Search Results

Search found 12772 results on 511 pages for 'the little schemer'.

Page 325/511 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Fonts look squashed or stretched in the browser on Ubuntu

  - by Arjun Menon

  Fonts in the browser on Ubuntu look look squashed/stretched compared to Windows/OSX. This image shows exactly what I mean: http://i.stack.imgur.com/suUXX.png I installed msttcorefonts and configured both Chrome & FF to use Microsoft fonts (Arial, Times New Roman) instead of the default ones. While MS fonts made web pages appear a bit different, regardless of what font it was the squashed/stretched look remained. FreeSans looks a little different from Arial, but it too is rendered squashed/stretched like Arial on both FF & Chrome. Opera renders the Wikipedia page differently from FF & Chrome, but the fonts looks squashed/stretched on it as well. I used to run Kubuntu prior to switching to Ubuntu and at some point I managed to get the fonts on Chrome (only Chrome) look exactly like in the image on the left. I have no idea how I did it though. Firefox and Rekonq retained the squashed/stretched look. I had been using Rekonq for a while, then switched to FF. While using both browsers I had done various things to get the fonts to look better on them with no success - like installing MS fonts & configuring both browsers to use them. I then, after some time, installed Chrome and the fonts magically looked perfect on them - just like on right-hand side of the image. In fact, the font smoothing looked better (to my eye) compared to Windows and OSX. All 3 OSes use subtly different font smoothing strategies and the differences stand out. Later, I formatted & installed Ubuntu 12.04. The first thing I did was install msttcorefonts & then install Chrome. To my dismay, the fonts on Chrome looked just as squashed/stretched as it did in Firefox. There's no browser (except Wine Internet Explorer) that renders fonts properly on my Ubuntu setup right now. Fixing this is definitely possible, since I was able to do it on Kubuntu, but apparently it requires some mysterious tweaking. Would anyone be willing to help me out?

  Read the article

• Is there a better term than "smoothness" or "granularity" to describe this language feature?

  - by Chris

  One of the best things about programming is the abundance of different languages. There are general purpose languages like C++ and Java, as well as little languages like XSLT and AWK. When comparing languages, people often use things like speed, power, expressiveness, and portability as the important distinguishing features. There is one characteristic of languages I consider to be important that, so far, I haven't heard [or been able to come up with] a good term for: how well a language scales from writing tiny programs to writing huge programs. Some languages make it easy and painless to write programs that only require a few lines of code, e.g. task automation. But those languages often don't have enough power to solve large problems, e.g. GUI programming. Conversely, languages that are powerful enough for big problems often require far too much overhead for small problems. This characteristic is important because problems that look small at first frequently grow in scope in unexpected ways. If a programmer chooses a language appropriate only for small tasks, scope changes can require rewriting code from scratch in a new language. And if the programmer chooses a language with lots of overhead and friction to solve a problem that stays small, it will be harder for other people to use and understand than necessary. Rewriting code that works fine is the single most wasteful thing a programmer can do with their time, but using a bazooka to kill a mosquito instead of a flyswatter isn't good either. Here are some of the ways this characteristic presents itself. Can be used interactively - there is some environment where programmers can enter commands one by one Requires no more than one file - neither project files nor makefiles are required for running in batch mode Can easily split code across multiple files - files can refeence each other, or there is some support for modules Has good support for data structures - supports structures like arrays, lists, and especially classes Supports a wide variety of features - features like networking, serialization, XML, and database connectivity are supported by standard libraries Here's my take on how C#, Python, and shell scripting measure up. Python scores highest. Feature C# Python shell scripting --------------- --------- --------- --------------- Interactive poor strong strong One file poor strong strong Multiple files strong strong moderate Data structures strong strong poor Features strong strong strong Is there a term that captures this idea? If not, what term should I use? Here are some candidates. Scalability - already used to decribe language performance, so it's not a good idea to overload it in the context of language syntax Granularity - expresses the idea of being good just for big tasks versus being good for big and small tasks, but doesn't express anything about data structures Smoothness - expresses the idea of low friction, but doesn't express anything about strength of data structures or features Note: Some of these properties are more correctly described as belonging to a compiler or IDE than the language itself. Please consider these tools collectively as the language environment. My question is about how easy or difficult languages are to use, which depends on the environment as well as the language.

  Read the article

• SQL SERVER – Template Browser – A Very Important and Useful Feature of SSMS

  - by pinaldave

  Let me start today’s blog post with a direction question. How many of you have ever used Template Browser? Template Browser is a very important and useful feature of SQL Server Management Studio (SSMS). Every time when I am talking about SQL Server there is always someone comes up with the question, why there is no step by step procedure included in SSMS for features. Honestly every time I get this question, the question I ask back is How many of you have ever used Template Browser? I think the answer to this question is most of the time either no or we have not heard of the feature. One of the people asked me back – have you ever written about it on your blog? I have not yet written about it. Basically there is nothing much to write about it. It is pretty straight forward feature, like any other feature and it is indeed difficult to elaborate. However, I will try to give a quick introduction to this feature. Templates are like a quick cheat sheet or quick reference. Templates are available to create objects like databases, tables, views, indexes, stored procedures, triggers, statistics, and functions. Templates are also available for Analysis Services as well. The template scripts contain parameters to help you customize the code. You can Replace Template Parameters dialog box to insert values into the script. Additionally users can create new custom templates as well with folder structure. To open a template from Template Explorer Go to View menu >> Template Explorer or type CTRL+ALT+L. You will find a list of categories click on any category and expand the folder structure. For our sample example let us expand Index Folder. In this folder you will notice the various T-SQL Scripts. These scripts can be opened by double click or can be dragged to editor area and modified as needed. Sample template is now available in the query editor area with all the necessary parameter place folder. You can replace the same parameter by typing either CTRL+SHIFT+M or by going to Query Menu >> Specify Values for Template Parameters. In this screen it will show  Specify Values for Template Parameters dialog box, accept the value or replace it with a new value. This will now get your script ready to go. Check it one more time and change the script to fit your requirement. I personally use template explorer for two things. First one is obviously for templates but the hidden one and an important one is for learning new features and T-SQL commands. There is so much to learn and so little time. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Microsoft JScript runtime error in Visual studio 2010

  - by anirudha

  There is many tool exist to debug JavaScript visual studio , firebug and some other great plugin are one of them. here I show you solution for Microsoft JScript runtime error: Object doesn't support this property or method  if you search on Google for how to debug Javascript in Visual studio. all of them told you to follow this instruction :- go to Internet option in IE > advanced tab > Browsing section > uhcheck the both option disable script debugging for IE (internet explorer) disable script debugging (others). that’s the information you read are outdate or not true these days. in visual studio you can play with JavaScript debugging even these option is check or unchecked. off-course you  can try these step in express version of visual studio. I found a little problem that my code [based on jQuery plugin] try to call some function. some of them not implement in browser so they call other so that’s fine and work in every browser. when visual studio found some function they trying to call and not implemented in browser I use to debug they tell me Microsoft JScript runtime error: Object doesn't support this property or method  they tell me again whenever I put refresh [f5] in browser. so the thing they do you never like that. see error window first whenever code is not buggy and see everytime before see the page you want to see. this behavior harsh you. there is no problem whenever you not commonly used IE but whenever you really want to debugging you got some pain too from the behavior of this. well I have some patch for that if you really like the debugging in Visual studio with IE. so if you sure that code is not buggy or you really not want to see that’s window here is trick. when you debug the JavaScript in IE choose the compact mode and they never force you to see window first who tell the thing you not want to see. How to do that for reliefs from this pain in visual studio after debug the project or website IE gone automatically launch. go to Developer tool by pressing f12 > you see window something like this:- by the way they give you document mode IE 7 as default or browser mode based on your settings. first thing is that you need to set the compact view [any ] in browser mode. and next time the error window never come again who tell you Microsoft JScript runtime error: Object doesn't support this property or method

  Read the article

• Oracle Open World 2012 is Here!

  - by thatjeffsmith

  Just a quick post today and then probably not much more until next week. Speaking, running hands on labs, meets and greets, and trying to keep up with folks like @oraclenerd means I won’t have much time to write until I get home from San Francisco. Wanted to give a quick shout out to my co-worker and partner-in-Product Management-crime, Ashley Chen this morning. She signed me up for a run across the Golden Gate and back with @bamcgill a few months ago…mostly with my permission. The only thing was, I didn’t run at the time, and that’s basically a 5k. But having goals is good. And yesterday I met a big goal of mine – not looking stupid trying to run across the Golden Gate Bridge. Ok, I did the run and mabye looked a little bit stupid. Ashley, Barry, and I Pre-Run Perfect weather and no fog to cloud the view! So the pre-show fun is over and now it’s time for the show fun to begin. At Oracle Open World? Come by our demo pods. We’re with the other Database folks in the back right-hand corner. We’ll have folks on hand to talk and show Oracle SQL Developer, Oracle SQL Developer Data Modeler, Migrations, and Oracle APEX Listener. Oracle SQL Developer Demo Pod I have the full schedule of SQL Developer presentations and hands on labs here. I know there’s a lot of news on tap this week in the world of Oracle, and we’ll start talking more about it soon. So be sure to subscribe to my feed if you don’t want to miss any of my posts. And I promise not to post any more pictures me. Speaking of pictures, thanks to @dmcghan – or as I call him, ‘Dan the Man’ for running with us and being our official portrait photographer! If you don’t follow him, he’s a great fountain of knowledge in the Oracle APEX world and is one of our ACEs.

  Read the article

• Maven Integrated View for NetBeans IDE

  - by Geertjan

  Started working on an oft-heard request from Kirk Pepperdine for an integrated view for multimodule builds for Maven projects in NetBeans IDE, as explained here. I suddenly had some kind of brainwave and solved all the remaining problems I had, by delegating to the LogicalViewProvider's node, instead of the project's node, which means I inherit all the icons, actions, package nodes, and anything else that was originally defined within the original project, in this case for the open source JAnnocessor project: Above, you can see that the Maven submodules can either be edited in-line, i.e., within the parent project, or separately, by opening them in the traditional NetBeans way. Get the module here: http://plugins.netbeans.org/plugin/45180/?show=true Some people out there might be interested in how this is achieved. First, hide the original ModulesNodeFactory in the layer. Then create the following class, which creates what you see in the screenshot above: import java.util.ArrayList; import java.util.List; import javax.swing.event.ChangeListener; import org.netbeans.api.project.Project; import org.netbeans.spi.project.SubprojectProvider; import org.netbeans.spi.project.ui.LogicalViewProvider; import org.netbeans.spi.project.ui.support.NodeFactory; import org.netbeans.spi.project.ui.support.NodeList; import org.openide.nodes.FilterNode; import org.openide.nodes.Node; @NodeFactory.Registration(projectType = "org-netbeans-modules-maven", position = 400) public class ModulesNodeFactory2 implements NodeFactory { @Override public NodeList<?> createNodes(Project prjct) { return new MavenModulesNodeList(prjct); } private class MavenModulesNodeList implements NodeList<Project> { private final Project project; public MavenModulesNodeList(Project prjct) { this.project = prjct; } @Override public List<Project> keys() { return new ArrayList<Project>( project.getLookup(). lookup(SubprojectProvider.class).getSubprojects()); } @Override public Node node(final Project project) { Node node = project.getLookup().lookup(LogicalViewProvider.class).createLogicalView(); return new FilterNode(node, new FilterNode.Children(node)); } @Override public void addChangeListener(ChangeListener cl) { } @Override public void removeChangeListener(ChangeListener cl) { } @Override public void addNotify() { } @Override public void removeNotify() { } } } Considering that there's only about 5 actual statements above, it's pretty amazing how much can be achieved with so little code. The NetBeans APIs really are very cool. Hope you like it, Kirk!

  Read the article

• What tools exist for assessing an organisation's development capability?

  - by Eric Smith

  I have a bit of a challenge at work at the moment. Presently (and in fact, for some time now), we have been experiencing the following problems with some in-house maintained applications: Defects (sometimes quite serious) being released into production; The Customer (that is, the relevant business unit) perpetually changing their minds (or appearing to do so) about what issue to work on next; A situation where everyone seems to be in a "fire-fighting" mode a lot of the time; Development staff responding to operational requests from business users; ("operational" here means something that needs to be done in order to continue with business, or perhaps just to make a business user's life a little less painful, as opposed to fixing a bug in the application, or enhancing the application); Now I'm sure this doesn't sound particularly new or surprising to most of the participants on this Q&A site and no prizes for identifying the "usual suspects" when it comes to root causes. My challenge is that I have to persuade the higher-ups to do uncomfortable things in order to address all of this. The folk I need to persuade come from a mixture of the following two cultures: Accounting; IT Infrastructure. I have therefore opted for a strategy that draws from things with-which folk from such a culture would be most comfortable (at least, in my estimation), namely: numbers and tangibles. Of course modern development practitioners know all too well that this sort of thing isn't easily solved using an analytical mindset (some would argue that that mindset is, in fact, entirely inappropriate). Never-the-less, this is the dichotomy with-which I am faced, so that's the stake that I've put in the ground. I would like to be able to do research and use the outputs to present findings in the form of metrics and measures. I am finding it quite difficult, though, to find an agreed-upon methodology and set of templates for assessing an organisations development capability--the only thing that seems applicable is the Software Engineering Institute's Capability Maturity Model. The latter, however, seems dated and even then rather vague. So, the question is: Do any tools or methodologies (free or commercial) exist that would assist me in completing this assessment?

  Read the article

• Career Advice: finding challenging work in software and web development

  - by dianovich

  Having left my physics degree early, I started out in the realm of web design / front end web development and was able to get work quite quickly. I moved on to spend a chunk of my time on servers and gained experience with frameworks like Wordpress and Drupal, then the likes of Codeigniter and CakePHP and became comfortable in Debian-based and RHEL/CentOS environments. I ventured in to iOS development and published a couple of native apps to the app store too! I have started to spend a good deal of my time writing Python and have invested a little time in Django. The problem is, I still spend a fair chunk of my time doing more front end web development (writing markup and CSS for site themes, design-lead JavaScript, small applications for which application architecture and software engineering are relatively unimportant or too time consuming to invest in) in my job. What I want to do is really exercise the systematic/logical portion of my brain and tackle challenging problems on a daily basis. I want to have to care about big-oh running times, modularity in software, DRY, performance tuning and development methodologies. I want to work for a firm whose clients say: "Yes, these things are important to us and we'll pay you to get them right." But it is difficult: I have no formal training and am potentially becoming a jack of all trades. Not that being a jack of many trades is necessarily a bad thing, but the scope of work I find myself involved in is far too broad. And, there are only so many hours in a day outside of work! My question is: where do I go from here? I am starting to work on a few open source projects and have started to publish content to my blog. But this isn't likely to make it past the recruitment consultants and HR departments of many-a-firm. And I do not, for example, work in a team that practices agile methodologies, so how do I get work in such a team to gain experience? While I have been responsible for implementing version control and some solid working practices into our current environment, there is only so far I can go in this context. What would convince you that i'm worth taking a risk? What would convince you that i'll have caught up the other guys in your employ in next to no time?

  Read the article

• links for 2011-02-10

  - by Bob Rhubart

  Manish Devgan: Extending WebCenter Spaces Using JDeveloper In addition to being able to customize WebCenter Spaces using the browser-based tools, you can now also customize and “extend” WebCenter Spaces in many ways in JDeveloper.  (tags: oracle enterprise2.0 webcenter jdeveloper) Oracle University: New Personalized Training Catalog "Searching for training classes just got easier with Oracle University's new Personalized Training Catalog. View upcoming course schedules for the topics that you select in your preferred locations. Browse courses when you need to or request your personalized catalog to be emailed to you." (tags: oracle oracleuniversity) René van Wijk: Hibernate and Coherence « Middleware Magic "A major justification for the claim that applications using an object/relational persistence layer are expected to outperform applications built using direct JDBC is the potential for caching." - René van Wijk (tags: oracle coherence middleware) Sten Vesterli on Fusion Applications: " It’s (almost) here!" Speaking of Fusion Applications, Oracle ACE Director Sten Vesterli says: "The usability revolution has finally caught up with enterprise applications; they will no longer be built based on the capabilities of the database, but on the needs of users." (tags: oracle otn oracleace fusionapplications) The Myth of Oracle Fusion | The ORACLE-BASE Blog "I can totally understand when people on the outside of our little goldfish bowl have a really bad and confused impression of anything containing the term “Fusion”, because it does have a very long and sordid history." Oracle ACE Director Tim Hall (tags: oracle otn oracleace fusionapplications) The Other Side of XBRL (Enterprise Performance Management Blog) With the United States SEC's mandate for XBRL filings entering its third year, and impacting over 7000 additional companies in 2011, there's a lot of buzz in the industry about how companies should address the new reporting requirements. (tags: oracle xbrl compliance) Database Vault integration available (The Shorten Spot) Anthony Shorten shares information on the Database Vault solution included in the Oracle Utilities Application Framework. (tags: oracle database) SOASuite 11.1.1.4 : Error Logging into BPM11g Composer? (Angelo Santagata's Blog) Angelo Santagata shares simple solutions to a few minor SOA Suite 11.1.1.4 issues. (tags: oracle soa soasuite bpm) Thierry Vergult: No electricity, but the application is up "Dakar is having more troubles then normal with electricity. Never thought that the SaaS model would be that useful when the light goes out. And the extra battery in the office dies, and the router goes down. But you still can access the application over your smartphone and finish your payroll run." (tags: oracle cloud saas)

  Read the article

• Swiss Re increases data warehouse performance and deploys in record time

  - by KLaker

  Great information on yet another data warehouse deployment on Exadata. A little background on Swiss Re: In 2002, Swiss Re established a data warehouse for its client markets and products to gather reinsurance information across all organizational units into an integrated structure. The data warehouse provided the basis for reporting at the group level with drill-down capability to individual contracts, while facilitating application integration and data exchange by using common data standards. Initially focusing on property and casualty reinsurance information only, it now includes life and health reinsurance, insurance, and nonlife insurance information. Key highlights of the benefits that Swiss Re achieved by using Exadata: Reduced the time to feed the data warehouse and generate data marts by 58% Reduced average runtime by 24% for standard reports comfortably loading two data warehouse refreshes per day with incremental feeds Freed up technical experts by significantly minimizing time spent on tuning activities Most importantly this was one of the fastest project deployments in Swiss Re's history. They went from installation to production in just four months! What is truly surprising is the that it only took two weeks between power-on to testing the machine with full data volumes! Business teams at Swiss Re are now able to fully exploit up-to-date analytics across property, casualty, life, health insurance, and reinsurance lines to identify successful products. These points are highlighted in the following quotes from Dr. Stephan Gutzwiller, Head of Data Warehouse Services at Swiss Re:  "We were operating a complete Oracle stack, including servers, storage area network, operating systems, and databases that was well optimized and delivered very good performance over an extended period of time. When a hardware replacement was scheduled for 2012, Oracle Exadata was a natural choice—and the performance increase was impressive. It enabled us to deliver analytics to our internal customers faster, without hiring more IT staff" “The high quality data that is readily available with Oracle Exadata gives us the insight and agility we need to cater to client needs. We also can continue re-engineering to keep up with the increasing demand without having to grow the organization. This combination creates excellent business value.” Our full press release is available here: http://www.oracle.com/us/corporate/customers/customersearch/swiss-re-1-exadata-ss-2050409.html. If you want more information about how Exadata can increase the performance of your data warehouse visit our home page: http://www.oracle.com/us/products/database/exadata-database-machine/overview/index.html

  Read the article

• How do I configure sound with PulseAudio and Multiseat?

  - by Anthony

  In the spirit of full disclosure, i just posted this question to the ubuntu forums, but i figure more heads working on it couldn't hurt. I have a multi-seat setup working quite well. Hot plugging input devices works as expected and such. The only issue I am still not able to resolve is getting the audio for each seat. Here is a summary of my attempts at getting audio to work: Make ~/.pulse/default.pa dynamically configured based on which $DISPLAY the user logs in at. See this pastebin for the details. Load pulseaudio as a system-wide instance. Couldn't get this to work. None of the audio hardware was accessible to the users. Use udev rules to mark seats in ConsoleKit. Following udev guidelines found here: http://www.freedesktop.org/wiki/Software/systemd/multiseat I didn't think this would work, although it was "guaranteed" to work by someone in irc.freenode #pulseaudio None of those attempts yielded success, which is why I now turn to the community for help. It is quite possible that the suggested methods work and I just messed some aspect of it up, idk. This is the last piece of the puzzle which is needed before I can go and update the MultiseatX page to include instructions for Ubuntu 12.04. My understandings on the situation: Access to pulseaudio is restricted to the active session as marked by ConsoleKit (something about an ACL). CK can only mark one session as active at a time. This simple little fact of life leads me to believe that the solution should involve pulseaudio being run as a system-wide instance. Each user should connect to the pulse server and be limited to a subset of all the hardware. Maybe each user connects to the pulse server via localhost, idk. I do know that regardless of my attempts and their failed results, I was always able to use sudo aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav to play something to any of the hardware. I'm grasping at straws and am now down to the last few hairs i can pull out of my head. Please, help me figure this out so we can share the wealth. Any additional information needed will be provided at your request.

  Read the article

• Use CSS Selectors with HtmlUnit

  - by kerry

  HtmlUnit is a great library for performing web integration tests in Java.  But sometimes node traversal can be somewhat cumbersome. Fear not fellow automated tester (good for you!).  I found a great little project on Github that will allow you to query your document for elements via css selectors similar to jQuery. The project is located at https://github.com/chrsan/css-selectors.  You can use Maven to build it, or download 1.0.2 here.  Beware.  I will not be updating this link so I suggest you download the latest code. In any case, you can use it like so: // from HtmlUnit getting started final WebClient webClient = new WebClient(); final HtmlPage page = webClient.getPage("http://htmlunit.sourceforge.net"); final DOMNodeSelector cssSelector = new DOMNodeSelector(page.getDocumentElement()); final Set elements = cssSelector.querySelectorAll("div.section h2"); final Node first = elements.iterator().next(); assertThat(first.getTextContent(), equalTo("HtmlUnit")); The only problem here is that the querySelectAll returns a Set<Node>.  Not HtmlElement like we may want in some cases.   However, if you were to reflect on the Set, you would find that it is indeed a Set of HtmlElement objects. Typically, I like to create a base class for my web tests.  Just for fun, I am using the $ method similar to jQuery. public class WebTestBase { protected WebClient webClient; protected HtmlPage htmlPage; protected void goTo(final String url){ return (HtmlPage)webClient.getPage(url); } protected List $(final String cssSelector) { final DOMNodeSelector cssSelector = new DOMNodeSelector(htmlPage.getDocumentElement()); final Set nodes = cssSelector.querySelectorAll("div.section h2"); // for some reason Set cannot be cast to Set? final List elements = new ArrayList(nodes.size()); for (final Node node : nodes) { elements.add((HtmlElement)node); } return elements; } } Now we can write tests like this: public class LoginWebTest extends WebTestBase { @Test public void login_page_has_instructions() throws Exception { goTo(baseUrl + "/login") assertThat( $("p.instructions").size(), equalTo(1) ); } }

  Read the article

• How do software projects go over budget and under-deliver?

  - by Carlos

  I've come across this story quite a few times here in the UK: NHS Computer System Summary: We're spunking £12 Billion on some health software with barely anything working. I was sitting the office discussing this with my colleagues, and we had a little think about. From what I can see, all the NHS needs is a database + middle tier of drugs/hospitals/patients/prescriptions objects, and various GUIs for doctors and nurses to look at. You'd also need to think about security and scalability. And you'd need to sit around a hospital/pharmacy/GPs office for a bit to figure out what they need. But, all told, I'd say I could knock together something with that kind of structure in a couple of days, and maybe throw in a month or two to make it work in scale. * If I had a few million quid, I could probably hire some really excellent designers to make a maintainable codebase, and also buy appropriate hardware to run the system on. I hate to trivialize something that seems to have caused to much trouble, but to me it looks like just a big distributed CRUD + UI system. So how on earth did this project bloat to £12B without producing much useful software? As I don't think the software sounds so complicated, I can only imagine that something about how it was organised caused this mess. Is it outsourcing that's the problem? Is it not getting the software designers to understand the medical business that caused it? What are your experiences with projects gone over budget, under delivered? What are best practices for large projects? Have you ever worked on such a project? EDIT *This bit seemed to get a lot of attention. What I mean is I could probably do this for say, 30 users, spending a few tens of thousands of pounds. I'm not including stuff I don't know about the medical industry and government, but I think most people who've been around programming are familiar with that kind of database/front end kind of design. My point is the NHS project looks like a BIG version of this, with bells and whistles, notably security. But surely a budget millions of times larger than mine could provide this?

  Read the article

• Cannot get Virtualbox to install properly on Ubuntu 12.04

  - by lopac1029

  I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• In a multidisciplinary team, how much should each member's skills overlap?

  - by spade78

  I've been working in embedded software development for this small startup and our team is pretty small: about 3-4 people. We're responsible for all engineering which involves an RF device controlled by an embedded microcontroller that connects to a PC host which runs some sort of data collection and analysis software. I have come to develop these two guidelines when I work with my colleagues: Define a clear separation of responsibilities and make sure each person's contribution to the final product doesn't overlap. Don't assume your colleagues know everything about their responsibilities. I assume there is some sort of technology that I will need to be competent at to properly interface with the work of my colleagues. The first point is pretty easy for us. I do firmware, one guy does the RF, another does the PC software, and the last does the DSP work. Nothing overlaps in terms of two people's work being mixed into the final product. For that to happen, one guy has to hand off work to another guy who will vet it and integrate it himself. The second point is the heart of my question. I've learned the hard way not to trust the knowledge of my colleagues absolutley no matter how many years experience they claim to have. At least not until they've demonstrated it to me a couple of times. So given that whenever I develop a piece of firmware, if it interfaces with some technology that I don't know then I'll try to learn it and develop a piece of test code that helps me understand what they're doing. That way if my piece of the product comes into conflict with another piece then I have some knowledge about possible causes. For example, the PC guy has started implementing his GUI's in .NET WPF (C#) and using LibUSBdotNET for USB access. So I've been learning C# and the .NET USB library that he uses and I build a little console app to help me understand how that USB library works. Now all this takes extra time and energy but I feel it's justified as it gives me a foothold to confront integration problems. Also I like learning this new stuff so I don't mind. On the other hand I can see how this can turn into a time synch for work that won't make it into the final product and may never turn into a problem. So how much experience/skills overlap do you expect in your teammates relative to your own skills? Does this issue go away as the teams get bigger and more diverse?

  Read the article

• ASP.NET Membership Password Hash -- .NET 3.5 to .NET 4 Upgrade Surprise!

  - by David Hoerster

  I'm in the process of evaluating how my team will upgrade our product from .NET 3.5 SP1 to .NET 4. I expected the upgrade to be pretty smooth with very few, if any, upgrade issues. To my delight, the upgrade wizard said that everything upgraded without a problem. I thought I was home free, until I decided to build and run the application. A big problem was staring me in the face -- I couldn't log on. Our product is using a custom ASP.NET Membership Provider, but essentially it's a modified SqlMembershipProvider with some additional properties. And my login was failing during the OnAuthenticate event handler of my ASP.NET Login control, right where it was calling my provider's ValidateUser method. After a little digging, it turns out that the password hash that the membership provider was using to compare against the stored password hash in the membership database tables was different. I compared the password hash from the .NET 4 code line, and it was a different generated hash than my .NET 3.5 code line. (Tip -- when upgrading, always keep a valid debug copy of your app handy in case you have to step through a lot of code.) So it was a strange situation, but at least I knew what the problem was. Now the question was, "Why was it happening?" Turns out that a breaking change in .NET 4 is that the default hash algorithm changed to SHA256. Hey, that's great -- stronger hashing algorithm. But what do I do with all the hashed passwords in my database that were created using SHA1? Well, you can make two quick changes to your app's web.config and everything will be OK. Basically, you need to override the default HashAlgorithmTypeproperty of your membership provider. Here are the two places to do that: 1. At the beginning of your element, add the following element: <system.web> <machineKey validation="SHA1" /> ... </system.web> 2. On your element under , add the following hashAlgorithmType attribute: <system.web> <membership defaultProvider="myMembership" hashAlgorithmType="SHA1"> ... </system.web> After that, you should be good to go! Hope this helps.

  Read the article

• XNA - Moving Background Calculations

  - by Jesse Emond

  Hi, My question is relatively hard to explain(for me, at least), so I'll go one step at a time and just tell me in the comments if it's not clear enough. So I'm making a "Defend Your Castle" type 2D game, where two players own a castle and create units that will move horizontally to try to destroy the opponent's base. Here's a screenshot of the game: The distance between both castles is much bigger in a real game though, bigger than the screen's width actually. Because the distance is bigger than the screen's width, I had to implement a simple 2D camera: Camera2D, which only holds a Location Vector2 (and I always make sure this camera is within the field area). Then, I just move all the game elements(castles, units, health bars) by that location, so that if a unit is at (5, 0), and the camera's location is (5, 0), then the unit's position will be moved by 5 units to the left, making it (0, 0) on the screen. At first, I simply used a static background with mountains and clouds(yeah, those are supposed to be mountains and clouds). Obviously, this looked awful: when you moved the camera, the background would stay immobile. Instead, I'd like to make a moving background, kind of a "scrolling" one. But rather than making a background with the same width as the distance between the castles, I'd like to make one that is a little bit smaller(but still bigger than the screen's width). I thought this would create an effect of "distance" with the background(but it might just look awful, too). Here's the background I'm testing with: I tried different ways, but none of them seems to work. I tried this: float backgroundFieldRatio = BackgroundTexture.Width / fieldWidth;//find the ratio between the background and the field. float backgroundPositionX = -cam.Location.X * backgroundFieldRatio;//move the background to the left When I run this with fieldWith = 1600, BackgroundTexture.Width = 1500 and while looking at the rightmost area, the background is offset to the left by a too big amount, and we can see the black clear color in the back, as you can see here: I hope I explained properly what I'm trying to achieve. Thank you for your time. Note: I didn't know what to look for on Google, so I thought I'd ask here.

  Read the article

• Launch 2010 Technical Readiness Unofficial Q&amp;A.

  - by mbcrump

  I had an email from one of my readers about the 2010 Technical Readiness Series. Please read below: Hi Michael, I noticed you blogged a while back that you were going to attend MS 2010 Launch event. I’m going to the session in Seattle on May 27, is it worth it to attend? Also, I’m wondering if they give any free software away like VS2010 Pro? Any decent vendors? Looking forward to hearing back from you. I decided this information would probably benefit several instead of just responding back to the reader. In case you are not aware, MS has a 2010 launch event showing VS2010, Office 2010, SharePoint 2010 and SQL Server 2008R2.  You can sign up for an event here: https://microsoft.crgevents.com/Register2010/Content/Event_Selection.aspx I’ve answered the questions asked below. Q: Is it worth going? A: It is if you have had little or no exposure to the latest 2010 products. Most people are familiar with VS2010, but have not seen SharePoint 2010 Office 2010 or Windows Phone 7. It is designed to get you up to speed very quickly. If you have watched most of the MIX videos and keep up with .NET in general, you will benefit more by having the ability to ask questions.    Q: Did you get any free software? A: No, only demos including: VS2010/Office 2010 – They give you a link to the url where you can download the trial version. Windows 7 Enterprise – You get a DVD with the trial version loaded. Q: Do they give away any cool swag? A: Just a Microsoft T-Shirt (XL). Q: What about the vendor selection? A: At the event that I went to, most vendors were pushing SharePoint products. There wasn’t a lot of variety in the selection. Most vendors were giving away the typical pens, buttons and stickers and trial software. If you have any other questions, feel free to contact me. I will answer and add to this un-official FAQ.

  Read the article

• Part 1 Basic Webtrends REST Examples

  - by GeekAgilistMercenary

  In this entry I just want to cover some examples of how to connect to Webtrends DX Web Services.  The DX Web Services use REST as the architecture, providing simple URI based end points to connect to.  With the Webtrends SDK you can connect to these services with your account information.  Here are the basic steps to retrieve a profile list, the reports from one of those profiles, and then the report you want from that report list. First step is to create a Webtrends User. WebTrends.Sdk.Account.User webtrendsUser = new Account.User(); webtrendsUser.UserName = username; webtrendsUser.Password = password; webtrendsUser.AccountName = account; After you create the Webtrends User, simple request a profile list by getting list of ProfileDefinition Objects. List<WebTrends.Sdk.Profile.ProfileDefinition> profiles = WebTrends.Sdk.Factory.NavigationFactory.BuildListing(webtrendsUser); Next you will want to grab a report based on the profile you are in and your credentials. List<WebTrends.Sdk.Report.ReportDefinition> reports = WebTrends.Sdk.Factory.NavigationFactory.BuildListing(profiles[i], webtrendsUser); In the code above, i would equate to the specific profile you want from the retrieved list of profiles in the profiles list.  The common scenario is that one has pulled the profiles into a drop down, combo, or list box that the user can select.  Then when the user selects the specific profile that profile object can then be used to pull the List of ReportDefinitions. Once we have the report definitions, all sorts of criteria can be added together to query for a specific report.  This is also were things can get a little tricky.  For instance, take a look at the code below. WebTrends.Sdk.Factory.ReportFactory.CreateDimensionalReport( report.ID.ToString(), profiles[i].ID.ToString(), "2010m01", webtrendsUser); The CreateDimensionalReport takes 4 parameters for this particular overload.  The report ID, profile ID, the Webtrends Date Format, and the Webtrends User Object.  There are a number of other overloads available within this factory's method that allow for passing the specific REST URI, and other criteria to retrieve the report of your choice.  In the near future we will be adding some more to this method also, which will provide more flexibility without needing to use the full REST URI. I will have more on this, so all you Coders out there using Webtrends DX Services, I hope this is helpful!  Enjoy. Original Entry

  Read the article

• Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

  - by Don Myers

  My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

  Read the article

• Export all SSIS packages from msdb using Powershell

  - by jamiet

  Have you ever wanted to dump all the SSIS packages stored in msdb out to files? Of course you have, who wouldn’t? Right? Well, at least one person does because this was the subject of a thread (save all ssis packages to file) on the SSIS forum earlier today. Some of you may have already figured out a way of doing this but for those that haven’t here is a nifty little script that will do it for you and it uses our favourite jack-of-all tools … Powershell!!   Imagine I have the following package folder structure on my Integration Services server (i.e. in [msdb]): There are two packages in there called “20110111 Chaining Expression components” & “Package”, I want to export those two packages into a folder structure that mirrors that in [msdb]. Here is the Powershell script that will do that:   Param($SQLInstance = "localhost") #####Add all the SQL goodies (including Invoke-Sqlcmd)##### add-pssnapin sqlserverprovidersnapin100 -ErrorAction SilentlyContinue add-pssnapin sqlservercmdletsnapin100 -ErrorAction SilentlyContinue cls $Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SQLInstance -Query "WITH cte AS ( SELECT cast(foldername as varchar(max)) as folderpath, folderid FROM msdb..sysssispackagefolders WHERE parentfolderid = '00000000-0000-0000-0000-000000000000' UNION ALL SELECT cast(c.folderpath + '\' + f.foldername as varchar(max)), f.folderid FROM msdb..sysssispackagefolders f INNER JOIN cte c ON c.folderid = f.parentfolderid ) SELECT c.folderpath,p.name,CAST(CAST(packagedata AS VARBINARY(MAX)) AS VARCHAR(MAX)) as pkg FROM cte c INNER JOIN msdb..sysssispackages p ON c.folderid = p.folderid WHERE c.folderpath NOT LIKE 'Data Collector%'" Foreach ($pkg in $Packages) { $pkgName = $Pkg.name $folderPath = $Pkg.folderpath $fullfolderPath = "c:\temp\$folderPath\" if(!(test-path -path $fullfolderPath)) { mkdir $fullfolderPath | Out-Null } $pkg.pkg | Out-File -Force -encoding ascii -FilePath "$fullfolderPath\$pkgName.dtsx" }   To run it simply change the “localhost” parameter of the server you want to connect to either by editing the script or passing it in when the script is executed. It will create the folder structure in C:\Temp (which you can also easily change if you so wish – just edit the script accordingly). Here’s the folder structure that it created for me: Notice how it is a mirror of the folder structure in [msdb]. Hope this is useful! @Jamiet

  Read the article

• MSCC: Global Windows Azure Bootcamp - 29th March 2014

  The Mauritius Software Craftsmanship Community proudly presents you the Global Windows Azure Bootcamp 2014 in Mauritius. Global Windows Azure Bootcamp 2014 in Mauritius - MSCC together with Microsoft, Ceridian and Emtel We are very happy and excited about our participation in this global event and would like to draw your attention to the official invitation letter below. Please sign up and RSVP on the official website of the MSCC. Participation is for free! Call for action Please create more awareness of this event in Mauritius and use the hash tag #gwabmru as well as the shortened link: http://aka.ms/gwabmru And remember: Sharing is Caring! Official invitation letter to the GWAB 2014 in Mauritius With over 130 confirmed locations around the globe, the Global Windows Azure Bootcamp is going to be a truly memorable event - and now here's your chance to take part! In April of 2013 we held the first Global Windows Azure Bootcamp at more than 90 locations around the globe! This year we want to again offer up a one day deep dive class to help thousands of people get up to speed on discovering Cloud Computing Applications for Windows Azure. In addition to this great learning opportunity the hands on labs will feature pooling a huge global compute farm to perform diabetes research! In Mauritius, the event will be organised by Microsoft Indian Ocean Islands & French Pacific in partnership with The Mauritius Software Craftsmanship Community (MSCC) and sponsored by Microsoft, Ceridian and Emtel. What do I need to bring?  You will need to bring your own computer which can run Visual Studio 2012 or 2013 (i.e. Windows, OSX, Ubuntu with virtualization, etc.) and have it preloaded with the following: Visual Studio 2012 or 2013 The Windows Azure SDK - http://www.windowsazure.com/en-us/develop/net/ Optionally (or if you will not be doing just .NET labs), the following can also be installed: Node.js SDK - http://www.windowsazure.com/en-us/develop/nodejs/ JAVA SDK - http://www.windowsazure.com/en-us/develop/java/ Doing mobile? Android? iOS? Windows Phone or Windows 8? - http://www.windowsazure.com/en-us/develop/mobile/ PHP - http://www.windowsazure.com/en-us/develop/php/ More info here: http://www.windowsazure.com/en-us/documentation Important: Please do the installation upfront as there will be very little time to troubleshoot installations during the day.  

  Read the article

• CIO's Corner: Achieving a Balance

  - by Michelle Kimihira

  Author: Rick Beers Senior Director, Product Management, Oracle Fusion Middleware All too often, a CIO is unfairly characterized as either technology-focused or business-focused; as more concerned with either infrastructure performance or business excellence. It seems to me that this completely misses the point. I have long thought that a CIO has probably the most complex C-level position in an enterprise, one that requires an artful balance among four entirely different constituencies, often with competing values and needs. How a CIO balances these is the single largest determinant of success. I was reminded of this while reading the excellent interview of Mark Hurd by CNBC’s Maria Bartiromo in a recent issue of USATODAY (Bartiromo: Oracle's Hurd is in tech sweet spot). The interview covers topics such as Big Data, Leadership and Oracle’s growth strategy. But the topic that really got my interest, and reminded me of the need for balance, was on IT spending trends, in which Mark Hurd observed, “…budgets are tight. What most of our customers have today is both an austerity plan to save money and at the same time a plan to reapply that money to innovation. There isn't a customer we have that doesn't have an austerity plan and an innovation plan.” In an era of economic uncertainty, and an accelerating pace of business change, this is probably the toughest balance a CIO must achieve. Yet for far too many IT organizations, operating costs consume over 75% of their budgets, leaving precious little for innovation and investment in business-critical technology programs. I have found that many CIO’s are trapped by their enterprise systems platforms, which were originally architected for Standardization, Compliance and tightly integrated linear Workflows. Yes, these traits are still required for specific reasons and cannot be compromised. But they are no longer enough. New demands are emerging: the explosion in the volume and diversity of Data, the Consumerization of IT, the rise of Social Media, and the need for continual Business Process Reengineering. These were simply not the design criteria for Enterprise 1.0 and attempting to leverage them with current systems platforms results in an escalation in complexity and a resulting increase in operating costs for many IT organizations. This is the cost vs investment trap and what most constrains CIO’s from achieving the balance they need. But there is a way out of this trap. Enterprise 2.0 represents an entirely new enterprise systems architecture, one that is ‘Business-Centric’ rather than ‘ERP Centric’, which defined the architecture of Enterprise 1.0. Oracle’s best in class suite of Fusion Middleware Products enables a layered approach to enterprise systems architectures that provides the balance that an enterprise needs. The most exciting part of all this? The bottom two layers are focused upon reducing costs and the upper two layers provide business value and innovation. Finally, the Balance a CIO needs.  Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• Microsoft Virtual Academy

  Carpe Diem It's been since a while that I could write an article for this blog but alas, I was (and still am) very busy with customer's work. Which is actually good. So, what is this article going to tell you? Well, in general, just what I already tweeted, that life is constant process of learning - especially as software craftsman. Due to an upcoming new customer project in ASP.NET I had to seize the opportunity to get my head deeper into latest available technologies, like Windows Azure and SQL Azure. I know... cloud computing and so on is not a recent development and already available since quite a while but I never any means to get myself into this since roughly two weeks ago. Microsoft Virtual Academy I can't remember exactly what guided me towards the Microsoft Virtual Academy (MVA), oh wait... Yes, it was a posting on Facebook from an old CLIP community friend. He posted a shortened URL with #MVA tag that caught my attention. Thanks for that Thomas Kuberek. After the usual sign in or registration via Live ID I was a little bit surprised that Mauritius is not an available country option... Quick mail exchange with the MVA Decan, and yeah, apologies for the missing entry. So, currently I'm learning about Microsoft products and services, and collecting points under "Not Listed Country" until Mauritius is going to be added. Hopefully soon, as MVA honors your effort with different knowledge ranks that are compared to other students with public profiles. I think it's a nice move to add some game and competition factor into the learning game. The tracks and their different modules are mainly references to publicly available material online, namely on either MSDN, TechNet, Channel9, or other Microsoft based sites. The course material therefore also varies in different media and formats, ranging from simple online articles over downloadable documents (.docx or .pdf) to Silverlight / Windows Media streams with download options. Self-assessment and students ranking Each module in a track can be finished by taking part in a self-assessment. Up to now, the assessment I did (and passed) were limited to 10 minutes available time, and consisted of six to seven questions on the module training material. Nothing too serious but it gives you a glimpse idea how Microsoft certification exams are structured. Conclusion Nothing really new but nicely gathered, assembled and presented to the MVA students. At the moment, I wouldn't dare to compare the richness and quality of those courses with professional training offers, like Pluralsight .NET Training, LearnDevNow, VTC, etc. at all, but I think that MVA has potential. Give it a try, and let me know about your opinions.

  Read the article

• Redgate ANTS Performance Profiler

  - by Jon Canning

  Seemingly forever I've been working on a business idea, it's a REST API delivering content to mobiles, and I've never really had much idea about its performance. Yes, I have a suite of unit tests and integration tests, but these only tell me that it works, not how well it works. I was also about to embark on a major refactor, swapping the database from MongoDB to RavenDB, and was curious to see if that impacted performance at all, so I needed a profiler that supported IIS Express that I can run my integration tests against, and Google gave me:   http://www.red-gate.com/supportcenter/content/ANTS_Performance_Profiler/help/7.4/app_iise   Excellent. Following the above guide an instance of IIS Express and is launched, as is Internet Explorer. The latter eventually becomes annoying, I would like to decide whether I want a browser opened, but thankfully the guide is wrong in that it can be closed and profiling will continue. So I ran my tests, stopped profiling, and was presented with a call tree listing the endpoints called and allowing me to drill down to the source code beneath.     Although useful and fascinating this wasn't what I was expecting to see, I was after the method timings from the entire test suite. Switching Show to Methods Grid presented me with a list of my methods, with the slowest lit up in red at the top. Marvellous.     I did find that if you switch to Methods Grid before Call tree has loaded, you do not get the red warnings.   StructureMap was very busy, and next on the list was a request filter that I didn't expect to be so overworked. Highlighting it, the source code was presented to me in the bottom window with timings and a nice red indicator to show me where to look. Oh horror, that reflection hack I put in months ago, I'd forgotten all about it. It was calling Validate<T>() which in turn was resolving a validator from StructureMap. Note to self, use //TODO: when leaving smelly code lying around.     Before refactoring, remember to Save Profile Results from the File menu. Annoyingly you are not prompted to save your results when exiting, and using Save Project will only leave you thankful that you have version control and can go back in time to run your tests again.   Having implemented StructureMap’s ForGenericType, I ran my tests again and:     Win, thankyou ANTS (What does ANTS stand for BTW?)   There's definitely room in my toolbox for a profiler; what started out as idle curiosity actually solved a potential problem. When presented with a new codebase I can see enormous benefit from getting an overview of the pipeline from the call tree before drilling into the code, and as a sanity check before release it gives a little more reassurance that you've done your best, and shows you exactly where to look if you haven’t.   Next I’m going to profile a load test.

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >