tmp/dav/main -I/tmp/dav -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/dav/dav.c -fPIC -DPIC -o .libs/dav.o /tmp/dav/dav.c:21:23: error: ne_socket.h: No such file or directory /tmp/dav/dav.c:22:24: error: ne_session.h: No such file or directory /tmp/dav/dav.c:23:22: error: ne_utils.h: No such file or directory /tmp/dav/dav.c:24:21: error: ne_auth.h: No such file or directory /tmp/dav/dav.c:25:22: error: ne_basic.h: No such file or directory /tmp/dav/dav.c:26:20: error: ne_207.h: No such file or directory /tmp/dav/dav.c:35: error: expected specifier-qualifier-list before 'ne_session' /tmp/dav/dav.c: In function 'dav_destructor_dav_session': /tmp/dav/dav.c:152: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:153: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:155: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:156: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:157: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:158: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c: In function 'cb_dav_auth': /tmp/dav/dav.c:194: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:194: error: 'NE_ABUFSIZ' undeclared (first use in this function) /tmp/dav/dav.c:194: error: (Each undeclared identifier is reported only once /tmp/dav/dav.c:194: error: for each function it appears in.) /tmp/dav/dav.c:195: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c: In function 'zif_webdav_connect': /tmp/dav/dav.c:212: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:212: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:213: error: 'ne_uri' undeclared (first use in this function) /tmp/dav/dav.c:213: error: expected ';' before 'uri' /tmp/dav/dav.c:215: error: 'uri' undeclared (first use in this function) /tmp/dav/dav.c:259: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:260: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:262: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:264: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:267: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:269: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:271: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c: In function 'get_full_uri': /tmp/dav/dav.c:304: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:307: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:313: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:313: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:314: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c: In function 'zif_webdav_get': /tmp/dav/dav.c:329: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:329: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:330: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:330: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:348: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:354: error: 'ne_accept_2xx' undeclared (first use in this function) /tmp/dav/dav.c:359: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:359: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_put': /tmp/dav/dav.c:377: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:377: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:378: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:378: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:396: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:405: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:405: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_delete': /tmp/dav/dav.c:422: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:422: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:423: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:423: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:441: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:448: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:448: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_mkcol': /tmp/dav/dav.c:465: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:465: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:466: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:466: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:484: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:491: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:491: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_copy': /tmp/dav/dav.c:510: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:510: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:511: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:511: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:539: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:550: error: 'NE_DEPTH_INFINITE' undeclared (first use in this function) /tmp/dav/dav.c:550: error: 'NE_DEPTH_ZERO' undeclared (first use in this function) /tmp/dav/dav.c:554: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:554: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_move': /tmp/dav/dav.c:573: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:573: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:574: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:574: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:598: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:611: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:611: error: invalid type argument of '->' make: *** [dav.lo] Error 1 Any help would be much appreciated. Thanks!

  Read the article

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• KVM CLI install for CentOS 6.3 defaults to Minimal Install

  - by i.h4d35

  So I now I've installed KVM (and its associated tools and packages- libvirt, VMM etc.). On the GUI (i.e using the VMM), installation works as its supposed to. However, when I try to create a VM using the command line interface, the OS (I am working with CentOS 6.3) defaults to a Minimal Install instead of giving me options to choose from at the time of installation. I am trying to install using the following command: virt-install \ --connect qemu:///system \ --virt-type kvm --name testVM2 \ --ram 512 --disk path=/var/lib/libvirt/images/testVM2.img,size=8 --vnc \ --cdrom /media/db18de8e-0853-49fb-80de-5c794d58a46f/CentOS-6.3- x86_64-bin-DVD1.iso \ --network network=default Specifying the OS-type or the OS-variant parameters doesn't make a difference. Is there something that I am missing out on or some other parameter that I must specify? Thanks in advance.

  Read the article

• help with xorg.conf: xrandr on one of two widescreen monitors; rhel5, kde, ATI Radeon X1300

  - by user35997

  Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel. Thanks1 My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 2407WFP (Digital)" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Device" Identifier "Videocard1" Driver "vesa" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "DesktopSetup" "horizontal" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection

  Read the article

• mysql is not connecting after data directory change

  - by user123827

  I've changed data directory in /etc/my.cnf. datadir=/data/mysql socket=/data/mysql/mysql.sock I also moved mysql folder from /var/lib/mysql/ to /data/mysql Now when i connect to mysql i get following error: [root@youradstats-copy mysql]# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) also when i see /var/logs/msqld.log i get following messages in that: InnoDB: Setting log file /data/mysql/ib_logfile0 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 120704 7:43:31 InnoDB: Log file /data/mysql/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /data/mysql/ib_logfile1 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 InnoDB: Cannot initialize created log files because InnoDB: data files are corrupt, or new data files were InnoDB: created when the database was started previous InnoDB: time but the database was not shut down InnoDB: normally after that. 120704 7:43:36 [ERROR] Plugin 'InnoDB' init function returned error. 120704 7:43:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. I shut down mysql properly before doing these changes and then started it properly but dont know why getting these messages. please help to solve issue as i have changed socket path in my.cnf but still its pointing to old path...

  Read the article

• how do I create a new git repository with turnkey redmine?

  - by Ali Shafai

  I have downloaded the Turnkey's redmine VM and it's running finr (I can create new projects and wikis and document lists etc etc). only thing is I can't make it to use my new git repos. I found this link, but it didn't help. any help appreciated.

  Read the article

• How to copy remote machines text to local machines clipboard through SSH?

  - by recluze

  I work on a remote machine through ssh. I have a very large text file there (approx. 500 lines) which I usually need to modify, then copy the contents of that file and paste it in my local browser. The way I usually do this is cat filename and then select/copy the ssh output. That takes a lot of time. I was wondering if there is a utility that will put the remote file's contents in my local clipboard.

  Read the article

• Determine the time difference between two linux servers

  - by Paul

  I am troubleshooting a latency network issue on a network. It is probably a nic or cabling issue, but while I was going through the process of figuring it out, I was looking at the timings of a ping packet leaving a network card and arriving at another server. Both linux. So I have tcpdump running on both, and I issue a ping from one to the other, and back again, and looking at the timing differences might have shed light on where the latency is coming from. It is an academic exercise now, as I need to eliminate some more fundamental causes, but I was curious as to how this could be achieved. Given that ntpd is installed and running on two servers, how can I confirm the current time discrepency between the two servers, to whatever level of accuracy is possible - given that we are talking about latency on a local lan, which is ideally a millisecond or so. NTP itself is accurate to a couple of ms under good conditions, and as both servers are in the same environment, they should (presumably) achieve a similar level of accuracy, and so should have a time discrepency between them of a only few ms - but how can I check this?

  Read the article

• 2 nics. 2 Defaults Gateways

  - by andre.dias

  Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Have rTorrent to move .torrent files

  - by David Alvares

  I am running rTorrent 0.9.2 and have configured it to move completed torrents to a different folder with this configuration line: system.method.set_key = event.download.finished,move_complete,"d.set_directory=~/done/;execute=mv,-u,$d.get_base_path=,~/done/" This is working fine, but I would like it to also move the .torrent file that it creates (from a magnet link into the session directory) into this done directory with the same name as the torrent and a .torrent extension. I tried adding another cp command, but I can not seem to figure out which variable ($d.get_hash did not work) stores the torrent's hash (which is what the .torrent files are named in the session directory). Is there a way to do this with rTorrent, if so how?

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >