Search Results

Search found 9647 results on 386 pages for 'cross compile'.

Page 325/386 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• how do I get eclipse to use a different compiler version for Java?

  - by codeman73

  It seems like this should be a simple task, with the options in the Preferences menu for different JREs and the ability to set different compiler and build paths per project. However, it also seems to simply not work. For example, I have my JAVA_HOME set to a jre for Java 1.6. It's still not clear to me how Eclipse uses this, but it appears to be defaulting to this and not taking the project overrides. I have also installed Java 1.5, and added a JRE for this in eclipse in the Java-Installed JREs section. In my project, I've set the compiler compliance level to 1.5. In the build path for the project, I've added the System Library for the Java 1.5 JRE. However, I'm getting compile errors for a class that implements PreparedStatement for not implementing abstract methods that only exist in Java 1.6 PreparedStatement. Specifically, the methods setAsciiStream(int, InputStream, long) and setAsciiStream(int, InputStream) Strangely enough, it worked when we were compiling it against Java 1.4, which it was originally written for. We added the JREs for Java 1.4 and referenced that system library in the project, and set the project's compiler level to 1.4, and it works fine. But when I do the same changes to try to point to Java 1.5, it instead uses 1.6. Any ideas why?

  Read the article

• Can threads safely read variables set by VCL events?

  - by Tom1952

  Is it safe for a thread to READ a variable set by a Delphi VCL event? When a user clicks on a VCL TCheckbox, the main thread sets a boolean to the checkbox's Checked state. CheckboxState := CheckBox1.Checked; At any time, a thread reads that variable if CheckBoxState then ... It doesn't matter if the thread "misses" a change to the boolean, because the thread checks the variable in a loop as it does other things. So it will see the state change eventually... Is this safe? Or do I need special code? Is surrounding the read and write of the variable (in the thread and main thread respectively) with critical code calls necessary and sufficient? As I said, it doesn't matter if the thread gets the "wrong" value, but I keep thinking that there might be a low-level problem if one thread tries to read a variable while the main thread is in the middle of writing it, or vice versa. My question is similar to this one: http://stackoverflow.com/questions/1353096/cross-thread-reading-of-a-variable. (Also related to my previous question: http://stackoverflow.com/questions/2449183/using-entercriticalsection-in-thread-to-update-vcl-label)

  Read the article

• Calling method on category included from iPhone static library causes NSInvalidArgumentException

  - by Corey Floyd

  I have created a static library to house some of my code like categories. I have a category for UIViews in "UIView-Extensions.h" named Extensions. In this category I have a method called: - (void)fadeOutWithDelay:(CGFloat)delay duration:(CGFloat)duration; Calling this method works fine on the simulator on Debug configuration. However, if try to run the app on the device I get a NSInvalidArgumentException: [UIView fadeOutWithDelay:duration:]: unrecognized selector sent to instance 0x1912b0 *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[UIView fadeOutWithDelay:duration:]: unrecognized selector sent to instance 0x1912b0 It seems for some reason UIView-Extensions.h is not being included in the device builds. What I have checked/tried I did try to include another category for NSString, and had the same issue. Other files, like whole classes and functions work fine. It is an issue that only happens with categories. I did a clean all targets, which did not fix the problem. I checked the static library project, the categories are included in the target's "copy headers" and "compile sources" groups. The static library is included in the main projects "link binary with library" group. Another project I have added the static library to works just fine. I deleted and re-added the static library with no luck -ObjC linker flag is set Any ideas? nm output libFJSCodeDebug.a(UIView-Extensions.o): 000004d4 t -[UIView(Extensions) changeColor:withDelay:duration:] 00000000 t -[UIView(Extensions) fadeInWithDelay:duration:] 000000dc t -[UIView(Extensions) fadeOutWithDelay:duration:] 00000abc t -[UIView(Extensions) firstResponder] 000006b0 t -[UIView(Extensions) hasSubviewOfClass:] 00000870 t -[UIView(Extensions) hasSubviewOfClass:thatContainsPoint:] 000005cc t -[UIView(Extensions) rotate:] 000002d8 t -[UIView(Extensions) shrinkToSize:withDelay:duration:] 000001b8 t -[UIView(Extensions) translateToFrame:delay:duration:] U _CGAffineTransformRotate 000004a8 t _CGPointMake U _CGRectContainsPoint U _NSLog U _OBJC_CLASS_$_UIColor U _OBJC_CLASS_$_UIView U ___CFConstantStringClassReference U ___addsf3vfp U ___divdf3vfp U ___divsf3vfp U ___extendsfdf2vfp U ___muldf3vfp U ___truncdfsf2vfp U _objc_enumerationMutation U _objc_msgSend U _objc_msgSend_stret U dyld_stub_binding_helper

  Read the article

• How to reuse results with a schema for end of day stock-data

  - by Vishalrix

  I am creating a database schema to be used for technical analysis like top-volume gainers, top-price gainers etc.I have checked answers to questions here, like the design question. Having taken the hint from boe100 's answer there I have a schema modeled pretty much on it, thusly: Symbol - char 6 //primary Date - date //primary Open - decimal 18, 4 High - decimal 18, 4 Low - decimal 18, 4 Close - decimal 18, 4 Volume - int Right now this table containing End Of Day( EOD) data will be about 3 million rows for 3 years. Later when I get/need more data it could be 20 million rows. The front end will be asking requests like "give me the top price gainers on date X over Y days". That request is one of the simpler ones, and as such is not too costly, time wise, I assume. But a request like " give me top volume gainers for the last 10 days, with the previous 100 days acting as baseline", could prove 10-100 times costlier. The result of such a request would be a float which signifies how many times the volume as grown etc. One option I have is adding a column for each such result. And if the user asks for volume gain in 10 days over 20 days, that would require another table. The total such tables could easily cross 100, specially if I start using other results as tables, like MACD-10, MACD-100. each of which will require its own column. Is this a feasible solution? Another option being that I keep the result in cached html files and present them to the user. I dont have much experience in web-development, so to me it looks messy; but I could be wrong ( ofc!) . Is that a option too? Let me add that I am/will be using mod_perl to present the response to the user. With much of the work on mysql database being done using perl. I would like to have a response time of 1-2 seconds.

  Read the article

• Minimal assembler program for CP/M 3.1 (z80)

  - by Andrew J. Brehm

  I seem to be losing the battle against my stupidity. This site explains the system calls under various versions of CP/M. However, when I try to use call 2 (C_WRITE, console output), nothing much happens. I have the following code. ORG 100h LD E,'a' LD C,2 CALL 5 CALL 0 I recite this here from memory. If there are typos, rest assured they were not in the original since the file did compile and I had a COM file to start. I am thinking the lines mean the following: Make sure this gets loaded at address 100h (0h to FFh being the zero page). Load ASCII 'a' into E register for system call 2. Load integer 2 into C register for system call 2. Make system call (JMP to system call is at address 5 in zero page). End program (Exit command is at address 0 in zero page). The program starts and exits with no problems. If I remove the last command, it hangs the computer (which I guess is also expected and shows that CALL 0 works). However, it does not print the ASCII character. (But it does print an extra new line, but the system might have done that.) How can I get my CP/M program to do what the system call is supposed to do? What am I doing wrong?

  Read the article

• why doesn't winmain set the errorlevel?

  - by Brian R. Bondy

  int APIENTRY _tWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { MessageBox(NULL, _T("This should return 90 no?"), _T("OK"), MB_OK); return 90; } Why does the above program correctly display the message box, but does not set the error level? I compile this program to the name a.exe. Then from command prompt I type: c:\> a.exe (message box is displayed, I press ok) c:\> echo %ERRORLEVEL% 0 I get the same results if I do exit(90); right before the return. It still says 0. I also tried to start the program via CreateProcess and obtain the result with GetExitCodeProcess but it also returns 0 to me. I did error checking to ensure it was all started correctly. I originally seen this problem in a more complex program. But made this simple program to verify the problem. Results are the same, both programs that have WinMain return 0 always. I tried both x64, x86 and unicode and MBCS compiling options. All give 0 as an error level/status code.

  Read the article

• QT QSslError being signaled with the error code set to NoError

  - by Nantucket

  My Problem I compiled OpenSSL into QT to enable OpenSSL support. Everything appeared to go correctly in the compile. However, when I try to use the official HTTP example application that can be found here, everytime I try to download an https page, it will signal two QSslError, each with contents NoError. The types of QSslErrors, including NoError, are documented here, poorly. There is no explanation on why they even included an error type called NoError, or what it means. Bizarrely, the NoError error code seems to be true, as it downloads the remote https document perfectly even while signaling the error. Does anyone have any idea what this means and what could possibly be causing it? Optional Background Reading Here is the relevant part of the code from the example app (this is connected to the network connection's sslErrors signal by the constructor): void HttpWindow::sslErrors(QNetworkReply*,const QList<QSslError> &errors) { QString errorString; foreach (const QSslError &error, errors) { if (!errorString.isEmpty()) errorString += ", "; errorString += error.errorString(); } if (QMessageBox::warning(this, tr("HTTP"), tr("One or more SSL errors has occurred: %1").arg(errorString), QMessageBox::Ignore | QMessageBox::Abort) == QMessageBox::Ignore) { reply->ignoreSslErrors(); } } I have tried the old version of this example, and it produced the same result. I have tried OpenSSL 1.0.0a and 0.9.8o. I have tried tried compiling OpenSSL myself, I have tried using pre-compiled versions of OpenSSL from the net. All produce the same result. If this were my first time using QT with SSL, I would almost think this is the intended result (even though their example application is popping up error warning message windows), if not for the fact that last time I played with QT, using what would now be an old version of QT with an old version of SSL, I distinctly remember everything working fine with no error windows. My system is running Windows 7 x64.

  Read the article

• How do I install websocket module for Node.js on Debian VPS?

  - by Ollie Shaw

  I currently am renting a VPS from Dreamhost which runs Debian. I am still learning command line on this OS, but fast! I have successfully installed Node.js, now I want to install the websocket module found here: https://github.com/Worlize/WebSocket-Node From the root user, I have run the following command: npm install websocket The error thrown is: [websocket v1.0.7] Native code compile failed!! On Windows, native extensions require Visual Studio and Python. On Unix, native extensions require Python, make and a C++ compiler. Start npm with --websocket:verbose to show compilation output (if any). What commands should I issue to install this websocket module and its requirements? Thanks very much! Edit: When I run sudo apt-get install gcc make I get this message: Reading package lists... Done Building dependency tree Reading state information... Done gcc is already the newest version. gcc set to manually installed. make is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 44 not upgraded. And the same error when trying to install WebSocket.

  Read the article

• Potential g++ template bug?

  - by Evan Teran

  I've encountered some code which I think should compile, but doesn't. So I'm hoping some of the local standards experts here at SO can help :-). I basically have some code which resembles this: #include <iostream> template <class T = int> class A { public: class U { }; public: U f() const { return U(); } }; // test either the work around or the code I want... #ifndef USE_FIX template <class T> bool operator==(const typename A<T>::U &x, int y) { return true; } #else typedef A<int> AI; bool operator==(const AI::U &x, int y) { return true; } #endif int main() { A<int> a; std::cout << (a.f() == 1) << std::endl; } So, to describe what is going on here. I have a class template (A) which has an internal class (U) and at least one member function which can return an instance of that internal class (f()). Then I am attempting to create an operator== function which compares this internal type to some other type (in this case an int, but it doesn't seem to matter). When USE_FIX is not defined I get the following error: test.cc: In function 'int main()': test.cc:27:25: error: no match for 'operator==' in 'a.A<T>::f [with T = int]() == 1' Which seems odd, because I am clearly (I think) defining a templated operator== which should cover this, in fact if I just do a little of the work for the compiler (enable USE_FIX), then I no longer get an error. Unfortunately, the "fix" doesn't work generically, only for a specific instantiation of the template. Is this supposed to work as I expected? Or is this simply not allowed? BTW: if it matters I am using gcc 4.5.2.

  Read the article

• Elegant way of parsing Data files for Simulation

  - by sc_ray

  I am working on this project where I need to read in a lot of data from .dat files and use the data to perform simulations. The data in my .dat file looks as follows: DeviceID InteractingDeviceID InteractionStartTime InteractionEndTime 1 2 1101 1105 1,2 1101 and 1105 are tab delimited and it means Device 1 interacted with Device 2 at 1101 ms and ended the interaction at 1105ms. I have a trace data sets that compile thousands of such interactions and my job is to analyze these interactions. The first step is to parse the file. The language of choice is C++. The approach I was thinking of taking was to read the file, for every line that's read create a Device Object. This Device object will contain the property DeviceId and an array/vector of structs, that will contain a list of all the devices the given DeviceId interacted with over the course of the simulation.The struct will contain the Interacting Device Id, Interaction Start Time and Interaction End Time. I have a two fold question here: Is my approach correct? If I am on the right track, how do I rapidly parse these tab delimited data files and create Device objects without excessive memory overhead using C++? A push in the right direction will be much appreciated. Thanks

  Read the article

• C# - How to change window state of Form, on a different thread?

  - by Dodi300

  Hello. Does anyone know how I can chage the window state of a form, from another thread? This is the code I'm using: private void button4_Click(object sender, EventArgs e) { string pathe = label1.Text; string name = Path.GetFileName(pathe); pathe = pathe.Replace(name, ""); string runpath = label2.Text; Process process; process = new Process(); process.EnableRaisingEvents = true; process.Exited += new System.EventHandler(process_Exited); process.StartInfo.FileName = @runpath; process.StartInfo.WorkingDirectory = @pathe; process.Start(); WindowState = FormWindowState.Minimized; } private void process_Exited(object sender, EventArgs e) { this.WindowState = FormWindowState.Normal; } It's meant to run a program and minimize, then return to the normal state once the program has closed. Although I get this error "Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on." Any idea how to get this to work? Thanks.

  Read the article

• ios 4.1 doesn't call Phonegap API

  - by Johannes Klauß

  I'm working on a cross platform app for Android 2.2 and iOS 4.1 (dev devices). On Android everything works fine (accelerometer and geolocation) even if it's a little laggy. On iOS it's way more smooth, but he doesn't call the Phonegap functions. That's my JS code: var watchID = null; var shaking = { left: false, right: true }; function startWatch() { // Update acceleration every 100 ms var options = { frequency : 100 }; watchID = navigator.accelerometer.watchAcceleration(function(acceleration) { if(acceleration.x < -8) { shaking.left = true; } else if(acceleration.x > 8) { shaking.right = true; } if(shaking.left && shaking.right) { navigator.notification.vibrate(500); shaking.left = false; shaking.right = false; stopWatch(); } }, null, options); } I just call it with <a href="" onclick="startWatch();">start Accel</a> But iOS doesn't react at all. Is there any special call you need to do in iOS?

  Read the article

• Code Organization Connundrum: Web Project With Multiple Supporting DLLs?

  - by Code Sherpa

  Hi. I am trying to get a handle on the best practice for code organization within my project. I have looked around on the internet for good examples and, so far, I have seen examples of a web project with one or multiple supporting class libraries that it references or a web project with sub-folders that follow its namespace conventions. Assuming there is no right answer, this is what I currently have for code organization: MyProjectWeb This is my web site. I am referencing my class libraries here. MyProject.DLL As the base namespace, I am using this DLL for files that need to be generally consumable. For example, my class "Enums" that has all the enumerations in my project lives there. As does class MyProjectException for all exception handling. MyProject.IO.DLL This is a grouping of maybe 20 files that handle file upload and download (so far). MyProject.Utilities.DLL ALl my common classes and methods bunched up together in one generally consumable DLL. Each class follows a "XHelper" convention such as "SqlHelper, AuthHelper, SerializationHelper, and so on... MyProject.Web.DLL I am using this DLL as the main client interface. Right now, the majority of class files here are: 1) properties (such as School, Location, Account, Posts) 2) authorization stuff ( such as custom membership, custom role, & custom profile providers) My question is simply - does this seem logical? Also, how do I avoid having to cross reference DLLs from one project library to the next? For example, MyProject.Web.DLL uses code from MyProject.Utilities.DLL and MyProject.Utilities.DLL uses code from MyProject.DLL. Is this solved by clicking on properties and selecting "Dependencies"? I tried that but still don't seem to be accessing the namespaces of the assembly I have selected. Do I have to reference every assembly I need for each class library? Responses appreciated and thanks for your patience.

  Read the article

• Configuring an offscreen framebuffer fails the completeness test

  - by randallmeadows

  I'm trying to create an offscreen framebuffer into which I can do some OpenGL drawing, and then pull the bits out manually. I'm following the instructions here, but in step 4, status is 0 instead of GL_FRAMEBUFFER_COMPLETE_OES. If I insert a call go glGetError() after every gl call, it returns 0 (GL_NO_ERROR) every time. But, the values of variables do not change during the call. E.g., GLuint framebuffer; glGenFramebuffersOES(1, &framebuffer); glBindFramebufferOES(GL_FRAMEBUFFER_OES, framebuffer); the value of framebuffer does not get altered at all (even when I change it to some arbitrary value and re-execute). It's almost like the gl calls are not actually being made. I'm linking against OpenGLES framework, and get no compile, link, or run-time errors (or warnings). I'm at a loss as to what to do to fix this. I've tried continuing on with my drawing, but do not see the results I expect, but at this point I can't tell whether it's because of the above error, or the conversion to a UIImage.

  Read the article

• Version Control: multiple version hell, file synchronization

  - by SigTerm

  Hello. I would like to know how you normally deal with this situation: I have a set of utility functions. Say..5..10 files. And technically they are static library, cross-platform - SConscript/SConstruct plus Visual Studio project (not solution). Those utility functions are used in multiple small projects (15+, number increases over time). Each project has a copy of a few files or of an entire library, not a link into one central place. Sometimes project uses one file, two files, some use everything. Normally, utility functions are included as a copy of every file and SConscript/SConstruct or Visual Studio Project (depending on the situation). Each project has a separate git repository. Sometimes one project is derived from other, sometimes it isn't. You work on every one of them, in random order. There are no other people (to make things simpler) The problem arises when while working on one project you modify those utility function files. Because each project has a copy of file, this introduces new version, which leads to the mess when you try later (week later, for example) to guess which version has a most complete functionality (i.e. you added a function to a.cpp in one project, and added another function to a.cpp in another project, which created a version fork) How would you handle this situation to avoid "version hell"? One way I can think of is using symbolic links/hard links, but it isn't perfect - if you delete one central storage, it will all go to hell. And hard links won't work on dual-boot system (although symbolic links will). It looks like what I need is something like advanced git repository, where code for the project is stored in one local repository, but is synchronized with multiple external repositories. But I'm not sure how to do it or if it is possible to do this with git. So, what do you think?

  Read the article

• typename resolution in cases of ambiguity

  - by parapura rajkumar

  I was playing with Visual Studio and templates. Consider this code struct Foo { struct Bar { }; static const int Bar=42; }; template<typename T> void MyFunction() { typename T::Bar f; } int main() { MyFunction<Foo>(); return 0; } When I compile this is either Visual Studio 2008 and 11, I get the following error error C2146: syntax error : missing ';' before identifier 'f' Is Visual Studio correct in this regard ? Is the code violating any standards ? If I change the code to struct Foo { struct Bar { }; static const int Bar=42; }; void SecondFunction( const int& ) { } template<typename T> void MyFunction() { SecondFunction( T::Bar ); } int main() { MyFunction<Foo>(); return 0; } it compiles without any warnings. In Foo::BLAH a member preferred over a type in case of conflicts ?

  Read the article

• Thread-local storage segfaults on NetBSD only?

  - by bortzmeyer

  Trying to run a C++ program, I get segmentation faults which appear to be specific to NetBSD. Bert Hubert wrote the simple test program (at the end of this message) and, indeed, it crashes only on NetBSD. % uname -a NetBSD golgoth 5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Oct 1 15:46:16 CEST 2009 +stephane@golgoth:/usr/obj/sys/arch/i386/compile/GENERIC i386 % g++ --version g++ (GCC) 4.1.3 20080704 prerelease (NetBSD nb2 20081120) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. % gdb thread-local-storage-powerdns GNU gdb 6.5 Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386--netbsdelf"... (gdb) run Starting program: /home/stephane/Programmation/C++/essais/thread-local-storage-powerdns Program received signal SIGSEGV, Segmentation fault. 0x0804881b in main () at thread-local-storage-powerdns.cc:20 20 t_a = new Bogo('a'); (gdb) On other Unix, it works fine. Is there a known issue in NetBSD with C++ thread-local storage? #include <stdio.h> class Bogo { public: explicit Bogo(char a) { d_a = a; } char d_a; }; __thread Bogo* t_a; int main() { t_a = new Bogo('a'); Bogo* b = t_a; printf("%c\n", b->d_a); }

  Read the article

• Generic Singleton Façade design pattern

  - by Paul

  Hi I try write singleton façade pattern with generics. I have one problem, how can I call method from generic variable. Something like this: T1 t1 = new T1(); //call method from t1 t1.Method(); In method SingletonFasadeMethod I have compile error: Error 1 'T1' does not contain a definition for 'Method' and no extension method 'Method' accepting a first argument of type 'T1' could be found (are you missing a using directive or an assembly reference?) Any advace? Thank, I am beginner in C#. All code is here: namespace GenericSingletonFasade { public interface IMyInterface { string Method(); } internal class ClassA : IMyInterface { public string Method() { return " Calling MethodA "; } } internal class ClassB : IMyInterface { public string Method() { return " Calling MethodB "; } } internal class ClassC : IMyInterface { public string Method() { return "Calling MethodC"; } } internal class ClassD : IMyInterface { public string Method() { return "Calling MethodD"; } } public class SingletonFasade<T1,T2,T3> where T1 : class,new() where T2 : class,new() where T3 : class,new() { private static T1 t1; private static T2 t2; private static T3 t3; private SingletonFasade() { t1 = new T1(); t2 = new T2(); t3 = new T3(); } class SingletonCreator { static SingletonCreator() { } internal static readonly SingletonFasade<T1,T2,T3> uniqueInstace = new SingletonFasade<T1,T2,T3>(); } public static SingletonFasade<T1,T2,T3> UniqueInstace { get { return SingletonCreator.uniqueInstace; } } public string SingletonFasadeMethod() { //Problem is here return t1.Method() + t2.Method() + t3.Method(); } } } I use this for my problem. public class SingletonFasade<T1, T2, T3> where T1 : class, IMyInterface, new() where T2 : class, IMyInterface, new() where T3 : class, IMyInterface, new() {//...} Is any solution without Interfaces ??

  Read the article

• How to Elegantly convert switch+enum with polymorphism

  - by Kyle

  I'm trying to replace simple enums with type classes.. that is, one class derived from a base for each type. So for example instead of: enum E_BASE { EB_ALPHA, EB_BRAVO }; E_BASE message = someMessage(); switch (message) { case EB_ALPHA: applyAlpha(); case EB_BRAVO: applyBravo(); } I want to do this: Base* message = someMessage(); message->apply(this); // use polymorphism to determine what function to call. I have seen many ways to do this which all seem less elegant even then the basic switch statement. Using dyanimc_pointer_cast, inheriting from a messageHandler class that needs to be updated every time a new message is added, using a container of function pointers, all seem to defeat the purpose of making code easier to maintain by replacing switches with polymorphism. This is as close as I can get: (I use templates to avoid inheriting from an all-knowing handler interface) class Base { public: template<typename T> virtual void apply(T* sandbox) = 0; }; class Alpha : public Base { public: template<typename T> virtual void apply(T* sandbox) { sandbox->applyAlpha(); } }; class Bravo : public Base { public: template<typename T> virtual void apply(T* sandbox) { sandbox->applyBravo(); } }; class Sandbox { public: void run() { Base* alpha = new Alpha; Base* bravo = new Bravo; alpha->apply(this); bravo->apply(this); delete alpha; delete bravo; } void applyAlpha() { // cout << "Applying alpha\n"; } void applyBravo() { // cout << "Applying bravo\n"; } }; Obviously, this doesn't compile but I'm hoping it gets my problem accross.

  Read the article

• C# Hiding, overriding and calling function from base class.

  - by Lukasz Lysik

  I'm learning C# and I encountered the following problem. I have two classes: base and derived: class MyBase { public void MyMethod() { Console.WriteLine("MyBase::MyMethod()"); } } class MyDerived: MyBase { public void MyMethod() { Console.WriteLine("MyDerived::MyMethod()"); } } For now, without virtual and override key words. When I compile this I get the warning (which is of course expected) that I try to hide MyMethod from MyBase class. What I want to do is to call the method from the base class having an instance of derived class. I do this like this: MyDerived myDerived = new MyDerived(); ((MyBase)myDerived).MyMethod(); It works fine when I do not specify any virtual, etc. keywords in the methods. I tried to put combination of the keywords and I got the following results: | MyBase::MyMethod | MyDerived::MyMethod | Result printed on the console | | -----------------|---------------------|-------------------------------| | - | - | MyBase::MyMethod() | | - | new | MyBase::MyMethod() | | virtual | new | MyBase::MyMethod() | | virtual | override | MyDerived::MyMethod() | I hope the table is clear to you. I have two questions: Is it the correct way to call the function from the base class (((MyBase)myDerived).MyMethod();)? I know about base keyword, but it can be called only from the inside of the derived class. Is it right? Why in the last case (with virtual and override modifiers) the method which was called came from the derived class? Would you please explain that?

  Read the article

• Iframe/Popup redirecting opener window

  - by Bara

  Hello all, I have a page located at x.com. On this page is a button that, when clicked, will launch a new window (using javascript's window.open() method) to a page that is located at z.com. The popup does a few things, then redirects the original window (the opener, x.com) to a different page based on some parameters defined in the popup. This works fine in Firefox/Chrome, but not in IE. In IE (8 specifically, but I believe 7 also has this problem) the original window (the opener) is not redirected. Instead, a new window comes up and THAT window is redirected. I've tried many different methods to try and get this to work, including changing the popup to an iframe loaded on the page and having a function on the opener that the popup/iframe call. The problem seems to be that IE refuses to allow cross-domain sites to talk to each other via javascript. Is there a way around this? How can I get the parent window to redirect to a page based on parameters in a popup or iframe? Bara

  Read the article

• How do tools like Hiphop for PHP deal with heterogenous arrays?

  - by Derek Thurn

  I think HipHop for PHP is an interesting tool. It essentially converts PHP code into C++ code. Cross compiling in this manner seems like a great idea, but I have to wonder, how do they overcome the fundamental differences between the two type systems? One specific example of my general question is heterogeneous data structures. Statically typed languages don't tend to let you put arbitrary types into an array or other container because they need to be able to figure out the types on the other end. If I have a PHP array like this: $mixedBag = array("cat", 42, 8.5, false); How can this be represented in C++ code? One option would be to use void pointers (or the superior version, boost::any), but then you need to cast when you take stuff back out of the array... and I'm not at all convinced that the type inferencer can always figure out what to cast to at the other end. A better option, perhaps, would be something more like a union (or boost::variant), but then you need to enumerate all possible types at compile time... maybe possible, but certainly messy since arrays can contain arbitrarily complex entities. Does anyone know how HipHop and similar tools which go from a dynamic typing discipline to a static discipline handle these types of problems?

  Read the article

• jboss Resteasy for java 5

  - by Anand

  Is there a resteasy version that runs on jdk 5 enviroment? I tried to compile my code in java 5 but it didnot work saying version problem. Is there a solution here? type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: Error instantiating servlet class org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879) org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665) org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528) org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689) java.lang.Thread.run(Thread.java:595) root cause java.lang.UnsupportedClassVersionError: Bad version number in .class file (unable to load class javax.ws.rs.core.UriInfo) org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1964) org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:933) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1405) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1284) java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) java.lang.Class.getDeclaredConstructors0(Native Method) java.lang.Class.privateGetDeclaredConstructors(Class.java:2357) java.lang.Class.getConstructor0(Class.java:2671) java.lang.Class.newInstance0(Class.java:321) java.lang.Class.newInstance(Class.java:303) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879) org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665) org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528) org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689) java.lang.Thread.run(Thread.java:595) note The full stack trace of the root cause is available in the Apache Tomcat/5.5.31 logs.

  Read the article

• C#'s equivalent to VB.Net's DirectCast?

  - by Collin Sauve

  This has probably been asked before, but if it has, I can't find it. Does C# have an equivalent to VB.Net's DirectCast? I am aware that it has () casts and the 'as' keyword, but those line up to CType and TryCast. To be clear, these keywords do the following; CType/() casts: If it is already the correct type, cast it, otherwise look for a type converter and invoke it. If no type converter is found, throw an InvalidCastException. TryCast/"as" keyword: If it is the correct type, cast it, otherwise return null. DirectCast: If it is the correct type, cast it, otherwise throw an InvalidCastException. EDIT: After I have spelled out the above, some people have still responded that () is equivalent, so I will expand further upon why this is not true. DirectCast only allows for either Narrowing or Widening conversions on inheritance tree, it does not support conversions across different branches like () does. ie: C#, this compiles and runs: //This code uses a type converter to go across an inheritance tree double d = 10; int i = (int)d; VB.Net, this does NOT COMPILE 'Direct cast can only go up or down a branch, never across to a different one. Dim d as Double= 10 Dim i as Integer = DirectCast(d, Integer) The equivalent in VB.Net to my C# code is CType: 'This compiles and runs Dim d as Double= 10 Dim i as Integer = CType(d, Integer) (Edit again, I was originally using strings, I changed it to double... sorry)

  Read the article

• gcc, strict-aliasing, and horror stories

  - by Joseph Quinsey

  In http://stackoverflow.com/questions/2906365/gcc-strict-aliasing-and-casting-through-a-union I asked whether anyone had encountered problems with union punning through pointers. So far, the answer seems to be No. This question is broader: do you have any horror stories about gcc and strict-aliasing? Background: Quoting from AndreyT's answer in http://stackoverflow.com/questions/2771023/c99-strict-aliasing-rules-in-c-gcc/2771041#2771041: "Strict aliasing rules are rooted in parts of the standard that were present in C and C++ since the beginning of [standardized] times. The clause that prohibits accessing object of one type through a lvalue of another type is present in C89/90 (6.3) as well as in C++98 (3.10/15). ... It is just that not all compilers wanted (or dared) to enforce it or rely on it." Well, gcc is now daring to do so, with its -fstrict-aliasing switch. And this has caused some problems. See, for example, the excellent article http://davmac.wordpress.com/2009/10/ about a Mysql bug, and the equally excellent discussion in http://cellperformance.beyond3d.com/articles/2006/06/understanding-strict-aliasing.html. Some other less-relevant links: http://stackoverflow.com/questions/1225741/performance-impact-of-fno-strict-aliasing http://stackoverflow.com/questions/754929/strict-aliasing http://stackoverflow.com/questions/262379/when-is-char-safe-for-strict-pointer-aliasing http://stackoverflow.com/questions/725138/how-to-detect-strict-aliasing-at-compile-time So to repeat, do you have a horror story of your own? Problems not indicated by -Wstrict-aliasing would, of course, be preferred. And other C compilers are also welcome.

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >