Search Results

Search found 32753 results on 1311 pages for 'row number'.

Page 323/1311 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

• LYNC 2010 Dial-In in Meeting DTMF issue

  - by user140116

  We are facing an issue in the LYNC2010 dial-in to a meeting. We redirect an Asterisk number to LYNC, whitch connects successfully in the dial-in plan of LYNC. After calling from external network to the given number, we hear LYNC aswering and prompting us to enter the PIN and afterwards the hash key. I should mention that all other dials to LYNC from Asterisk and vise versa are routed successfully. Also all DTMF we send to Asterisk from the phone (IVR, Extension, PIN etc) are routed also fine Afterwards we press the appropriate pin folowed by the hash keyand we get 'Sorry I can't find meeting with that number' Some pros mentioned that it might be dtmfmode=RFC2833 or dtmfmode=auto in Asterisk (All checked and tried). Some pros mentioned, that there is a problem in geeral in LYNC and DTMF (even with Cisco Call Manager). Some other pros mentioned that chack box 'Enable refer support' in Voice Routinh\Trunk Configuration' in LYNC has to be unchecked (Also tested). The problem stil remains and there is no way to enter a meeting room by dial-in. ANY idea would be appreciated!!!!!!!!

  Read the article

• Thunderbird: change selected email highlight color (when no focus)

  - by Rabarberski

  Is it possible to change, in the message list of Thunderbird 3.0, the highlight color of the selected message when the list does not have the focus? The highlight color for the selected row is blue when the list has the focus, this is very clear. But when the list does not have the focus (e.g. after when you click in the message preview area), the highlight color is dark grey. However, this dark grey doesn't really stand out against the alternating row highlighting in the list (at least not on my laptop's LCD screen), making it difficult for me to quickly locate the message I've selected. So, any way to change this dark grey highlighting?

  Read the article

• Is there a better way to do bonded vlan tagged interfaces with XEN

  - by AJ01

  We have a number of XEN servers all running CentOS or RHEL. The VM's that they run are all required to be on their own VLAN for no other reason than the customer expects them to be. Long story short however, I can't change this right now. We are also required to have bonding enabled on the interfaces. So to accommodat this we enslave eth1 and eth2 to bond0. We then create a seperate interface called bond0.VLANID where VLANID corresponds to the correct vlan; eg ifcfg-bond0.204 DEVICE=bond0.204 BOOTPROTO=static ONBOOT=yes VLAN=yes BRIDGE=xenvlan204 Bridge to XEN As you will see, we eventually have to bridge this out to XEN, and we do this by adding another interface called xenvlan204 (in this instance) which contains; ifcfg-xenvlan204 DEVICE=xenvlan204 BOOTPROTO=none ONBOOT=yes TYPE=bridge XEN Vm Config Finally in our XEN config for each VM, we add vif = [ "bridge=xenvlan204" ] This then allows the vm host to access that particular vlan The Problem We've noticed a few problems with this setup. One being that we currently create the interfaces manually. Which means if we add more vlan enabled interfaces and bridges we usually have to restart xend which is something I'm not so hot about. Also lower level staff have their heads melted by the number of interfaces and the risk of a mistake occurring is high. Secondly, it can take sometime for a host to come up if it has a number of vlan taged interfaces. Thirdly, its just not scaling well on the management aspects The Question Is there a better more flexible way to do this (in particular with Xen that ships with centos 5.3, 5.4 and 5.5 as we have to support all three) that leverages either scripting or other solutions to allow an arbitrary amount of interfaces to be created when a vm is instanced. Your advise and expertise is more that welcomed.

  Read the article

• Dir all files to output.log, including message "File Not Found"

  - by user316687

  I'm trying to dir a bunch of files with dos command: dir My dir.bat file: dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" The second one doesn't exist. Then, when running my bat: C:\myuser>E:\dir.bat > output.log I open output.log and don't find any message about the file that was not found. Output.log : E:\documentos>dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\57\Asiento\01 20/12/2005 06:41 p.m. 40,960 Asiento 3 Modificacion de Estatuto.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,155,328 bytes free E:\documentos>dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\134\Asiento\01 E:\documentos>dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\55\Asiento\01 08/08/2007 08:33 a.m. 40,960 Asiento 5 Padron de Afiliados Segunda Entrega.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,151,232 bytes free Is there any way that output.log shows "File Not Found" message?

  Read the article

• Device CAL, User Cal or Processor license needed for SQL 2008 (architecture explained inside)?

  - by nycgags

  So we have a number of servers in the Amazon cloud running SQL Server Standard edition to aggregate data. For that purpose we are fine, the licensing is handled by our contract with Amazon, no problem there. For the beefier work, we want to install Enterprise Edition (EE) on our servers processing raw data so that we can take advantage of table partitioning. We currently have 3 servers aggregating data from about 40 node servers, all 43 of these servers are running standard edition which is fine. We also have 4 servers running standard processing the raw data, but I think we can get away with 2 (for redundancy) running Enterprise Edition. We have 2-3 dba's that access these DW servers for maintenance (using the same windows login via remote desktop). So visually: 40 -- 3 -- [2] -- 2 -- 1 nodes -- aggregators -- raw (which we want to run EE) -- calculators -- datawarehouse Nodes PUSH to aggregators, Raws PULL from aggregators, Calculators PULL from Raw, Calculators PUSH to datwarehouse I am specifying the push vs. pull in case that changes how the # of licenses is calculated. Q1) how many device (or user) CAL's do we need? Q2) do I need to speak with someone from MSFT to find out if it is ok to install in the Amazon Cloud (Amazon said we need to verify it is ok in our license terms)? Q3) what happens if another device tries to access a server with the limited number of device CAL's? Q4) Are the device CAL's simultaneous number of devices or total? Q5) Do Device and User CAL's cost the same or is there a difference? Q6) Would we need to buy a processor license (we are hoping not to)?

  Read the article

• Thunderbird: possible to change selected email highlight color (when no focus) ?

  - by Rabarberski

  Is it possible to change, in the message list of Thunderbird 3.0, the highlight color of the selected message when the list does not have the focus? The highlight color for the selected row is blue when the list has the focus, this is very clear. But when the list does not have the focus (e.g. after when you click in the message preview area), the highlight color is dark grey. However, this dark grey doesn't really stand out against the alternating row highlighting in the list (at least not on my laptop's LCD screen), making it difficult for me to quickly locate the message I've selected. So, any way to change this dark grey highlighting?

  Read the article

• replace set of integers with respective string values

  - by Tripz

  I have a query which return the output like -- 5,4,6 Where 1 = apple, 2 = mango, 3 = banana, 4 = plum, 5 = cherry, 6 = kiwi etc. I would like to update my output as cherry,plum,kiwi instead of 5,4,6 How can I achieve that in the same select statment. I am okay to hard code the values. Please confirm May be I did explain clearly Here is the sample SELECT fruits FROM t_fruitid where id = 7 is returning me '5,6,4' as a single row Now I want to update this single row output as 'cherry,plum,kiwi' How do I do this Thanku

  Read the article

• Removing a device in "removed" state from Linux software RAID array

  - by Sahasranaman MS

  My workstation has two disks(/dev/sd[ab]), both with similar partitioning. /dev/sdb failed, and cat /proc/mdstat stopped showing the second sdb partition. I ran mdadm --fail and mdadm --remove for all partitions from the failed disk on the arrays that use them, although all such commands failed with mdadm: set device faulty failed for /dev/sdb2: No such device mdadm: hot remove failed for /dev/sdb2: No such device or address Then I hot swapped the failed disk, partitioned the new disk and added the partitions to the respective arrays. All arrays got rebuilt properly except one, because in /dev/md2, the failed disk doesn't seem to have been removed from the array properly. Because of this, the new partition keeps getting added as a spare to the partition, and its status remains degraded. Here's what mdadm --detail /dev/md2 shows: [root@ldmohanr ~]# mdadm --detail /dev/md2 /dev/md2: Version : 1.1 Creation Time : Tue Dec 27 22:55:14 2011 Raid Level : raid1 Array Size : 52427708 (50.00 GiB 53.69 GB) Used Dev Size : 52427708 (50.00 GiB 53.69 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Nov 23 14:59:56 2012 State : active, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : ldmohanr.net:2 (local to host ldmohanr.net) UUID : 4483f95d:e485207a:b43c9af2:c37c6df1 Events : 5912611 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 1 removed 2 8 18 - spare /dev/sdb2 To remove a disk, mdadm needs a device filename, which was /dev/sdb2 originally, but that no longer refers to device number 1. I need help with removing device number 1 with 'removed' status and making /dev/sdb2 active.

  Read the article

• Transfer some information from 1 workbook to another plus 1

  - by Cheryl

  I have 1 workbook with 4 sheets. Some of the information is auto entered from 1 sheet to another. I do not save when closing out. It is entered, printed and deleted. I need to get some of the information off those sheets to a seperate workbook that I save. Example: worksheet 1 info Name dob reason etc I am wondering if I can transfer that information to another sheet to be entered on row one and then the next one on row 2 and so on. Since I do not save the first workbook, will this work?

  Read the article

• Excel VBA Function runtime error 1004: Application-defined or object-defined error

  - by music2myear

  I'm trying to learn functions for the purpose of simplifying and reusing code whenever necessary. I began by turning something I use pretty often into a function: Returning the integer value of the last non-blank row in a spreadsheet. Function FindLastDataLine(strColName As String) As Long FindLastDataLine = Range(strColName).Offset(Rows.Count - 1, 0).End(xlUp).Row End Function Sub PracticeMacro() intItemCount = FindLastDataLine("A:A") MsgBox ("There are " & intItemCount & " rows of data in column A.") End Sub When I run this I recieve the runtime error '1004' "Application-defined or object-defined error" which Help helpfully defines as "someone else's fault" to quote not quite verbatim. Where might I be going wrong?

  Read the article

• Possible disk IO issue

  - by Tim Meers

  I've been trying to really figure out what my IOPS are on my DB server array and see if it's just too much. The array is four 72.6gb 15k rpm drives in RAID 5. To calculate IOPS for RAID 5 the following formula is used: (reads + (4 * Writes)) / Number of disks = total IOPS. The formula is from MSDN. I also want to calculate the Avg Queue Length but I'm not sure where they are getting the formula from, but i think it reads on that page as avg que length/number of disks = actual queue. To populate that formula I used the perfmon to gather the needed information. I came up with this, under normal production load: (873.982 + (4 * 28.999)) / 4 = 247.495. Also the disk queue lengh of 14.454/4 = 3.614. So to the question, am I wrong in thinking this array has a very high disk IO? Edit I got the chance to review it again this morning under normal/high load. This time with even bigger numbers and IOPS in excess of 600 for about 5 minutes then it died down again. But I also took a look at the Avg sec/Transfer, %Disk Time, and %Idle Time. These number were taken when the reads/writes per sec were only 332.997/17.999 respectively. %Disk Time: 219.436 %Idle Time: 0.300 Avg Disk Queue Length: 2.194 Avg Disk sec/Transfer: 0.006 Pages/sec: 2927.802 % Processor Time: 21.877 Edit (again) Looks like I have that issue solved. Thanks for the help. Also for a pretty slick parser I found this: http://pal.codeplex.com/ It works pretty well for breaking down the data into something usable.

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

• How to clear contents of cell in Excel?

  - by Ken

  I've been sent an Excel spreadsheet with a weird first row. Some of the cells say "Column1", "Column2", etc., but I can't delete their contents. If I select the cell and hit backspace, it goes blank, but when I press return, it goes right back to saying "Column1". I found another answer here that suggested this could be caused by "Cell validation", but the validation window says "Any value", and also "show alert" (and I'm not seeing an alert), so I don't think that's it. The first row is white text on a blue background, if that means anything. The spreadsheet was sent to me in XLSX format, but I tried resaving as XLS and opening that, and it seems to make no difference. This is with the "ribbon" version of Excel (they got rid of the Help menu so I don't know how to see what version number it is!). Thanks!

  Read the article

• Pivot Table from data with merged cells

  - by Graeme

  I have a energy spreadsheet for multiple sites. the first row has month and year. the next row has columns for date invoice received, KW hours and cost. So there are three columns for each month. I have merged the month cell across the three columns. When i create a pivot table the date kw/h and costs are labled date1, date2, etc. Can I link the months headings to the subheadings to get meaningful headings in the pivot table????

  Read the article

• How to connect AD Explorer from Sysinternals to Global Catalog

  - by Oliver

  I'm using the sysinternals AD Explorer quite frequently to search and inspect an Active Directory without any big problems. But now i'd like to connect not only to a single AD Server. Instead i like to inspect the global catalog. If i enter within the AD Explorer connect dialog only the dns name of the machine (e.g. dns.to.domain.controller) that is serving the global catalog i only receive the concrete domain for which it is responsible, but not the whole forest (that's normal behaviour and expected by me). If i'm going to add the default port number (3268) for the global catalog in the form dns.to.domain.controller:3268 AD Explorer will simply crash without any further message. The global catalog itself works as expected under the given name and port number, cause our apache server use exactly this address and port number to authenticate some users. So any hints or tips to access the global catalog out of AD Explorer? Or there are any other nice tools like AD Explorer out there that doesn't have any problems to access the global catalog?

  Read the article

• How can I stop Excel from eating my delicious CSV files and excreting useless data?

  - by atroon

  I have a database which tracks sales of widgets by serial number. Users enter purchaser data and quantity, and scan each widget into a custom client program. They then finalize the order. This all works flawlessly. Some customers want an Excel-compatible spreadsheet of the widgets they have purchased. We generate this with a PHP script which queries the database and outputs the result as a CSV with the store name and associated data. This works perfectly well too. When opened in a text editor such as Notepad or vi, the file looks like this: "Account Number","Store Name","S1","S2","S3","Widget Type","Date" "4173","SpeedyCorp","268435459705526269","","268435459705526269","848 Model Widget","2011-01-17" As you can see, the serial numbers are present (in this case twice, not all secondary serials are the same) and are long strings of numbers. When this file is opened in Excel, the result becomes: Account Number Store Name S1 S2 S3 Widget Type Date 4173 SpeedyCorp 2.68435E+17 2.68435E+17 848 Model Widget 2011-01-17 As you may have observed, the serial numbers are enclosed by double quotes. Excel does not seem to respect text qualifiers in .csv files. When importing these files into Access, we have zero difficulty. When opening them as text, no trouble at all. But Excel, without fail, converts these files into useless garbage. Trying to instruct end users in the art of opening a CSV file with a non-default application is becoming, shall we say, tiresome. Is there hope? Is there a setting I've been unable to find? This seems to be the case with Excel 2003, 2007, and 2010.

  Read the article

• when to upgrade server to include more cores, versus more processors, versus additional server?

  - by gkdsp

  The server hosting market is separated into single, double, qual, etc., processors, where each processor has several cores, or CPUs. My company will offer a Linux-based web application that relies on an Apache web server and a middle tier for business logic. The middle tier is used to crunch math, and return result to a client. Many clients may access the application simultaneously. The company will start with one processor having 4 cores. I'm trying to understand how the app uses the cores and then how to scale the application as business grows, in terms of servers/processors/cores. For example, I'd assume initially one core would be used for Apache, and the other 3 used to process client's requests for math crunching... Question 1: does that mean, with the 3 cores available, I can handle 3 separate client requests simultaneously (e.g. 1 for each of 3 cores)? I mean, except for the shared RAM, is this effectively like having 3 individual machines (from pt of view or processing client requests simulaneously)? Or, only one client's request may be processed at any one time, but that client's request is divided up into up to 3 cores depending on the type of process running that does the math crunching and whether or not it can take advantage of multi threading (so the # of cores impacts how fast any one client request completes)? I'm confused about what the cores mean to the application here. Question 2: As the business grows and more client requests need to be processed, should the server be upgraded to (A) a new machine with more cores, (B) a new machine with two processors, 4 cores each, or (C) keep the original server and add another server with a single processor? Which route provides the most efficient way to scale the application, in terms of processing more client requests per time interval? Is the choice, for example, limited by RAM (when you need more RAM than box can handle it's time to add another server), or something else? Question 3: Is the total number of client requests processed simultaneously equal to the number of cores times the number of servers (minus the one core for Apache)?

  Read the article

• Enterprise Redirection Services?

  - by Aaron Alton

  This is probably a case of "if I new what it was called, I could google it in 5 minutes" - but I don't know what it's called. It's probably best to explain the requirement using an example. We have a number of services (vpn, owa, etc) which we host from one of our datacenters. We have a number of datacenters, and we technically have the infrastructure already in place to support these services at a number of our datacenters. To provide access to these "services", I would create an external DNS entry (ex. VPN.MyCompany.com Gateway IP for one of my DCs), and clients will connect to it via the DNS entry. Since I have multiple datacenters that can support this service, I could theoretically offer a "highly available, geographically dispersed" solution if I could point this DNS entry to some sort of third party who offers highly available "redirection" services. If my primary site goes down, I could just make a change via some management console and configure the redirector to point to a different DC. Of course, it would be fairly straightforward to set this sort of thing up on one of our servers, but that would kinda defeat the purpose of a highly available third party. Is anyone familiar with a service like this? I'm thinking something like DynDNS, but with Enterprise availability guarantees.

  Read the article

• PostgreSQL, update existing rows with pg_restore

  - by woky

  Hello. I need to sync two PostgreSQL databases (some tables from development db to production db) sometimes. So I came up with this script: [...] pg_dump -a -F tar -t table1 -t table2 -U user1 dbname1 | \ pg_restore -a -U user2 -d dbname2 [...] The problem is that this works just for newly added rows. When I edit non-PK column I get constraint error and row isn't updated. For each dumped row I need to check if it exists in destination database (by PK) and if so delete it before INSERT/COPY. Thanks for your advice. (Previously posted on stackoverflow.com, but IMHO this is better place for this question).

  Read the article

• How do I remove the text from the bookmarks strip in Chrome?

  - by joshcomley

  The title says it all really, but to give further indication, see the image below: All I really want is a row of favicons!

  Read the article

• hi, beginner issue with socat [closed]

  - by ams

  the main question is how to begin sending request to server with some data(send request with number) and get data from server?? and second question is how can i solve this simple question (author said) ? In this part, you should write a simple Shell script which receives URL of a website by sending your student number to a server and after creating and sending HTTP request for this URL, receives the desired content. Finally the content should be saved in an HTML file. Steps 1. Connect to port 4000 of the server and send the massage which includes your student number (e.g. 89207704) to the server. Receive the URL in the form of http://www.example.com. Create the HTTP request and send it to the website's server. Receive the content of the URL from the website. Save the content in the HTML file. what i can do? how i begin? thank u all the topology that exercise is speaking about is here Topology is here Is there any easy way to do this?

  Read the article

• How to search file for matching whole lines?

  - by WilliamKF

  I have a command which sends to stdout a series of numbers, each on a new line. I need to determine whether a particular number exists in the list. The match needs to be exact, not a subset. For example, a simple way to approach this that does not work would be to do: /run/command/outputing/numbers | grep -c <numberToSearch> My this gives a false positive on the following list when searching for '456': 1234567 98765 23 1771 If the count is non-zero, a match was found or if it was zero, the number is not in the list. The issue with this is that the numberToSearch could match a subsequence of numbers on a line, instead I only want hits on the whole line. I looked at the man page for grep and did not see any way to only match whole lines. Is there a way to do this, or would I be better off using awk or sed or some other tool instead? I need a binary answer as to whether the number being search for is present or not.

  Read the article

• Traspose matrix-style table to 3 columns in Excel

  - by polarbear2k

  I have a matrix-style table in excel where B1:Z1 are column headings and A2:A99 are row headings. I would like to convert this table to a 3 column table (column heading, row heading, cell value). It does not matter in what order the new table is. A B C D A B C A B C 1 H1 H2 H3 1 H1 R1 V1 1 H1 R1 V1 2 R1 V1 V2 V3 => 2 H1 R2 V4 or 2 H2 R1 V2 3 R2 V4 V5 V6 3 H1 R3 V7 3 H3 R1 V3 4 R3 V7 V8 V9 4 H2 R1 V2 4 H1 R2 V4 5 H2 R2 V5 5 H2 R2 V5 6 H2 R3 V8 6 H3 R2 V6 7 H3 R1 V3 7 H1 R3 V7 8 H3 R2 V6 8 H2 R3 V8 9 H3 R3 V9 9 H3 R3 V8 I've been playing around with the OFFSET function to create the whole table but I feel like a combination of TRANSPOSE and V/HLOOKUP is required. Thanks

  Read the article

• How to delete removed devices from a mdadm RAID1?

  - by Kabuto

  I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

  Read the article

• Is it possible to have a cell in table1 "point to" a cell in table2?

  - by Lewray

  I have a hierarchical structure in a database driven software application. Each row in parentTable 'owns' a number of rows in childTable. If the childTable does not have a value set in columnA then it should return the value specified in the appropriate row of parentTable columnB. Is it possible to implement a pointer or cell reference somehow so that I do not have to copy values from parent to child. (A change in parent could result in a large number of changes in child). If this is not possible, could anyone suggest a different approach?

  Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >