Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 327/740 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• Packet loss with Broadcom wireless and Ubuntu

  - by stevemegson

  I have a machine with Ubuntu 9.04 and a Broadcom BCM4306 wireless card which has been running quite happily for many months with the b43legacy driver that's suggested by Hardware Drivers. Suddenly, I'm now seeing crippling packet loss, varying between 30% and 90% when pinging the router. My WinXP machine is still quite happy even when sat next to the Ubuntu box, so I assume that it's not some new source of interference. What else is likely to have changed? How should I go about diagnosing and fixing this?

  Read the article

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• PXE booting LACP hosts on Force10 S50N with FTOS

  - by lolwutreddit

  Hardware: S50N Firmware: FTOS 8.4.2.6 Problem: We're trying to PXE boot some servers that are connected via port-channel interfaces with LACP. Current Work-around: we PXE boot a server with a single interface (eth0), and then use a Perl script to turn up the port-channel interfaces after the server is built. Details: Is anyone doing anything similar on Force10 S50 switches with FTOS? If not, is anyone doing this on another S series, or larger chassis-based Force10? I'm wondering if Native VLAN will solve this, since ports in a port-channel cannot explicitly have a VLAN set, and they don't seem to use the tagged or untagged VLAN that the port channel is in. I will confirm this next (I think it's the only thing I haven't tried) Juniper Example: http://broken.net/openindiana/how-to-pxe-boot-systems-on-lacp-using-juniper-switches/ Cisco: there are plenty of documented ways to solve this issue on IOS and Nexus Update/Edit: since there seems to be no way to use interface or port-channel mode commands to get the individual interfaces to show up in spanning-tree (rtsp in this case), the ports should never go into a forwarding state. I'm not going to mess with it anymore unless a) someone that has experience passes it on, or b) Force10 comes up with a solution for this (I'm guessing it will only be introduced on other S platforms (S55, S60), since the S50 seems to be near EOL). I'm basing that on the fact that the Open Automation type features are only being supported on the newer switches.

  Read the article

• IPv4 not enabled in Windows 7

  - by RidDeBakTiYar

  I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

  Read the article

• VPN in Ubuntu fails every time

  - by fazpas

  I am trying to setup a vpn connection in Ubuntu 10.04 to use the service from relakks.com I used the network manager to add the vpn connection and the settings are: Gateway: pptp.relakks.com Username: user Password: pwd IPv4 Settings: Automatic (VPN) Advanced: MSCHAP & MSCHAPv2 checked Use point-to-point encryption (security:default) Allow BSD data compression checked Allow deflate data compression checked Use TCP header compression checked The connection always fail, here is the syslog: Jun 27 20:11:56 desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2064 Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jun 27 20:11:56 desktop NetworkManager: <info> VPN plugin state changed: 3 Jun 27 20:11:56 desktop NetworkManager: <info> VPN connection 'Relakks' (Connect) reply received. Jun 27 20:11:56 desktop pppd[2067]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jun 27 20:11:56 desktop pppd[2067]: pppd 2.4.5 started by root, uid 0 Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp1, iface: ppp1): no ifupdown configuration found. Jun 27 20:11:56 desktop pppd[2067]: Using interface ppp1 Jun 27 20:11:56 desktop pppd[2067]: Connect: ppp1 <--> /dev/pts/0 Jun 27 20:11:56 desktop pptp[2071]: nm-pptp-service-2064 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Jun 27 20:11:57 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1024). Jun 27 20:11:59 desktop kernel: [ 56.564074] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=61 TOS=0x00 PREC=0x00 TTL=52 ID=40460 DF PROTO=47 Jun 27 20:11:59 desktop kernel: [ 56.944054] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=40461 DF PROTO=47 Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Jun 27 20:11:59 desktop pppd[2067]: Modem hangup Jun 27 20:11:59 desktop pppd[2067]: Connection terminated. Jun 27 20:11:59 desktop NetworkManager: <info> VPN plugin failed: 1 Jun 27 20:11:59 desktop NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:59 desktop pppd[2067]: Exit. Does someone can identify something in the syslog? I've been googling and reading about pptp but couldn't find anything about the error "read returned zero, peer has closed"

  Read the article

• 50um vs. 62.5um fiber compatability

  - by murisonc

  I've heard that there are compatibility problems when using 50um fiber with some fiber converters. After some research I'm thinking this is a legacy issue when using slower devices (100 Base FX) that used LEDs. I was told that the fiber converters are made for a certain size of fiber core and wont work with 50um fiber. Am I right in thinking this is just a corporate knowledge thing that is outdated when using 1000 Base SX converters (which should be using lasers instead of LEDs)?

  Read the article

• Windows 7 can't connect via ethernet to Airport Extreme

  - by Mr AJL

  I have an Airport Extreme router, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• iPhone Remote with iTunes Library via VPN

  - by sudo work

  Alright, so I'm currently behind a network router (not under my control). The router performs NAT and somehow prevents a computer from scanning other nodes. At least, you're unable, in this instance, to locate an iTunes library. You can, however, communicate with a node's open ports if the local IP address is known, as well as the port. I haven't actually tried port scanning a specific IP using nmap or another tool yet. So I've tried one solution to remove the contribution of the router entirely (to verify that it works without the influence of the routers). I set up an access point using my iPhone and tethered my computer (with the library) to it. From here, I was able to pair my library and the iPhone Remote application. Control of the library was normal as well. This solution is not ideal, however, because I am actively using bandwidth with my computer and cannot afford to be tethered to my 3G connection. A viable solution for me is to use a common VPN connection, which I have set up on a Ubuntu (Intrepid) server that is remote. Both my computer and iPhone are able to access the VPN via PPTP. The server is setup with PPTPD as the VPN-server; I'm using IPTables to perform IP masquerading and forwarding traffic. I however, still cannot connect the library to the phone. I can however, see both devices on the VPN subnet (192.168.0.0/24). SSH'ing and such works fine. What settings on the VPN server must I change to get this to work? Also, how can I assign static IP addresses to various PPTP clients based on MAC addresses?

  Read the article

• Play audio over network with Windows 7?

  - by Josh

  I have a unique situation where I'd like to stream audio (ALL audio, not just mp3s, etc) from my laptop to another computer over the network. I live in a studio apartment and my laptop is my main computer but I'd like it's audio to play on my htpc with a nice stereo system. Since it's a studio, both computers are in the same room so I don't want 2 sets of speakers. I want my computer to directly play back through the stereo. I used to do this with pulseaudio but my job now requires that I run Windows full time. I'm aware of Shoutcast and other similar streaming solutions but I don't want any transcoding done. It's a waste of CPU and not to mention my laptop fans, and I don't mind the network bandwidth that uncompressed audio requires. Is there a way to run Shoutcast without encoding? Also, I know that Windows Remote Desktop can play audio over the network pretty easily. Is this part of .Net that I could just code a simple app that streams the audio without RD'ing in? I also don't want to run it over a physical wire. :)

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• forwarding packets from wireless nic wlan0 to another Wireless nic wlan1

  - by user179759

  I have two wireless interfaces wlan0, wlan1 I want wlan0 to be connected to the internet via a wireless router and I want wlan1 to be in AP mode acting as a router to give internet access to whoever connectes to it. So basically all packets coming through wlan1 should be forwarded to wlan0 = Router = Internet. That's including DNS/DHCP/etc.. [A]~~~~~(Wi-Fi)~~~~~~v [B]~~~~~(Wi-Fi)~~~> [me] ~~~~(Wi-Fi)~~~~~>[AP/Router]------->[internet] [C]~~~~~(Wi-Fi)~~~~~~^ Any idea how can I do this? ps: I tried using bridges but I always get 'operation not supported' using the brctl tool.

  Read the article

• Share laptop Wi-Fi with router set up as access point via ethernet cables

  - by obie

  I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Dynamips Virtual Router not pinging external host after bridging

  - by maiky

  I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

  Read the article

• Does using cat5e cables yield any disadvantages in combination with cat6/cat6a network?

  - by agent154

  If I were to have a fully compliant cat6 or cat6a network running through my walls... that is to say, wires and jacks... What would be the concequence of plugging a cat5e wire into one of the jacks? I'm assuming that it would still run at cat5e standards, but obviously not cat6/6a standards because the whole connection is not cat6. I only ask because it seems silly to me to make a bunch of cat6 patch cables for connections that don't really matter, like standard desktop computers and other equipment. Or will doing so hamper the whole network?

  Read the article

• How do I add a broadcast IP to the loopback interface under os/x using ifconfig when my machine has no network?

  - by bandodeotarios

  I'm new to advanced network administration and I would like to do some testing with UDP broadcasting, so I need a broadcast address on my loopback interface. The machine is offline, in other words, there is no network. How can I accomplish that through ifconfig without having to buy a switch as one user in the comments suggested. In Linux all i have to do is use 127.255.255.255 and broadcasts work fine without any network or any switch. If I have a network i can just use 255.255.255.255, obviously.

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Port forwarding (portmap) works only locally

  - by Tag Wint

  There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

  Read the article

• Robocopy to a drive connected to a wlan router fails

  - by Ville Koskinen

  I have a wireless router and an USB hard drive connected to it. Basic file access on the command line and Explorer works flawlessly after having set up some options on the router and mapping to some folders with net use k: \\ROUTER\Folder1 /user:MYLAPTOP\Me password /persistent:yes net use n: \\ROUTER\Folder2 /user:MYLAPTOP\Me password /persistent:yes Robocopy (and using SyncToy for that matter) to a network drive however fails: robocopy c:\Files k:\Backup /MIR /Z gives There is not enough space on the disk. 2010/01/05 09:52:11 ERROR 112 (0x00000070) Accessing Destination Directory N:\ Waiting 30 seconds... The error message is misleading: there is plenty of space on the disk and the folders I'm copying are small. The router is an ASUS WL-500gp with a standard firmware. I'd appreciate if someone would be able to explain what is causing the problem and, if possible, how to fix it.

  Read the article

• Draytek Vigor 2820 static IP's

  - by dannymcc

  I have a Draytek Vigor 2820 router which is connected to our ADSL provider (British Telecom, BT). We currently have one static IP address which is accessible from anywhere outside of our network and points at a simple web server on port 80. We have just been given 5 more static IP addresses which I would like to point at five servers that have static IP's. As an example: Current static IP - 80.123.123.123 New Static IP's - 100.100.100.100-105 Server IP's - 192.168.1.129-133 I have confused myself completely between NAT addresses, static routes and WAN IP aliases. If anyone can give me a clear idea of what I need to do it would be greatly appreciated.

  Read the article

• Magento - Users unable to login from corporate networks with Bluecoat / F5 Load balancers

  - by user1330440

  Hoping someone has come across this issue before with Magento and corporate clients. We have two clients for our Magento site who both have their internal networks setup using bluecoat security devices and F5 load balancers. Some users within these networks are unable to login to Magento - Magento eventually is sending a 302 redirect to /index.php/ when users attempt to log in. Through our testing, the problem appears to be isolated to this setup - we can log into the accounts in question from anywhere outside of these networks without issue, and if the client tries to access the site without going through the F5 load balancer, they are able to log in successfully. Strangely enough, the issue only started occurring for the two sites the day after we introduced a system upgrade which added a new site to the Magento installation. The system upgrade should not have affected any standard login functionality, and as said, the problem does not appear to be with the users in question, but with where the users are accessing the site from. Initially we thought the issue might have something to do with communications between the client's networks and the network which the server was hosted on, so we've tried moving the server to different hosts, but this has not helped. I'm currently waiting for more info from the clients on exact devices / models used in their network setup. I will update this post if more information becomes avaliable. Magento version is enterprise edition of ver. 1.9.0.0 Does anyone know of any tucked away Magento settings that might be able to cause this kind of behavior? Experience with this kind of set-up and ideas for things to look at? All help and ideas for things to follow-up would be appreciated - as this is a current production issue for a large number of users. I will respond asap with any requests for additional information on the topic, but currently am not able to disclose any identifying information on the project in question, and/or the clients experiencing issues. Thanks in advance for any assistance offered :) Note: This question has also been posted on the Magento forums: http://www.magentocommerce.com/boards/viewthread/277917/ And also on Stack overflow (Moved here as a commenter thought this site may be better suited): http://stackoverflow.com/questions/10133978/magento-users-unable-to-login-from-corporate-networks-with-bluecoat-f5-load

  Read the article

• Cannot run a VM with more than three network interfaces with KVM

  - by Bostonvaulter

  I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

  Read the article

• Using Juniper EX3300 as a router

  - by Richard Whitman

  So I have a Juniper EX3300 Switch. One of its uplink ports (ge-0/1/0) is connected to my ISP's router. ISP router's port address is xx.xx.xx.109. My switch's IP address is xx.xx.xx.110. From the switch, I can ping to xx.xx.xx.109 and any other IP in the world. I mean its connected to the Internet. I connected the port eth0 of a computer (running Ubuntu) to the port ge-0/0/0 of the switch (which in the same VLAN as ge-0/1/0). I configured the port eth0 as follows: iface eth0 inet static address yy.yy.yy.208 netmask 255.255.255.240 gateway xx.xx.xx.110 yy.yy.yy.208 is assigned to me by the ISP. So, now I can ping to the switch (xx.xx.xx.110) from this computer. But I can not ping to either xx.xx.xx.109 (ISP router) or any other IP. I want this computer to be connected to the Internet. What am I doing wrong? Here are some of the configurations on my switch: interfaces { ge-0/0/0 { unit 0 { family ethernet-switching; } } . . . ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family ethernet-switching { port-mode access; } } } . . . vlan { unit 0 { family inet { address 10.0.1.1/24; } } unit 1 { family inet { address xx.xx.xx.110/30; } } } } . . . routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.109; retain; } } } vlans { Cogent { vlan-id 3; interface { ge-0/1/0.0; ge-0/0/0.0; ge-0/0/1.0; ge-0/0/2.0; ge-0/0/3.0; } l3-interface vlan.1; } TFLan { vlan-id 2; interface { ge-0/0/5.0; ge-0/0/6.0; ge-0/0/7.0; ge-0/0/8.0; ge-0/0/9.0; ge-0/0/10.0; ge-0/0/11.0; ge-0/0/12.0; ge-0/0/13.0; ge-0/0/14.0; ge-0/0/15.0; ge-0/0/16.0; ge-0/0/17.0; ge-0/0/18.0; ge-0/0/19.0; ge-0/0/20.0; ge-0/0/21.0; ge-0/0/22.0; ge-0/0/23.0; ge-0/0/4.0; } l3-interface vlan.0; } }

  Read the article

• Windows 8.1 killed notebook's wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >