Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 334/409 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• How do I fix a super slow MacBook?

  - by MakingScienceFictionFact

  I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• My client's solution of a Windows SBS 2011 VM on an Ubuntu host and VirtualBox is pinning the host CPU

  - by Scott Stamp

  Here's my situation, I've got a client hosting two servers (one VM), with the host providing VMware Zimbra, the other Windows Small Business Server 2011. Unfortunately, the person before me had configured this setup as follows. Host: Ubuntu Desktop Edition 10.04 (I know, again, not my choice) running VMware Zimbra 8GB of RAM On-board RAID1 of two 320GB Seagate Barracuda drives for the OS Software RAID5 of four 500GB WD Caviar Black drives on MDADM for bulk storage (sorry, I don't know the model #) A relatively competent quad-core Intel Core i7 CPU from the Nehalem architecture (not suspicious of this as the bottleneck) Guest: Windows Small Business Server 2011 4GB of RAM Host-equivalent CPU allocation VDI file for OS hosted on the on-board RAID, VDI file for storage hosted on the on-board RAID For some reason when running, the VM locks up when sitting nearly idle, and the VirtualBox process reports values of 240%+ in top (how is that even possible?!). Anyone have any ideas or suggestions? I'm totally stumped on this one. Happy to provide whatever logs you'd like to take a look at. Ideally I'd drop VirtualBox and provision this with VMware Workstation, but the client has objected to the (very nominal) costs involved. If hardware needs to be purchased to help, it will be, but we're considering upgrades a last-resort at this time. Thanks in advance! *fingers crossed*

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Excel concatenate strings from cells listed in third cell

  - by Puddingfox

  I have an excel 2007 workbook that has five columns: A. A list of machines B. A list of service numbers for each machine C. A list of service names for each machine ...(nothing here) I. A list of Service Numbers J. A list of Service Names Each machine listed in column A has one or more services running on it from the list in column J. I would like to be able to add services to a machine (i.e. updating the cell in Column C) by simply adding another comma-separated number to Column B. For Example, The first row would look like this assuming Machine1 has the first three services: | A | B | C | Machine1 | 1,2,3 | HTTP,HTTPS,DNS Right now I have to manually update the formula in column c for each change I make. The current formula is: =CONCATENATE(J1,",",J2,",",J3) I would like to use something like this (please forgive my syntax; I'm a coder and I'm treating cell B1 as if it is an indexed array): =CONCATENATE(CELL("J"+B1[0] , "," , "J"+B1[1] , "," "J"+B1[2]) Although having variable numbers of services makes this even more difficult. Is there any way of doing this. For reference, this is columns I and J: | I | J | 1 |HTTP | 2 |HTTPS | 3 |DNS ..... | 16 |Service16 I don't know very much about Excel so any help is greatly appreciated.

  Read the article

• Keeping Xv Overlay configuration throughout an X session.

  - by kriss

  After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

  Read the article

• Python not Working in Vim

  - by jdg

  I have a new install of VIM from the automatic windows installer: gvim73_46.exe I have Python 2.7 (32 bit) installed. If I open gvim, and type: :set python? I get E518: Unknown option. If I try typing: :python 'hello' Vim crashes. What could be wrong? Here are the contents of :version in case they are helpful, although python is installed, and it is using Python 2.7. I also checked, and C:\Windows\System32\python27.dll is where it should be... I am really lost here. Does anyone have any ideas as to what is going wrong? VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) MS-Windows 32-bit GUI version with OLE support Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32 system vimrc file: "$VIM\vimrc" user vimrc file: "$HOME_vimrc" 2nd user vimrc file: "$VIM_vimrc" user exrc file: "$HOME_exrc" 2nd user exrc file: "$VIM_exrc" system gvimrc file: "$VIM\gvimrc" user gvimrc file: "$HOME_gvimrc" 2nd user gvimrc file: "$VIM_gvimrc" system menu file: "$VIMRUNTIME\menu.vim" Compilation: cl -c /W3 /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_XPM_W32 -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 /Fo.\ObjGOLYHTR/ /Ox /GL -DNDEBUG /Zl /MT -DFEAT_OLE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DFEAT_GUI_W32 -DDYNAMIC_ICONV -DDYNAMIC_GETTEXT -DFEAT_TCL -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl83.dll\" -DDYNAMIC_TCL_VER=\"8.3\" -DFEAT_PYTHON -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python27.dll\" -DFEAT_PYTHON3 -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"python31.dll\" -DFEAT_PERL -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl512.dll\" -DFEAT_RUBY -DDYNAMIC_RUBY -DDYNAMIC_RUBY_VER=191 -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby191.dll\" -DFEAT_BIG /Fd.\ObjGOLYHTR/ /Zi Linking: link /RELEASE /nologo /subsystem:windows /LTCG:STATUS oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib gdi32.lib version.lib winspool.lib comctl32.lib advapi32.lib shell32.lib /machine:i386 /nodefaultlib libcmt.lib oleaut32.lib user32.lib /nodefaultlib:python27.lib /nodefaultlib:python31.lib e:\tcl\lib\tclstub83.lib WSock32.lib e:\xpm\lib\libXpm.lib /PDB:gvim.pdb -debug

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• How do I install mod_dav_svn module on an Apache / MAMP server?

  - by fettereddingoskidney

  How do I install additional modules into my server configuration? Currently all of the other modules are installed in /Applications/MAMP/Library/modules...and I see that they are mod_*.so source files, but I cannot seem to get mine to end up here... :? I am trying to set up an SVN repository and use my Apache (MAMP) server to serve the repository. I am using the subversion installation that came (pre-installed?) on Mac OS X 10.5. The repository is working, but I cannot access it remotely through my MAMP server using a client program (Dreamweaver CS5). When I try, I get an error from Dreamweaver, saying: Cannot connect to host xxx: Connection refused. This, I believe, is because I have not properly configured my Apache server to serve the svn repository. So, I added the following lines to my httpd.conf file: <Location /subversion> DAV svn SVNPath /Applications/MAMP/htdocs/svn/ AuthType Basic AuthName "Subversion repository" AuthUserFile /applications/mamp/htdocs/.htpasswd Require ServerAdmin </Location> Restarted the server with the command $ /Applications/MAMP/Library/bin/apachectl -k restart I used this path because otherwise the default apachectl path is set to /usr/sbin/apachectl, which is the location of the pre-installed command on Mac OS X, since the OS comes packaged with a built-in Apache server. And I get the error: Syntax error on line 1153 of /Applications/MAMP/conf/apache/httpd.conf: Unknown DAV provider: svn I checked the upper portion of httpd.conf and see that dav_module (mod_dav.so) is loaded and is in fact in my the modules directory of my server. However, mod_dav_svn is not installed in that directory nor is it in the LoadModule portion of httpd.conf. So I need to install it, right? I have tried installing modules into my MAMP server before but was never successful...because I don't know how to do it. Can someone please walk me through how to install that module? Thanks for your time!

  Read the article

• Error related to pkg-config when installing frei0r as part of another package

  - by Anentropic

  I am trying to build https://github.com/mltframework/shotcut on OS X Lion (using their script in scripts/build_shotcut.sh) and after numerous hurdles I'm stuck on this error: ./configure: line 16062: syntax error near unexpected token `OPENCV,' ./configure: line 16062: `PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)' ERROR: Unable to configure frei0r From what I already googled this means that the PKG_CHECK_MODULES macro hasn't been defined, which probably means there's something wrong with my pkg-config, which I installed via Homebrew. Sounds like the pkg.m4 file isn't found. When I brew install pkg-config I get the following warning: Warning: m4 macros were installed to "share/aclocal". Homebrew does not append "/usr/local/share/aclocal" to "/usr/share/aclocal/dirlist". If an autoconf script you use requires these m4 macros, you'll need to add this path manually. Well I've appended that line to the dirlist file and it doesn't fix the problem above. Can anyone suggest a way forward here? I have briefly tried building my own pkg-config from source but (bizarrely) when I tried to ./configure I got the following error: checking for pkg-config... no ./configure: line 13540: --exists: command not found configure: error: pkg-config and glib-2.0 not found, please set GLIB_CFLAGS and GLIB_LIBS to the correct values if building pkg-config needs pkg-config it seems like a weird catch 22 situation... I think this is probably an unnecessary sidetrack anyway.

  Read the article

• Is it possible to have DisplayLink USB display hotplugging with Xorg 1.13 on kernel 3.4?

  - by lkraav

  keithp seems to be the only one on the interwebs to have written anything about the subject and he worked with 3.5_rc. I don't want to go above 3.4 at the moment for various stability reasons and am trying to see whether I can get this to work. Xorg 1.13 recognizes the display on connection, "udl" module is loaded, xorg-video-modesetting driver also loads, display lights up. So everything seems to be good. I emerged xrandr-9999 (not many changes on top of 1.3.5): $ xrandr --listproviders Providers: number : 2 Provider 0: id: 69 cap: 0x0 crtcs: 2 outputs: 4 associated providers: 0 name:Intel Provider 1: id: 338 cap: 0x0 crtcs: 1 outputs: 1 associated providers: 0 name:modesetting But I can't get any further, just like this guy: $ xrandr --setprovideroutputsource 338 69 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 139 (RANDR) Minor opcode of failed request: 35 () Value in failed request: 0x152 Serial number of failed request: 11 Current serial number in output stream: 12 $ xrandr --setprovideroutputsource 1 0 X Error of failed request: 148 Major opcode of failed request: 139 (RANDR) Minor opcode of failed request: 35 () Serial number of failed request: 11 Current serial number in output stream: 12 Any thoughts?

  Read the article

• What is a good WordPress theme for long Objective-C code samples [closed]

  - by willc2

  As some of you iPhone developers know, Objective-C can be a verbose language. Long, descriptive variable and method names are the norm. I'm not complaining, it makes code easier to read and code completion makes it easy to type. But damn! Check out this method name for getting a cell in a table view: -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath; I have a WordPress blog where I publish my code samples as I'm learning the language. One thing I hate on other blogs is how the code won't fit in a column without that scroll bar or without wrapping around. It really made it hard for me to read and comprehend method names back when I was a super-noob (six months ago). Right now I use the clean-looking Fazyvo 1.0 theme by noonnoo. I love the look of it but the columns are just too narrow and it doesn't have support for wider ones. I could hand-modify it but then I'd have to maintain/redo those changes every time I updated it. Instead, I'm looking for a nice theme that has width control built-in and looks good at larger font sizes. Can anyone help? Note: I use WP-CodeBox for code syntax highlighting.

  Read the article

• Removing/modifying LDAP objectclasses/attributes using olc

  - by Foezjie

  I'm having trouble using openldap's olc to modify a schema without shutting down the server. To test some things out, I made the following schema: objectIdentifier tests orgUlyssisOID:4 objectIdentifier testAttribute tests:1 objectIdentifier testObjectClass tests:2 attributeType ( testAttribute:1 NAME 'attr1' DESC 'attribuut 1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' ) attributeType ( testAttribute:2 NAME 'attr2' DESC 'attribuut 2' SUP userPassword SINGLE-VALUE ) objectclass ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST (attr1 $ attr2 ) ) And added it to a new schema called test. (cn={9}test.ldif in cn=schema). Now I can't seem to figure out how to delete class1 from that schema. I use the following LDIF (and tried lots of variations too, to no avail) dn : cn={9}test,cn=schema,cn=config changetype: modify delete: olcObjectClasses olcObjectClasses: ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST ( attr1 $ attr2 ) ) Running ldapmodify -x -W -D cn=admin,cn=config -f test.ldif -d 0 gives no output. -d 1 gives this: ldap_create ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:389 ldap_new_socket: 4 ldap_prepare_socket: 4 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 4 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 38 bytes to sd 4 ldap_result ld 0x7f2a8ccf3430 msgid 1 wait4msg ld 0x7f2a8ccf3430 msgid 1 (infinite timeout) wait4msg continue ld 0x7f2a8ccf3430 msgid 1 all 1 ** ld 0x7f2a8ccf3430 Connections: * host: localhost port: 389 (default) refcnt: 2 status: Connected last used: Mon Sep 10 11:29:57 2012 ** ld 0x7f2a8ccf3430 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f2a8ccf3430 request count 1 (abandoned 0) ** ld 0x7f2a8ccf3430 Response Queue: Empty ld 0x7f2a8ccf3430 response count 0 ldap_chkResponseList ld 0x7f2a8ccf3430 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f2a8ccf3430 NULL ldap_int_select read1msg: ld 0x7f2a8ccf3430 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 12 contents: read1msg: ld 0x7f2a8ccf3430 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f2a8ccf3430 0 new referrals read1msg: mark request completed, ld 0x7f2a8ccf3430 msgid 1 request done: ld 0x7f2a8ccf3430 msgid 1 res_errno: 0, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 4 ldap_free_connection: actually freed So no real indication of an error. Where am I doing it wrong? Bonus question: If I have some entries of a certain objectclass, can I modify it (add/remove attributeTypes) without removing the entries? Thanks in advance for all help.

  Read the article

• 10 GigE interfaces limits single connection throughput to 1 Gb on a ProCurve 4208vl

  - by wazoox

  The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other machines connected through good ol' 1000 base-T. The interfaces are actually set up as 10 Gig, according to both the switch monitoring interface and the servers (ethtool, etc). However a single connection between two 10 GigE equipped machines through the switch is limited to exactly 1Gb. If I connect two of the 10 GigE machines directly with a CX4 cable, netperf reports the link bandwidth as 9000 Mb/s. NFS achieves about 550 MB/s transfers. But when I'm using the switch, the connection tops at 950 Mb/s through netperf and 110 MB/s with NFS. When I open several connections from 3 of the machines to the 4th, I get 350 MB/s of NFS transfer speed. So each individual 10 GigE ports actually can reach much more than 1 Gb, but individual connections are strictly limited to 1 Gb. Conclusion : the 10 GigE connection through the switch behaves exactly like a trunk of 10 1 Gb connections. That doesn't make any sense to me, unless HP planned these ports only for cascading switches or strictly for many-clients-to-single-server connection. Unfortunately this is NOT the envisioned setup, we need big throughput from machine to machine. Is this a not-so-known (or carefully hidden...) limitation of this type of switch? Should I suggest seppuku to the HP representative? Does anyone have any idea on how to enable a proper behaviour ? I upgraded for an hefty price from bonded 1Gb links to 10 GigE and see exactly ZERO gain! That's absolutely unacceptable.

  Read the article

• Are there any Graphical PowerShell tools?

  - by Dai

  As a developer for the .NET platform, I like to "explore" a platform, framework or API by browsing through the API documentation which explains what everything is - everything is covered and when I use tools like Reflector or Object Browser then I get to know for certain what I'm working with. When I'm writing my own software I can use tools like the Object Test Bench to explore and work with my classes directly. I'm looking for something similar, but for PowerShell - and ones that avoid text-mode. PowerShell is nice, and there are a lot of cool "discoverability"-things it has, such as the "Verb-Noun" syntax, however when I'm working with Exchange Server, for example, I wanted to get a list of AD Permissions on a Receive Connector and I got this list: [PS] C:\Windows\system32>Get-ADPermission "Client SVR6" -User "NT AUTHORITY\Authenticated Users" | fl User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : True AccessRights : {ReadProperty} IsInherited : True Properties : {ms-Exch-Availability-User-Password} ChildObjectTypes : InheritedObjectType : ms-Exch-Availability-Address-Space InheritanceType : Descendents [PS] C:\Windows\system32> Note how the first few entries contain identical text - there's no way to tell them apart easily. But if there was a GUI presumably it would let me drill-down into the differences better. Are there any tools that do this?

  Read the article

• Why is crontab giving "No such file or directory" error when the file DOES exist?

  - by fettereddingoskidney

  I am getting the following three lines in an error message in /var/mail/username after the following job runs in crontab... 15 * * * * /Applications/MAMP/htdocs/iconimageryidx/includes/insertPropertyRESI.php Errors: /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 1: ?php: No such file or directory /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: syntax error near unexpected token `'initialize.php'' /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: `require_once('initialize.php'); The PHP script I am trying to execute DOES in fact exist, and I have made absolutely sure the spelling is correct several times. I ran a crontab on another script before and it worked just fine...any ideas?? The 2nd & 3rd Errors are from line 3 in the following script (the one I am trying to run with the crontab): <?php require_once('initialize.php'); require_once('insertPropertyTypes.php'); $sDate; if(isset($_GET['startDate'])) { $sDate = $_GET['startDate']; } else { $sDate = ''; } $insertResi = new InsertPropertyTypes('Listing', $sDate, 'RESI'); ?> When I run my script insertPropertyRESI.php in the browser, it runs just fine???? Also, initialize.php and insertPropertyTypes.php are in the same directory as insertPropertyRESI.php I am using MAMP with PHP 5.3.5 thakns for the help :?

  Read the article

• What steps to take when CPAN installation fails?

  - by pythonic metaphor

  I have used CPAN to install perl modules on quite a few occasions, but I've been lucky enough to just have it work. Unfortunately, I was trying to install Thread::Pool today and one of the required dependencies, Thread::Converyor::Monitored failed the test: Test Summary Report ------------------- t/Conveyor-Monitored02.t (Wstat: 65280 Tests: 89 Failed: 0) Non-zero exit status: 255 Parse errors: Tests out of sequence. Found (2) but expected (4) Tests out of sequence. Found (4) but expected (5) Tests out of sequence. Found (5) but expected (6) Tests out of sequence. Found (3) but expected (7) Tests out of sequence. Found (6) but expected (8) Displayed the first 5 of 86 TAP syntax errors. Re-run prove with the -p option to see them all. Files=3, Tests=258, 6 wallclock secs ( 0.07 usr 0.03 sys + 4.04 cusr 1.25 csys = 5.39 CPU) Result: FAIL Failed 1/3 test programs. 0/258 subtests failed. make: *** [test_dynamic] Error 255 ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz Running make install make test had returned bad status, won't install without force Failed during this command: ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz: make_test NO What steps do you take to start seeing why an installation failed? I'm not even sure how to begin tracking down what's wrong.

  Read the article

• Windows 7 on a 64-bit computer

  - by GetFree

  I read on Wikipedia that Windows 7 on a 64-bit PC needs twice as much RAM as on a 32-bit PC. I understand why is that: every number stored in memory takes 8 bytes rather than just 4. That, in simple terms, means that your amount of RAM is reduced to half when you use Windows 7 on a 64-bit computer. Now, I have a Intel Core 2 Duo Laptop with Windows Vista right now (2 GB of RAM). My question is: Since Core 2 is a 64-bit architecture, if I upgrade to Windows 7 will my laptop be working as if it had just 1 GB of RAM? Or... to say it in other words: Having a 64-bit PC with Windows 7 do you need twice as much RAM as you need on a 32-bit PC to have the same performance? If I am right, then I'd say it's a terrible business to have a 64-bit computer and Windows 7 on it (I hope I am mistaken, though). Follow-up: After some answers, I'm realizing it's not the same thing to have a 32-bit OS on a 64-bit PC than a 64-bit OS on a 64-bit PC. Apparently, the problem of Windows 7 requiring twice as much RAM on 64-bit architectures is when you have both the OS and PC supporting 64 bits. I'd like new answers to address this issue. Also, is it possible to have more that 4 GB of RAM on a 64-bit PC using a 32-bit version of Windows?

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• Suddenly can't send E-Mails with Apple Mail to Gmail SMTP

  - by slhck

  Hi all, I have a weird problem that started just today. I am using Apple Mail on a Leopard machine, connecting to Gmail. Fetching e-mail works just fine. My SMTP settings are also correct. Still, I can't send mail, it will display a pop up saying that "transferring the content to the mail server" failed (translation from German, could be different in English OS X versions). I have verified the following: My SMTP settings are definitely correct. I have not changed them and the issue appeared today. Also, I went through the Apple online configuration for Gmail accounts and did not have to adjust any setting. I can run network diagnosis and it will connect to both POP and SMTP servers without a problem (all green lights) The Telnet details will show me the HELO message from the Gmail servers, so there's no authentication failure. Console.app will not show any messages related to "mail" when I try to send the mail, so there's no specific error message The mail I'm trying to send does not have an attachment, it is plaintext only I can login to gmail.com and send mails without a problem The recipient address exists and contains no syntax errors I can also not send mails to myself When using another IP and ISP (through VPN), it still doesn't work As for my settings: I connect to smtp.gmail.com and for advanced settings I choose password-based authentication with user: [email protected] and my password. I let Apple Mail try the default ports (for SSL and TLS, respectively). Again: I have not changed a thing between yesterday and today. What is causing that strange behavior? Any help would be much appreciated.

  Read the article

• OpenVZ vs KVM for Linux VMs

  - by Eliasdx

  Hardware: Intel® Core™ i7-920, 12 GB DDR3 RAM, 2 x 1500 GB SATA-II HDD (no SoftRaid because Proxmox developers don't support softraid and they are sure you'll run into problems) Software: Proxmox VE with KVM and OpenVZ support and debian everywhere I want to run multiple Linux VMs on this server. One for a firewall (I want to try pfSense), one for MySQL, one VM for nginx (my stuff) and ~2 VMs with nginx for other people's web sites. I don't think that pfSense will run in an OpenVZ environment but it should run in KVM. The question is if I should setup the other VMs using KVM or OpenVZ. In OpenVZ they should have less overhead for the OS itself but I don't know about the performance. I heard that KVM is more stable but needs more RAM and CPU. I found this diagram showing a OpenVZ setup on the same hardware I'm using. This guy uses an own VM for each and every website which is running on his server. I can't think of any advantage why he's using so many VMs.

  Read the article

• Nginx + PHP-FPM Too Many Resources

  - by user3393046

  My Server has the following Specs CPU: 6 Cores Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz RAM: 32 GB I have a problem with nginx+php-fpm. They are taking too many resources for an unknown reason. Even if i restart the nginx + php-fpm the start up processes will use many resources. My nginx Config is the following: user nginx; worker_processes auto; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; worker_rlimit_nofile 300000; events { worker_connections 6000; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; include /etc/nginx/conf.d/*.conf; } My php-fpm pool config is the following [www] user = nginx group = nginx listen = /var/run/php5-fpm.sock listen.owner = nginx listen.group = nginx listen.allowed_clients = 127.0.0.1 pm = ondemand pm.max_children = 1500; pm.process_idle_timeout = 5; chdir = / security.limit_extensions = .php I'm using on pm.ondemand since my website has to support many concurrent connections at the same time and i was unable to to it with dynamic/static. I guess this isnt the problem because as i said earlier when i restart nginx+php-fpm at the same time, they are taking too much resources without any request. Here is the screenshot with the CPU Usage http://s28.postimg.org/v54q25zod/Untitled.png

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• HD video editing system with Truecrypt

  - by Rob

  I'm looking to do hi-def video editing and transcoding on an unencrypted standard partition, with Truecrypt on the system partition for sensitive data. I'm aiming to keep certain data private but still have performance where needed. Goals: Maximum, unimpacted, performance possible for hi-def video editing, encryption of video not required Encrypt system partition, using Truecrypt, for web/email privacy, etc. in the event of loss In other words I want to selectively encrypt the hard drive - i.e. make the system partition encrypted but not impact the original maximum performance that would be available to me for hi-def/HD video editing. The thinking is to use an unencrypted partition for the video and set up video applications to point at that. Assuming that they would use that partition only for their workspace and not the encrypted system partition, then I should expect to not get any performance hit. Would I be correct? I guess it might depend on the application, if that app is hard-wired to use the system partition always for temporary storage during editing and transcoding, or if it has to be installed on the C: system partition always. So some real data on how various apps behave in the respect would be useful, e.g. Adobe, Cyberlink, Nero etc. etc. I have a Intel i7 Quad-core (8 threads) 1.6Ghz (up to 2.8Ghz turbo-boost) 4Gb, 7200rpm SATA, nvidia HP laptop. I've read the excellent posting about the general performance impact of truecrypt but the benchmarks weren't specific enough for my needs where I'm dealing with HD-video and using a non-encrypted partition to maintain max performance.

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >