Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 335/409 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

  • ssd firmware, linux: updating large batch of drives

    - by wryfi
    I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's bootable ISO does not recognize. None of the affected machines has a Windows license. The story is roughly similar for other SSD mfrs, including Samsung and Intel. To resolve this issue, I was forced to stop each machine, remove the affected SSD, remove the SSD from its hotswap caddy, install it temporarily into my ThinkPad, flash the firmware, reverse, rinse, repeat. It took the better part of a day to get through all the affected devices. I am looking for hardware, software, and/or purchasing strategies to ease this pain, as SSD firmware bugs seem inevitable, and our SSD footprint is growing. My first thought is to get a laptop with eSATA and one of these cables (http://www.newegg.com/Product/Product.aspx?Item=N82E16812311004). That should at least make it so I don't have to remove the drives from their caddies. Surely others have run into this. Any novel solutions?

    Read the article

  • 2010 cgi script failure

    - by Barry F
    Hi. I hope you can help, I'm just a beginner! I have listed a few extra details which may not be relevant. I upload cgi scripts onto local/personal directory on a Apache/2.2.10 server, using FTP95Pro in ASCII. The scripts execute correctly using perl on my web-server in a terminal session. Thus my code has no fatal syntax errors. Webpages 'action' each cgi script at /cgi-bin/. There are symbolic links which link system directory files to my local directory files. FollowSymLinks is enabled (unsure how). Permissions are correct (755). This set-up hasnt changed, apparently. The scripts have excuted perfectly for years, up to 2010. But now, in 2010, I have replaced working scripts with new script/files, now with exactly the same text, filename and permissions. Only the date (last modified) has changed. But now I receive a 500 Internal Server Error, and cannot determine why. My server administator assumes I have code errors. But code is unchanged since last year, and it runs fine (albeit no arguments) on web-server console using perl myscript.cgi Is there anything you can think of which may have changed ? I'm suspicious of the new decade. I think the server swapped from Linux to Windows OS last year, but my server administrator got it all working OK. Is there something unusual he may have missed, related to 2010 ? Thank you in advance

    Read the article

  • Memory modules not running at rated speeds.

    - by Wesley
    Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

    Read the article

  • Windows 7 on a 64-bit computer

    - by GetFree
    I read on Wikipedia that Windows 7 on a 64-bit PC needs twice as much RAM as on a 32-bit PC. I understand why is that: every number stored in memory takes 8 bytes rather than just 4. That, in simple terms, means that your amount of RAM is reduced to half when you use Windows 7 on a 64-bit computer. Now, I have a Intel Core 2 Duo Laptop with Windows Vista right now (2 GB of RAM). My question is: Since Core 2 is a 64-bit architecture, if I upgrade to Windows 7 will my laptop be working as if it had just 1 GB of RAM? Or... to say it in other words: Having a 64-bit PC with Windows 7 do you need twice as much RAM as you need on a 32-bit PC to have the same performance? If I am right, then I'd say it's a terrible business to have a 64-bit computer and Windows 7 on it (I hope I am mistaken, though). Follow-up: After some answers, I'm realizing it's not the same thing to have a 32-bit OS on a 64-bit PC than a 64-bit OS on a 64-bit PC. Apparently, the problem of Windows 7 requiring twice as much RAM on 64-bit architectures is when you have both the OS and PC supporting 64 bits. I'd like new answers to address this issue. Also, is it possible to have more that 4 GB of RAM on a 64-bit PC using a 32-bit version of Windows?

    Read the article

  • Suddenly can't send E-Mails with Apple Mail to Gmail SMTP

    - by slhck
    Hi all, I have a weird problem that started just today. I am using Apple Mail on a Leopard machine, connecting to Gmail. Fetching e-mail works just fine. My SMTP settings are also correct. Still, I can't send mail, it will display a pop up saying that "transferring the content to the mail server" failed (translation from German, could be different in English OS X versions). I have verified the following: My SMTP settings are definitely correct. I have not changed them and the issue appeared today. Also, I went through the Apple online configuration for Gmail accounts and did not have to adjust any setting. I can run network diagnosis and it will connect to both POP and SMTP servers without a problem (all green lights) The Telnet details will show me the HELO message from the Gmail servers, so there's no authentication failure. Console.app will not show any messages related to "mail" when I try to send the mail, so there's no specific error message The mail I'm trying to send does not have an attachment, it is plaintext only I can login to gmail.com and send mails without a problem The recipient address exists and contains no syntax errors I can also not send mails to myself When using another IP and ISP (through VPN), it still doesn't work As for my settings: I connect to smtp.gmail.com and for advanced settings I choose password-based authentication with user: [email protected] and my password. I let Apple Mail try the default ports (for SSL and TLS, respectively). Again: I have not changed a thing between yesterday and today. What is causing that strange behavior? Any help would be much appreciated.

    Read the article

  • OpenVZ vs KVM for Linux VMs

    - by Eliasdx
    Hardware: Intel® Core™ i7-920, 12 GB DDR3 RAM, 2 x 1500 GB SATA-II HDD (no SoftRaid because Proxmox developers don't support softraid and they are sure you'll run into problems) Software: Proxmox VE with KVM and OpenVZ support and debian everywhere I want to run multiple Linux VMs on this server. One for a firewall (I want to try pfSense), one for MySQL, one VM for nginx (my stuff) and ~2 VMs with nginx for other people's web sites. I don't think that pfSense will run in an OpenVZ environment but it should run in KVM. The question is if I should setup the other VMs using KVM or OpenVZ. In OpenVZ they should have less overhead for the OS itself but I don't know about the performance. I heard that KVM is more stable but needs more RAM and CPU. I found this diagram showing a OpenVZ setup on the same hardware I'm using. This guy uses an own VM for each and every website which is running on his server. I can't think of any advantage why he's using so many VMs.

    Read the article

  • Removing/modifying LDAP objectclasses/attributes using olc

    - by Foezjie
    I'm having trouble using openldap's olc to modify a schema without shutting down the server. To test some things out, I made the following schema: objectIdentifier tests orgUlyssisOID:4 objectIdentifier testAttribute tests:1 objectIdentifier testObjectClass tests:2 attributeType ( testAttribute:1 NAME 'attr1' DESC 'attribuut 1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' ) attributeType ( testAttribute:2 NAME 'attr2' DESC 'attribuut 2' SUP userPassword SINGLE-VALUE ) objectclass ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST (attr1 $ attr2 ) ) And added it to a new schema called test. (cn={9}test.ldif in cn=schema). Now I can't seem to figure out how to delete class1 from that schema. I use the following LDIF (and tried lots of variations too, to no avail) dn : cn={9}test,cn=schema,cn=config changetype: modify delete: olcObjectClasses olcObjectClasses: ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST ( attr1 $ attr2 ) ) Running ldapmodify -x -W -D cn=admin,cn=config -f test.ldif -d 0 gives no output. -d 1 gives this: ldap_create ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:389 ldap_new_socket: 4 ldap_prepare_socket: 4 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 4 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 38 bytes to sd 4 ldap_result ld 0x7f2a8ccf3430 msgid 1 wait4msg ld 0x7f2a8ccf3430 msgid 1 (infinite timeout) wait4msg continue ld 0x7f2a8ccf3430 msgid 1 all 1 ** ld 0x7f2a8ccf3430 Connections: * host: localhost port: 389 (default) refcnt: 2 status: Connected last used: Mon Sep 10 11:29:57 2012 ** ld 0x7f2a8ccf3430 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f2a8ccf3430 request count 1 (abandoned 0) ** ld 0x7f2a8ccf3430 Response Queue: Empty ld 0x7f2a8ccf3430 response count 0 ldap_chkResponseList ld 0x7f2a8ccf3430 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f2a8ccf3430 NULL ldap_int_select read1msg: ld 0x7f2a8ccf3430 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 12 contents: read1msg: ld 0x7f2a8ccf3430 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f2a8ccf3430 0 new referrals read1msg: mark request completed, ld 0x7f2a8ccf3430 msgid 1 request done: ld 0x7f2a8ccf3430 msgid 1 res_errno: 0, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 4 ldap_free_connection: actually freed So no real indication of an error. Where am I doing it wrong? Bonus question: If I have some entries of a certain objectclass, can I modify it (add/remove attributeTypes) without removing the entries? Thanks in advance for all help.

    Read the article

  • vim coloring for git

    - by kelloti
    I'm on Windows and my vim loads with a terrible colorscheme with vim. The message is blue on black (so I can't see what I'm typing). I need to change the colorscheme, but :colorscheme slate doesn't do anything. :version vim - vi improved 7.3 (2010 aug 15, compiled oct 27 2010 17:51:38) ms-windows 32-bit console version included patches: 1-46 compiled by bram@kibaale big version without gui. features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +persistent_undo -postscript +printer -profile -python -python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl -tgetent -termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save -xpm_w32 system vimrc file: "$vim\vimrc" user vimrc file: "$home\_vimrc" 2nd user vimrc file: "$vim\_vimrc" user exrc file: "$home\_exrc" 2nd user exrc file: "$vim\_exrc" compilation: cl -c /w3 /nologo -i. -iproto -dhave_pathdef -dwin32 -dfeat_cscope -dwinver=0x0400 -d_win32_winnt=0x0400 /fo.\objc/ /ox /gl -dndebug /zl /mt -ddynamic_iconv -ddynamic_gettext -dfeat_big /fd.\objc/ /zi linking: link /release /nologo /subsystem:console /ltcg:status oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib libcmt.lib user32.lib /pdb:vim.pdb -debug My $HOME\_vimrc looks like colorscheme slate syn on set shiftwidth=2 set tabstop=2 and my $VIM\vimrc is the stock vimrc that comes with the Windows Vim distribution. How do I change my console Vim colorscheme? Especially for Git commits.

    Read the article

  • Good references to know why has my computers stopped responding me

    - by Peterstone
    Hello all! I´m a windows xp user (but not for much time...) and I usually see how my computer stop of responding me. The process is this: Firsly it became totally stopped or very slow for certain periods of 5 minutes. How could I do? After that it gets stopped (Even not totally because If I click on the bar I see a blinking response in the bar botton of the program I click on. It´s could be anything related with security (like the firewall or some virus)? Computer university: I usually experience this, using Matlab (R2007a) with System Generator (its respective compatible version) My personal laptop: It´s usually works well but when stopped periods became to appears I know in not much time it will became totally stopped. I usually see how Word 2007 get stopped and after a while my windows xp gets stopped. (well I can access to the the manage task pressing ctr+alt and...). The only solution I see is to kill program by program... My petition: Please, I need good references that help me how to think in order to avoid or to manage the problems previously described. Does anyone know usefull books or articles? EDIT: Laptop: OS: XP Home Edition Version 2002 SP3 Hardware: HP Mini Intel(R)Atom(TM) CPU N270 @1,60GHz 1.99 GB RAM University Computer: OS: XP Profesional SP3 Hardware: AMD Athlon(tm) XP 1800+ 1.54 GHz, 768 MB RAM

    Read the article

  • How to handle sh: fetch: command not found

    - by Tyler Johnson
    Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps

    Read the article

  • iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

    - by Caitlann Lloyd
    iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

    Read the article

  • Why am I getting this error in the logs?

    - by Matt
    Ok so I just started a new ubuntu server 11.10 and i added the vhost and all seems ok ...I also restarted apache but when i visit the browser i get a blank page the server ip is http://23.21.197.126/ but when i tail the log tail -f /var/log/apache2/error.log [Wed Feb 01 02:19:20 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs [Wed Feb 01 02:19:24 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs but my only file in sites-enabled is this <VirtualHost 23.21.197.126:80> ServerAdmin [email protected] ServerName logicxl.com # ServerAlias DocumentRoot /srv/crm/current/public ErrorLog /srv/crm/logs/error.log <Directory "/srv/crm/current/public"> Order allow,deny Allow from all </Directory> </VirtualHost> is there something i am missing .....the document root should be /srv/crm/current/public and not /etc/apache2/htdocs as the error suggests Any ideas on how to fix this UPDATE sudo apache2ctl -S VirtualHost configuration: 23.21.197.126:80 is a NameVirtualHost default server logicxl.com (/etc/apache2/sites-enabled/crm:1) port 80 namevhost logicxl.com (/etc/apache2/sites-enabled/crm:1) Syntax OK UPDATE <VirtualHost *:80> ServerAdmin [email protected] ServerName logicxl.com DocumentRoot /srv/crm/current/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /srv/crm/current/public/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

    Read the article

  • How to convert Markdown files to Dokuwiki, on a PC

    - by Clare Macrae
    I'm looking for a tool or script to convert Markdown files to Dokuwiki format, that will run on a PC. This is so that I can use MarkdownPad on a PC to create initial drafts of documents, and then convert them to Dokuwiki format, to upload to a Dokuwiki installation that I have no control over. (This means that the Markdown plugin is no use to me.) I could spend time writing a Python script to do the conversion myself, but I'd like to avoid spending time on this, if such a thing exists already. The Markdown tags I'd like to have supported/converted are: Heading levels 1 - 5 Bold, italic, underline, fixed width font Numbered and unnumbered lists Hyperlinks Horizontal rules Does such a tool exist, or is there a good starting point available? Things I've found and considered I initially thought that txt2tags would be helpful, but although it can write both markdown and Dokuwiki, it is very tied to its own specific input format I've also seen Markdown2Dokuwiki, and although I'd certainly be willing to use a sed script, even on a PC, this only supports a tiny, tiny part of Markdown's syntax. python-markdown2 also sounded promising, but it only writes out HTML. pandoc - but it doesn't support Dokuwiki output MultiMarkdown - does not appear to support Dokuwiki output

    Read the article

  • Applications randomly alt-tab? (especially full screen games)

    - by Henry Scotts
    I'm not sure when this began, how it happens, or why it happens, but it is quite bothersome and apparently random. Just randomly throughout the day my computer will just go to the desktop. I could be in a full screen game and it will just immediately alt tab and present the desktop. Or I could be watching a movie and this happens. Sometimes it happens once every three hours and other times (just today actually) it did it twice in the span of 30 seconds. I am positive I am not pressing a hotkey because I launched a game, sat idle, and noticed it alt tab while cleaning up around my room after about 20 minutes. Sometimes it goes days without this happening. Specs: Windows 7 Ultimate 64 Bit, 10 gigs of RAM, GeForce GTX 260, Intel Xeon CPU. I also have basically nothing running when it happens other than the game and FireFox. My FireFox add-ons: Adblock Plus, Download Statusbar, Firebug, FirePHP, lazarus form recovery, tree-style-tabs, yslow. I doubt FireFox is causing the issue but I figured I'd include it anyway because it is the only application I have running when it happens. As for user processes I have running: VCDDaemon (context menu for virtual clone drive), razerhid (mouse), OSD, taskhost, dmw (desktop window manager), anyfullscreengame, audiorepeater, netsession_win, explorer, razerofa, tsvncache, firefox, plugin-container, and EKIJ5000MUI (printer). Whew. Okay. That was a lot of information. If someone could diagnose this I would be most grateful for this has been around with me for years.. Thanks for reading! PS: I doubt it's a virus because I never download illegal software and pretty much only browse Reddit and Stackexchange and play games. If it was a virus it would be a pretty lame one.. Hah..

    Read the article

  • Computer Freezes with "Bugcheck 0" on Windows 7. How do I figure out why?

    - by George Stocker
    After about 10 minutes of running, my computer will hang, exhibiting the following symptoms: Both monitors act as if there is no image being sent to them (on, but blacked out) The CAPS Lock key on the keyboard will not respond. The computer appears to still be running: CPU Fan is whirring. When I reboot, Windows says "The previous shutdown was unexpected." I've enabled the 'don't automatically restart' on an error, and asked the computer to make a memory dump whenever it crashes, but it hasn't done either. The problem is that there's no bugcheck for me to go off of, so there's no way for me to determine what the cause is (I think). Here are my system specs: Intel Core 2 Duo E6750 Gigabyte P35C-DS3R w/ 4.00 GB (DDR2 Ram) Nvidia 8800 GT Windows 7 I've tried running the Windows Memory checker, but the system also freezes when using that after about 10 minutes as well. How can I diagnose the problem with no bugcheck and no ability to run a memory checker? Update Running Memtest86 also causes the computer to crash (looks like it doesn't make it through a full pass - it was only running for about 10 minutes when the PC stopped responding).

    Read the article

  • Varnish, Nginx, Apache, APC, Meteor, Cpanel & Wordpress On A Single Server, Any Good?

    - by Aahan
    Yes, I have read many close questions, but I needed a specific answer and hence this question. First, these are my new server specifications: Linux Server (CentOS), Intel Xeon 3470 Quad Core (2.93GHz x 4) processor, 4 GB DDR3 Memory, 1TB Hard Disk Space, 10 TB Bandwidth and 9 Dedicated IPs. AIM: To speed up my wordpress blog + Increase server's capacity to handle heavy load PLAN: This is how I am planning to setup my server - - VARNISH (in the front, to cache server responses) NGINX (to effectively handle static content & overcome the C10k problem) APACHE (behind Nginx, to effectively deliver dynamic content) APC (PHP page, database & object caching) CPANEL (which requires Apache, and I require it) WORDPRESS W3 TOTAL CACHE (caching plugin for Wordpress). So , will the setup work? Have anyone tried it? Please shower your thoughts and knowledge. NOTE: I can't do without Apache because I am used to that .htaccess & Cpanel stuff. So, it's not any option. All others are options. Please try to help. I hope I am clear in what I wanted to ask.

    Read the article

  • Why is crontab giving "No such file or directory" error when the file DOES exist?

    - by fettereddingoskidney
    I am getting the following three lines in an error message in /var/mail/username after the following job runs in crontab... 15 * * * * /Applications/MAMP/htdocs/iconimageryidx/includes/insertPropertyRESI.php Errors: /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 1: ?php: No such file or directory /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: syntax error near unexpected token `'initialize.php'' /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: `require_once('initialize.php'); The PHP script I am trying to execute DOES in fact exist, and I have made absolutely sure the spelling is correct several times. I ran a crontab on another script before and it worked just fine...any ideas?? The 2nd & 3rd Errors are from line 3 in the following script (the one I am trying to run with the crontab): <?php require_once('initialize.php'); require_once('insertPropertyTypes.php'); $sDate; if(isset($_GET['startDate'])) { $sDate = $_GET['startDate']; } else { $sDate = ''; } $insertResi = new InsertPropertyTypes('Listing', $sDate, 'RESI'); ?> When I run my script insertPropertyRESI.php in the browser, it runs just fine???? Also, initialize.php and insertPropertyTypes.php are in the same directory as insertPropertyRESI.php I am using MAMP with PHP 5.3.5 thakns for the help :?

    Read the article

  • How to find out what is causing a slow down of the application on this server?

    - by Jan P.
    This is not the typical serverfault question, but I'm out of ideas and don't know where else to go. If there are better places to ask this, just point me there in the comments. Thanks. Situation We have this web application that uses Zend Framework, so runs in PHP on an Apache web server. We use MySQL for data storage and memcached for object caching. The application has a very unique usage and load pattern. It is a mobile web application where every full hour a cronjob looks through the database for users that have some information waiting or action to do and sends this information to a (external) notification server, that pushes these notifications to them. After the users get these notifications, the go to the app and use it, mostly for a very short time. An hour later, same thing happens. Problem In the last few weeks usage of the application really started to grow. In the last few days we encountered very high load and doubling of application response times during and after the sending of these notifications (so basically every hour). The server doesn't crash or stop responding to requests, it just gets slower and slower and often takes 20 minutes to recover - until the same thing starts again at the full hour. We have extensive monitoring in place (New Relic, collectd) but I can't figure out what's wrong; I can't find the bottlekneck. That's where you come in: Can you help me figure out what's wrong and maybe how to fix it? Additional information The server is a 16 core Intel Xeon (8 cores with hyperthreading, I think) and 12GB RAM running Ubuntu 10.04 (Linux 3.2.4-20120307 x86_64). Apache is 2.2.x and PHP is Version 5.3.2-1ubuntu4.11. If any configuration information would help analyze the problem, just comment and I will add it. Graphs info phpinfo() apc status memcache status collectd Processes CPU Apache Load MySQL Vmem Disk New Relic Application performance Server overview Processes Network Disks (Sorry the graphs are gifs and not the same time period, but I think the most important info is in there)

    Read the article

  • Wireless does not work on Ubuntu 9.04

    - by Yongwei Xing
    Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

    Read the article

  • How can I determine what is killing my network adapter win7 or vista?

    - by datatoo
    I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

    Read the article

  • How do I keep a bridge enabled on a bonded interface?

    - by jlawer
    I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

    Read the article

  • Docking Station Sound Doesn't Work on Dell D830 with Windows 7

    - by cisellis
    I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

    Read the article

  • apache on Cent OS opening default page on https

    - by Asghar
    I am new to apache and SSL and configuration, i got verysign certificte to secure my site. i have public, private and ca_intermediate cert files. i have configured ssl.conf as below VirtualHost _default_:443> DocumentRoot /var/www/mydomain.com/web/ ServerName mydomain.com:443 ServerAlias www.mydomain.com # Use separate log files for the SSL virtual host; note that LogLevel # is not inherited from httpd.conf. ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel warn # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on problem is that when i access www.mydoamin.com with "HTTP" it works fine, but when i access using "HTTPS" it just opens apache default page. but with green "HTTPS" means my certificates are installed correctly. How can i get rid of this situtaion. Thanks EDIT Output of apachectl -S -bash-3.2# apachectl -S [Mon Aug 27 10:20:19 2012] [warn] NameVirtualHost 82.56.29.189:80 has no VirtualHosts [Mon Aug 27 10:20:19 2012] [warn] NameVirtualHost 82.56.29.189:443 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: _default_:8081 localhost.localdomain (/etc/httpd/conf/sites-enabled/000-apps.vhost:10) *:8080 is a NameVirtualHost default server localhost.localdomain (/etc/httpd/conf/sites-enabled/000-ispconfig.vhost:10) port 8080 namevhost localhost.localdomain (/etc/httpd/conf/sites-enabled/000-ispconfig.vhost:10) *:443 is a NameVirtualHost default server mydomain.com (/etc/httpd/conf.d/ssl.conf:81) port 443 namevhost mydomain.com (/etc/httpd/conf.d/ssl.conf:81) *:80 is a NameVirtualHost default server app.mydomain.com (/etc/httpd/conf/sites-enabled/100-app.mydomain.com.vhost:7) port 80 namevhost app.mydomain.com (/etc/httpd/conf/sites-enabled/100-app.mydomain.com.vhost:7) port 80 namevhost mydomain.com (/etc/httpd/conf/sites-enabled/100-mydomain.com.vhost:7) Syntax OK

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • 100% CPU load on Ubuntu 10.04.3 LTS 64bit

    - by deadtired
    I have 2 days since I am trying to fix this issue, with no success. The server is a mysql database server. Hardware: DELL Poweredge 1950, 2x Intel Xeon Quad Core E5345 @ 2.33GHz, 16 Gb mem, 2x 146Gb SAS (software RAID1) Software: Ubuntu 10.04.3 LTS, MySQL 5.1.41 Issue: while mysql is not used and runs with no database, everything seems alright. As soon as I install a database, it has the reason to bring all 8 cores in 100% with low memory consumption. So, you can imagine the load average goes high (I saw 212 load average for the first time). The server doesn't become unresponsive, but you can see it's slow while browsing the project installed. Additional info: the database used is not more than 24MB and it was moved from a server with less resources and a lot more larger databases. So it's not the database/project. my.cnf is not a reason also, as I used both default one and the one I use on the same distribution on another server.What is interesting is that mysql doesn't close any process and runs to the limit of the max_connections. Logs are quiet. Nothing there. I switched to this Ubuntu version after I suspected some problems in the newly Ubuntu 11.10 server. This one worked alright for an hour after I made a kernel upgrade to 3.0.1 (it was using the memory also) I tested disk speed and seems alright. Some more output on the running server: dstat -cndymlp -N total -D total 3: htop command: Idea? Did anyone meet the same problem? Any fix you can think of?

    Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >