Search Results

Search found 12848 results on 514 pages for 'multi core'.

Page 333/514 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

• Tomcat Failed to start

  - by user530158

  I have installed Tomcat on windows XP through the Tomcat installer. I have installed JDK 1.6. But when I start Tomacat from services.msi on XP, I get the following error: java.lang.ClassNotFoundException: org.apache.catalina.core.AprLifecycleListener at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at sun.misc.Launcher$ExtClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at org.apache.commons.digester.ObjectCreateRule.begin(ObjectCreateRule.java:204) at org.apache.commons.digester.Rule.begin(Rule.java:152) at org.apache.commons.digester.Digester.startElement(Digester.java:1286) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)

  Read the article

• mysql is not using multiple cpus

  - by mhost

  Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• New Servers Active Directory and Exchange

  - by user3164638

  I have 3 Dell PowerEdge server, each with 2 quad-core processors. I am going to bring this office out of the stone-age network (P2P, share files on a flash drive, emails through Google, etc) and set up Active Directory and Exchange 2013. Our needs are not that great at the moment - our staff consists of approximately 40 people, and our network may eventually be managed by an external company. We need only one domain for our emails (though we may serve emails for a few other partners domains as well). I was thinking of setting something up like this: Server 1: Primary DC. Active Directory and Exchange on separate virtual machines. Server 2: Redundant of server 1. Server 3: Shared resources, storage, backups, etc. How would you utilize 3 servers for an Active Directory / Exchange setup for a small/medium office? We do have plans to grow, so my solution must be scalable, though I'm not sure that I want to split permissions, though I'd consider it if that was something that could be changed on down the road.

  Read the article

• Apache stops serving requests when connections increase

  - by Gunjan

  The values for MaxClients, ServerLimit etc parameters are quite high (4000). Available RAM on the server is high too (~8G). Load average remains below 1 on a 24 core CPU. But when the number of visitors on the website increase apache just stops serving requests. The apache error log is blank and access log shows no more requests coming in. Restarting apache makes it work again until the number of requests increases again. Any ideas where to start looking? UPDATE Getting the below errors in apache error log on running it with LogLevel Debug [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 479 idle, and 1027 total children

  Read the article

• Boot Loop contiues [closed]

  - by user1894750

  I am facing boot loop. My backend Linux works flawlessly, But the Zygote and System server does not workout. I can still use ADB and LIVE cat .. ps show that both Zygote and system_server process are there, But boot animation remains forever !! I have : 1 Wiped Data + Cache Partition 2 System Partition has been RESTORED.. There is NO PERMISSION problem... I think that there is *problem with Zygote and System_server ..* my device: Karbonn A9+ Dual Core Snap Dragon 1.2 Ghz Ram 386MB OS : ICS 4.04 Any suggestions ??

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• Running Debian as a Virtual Machine Host

  - by Tone

  I have a need to run a linux server to host subversion, bugzilla over Apache and also act as a file and print server. I also have a need to host Windows Server 2008 virtual machines for development purposes (I'm a .NET guy). The machine I have is a dual core AMD 2.5 Ghz w/2GB RAM. So here are my questions: 1) Should I run Debian (or some other distro) as the base AND create a Debian VM to host subversion, bugzilla and be my file/print server? or is it ok to use Debian as both my VM host and for those other reasons? 2) VMWare has a free server edition, Virtual Box also is another free option. Which one of these is better suited for what I need to do? Are there any other free (or inexpensive) alternatives out there? 3) Will I need a GUI with Debian in order to manage my VMs? 4) Can I run VMs without a GUI to conserve system resources?

  Read the article

• Any reasonable UPS for a Desktop PC, just to shut it down?

  - by Michael Stum

  While I do have a surge protector to protect against overvoltage (hopefully), I have nothing against undervoltage. When a lightning storm hits, I had the lights flickering at some point. The PC continued to run, but it got me thinking of getting a UPS as a way to a) have a clean 120V/60Hz power source and b) have a way to shut down the PC in case something bad happens. I heard not all UPS' protect against power spikes, so I wonder if someone has a recommendation? It does not need to keep the PC on for a long time if the power goes out, it's good enough if it shuts down the PC after 5 minutes or so. There are 2 PCs connected. One is a Core i7-860 with a Radeon 5870 running Windows 7 Ultimate (so quite power hungry. It uses a 600W PSU but I have no measurements of the actual usage), the other one is a Windoes Home Server, running WHS/Windows Server 2003. Any recommendations in the low-price segment?

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• When computer turns on: keyboard/mouse/monitor don't work?

  - by dave

  the computer is barely good,at least i think..features Intel core 2 4 GB ram Nvidia Radeon 9600 512 mb Gigabite motherboad (the others i can't remember).. Used this computer for 3 years with no problem...The problem started one day after while it froze everything, then I shut down with removing the electricity power. A few hours later, I tried to log in to the computer but nothing moved. Nor keyboard nor mouse nor monitor worked, I was thinking that should be a delay so I left it some time. After a minute it turned off without my help around 30 seconds then it turned on automatically, but was the same problem like before and it goes again and again...any suggestions? If more info/specs required, let me know.

  Read the article

• Which motherboard for Intel i7 and how to get RAID working?

  - by jasondavis

  I am wanting to build a new PC, I have a couple questions. 1) I am wanting to go with the Intel Core i7 920 Processor, can anyone reccomend a good reliable motherboard for this processor? Graphics card support does not matter (sli-crossfire). I would like to support a lot of ram, so the more ram slots the better. I have read so many bad reviews about certain boards not working good, I would love recommendation from experience. 2) I am wanting to run a couple SSD drives in RAID-0, I have never done this, will I need to purchase anything additional to the MB and CPU and drives to get raid working?

  Read the article

• How can i simulate the production servers in my home for linux VMs [closed]

  - by user31

  I am thinking of making the small simulation of how the big companies run their system in my home environment to get the feeling. I have the server with 8GB ram , quad core processor. I am thinking of following setup if thats [possible because i have not worked with biger companies , so i want to know how can i do that I am thinking of creating 5 virtual machines VM1 will be database server and will have all databases like MySQL , postgreSQL , sqlite , mongodb and Oracle VM2 will be the web server and will have Apache and Tomcat installed VM3 will be the Filse server where i will have all the web sites file VM4 , i am thinking of as main box where i can install ptyon php java j2ee sites but not sure VM5 will have the server 22008 for c# .net applications my main idea is to be able to host the sites in php, python , java j2ee with spring Is my setup ok or i am missing few things. Please guide me with correct setup so that i can learn stuff

  Read the article

• Missing kernel on debian-testing-amd64-DVD-1

  - by Kyrol

  I want to install the Debian testing linux version. But at a certain point of the installation, an error occurs: Impossible to install kernel. a compatible kernel version is missing... … or something like that. I see that the image ISO of the DVD is less than 4GB, but is impossible that there is no compatible kernel version for the system. I have an Asus X53Sc with Intel core I7-2630QM, Geforce GT 520MX.

  Read the article

• JBoss 4.2.3 Won't Start

  - by Thody

  Hi, I'm trying to start a new installation of JBoss 4.2.3, and it's getting as far as "INFO [Server] Core system initialized", then hanging for several minutes. There is a Java process running, but only at ~35%. Also, looking at the boot.log, there are no entries after ~1s after starting the boot. Any ideas what might be up? Update: After about 10 minutes, I got a handful of garbage collection warnings: GC Warning: Repeated allocation of very large block (appr. size 512000): May lead to memory leak and poor performance.

  Read the article

• mysql is not using multiple cpus

  - by helpmhost

  Hi, Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• Is putting swapfile & temp folder in ramdisk a good idea in Windows 7 64 bit with lots of ram?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB ram in Windows 7 64bit, quad core cpu, and all apps fit in memory, will the swap file ever be used for anything? The question is about if its a good idea to put the swap file in a ram disk. Would a ram disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder in a ram disk. I know ram disk is volatile memory and I don't care about its content in it if it gets lost.

  Read the article

• Is a memory upgrade a viable option to fix performance issues? [closed]

  - by ratchet freak

  I'm currently seeing my PC getting bogged down by Firefox 11.0 alone with only one hundred tabs open. Resulting in a memory use of over 530M , VM size of over 800M and an insane amount of page faults (easily reaching 100 million over the course of the day). The PF delta during normal operation easily reaches 7k with peaks to 15k sometimes reaching over 20k. This leads to a (real) deterioration to response time when switching, opening and closing tabs, opening menus, typing, ... My question is: Am I right in assuming that plugging in more RAM (either adding 2x1GB or replacing the existing RAM with 2x2GB or 4x1GB) will solve this problem? My specs: Windows XP Home Edition SP3 (32 bit) Intel Core Duo 2,4 GHz 2x512MB RAM 800MHz DDR2 (dual channel) 4MB unified cache 320GB HDD Intel G33 (X3100) onboard graphics (no graphics card but PCI express x16 slot is available)

  Read the article

• Why are the prices for broadband bandwidth at data centers much higher than consumer/small business offerings?

  - by odemarken

  The prices for broadband bandwidth at data centers are sometimes as much as 10x higher than for a typical small business/consumer connection, at least where I live. Now, I understand those are two differend kind of products, but what exactly are the differences? Is it mainly because the bandwidth you get at a data center is guaranteed (CIR), while a consumer offer lists maximal bandwidth (EIR/MIR)? Or are there other factors as well? (Note: my previous, much more specific question on the same general topic was closed as not constructive. I tried to extract the core issue and present it in a way that can be answered objectively. If you feel that this question is still bad and should be closed, please care to comment and explain why.)

  Read the article

• Error installing SQL Server 2005 Express on AMD Turion?

  - by Angel

  Hello. Is there some compatibility problem between SQL Server 2005 Express and AMD processors? I read something along those lines on various sites, but found nothing 100% definitive. I am trying to install SQL Server 2005 Express on a computer that runs Windows Vista Home Premium, 32-bit edition, and the CPU is "AMD Turion Dual-Core RM-70". I tried both the 32-bit and 64-bit installers, just in case, and the process runs fine until the moment the service attempts to start, where it fails with the same error every time. I'm sorry I can't provide more details or the exact message, it was on a client computer to which I have no access at the moment. I hope someone could shed some light on this. Thank you.

  Read the article

• Is virtual machine slower than the underlying physical machine?

  - by Michal Illich

  This question is quite general, but most specifically I'm interested in knowing if virtual machine running Ubuntu Enterprise Cloud will be any slower than the same physical machine without any virtualization. How much (1%, 5%, 10%)? Did anyone measure performance difference of web server or db server (virtual VS physical)? If it depends on configuration, let's imagine two quad core processors, 12 GB of memory and a bunch of SSD disks, running 64-bit ubuntu enterprise server. On top of that, just 1 virtual machine allowed to use all resources available.

  Read the article

• Which modules can be disabled in apache2.4 on windows

  - by j0h

  I have an Apache 2.4 webserver running on Windows. I am looking into system hardening and the config file httpd.conf. There are numerous load modules and I am wondering which modules I can safely disable for performance and / or security improvements. Some examples of things I would think I can disable are: LoadModule cgi_module others like LoadModule rewrite_module LoadModule version_module LoadModule proxy_module LoadModule setenvif_module I am not so sure they can be disabled. I am running php5 as a scripting engine, with no databases, and that is it. My loaded modules are: core mod_win32 mpm_winnt http_core mod_so mod_access_compat mod_actions mod_alias mod_allowmethods mod_asis mod_auth_basic mod_authn_core mod_authn_file mod_authz_core mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_cache_disk mod_mime mod_negotiation mod_proxy mod_proxy_ajp mod_rewrite mod_setenvif mod_socache_shmcb mod_ssl mod_status mod_version mod_php5

  Read the article

• Hyper-V: determine the guest's name given the GUID

  - by syneticon-dj

  How would I go about determining the guest's name given its GUID or vice-versa, preferably with only the Hyper-V/Server Core stock install at hands? Rationale: I am in favor of having a repository of dirty tricks to revert to when in great need. To immediately quiesce all (storage) operations of a VM guest without losing the state, I used to run kill 17 <all VM's virtual processes> (signaling SIGSTOP) and resumed afterwards using kill 19 <all VM's virtual processes> (signaling SIGCONT) in ESXi/vSphere shell. I tried the same technique with Hyper-V using Process Explorer's "Suspend" functionality on the vmwp.exe processes and it seemed to work. I have yet to find a way for easily identifying the processes to suspend, though - the vmwp command line is only listing a GUID.

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >