Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 324/609 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

  • How to start vim without executing /etc/vimrc?

    - by florin
    On my Linux server at work, the admins did not install cscope, and I installed it from source in my home directory and added it to the $PATH. The trouble is, the /etc/vimrc has a reference to /usr/bin/cscope which does not exist and everytime I start vim, it complains about that and I have to press for that message to go away. It is interesting that if I remove cscope from my $PATH, I don't get that behavior - so it is possible that vim is testing that cscope exists somewhere, and only then executing the cscope configuration - but then it gets it wrong! So my question is: can I set something up in my .vimrc so it does not source the global /etc/vimrc? I don't want to move cscope out of PATH, as I don't want to type the full directory name every time I run it from the command line.

    Read the article

  • Windows 2008 terminal server - How to restrict access to DVD/floppy?

    - by test1839
    I has a very simple task. I need to block access to removable media (CD, DVD, floppy, USB drives etc.) on a Windows 2008 R2 Terminal Server for users and allow it for admins. I tried to enable the following policy in GPO: User Configuration/Administrative Templates/System/Removable Storage Access All Removable Storage classes: Deny all access = Enabled But it did not work. I tried different physical and virtual 2008 servers with the same result. It works on Windows 7 but not on Windows 2008. Has anyone had success with this parameter on Windows 2008? Thank you

    Read the article

  • SFTP is not connecting to remote server

    - by Crono15
    $ sftp -vvv Remote_IP Connecting to Remote_IP... OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to Remote_IP [Remote_IP] port 22. debug1: connect to address Remote_IP port 22: Operation timed out ssh: connect to host Remote_IP port 22: Operation timed out Connection closed I set up an account for SFTP only access with a chroot. I tested that on the server and it works fine. The problem is, I could not get remote SFTP access to the server to work right. The example above is what I keep on running into. I have been trying to figure out how to solve this problem for 2 days now. I am not sure if it have to do with /etc/ssh/sshd_config. Is it something that I am not aware of? I am hoping that you could help point me to the right place for this issue.

    Read the article

  • dhcpd: varying vendor-class-identifier

    - by jessicah
    I'm having trouble selectively sending parameters in response to a DHCP Inform packet using groups (or even without, just using host declarations) for bootp stuff. My configuration file right now looks like: subnet 130.123.131.128 netmask 255.255.255.128 { allow unknown-clients; } host dev-mac-09 { option vendor-class-identifier "example-identifier"; hardware ethernet 10:9a:dd:51:ff:83; } If I put vendor-class-identifier in the global scope, using tcpdump I can see that the client receives the vendor class option successfully. If I take it out, and just keep it in the host scope (or group scope), the client never receives the option. Specifying option dhcp-parameter-request list 60 doesn't help either. I did try using a class definition inside a group, but then it applied even if the host wasn't a part of the group. As an aside, how do I get detailed logging? At least something to indicate what groups and things got used to generate the response to the client.

    Read the article

  • Why doesn't Gradle include transitive dependencies in compile / runtime classpath?

    - by Francis Toth
    I'm learning how Gradle works, and I can't understand how it resolves a project transitive dependencies. For now, I have two projects : projectA : which has a couple of dependencies on external libraries projectB : which has only one dependency on projectA No matter how I try, when I build projectB, gradle doesn't include any projectA dependencies (X and Y) in projectB's compile or runtime classpath. I've only managed to make it work by including projectA's dependencies in projectB's build script, which, in my opinion does not make any sense. These dependencies should be automatically attached to projectB. I'm pretty sure I'm missing something but I can't figure out what. I've read about "lib dependencies", but it seems to apply only to local projects like described here, not on external dependencies. Here is the build.gradle I use in the root project (the one that contains both projectA and projectB) : buildscript { repositories { mavenCentral() } dependencies { classpath 'com.android.tools.build:gradle:0.3' } } subprojects { apply plugin: 'java' apply plugin: 'idea' group = 'com.company' repositories { mavenCentral() add(new org.apache.ivy.plugins.resolver.SshResolver()) { name = 'customRepo' addIvyPattern "ssh://.../repository/[organization]/[module]/[revision]/[module].xml" addArtifactPattern "ssh://.../[organization]/[module]/[revision]/[module](-[classifier]).[ext]" } } sourceSets { main { java { srcDir 'src/' } } } idea.module { downloadSources = true } // task that create sources jar task sourceJar(type: Jar) { from sourceSets.main.java classifier 'sources' } // Publishing configuration uploadArchives { repositories { add project.repositories.customRepo } } artifacts { archives(sourceJar) { name "$name-sources" type 'source' builtBy sourceJar } } } This one concerns projectA only : version = '1.0' dependencies { compile 'com.company:X:1.0' compile 'com.company:B:1.0' } And this is the one used by projectB : version = '1.0' dependencies { compile ('com.company:projectA:1.0') { transitive = true } } Thank you in advance for any help, and please, apologize me for my bad English.

    Read the article

  • links for 2010-05-10

    - by Bob Rhubart
    Announcing the MOS WCI "Community" (World of WebCenter Interaction) In this community you'll find a product related discussion forum moderated by Oracle WebCenter Interaction support engineers, recommended tips and tricks, links to knowledge base articles and best practices for setting up and administering up your environment. We hope you'll take a minute to have a look through the community. (tags: oracle otn webcenter enterprise2.0) Jason Williamson: Tuxedo Runtime for CICS and Batch Webcast "The notion that mainframes can be rehosted on open system is pretty well accepted. There are still some hold out CxO's who don't believe it, but those guys typically are not really looking to migrate anyway and don't take an honest look at the case studies, history and TPC reports." Jason Williamson (tags: oracle otn entarch tuxedo) Tom Hofte: Analyzing Out-Of-Memory issues in WebLogic 10.3.3 with JRockit 4.0 Flight Recorder Tom Hofte shows you "how to capture automatically an overall WLS system image, including a JFR image, after an out-of-memory (OOM) exception has occured in the JVM hosting WLS 10.3.3." (tags: oracle otn weblogic soa java) Install Control Center Agent on Oracle Application Server (Oracle Warehouse Builder (OWB) Weblog) Qianqian Wu show you how to Install and Configure the Application Server; Deploy the Control Center Agent to the Application Server; Optional Configuration Tasks (tags: oracle otn bi datawarehousing) Frank Buytendijk: BI and EPM Landscape "Organizations are getting more serious about ecosystem thinking. They do not evaluate single tools anymore for different application areas, but buy into a complete ecosystem of hardware, software and services. The best ecosystem is the one that offers the most options, in environments where the uncertainty is high and investments are hard to reverse. The key to successfully managing such an environment is middleware, and BI and EPM become increasingly middleware intensive. In fact, given the horizontal nature of BI and EPM, sitting on top of all business functions and applications, you could call them 'upperware.'" -- Frank Buytendijk (tags: oracle otn enterprisearchitecture bi)

    Read the article

  • Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

    - by Bob
    I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

    Read the article

  • how to pass traffic for port 80 not through openvpn?

    - by moti
    Is there a way to configure OpenVPN clients to route traffic for HTTP port 80 and HTTPS port 443 directly (i.e. not through the VPN), but through the regular default gateway the clients have. All other traffic should go through the VPN. My client is running OpenVPN on Windows and my current configuration looks like this: client dev tun proto tcp remote my-server-2 1194 resolv-retry infinite nobind persist-key persist-tun ca ../keys/ca.crt cert ../keys/client1.crt key ../keys/client1.key ns-cert-type server verb 3 route-metric 1 show-net-up dhcp-renew dhcp-release route-delay 0 120 hand-window 180 management localhost 13010 management-hold management-query-passwords management-forget-disconnect management-signal auth-user-pass

    Read the article

  • Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

    - by Jazz
    I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

    Read the article

  • DELETE method not working in Apache 2.4

    - by Xavi
    I'm running Apache 2.4 locally and dealing with RESTful services authenticating through OAuth. GET, PUT and POST work fine but I can't get DELETE to work. I've tried installing WebDAV and mod_dav, overriding methods in .htaccess, tried Limits, force (enable) DELETE options in configuration and pretty much everything I've found in Google and StackExchange. Here's a copy of my .htaccess right now: <IfModule mod_rewrite.c> Header add Access-Control-Allow-Origin: * Header add Access-Control-Allow-Headers: Authorization Header add Access-Control-Allow-Headers: X-Requested-With Header add Access-Control-Request-Method: HEAD Header add Access-Control-Request-Method: GET Header add Access-Control-Request-Method: PUT Header add Access-Control-Request-Method: DELETE Header add Access-Control-Request-Method: OPTIONS Options +FollowSymlinks Options -Indexes RewriteEngine on RewriteRule ^(.*)\.* index.php [NC,L] </IfModule> Chrome's console shows: XMLHttpRequest cannot load http://dev.server.com/cars/favourite/. Method DELETE is not allowed by Access-Control-Allow-Methods. Is there anything I am missing?

    Read the article

  • m23 vs webmin vs landscape vs whatever you can propose, I need software to mantain a bunch of debian

    - by marc.riera
    Hello, I know there is landscape from canonical, but it has some $$ costs. Als there is webmin, and it can be used as a cluster management tool. Also there is m23, probably the most usable and interesting peace of manager software. But, what would you suggest to install and use on following configuration: 1) 100 desktop users, against an AD with quest authentication services installed. (ubunt8.04,9.04,9.10,10.04) 2) 50 servers (debian sid, lenny , ubuntu 8.04 and 10.04) We work on different software, so each group of persons need different configurations, each server has different pourposses, nothing is clusterized. And we have a good enough backup software. So , my objectives are: - easy install (deploy) - good reporting - easy logonscripts for users - easy bootupscripts for servers Thanks all for reading, and more thanks for your time. Marc

    Read the article

  • Is 850W SMPS enough for the below Config?

    - by bali208
    We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

    Read the article

  • Which IMAP flags are reliably supported across most mail servers?

    - by Ben Butler-Cole
    I am writing an application which reacts to emails sent to a mailbox. It retrieves the emails via IMAP. It will be deployed to a number of systems where I do not control the mail server configuration. I would like to use IMAP flags to indicate which messages have been handled. Are the system flags sufficiently widely supported that I can reasonably depend on them in my application? Are user-defined flags sufficiently widely supported? (If the answer is "ha ha, not a chance", then I shall use folders instead.) Thanks -Ben

    Read the article

  • Can /etc/hosts.deny/allow be overridden?

    - by Tar
    I have security measures put in place to keep unwanted users out of my server. I've changed the SSH port, disabled root login, have a software firewall to block portscans, and have entries in hosts.deny and hosts.allow. I have various services denied to all but another server of mine should my IP change, and two other administrators + my own IP address. My question is, can hosts.deny/allow configuration be overridden so that they can gain access to my server? Does using chroot jail for running things like an IRC server and Teamspeak server prevent people from gaining access to my server and screwing with it?

    Read the article

  • When Citrix desktop disconnects SAP Client holds session and can't log back in

    - by Stradas
    We have a fairly large Citrix implementation and have just pushed out SAP desktop client to all of the desktops. Everything else is working fine except the following problem: If a user Disconnects their session and the session is running the SAP client, (logging off works fine) the user can not reconnect and log back in. We have a script on the server that terminates the session as a work around. We can see on the server that it is the SAP client that is holding on and running. This is at a large office, but the SAP servers are in another hemisphere. As is the custom Citrix says its SAP and SAP says it is Citrix. I don't like using a powershell script as a substitute for a system configuration solution.

    Read the article

  • I am unable to find login page for phpmyadmin

    - by Awan
    I was using phpmyadmin(in Wamp) without a password for root. I thought to set a password for root and goto Privileges page and set a password for root. Now whenever I go to localhost/phpmyadmin page it gives me the following error. MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. I don't know that what is the problem. It is not showing me a login type page to enter a username and password. Any idea that what is the problem ? Thanks

    Read the article

  • RAMDiskVE keeps causing computer to freeze

    - by Steph
    I found this in the Event Viewer logs: The description for Event ID 11 from source RAMDiskVE cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. Which doesn't say much. The details don't reveal much more: Failed to read configuration information from registry. 0000000002002C00000000000B0007C0000000000000000000000000000000000000000000000000 So my question is, what is RAMDiskVE and what device is it for? Basically I'm trying to rule out hardware but I have no idea what's failing...

    Read the article

  • Hardware Acceleration on Windows Server 2008

    - by user1184598
    Does Windows Server 2008 have hardware acceleration? I tried to use WPF to make over 20,000 drawings. It only cause around 40% CPU in windows 7. However, I run the same program on Windows Server 2008 with the same hardware configuration except that it has a dedicated graphical display card (GT 9500) while Windows 7 has only an onboard display card, it cause over 80% CPU. So, does Windows Server 2008 have hardware acceleration? Or could I make it? And how do I change the hardware acceleration setting? Thanks.

    Read the article

  • Oracle RDBMS Server 11gR2 Pre-Install RPM for Oracle Linux 6 has been released

    - by Lenz Grimmer
    Now that the certification of the Oracle Database 11g R2 with Oracle Linux 6 and the Unbreakable Enterprise Kernel has been announced, we are glad to announce the availability of oracle-rdbms-server-11gR2-preinstall, the Oracle RDBMS Server 11gR2 Pre-install RPM package (formerly known as oracle-validated). Designed specifically for Oracle Linux 6, this RPM aids in the installation of the Oracle Database. In order to install the Oracle Database 11g R2 on Oracle Linux 6, your system needs to meet a few prerequisites, as outlined in the Linux Installation Guides. Using the Oracle RDBMS Server 11gR2 Pre-install RPM, you can complete most of the pre-installation configuration tasks. which is now available from the Unbreakable Linux Network, or via the Oracle public yum repository. The pre-install package is available for x86_64 only. Specifically, the package: Causes the download and installation of various software packages and specific versions needed for database installation, with package dependencies resolved via yum Creates the user oracle and the groups oinstall and dba, which are the defaults used during database installation Modifies kernel parameters in /etc/sysctl.conf to change settings for shared memory, semaphores, the maximum number of file descriptors, and so on Sets hard and soft shell resource limits in /etc/security/limits.conf, such as the number of open files, the number of processes, and stack size to the minimum required based on the Oracle Database 11g Release 2 Server installation requirements Sets numa=off in the kernel boot parameters for x86_64 machines Please see the release announcement for further details and instructions. Also take a look at Ginny Henningsen's "How I Simplified Oracle Database Installation on Oracle Linux" article on the Oracle Technology Network for a general description on how to perform the installation of the Oracle Database on Oracle Linux. While the article refers to Oracle Linux 5 and the former "oracle-validated" package, the steps for Oracle Linux 6 are still very similar (we're looking into updating that article for Oracle Linux 6).

    Read the article

  • Oracle parameter array binding from c# executed parallel and serial on different servers

    - by redir_dev_nut
    I have two Oracle 9i 64 bit servers, dev and prod. Calling a procedure from a c# app with parameter array binding, prod executes the procedure simultaneously for each value in the parameter array, but dev executes for each value serially. So, if the sproc does: select count(*) into cnt from mytable where id = 123; if cnt = 0 then insert into mytable (id) values (123); end if; Assuming the table initially does not have an id = 123 row. Dev gets cnt = 0 for the first array parameter value, then 1 for each of the subsequent. Prod gets cnt = 0 for all array parameter values and inserts id 123 for each. Is this a configuration difference, an illusion due to speed difference, something else?

    Read the article

  • WebCenter Spaces 11g PS2 Task Flow Customization

    - by Javier Ductor
    Previously, I wrote about Spaces Template Customization. In order to adapt Spaces to customers prototype, it was necessary to change template and skin, as well as the members task flow. In this entry, I describe how to customize this task flow.Default members portlet:Prototype Members Portlet:First thing to do, I downloaded SpacesTaskflowCustomizationApplication with its guide.This application allows developers to modify task flows in Spaces, such as Announcements, Discussions, Events, Members, etc. Before starting, some configuration is needed in jDeveloper, like changing role to 'Customization Developer' mode, although it is explained in the application guide. It is important to know that the way task flows are modified is through libraries, and they cannot be updated directly in the source code like templates, you must use the Structure panel for this. Steps to customize Members portlet:1. There are two members views: showIconicView and showListView. By default it is set to Iconic view, but in my case I preferred the View list, so I updated in table-of-members-taskflow.xml this default value.2. Change the TableOfMembers-ListView.jspx file. By editing this file, you can control the way this task flow is displayed. So I customized this list view using the structure panel to get the desired look&feel.3. After changes are made, click save all, because every time a library changes an xml file is generated with all modifications listed, and they must be saved.4. Rebuild project and deploy application.5. Open WLST command window and import this customization to MDS repository with the 'import' command.Eventually, this was the result:Other task flows can be customized in a similar way.

    Read the article

  • Middleware Day at UK Oracle User Group Conference 2012

    - by JuergenKress
    Registration has opened for UK Oracle User Group Conference 2012, the UK’s largest Independent Oracle Technology & E-Business Suite conference from 3rd - 5th December, 2012. The conference will attract over 1,700 attendees from the UK and internationally. Spanning three days and featuring over 250 presentations which range from end-users telling their war stories to Oracle unveiling the latest product roadmaps. We have always been trusted to provide exceptional events with innovative content and renowned speakers and our 2012 event is no exception. It is just not our words, 95% of attendees from the last years conference, highly recommend the experience to other Oracle user. You can get an overview of the conference, listen what last year's delegates thought and explore the full agenda on the conference website: www.ukoug.org/ukoug2012. Join the UK Oracle User Group for ‘Middleware Sunday’ - an event packed with technical content for WebLogic administrators taking place on 2nd December the day before the start of UKOUG Conference 2012. The day has been organised by middleware enthusiasts Simon Haslam and Jacco Landlust and is free to UKOUG 2012 delegates. The content level will be pitched intermediate to advanced. So delegates are expected to be comfortable with WebLogic and its configuration terms, such as domains and managed servers. We will also have a fun, hands-on session for which you’ll need a quick laptop to join our mega-cluster! For more information visit the UKOUG 2012 website: www.ukoug.org/2012. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: simon Haslam,UK user group,middleware sunday,conference,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • CodePlex Daily Summary for Wednesday, March 21, 2012

    CodePlex Daily Summary for Wednesday, March 21, 2012Popular ReleasesMetodología General Ajustada - MGA: 02.02.01: Cambios John: Se actualizan los seis formularios de Identificaciòn para que despuès de guardar actualice las grillas, de tal manera que no se dupliquen los registros al guardar. Se genera instalador con los cambios y se actualiza la base datos con ùltimos cambios en el SP de Flujo de Caja.xyzzy+: xyzzy+ 0.2.2.235+0: SHA1: 4a0258736e7df52bb6e2304178b7fcf02414ae17 PrerequisitesMicrosoft Visual C++ 2010 SP1 Redistributable Package (x86) (ja) FeaturesUnicode Visual Style Known ProblemsCharacter encodings other than Shift_JIS and UTF-X may be broken. Functions related to character encodings may not work. (ex. iso-code-char)Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 12: 1. improved process visualizer, now shows how many dead locks, and what are the locked objects 2. fixed some other problems.Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionDaun Management Studio: Daun Management Studio 0.1 (Alpha Version): These are these the alpha application packages for Daun Management Studio to manage MongoDB Server. Please visit our official website http://www.daun-project.comSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...SmartNet: V1.0.0.0: DY SmartNet ?????? V1.0Project Vanquish: 0.0.3: Implemented SSAO and also added a new Hemispheric light.Relational data Transfer Application: Data Transfer Application: Relational data Transfer Application helps to move data scenarios from One relational database to other Relational database without moving entire tables.Media.Net: 0.1: This is the first version.FolderDrive: FolderDrive release 0.01 (alpha): FolderDrive v. 0.01 [alpha] This is the first alpha release of FolderDrive utility. Known problems: - displays popup message at every startup (needs to be shown only at first start) Plans for next release: - more options - startup behavior fixes - adding permanent drive bindings that don't require the app to be constantly run - ClickOnce deployment (?)Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valueFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsNew Projects320 TWIN System: twin systemArtificial Intelligence Optimization: Optimization of artificial intelligenceAuthor-it DITA Importer: Author-it plug-in that imports DITA XML content into a library.Drag Animated Panel: DragAnimatedPanel is a WPF (Window Presentation Fundation) panel that lets you drag and rearrange elements of animation. It's developed in C#.Empires: Create an empire - in space!EpLibrary: EpLibrary makes it easier for Visual C++ developers to develop an application. You will no longer have to create the basic functionality over and over again. It's developed in Visual C++ 2008.estructuradedatos2012: Our final project, we need hosting; an action game with wiiremote enabled.ExcelTestRunner: With Excel Test Runner, numerical models (eg quantative libraries) in Excel can be used to directly feed your .NET unit tests with input data and test outcomes. Developed in C# and does not use automation.Fast Binary Serialization: fastbinaryserializer is based on local class methods serializing properties unboxed to streams. Besides that is can serialize objects partial.Iveely Search Engine: ?????????。???C#??。IveelyOS (Iveely Operating System): ?????????。JoySys: MVC project .eCommercekinectlearningbswu09: Bachelor project about a motion controlled learning game with Kinect.LabTech: Program stworzony jako laboratorium do testów sprzetu, wirtualnych rozwiazan, symulowania sieci i problemów zlozonych. Sluzy równiez do testowania obciazenia serwerów, sieci i aplikacji. Zawiera: symulator sieci, tester aplikacji, wirtualny serwer i serwery baz danych.LINQPad examples: LINQPad code examplesProjet LIF7: Projet LIF7 RPG Printemps 2012ReCaptcha Validator Plugin for Kooboo CMS for adding content or sending feedback: ReCaptcha Validator Plugin for Kooboo CMS for adding content or sending feedback e-mailSecurity Foundation -- WCF based SSO: This project was started as a WCF based SSO solution that serves ASP.NET websites (through membership providers ) and other winform / web services. Then we realized that we need to bring in claim-based funcitionalities and make it work as our own identity foundation. SharePoint 2010 InfoPath Forms Hub: The SharePoint 2010 InfoPath Forms Hub enables SharePoint users to consume all browserenabled InfoPath forms that are deployed across the entire SharePoint farm from one single Webpart.trident_library: ???????????????User Accounts Manager: Aplikacija, ki omogoca operacije z uporabniki v doloceni domeni na google apps. Za komunikacijo s strežniki uporablja Google Apps API.USI Reporting: Project USI ReportingWAYWO Enterprise Conversation System: Enterprise Conversation SystemxgcBase: my helper????????? ??????? ???: ?????? ????????? (http://d.hatena.ne.jp/gsf_zero1 ) ???????????????????。 ** ????????????????????????????。???????々??????????。 **

    Read the article

  • E-Business Integration with SSO using AccessGate

    - by user774220
    Moving away from the legacy Oracle SSO, Oracle E-Business Suite (EBS) came up with EBS AccessGate as the way forward to provide Single Sign On with Oracle Access Manager (OAM). As opposed to AccessGate in OAM terminology, EBS AccessGate has no specific connection with OAM with respect to configuration. Instead, EBS AccessGate uses the header variables sent from the SSO system to create the native user-session, like any other SSO enabled web application. E-Business Suite Integration with Oracle Access Manager It is a known fact that E-Business suite requires Oracle Internet Directory (OID) as the user repository to enable Single Sign On. This is due to the fact that E-Business Suite needs to be registered with OID to for Single Sign On. Additionally, E-Business Suite uses “orclguid” in OID to map the Single Sign On user with the corresponding local user profile. During authentication, EBS AccessGate expects SSO system to return orclguid and EBS username (stored as a user-attribute in SSO user store) in two header variables USER_ORCLGUID and USER_NAME respectively. Following diagram depicts the authentication flow once SSO system returns EBS Username and orclguid after successful authentication: Topic to brainstorm: EBS AccessGate as a generic SSO enablement solution for E-Business Suite AccessGate Even though EBS AccessGate is suggested as an integration approach between OAM and Oracle E-Business Suite, this section attempts to look at EBS AccessGate as a generic solution approach to provide SSO to Oracle E-Business Suite using any Web SSO solution. From the above points, the only dependency on the SSO system is that it should be able to return the corresponding orclguid from the OID which is configured with the E-Business Suite. This can be achieved by a variety of approaches: By using the same OID referred by E-Business Suite as the Single Sign On user store. If SSO System is using a different user store then: Use DIP or OIM to synch orclsguid from E-Business Suite OID to SSO user store Use OVD to provide an LDAP view where orclguid from E-Business Suite OID is part of the user entity in the user store referred by SSO System

    Read the article

  • Which PHP accelerator to use with prefork mpm (CentOS and RedHat default httpd settings)

    - by FractalizeR
    Hello. As you know, even if it is possible to start httpd in worker mode under CentOS/RedHat, php in default rpm repo is not thread-safe. And the default configuration for stability is mpm_prefork. So, two questions: Is there PHP accelerator capable of working in mpm_prefork mode (using shm or whatever)? If there is none, what can be done to improve PHP speed on CentOS/RedHat systems (I want to use rpms, preferably from default CentOS repo; building custom PHP from source code is not a good option for me)

    Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >