Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 335/761 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

• Is there no such thing as a Gigabit switch?

  - by Torben Gundtofte-Bruun

  According to the manufacturer specification, even my rather plain desktop computer has "Gigabit Ethernet". So when I want to copy large files over the LAN (not Internet) it would make sense to have a gigabit switch. I'm searching eBay for a gigabit switch for a planned home network upgrade. The products I find are all labeled "gigabit" but they all have 24 x 10/100Mbit autosensing ports and sometimes 2 x 10/100/1000Mbit autosensing ports. It was my understanding that 10/100 is ancient and that modern computers have network interfaces that work with 1000Mbit, so it would make sense to get a switch that has 24 x 1000Mbit ports. Did I misunderstand, or are sellers (deliberately?) mislabeling older hardware? (Let's not dive into wired vs. wireless networks and how "N" wireless is fast. You'd be right, but not answering the question.)

  Read the article

• Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

  - by Tim

  I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

  Read the article

• How to route traffic through a specific SOCKS proxy on a per-app basis?

  - by GJ.

  I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis? It would also be helpful to know if there's a way to perform such routing globally, based on specific IP addresses (as this could allow for some reasonable workaround).

  Read the article

• How to setup an iTunes library to use between two Macs?

  - by stead1984

  As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

  Read the article

• Liberate Your Laptops! The Return of Virtual Developer Day

  - by Justin Kestelyn

  Many enterprises are reducing travel, conference, and training budgets for their developers without any change in expectation for the results those developers must deliver. How can you keep up? Well, some months back we offered you a Virtual Developer Day on the subject of building Rich Enterprise Applications, the key piece of which was free access to a cloud development environment for hands-on. Now it's back, new and improved! Join us for a FREE, online, multi-language event series for developers (English version is on July 27) at Oracle Technology Network 's Virtual Developer Day. This unique one-day event provides you the opportunity to: 1. Get trained on Oracle Tuxedo from the comfort of your laptop 2. Get hands-on, locally with Oracle VM VirtualBox or via the Cloud 3. Learn what Python, Ruby, and PHP have to do with Oracle Tuxedo 4. Network online with peers, Oracle Tuxedo architects and developers worldwide 5. Sessions, Labs, and Live Help in LOCAL Languages! Review the agenda details, dates, and language support options. Space is limited, so register for this event now! For information and to register go to: www.oracle.com/goto/otnvdd

  Read the article

• Coldfusion server VERY slow page loads

  - by Kevin

  I inherited a windows server 2003 coldfusion 7 server a few weeks ago. Today a network cable was unplugged by accident from the server. On plugging it back in, pages were NOT loading at all. Rather, we were receiving a generic coldfusion error page. After restarting IIS several times and coldfusion even more than that, we finally got pages to start loading. However, the loading is extremely slow (30+ seconds) on pages that used to load instantly. Loading through the local network (IE localhost/cfide/administrator) does nothing to help the load speed. I am not familiar with IIS or Coldfusion (We're in the process of migrating this to Linux/PHP), so this is all new territory to me. I'm hoping someone may have experienced this issue in the past and can help me solve it. I'm happy to provide any additional information that might be necessary....I'm just not sure what information you might need in order to help. Thanks for your time.

  Read the article

• .NET and SMTP Configuration

  - by koevoeter

  Sometimes I feel stupid about discovering .NET features that have been there since an old release (2.0 in this case)... Apparently you can just use this configSecion “mailSettings” and never have to configure your SmtpClient instance in code again (no, not hard-coded): <system.net>     <mailSettings>         <smtp deliveryMethod="Network" from="My Display Name &lt;[email protected]&gt;">             <network host="mail.server.com" />         </smtp>     </mailSettings> </system.net> Now you can go all like: new SmtpClient().Send(mailMessage); …and everything is configured for you, even the from address (which you can obviously override).

  Read the article

• Can't login to SQL Server after moving machine to different office/domain

  - by Dan

  Our company has just been bought and the over the weekend I have brought up the last few machines to plug into their network (they are under a different Windows Domain). The last machine is our Vault system and the SQL Server was using Windows Authentication. I have plugged it into their network and its working fine, but i cannot connect to SQL Server with Management Studio and, I fear, no backup jobs will also be working. When I try to login under Windows Auth, it has the user name of "NEWDOMAIN\Administrator" (greyed out) and then presents a "login failed" message with error code "18456". Can anyone help me with this, or will I just have to reinstall SQL Server, Vault and restore the backup I took before the move?

  Read the article

• Windows 2003 - logging off the Administrator account makes web applications inaccessible

  - by Saravana

  Consider a web application installed on a Windows Server 2003 SP2 machine with the admin account. The application is accessible in the server as well as in the network when at least one session of the admin account is logged in. If there are no active sessions of the admin account, the web application is not accessible via the network, nor accessible locally when logged in with another user account. What would cause the web application to be inaccessible there's no Administrator session? Please suggest anything that might help find the solution.

  Read the article

• Ubuntu 12.04 Precise on Dell Inspirion Duo

  - by Roman M. Kos

  I installed 12.04 version of Ubuntu on my Dell Inspiron Duo. After installing with help of program like UNetBootIn or smth like that. ( Besides i have no problem with kernel panic on chargin on/off like in 11.10. ) After that i followed with steps from here, in the first post here: http://ubuntuforums.org/showthread.php?t=1658635 There left one big problem with touchscreen: When i whant to drag with touchscreen like i`m doing it with mouse (for ex. selecting multile files with mouse) the selectable rectangular doesnot shows while im dragging, when dragging was finished (i put my finger off) it shows the rectangular and hides it. This thing disables all my tries to drag a window or smth else.... Also some time after using touchscreen such things are disabeling: - Often - click from a mouse (after keyboard using functinality restores) - less often - mouse movement disables (sometimes restores sometimes not) - lesser than other - keyboards works but no sygnals accepting (keyoards has indicator, so thay react, mouse of course not) The test from eTouchU utility passes perfeclty. Any idia for solving this problem? P.S.: Im from Ukraine, so sorry if my possible grammar mistakes. P.P.S.: Besides how to know the physicall position of my tabled mode? For automaticall rotating. Like on each rotation do some script.

  Read the article

• Issues connecting to WPA2 with User Authentication Mavericks?

  - by heinst

  I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• Windows 7 - Remote Desktop - multiple credentials

  - by w--

  My home network consists of a couple Windows XP machines and a Windows 7 box. One of the Windows XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, I just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In Windows 7, it seems to store credentials for a box based on machine name. I.e. I can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In Windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box?

  Read the article

• wireshark not seeing all packets on WiFi

  - by Caffeine Coma

  I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

  Read the article

• Connecting to local Sql server 2005 through Internet

  - by Manish

  Hello My Sql server is on Local Machine, I want to access it through Internet. I Configure Surace manager and Configuration manager of sqlserver 2005 for remote access. My sqlserver is running on port:1433 I am using port forwarding , I can access service of other ports, My Connetion String Is: Data Source=190.190.200.100,1433;Network Library=DBMSSOCN;Initial Catalog=myDataBase;User ID=myUsername;Password=myPassword; But it gives following error when i am trying to connect sql server through internet: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• Routing and Remote access rule not being applied internally (Windows SBS)

  - by Tim Saunders

  Hi, I have a Microsoft Small Business Server. I have pointed an external domain name to the external fixed IP address for the server. In routing and remote access I have defined a service for our subversion server as follows: Incoming port: 8443 Private address: 192.168.10.5 Outgoing port: 8443 192.168.10.5 is our development server, not the SBS (which is at 192.168.10.1) This rule works correctly if I am not on our internal network. However if I am on the internal network this rule does not get applied. What can I do/set so this rule is applied both internally and externally (so users with laptops et, don't keep having to change the URL by which they access the subversion server) Not sure what other info you may need, so please let me know if more details are required. T

  Read the article

• What is Finder doing when it has a spinner in the bottom-right?

  - by rspeicher

  Whenever I open a folder on a remote network share that hasn't been opened since I last booted, Finder displays this animated spinner in the bottom-right (see picture below) for about 30 seconds and won't display any of the folder's contents until it's done doing whatever it's doing. This makes browsing the share painfully slow for seemingly no reason. Why's it doing this? I should note that I've disabled .DS_Store files littering network shares using defaults write com.apple.desktopservices DSDontWriteNetworkStores true, so maybe that's why. I'm kind of hoping it's something else, though.

  Read the article

• Possible to get OpenDNS to dereference Host on VPN?

  - by Scott P

  I recently changed ISPs for my home internet. I am now having some trouble getting back into the corporate network from home over the VPN. I have figured out the OpenDNS is resolving the Hosts on the VPN incorrectly when I am using TCP/IP. When I browse to one of the hosts on corporate network, i.e. \host1, from the file manager this succeeds. However, when I ping the host, i.e. ping host1, the IP address is resolving to the OpenDNS name server instead of the actual Host IP address. Does anyone know how to make this work? On a hunch, I turned off type correction. But, this did not help.

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

• Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

  - by Ranjith Kumar

  In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

  Read the article

• Access my mac's local server from a windows machine

  - by Simon Davies

  I am running my test sites on my mac, but I would like be able to use my windows machine to also access this server and be able to write / read fiels form this server. I can access my sites on my windows by using the IP address 192.168.1.???. But I would like to be able to use my windows machine to also access the fiels and edit them. Any ideas much appreciated. Some details: Mac OSX SL file sharing set to on. Windows 7 (tried setting up network map using afp://192.... but nothing) Both machines are connected to a local network, with several other machine (windows) Thanks

  Read the article

• Debian: Firefox or Iceweasel default printer for POS station

  - by Bubnoff

  Context Using Debian 6.04 "Squeeze" as POS station. There are two printers installed: Network printer and a receipt printer It absolutely must be able to print by default to the receipt printer on a certain website though the system default is a network printer. In Debian ...it doesn't. Problem I've set up XP, 7, Ubuntu and even Mac OSX this way, so I'm no stranger to setting Firefox up this way ...same Iceweasel/Firefox settings ...complete fail. Always uses system default no matter what the settings, or, which printer you print from. To get this to work on other systems you do this: Print a page in Firefox using desired printer. Ensure print.save_settings is true. Firefox remembers last printer used Set print.always_print_silent = true The end. This works on every OS I've set up ....except Firefox and Iceweasel in Debian. My only recourse seems to be to set the receipt printer as default or go back to bloaty Ubuntu/Mint ...etc.

  Read the article

• Is it possible to restrict fileserver access to domain users using computers that are members of the domain?

  - by Chris Madden

  It seems domain isolation can be used to accomplish, but I'd like a solution that doesn't require IPsec, or more accurately, doesn't require IPsec on the fileserver. IPsec if done in software has a large CPU overhead and our NAS boxes don't support any kind of offload. The goal is to avoid authenticated users using non-managed machines to access network resources. Network Access Protection (NAP) and the various enforcement points looked promsiing but I couldn't find a bulletproof way to use them [which doesn't require IPsec on the fileserver]. I was thinking when a domain user accesses the NAS box it will first need a Kerberos ticket from AD, so if AD could somehow verify the computer that was requesting the ticket was in the domain I'd have a solution.

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

• FTP Access Denied when uploading to server

  - by Albert

  Ok, here's the story. I have a server running FTP 'out there' I can connect to it using the admin account, browse files, download files. When I try to upload files, I get 550 Access Denied. I have tried through FileZilla and command line. I have windows firewall turned off (on my machine) I can UPLOAD files from another machine (using the same admin account) on our local network (that means, same public IP) what is the problem? I am running Windows 7, Build 7100 and the other machine on the network is running XP SP3 The thing that gets me though, is that this worked for the last probably 4 months, without a problem, I get back in the office after a weekend today and it won't work...

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >