Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 331/627 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• Dirt Cheap Bi-Directional Antenna Wirelessly Extends Your LAN

  - by Jason Fitzpatrick

  If you’re looking for an effective way to link remote LANs without the hassle of laying cable, this DIY bi-directional antenna is a quick (and cheap) method for bringing internet access to outbuildings and other locations. Tinker Danilo Larizza needed to share internet access between apartments that are relatively close together but not hardwired–ruling out simply sharing the access via existing LAN infrastructure. His solution combines a simple scrap wire antenna array mounted inside a plastic food bin (seen here with the cover removed to show the antenna) and some coaxial cable to link the antenna to two routers. Our favorite part about his build is that he constructed the pair to establish if the antenna setup would even work in his location and intended to buy commercial antennas if it did; his Tupperware models worked so well, however, they’re now the permanent solution. Hit up the link below for more information about the project. 2.4 Ghz Directive Biquad Antenna [via Hack A Day] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Software RAID to hardware RAID, can it be done?

  - by gtaylor85

  Can it be done ... well. (For the record, I did not set this server up.) In my server there are 4 disks. 3 of them are in a software RAID5, and 1 has the OS installed. I want to buy a RAID controller, 4 new HDs and set up a hardware RAID5. If possible, I'd like to just image the current setup, and use it to build my new one. My questions are: Can I image a 3 disk RAID5 to 4 disk RAID5? Are there problems with this? What is considered best practice for your OS. To have it on a separate disk like it currently is, or to install it on the RAID5? Thank you. I can clarify anything. I'm not sure what other info might be pertinent.

  Read the article

• Clustering and custom applications

  - by Ahmed ilyas

  I was not entirely sure what tags to put but hope this is ok. This is just a general question in regards to clustering and applications: so lets say we have a clustered environment setup. We cluster SQL Server (I dont know exactly how its done but lets just say its been done for the sake of argument). Now if a website or application is trying to access that database for read/write (say an ASP.NET app or a C# Winforms app) and during that time SQL goes down - it takes a couple of minutes for the clustering failover to take affect to switch to another node. What happens during this time? I think it will time out/unable to connect. BUT is there a way for it to place the request in some pipeline so when the cluster node is back up/switched over it will continue as normal? as you can see, I know nothing much about clustering! what about your own custom .NET apps? Would there be a special way to develop them? I know that you can say create a simple Hello world app, and cluster that but they wouldnt be something you could see interms of the UI or anything, so they would effectively need to be developed as a Windows Service perhaps or even as a standard Console app which runs and not wait for user input but you wouldnt see any output from it (unless you redirect output to somewhere else) What im getting at here is... for those who have experience or developed a cluster application in .NET, how did you do it and what are the things to be aware of? For example we have the cloud service - fundamentally its built on clustering - if there is an outage, another node takes place and service is resumed as normal but we dont really see much of that downtime.

  Read the article

• Blank pale blue screen with Live USB Kubuntu on AMD Sempron 2800+ processor

  - by WGCman

  I am trying to install Kubuntu onto a USB stick to use on my Acer Aspire 1362 laptop with an AMD Sempron 2800+ chip. Using Windows XP, I downloaded and saved to the laptop's hard drive: kubuntu-2.04.1-desktop-i386.iso from the GetKubuntu website and LinuxLive USB Creator 2.8.16.exe from the Linux live website I then installed the latter and ran it, installing the kubuntu onto the Memory stick. Leaving the Bios setup unchanged, the USB stick is ignored and Windows boots. If I change the Bios boot order so that the memory stick takes precedence, I see a dark blue screen announcing Kubukntu 12.04, and on selecting either “live Mode” or “Persistent mode”, messages flash by quickly, some of which appear to be error messages, including “trying to unpack rootfs image as initramfs”, “cannot allocate resource for mainboard”, “no plug and play device found”. Eventually I see a pale blue screen with four moving dots announcing Kubukntu 12.04, similar to the login screen of my Kubuntu desktop, but no invitation to log in or indeed any dialog. After several minutes, this changes to a black screen with more messages including “no caching mode present”, “ADDRCONF(NETDEV_UP): wlan0: link is not ready”, then degrades to a blank pale blue screen which can only be moved by switching the computer off. Finding no way to log the error messages passing by, I managed to photograph most of them, but know no way to attach the photo to this forum. As suggested by User 68186 (to whom thanks!), I have edited my original post to reflect the recent progress, so the following two comments are now superseded.

  Read the article

• faster ( squid + apache httpd + apache tomcat )

  - by letronje

  We have a production setup where we have Squid in the front(caching images, js, css, etc) Apache httpd in the middle(prefork + mod_rewrite + mod_jk/AJP + mod_deflate + mod_php(few php pages)) Apache tomcat 5.5 at the end serving all the dynamic stuff. What would be the best way to reduce the overhead of having 3 servers in the request path ? Wondering if replacing httpd with a faster web server like nginx/lighttpd will help. httpd right now does the job of url rewriting(for clean urls) and talking to tomcat(via mod_jk) and compressing output(mod_deflate) and serving some low traffic php pages. What would be ideal replacement for httpd given that we need these features? Is there a way to replace (squid + apache) with a single entity that does caching well (like squid) for static stuff, rewrites url, compresses response and forwards dynamic stuff directly to tomcat ? heard abt varnish cache, wondering if it can help.

  Read the article

• DHCP-server doesn't start at boot because of wrong startup order

  - by stolsvik

  Apparently the isc-dhcp-server is started too early in the boot sequence, it states that it has nothing to do. If I just log directly in as root and start it using the init.d-script, it starts normally. My setup is basically an utterly standard router, with an eth0 on the inet side, and an eth1 on the lan side. However, I've defined a bridge instead of the eth1 for the lan-side. Thus, the lan-part of the network isn't up until the bridge is up. I currently believe that the dhcp server is brought up before the bridge is brought up, probably because the bridge is brought up with the 'networking' task, while the eth's are taken up with the 'network-interface' tasks - which are run earlier. (also, the bridge takes a small age to get up compared to the eth's). If I do take away the bridge config, instead using eth1 directly for the lan side, things work. (However, judging by syslog, things are still tight.) Ideas of how the get DHCP to start later? (The reason for the bridge, is to be able to use KVM with bridged networking..)

  Read the article

• How to hide the mouse cursor

  - by MvG

  I'm building a kiosk using Ubuntu Precise on a touch screen. Now I'm looking for the appropriate way to make the mouse cursor disappear. As people know where they are pointing, displaying an arrow under their finger is useless, and having an error where they last pointed even more so. My best bet would be some kind of cursor theme consisting only of transparent cursors. I'm a bit surprised to find no UI to switch and maybe install cursor themes the default Unity UI, but as I won't be using Unity, that's not much of a problem. It appears that the alternatives listed in update-alternatives --list x-cursor-theme all refer to .theme files, so I searched the package list for those. The resulting list does not list any likely candidates, i.e. no packages containing “invisible” or “transparent” in their name. So far, some googled result yielding a readme for “XCursor Transparent Theme” is my best bet. That would mean compiling those sources myself, perhaps putting them into my PPA. I'm also a bit sceptical about that result as said readme is dated from 2003. And I'm not sure that I'm not making things overly complicated. After all, there is quite some support in Precise for touch devices, so I don't believe I'm the first one who wants to get rid of his mouse cursor. Is there another way which doesn't involve user-compiled binary code? Is there a theme package for transparent cursors which I've overlooked? Is there some other mechanism to make the cursor disappear without changing the cursor theme? I'll be using Matchbox WM, Firefox and Java applets, so I'll be happy with any solution working under such a setup. I'm not interested in any solutions twiddling with Gnome or Compiz, as I'll not be running either.

  Read the article

• XNA, how to draw two cubes standing in line parallelly?

  - by user3535716

  I just got a problem with drawing two 3D cubes standing in line. In my code, I made a cube class, and in the game1 class, I built two cubes, A on the right side, B on the left side. I also setup an FPS camera in the 3D world. The problem is if I draw cube B first(Blue), and move the camera to the left side to cube B, A(Red) is still standing in front of B, which is apparently wrong. I guess some pics can make much sense. Then, I move the camera to the other side, the situation is like: This is wrong.... From this view, the red cube, A should be behind the blue one, B.... Could somebody give me help please? This is the draw in the Cube class Matrix center = Matrix.CreateTranslation( new Vector3(-0.5f, -0.5f, -0.5f)); Matrix scale = Matrix.CreateScale(0.5f); Matrix translate = Matrix.CreateTranslation(location); effect.World = center * scale * translate; effect.View = camera.View; effect.Projection = camera.Projection; foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(cubeBuffer); RasterizerState rs = new RasterizerState(); rs.CullMode = CullMode.None; rs.FillMode = FillMode.Solid; device.RasterizerState = rs; device.DrawPrimitives( PrimitiveType.TriangleList, 0, cubeBuffer.VertexCount / 3); } This is the Draw method in game1 A.Draw(camera, effect); B.Draw(camera, effect); **

  Read the article

• Changing the partition icon for Boot Camp

  - by zneak

  Hey guys, I've installed Windows 7 for a dual-boot setup on my new Core i7 MacBook Pro. Now, just for the looks, I'd like to change the volume icon. The partition is in NTFS format. I remember that in the past (with Leopard), you just had to add a .VolumeIcon.icns file at the root of a volume to set its icon. It seems this trick wore off with Snow Leopard. It apparently still works with CDs and DVDs, but hard drives keep that old, boring drive icon, no matter how lovely the .VolumeIcon.icns file I've put at the root. How can I change that?

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• installing jdk1.7.0 on Ubuntu 11.04 machine

  - by Yogesh

  I am facing a problem while trying to install Java 7 on Ubuntu. The following are the steps that I performed for installing: I installed the setup file from the link given below: wget http://download.oracle.com/otn-pub/java/jdk/7u1-b08/jdk-7u1-linux-x64.tar.gz I have a file: jdk-7u1-linux-x64.tar.gz I Untared it: tar -xvf jdk-7u1-linux-x64.tar.gz sudo mv ./jdk1.7.0_01 /usr/lib/jvm/jdk1.7.0_01 sudo update-alternatives –config java Here it gave me the following output: There is only one alternative in link group java: /usr/lib/jvm/java-6-sun/jre/bin/java Nothing to configure. sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_01/jre/bin/java 1(I entered 1 here.) sudo update-alternatives --config java java -version. It showed the following output java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) I am not sure if jdk1.7.0 is installed as its showing the version as 1.6.0_26.

  Read the article

• Zimbra Relaying from Postfix connection timed out sending multiple emails?

  - by liamTc

  I have a web server setup with postfix which is relaying email to a zimbra server. This working fine however I have attempted to send a few thousand emails and now the connection from postfix to zimbra is timing out. All of the emails have been deferred on the postfix queue. If I try to send individual emails from postfix to zimbra it works fine. But if I try to flush the postfix queue all of the emails time out. In mail.log the emails look like this: postfix/error[2494]: 32B0950C04: to=, relay=none, delay=19431, delays=19402/29/0/0.01, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to mail.server.com[123.45.678.91]:25: Connection timed out) I have also noticed that in the above message it says "relay=none" for these emails that are failing. But the emails that do send say "relay=domainname.com". How I can resolve this, by sending the emails in the queue and avoiding this from happening again?

  Read the article

• Chainloading GRUB2 from BURG

  - by WindowsEscapist

  I have an old PC with Puppy Linux in addition to Ubuntu and Windows XP. THis creates a LOT of menu entries (all of which I would like to keep): Ubuntu 10.04 Ubuntu Recovery Mode Memtest x86 Memtest Serial Windows XP Pro Precise Puppy Linux Precise Puppy TORAM Puppy 4.3.1 Puppy 4.3.1 TORAM Plop Boot Manager (for booting to USB, PC doesn't have BIOS option). Now, in my fancy shiny laptop I've gotten really attached to BURG, and would like a setup where I have a Windows icon, an Ubuntu icon, and an arrow that chainloads GRUB2 so that I can boot from USB or run Puppy if need be (all these entries will obviously not fit into the BURG theme I use, Lightness). The problem is, GRUB2 can't install the the beginning of a partition like it used to be able to (I am reluctant to specify andything with --force at the end), at least, without warning that warn: This is a BAD idea!. So I'm kind of at a loss here. I can't see how the folding option would work, because all of those other options would have the same icon once I unfolded (Lightness is non-text-based). If I do embed GRUB using grub-install /dev/sdax --force, how do I chainload it with BURG? Is there another way?

  Read the article

• Shared mailbox - users cannot create or view subfolders

  - by carlpett

  I've setup a shared mailbox on our Exchange 2010/SBS2011 server. I've added some users as Full permission-users on this mailbox, and when they open Outlook/login to OWA the mailbox is automatically opened. Great stuff. However, only the Inbox folder is visible, and the alternative to create a folder is grayed out. If they open the mailbox explicitly (for instance in OWA by clicking open other user's mailbox) they can see other folders, as well as create new ones. What configuration is needed to be able to view and create subfolders directly?

  Read the article

• how do you remember programming related stuff?

  - by dan leadgy

  How do you remember programming related stuff? Did you get the feeling you did encounter the error you have now a few years ago and you could swear you knew the cause but now you forgot it? Did you work with the xsl's string parsing some time ago but now you can't remember exactly which are the string functions altogether from xsl and you have to start from scratch? Or perhaps you forget about some feature from Apache Commons like "filtering a collection by some predicate" that you surely used in the past. So how do you do it? I tried having a blog but when I develop apps, I never find the time to update the blog or write about my experiences. Also, using a wiki is a nice thing but then I found it difficult to keep a clean separation between them since many times I needed to change a blog post to add new information about that topic. This made me think that I actually should have put this topic in the wiki instead of the blog. Do you have any systems that help you remember about your programming experience? What's your setup?

  Read the article

• Apache SSL losing session over load balancer

  - by SaltyNuts

  I have two physical Apache servers behind a load balancer. The load balancer was supposed to be set up so that a user would always be sent to the same physical server after the first request, to preserve sessions. This worked fine for our web apps until we added SSL to the setup. Now the user can successfully login, see the home page, but clicking on any other internal links logs the user right out. I traced the issue to the fact that while initial authentication is performed by server 1, clicking on internal links leads to having the request sent to server 2. Server 2 does not share sessions with server 1, and the user is kicked out. How can I fix it? Do I need to share sessions between the two servers? If so, could you point me to a good guide for doing this? Thanks.

  Read the article

• How can I create profiles for the windows that are open on my Mac?

  - by Kyle Hayes

  As a semi-dual monitor user on my MacBook, I run into a particular issue that drives me nuts. The scenario is at work I run my MacBook Pro's display as the secondary monitor to a dual-monitor setup. I primarily use the secondary view for my social network windows (Adium, Tweetie, Gabbble, and IRC). I position exactly as I want them to see all at the same time. However, when I disconnect my MBP to go home and reconnect to my other monitor at home, all the applications were shifted onto the main screen (since that is where they went when I disconnected the monitor before I left). With this, I have to go through the whole process again to move and position them on the secondary screen again. Is there a utility or application that will allow me to create screen/window profiles that will basically memorize the current position of all the windows and persist it to be re-instantiated later?

  Read the article

• SSIS Send Mail Task and ForceExecutionValue Error

  - by Kevin Shyr

  I tried to use the "ForcedExecutionValue" on several Send Mail Tasks and log the execution into a ExecValueVariable so that at the end of the package I can log into a table to say whether the data check is successful or not (by determine whether an email was sent out) I set up a Boolean variable that is accessible at the package level, then set up my Send Mail Task as the screenshot below with Boolean as my ForcedExecutionValueType.  When I run the package, I got the error described below. Just to make sure this is not another issue of SSIS having with Boolean type ( you also can't set variable value from xp_cmdshell of type Boolean), I used variables of types String, Int32, DateTime with the corresponding ForcedExecutionValueType.  The only way to get around this error, was to set my variable to type Object, but then when you try to get the value out later, the Object is null. I didn't spend enough time on this to see whether it's really a bug in SSIS or not, or is this just how Send Mail Task works.  Just want to log the error and will circle back on this later to narrow down the issue some more.  In the meantime, please share if you have run into the same problem.  The current workaround is to attach a script task at the end. Also, need to note 2 existing limitation: Data check needs to be done serially because every check needs to be inner join to a master table.  The master table has all the data in a single XML column and hence need to be retrieved with XQuery (a fundamental design flaw that needs to be changed) The next iteration will be to change this design into a FOR loop and pull out the checking query from a table somewhere with all the info needed for email task, but is being put to the back of the priority. Error Message: Error: 0xC001F009 at CountCheckBetweenODSAndCleanSchema: The type of the value being assigned to variable "User::WasErrorEmailEverSent" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. Error: 0xC0019001 at Send Mail Task on count mismatch: The wrapper was unable to set the value of the variable specified in the ExecutionValueVariable property.   Screenshot of my Send Mail Task setup:

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Oracle Advanced Benefits: Plan Design Maintenance for Open Enrollment

  - by Annemarie Provisero

  ADVISOR WEBCAST: Oracle Advanced Benefits: Plan Design Maintenance for Open Enrollment PRODUCT FAMILY: Oracle HCM - Benefits  July 13, 2011 at 1 pm PT, 2 pm MT, 4 pm ET This session AU gives you the information to define new and maintain all Compensation Objects used in your Benefits setup. Course highlights things to consider when getting ready for Open Enrollment or when there is a need to change compensation objects. We will review creating a new or ending an old program, plan, or option. We also review what to do when you need to move from an Unrestricted program to a Restricted one. TOPICS WILL INCLUDE: Adding or Modifying Compensation Objects Ending Compensation Objects Elements and Element Links Standard and Variable Rates Dependents and Beneficiaries Moving from Oracle Standard Benefits to Oracle Advanced Benefits A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Using PDO with MVC

  - by mister martin

  I asked this question at stackoverflow and received no response (closed as duplicate with no answer). I'm experimenting with OOP and I have the following basic MVC layout: class Model { // do database stuff } class View { public function load($filename, $data = array()) { if(!empty($data)) { extract($data); } require_once('views/header.php'); require_once("views/$filename"); require_once('views/footer.php'); } } class Controller { public $model; public $view; function __construct() { $this->model = new Model(); $this->view = new View(); // determine what page we're on $page = isset($_GET['view']) ? $_GET['view'] : 'home'; $this->display($page); } public function display($page) { switch($page) { case 'home': $this->view->load('home.php'); break; } } } These classes are brought together in my setup file: // start session session_start(); require_once('Model.php'); require_once('View.php'); require_once('Controller.php'); new Controller(); Now where do I place my database connection code and how do I pass the connection onto the model? try { $db = new PDO('mysql:host='.DB_HOST.';dbname='.DB_DATABASE.'', DB_USERNAME, DB_PASSWORD); $db->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch(PDOException $err) { die($err->getMessage()); } I've read about Dependency Injection, factories and miscellaneous other design patterns talking about keeping SQL out of the model, but it's all over my head using abstract examples. Can someone please just show me a straight-forward practical example?

  Read the article

• Failed to configure CA certificate chain

  - by kron

  Hi All, I'm trying to setup SSL on fedora with apache. In my vhost... SSLCertificateFile /your/path/to/crt.crt SSLCertificateKeyFile /your/path/to/key.key SSLCertificateChainFile /your/path/to/DigiCertCA.crt I had it working fine with a self signed key, but can't get it to work with the DigiCertCA crt. When I run service httpd restart It fails to start. This is what I get in the logs... [Sat Jan 29 07:57:13 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suex$ [Sat Jan 29 07:57:13 2011] [error] Failed to configure CA certificate chain! Any assistance would be really appreciated! Thanks

  Read the article

• Tracking Outgoing Links With Google Analytics Events

  - by the_archer

  I've been trying to track clicks on external links on my website using the events tracking method. So I've got my Google Analytics code setup before body ends as shown below (note: quotes have been entitied by blogger, but it works fine): <script type='text/javascript'> var _gaq = _gaq || []; _gaq.push([&#39;_setAccount&#39;, &#39;UA-XXXXXXX-X#39;]); _gaq.push([&#39;_trackPageview&#39;]); (function() { var ga = document.createElement(&#39;script&#39;); ga.type = &#39;text/javascript&#39;; ga.async = true; ga.src = (&#39;https:&#39; == document.location.protocol ? &#39;https://ssl&#39; : &#39;http://www&#39;) + &#39;.google-analytics.com/ga.js&#39;; var s = document.getElementsByTagName(&#39;script&#39;)[0]; s.parentNode.insertBefore(ga, s); })(); </script> Now I wanted to track a link on the addthis.com follow widget. So there is a link of the type below to which following instructions from here I added the onclick event. <a addthis:url='http://feeds.feedburner.com/myfeedburnerlurl' onClick="_gaq.push(['_trackEvent', 'Subscription Clicks', 'RSS']);" class='addthis_button_rss_follow'/> I clicked on it a couple of times, left it for over a day now, but nothing shows up in google analytics events. It just says zero events. Here's a screenshot of the events page on GA: Could anybody help me? Am I doing anything wrong?

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• CodePlex Daily Summary for Friday, October 18, 2013

  CodePlex Daily Summary for Friday, October 18, 2013Popular ReleasesVoya Media: Voya Media v. 1.2.255: Voya Media is free, open-source and provides one central place to play and organize all your music, pictures and videos. Voya Media | Twitter | Facebook | Google+ Features: Scans disk drives and network shares for valid media files. Generates playlist tags based on directory names. Supports MP3 tags and cover images. Supports built-in and external SRT/SUB subtitles. Gets TV Show episode details from the tvrage.com API. Gets Movie details from the themoviedb.org API. Supports Med...Aphid: Aphid 0.1.0.17 Alpha: Added several samples Fixed + operator bugpatterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Media Companion: Media Companion MC3.582b: New* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully visible. * Movie - Manual renaming checks if 'Use Fold...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel1: v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)Social Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyTerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationSandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixes for new version look up.New ProjectsA Program to Calculate the Sum of Two Numbers: Dennis Gaya - University of HertfordshireAllow users to change their Active Directory password from SharePoint 2013: Allow users to change their Active Directory password from SharePoint 2013 user menu contextAutoCAD Code Pack: AutoCADCodePack is a powerful library that help you to develop AutoCAD plugins using the AutoCAD .NET API.Core Engine: A game engine, written by engineers, for engineers.EmeraldForum: A simple forumFcdbas: FcdbasFreedom: ...High School Behaviour Log: A web based tool for recording student detentions, behaviour issues as well as referrals and positive behaviour. Integrated with school's SIMS.net MIS system.htmlcxx unicode version: thanks for Davi de Castro Reis and Robson Braga Ara?o's work. also thanks for Kasper Peeters 's tree.hhLets Learn DirectX 11.1 Series: Lets Learn DirectX 11.1 is a project run by Ernest Loveland to make knowledge about DirectX 11.1 development more public and freely available.Migrate CPPUnit to VS2013: migrate CPPUnit to VS2013Poll System: Poll system for educational purposePort Layer: ????????，???????R.M.B: JUST XIXIRecetas_LosBorbotones: Recetas Los BorbotonesScrolltastic-Skin: Imagine A Free DotNetNuke responsive Skin, Which Will Make Your Wishes Come True. Sharepoint and web service: This is Sharepoint 2010 project, after deploy it, you can use javascript (ajax) to access sharepoint list, call a custom web service. Everything are very easy!SourceSareProject: 00TestWebApi: WebApi serviceTFSBuildMonitor: Application that in its current shape let you monitor build queues and finished builds in an easier way than what is possible throug the built in Build ExplorerTigerProjects: This project is to create a online RSS reader similar as Google ReaderVottReader: It is project simple reader and viewer for http://vott.ru site.WinFormStudy: C#??

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >