Search Results

Search found 24334 results on 974 pages for 'directory loop'.

Page 334/974 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

  • Publishing my Website to my Local Disk Causes Exceptions to show Paths including my Local Disk

    - by coffeeaddict
    I've published my website many times. But didn't think about this though until I came across this issue. So I decided to publish my WAP project to a local folder on my C drive first. Then used FTP to upload it to my shared host on discountasp.net. I noticed during runtime that the stack trace was referencing that local folder still and erroring out. Anyone know what config settings are affected when publishing? Obviously something is still pointing to my local C drive and I've searched my entire solution and don't see why. Here's the runtime error I get when my code tries to run in discountasp.net's web server Cannot write into the public directory - check permissions Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: ScrewTurn.Wiki.PluginFramework.InvalidConfigurationException: Cannot write into the public directory - check permissions Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [InvalidConfigurationException: Cannot write into the public directory - check permissions] ScrewTurn.Wiki.SettingsStorageProvider.Init(IHostV30 host, String config) in C:\www\Wiki\Screwturn3_0_2_509\Core\SettingsStorageProvider.cs:90 ScrewTurn.Wiki.StartupTools.Startup() in C:\www\Wiki\Screwturn3_0_2_509\Core\StartupTools.cs:69 ScrewTurn.Wiki.Global.Application_BeginRequest(Object sender, EventArgs e) in C:\www\Wiki\Screwturn3_0_2_509\WebApplication\Global.asax.cs:29 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +68 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75 Discountasp says it's not a permission issue but obviously it is. I think /Wiki should work...but it's not. Here's my site viewed in FTP on discountasp.net's server:

    Read the article

  • Boost::Asio : io_service.run() vs poll() or how do I integrate boost::asio in mainloop

    - by user300713
    Hi, I am currently trying to use boost::asio for some simple tcp networking for the first time, and I allready came across something I am not really sure how to deal with. As far as I understand io_service.run() method is basically a loop which runs until there is nothing more left to do, which means it will run until I release my little server object. Since I allready got some sort of mainloop set up, I would rather like tp update the networking loop manually from there just for the sake of simplicity, and I think io_service.poll() would do what I want, sort of like this: void myApplication::update() { myIoService.poll(); //do other stuff } This seems to work, but I am still wondering if there is a drawback from this method since that does not seem to be the common way to deal with boost::asios io services. Is this a valid approach or should I rather use io_service.run() in a non blocking extra thread?

    Read the article

  • Proper way to set PYTHONPATH (including precedence)

    - by Wells
    In .bashrc I have: export PYTHONPATH=/home/wells/py-mlb I've verified this is actually being set. so, in this directory is another directory called 'py_mlb'- the actual module. So I go python -v and then import py_mlb but it does: >>> import py_mlb import py_mlb # directory /usr/local/lib/python2.6/dist-packages/py_mlb Then I do import sys and print sys.path and I see: >>> print sys.path ['', '/usr/local/lib/python2.6/dist-packages/python_memcached-1.44-py2.6.egg', '/usr/local/lib/python2.6/dist-packages/pymc-2.1alpha-py2.6-linux-i686.egg', '/usr/local/lib/python2.6/dist-packages/nose-0.11.1-py2.6.egg', '/home/wells/py-mlb', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/usr/lib/python2.6/lib-dynload', '/usr/lib/python2.6/dist-packages', '/usr/local/lib/python2.6/dev-packages', '/usr/lib/pymodules/python2.6', '/usr/lib/pymodules/python2.6/gtk-2.0', '/usr/local/lib/python2.6/dist-packages'] So my path from .bashrc IS in there, and from the look of it it's even before dist-packages but it's importing the module from dist-packages. How can I finagle this so the PYTHONPATH as defined by .bashrc takes precedence? Thanks!

    Read the article

  • .NET Thread Pool - Unresponsive WinForms UI

    - by Goober
    Scenario I have a Windows Forms Application. Inside the main form there is a loop that iterates around 3000 times, Creating a new instance of a class on a new thread to perform some calculations. Bearing in mind that this setup uses a Thread Pool, the UI does stay responsive when there are only around 100 iterations of this loop (100 Assets to process). But as soon as this number begins to increase heavily, the UI locks up into eggtimer mode and the thus the log that is writing out to the listbox on the form becomes unreadable. Question Am I right in thinking that the best way around this is to use a Background Worker? And is the UI locking up because even though I'm using lots of different threads (for speed), the UI itself is not on its own separate thread? Suggested Implementations greatly appreciated.

    Read the article

  • Apache rewrite rules redux

    - by AlexanderJohannesen
    I've got a REST framework that when plopped into any directory should Just Work(TM), and it seems to work fine when I've got projects in subdirectories, but not if it's in root. So, given a few example directories; / /project1 /bingo/project2 /hoopla/doopla/minor/project3 All of these works fine, except I'm getting "funnies"* when the project runs in the root directory (bit hard to explain, I suppose, but the second level rewrites are not working properly). Here's my attempt at a generic .htaccess file: RewriteEngine On RewriteRule ^static/ - [L] RewriteCond %{REQUEST_URI} ^$ RewriteRule .* ./ [R,L] RewriteRule ^index.php - [L] RewriteRule (.*) index.php?q=$1 [QSA,PT] (And yes, all projects have a subdirectory ./static which is ignored by rewrites) What I'm trying to achieve is a set of rewrite rules that work for most cases (which is, again, plonking the project in a directory the webserver serves). I'm not a rewrite rules wiz by a long shot, and any good advice and gotchas would be appreciated (and yes, I've gone through too many introductory articles. I need some serious juice.) More info on the funnies; my webserver has docroot in one spot (under /usr/share/apache2/default-site/), but a set of rules that says that /projects is pulled in from somewhere else that's not a subdirectory of docroot (/home/user/Projects/). When I go there, I get a list of /projects subdirectories, and if one of those subdirectories gets called (restmapp) with the proposed rewrite rules, I get ; The requested URL /home/user/Projects/restmapp/index.php was not found on this server.

    Read the article

  • .NET load assembly error metabase config

    - by peter
    Hi, Yesterday I found out that the mailroot directory had moved to a different location on the C drive. I don't know how this happened as no configs were changed, using IIS7 with IIS6 SMTP service on Windows 2008 R2 web edition. I wanted to restore it to the default c:\inetpub\mailroot location. So I opened system32/inetsrv/MetaBase.xml, and in the node was the problem, BadMailDirectory, DropDirectory etc were all pointing to the wrong location... I changed them back to the default c:\inetpub\mailroot. Later I discovered an ASP.NET application was throwing this error: An error occurred in the Microsoft .NET Framework while trying to load assembly id 1. The server may be running out of resources, or the assembly may not be trusted with PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check documentation to see how to solve the assembly trust issues. For more information about this error: System.IO.FileNotFoundException: Could not load file or assembly 'microsoft.sqlserver.types, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I figured it had to do with my changes to the mailroot locations, so I gave ASP.NET access to the mailroot directory and it was working.... My question is, how is this possible? Why does APS.NET require access to the mailroot directory to load assemblies? Thanks

    Read the article

  • Random Page Cost and Planning

    - by Dave Jarvis
    A query (see below) that extracts climate data from weather stations within a given radius of a city using the dates for which those weather stations actually have data. The query uses the table's only index, rather effectively: CREATE UNIQUE INDEX measurement_001_stc_idx ON climate.measurement_001 USING btree (station_id, taken, category_id); Reducing the server's configuration value for random_page_cost from 2.0 to 1.1 had a massive performance improvement for the given range (nearly an order of magnitude) because it suggested to PostgreSQL that it should use the index. While the results now return in 5 seconds (down from ~85 seconds), problematic lines remain. Bumping the query's end date by a single year causes a full table scan: sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1997-12-31'::date AND How do I persuade PostgreSQL to use the indexes regardless of years between the two dates? (A full table scan against 43 million rows is probably not the best plan.) Find the EXPLAIN ANALYSE results below the query. Thank you! Query SELECT extract(YEAR FROM m.taken) AS year, avg(m.amount) AS amount FROM climate.city c, climate.station s, climate.station_category sc, climate.measurement m WHERE c.id = 5182 AND earth_distance( ll_to_earth(c.latitude_decimal,c.longitude_decimal), ll_to_earth(s.latitude_decimal,s.longitude_decimal)) / 1000 <= 30 AND s.elevation BETWEEN 0 AND 3000 AND s.applicable = TRUE AND sc.station_id = s.id AND sc.category_id = 1 AND sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1996-12-31'::date AND m.station_id = s.id AND m.taken BETWEEN sc.taken_start AND sc.taken_end AND m.category_id = sc.category_id GROUP BY extract(YEAR FROM m.taken) ORDER BY extract(YEAR FROM m.taken) 1900 to 1996: Index "Sort (cost=1348597.71..1348598.21 rows=200 width=12) (actual time=2268.929..2268.935 rows=92 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1348586.56..1348590.06 rows=200 width=12) (actual time=2268.829..2268.886 rows=92 loops=1)" " -> Nested Loop (cost=0.00..1344864.01 rows=744510 width=12) (actual time=0.807..2084.206 rows=134893 loops=1)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (sc.station_id = m.station_id))" " -> Nested Loop (cost=0.00..12755.07 rows=1220 width=18) (actual time=0.502..521.937 rows=23 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.014..0.015 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Nested Loop (cost=0.00..9907.73 rows=3659 width=34) (actual time=0.014..28.937 rows=3458 loops=1)" " -> Seq Scan on station_category sc (cost=0.00..970.20 rows=3659 width=14) (actual time=0.008..10.947 rows=3458 loops=1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1996-12-31'::date) AND (category_id = 1))" " -> Index Scan using station_pkey1 on station s (cost=0.00..2.43 rows=1 width=20) (actual time=0.004..0.004 rows=1 loops=3458)" " Index Cond: (s.id = sc.station_id)" " Filter: (s.applicable AND (s.elevation >= 0) AND (s.elevation <= 3000))" " -> Append (cost=0.00..1072.27 rows=947 width=18) (actual time=6.996..63.199 rows=5865 loops=23)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.000..0.000 rows=0 loops=23)" " Filter: (m.category_id = 1)" " -> Bitmap Heap Scan on measurement_001 m (cost=20.79..1047.27 rows=941 width=18) (actual time=6.995..62.390 rows=5865 loops=23)" " Recheck Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" " -> Bitmap Index Scan on measurement_001_stc_idx (cost=0.00..20.55 rows=941 width=0) (actual time=5.775..5.775 rows=5865 loops=23)" " Index Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" "Total runtime: 2269.264 ms" 1900 to 1997: Full Table Scan "Sort (cost=1370192.26..1370192.76 rows=200 width=12) (actual time=86165.797..86165.809 rows=94 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1370181.12..1370184.62 rows=200 width=12) (actual time=86165.654..86165.736 rows=94 loops=1)" " -> Hash Join (cost=4293.60..1366355.81 rows=765061 width=12) (actual time=534.786..85920.007 rows=139721 loops=1)" " Hash Cond: (m.station_id = sc.station_id)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end))" " -> Append (cost=0.00..867005.80 rows=43670150 width=18) (actual time=0.009..79202.329 rows=43670079 loops=1)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.001..0.001 rows=0 loops=1)" " Filter: (category_id = 1)" " -> Seq Scan on measurement_001 m (cost=0.00..866980.80 rows=43670144 width=18) (actual time=0.008..73312.008 rows=43670079 loops=1)" " Filter: (category_id = 1)" " -> Hash (cost=4277.93..4277.93 rows=1253 width=18) (actual time=534.704..534.704 rows=25 loops=1)" " -> Nested Loop (cost=847.87..4277.93 rows=1253 width=18) (actual time=415.837..534.682 rows=25 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.012..0.014 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Hash Join (cost=847.87..1352.07 rows=3760 width=34) (actual time=6.427..35.107 rows=3552 loops=1)" " Hash Cond: (s.id = sc.station_id)" " -> Seq Scan on station s (cost=0.00..367.25 rows=7948 width=20) (actual time=0.004..23.529 rows=7949 loops=1)" " Filter: (applicable AND (elevation >= 0) AND (elevation <= 3000))" " -> Hash (cost=800.87..800.87 rows=3760 width=14) (actual time=6.416..6.416 rows=3552 loops=1)" " -> Bitmap Heap Scan on station_category sc (cost=430.29..800.87 rows=3760 width=14) (actual time=2.316..5.353 rows=3552 loops=1)" " Recheck Cond: (category_id = 1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1997-12-31'::date))" " -> Bitmap Index Scan on station_category_station_category_idx (cost=0.00..429.35 rows=6376 width=0) (actual time=2.268..2.268 rows=6339 loops=1)" " Index Cond: (category_id = 1)" "Total runtime: 86165.936 ms"

    Read the article

  • Best Practice for Uploading Many (2000+) Images to A Server

    - by bob
    Hello, I have a general question about this. When you have a gallery, sometimes people need to upload 1000's of images at once. Most likely, it would be done through a .zip file. What is the best way to go about uploading this sort of thing to a server. Many times, server have timeouts etc. that need to be accounted for. I am wondering what kinds of things should I be looking out for and what is the best way to handle a large amount of images being uploaded. I'm guessing that you would allow a user to upload a zip file (assuming the timeout does not effect you), and this zip file is uploaded to a specific directory, lets assume in this case a directory is created for each user in the system. You would then unzip the directory on the server and scan the user's folder for any directories containing .jpg or .png or .gif files (etc.) and then import them into a table accordingly. I'm guessing labeled by folder name. What kind of server side troubles could I run into? I'm aware that there may be many issues. Even general ideas would be could so I can then research further. Thanks! Also, I would be programming in Ruby on Rails but I think this question applies accross any language.

    Read the article

  • Problem Linking Boost Filesystem Library in Microsoft Visual C++

    - by Scott
    Hello. I am having trouble getting my project to link to the Boost (version 1.37.0) Filesystem lib file in Microsoft Visual C++ 2008 Express Edition. The Filesystem library is not a header-only library. I have been following the Getting Started on Windows guide posted on the official boost web page. Here are the steps I have taken: I used bjam to build the complete set of lib files using: bjam --build-dir="C:\Program Files\boost\build-boost" --toolset=msvc --build-type=complete I copied the /libs directory (located in C:\Program Files\boost\build-boost\boost\bin.v2) to C:\Program Files\boost\boost_1_37_0\libs. In Visual C++, under Project Properties Additional Library Directories I added these paths: C:\Program Files\boost\boost_1_37_0\libs C:\Program Files\boost\boost_1_37_0\libs\filesystem\build\msvc-9.0express\debug\link-static\threading-multi I added the second one out of desperation. It is the exact directory where libboost_system-vc90-mt-gd-1_37.lib resides. In Configuration Properties C/C++ General Additional Include Directories I added the following path: C:\Program Files\boost\boost_1_37_0 Then, to put the icing on the cake, under Tools Options VC++ Directories Library files, I added the same directories mentioned in step 3. Despite all this, when I build my project I get the following error: fatal error LNK1104: cannot open file 'libboost_system-vc90-mt-gd-1_37.lib' Additionally, here is the code that I am attempting to compile as well as a screen shot of the aformentioned directory where the (assumedly correct) lib file resides: #include "boost/filesystem.hpp" // includes all needed Boost.Filesystem declarations #include <iostream> // for std::cout using boost::filesystem; // for ease of tutorial presentation; // a namespace alias is preferred practice in real code using namespace std; int main() { cout << "Hello, world!" << endl; return 0; } Can anyone help me out? Let me know if you need to know anything else. As always, thanks in advance.

    Read the article

  • C# Win Forms Thread Pool - Unresponsive UI

    - by Goober
    Scenario I have a Windows Form Application. Inside the main form there is a loop that iterates around 3000 times, Creating a new instance of a class on a new thread to perform some calculations. Baring in mind that this setup uses a Thread Pool, the UI does stay responsive when there are only around 100 iterations of this loop (100 Assets to process). But as soon as this number begins to increase heavily, the UI locks up into eggtimer mode and the thus the log that is writing out to the listbox on the form becomes unreadable. Question Am I right in thinking that the best way around this is to use a Background Worker? And is the UI locking up because even though I'm using lots of different threads (for speed), the UI itself is not on its own separate thread? Suggested Implementations greatly appreciated.

    Read the article

  • effective retrieve for a voting system in PHP and MySQL

    - by Adnan
    Hello, I have a system where registered users can vote up/vote down comment for a picture. Something very similar to SO's voting system. I store the votes in a table with values as such; vote_id | vote_comment_id | vote_user_id | vote_date | vote_type Now I have few a question concerned the speed and efficiency for the following; PROB: Once a user opens the picture page with comments I need, if that user has already voted UP/DOWN a comment to show it like; "you voted up" or "you voted down" next to the comment (in SO it the vote image is highlighted) MY POSSIBLE SOL: Right now when I open a picture page for each comment I loop thru, I loop thru my table of votes as well and check if a user has voted and show the status (I compare the vote_user_id with the user's session). How efficient is this? Anyone have a better approach to tackle this kind of problem?

    Read the article

  • datanucleus enhancer & javaw: "the parameter is incorrect"

    - by Riley
    I'm on windows XP using eclipse and the datanucleus enhancer for a gwt + gae app. When I run the enhancer, I get an error: Error Thu Oct 21 16:33:57 CDT 2010 Cannot run program "C:\Program Files\Java\jdk1.6.0_18\bin\javaw.exe" (in directory "C:\ag\dev"): CreateProcess error=87, The parameter is incorrect java.io.IOException: Cannot run program "C:\Program Files\Java\jdk1.6.0_18\bin\javaw.exe" (in directory "C:\ag\dev"): CreateProcess error=87, The parameter is incorrect at java.lang.ProcessBuilder.start(Unknown Source) at com.google.gdt.eclipse.core.ProcessUtilities.launchProcessAndActivateOnError(ProcessUtilities.java:213) at com.google.appengine.eclipse.core.orm.enhancement.EnhancerJob.runInWorkspace(EnhancerJob.java:154) at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) Caused by: java.io.IOException: CreateProcess error=87, The parameter is incorrect at java.lang.ProcessImpl.create(Native Method) at java.lang.ProcessImpl.<init>(Unknown Source) at java.lang.ProcessImpl.start(Unknown Source) ... 5 more I've had this problem before, and it was due to a long classpath. I just spent an hour and a half shortening my classpath by moving libraries around and even moving my eclipse install, but with no luck. Any ideas about where I should start to look for an answer? The error message doesn't include any information about what directory it's in or anything. It's kind of infuriating! Is it possible to make the output of javaw more verbose? Is it possible to get around this class-path size bug?

    Read the article

  • Installing Mercurial on Mac OS X 10.6 Snow Leopard

    - by Matthew Rankin
    Installing Mercurial on Mac OS X 10.6 Snow Leopard I installed Mercurial 1.3.1 on Mac OS X 10.6 Snow Leopard from source using the following: cd ~/src curl -O http://mercurial.selenic.com/release/mercurial-1.3.1.tar.gz tar xzvf mercurial-1.3.1.tar.gz cd mercurial-1.3.1 make ALL sudo make install This installs the site-packages files for Mercurial in /usr/local/lib/python2.6/site-packages/. I know that installing Mercurial from the Mac Disk Image will install the files into /Library/Python/2.6/site-packages/, which is the site-packages directory for the Mac OS X default Python install. I have Python 2.6.2+ installed as a Framework with its site-packages directory in: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages With Mercurial installed this way, I have to issue: PYTHONPATH=/usr/local/lib/python2.6/site-packages:"${PYTHONPATH}" in order to get Mercurial to work. Questions How can I install Mercurial from source with the site-packages in a different directory? Is there an advantage or disadvantage to having the site-packages in the current location? Would it be better in one of the Python site-package directories that already exist? Do I need to be concerned about virtualenv working correctly since I have modified PYTHONPATH (or any other conflicts for that matter)? Reasons for Installing from Source Dan Benjamin of Hivelogic provides the benefits of and instructions for installing Mercurial from source in his article Installing Mercurial on Snow Leopard.

    Read the article

  • Triggering shouldStartLoadWithRequest with multiple window.location.href calls

    - by AlBeebe
    Im trying to pass multiple things from a webpage inside a UIWebView back to my iPhone app via the shouldStartLoadWithRequest method of the UIWebView. Basically my webpage calls window.location.href = "command://foo=bar" and i am able to intercept that in my app no problem. Now if i create a loop and do multiple window.location.href calls at once, then shouldStartLoadWithRequest only appears to get called on once and the call it gets is the very last firing of window.location.href at the end of the loop. The same thing happens with the webview for Android, only the last window.location.href gets processed.

    Read the article

  • Problem building STLport NDK r5/ Android

    - by user558299
    Hi all, I'm trying to build STLport for Android. I got the following steps, but they are not working: 1 - Clone STLport repository using: git clone git://stlport.git.sourceforge.net/gitroot/stlport/stlport 2 - Configure environment using : ./configure --target=arm-eabi --with-extra-cxxflags="-fshort-enums" --with-extra-cflags="-fshort-enums" 3 - From src directory build it using make SYSROOT"{MY NDK path}/platforms/android-5/arch-arm/" release-static But I got the following errors: In file included from ../stlport/stl/_alloc.h:45, from ../stlport/memory:29, from dll_main.cpp:41: ../stlport/stl/_new.h:45:24: error: new: No such file or directory In file included from ../stlport/stl/_limits.h:36, from ../stlport/limits:29, from dll_main.cpp:48: ../stlport/stl/_cwchar.h:26:30: error: cstddef: No such file or directory In file included from ../stlport/stl/_utility.h:35, from ../stlport/utility:35, from dll_main.cpp:40: ../stlport/type_traits:889: error: 'declval' was not declared in this scope ../stlport/type_traits:889: error: expected primary-expression before '>' token ../stlport/type_traits:889: error: expected primary-expression before ')' token ../stlport/type_traits:889: error: 'declval' was not declared in this scope ../stlport/type_traits:889: error: expected primary-expression before '>' token ../stlport/type_traits:889: error: expected primary-expression before ')' token ../stlport/type_traits:889: error: ISO C++ forbids declaration of 'decltype' with no type ../stlport/type_traits:889: error: ISO C++ forbids in-class initialization of non-const static member 'decltype' ../stlport/type_traits:889: error: template declaration of 'int std::tr1::detail::decltype' ../stlport/type_traits:942: error: ISO C++ forbids declaration of 'decltype' with no type ../stlport/type_traits:942: error: ISO C++ forbids in-class initialization of non-const static member 'decltype' ../stlport/type_traits:942: error: template declaration of 'int std::tr1::detail::decltype' make: *** [obj/arm-eabi-gcc/so/dll_main.o] Error 1 Is there any include dir or configuration I´m missing? Thanks, Sergio

    Read the article

  • Does .NET Regex support global matching?

    - by Dave
    I haven't been able to find anything online regarding this. There's RegexOptions, but it doesn't have Global as one of its options. The inline modifiers list also doesn't mention global matching. In a nutshell, I've got a regex to parse something like --arga= "arg1" --argb ="arg2" into separate argument name/value pairs using this regex: --(\\w+)\\s*=\\s*\"(\\w+)\"\\s* but the .NET Regex class doesn't do it globally (iteratively). So in order for me to get this to work, I'd have to do a match, then remove this from the argument string, and loop over and over again until I've exhausted all of the arguments. It would be nicer to run the regex once, and then loop over the match groups to get the name value pairs. Is this possible? What am I missing?

    Read the article

  • Tuple struct constructor complains about private fields

    - by Grubermensch
    I am working on a basic shell interpreter to familiarize myself with Rust. While working on the table for storing suspended jobs in the shell, I have gotten stuck at the following compiler error message: tsh.rs:8:18: 8:31 error: cannot invoke tuple struct constructor with private fields tsh.rs:8 let mut jobs = job::JobsList(vec![]); ^~~~~~~~~~~~~ It's unclear to me what is being seen as private here. As you can see below, both of the structs are tagged with pub in my module file. So, what's the secret sauce? tsh.rs use std::io; mod job; fn main() { // Initialize jobs list let mut jobs = job::JobsList(vec![]); loop { /*** Shell runtime loop ***/ } } job.rs use std::fmt; pub struct Job { jid: int, pid: int, cmd: String } impl fmt::Show for Job { /*** Formatter ***/ } pub struct JobsList(Vec<Job>); impl fmt::Show for JobsList { /*** Formatter ***/ }

    Read the article

  • Unable to create website error (NEW)

    - by salvationishere
    I copied my ClickOnce deployment to my C:/Inetpub/ folder on my webserver and I deleted my Virtual directory. I deleted the WpfApplication1 folder beneath wwwroot in Win Explorer. Then I turned on Web Sharing for this folder. Then I viewed my IIS Manager and this new Share name appeared under wwwroot. So now under Inetpub folder on my web server I have the following directory path: C:\Inetpub\WpfApplication1\ with contents: Application Files publish.htm setup.exe WpfApplication1.application Next, I remapped both the publishing and installation URL's for the project to http://myserver/WpfApplication1/ And I clicked Publish Now. But after I performed a Publish Now operation, I got the following error on my development server (D610-M): Error 1 Failed to connect to 'http://myserver/WpfApplication1/' with the following error: Unable to create the Web site 'http://myserver/WpfApplication1/'. The Web server does not appear to have any authentication methods enabled. It asked for user authentication, but did not send a WWW-Authenticate header. 1 1 WpfApplication1 On my webserver, when I click Browse from the IIS Manager on the WpfApplication1 directory, it shows me the Install page. But after I click the Browse button, it returns an error which says: The remote name could not be resolved: 'd610-m' (D610-M is the name of my development server). How do I fix this?

    Read the article

  • Installing Silverstripe on 000webhost.com (free web host)

    - by benwad
    Hi I'm trying to learn how to work Silverstripe so I extracted the tar file to my free hosting account. I then went on install.php and edited the permissions to meet the requirements set out in install.php but I still get two warnings from the 'webserver configuration' section: I can't tell what webserver you are running. Without Apache I can't tell if mod_rewrite is enabled. I can't tell whether mod_rewrite is running. You may need to configure a rewriting rule yourself. I looked in phpinfo() and mod_rewrite appears to be installed. I contacted the web host and they said it was to do with virtual directory paths, and I should add 'RewriteBase /' to the top of my .htaccess file in the public_html directory. However I did this and still had the same problem. The install.php script says that I can install it even with these warnings but when I press 'install' it just refreshes the install.php page. It doesn't even overwrite the .htaccess file. 000webhost.com says they have successfully installed Silverstripe on their user accounts without much configuration but I can't seem to find out how. EDIT: I managed to get to the next page but now there is another warning which is stopping it installing: Friendly URLs are not working. This is most likely because mod_rewrite isn't configuredcorrectly on your site. Please check the following things in your Apache configuration; you may need to get your web host or server administrator to do this for you: * mod_rewrite is enabled * AllowOverride All is set for your directory I also get this error message from the server: Warning: unlink(mysite/_config.php) [function.unlink]: Permission denied in /home/a2716553/public_html/install.php on line 701

    Read the article

  • Slow SelectSingleNode

    - by Simon
    I have a simple structured XML file like this: <ttest ID="ttest00001", NickName="map00001"/> <ttest ID="ttest00002", NickName="map00002"/> <ttest ID="ttest00003", NickName="map00003"/> <ttest ID="ttest00004", NickName="map00004"/> ..... This xml file can be around 2.5MB. In my source code I will have a loop to get nicknames In each loop, I have something like this: nickNameLoopNum = MyXmlDoc.SelectSingleNode("//ttest[@ID=' + testloopNum + "']").Attributes["NickName"].Value This single line will cost me 30 to 40 millisecond. I searched some old articles (dated back to 2002) saying, use some sort of compiled "xpath" can help the situation, but that was 5 years ago. I wonder is there a mordern practice to make it faster? (I'm using .NET 3.5)

    Read the article

  • asp.net mvc viewdata

    - by mazhar kaunain baig
    <% foreach (var Lang in ((IEnumerable<Egovt.Models.Language>)ViewData["Languages"])) { %> <div id="tabs-<%=Html.Encode(Lang.int_LangId) %>"> <% foreach (var OrganizationMeta in ((IEnumerable<Egovt.Models.OrganizationMeta>)ViewData["OrganizationMeta"])) { %> <% if (OrganizationMeta.vcr_DateType == "text") { %> <%=Server.HtmlDecode(OrganizationMeta.vcr_MetaValue)%><br /> <a href="#"></a> <% } else if (OrganizationMeta.vcr_DateType == "file") { %> <img alt="Image" src="../../Content/Logo/dd.gif" /> <% } %> <% } %> </div> <% } %> I want to base my second loop on the basis of first loop on the langid field, there are many ways but what you guys will use

    Read the article

  • effective retrieve for a voting system in PHP

    - by Adnan
    Hello, I have a system where registered users can vote up/vote down comment for a picture. Something very similar to SO's voting system. I store the votes in a table with values as such; vote_id | vote_comment_id | vote_user_id | vote_date Now I have few a question concerned the speed and efficiency for the following; PROB: Once a user opens the picture page with comments I need, if that user has already voted UP/DOWN a comment to show it like; "you voted up" or "you voted down" next to the comment (in SO it the vote image is highlighted) MY POSSIBLE SOL: Right now when I open a picture page for each comment I loop thru, I loop thru my table of votes as well and check if a user has voted and show the status (I compare the vote_user_id with the user's session). How efficient is this? Anyone have a better approach to tackle this kind of problem?

    Read the article

  • CSV string handling

    - by Christian Hagelid
    Typical way of creating a CSV string (pseudocode): create a CSV container object (like a StringBuilder in C#) Loop through the strings you want to add appending a comma after each one After the loop, remove that last superfluous comma. Code sample: public string ReturnAsCSV(ContactList contactList) { StringBuilder sb = new StringBuilder(); foreach (Contact c in contactList) { sb.Append(c.Name + ","); } sb.Remove(sb.Length - 1, 1); //sb.Replace(",", "", sb.Length - 1, 1) return sb.ToString(); } I feel that there should be an easier / cleaner / more efficient way of removing that last comma. Any ideas? Update I like the idea of adding the comma by checking if the container is empty, but doesn't that mean more processing as it needs to check the length of the string on each occurrence?

    Read the article

  • Imagemagick - File Naming

    - by Josh Crowder
    I am using the convert command to convert a pdf to multiple pngs, I need the naming conventions to be slide-##.png at the moment they come out like slide-1.png but because there is 20+ slides when I loop through them to add them into the model the order comes up wrong, so it looks like slide-1.png slide-10.png slide-11.png and so on, how can I force convert to use double numbers like 01 02 03 and so forth or is there a better way to loop through them, this is the code I have at the moment def convert_keynote_to_slides system('convert -size 640x300 ' + keynote.queued_for_write[:original].path + ' ~/rails/arcticfox/public/system/keynotes/slides/'+File.basename( self.keynote_file_name )+'0%d.png') slide_basename = File.basename( self.keynote_file_name ) files = Dir.entries('/Users/joshcrowder/rails/arcticfox/public/system/keynotes/slides') for file in files #puts file if file.include?(slide_basename +'-') self.slides.build("slide" => "#{file}") if file.include?(slide_basename) end end

    Read the article

  • How to "kill" background worker completely?

    - by Ken Hung
    Hi All, I am writing a windows application that runs a sequence of digital IO actions repeatedly. This sequence of actions starts when the user click a "START" button, and it is done by a background worker in backgroundWorker1_DoWork(). However, there are occasions when I get the "This backgroundworker is currently busy......." error message. I am thinking of implementing the following in the code, by using a while loop to "kill" the background worker before starting another sequence of action: if (backgroundWorker1.IsBusy == true) { backgroundWorker1.CancelAsync(); while (backgroundWorker1.IsBusy == true) { backgroundWorker1.CancelAsync(); } backgroundWorker1.Dispose(); } backgroundWorker1.RunWorkerAsync(); I think my main concern is, will the backgroundWorker1 be "killed" eventually? If it will, will it take a long time to complete it? Will this coding get me into an infinite loop?

    Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >