Search Results

Search found 21141 results on 846 pages for 'old mac'.

Page 333/846 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• SSD/HDD not exceeding 120 MB/s

  - by skiwi

  SO here is the situation: First this was my old PC, it had a 2x 1TB RAID 0 and a Corsair Force 3 SSD in it. This were the old speeds, measured by HDTune Pro. 2x 1TB RAID 0: Corsair Force 3 SSD Then my dad got my PC and we had several issues, in the end turned out both RAID and SSD controller were malfunctioning causing BlueScreens on 100% load. Removed the RAID 0, but leaving the HDD's intact and bought an Samsung 840 EVO 120GB, though the Corsair SSD is still in the system, just not as sytem disk anymore. 1TB HDD (one of them): Corsair SSD: Samsung SSD: We did not assemble the PC ourselves, so answering some technical questions might be more difficult, though we will do our best. First thing we noticed is that the Samsung 840 EVO is no where reaching it's advertised speed, even an Samsung 840 250GB (non-EVO) is reaching 350 MB/s in my own PC. Then we noticed that both SSD's are capped at 120 MB/s exactly, not sure if this is being caused by HDTune Pro, but very unlikely. And even worse, the Corsair Forza 3 was running faster before the system got reassembled. Does anyone have any clue what is going on?

  Read the article

• Reconnecting OST with Exchange

  - by syrenity

  Hi. I have a quite big problem with customer's MS Exchange. The server got it's disk filled about 2 weeks ago, so it's currently offline. They plan to upgrade it, but not in hurry, as they use it mainly for OWA and back-up - the mails exchange is done via SMTP and POP3. Trying to diagnose some problem today, one of the users has (following the ISP instructions), removed the Exchange account from Outlook, which essentially left the OST orphaned. The user naturally didn't move the emails or any other data to the Archive / PST before, so these emails located on the OST only. So currently I'm trying to figure out how to restore them. There are 2 options: 1) Make the user buy some tool to convert them to PST, and import as archive / main Outlok file? 2) Reconnect the Outlook to Exchange (once it up), let it sync the old server content, then shutdown Outlook and replace the new OST with the old one, start Outlook again in offline mode and move these files to archive. 3) Any other method? Can someone advice what would be the best approach here? The used versions are Outlook 2007 and Exchange 2003. Thanks!

  Read the article

• Am I getting the right memory for my motherboard?

  - by Daniel Carvalho

  Hi technophiles; I have a Gigabyte GA-EP45-DS motherboard. Also, the memory that came with my computer was two Transcend aXe RAM 1066MHZ 1GB modules. The thing is, I noticed that my motherboard has "DDR2 1200" written on it. This concerns me, have I bought slower memory than my computer is supposed to have ideally? Now, I'm not super concerned at a granular level about the best optimal RAM with the best CAS latency etc... but I do hope at least that I've got the right speed. Now, as far as I know, there is no such thing as ram at 1200MHZ? Am I right? You see, because I'm thinking of getting more RAM now, before I can't find the same type or speed any-more and just want to make sure it's the right thing. Furthermore, if the memory is slower than what I should be getting for my motherboard, what RAM should I be getting, and will that new RAM play nice with my old RAM? If I get new RAM at a different speed, would it be better / more beneficial performance-wise to omit the old RAM because of how the whole DUAL channel RAM thing works? I'm not too clued up on this area. Thanks chiefs.

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• Internet Explorer will not open

  - by KCotreau

  I recently migrated a company to a Microsoft domain environment, logged the users in under their new domain accounts, and then copied the old profiles to the new profile. I am not sure if that is related since they did not complain about it right away and it may have been a subsequent patch or something, but I have two XP computers that will not open IE8. You click on it, and it nothing graphically happens at all, but you can see a process in task manager. If you click many times, you get multiple instances. It will appear often TWICE per click. It still works in the old profile, so it is specific to the profile, and I would like to fix it rather than blow it away. Here is what I have done without success: Tried opening without add-ons (the one in System Tools) Reinstalled IE8 Ran SFC /SCANNOW I found a script that was supposed to repair any registry entries, and ran it. I tried exporting the whole HKCU\Software\Microsoft\Internet Explorer key and deleting it, hoping that when I restarted it, it would recreate it...No joy. I restored it. Any ideas?

  Read the article

• Missing access log for virtual host on Plesk

  - by Cummander Checkov

  For some reason i don't understand, after creating a new virtual host / domain in Plesk a few months back, i cannot seem to find the access log. I noticed this when running /usr/local/psa/admin/sbin/statistics The host in question is being scanned Main HTML page is 'awstats.<hostname_masked>-http.html'. Create/Update database for config "/opt/psa/etc/awstats/awstats.<hostname_masked>.com-https.conf" by AWStats version 6.95 (build 1.943) From data in log file "-"... Phase 1 : First bypass old records, searching new record... Searching new records from beginning of log file... Jumped lines in file: 0 Parsed lines in file: 0 Found 0 dropped records, Found 0 corrupted records, Found 0 old records, Found 0 new qualified records. So basically no access logs have been parsed/found. I then went on to check if i could find the log myself. I looked in /var/www/vhosts/<hostname_masked>.com/statistics/logs but all i find is error_log Does anybody know what is wrong here and perhaps how i could fix this? Note: in the <hostname_masked>.com/conf/ folder i keep a custom vhost.conf file, which however contains only some rewrite conditions plus a directory statement that contains php_admin_flag and php_admin_value settings. None of them are related to logging though.

  Read the article

• 802.11g -> wired ethernet bridging not working

  - by Malachi

  Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• Firefox cannot render icons from Font Awesome webfont set

  - by ADTC

  In Firefox (Windows 7), icons and glyphs that are called from the Font Awesome package do not render properly. An example of this can be seen on the Khan Academy website. Below the video the icons are shown as boxes with hex codes in them. This means that it isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I found this question on Stack Overflow that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However, I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. I've already tried manually downloading the font and adding it to Windows' Fonts folder but this does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

  Read the article

• Google Contacts/Calendars + Address Book + iCal: built-in sync (problems) or Exchange sync?

  - by jtbandes

  (I've looked at a few other questions related to this, but I've only found old questions with people saying that they're having problems, or anticipating Snow Leopard fixing them; no recent updates.) I'm looking to sync my Google Contacts & Calendars, and Gmail, with my Mac & iPhone. The iPhone I have currently set up thus: IMAP for Mail Exchange (Google Sync) for Contacts & Calendars The Mac: Address Book: built-in sync iCal: CalDAV, configured as a Google account I haven't been syncing Gmail to Apple Mail, because I was having weird IMAP glitches every so often that just got to annoying. Will Exchange / Google Sync work for this at all? Any suggestions there? Here are the other problems I'm having. Address Book only syncs certain fields (for example, Birthdays don't sync at all). I believe this is a list of the information that's synced. Address Book's "Synchronize with Google" checkbox doesn't stay checked when I quit Address Book. I think iCal is working fine, for the most part. Any suggestions on how to improve this setup? Why doesn't Address Book / Google Contacts sync stay enabled? Could I use Exchange for it like I am on the iPhone? Will that sync all the fields, including Birthdays, etc.? Thanks in advance!

  Read the article

• Very high-pitched noise when computer does something intense?

  - by Starkers

  "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

  Read the article

• Application for time and project management

  - by user10826

  I want to improve the way I organize my projects/tasks/schedule What I do now is: keep an excel sheet with the name of the most important tasks/projects, I look at it at the beginning of each day and decide the ones I will focus on on iCal I write down events for each day, or for a concrete time (13 to 14 hours). I set up each day the tasks I want to accomlish, and allocate them hours I use Things (culture code) to keep info about tasks and projects not very important and which are not time allocated yet (GTD name = someday) I use Mail on Mac and create folders for the mails I want to process with the name of the different projects I save the main info for each project on freemind maps My system works well at the moment but it is pretty complicated to use. I want to make it better and I am looking for something with these requirements: must be 100% offline accessable it should use as less programs/resources as possible, ideally just one program should be able to manage all my info I can use the GTD methodology mixed with priorities and I can allocate each task converted to event on my calendar I can have different daily/weekly, etc views on a calendar to see the "big picture" must run on mac os x leopard price does not matter, I will pay for this So, according to your experience, can you recommend me something like this? Thanks

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• Downmix surround to Dolby Pro-Logic at the OS/driver level in Windows 7?

  - by davr

  First off, I'm talking about Dolby Pro-Logic, a really old tech for encoding 4 audio channels (L/R/C/SR) into two analog outputs, and then extracting them again. It was used in surround sound systems in the last century. I have a modern PC that can output 5.1 analog audio (Three outputs on the back carry six channels of audio). But I have a really old surround sound reciever that only has a two-channel, L/R input, which it extracts 4 channels of audio from, and outputs to 5.1 speakers. What I want is some way for the OS, Windows 7, to act as if I really had 5.1 audio channels available, so applications produce surround audio, but before outputting it out of the back of my PC, apply Dolby Pro-Logic matrix encoding so that it outputs over only two channels. These two channels would then get sent to my receiver via a RCA cable, which would decode it again and drive the surround speakers. Is anything like this possible? I'm pretty sure I could do it at an application / codec level, but I'm looking for something that I just have to set once.

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

• Disable RAID to JBOD in server IBM x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• How to access previous VHD versions of system backup?

  - by feklee

  Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

  Read the article

• Hibernate between OS X and Bootcamp Win 7

  - by Willem

  Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

  Read the article

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• What is the recommended glusterFS configuration for a growing website?

  - by montana

  Hello, I have a website that is tracking towards 50 million hits per day average, and within the next 3 months should be over 100 million hits per day. We are trying to use GlusterFS v 3.0.0 (with latest patches as of 1-17-2010) Currently, we've just upgraded to a load balancer environment that has 3 physical hosts with 6 Xen-Server 5.5u1 VM's (2 on each host) to serve webpage traffic. Each machine has 6 Raid-6 local storage drives (7200RPM-SATA). The old machine we came from had 1 mirrored SAS 10k drive. We also set up glusterFS currently with 3 bricks, one on each host, and it is serving the 6 VM's as clients. In testing, everything seemed fine. However when we went to production, it seemed that there just wasn't enough I/O's available to serve traffic even upwards of 15mil hits. Weeks prior, our old server was able to handle traffic, maxed out, at 20mil. Is there any recommended configurations for such an application, or things to be aware of that isn't apparent with their documentation at gluster.org for a site our size?

  Read the article

• I deployed Flash Player via a Software Installation policy. How to upgrade?

  - by eleven81

  I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

  Read the article

• Someone used or hacked my computer to commit a crime? what defense do I have?

  - by srguws

  Hello, I need IMMEDIATE Help on a computer crime that I was arrested for. It may involve my computer, my ip, and my ex-girlfriend being the true criminal. The police do not tell you much they are very vague. I was charged though! So my questions are: -If someone did use my computer at my house and business and post a rude craigslist ad about a friend of my girlfriend at the time from a fake email address, how can I be the ONLY one as a suspect. Also how can I be charged. I noticed the last few days there are many ways to use other peoples computers, connections, etc. Here are a few things I found: You can steal or illegally use an ip addresss or mac address. Dynamic Ip is less secure and more vulnerable than static. People can sidejack and spoof your Mac, Ip, etc. There is another thing called arp spoofing. I am sure this is more things, but how can I prove that this happened to me or didnt happen to me. -The police contacted Craigslist, the victim, aol, and the two isp companies. They say they traced the IP's to my business and my home. My ex was who I lived with and had a business with has access to the computers and the keys to bothe buildings. My brother also lives and works with me. My business has many teenagers who use the computer and wifi. My brother is a college kid and also has friends over the house and they use the computer freely. So how can they say it was me because of an angry ex girlfriend.

  Read the article

• Burners freezing the PC when starting lead write in

  - by steve

  hi guys ,am having trouble with new pioneer dvdr-219l dual layer burners ,have replaced old burners with these dual layer ones . they are sata attached ,have tried img burn, xbox360 cookie burner, dvd decrypter, dvd flick , the burners seem ok burning cd and normal dvds but when trying to burn an iso to dual layer they will both freeze at the lead in write , the pc freezes including alt/delete mouse etc so have to re-boot,have tried uninstalling all burning programs that i have to eliminate conflicts and re-installing 1 at a time to see if that was the problem , still no solution am starting to think that maybe i have a bad sata cable the pc and burners dont seem to talk to each other when trying to burn dual layer ,any suggestions ???? this problem is giving me the shits ,ran microsofts fix it program and it said i had no burners installed that were capable of burning , i have had a look at device manager and the burners are there and when trouble shooted it says they are working ok , have noticed in device manager that the driver for these burners is from B.H.A.corporation file version 8.0.0.5. copyright 2000-2006 and they are not digitally sighned these burners are the latest models so how com the drivers are so old ...help please . steve

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >