Search Results

Search found 10244 results on 410 pages for 'space complexity'.

Page 330/410 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• Update a bootable OS X drive clone with rsync?

  - by Joe

  The question: is it possible to keep a boot-able backup drive clone of OS X updated with rsync? If rsync is not a viable option are there alternatives? The Setup: My situation is as shown above. One internal Samsung 840 SSD [120g] in use as my OS X 10.8 boot disk on a recent model Mac Mini. I have successfully cloned that drive with disk utility to a 125g partition of another HDD in an external USB 3 enclosure and at that point I am able to boot to it. The Goal: As my last system went out in a fiery blaze taking much valuable data with it, I have a new respect for a proper backup solution and really want to do this right. My goal is to achieve an automated differential backup/update from Disk A to Disk B while most importantly maintaining boot-ability on the external drive. And I would prefer to do this differentially to minimize stress on the drives. Hence rsync was the first thing to come to mind. What I have tried: following along with Jamie Zawinski's differential mac bootable backup solution running this manually initially worked - i tested it with only very miniscule file change and everything was fine / external booted and all. now after subsequent passes rsync fails throwing errors particularly relating to updating 'boot.efi' (not at the machine currently I will update the precise log message once I return home) is this a drive partition size issue? does rsync require more space? if it cant be done, are there any alternatives? i've heard whispers of dd

  Read the article

• Win7 System folder contains infinitely looping SYSTEM(!) directory

  - by Matt

  My Windows 7 Enterprise computer has been crashing fairly frequently recently, so I decided to boot up in safe mode and run the TrendMicro client I have installed. It froze about 10 minutes into the full system scan, so in the spirit of http://whathaveyoutried.com, I started scanning each folder individually. When I got to ProgramData, the AV failed with an uncaught exception. I then went down a level and tried scanning Application Data, which failed as well. Imagine my surprise when I open the folder just to see the same folder again! As far as I can tell, this folder loop continues indefinitely. (If you are trying to recreate this, keep in mind that ProgramData is a hidden folder.) I'm actually a bit concerned that these are system folders, as this is a brand-new computer with a clean installation. I guess I have three questions: Has anyone else seen/experienced this before? I'm running Win7 SP1. How do I fix this? I've run CHKDSK \F with no success (although it was incredibly slow). What are the ramifications of an infinitely recursive directory? Theoretically speaking, each link takes up memory, so shouldn't I have no space available on my hard drive? (I've got about 180GB left.) I noticed that the tree view on the left only shows the "linked folder" icon on the deeper folders--does this mean anything special? (I've circled the icons or lack thereof in red.) How can the OS even resolve this aberration? And above all, what would happen if I were to select "Expand all folders"??? :P Matt

  Read the article

• Can many addon domains slow down cPanel or create problems?

  - by Marco Demaio

  I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he want be able to access all cPanel features, but that's ok. My only question is: "is there a limit on the number of cPanel addon domain that can be added?". I know in my account I'm allowed to add unlimited addon domains, but is there something that might happen that slows down cPanel or could create problems? I mean is there any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that Awstast could run very slow or crash", or "be aware that mails from different addon domains under the same cp account could create many problems.", etc.) Many thanks!

  Read the article

• Differential backup missing moved folders (flawed archive attribute logic)

  - by Max

  Recently I've discovered that my backup system it flawed: there are situation where various files/folders are missed. I do my backup from local disk to a network NAS. I use Cobian backup, and I have setup the backup software to create one full backup every week, and one differential backup every day. Now, the backup software (to my knowledge any backup software work this way) decide the files that go in the differential backup by looking at the file archive attribute. If the attribute is set, then the file go in to the backup. Now, when you move a file to a new location, on Windows systems, the archive attribute get set and the file is included in the backup, and that's fine... but when you move an entire folder, no archive attribute is set, nor on the folder, nor in any files inside the folder, so the moved folder isn't included in the differential backup! So, if you have a full backup plus a differential backup, and you moved folders around... then it's impossible to reconstruct the original files/folders structure starting from the full+differential backup, because the backup software didn't include the moved folders in the differential backup. So my differential backup are useless... Why does windows set the archive attribute when moving a file, but not when moving a folder? How can I deal with this issue? Is there a way to create a differential backup that works as it's supposed to do? Doing full backup every day is not practical, because the changed data is about 0.1% at day (by using a differential backup I can keep 4 weeks of files history without using too much disk space.)

  Read the article

• How to resolve virtual disk degraded in Windows Server 2012

  - by harrydev

  I am using the new Storage Spaces feature in Windows Server 2012. I have the following disks: FriendlyName CanPool OperationalStatus HealthStatus Usage Size ------------ ------- ----------------- ------------ ----- ---- PhysicalDisk2 False OK Healthy Auto-Select 2.73 TB PhysicalDisk3 False OK Healthy Auto-Select 2.73 TB PhysicalDisk4 False OK Healthy Auto-Select 2.73 TB PhysicalDisk5 False OK Healthy Auto-Select 2.73 TB There is also a separate OS disk. The above disks are part of a single storage pool: FriendlyName OperationalStatus HealthStatus IsPrimordial IsReadOnly ------------ ----------------- ------------ ------------ ---------- Pool OK Healthy False False Within this storage pool some virtual disks are defined, see below: FriendlyName ResiliencySettingNa OperationalStatus HealthStatus IsManualAttach Size me ------------ ------------------- ----------------- ------------ -------------- ---- Docs Mirror OK Healthy False 500 GB Data Mirror Degraded Warning False 500 GB Work Mirror Degraded Warning False 2 TB Now the virtual disks are all running normal 2-way mirror, but two of the virtual disks are degraded. This is probably because one of the physical disks was offline for a short period of time. However, now the virtual disk cannot be repaired, even though, all physical disks are healthy. There is plenty of available space in the storage pool. This I cannot understand so I was hoping for some help, on how to resolve this? Below I have listed the full output from the Get-VirtualDisk CmdLet for the "Work" disk: ObjectId : {XXXXXXXX} PassThroughClass : PassThroughIds : PassThroughNamespace : PassThroughServer : UniqueId : XXXXXXXX Access : Read/Write AllocatedSize : 412316860416 DetachedReason : None FootprintOnPool : 824633720832 FriendlyName : Work HealthStatus : Warning Interleave : 262144 IsDeduplicationEnabled : False IsEnclosureAware : False IsManualAttach : False IsSnapshot : False LogicalSectorSize : 512 Name : NameFormat : NumberOfAvailableCopies : 0 NumberOfColumns : 2 NumberOfDataCopies : 2 OperationalStatus : Degraded OtherOperationalStatusDescription : OtherUsageDescription : Disk for data being worked on (not backed up) ParityLayout : PhysicalDiskRedundancy : 1 PhysicalSectorSize : 4096 ProvisioningType : Thin RequestNoSinglePointOfFailure : True ResiliencySettingName : Mirror Size : 2199023255552 UniqueIdFormat : Vendor Specific UniqueIdFormatDescription : Usage : Other PSComputerName :

  Read the article

• SVN, Samba and Symbolic Links. How to get them all to play together?

  - by Camsoft

  I've got a website project under version control that relies on files from an unversioned directory on the same server via Symbolic Links. I'm currently storing the symbolic links in the repository. The idea is that if someone checks out a working copy on to the same server they can edit and test the working copy of the project before committing it back to the repository. When they checkout their working copy it successfully sets up the symlinks so that the entire site works when testing. The users that work on the project are Windows users, so I've set a samba shares on the server and then mapped them to network drives in Windows. People can edit their working copies directly on the server via network shares and then test them in the web browser before committing their changes back to the repository via TortoiseSVN. The Problem The problem I have is that Samba resolves the symlinks as expected but when a user tries to commit their changes back to the repository, TortoiseSVN thinks the linked files are part of the project and tries to commit the target files to the repository and not the symlinks themselves. I tried turning off symlink support in samba which means that the linked files cannot be resolved as I don't really want people to have access to the linked files nor do I want to import the linked files in the repository. The problem with this is that I get Can't stat '\webserver\projects\working\project\symlinked_file.php'. Access is denied Apart from the symlink problem everything else works 100% perfectly. Users can either checkout website projects to their machine and work on them (but can't test) or checkout them out to their space on the dev web server and work on them and fully test. So I don't want to change the workflow process, I just need a solution to the symbolic link issue. Many thanks. Originally posted on StackOverflow: http://stackoverflow.com/questions/2400917/svn-samba-and-symbolic-links-how-to-get-them-all-to-play-together

  Read the article

• Bouncing between a 502 and 503 error

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Solr startup script problem

  - by Camran

  I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• KVM and libvirt: How to configure a new disc device to an existing VM?

  - by initall

  I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Vista Screen resolution Changes when Switching Users

  - by Benjol

  I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

  Read the article

• Filesystem fragmentation on the level of set of files

  - by trismarck

  The file is stored in blocks by the file system. The block is the smallest amount of data the file system can assign to store a file. The classical definition of a fragmented file is that the file is stored in blocks that are 'scattered' (that are physically non-contiguous) around the hard drive. What I want to ask about is this second type of fragmentation I've came up with. Lets suppose we install a program. This program has very many files. When the program starts, the program always loads the contents of those files sequentially. Now, even if the hard disk is defragmented, there is still a possibility that the files (but not the blocks building up to files) will be scattered on the disk and thus the program launch time will be longer. Actually, this time could be longer due to defragmentation of the disk, as the defragmentation process not only glues fragmented files but also moves some files to optimize free space chunks. The questions: is the type of fragmentation I mentioned relevant for the file system? is it possible to remedy this kind of fragmentation and if yes, how would you do it? Also, I'm not sure if this question should belong to superuser or to serverfault (as I guess the filesystem fragmentation is more important in the server environment).

  Read the article

• Varnish, Nginx, Apache, APC, Meteor, Cpanel & Wordpress On A Single Server, Any Good?

  - by Aahan

  Yes, I have read many close questions, but I needed a specific answer and hence this question. First, these are my new server specifications: Linux Server (CentOS), Intel Xeon 3470 Quad Core (2.93GHz x 4) processor, 4 GB DDR3 Memory, 1TB Hard Disk Space, 10 TB Bandwidth and 9 Dedicated IPs. AIM: To speed up my wordpress blog + Increase server's capacity to handle heavy load PLAN: This is how I am planning to setup my server - - VARNISH (in the front, to cache server responses) NGINX (to effectively handle static content & overcome the C10k problem) APACHE (behind Nginx, to effectively deliver dynamic content) APC (PHP page, database & object caching) CPANEL (which requires Apache, and I require it) WORDPRESS W3 TOTAL CACHE (caching plugin for Wordpress). So , will the setup work? Have anyone tried it? Please shower your thoughts and knowledge. NOTE: I can't do without Apache because I am used to that .htaccess & Cpanel stuff. So, it's not any option. All others are options. Please try to help. I hope I am clear in what I wanted to ask.

  Read the article

• Is my OCZ SSD aligned correctly? (Linux)

  - by Barney Gumble

  I have an OCZ Agility 2 SSD with 40 GB of space. I use it as a system drive in Debian Linux (Squeeze) and in my opinion it's really fast. But I've read a lot on aligning partitions and file systems... And I'm not sure if I succeeded in aligning the partitions correctly. Maybe the SSD could be even faster?? ;-) I use ext4 and here is the output of fdisk -cul: Disk /dev/sda: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78161328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 73242623 36620288 83 Linux /dev/sda2 73244670 78159871 2457601 5 Extended /dev/sda5 73244672 78159871 2457600 82 Linux swap / Solaris My partitions were created just by the Debian Squeeze setup assistant. So I didn't care about the details of partitioning. But now I think maybe the installer didn't align it correctly? Actually, 2048 looks good to me (better than odd values like 63 or something like that) but I've no idea... ;-) Help plz! According to some "SSD Alignment Calculator" I found on the web, the OCZ SSDs have a NAND Erase Block Size of 512kB and their NAND Page Size is 4kB. 2048 is divisible by 4 and 512. So are the partitions aligned correctly?

  Read the article

• IP queue buffer

  - by summerbulb

  I seem to have an issue with IP queue. I have a linux machine that I am using to run some experiments. The linux machine is configured to be a router, having two NICs, connecting two other computers, and managing their network traffic. All incoming packages are captured, using iptables, and analyzed by a C application. The application analyzing the packets has a built-in delay, as part of the experiment. So I have one very fast computer sending packets through my linux-router and a (relatively) slow linux-router that analyses and deals with the packets, one by one. This situation leads to the fact that when I fire up a sender application on one of the computers connected to the linux-router, my IP queue on the linux-router gets filled up (almost) instantaneously. The IP queue's max length is currently set to 1024, and if it overflows, the packets are dropped. This is expected and i'm OK with it. But, (and this is where it gets interesting), every now and then I get the following error: "Failed to receive netlink message: No buffer space available" At start, I thought this was due to the IP queue overflow, but after some analysis i found that sometimes I get the error even if the IP queue buffer did not overflow, and sometime I DON'T get the message even though the buffer DID overflow. When I run > cat /proc/net/ip_queue, I get the following table (also used to monitor the IP queue overflow): Peer PID : 27389 Copy mode : 2 Copy range : 65535 Queue length : 0 Queue max. length : 1024 Queue dropped : 1166875 Netlink dropped : 2916 Looking at the last two values, Queue dropped seems to refer to packets that did not manage to get into the IP queue because the buffer was full. I can see this value rise as I bombard the linux-router. Netlink dropped ( as it's name implies :) ) seems to have to do with the error i'm getting. I did my best to search for material on this error, but wasn't able to find anything that seemed to point me in the required direction. Bottom line: Why am I getting this error and what can I do to avoid it?

  Read the article

• Preventing h/w RAID cards from dropping slow JBOD disks

  - by Kevin

  I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it should be simple to JBOD the other drives, but some of them are inexpensive SATA disks and probably cannot have TLER disabled. I'd like to know, prior to actually ordering a RAID card, whether typically RAID cards would still enforce dropping of disks that do not respond within a few seconds, even if the disk is in a JBOD, and whether there is any way to disable this. Ideally it would be nice to be able to select certain SAS ports that will be pass-through, bypassing the RAID engine entirely and just acting as an HBA for those ports. I know I could buy a separate SAS HBA but that seems like a waste of $ and is also impractical as it's a 1U server so space is extremely limited. My question then is whether the functionality I'm looking for (pass-through on certain ports or at least JBOD drives not getting themselves dropped due to slow response) is typical of proper h/w RAID cards such as PERC 5/E etc. I've browsed through the latter's manual but unfortunately, as with most user manuals, it states the obvious and doesn't state the unobvious. Thanks for any info, Kevin

  Read the article

• compile ntp without ssl

  - by Zulakis

  I need to deploy ntp to a very space-critical pxe-imaging-system. (Yes, each KB matters.) Footprint needs to be as small as possible, so I want to compile ntp without linking openssl. According to the manual this is should be possible: If available, the OpenSSL library from http://www.openssl.org is used to support public key cryptography. The library must be built and installed prior to building NTP. The procedures for doing that are included in the OpenSSL documentation. The library is found during the normal NTP configure phase and the interface routines compiled automatically. Only the libcrypto.a library file and openssl header files are needed. If the library is not available or disabled, this step is not required. I already tried out ./configure --without-openssl however, this didn't help. This is my ldd output: ldd ntpd/ntpd linux-gate.so.1 => (0xb7706000) libm.so.6 => /lib/i686/cmov/libm.so.6 (0xb76d5000) libcrypto.so.0.9.8 => /usr/lib/i686/cmov/libcrypto.so.0.9.8 (0xb7582000) librt.so.1 => /lib/i686/cmov/librt.so.1 (0xb7578000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb741d000) /lib/ld-linux.so.2 (0xb7707000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7419000) libz.so.1 => /usr/lib/libz.so.1 (0xb7404000) libpthread.so.0 => /lib/i686/cmov/libpthread.so.0 (0xb73eb000) The system I am compiling on is 32-bit debian lenny using openssl 0.9.8g-15+lenny16. What is the correct configure option to compile ntp without openssl?

  Read the article

• How to organise storage for media content such as video and music?

  - by thor

  Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

  Read the article

• How do I increase the buffer size for domain sockets in OS X 10.6

  - by Chas. Owens

  In Linux I have no problem dumping tons of data into a domain socket, but the same code on OS X 10.6.2 blows up after about 65 records. The socket reader code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; unlink "foo"; my $sock = IO::Socket::UNIX->new ( Local => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; while (<$sock>) { chomp; print "[$_]\n"; } And the client code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; my $sock = IO::Socket::UNIX->new ( Peer => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; for my $i (1 .. 1_000_000) { print $sock "$i\n" or die $!; } close $sock; The error message I get is No buffer space available at write.pl line 15.. It seems fairly obvious that there is a difference in the buffer size between Linux and OS X, but I don't know how to set it OS X (or what the possible negative side effects might be).

  Read the article

• How to serve media across home network?

  - by TK Kocheran

  I'm looking to share my media across my home network. Router fully supports running a DLNA server, but I don't know if it'd be better to run the server from my main server computer instead of from the router, as the router would have to operate off of a network share and my server can operate directly off of the files. Here's what I need to serve, in order of importance: ISO 1:1 DVD rips (4-8GB files), MP4/H.264 encoded videos, MKV videos, MP3 files, JPEG/CR2 images. Maybe I'm completely ludicrous for wanting to push full DVD files across my network, but in reality, I would assume that only the parts of the actual file needed (ie: menu, main video payload for main title) would be served at any one time. Plus, encoding takes time and precious disk space, so why not stream it 1:1 ;) Does anyone know of the best way to accomplish this? Main goal is to serve it to Logitech Revue downstairs and secondary goal is to serve it to other computers in the house. For music, I assume I could run a DAAP server, but I don't think that the Revue supports that (and I can't exactly throw together an app that does it just yet).

  Read the article

• Extract a section of a tgz file

  - by TRiG

  I have a 28.5 GB .tgz file which was created on the command line of a Linux computer, compressing one folder and all its many many subfolders. I now want to extract a single sub-sub folder from that .tgz file, using 7zip on Windows Vista. I can't see a way to do it. Opening the .tgz file in 7zip just shows the .tar file inside it. There doesn't seem to be any way to browse that .tar file and extract the section I want. I assume there is a way to do this, but I can't see it. Simply double-clicking on the .tar file brings up a progress bar which runs slowly till my computer complains it's running out of space; I imagine it's trying to extract the whole thing. Searching for "extract section of tgz" and "extract tgz subfolder" and similar found me a way to do it on the Linux command line, but no obvious way to do it on Windows. (Most results found were about extracting into a subfolder, not extracting a subfolder out of the archive.)

  Read the article

• What is the peak theoretical WiFi G user density? [closed]

  - by Bigbio2002

  I've seen a few WiFi capacity planning questions, and this one is related, but hopefully different enough not to be closed. Also, this is related specifically to 802.11g, but a similar question could be made for N. In order to squeeze more WiFi users into a space, the transmit power on the APs need to be reduced and the APs squeezed closer together. My question is, how far can you practically take this before the network becomes unusable? There will come a point where the transmit power is so weak that nobody will actually be able to pick up a connection, or be constantly roaming to/from APs spaced a few feet apart as they walk around. There are also only 3 available channels to use as well, which is a factor to consider. After determining the peak AP density, then multiply by users-per-AP, which should be easier to find out. After factoring all of this in and running some back-of-the-envelope calculations, I'd like to be able to get a figure of "XX users per 10ft^2" or something. This can be considered the physical limit of WiFi, and will keep people from asking about getting 3,000 people in a ballroom conference on WiFi. Can anyone with WiFi experience chime in, or better yet, provide some calculations for a more accurate figure? Assumptions: Let's assume an ideal environment with no reflection (think of a big, square, open room, with the APs spaced out on a plane), APs are placed on the ceiling so humans won't absorb the waves, and the only interference are from the APs themselves and the devices. As for what devices specifically, that's irrelevant for the first point of the question (AP density, so only channel and transmit power should matter). User experience: Wikipedia states that Wireless G has about 22Mbps maximum effective throughput, or about 2.75MB/s. For the purpose of this question, anything below 100KB/s per user can be deemed to be a poor user experience. As for roaming, I'll assume the user is standing in the same place, so hopefully that will be a non-issue.

  Read the article

• setup lowcost image storage server with 24x SSD array to get high IOPS?

  - by Nenad

  I want to build let's name it a lowcost Ra*san which would host for our social site the images (many millions) we have 5 sizes of every photo with 3 KB, 7 KB, 15 KB, 25 KB and 80 KB per Image. My idea is to build a Server with 24x consumer 240 GB SSD's in Raid 6 which will give me some 5 TB Disk space for the photo storage. To have HA I can add a 2nd one and use drdb. I'm looking to get above 150'000 IOPS (4K Random reads). As we mostly have read access only and rarely delete photos i think to go with consumer MLC SSD. I read many endurance reviews and don't see there a problem as long we don't rewrite the cells. What you think about my idea? - I'm not sure between Raid 6 or Raid 10 (more IOPS, cost SSD). - Is ext4 OK for the filesystem - Would you use 1 or 2 Raid controller, with Extender Backplane If anyone has realized something similar i would be happy to get Real World numbers. UPDATE I have buy 12 (plus some spare) OCZ Talos 480GB SAS SSD Drive's they will be placed in a 12-bay DAS and attached to a PERC H800 (1GB NV Cache, manufactured by LSI with fastpath) Controller, I plan to setup Raid 50 with ext4. If someone is wondering about some benchmarks let me know what you would like to see.

  Read the article

• ExpressCache not working after Windows 8 reinstall on Samsung Series 7 Gamer

  - by Morven

  I have a Samsung Series 7 Gamer laptop which came with Windows 8. After doing a reinstall of Windows, the ExpressCache software is no longer caching. Running "eccmd -info" shows me that the software is present and it has the MSATA drive partition configured. However, it's not actually caching anything. These are the results after having the system booted for days: C:\windows\system32eccmd -info ExpressCache Command Version 1.0.94.0 Copyright¬ 2010-2012 Condusiv Technologies. Date Time: 11/3/2013 12:26:20:263 (JAMETHIEL #36) EC Cache Info ================================================== Mounted : Yes Partition Size : 7.46 GB Reserved Size : 3.00 MB Volume Size : 7.46 GB Total Used Size : 86.50 MB Total Free Space : 7.38 GB Used Data Size : 16.63 MB Used Data Size on Disk : 84.38 MB Tiered Cache Stats ================================================== Memory in use : 32.00 MB Blocks in use : 136 Read Percent : 0.02% Cache Stats ================================================== Cache Volume Drive Number : 1 Total Read Count : 97242 Total Read Size : 4.13 GB Total Cache Read Count : 0 Total Cache Read Size : 595.50 KB Total Write Count : 161546 Total Write Size : 5.89 GB Total Cache Write Count : 0 Total Cache Write Size : 0 Bytes Cache Read Percent : 0.01% Cache Write Percent : 0.00% As you can see on the last two lines, cache read and write percent is nigh on zero. Anyone know where to look next? The only guides I can find deal with ExpressCache not being present or not having a configured drive.

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >