Search Results

Search found 13835 results on 554 pages for 'custom modelbinder'.

Page 334/554 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

  - by Wuinny

  I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that I have to upgrade my drivers to play the game. So I did it. But since I did a clean install of the new Nvidia drivers, I just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers I was able to create custom resolution (1184*740) in Nvidia control panel but now when I try it tells me that "my monitor cannot support this resolution". When I insist, it works but soon as I shut down my computer I have to recreate it.. Do anyone have a fix?

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• How can I open a port in OS X 10.6?

  - by Ian

  Mine is MacBook Air, so I cannot plug to the modem directly. And I do want to turn my firewall off. How can I specify to open a port, like port 56789 in Mac OS 10.6.8? I know in old Mac OS, there is a option for me to specify a custom port. But I cannot find it in OS X 10.6.8. In System Preferences / Security / Firewall, I only can allow an APPLICATION to access a new port. However, now I'm programming, using a new port. So, it seems not suitable for me. So, can I simply open a port instead of using an Application to open a port?

  Read the article

• Do TCP/UDP connections add to the Windows incoming connection limit?

  - by user47899

  Hi all, I've tried to figure out what Microsoft means by "Windows sockets" and it all seems very vague. Basically we have customers that sometimes try to set up workgroups with close to 10 Windows XP computers with drive and printer shares and we're worried that some of the non-Windows Ethernet devices on the network will cause issues with the inbound connection limit outlined here where only 10 inbound connections can be active at one time. For example, there is an Ethernet Caller ID device that broadcasts UDP packets to all computers, and a kitchen display system that likewise broadcasts UDP. They may also have incoming TCP packets for our custom online ordering module. Do these TCP/UDP connections count toward the inbound connection limit? I'm aware that Windows 7 has increased the limit to 20 but we might have future customers that will push that limit. Thanks in advance

  Read the article

• how to switch played music when someone enters

  - by ymajoros

  My wife has a small shop, and she plays free licensed music. She can't legally play her own music when people outside of the family circle are present in the shop. How can I automatically switch music when someone enters? I was thinking of some bluetooth door detector and some custom software, but can't seem to find either. I'm a software architect/dev and can write it if necessary, but I'd prefer to use some existing solution. Any ideas on good hardware and software for this?

  Read the article

• Disable modsec2 blacklist rule for specific hostname

  - by KevinL

  I have a server running Apache2 with mod_security2. In modsec2.user.conf, there is a blacklist rule: ###BLACKLIST### SecRule REQUEST_URI "mkdir" I need to disable that rule for just one hostname on the server. I realize I could just remove it entirely but I'd rather keep it on for the other sites. I realize you can use the SecRuleRemoveByID directive, based on each rule's ID, but as you can see above, this has no ID, it's just a string. How do I disable that rule for just www.example.com, is there something I can do in custom.conf, whitelist.conf or exclude.conf ?

  Read the article

• Free batch image watermarking software

  - by Blade

  Hi everyone. I'm looking for a simple yet effective software to watermark a lot of photos in batch. I have to apply a transparent png watermark image on 400 photos. The program have to place the watermark at a custom position relative to the bottom right corner of every picture. I would have done this in photoshop, but the scriptable action doesn't allow me to do conditionnal placing if the photo is portrait or landscape. I'm looking for a free lightweigh program. Thank you !

  Read the article

• Is it necessary to change the default users and groups in VMware esxi 4.0 in order to have a secure

  - by Teevus

  By default esxi creates a number of users and groups including: daemon nfsnobody root nobody vimuser dcui How secure is this default security setup? Besides changing the root password, is it advisable to modify the default users and groups? E.g. does esxi use default passwords for the accounts or anything else that could be exploited by malicious users? My scenario is very basic and I don't require any custom users or groups as only sysadmins will ever need to administer the virtual infrastructure, and they can do so using the root account. Thanks

  Read the article

• List all documents (webparts) and sites using a certain solution in sharepoint 2007

  - by tnolan

  I would like to uninstall a Sharepoint application template (GroupBoard Workspace to be exact) but I want to make sure nothing currently relies on it. I don't see any functions within stsadm that will tell me this information and I have even tried SPM which would work, but with such a huge site it's tedious to go through every single web and page to see which features are in use. Is there a way (probably with SQL using the id from stsadm -o enumsolutions) to list everything that relies on a template within a given solution, including webparts on custom pages? If this is not possible, what is the best way to check dependencies prior to uninstalling a solution (especially since GBW is not the only one on my axe list.) Note: I know that stsadm -o deletesolution will stop me from removing something that is in use, but I want to see all of the things that are using a given solution.

  Read the article

• Redirecting HTTP traffic from a local server on the web

  - by MrJackV

  Here is the situation: I have a webserver (let's call it C1) that is running an apache/php server and it is port forwarded so that I can access it anywhere. However there is another computer within the webserver LAN that has a apache server too (let's call it C2). I cannot change the port forwarding nor I can change the apache server (a.k.a. install custom modules). My question is: is there a way to access C2 within a directory of C1? (e.g. going to www.website.org/random_dir will allow me to browse the root of C2 apache server.) I am trying to change as little as possible of the config/other (e.g. activating modules etc.) Is there a possible solution? Thanks in advance.

  Read the article

• Postfix cleanup daemon access control

  - by Flimzy

  Is there any way to control which hosts are permitted to connect to the cleanup daemon over TCP? Our 'master.cf' contains: 2526 inet n - - - 0 cleanup This is necessary because we have a cluster of SMTP servers running custom code, and they can all inject mail to the centralized postfix server via the cleanup daemon. However, we want to allow only our authorized servers to connect to the cleanup daemon. The current configuration allows any host to connect to port 2526. Clearly we can use iptables to restrict access, but is there a way to do this within postfix itself?

  Read the article

• Error page for OWA users on a different server?

  - by W_P

  We are getting ready to do a network-wide upgrade to Exchange 2010. The url for the old 2007 mailboxes is at https://mail.example.com and users who have had their mail box moved will have to go to https://Email.example.com If a user that has a 2010 mailbox attempts to login at the 2007 OWA location, they get a standard 403 Forbidden page. We would like to show them a page of our own making, that includes a link to the 2010 OWA login page. I assumed we could do this with an IIS Custom Error page, but setting the 403.4 error page in IIS on the Default web site doesn't seem to be working. Does anyone know how we could get around this? BTW, our OWA for the 2007 boxes in on Windows Server 2003, and IIS 6

  Read the article

• Duplicate of IPSEC certificate template not displaying

  - by Tim Brigham

  I am working on getting IPSEC working on computers outside my domain. I am unable to get a duplicate of the IPSec Offline Request template to show on the web interface. My CA is 2008 R2 Enterprise and the permissions on the template should be adequate to allow me access (my account has read and enroll). If I publish the original template it functions as desired. I also have other custom templates in use (although using autoenrollment). The duplicate is almost identical to the original, excepting that it has a longer validity period and the private key is marked as exportable. How do I debug at this point?

  Read the article

• Textmate: Find and replace across project with contents of one file from said project

  - by griotspeak

  I have a regular expression to find the text I want (I wrapped the relevant section in custom tags), and I can do it by hand without much issue, but what I want is a way to automatically find and replace throughout the entire project. A macro seems like an OK idea, but it would be nice to have a command (to edit and tweak). sed seems like a good bet, but I am pretty unfamiliar with it. I am not so much asking for a complete solution as I am asking for an example that does something close to what I want. I don't really know of a good way to start.

  Read the article

• Windows 7 boot error

  - by jason

  I am running windows 7 professional, everything was working fine until I installed a software driver clearner suggested by nvidia customer service and I cleaned only nvidia graphic driver installation since then my windows does not work at all. I can access everything from startup repair, did lots of time repair but nothing happened. System restore does not work it says c: drive is not available, its 100% there and I can access every file from command prompt. Almost two days passed and I applied every solution discussed on several forums, now only thing left is either install fresh windows (Which i really don't want to do) or update windows (which windows does not let me to do, it says I have to update it from windows) My question is there any way to update (not fresh/custom installation) windows from command prompt? P.s: Safe mode, safe mode command nothing works except startup repair option. I ran sfc /scannow no problem found. I also removed all attached hardwares. Any help would be greatly appreciated.

  Read the article

• APC on PHP 5.4 does not seem to be installed after installation

  - by Burning the Codeigniter

  I've recently upgraded to PHP 5.4 from 5.3.6, I did the command apt-get upgrade php5 with the custom PHP 5.4 repo which I added to the apt-get repositories, now that I upgraded, I restarted php-fastcgi and php5-fpm the APC does not seem to be installed with it after I did pecl install apc it seems to configure and install with the details below: Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 But in my phpinfo() I get this: PHP API 20100412 PHP Extension 20100525 Zend Extension 220100525 Which I don't understand, how can I configure PECL to install with PHP 5.4 with my version, my installation with apc.so is stored to /usr/lib/php5/20090626/ however in /usr/lib/php5/ I have two PHP versions: 20090626 20100525 How can I remove either one and leave PHP 5.4 and manage it to install apc in the correct PHP version? I'm running Ubuntu 11.04 on my server. I need help on this please.

  Read the article

• macports apache,php,db, how do I test on another device?

  - by brokenindexfinger

  My supervisor suggests using macports to install/manage different versions of apache and php, as well as both mysql and posgres databases. The idea is that we need to test our platform on different versions of each. So far I've just been using the default apache installation on osx lion, and the default postgres installation. My question is this: once I turn Web Sharing off, and proceed with a custom apache2 setup based in /opt/local/, how do I broadcast my machine's IP to other devices, for testing? With Web Sharing, I can get my machine's IP and use that to test with an iPad and iPhone. Will that still be the case, and if so, how do I do it?

  Read the article

• Apache log lines contain "..."

  - by mtah

  We have a custom log line format for Apache logs which are analyzed. CustomLog "|/usr/sbin/rotatelogs -l /mnt/var/log/apache2/access-%Y%m%d%H%M%S.log 900" "%a %{%s}t \"%r\"" However, some log lines are mysteriously shortened with "..." for some reason, but how can this be? The shortest length line discovered where this occurs is 317 chars while the longest line is way over 2000 chars. "GET /exposure?sg=&ap=0x0&fv=WIN%2010,0,22,87&si=IH95VDUAVLJ0&pt=Lage%20hjemmelaget%20sengegavl%20-%20Forum%20-%20Diskusjon.no&iv=0&sd=1024x600&ct=680&tz=-120&eu=http%3A//www.diskusjon.no/index.php%3Fshowtopic%3D1011139&l...AS3&an=NO%20-%20180x500%20Pretail%20CPC&wd=1024x483&rf=http%3A//www.google.no/search%3Fhl%3Dno%26source%3Dhp%26q%3Dsengegavl+lage%26meta%3D%26aq%3D2%26aqi%3Dg10%26aql%3D%26oq%3Dsengega%26gs_rfai%3D&ui=3INYF5QAZL10&ws=0x417&ad=180x500&sa= HTTP/1.1"

  Read the article

• Cannot assign multi-line values to CustomAttributes with Set-Mailbox

  - by Biglig

  A colleague is implementing an application that generates signatures and publishes them to Outlook. It would be useful to him if I could store a multi-line string for each user in Active-Directory. Using one of the Custom-Attributes seems obvious, but if I try set-mailbox biglig -CustomAtribute1 "First Line``r``n Second Line" then CustomAttribute1 gets set to "FirstLineSecondLine" and looses the breaks. However, the same syntax works fine when I set e.g. StreetAddress or Notes. Of course, those are changed with set-user rather than set-mailbox. According to Technet's reference for set-user and set-mailbox, The CustomAttributes, StreetAddress, and Notes all take a system.string as their value. Is it just the case that some attributes accept multi-line strings and some don't? If so, can anyone suggest a workaround?

  Read the article

• Program that converts Windows 7 install files into iso

  - by Stephen R

  I recently got to build a custom image of Windows 7 and I can successfully install it on other computers. The problem I have is right now I have to do the installs from a bootable hard drive. I would much rather do this from a disk or ISO. I know there is a program that will take the Windows 7 system files and convert it to ISO image, but I can't think of it. Otherwise, could I just simply burn the files to a DVD? Would that work?

  Read the article

• Sharepoint managed Properties

  - by paulie

  Originally posted on StackOverflow, and edited for clarity I have a custom Content Type inside a list that has over 30 items (Which were uploaded via DockIt), and I have added several "managed properties" to the "crawled properties", in the SSP. All of them work except 1. The column "Synopsis" is a multiline field with no limit on it's length. It appears as a crawled property "Synopsis", and is mapped to a managed property 'asynop'. On the 'Advanced Search Page', it is added as a property and searchable, however it only returns a some matching records (if any). I manually created an entry, ran the crawl and was able to search for it. I edited an existing entry, ran the crawl (full and incremental), and it still only returned the manually entered entry. If I entered the search term in the Search box directly "asynop:fatigue", then all the correct results appear. Why is this happening? And could it please stop?

  Read the article

• How to edit the Boot Graphics Resource Table / Edit windows 8 BOOT LOGO?

  - by user144773

  I want to edit the screen which is displayed when windows 8 (starts) loads (/loading). As for now it has the Toshiba logo, I want my custom logo or the windows default logo. I have found that UEFI has something called "Boot Graphics Resource Table" and that it overides the default logo if there is a image present (source) How can I edit the logo stored in UEFI firmware or Boot Graphics Resource Table? if it's in the "bootres.dll", which does UEFI use? My disk (spread across a few system/usefi/windows/etc partitions) has around twenty bootres.dlls. The bootres.dll is signed by Microsoft, but I don't have to worry because I can sign the file I edit myself with my own certificate.

  Read the article

• Windows 8.1 wants to format a USB stick with an unusual but valid GPT partitioning scheme, why?

  - by DonGar

  I have a USB stick formatted with GPT partitions. Some of the partitions are ext2, some are ext4, some are custom and funky. However, there is also a standard EFI partition, and a standard vfat partition. In Windows 7, both the EFI partition and the standard VFAT partition are visible and mount normally. But Windows 8.1 prompts to reformat the drive when it's inserted. I'm not surprised if Win 8 hides the EFI partition, but I didn't expect it to prompt for reformatting. I want to leave existing partitions alone, but have a VFAT partition that Windows 7, 8, and 8.1 will mount and display normally. Exactly how does Win 8 decide if a device needs to be formatted?

  Read the article

• reaching 99.9999% uptime

  - by christopher-mccann

  I am currently developing a project which is mission-critical. The actual domain name is registered with 1 & 1 and I plan on purchasing DynDNS Custom DNS service (which has 5 different geographical locations for DNS) and then another secondary DNS service to make sure my DNS is as failover safe as possible. Does it matter that the registration is with 1 & 1 - are they a weak link in the chain? All I really use them for is to say that DynDNS is my primary DNS nameserver and then my secondary DNS is my other nameserver. I can transfer the registration to DynDNS - Im just not sure if it really matters or not. Thanks

  Read the article

• How do I stop my IIS App Pool making a request to wpad.mydomain.com?

  - by Programming Hero

  As part of some performance troubleshooting, I've monitored the slow startup of a "cold" App Pool (one without an active worker process) in IIS. When using a built-in account, the App Pool starts in sub-second time. When using a custom local account the App Pool takes 30+ seconds to start processing requests. The service appears to be making requests to wpad.mydomain.com, an address it does not have access to, which causes it to wait 30 seconds for a response before eventually timing out. As a workaround, I've added the hostname to the server's hosts file, to direct the traffic to the local machine, which returns much faster (1-2 seconds). What do I need to do to stop IIS making this request when this identity is used for the App Pool?

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >