Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 334/714 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Apache 2.2 + mod_fcgid + PHP 5.4: (104) Connection reset by peer

    - by Michele Piccirillo
    On a Debian 6 VPS, I'm running PHP 5.4 via mod_fcgid on a couple of different virtual hosts, managed by Virtualmin GPL. At random, I get 500 Internal Server Errors; restarting Apache brings everything back to normality. Examining the logs, I find messages of this kind: [Thu Oct 04 15:39:35 2012] [warn] [client 173.252.100.117] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Thu Oct 04 15:39:35 2012] [error] [client 173.252.100.117] Premature end of script headers: index.php Any ideas about what is happening? UPDATE: I found a similar question and the author reported to have solved the problem disabling APC. I tried following the advice, but I'm still getting the same errors. VirtualHost configuration SuexecUserGroup "#1000" "#1000" ServerName example.com DocumentRoot /home/example/public_html ScriptAlias /cgi-bin/ /home/example/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/example/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/example/cgi-bin> allow from all </Directory> RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 61 FcgidMaxRequestLen 1073741824 php5.fcgi #!/bin/bash PHPRC=$PWD/../etc/php5 export PHPRC umask 022 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=99999 export PHP_FCGI_MAX_REQUESTS SCRIPT_FILENAME=$PATH_TRANSLATED export SCRIPT_FILENAME exec /usr/bin/php5-cgi Package versions webmin-virtual-server/virtualmin-universal 3.94.gpl-2 apache2/squeeze 2.2.16-6+squeeze8 libapache2-mod-fcgid/squeeze 1:2.3.6-1+squeeze1 php5 5.4.7-1~dotdeb.0 php5-apc 5.4.7-1~dotdeb.0

    Read the article

  • Sending emails with Thunderbird + Postfix + Zarafa does not work

    - by Sven Jung
    I installed zarafa on my vserver and use as MTA postfix. The webaccess works fine, I can revceive and send emails, also receiving mails with thunderbird (IMAP ssl/tls) works. But there is a problem, sending emails with thunderbird. I established an account in thunderbird with imap ssl/tls connection which works finde, and a starttls smtp connection on port 25 for the outgoing mail server. If I try to send an email with thunderbird I get an error: 5.7.1 Relay access denied this is my mail.log Sep 7 16:10:07 postfix/smtpd[6153]: connect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] Sep 7 16:10:08 postfix/smtpd[6153]: NOQUEUE: reject: RCPT from p4FE06C0A.dip.t-dialin.net[79.224.110.10]: 554 5.7.1 <[email protected]>: Relay access denie$ Sep 7 16:10:10 postfix/smtpd[6153]: disconnect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] and this my /etc/postfix/main.conf # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache virtual_mailbox_domains = firstdomain.de, seconddomain.de virtual_mailbox_maps = hash:/etc/postfix/virtual virtual_alias_maps = hash:/etc/postfix/virtual virtual_transport = lmtp:127.0.0.1:2003 myhostname = mail.firstdomain.de alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = ipv4 I don't know what to do, because actually sending mails to internal and external addresses works with the webaccess. Perhaps somebody can help me?

    Read the article

  • CHKDSK is unable to fix NTFS errors

    - by HackToHell
    After my PC shutdown due to power failure, I noticed several errors in EventViewer. The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2. and The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:. So I forced a chkdsk check at startup, and it finds a stream of error, here is the output, it is smaller than the actual log, because, Event Viewer only seems to have this much, the same line was repeated thousands of times.Here is that line. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x198f2 is already in use. Deleting corrupt attribute record (128, "") from file record segment 104690. Attribute record of type 0x80 and instance tag 0x0 is cross linked Also, even after running CHKDSK, the same errors were being reported again so I ran CHKDSK another time and it still loops the same line above, without fixing the error. Can anyone tell me how to fix it?

    Read the article

  • Firefox crash on first load on Ubuntu Linux on Windows Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

    Read the article

  • VirtualBox: Can't get Bridged Networking to work (Win7 host)

    - by MikeTheTall
    I'm trying to set up a virtual LAMP server, including sharing files between the guest OS (Ubuntu Server) and the host OS (Windows 7) using samba. I think my problem is that I can't get Bridged (or Host-Only) networking to work in VirtualBox. I can boot the Linux VM just fine with NAT, but then can't access any services on it directly (except after port-forwarding port 80)(my understanding is that port-forwarding works because I'm not running a web server on the host OS, and therefore it can forward traffic to the unused port 80). I don't think that port-forwarding samba traffic (from the host to the guest) will work since I think that the host OS is using those ports. When I turn off NAT and turn bridged networking on I get an error. The VM fails to boot, with a dialog popping up (title: VirtualBox - Error) that says "Failed to open a session for the virtual machine UbuntuServer. Configuration error: Failed to get MAC address (VERR_CFGM_VALUE_NOT_FOUND). I'm hoping that once this is resolved then samba will work ok :) Any advice on this would be great (how to fix it would be wonderful, next steps for troubleshooting would be great, too :) )

    Read the article

  • Millions of files in php's tmp error - how to delete?

    - by Jonatan Littke
    Hey. I've got a tmp-folder with 14 million php session files in my home directory. At least that's what I think it is, it's not like I could ls it or anything. How can I empty this folder? I've tried using find with the -exec rm {} \; commands but that didn't work. ls 'sess_0*' | xargs rm did neither. I'm currently running rm -rf tmp but after two hours the folder appears to be the same size. REFERENCE INFO: I suddenly encountered an error where SESSIONS could no longer be written to disk: [Mon Apr 19 19:58:32 2010] [warn] mod_fcgid: stderr: PHP Warning: Unknown: open(/var/www/clients/client1/web1/tmp/sess_8e12742b62aa68a3f9476ec80222bbfb, O_RDWR) failed: No space left on device (28) in Unknown on line 0 [Mon Apr 19 19:58:32 2010] [warn] mod_fcgid: stderr: PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/www/clients/client1/web1/tmp) in Unknown on line 0 I ran: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 457G 126G 308G 29% / tmpfs 1.8G 0 1.8G 0% /lib/init/rw udev 10M 664K 9.4M 7% /dev tmpfs 1.8G 0 1.8G 0% /dev/shm But as you can see, the disk isn't full. So I had a look in the syslog which says the following 20 times per second: kernel: [19570794.361241] EXT3-fs warning (device md0): ext3_dx_add_entry: Directory index full! This led me thinking to a full folder, obviously, but since my web folder only has 60k files (having counted them), I guessed it was the tmp folder (the local one, for this instance of php) that messed things up. Some commands I ran: $ sudo ls sess_a* | xargs rm -f bash: /usr/bin/sudo: Argument list too long find . -exec rm {} \; rm: cannot remove directory '.' find: cannot fork: Cannot allocate memory I'm running Debian Lenny, php5, ISPConfig, SuEXEC and Fast-CGI.

    Read the article

  • Setting up Windows network on Xen

    - by samyboy
    I'm trying to install a Windows XP server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny currently hosting around 10 Linux virtual servers. Windows tells me I have a "limited connection". It can't get any DHCP response, nor access other hosts in the network Here is the Xen's client config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '1024' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' Server config (/etc/xen/xend-config.sxp) (network-script network-bridge) (network-script network-dummy) (vif-script vif-bridge) (dom0-min-mem 512) (dom0-cpus 0) (vnc-listen '0.0.0.0') Since I use Debian I had to create a link like this: /etc/xen/qemu-ifup - /etc/xen/scripts/qemu-ifup What did I do wrong? Please tell me if you want some more info (logs, etc)

    Read the article

  • How to disable "safely remove hardware"

    - by Matt
    I have some windows 7 virtual machines in xen that have devices showing up in "safely remove hardware". I don't want users to ever be able to remove/eject any hardware at all. I'm told vmware has a hotplug option. xen doesn't seem to provide this for pci passthrough devices, therefore I'm looking for a reliable solution to prevent users from ejecting devices. This issue is not necessarily related just to virtual machines but seems to be a common problem with devices that get wrongly reported as removable. I'm ideally looking for a way to prevent all devices from appearing or just prevent the safely remove hardware option from ever coming up. I've tried setting device capabilities for specific devices on boot with a script but this for some reason doesn't always seem to work reliably. Is there a way to prevent this icon from appearing in the notification area completely, either by registry key or group policy? I should point out that setting this in group policy to "Administrators" did not seem to work. [Computer ConfigurationWindows SettingsSecurity SettingsLocal PoliciesSecurity Optionsevices:Allowed to format and eject removable media]

    Read the article

  • 403 Forbidden error on Mac OSX - Apache and nginx

    - by tlianza
    Hi All, There are a million questions like this on Google, but I haven't found a solution to my problem. The default Apache install on my Mac is giving 403 Forbidden errors for everything (default directory, user home directory, virtual server, etc). After sifting through the config files, I figured I'd give nginx a try. Nginx serves files fine from it's home directory, but it won't serve files from a subfolder of my user directory. I've configured a simple virtual host, and requesting index.html returns a 403-forbidden. The error message in nginx's log file is pretty clear - it can't read the file: 2011/01/04 16:13:54 [error] 96440#0: *11 open() "/Users/me/Documents/workspace/mobile/index.html" failed (13: Permission denied), client: 127.0.0.1, server: local.test.com, request: "GET /index.html HTTP/1.1", host: "local.test.com" I've opened up this directory to everyone: drwxrwxrwx 6 me admin 204B Dec 31 20:49 mobile And all the files in it: $ ls -lah mobile/ total 24 drwxrwxrwx 6 me admin 204B Dec 31 20:49 . drwxr-xr-x 71 me me 2.4K Dec 31 20:41 .. -rw-r--r--@ 1 me me 6.0K Jan 2 18:58 .DS_Store -rwxrwxrwx 1 me admin 2.1K Jan 4 14:22 index.html drwxrwxrwx 5 me admin 170B Dec 31 20:45 nbproject drwxrwxrwx 5 me admin 170B Jan 2 18:58 script And yet, I cannot figure out why the nginx process cannot read index.html. It's running as the "nobody" user, but the permissions are set such that anyone can read them.

    Read the article

  • Is current SATA 6 gb/s equipment simply unreliable?

    - by korkman
    I have a 45-disk array of Seagate Barracuda 3 TB ST3000DM001 (yes these are desktop drives I'm aware of that) in a Supermicro sc847 JBOD, connected via LSI 9285. I have found a solution for the problem description below by reducing speed via MegaCli -PhySetLinkSpeed -phy0 2 -a0; for i in $(seq 48); do MegaCli -PhySetLinkSpeed -phy${i} 2 -a0; done and rebooting. The question remains: Is this typical for current 6 gb/s equipment? Is this the sad state of SATA storage? Or is some of my equipment (the sff-8088 cables come to mind) bad? The Problem was: Synchronizing HW RAID-6, disks kept offlining. Fetching SMART values reveiled that those which offlined did not increase powered-on hours anymore. That is, their firmware (CC4C) seems to crash. Digging into the matter by switching to Software RAID-6, with the disks passed-through, I got tons of kernel messages scattered across all disks, with 6 gb/s: sd 0:0:9:0: [sdb] Sense Key : No Sense [current] Info fld=0x0 sd 0:0:9:0: [sdb] Add. Sense: No additional sense information And finally, when a disk offlines: megasas: [ 5]waiting for 160 commands to complete ... megasas: [35]waiting for 159 commands to complete ... megasas: [155]waiting for 156 commands to complete ... megaraid_sas: pending commands remain after waiting, will reset adapter. Ugly controller reset here, then minutes later: megaraid_sas: Reset successful. sd 0:0:28:0: Device offlined - not ready after error recovery ... sd 0:0:28:0: [sdu] Unhandled error code sd 0:0:28:0: [sdu] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK sd 0:0:28:0: [sdu] CDB: Read(10): 28 00 23 21 2f 40 00 00 70 00 sd 0:0:28:0: [sdu] killing request Reduced speed to 3 gb/s like written above, all problems vanished.

    Read the article

  • Creating Active Directory on an EC2 box

    - by Chiggins
    So I have Active Directory set up on a Windows Server 2008 Amazon EC2 server. Its set up correctly I think, I never got any errors with it. Just to test that I got it all set up correctly, I have a Windows 7 Professional virtual machine set up on my network to join to AD. I set the VM to use the Active Directory box as its DNS server. I type in my domain to join it, but I get the following error: DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "ad.win.chigs.me": The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.win.chigs.me The following domain controllers were identified by the query: ip-0af92ac4.ad.win.chigs.me However no domain controllers could be contacted. Common causes of this error include: - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. It seems that I can talk to Active Directory, but when I'm trying to contact the Domain Controller, its giving a private IP to connect to, at least thats what I can make out of it. Here are some nslookup results. > win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Non-authoritative answer: Name: ec2-184-73-35-150.compute-1.amazonaws.com Address: 10.249.42.196 Aliases: win.chigs.me > ad.win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Name: ad.win.chigs.me Address: 10.249.42.196 win.chigs.me and ad.win.chigs.me are CNAME's pointing to my EC2 box. Any idea what I need to do so that I can join my virtual machine to the EC2 Active Directory set up I have? Thanks!

    Read the article

  • Coffee spilled and went inside CPU...computer not starting

    - by Harpreet
    Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

    Read the article

  • Four disks - RAID 10 or two mirrored pairs?

    - by ewwhite
    I have this discussion with developers quite often. The context is an application running in Linux that has a medium amount of disk I/O. The servers are HP ProLiant DL3x0 G6 with four disks of equal size @ 15k rpm, backed with a P410 controller and 512MB of battery or flash-based cache. There are two schools of thought here, and I wanted some feedback... 1). I'm of the mind that it makes sense to create an array containing all four disks set up in a RAID 10 (1+0) and partition as necessary. This gives the greatest headroom for growth, has the benefit of leveraging the higher spindle count and better fault-tolerance without degradation. 2). The developers think that it's better to have multiple RAID 1 pairs. One for the OS and one for the application data, citing that the spindle separation would reduce resource contention. However, this limits throughput by halving the number of drives and in this case, the OS doesn't really do much other than regular system logging. Additionally, the fact that we have the battery RAID cache and substantial RAM seems to negate the impact of disk latency... What are your thoughts?

    Read the article

  • Program for remove exact duplicate files while caching search results

    - by John Thomas
    We need a Windows 7 program to remove/check the duplicates but our situation is somewhat different than the standard one for which there are enough programs. We have a fairly large static archive (collection) of photos spread on several disks. Let's call them Disk A..M. We have also some disks (let's call them Disk 1..9) which contain some duplicates which are to be found on disks A..M. We want to add to our collection new disks (N, O, P... aso.) which will contain the photos from disks 1..9 but, of course, we don't want to have any photos two (or more) times. Of course, theoretically, the task can be solved with a regular file duplicate remover but the time needed will be very big. Ideally, AFAIS now, the real solution would be a program which will scan the disks A..M, store the file sizes/hashes of the photos in an indexed database/file(s) and will check the new disks (1..9) against this database. However I have hard time to find such a program (if exists). Other things to note: we consider that the Disks A..M (the collection) doesn't have any duplicates on them the file names might be changed we aren't interested in approximated (fuzzy) comparison which can be found in some photo comparing programs. We hunt for exact duplicate files. we aren't afraid of command line. :-) we need to work on Win7/XP we prefer (of course) to be freeware TIA for any suggestions, John Th.

    Read the article

  • What does "cpuid level" means ? Asking just for curiosity

    - by ogzylz
    For example, I put just 2 core info of a 16 core machine. What does "cpuid level : 6" line means? If u can provide info about lines "bogomips : 5992.10" and "clflush size : 64" I will be appreciated ------------- processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5985.23 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management:

    Read the article

  • Codec Problems with trying to edit videos with VirtualDub

    - by Roy Rico
    So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in virtual dub AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

    Read the article

  • mysqld refusing connections from localhost

    - by Dennis Rardin
    My mail server (Ubuntu 10.04) uses mysql for virtual domains, virtual users. For some reason, mysqld has started refusing connections from localhost. I see these in the mail server log: Oct 6 00:31:14 apollo postfix/trivial-rewrite[16888]: fatal: proxy:mysql:/etc/postfix/mysql-virtual_domains.cf(0,lock|fold_fix): table lookup problem and: Oct 7 13:39:15 apollo postfix/proxymap[25839]: warning: connect to mysql server 127.0.0.1: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I also get the following in auth.log: Oct 6 22:33:31 apollo mysqld[31775]: refused connect from 127.0.0.1 Telnet to the local port: root@apollo:/var/log/mysql# telnet localhost 3306 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. root@apollo:/var/log/mysql# I am not sure why this started happening, but there was a disk failure in a RAID 1 pair a bit earlier that day. So it's possible I have a damaged config file or something. But mail was working for at least an hour after the drive event, so who knows for sure? phpmyadmin works fine, and the databases themselves look like they're intact. I think/believe that selinux and iptables are disabled and not running. So ... why is mysqld refusing connections from localhost? What should I check? What processes might cause this if a .conf file or possibly a binary was damaged? Which other log files might contain clues? I've enabled "general logging" in /etc/mysql/my.cnf, but I get no interesting or informative entries there. Thanks, m00tpoint

    Read the article

  • Prevent master to fall back to master after failure

    - by Chrille
    I'm using keepalived to setup a virtual ip that points to a master server. When a failover happens it should point the virtual ip to the backup, and the IP should stay there until I manually enable (fix) the master. The reason this is important is that I'm running mysql replication on the servers and writes should only be on the master. When I failover I promote the slave to master. The master server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP1 } vrrp_instance APP1 { interface eth0 state EQUAL virtual_router_id 61 priority 999 nopreempt virtual_ipaddress { 217.x.x.129 } smtp_alert } Backup server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP2 } vrrp_instance APP2 { interface eth0 state EQUAL virtual_router_id 61 priority 100 virtual_ipaddress { 217.xx.xx.129 } notify_master "/etc/keepalived/notify.sh del app2" notify_backup "/etc/keepalived/notify.sh add app2" notify_fault "/etc/keepalived/notify.sh add app2” smtp_alert }

    Read the article

  • How to burn a data DVD in Windows XP

    - by SabreWolfy
    I am trying to burn a data DVD (DVD+R) in Windows XP SP3 on a Dell desktop computer. The computer has a licensed copy of Nero 6.3. Nero indicates that an update to version 6.6 is available, but after following the link provided, it redirects me to the Nero website to purchase the upgrade. I'm not interested in doing this. After creating a project in Nero 6.3, inserting a blank DVD+R and trying to start burning the data DVD, Nero indicates that I should insert an appropriate disk into the drive. It does not seem to detect the blank DVD+R. I downloaded infrarecorder and cdrtfe from Sourceforge. Neither of these programs worked either. They both indicated that I should insert the correct media, with cdrtfe saying there is no disk in the drive. I tried with another blank DVD +R with the same effect. I inserted a CDR containing data into the drive and the Windows read read this CDR without a problem. I have no reason to believe that the drive is faulty. I am aware that Windows XP itself is not able to burn DVDs. However, it seems that three third-party software programs are not able to burn a data DVD in Window XP. The specifications provided in Nero indicate that DVD+R is compatible with the drive. How can I burn a backup data DVD in Windows XP?

    Read the article

  • How to restore windows.old for windows 7

    - by Jim Thio
    I reinstall windows. Then I regret that and want to go back. Fortunately the old windows is stored at windows.old I follow the instruction in http://support.microsoft.com/kb/971760 I did it all with small catches When I insert the windows 7 installer, the drive for installer is X and my hard disk is D rather than C. However, on normal windows operation the drive is C. Only when I boot through CD the partition is assigned to the letter D. There is no file bootsect on my windows installer So I can't do **D:\boot\bootsect /nt60 c:** Which should be changed to X:\boot\bootsect /nt60 C: or X:\boot\bootsect /nt60 D: depending on what it really does. As I said if I boot through windows dvd my hard disk letter is D but normally it's C. I am not even sure what that bootsect does anyway. I also can't do this one Attrib –h –s –r boot.ini.saved Copy boot.ini.saved boot.ini There is no file boot.ini or boot.ini.saved It's hidden but I don't see it if I try to look unhidden files either. Because I simply switch from windows 7 to windows 7 and the directory for windows don't change c:\windows I thought it should still work. Well, it doesn't. When windows restart it only goes to the logo and then restart the computer.

    Read the article

  • How can I debug solutions in Visual Studio 2010 from a network share?

    - by alastairs
    I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

    Read the article

  • ubuntu 9.10 installer doesn't recognize the hard drive

    - by dan
    I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

    Read the article

  • Microsoft SQL Server Management Studio causing system freeze

    - by CRoshanLG
    I'm experiencing very slow response from MSSMS and it causes other applications to slow down. Specially Skype crashes after few seconds from opening MSSMS, showing an error called "Disk I/O Error". I'm regularly using few applications (Sublime text, MS Word, Firefox, Outlook, Skype and one or two other apps) simultaneously. The system works fine when MSSMS is not in use! But as soon as MSSMS is opened, all the apps start to freeze (MSSMS also responds very slow). This problem has been there for about a week now (I haven't installed any apps or haven't made any changes to the system during that time). -- System Specifications -- Processor: Core i3 (3.1 GHz) RAM: 4 GB OS: Windows 7 Professional (64 bit) Free space in C drive: ~ 100 GB MS SQL Server 2008 R2 Microsoft SQL Server Management Studio version - 10.50.1600.1 I've tried to find a reason for this but there are no helpful information in the web! There are some solutions suggested (in forums and in Skype Support pages) for the Skypes' "Disk I/O Error", all of which I tried but does not solve the problem. Has anyone faced the same senario? (and hopefully) knows a solution? Systems Log I don't have much knowledge in interpreting the System Log, but I think the Critical and Warnings are not helpful. But there are lots of Error logs which might be useful. In source Kernal-General there are few similar errors saying "An I/O operation initiated by the Registry failed unrecoverably.The Registry could not flush hive (file): <some file>" In source atapi also there are few similar errors -- "The driver detected a controller error on \Device\Ide\IdePort0." (all errors has occurred in 'IdePort0') In Application Error, there are several errors logged, and following is the latest one. Both the Errors which has occurred today is similar (to this one). As it is from Ssms.exe, I guess this is relevant to the cause of problem. But as I said above I can't understand what it means!

    Read the article

  • Centos INODES usage

    - by MSTF
    We are using Centos & cPanel server but we have a important problem for INODES usage. "df -i" command showing for / directory using 6 million inodes!. When I check number of files for / directory, it has few thousand files. df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda4 6578176 6567525 10651 100% / tmpfs 8238094 1 8238093 1% /dev/shm /dev/sdi1 61054976 169 61054807 1% /backup /dev/sda1 51296 38 51258 1% /boot /dev/sda2 0 0 0 - /boot/efi /dev/sdc1 7290880 1252 7289628 1% /database /dev/sdb2 4096000 53258 4042742 2% /home /dev/sdd1 7290880 3500 7287380 1% /home2 /dev/sde1 7290880 68909 7221971 1% /home3 /dev/sdg1 7290880 68812 7222068 1% /home5 /dev/sdh1 7290880 695076 6595804 10% /home6 /dev/sdf1 7290880 58658 7232222 1% /tmp df -h Filesystem Size Used Avail Use% Mounted on /dev/sda4 99G 30G 65G 32% / tmpfs 32G 0 32G 0% /dev/shm /dev/sdi1 917G 270G 601G 32% /backup /dev/sda1 788M 80M 669M 11% /boot /dev/sda2 400M 296K 400M 1% /boot/efi /dev/sdc1 110G 1.5G 103G 2% /database /dev/sdb2 62G 1.1G 58G 2% /home /dev/sdd1 110G 79G 26G 76% /home2 /dev/sde1 110G 3.9G 101G 4% /home3 /dev/sdg1 110G 51G 54G 49% /home5 /dev/sdh1 110G 64G 41G 62% /home6 /dev/sdf1 110G 611M 104G 1% /tmp SDA disk just have Operating System and cPanel. There is no account, database, tmp on SDA disk. Why SDA using high inodes? Note: All disks is SSD 120GB Thanks.

    Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >