Search Results

Search found 14092 results on 564 pages for 'video tutorial'.

Page 323/564 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • mplayer audio desync

    - by geek
    I have and avi file and an ac3 file that contains an alternate audio stream. I run mplayer like: mplayer -audiofile foo.ac3 bar.avi mplayer takes the audio stream from the ac3 file as expected, but when I try to scroll the video using arrows or pgup/pgdown keys, the audio gets desynced: mplayer just starts playing the audio stream from the beginning. Do I have to pass any additional command line arguments in order to make it scroll properly without desyncing audio?

    Read the article

  • How Can I install UPNP on My System?

    - by Subhen
    Hi, I am completely new with UPNP but I have developed an application which get the XML response from MediaFlu Server (UPnp) and list the Music , Video and Images and plays as per request. Now , I just want to know If I want to set up my UPnp Server on my windows machine (If Feasible) how could I do that? Thanks, Subhen

    Read the article

  • Virtual DVD writer

    - by AngryHacker
    Hi, my laptop does not have a DVD driver at all. But I'd like to convert my video to a DVD format (e.g. Video_TS and Audio_TS). Is there a Virtual DVD writer out there that can pretend to be a DVD+R or DVD-R or DVD-RW drive?

    Read the article

  • How to create a RTMP server on linux (Gentoo)

    - by user221359
    I am trying to create a RTMP server to stream video files from my Linux server to the internet/network. I have been able to successfully use ffmpeg to stream to other RTMP servers like youtube, but how do I go about hosting my own on my RTMP server locally? I have tried looking into ffserver, but is this what I need to create a local RTMP server? If so could someone give me basic syntax or examples to get it working? Thanks for any information.

    Read the article

  • Router has traffic coming in, but it's not going anywhere. What can I do?

    - by dubRun
    Ok so I have a Linksys WRT-54G v4 running the latest version of DD-WRT (just downloaded it last week to try to fix the problem) There is consistently about 750kbs coming into the router but from what I can tell, it's not going anywhere inside the LAN or WLAN. I'm also having alot of network dropouts while I'm listening to music or watching video over the network. The traffic is coming in even if there are no computers on the network (turned them all off) What can I do to fix this problem? Here is a screenshot:

    Read the article

  • Splitting coax cable for PC tuner

    - by TheLakersHighlights
    I have an HDTV connected with HDMI from a DISH Network VIP612 DVR Receiver. I want to split the coaxial connection from the DVR to my Hauppauge 1200 WinTV HVR-850 HDTV Tuner Stick. What splitter and coaxial cable (needs to transmit audio and video) should I get to make this a watchable TV on my computer?

    Read the article

  • Eyefinity resolution on third monitor

    - by Sam2299
    I'm now using three monitors with resolution capability of 1920x1080. The one monitor connected to Active Display Port is (from some reason) limited to 1440x900. Is there a way to increase the resolution of the third monitor to have all three at 1920X1080? My machine: Graphics card - AMD 5770 Processor - Intel Core i7-2600 Ram - 8GB OS - Windows 7 64bit. VGC(Video Graphics Controller) driver is up to date. Got this message:

    Read the article

  • does bootcamp provide the best drivers for windows 7, or should i install the ones windows 7 suggest

    - by hatorade
    I'm running windows 7 via bootcamp on my MBP (the model that was newest in summer 2009). Bootcamp is up to date. Windows 7 just suggested I install a new driver for my nvidia card. However, I was under the impression bootcamp provided the most optimal drivers for windows 7 to run on my MBP's hardware. Should I stick with what bootcamp gives for my video driver, or update to the one windows 7 suggests?

    Read the article

  • How to use eyefinity

    - by jasondavis
    I keep hearing the term eyefinity. Can someone explain how to achieve eyefinity? I have 3-4 monitors, what else is needed for this? Just a video card or 2 or is there more to it?

    Read the article

  • Ubuntu vs Kubuntu: The closest Windows experience

    - by Leonardo
    For an experienced Windows user wanting to start experimenting with Linux, which distro provides the closest Windows experience? Assuming the use cases enumerated below: Web browsing Working with Office 2003/2007 documents File indexing (desktop search) Basic Sql Server 2005 database administration Media playback(MP3, M4P, WMV, WMA, dvds, etc) Windows Live instant messaging Skype calls/video calls Organizing millions of files FTP/SFTP, SSH, telnet automation

    Read the article

  • A faulty Caviar Blue hard drive?

    - by Glister
    We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

    Read the article

  • DisplayPort -> DVI Adapter, Active or Passive?

    - by Aren B
    I read somewhere that you only need an active adapter (usb powered) if you want resolutions greater than 1920x1200. I also heard from someone that you need it when running triple-monitor because more than two displays drains too much power. So to connect a 3rd monitor @ 1920x1200 to my video card's DisplayPort Port, do I need to spend the extra $100 and buy the active adapter?

    Read the article

  • Weird random application hang problem

    - by haridsv
    I am trying to understand an application hang problem that started up lately on my windows xp system. The system runs fine for days (sometimes) without ever shutting down or putting it to sleep, but the problem first shows up as one of the apps hanging. The application's UI stops responding or one or more background threads hang, so even though the GUI is responding, it is not doing anything (e.g., in VirtualDub's case, the UI responds fine, but the job doesn't progress and I won't even be able to abort it). The weirdness part comes from the fact that if I try to kill such an app, the program that is used to kill it goes into the same mode (i.e, that hangs instead of the original). E.g., if I use Process Explorer to kill it, the original program exits, but procexp now hangs. If I use another instance of procexp to kill the one that is hanging, this repeats, so there is always at least one program hanging in that state. This is not specific to procexp, I tried the native task manager and even the "End Process" dialog from windows explorer that shows up when you try to close a non-responsive GUI (in this case, the explorer itself hangs). The only program that didn't hang after the kill, is the command line taskkill. However, in this case, explorer hangs instead of taskkill. Also, once this problem starts manifesting, it soon ends up freezing the whole system to the extent that even a clean shutdown is not possible, so I have learned to reboot as soon as I notice this problem, however this is very inconvenient, as I often have encoding batch jobs going on which can't continue the job after the restart. The longer I leave the system running after seeing this problem, the more applications get into this state. I have tried to do a repair install but that didn't make any difference. I also uninstalled some of the newer installs, but again no difference. I tried to search online, but got inundating results for generic hang and crash related problems. Though I couldn't notice any pattern, it seems as though the problem is more frequent if I have some video encoding going on at that time. I had the system running for days when I only do browsing and internet audio/video chat before I decide to start encoding something and the problem starts to show up. I am not too sure if it is the encoding program that first hangs, though I almost always noticed that too hanging (like the VirtualDub stopping to make progress). I also had to reboot 3 times on one day when I was heavily experimenting with encoding. I would appreciate any help in narrowing down this problem and save me the trouble of reinstalling. I don't especially want to loose my gotd installs.

    Read the article

  • How to record screencast on Linux with mouse clicks and key hits shown

    - by zalun
    Basically I'm looking for an application. I know it's slightly off topic, but I'm looking for it to record a series of tutorials for a program I wrote. It's important to show the actions like mouse click, mouse right click, and all what's coming out from the keyboard. In the similar way to this video http://www.flickr.com/photos/jannis/3246408003/ which is made using OSX and ScreenFlick http://www.araelium.com/screenflick/ Is there such an option? Thanks

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

    - by Beres Botond
    I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • RAID 50 24Port Fast Writes Slow Reads - Ubuntu

    - by James
    What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

    Read the article

  • How do you use 4GB of RAM?

    - by Xeoncross
    I have a Quad Core Intel PC with 4GB of RAM - I've been using it over a year to run web server stress tests (ab.exe -n 5000 -c 500), encode HD video, play games, open hundreds of tabs in multiple browsers (simultaneously), worked on multi-layered +8000px art in photoshop and just about every other thing you can think of. As of yet I've never passed 2.3GB of RAM usage. How in the world do you use all 4GB? Is there any use for it?

    Read the article

  • Handbrake --stop-at parameter not working as intended

    - by KG
    Hey all, I run the following from command line: handbrakeCLI.exe -i SourceFile.mkv -o OutputFile.mkv --stop-at 120 According to the CLIGuide you can supply the --stop-at value as seconds (which is what I want, stop encoding 120 seconds into the file). My purpose for this is to quickly create a very high quality video clip from a full movie for testing other encoding processes. However, when I view my output file it is the entire movie. Any ideas?

    Read the article

  • Control mouse with keyboard in Ubuntu

    - by WishCow
    I'm looking for a program that I can use to control the mouse from the keyboard. I think a video can explain it much better that I could, so please check out Mouser from lifehacker.com: http://lifehacker.com/212816/hack-attack-operate-your-mouse-with-your-keyboard Unfortunately, it's only for Windows, but something this would be the perfect solution. I found a lot of help on mapping keys to programs, but nothing about mapping keys to mouse control.

    Read the article

  • Problem with UBUNTU 10.4 and ATI

    - by Maximilinao
    Hi, I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot UBUNTU. What I can do?. Sorry for my English. I used the google translator

    Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >