Search Results

Search found 9989 results on 400 pages for 'grails controller'.

Page 330/400 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• Picking a linux compatible motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Kerberos service on win2k dc will not start following disk failure

  - by iwilson68

  Hi, I have a win2k (mixed mode domain) with 4 DCS. One of these also acts an exchange 2000 server which uses 2 logical volumes from an MSA 2000 array. AD etc is stored on local drives. We experienced a problem last week when the raid array fell back to a redundant controller and this temporarily meant that the two logical drives were not visible to the server for around 5 minutes and a couple of reboots. The log records these Events as Type: Warning Event Source: Disk Event Category: None Event ID: 51 Date: 06/11/2009 Time: 11:46:23 User: N/A Computer: server1 Description: An error was detected on device \Device\Harddisk1\DR1 during a paging operation. Following these problems, the server “kerberos Key Distribution” service refuses to start with an “error.31 a device attached to the system is not functioning”. All other automatic start services (including net logon) are running and there are no DNS issues etc. All devices are also functioning but the two logical MSA disks are now numbered in the Windows Disk Management MMC as 2 and 4 and I suspect that they may have previously been identified as disks 1 & 2 and perhaps windows still sees this as an ongoing failure?? Replication has not been affected but obviously there are many audit failures in the security log relating to users and workstations presumably linked to the Kerberos issue. Attempting to manually start the kerberos service generates the following in the System Log. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 09/11/2009 Time: 09:46:55 User: N/A Computer: Server1 Description: The Kerberos Key Distribution Center service terminated with the following error: A device attached to the system is not functioning. DCDIAG passes all tests except “Advertising” and “Services” which I believe relate directly to the failure of Kerberos only. Any advice would be appreciated.

  Read the article

• Password Policy seems to be ignored for new Domain on Windows Server 2008 R2

  - by Earl Sven

  I have set up a new Windows Server 2008 R2 domain controller, and have attempted to configure the Default Domain Policy to permit all types of passwords. When I want to create a new user (just a normal user) in the Domain Users and Computers application, I am prevented from doing so because of password complexity/length reasons. The password policy options configured in the Default Domain Policy are not defined in the Default Domain Controllers Policy, but having run the Group Policy Modelling Wizard these settings do not appear to be set for the Domain Controllers OU, should they not be inherited from the Default Domain policy? Additionally, if I link the Default Domain policy to the Domain Controllers OU, the Group Policy Modelling Wizard indicates the expected values for complexity etc, but I still cannot create a new user with my desired password. The domain is running at the Windows Server 2008 R2 functional level. Any thoughts? Thanks! Update: Here is the "Account policy/Password policy" Section from the GPM Wizard: Policy Value Winning GPO Enforce password history 0 Passwords Remembered Default Domain Policy Maximum password age 0 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 0 characters Default Domain Policy Passwords must meet complexity Disabled Default Domain Policy These results were taken from running the GPM Wizard at the Domain Controllers OU. I have typed them out by hand as the system I am working on is standalone, this is why the table is not exactly the wording from the Wizard. Are there any other policies that could override the above? Thanks!

  Read the article

• Something very strange with network

  - by Rodnower

  Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Windows Server 2003 SBS domain in multiple sites

  - by E3 Group

  We have about 25 employees in our current office and are looking to open up another office in another capital city housing about 15 employees. In our current office, we are running a domain hosted by a 2003 SBS server and I've been tasked by the boss to expand our infrastructure to the new office in the cheapest way possible (cheapest way in the short run that is, because my boss doesn't think more than 6 months ahead). So I'm looking to get a second hand server and have it run Server 2003 Std with exchange server 2003. These are the things that it needs to do: Replicate shared folders that are hosted in the parent LAN. Deliver emails hosted in the parent Exchange Server Somehow link up with the parent domain controller and push the AD to the remote site I'm pretty sure 3 is impossible but the DC would be available if a VPN connection is present, right? On that note, would I be looking at hardware VPN connections? I'm not sure how to deploy the new site as this is my first time doing it and i'm making it especially difficult for myself, seeing as the AD and DC is on an SBS server. Would I first start by establishing a VPN connection and then joining the new server to the domain? Will things 'just work' if I install exchange onto the new server and point outlooks to it? and how would I be able to replicate shared folders?

  Read the article

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

• Setup.exe called from a batch file crashes with error 0x0000006

  - by Alex

  We're going to be installing some new software on pretty much all of our computers and I'm trying to setup a GPO to do it. We're running a Windows Server 2008 R2 domain controller and all of our machines are Windows 7. The GPO calls the following script which sits on a network share on our file server. The script it self calls an executable that sits on another network share on another server. The executable will imediatelly crash with an error 0x0000006. The event log just says this: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Setup.exe because of this error. Here's the script (which is stored on \\WIN2K8R2-F-01\Remote Applications): @ECHO OFF IF DEFINED ProgramFiles(x86) ( ECHO DEBUG: 64-bit platform SET _path="C:\Program Files (x86)\Canam" ) ELSE ( ECHO DEBUG: 32-bit platform SET _path="C:\Program Files\Canam" ) IF NOT EXIST %_path% ( ECHO DEBUG: Folder does not exist PUSHD \\WIN2K8R2-PSA-01\PSA Data\Client START "" "Setup.exe" "/q" POPD ) ELSE ( ECHO DEBUG: Folder exists ) Running the script manually as administrator also results in the same error. Setting up a shortcut with the same target and parameters works perfectly. Manually calling the executable also works. Not sure if it matters, but the installer is based on dotNETInstaller. I don't know what version though. I'd appreciate any suggestions on fixing this. Thanks in advance! UPDATE I highly doubt this matters, but the network share that the script is hosted in is a shared drive, while the network share the script references for the executable is a shared folder. Also, both shares have Domain Computers listed with full access for the sharing and security tabs. And PUSHD works without wrapping the path in quotes.

  Read the article

• Are SATA II and SATA 3.0 Gbps compatible?

  - by Johnny Maelstrom

  I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

  Read the article

• NFS high CPU usage

  - by user269836

  Hello, I have a very strange issue. I have next server: Intel(R) Xeon(TM) MP CPU 3.16GHz cat /proc/cpuinfo | grep proce | wc -l 8 free -m total used free shared buffers cached Mem: 28203 27606 596 0 10789 9714 -/+ buffers/cache: 7103 21100 Swap: 24695 0 24695 RAID card *-storage description: RAID bus controller product: MegaRAID vendor: LSI Logic / Symbios Logic physical id: 7 bus info: pci@0000:13:07.0 logical name: scsi2 version: 01 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list rom configuration: driver=megaraid latency=32 resources: irq:134 memory:d8ff0000-d8ffffff(prefetchable) memory:df600000-df60ffff(prefetchable) HDD: 10x148Gb SCSI U320 15k - RAID5 /dev/sdb1 807G 674G 93G 88% /storage /dev/sdb1 /storage ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,noatime,nodiratime,noacl,errors=remount-ro 0 1 network cards ethtool -i eth0 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ethtool -i eth1 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ifconfig bond0 Link encap:Ethernet HWaddr 00:0f:1f:ff:d6:4d inet addr:192.168.15.71 Bcast:192.168.15.255 Mask:255.255.255.0 inet6 addr: fe80::20f:1fff:feff:d64d/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1062818202 errors:0 dropped:3918 overruns:0 frame:0 TX packets:1041317321 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10000 RX bytes:258867684559 (241.0 GiB) TX bytes:396569192650 (369.3 GiB) this server running only nfs-kernel-server uname -a Linux nas2-backup 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux Debian 6. What do I have, once per day or two, LA goes up, it can be reached around LA: 40 but if I do: nfs-kernel-server restart. Every thing is OK. But on the next day or a little bit later, LA goes up again. Servers are connected to d-link dgs 1016d with 24 GBits ports. I have tried everything to find out what the problem is. Why it's happening, but still I can not resolve this issue. Any ideas on what is happening here?

  Read the article

• Laptop will not boot

  - by WillumMaguire

  This is a dell studio 1558 laptop. Now, something is wrong with the charger that it won't charge the laptop, but the laptop can turn on and operate properly as long as it is attached. It has been like this for a while, but it's not the problem. My problem is that as of yesterday, It takes several minutes to get past the "dell" startup logo (where is says "f2 setup" and "f12 boot options"). After it gets past, it beeps as normal to tell me about the charger and gives me the f2/f12 options and f1 to continue as normal. I can press f12 to get into boot options and load into my live USB BackTrack 5 ISO, but after "startx" it just stays at a black screen. I can also access BIOS setup, but see nothing that would help the problem. When I boot to the HDD, it gives me this Intel UNDI, PXE-2.1 (build 083) Realktek PCIe GBE Family Controller Series V.2.29 (06/30/09) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Operating System not found Also, pressing f8 gives me the same results as booting as normal. It is running Windows 7 Ultimate, dual-core Intel i3 @ 2.27ghz and 4gb RAM. I think there is an issue with the HDD, as the "Operating System not found" would lead me to believe. Is this a fixable problem?

  Read the article

• How to use Python to read the physical address(MAC ID) [closed]

  - by getjoefree

  I want to read the physical address of the NIC model, i can get the results that i want to with SED.EXE before, but SED.EXE does not support my environment but Python ok, who have the means to do it. The general situation (not plug the network cable, it is impossible to obtain IP address): Ethernet adapter: Connection-specific DNS Suffix.: Chianet Description ...........: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller Physical Address .........: A4-BA-DB-9D-1E-8E Dhcp Enabled ...........: Yes Autoconfiguration Enabled ....: Yes Ethernet adapter 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card Physical Address. . . . . . . . . : 00-23-4D-D9-C0-28 The description of the NIC different, we can use this to fetch the corresponding physical address, base on Physical Address does not work, because the computer with the WLAN Card, I want to use Python to read my computer the card information and after Python handles an output file, output file format: SET MAC = A4BADB9D1E8E and sed format: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" > WINMAC.BAT getmac.sed: /Marvell Yukon 88E8040/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; }

  Read the article

• LSI MegaRAID LINUX got Optimal after degradation but strange POST message

  - by kesrut

  Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

  Read the article

• VPN Error 691 but server says authenticated on server

  - by Andy

  Hello all, I have a problem with a vpn connection on Windows XP SP3 that appears to be related to an account (maybe privilleges or an option that I have missed). When connecting using my account, which is a domain administrator account it will connect to through the vpn fine. However, using an account created for another person they receive Error 691: Username or Password is not valid for this domain. On the domain controller (windows 2003) I see a logon successful message: User DOMAIN\user was granted access. Fully-Qualified-User-Name = int.company.net.au/People/Management/User NAS-IP-Address = 10.30.0.3 NAS-Identifier = not present Client-Friendly-Name = MelbourneCore Client-IP-Address = Router-ip Calling-Station-Identifier = not present NAS-Port-Type = Virtual NAS-Port = 77 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = undetermined Policy-Name = Remote VPN Access Authentication-Type = MS-CHAPv1 EAP-Type = Does anyone have any ideas as to where else I should look for finding a solution? If i use the wrong password it gives a logon failure error in the event viewer. Also removing them from the remote access group gives a logon failure error. Nothing appears in the event viewer on the local machine. In the past all that is required is to add them into our Remote Access Users group. Any help?

  Read the article

• How can adding a server to a domain cause Remote Desktop to stop working?

  - by Adrian Grigore

  I have two dedicated with Windows 2008 R2 servers which I am using for Web hosting. One Server A is a domain controller, Server B should simply be added to the domain controlled by Server A. So I RDP'd into Server B and changed the system settings so that Server B is part of that domain. I entered my domain admin credentials, was welcomed to the domain and asked to reboot the server. So far everything seemed to work smoothly After rebooting, I could not open an RDP connection to Server B anymore: Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled. I restored an older backup of Server B and switched off the firewall before adding the server to my domain. But the problem reoccurred just the same. What could be the reason for this? The domain is brandnew and I did not change any of the default settings. Could this be some kind of domain-wide default policy that shuts down RDP on any domain clients? Or perhaps it has to do with the fact that Server B is virtual? Thanks for your help, Adrian

  Read the article

• EFI vs MBR - Installing Windows Server 2008 R2 or 2012 on 8TB

  - by Riaan de Lange

  I'm having some difficulty installing Windows Server 2008 R2 and Windows Server 2012 on an Intel Server platform. The server specs is as follows: Intel Grizzly Pass Server System - R2308GZ4GC 2x Intel Xeon 2620 - 2.0 GHZ - BX80621E52620 132 GB of Memory REG-DIMM - TS1GKR72V6H 4x Seagate Constellation ES 2TB 3.5" 7200rpm 6GB/S - ST32000645NS Intel Big Laurel 4CH 6G SAS RAID 512MB - RS2BL040 On the Intel RAID Controller Setup, I have setup the HDD to be in RAID-0 - for testing purposes. (Ultimately configured in RAID-5) So, the total size of HDD space I can use is 7.6 TB something... When I install the Server OS's, they don't seem to go beyond 2 TB (1.76 TB) I have read up on EFI and UEFI boot, and this seems to work in 2012, but I could not install any drivers for the motherboard... So, I also tried EFI for 2008R2, and this worked while installing the OS, it did not however work with the Windows Boot Manager option in the BIOS. It kept on freezing once it tries to load the partition. My idea was to allocate the complete 8 TB for the OS, and load a few VM's on there. I have now started with a new approach where I'll have a 256 GB OS Partition, and a secondary 7.5 TB Data partition. Oh, and I also did a diskpart - convert disk to gpt whilst installing 2008R2. The whole disk was accessible, 7.6TB Can anyone please clarify that EFI/UEFI is meant for larger boot volumes? Bigger than 2TB. If I were to have an ideal situation where my OS is run on a SSD, 256GB, and I can attach the 8 TB drives as normal disk to the OS? I'm I correct in saying that if I wanted to boot from a 8TB partition, I would need to force the BIOS to boot from EFI? The limit for MBR is 2 TB as far as I know now... *FYI: The motherboard is EFI-ready

  Read the article

• Setting up Red Hat Enterprise Linux Server as a mail exchange server

  - by Syedur

  I am a Unix/Linux/Windows Server noob. So, keep that in mind before you throw your stones at my glass house. :P I have a Windows Server 2008 R2 machine that's acting as domain controller, Server A. It's also running a DNS server. I have a Red Hat Enterprise Linux Server 5.3, Server B that is intended for mail server. In order for the mail delivery to happen, I understand that I have to set an MX record on Server A and point it to Server B. Well, I did. I manually added a host name on Server A and pointed to Server B's IP address. Then I added an MX record and pointed it to the host name. That didn't do the trick. After taking the above steps, I used the "dig" command on Server B to lookup the MX record coming back from Server A and it wasn't what I was expecting. What am I doing wrong here? I have noticed that... my Windows machines that are joined to the domain (Server A) are listed under the host names. The machines that are not joined to the domain are not list. This is fine, I am not worried about this. What does concern me, do I have to join the Server B to domain in order for Server A to recognize as a valid host and forward the MX properly? If so, some simple steps on how to join Server B to the domain would also help.

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by dotnetdev

  I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

  - by David Tschoepe

  I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over 100MB/sec at least, I would think (another x335 box is running 70-80MB/sec). The server was recently setup and didn't really notice the problem, but may have been there from the beginning, so not sure. I have installed the IBM ServerRAID Windows utility. The server is running Windows 2008 R2 Web edition (if that matters). I thought maybe one of the drives was bad, so far I have removed one of the drives out of the array and tested again, but still the same results. I'm waiting for the RAID1 to resync and I will try pulling the other drive next. I've also used the ServerRAID utility but haven't noticed anything in there that might indicate a problem. Not sure if I'm on the right path here. So looking for some advice to track this down.

  Read the article

• Possible DNS issue after a reinstall of Windows Server 2000 (get off my lawn)

  - by cop1152

  I just replaced a drive on a Win2000 Server that replicates AD and issues out DHCP at one of our offices. I successfully joined it to the domain, setup range of IP's, etc, but am still having issues. I cannot RDC to it with name or IP. I can ping it, browse to it with Windows Explorer, and remote to it with some other software, but not RDC. The other issue is this: Users are unable to authenticate on it. They receive the message 'username or password incorrect' (or something like that). Changes made on the main domain controller seem to take forever to trickle down. The most significant entry in the DNS Server Log is Event ID 7062: The DNS Server Encountered a Packet Addressed to Itself. At least, I think its significant. The Directory Services Log shows numerous Event IDs 1265: The attempt to establish a replication link with parameters failed with the following status: The DSA operation is unable to proceed because of a DNS lookup failure. Does this make any sense to anyone? I feel like its something very simple that I am overlooking. Thanks in advance.

  Read the article

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• SQL 2005 Install completly broken on laptop.

  - by ProfKaos

  My problems started when I set up an exploratory domain controller at home. During that process, I changed the name of my laptop, from 'erisia' to 'erisia-laptop', and this resulted in me losing my admin account on SQL Server 2005 on my laptop. SQL Server seems to store the machine name as part of the user name, so now my local admin account is 'erisia-laptop\brady', which SQL server didn't recognise. I thought I'd cut my losses and just re-install SQL 2005, but the first install was aborted, so I tried a complete uninstall, followed by the new install. The latter didn't work while the former worked way too well. Now every attempt at installing SQL Server 2005 SP2 on my laptop running XP SP3 ends in sadness, with MSXML6 being the cause, because it won't install on this OS version. WTF? Does anyone know what I can do to get SQL 2005 installed? It's the only full admin DB tool I have. SQL 2008 Express that installed with VS 2010 Beta 2 doesn't allow much server admin.

  Read the article

• Under which circumstances can a *local* user account access a remote SQL Server with a trusted connection?

  - by Heinzi

  One of our customers has the following configuration: On the domain controller, there's an SQL Server. On his PC (WinXP), he logs on with LocalPC\LocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It works. In SSMS, the connection shows up with the user Domain\Administrator. Firstly, I was surprised that this even works. (My first suspicion was that there is a user with the same name and password in the domain, but there is no user LocalUser in the domain.) Then we tried to reproduce the same behaviour on his new PC, but failed: On his new PC (Win7), he logs on with OtherLocalPC\OtherLocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It fails with the error message Login failed for user ''. The user is not associated with a trusted SQL Server connection. Hence my question: Under which conditions can a non-domain user access a remote SQL Server using Windows Authentication with different credentials? Apparently, it's possible (it works on his old PC), but why? And how can I reproduce it?

  Read the article

• Wrong Outlook anywhere settings

  - by Ken Guru

  Hey all I wanted to enable NTLM authentication on OutlookAnywhere, and after doing the command Set-OutlookAnywhere -IISAuthenticationMethods Basic,NTLM, my settings got changed. This is a dump before I run the command: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : Rpc (Default Web Site) DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN= EXCAS01,CN=Servers,CN=Exchange Administrative Grou p (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Fi rst Organization,CN=Microsoft Exchange,CN=Services ,CN=Configuration,DC=asp,DC=ssc,DC=no Identity : EXCAS01\Rpc (Default Web Site) Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 05.01.2011 16:59:55 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : IsValid : True Noticde the settings for "Name", "DistinguishedName", and "Identity". After I run the command, I ended up with this: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic, Ntlm} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : EXCAS01 DistinguishedName : CN=EXCAS01,CN=HTTP,CN=Protocols,CN=EXCAS01,CN=Serv ers,CN=Exchange Administrative Group (FYDIBOHF23SP DLT),CN=Administrative Groups,CN=First Organizatio n,CN=Microsoft Exchange,CN=Services,CN=Configurati on,DC=asp,DC=ssc,DC=no Identity : EXCAS01\EXCAS01 Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 06.01.2011 09:43:50 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : ASP-DC-2. IsValid : True Now, the "Name", "DistinguishedName" and "Identity" has changed, and when I try to change it back by running "Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)", I get the following error: [PS] C:\Windows\system32Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)" Set-OutlookAnywhere : The operation could not be performed because object 'EXCA S01\Rpc (Default Web Site)' could not be found on domain controller 'ASP-DC-2.'. Remember, the RPC over HTTP works fine with Basic authentication (even with the wrong settings), but NTLM still doesnt work. How do I change back the settings?

  Read the article

• Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

  - by Matthew Watson

  Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >