Search Results

Search found 9592 results on 384 pages for 'manager'.

Page 336/384 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• Keeping track of dependency revisions

  - by Samaursa

  I have a project with several dependencies that are in various repositories. Each time I commit changes to my project, I make sure I write the revision numbers of all the dependent repositories so that in the event I ever have to come back to this revision (let's call it 5), I can immediately know which revisions of the dependent repositories revision 5 is guaranteed to work with, update the dependencies to the specified revisions, compile and run the project. So for example if I have: Dep1 @ Revisions 10 Dep2 @ Revisions 20 Dep3 @ Revisions 10 Proj @ Revisions 35 And let's say that when Proj was on revision 17, the Dep1 revision was 5, Dep2 revision was 13 and Dep3 revision was 3. So in my SVN logs, I recorded something like this: !! Works with Dep1 Rev 5, Dep2 Rev 13, Dep3 Rev 3 To me this seems primitive and makes me believe that there is a better way to do it. Now in one of my other questions, Ivy Dependency Manager has been recommended. I have not looked at it in detail yet (seems complicated and yet another thing I must learn). To me it seems like the log of SVN (and Mercurial etc.) could have been split into Log and Dependencies (if any) where the latter could be switched off if there were no dependencies (unless of course I am unaware of an easier/better solution). This would allow for a cleaner log that maybe even warned at each new commit to check the previously defined dependencies again and make sure they have not changed. So, I was wondering how everyone manages this situations and if you have any tips, techniques, programs, suggestions that you can offer. Thank you.

  Read the article

• Application process never terminates on each run

  - by rockyurock

  I am seeing an application always remains live even after closing the application using my Perl script below. Also, for the subsequent runs, it always says that "The process cannot access the file because it is being used by another process. iperf.exe -u -s -p 5001 successful. Output was:" So every time I have to change the file name $file used in script or I have to kill the iperf.exe process in the Task Manager. Could anybody please let me know the way to get rid of it? Here is the code I am using ... my @command_output; eval { my $file = "abc6.txt"; $command = "iperf.exe -u -s -p 5001"; alarm 10; system("$command > $file"); alarm 0; close $file; }; if ($@) { warn "$command timed out.\n"; } else { print "$command successful. Output was:\n", $file; } unlink $file;

  Read the article

• Problem with ScriptManager when trying to email rendered contents of ASP.NET page

  - by pandojc

  I recently added a Telerik control to an ascx that is included in an aspx page. This page has a "Send email" button, which when clicked will email the user the rendered output of the page. The Telerik control I added requires a ScriptManager, so I added that to the ascx. However, now the email button won't work. I get the following error: The control with ID 'myIdHere' requires a ScriptManager on the page. The ScriptManager must appear before any controls that need it. I know the script manager exists because the page works fine when I go that url, it is only failing when it tries to email the rendered output. Here's a code snippet, any ideas as to whether there is a problem with scriptmanager when doing this sort of thing? Page EmailPage = new EmailBasePage(); System.Web.UI.HtmlControls.HtmlForm EmailForm = new System.Web.UI.HtmlControls.HtmlForm(); EmailPage.Controls.Add(EmailForm); EmailForm.Controls.Add(contentTable); //this is the container with all the controls I want to email StringBuilder SB = new StringBuilder(); StringWriter html = new StringWriter(SB); HtmlTextWriter mhtmlWriter = new HtmlTextWriter(html); EmailPage.DesignerInitialize(); EmailPage.RenderControl(mhtmlWriter); mhtmlWriter.Close();

  Read the article

• after assembling jar - No Persistence provider for EntityManager named ....

  - by alabalaa

  im developing a standalone application and it works fine when starting it from my ide(intellij idea), but after creating an uberjar and start the application from it javax.persistence.spi.PersistenceProvider is thrown saying "No Persistence provider for EntityManager named testPU" here is my persistence.xml which is placed under meta-inf directory: <persistence-unit name="testPU" transaction-type="RESOURCE_LOCAL"> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>test.model.Configuration</class> <properties> <property name="hibernate.connection.username" value="root"/> <property name="hibernate.connection.driver_class" value="com.mysql.jdbc.Driver"/> <property name="hibernate.connection.password" value="root"/> <property name="hibernate.connection.url" value="jdbc:mysql://localhost:3306/test"/> <property name="hibernate.show_sql" value="true"/> <property name="hibernate.dialect" value="org.hibernate.dialect.MySQLInnoDBDialect"/> <property name="hibernate.c3p0.timeout" value="300"/> <property name="hibernate.hbm2ddl.auto" value="update"/> </properties> </persistence-unit> and here is how im creating the entity manager factory: emf = Persistence.createEntityManagerFactory("testPU"); im using maven and tried the assembly plug-in with the default configuration fot it, i dont have much experience with assembling jars and i dont know if im missing something, so if u have any ideas ill be glad to hear them

  Read the article

• WinUSB failing on non-development computers

  - by Giawa

  Good afternoon, WinUSB is working well on the development computer that I am using (Win XP SP3). I am able to download new firmware to the Cypress FX2, and then connect to the new USB device once it 'renumerates'. However, if I've tried the same code with the WinUSB driver on a few other computers (Win XP SP3, Win7 x64) and they both returned the error "A device attached to the system is not functioning." when trying to use CreateFile to get a handle to the USB device. The devicePath was found successfully, so I'm not sure why it cannot connect to the device. Furthermore, the device manager states that my device is working properly. I'm curious if I'm missing something when compiling the code? I would guess that my development computer has something installed on it that the other computers do not? Or perhaps it's a power setting and the device is going to sleep (although I've fooled around with the Power Options on each computer to no avail). Does anyone have any ideas? I've compiled under Visual Studio 2008, and have installed the Microsoft C++ 2008 Redistributable Package on the computers that I've tested on. Thanks, Giawa

  Read the article

• Silverlight Image Data Binding

  - by Alexander

  I am new to Silverlight, and have an issue with binding. I have a class ItemsManager, that has inside its scope another class Item. class ItemsManager { ... class Item : INotifyPropertyChanged { ... private BitmapImage bitmapSource; public BitmapImage BitmapSource { get { return bitmapSource; } set { bitmapSource = value; if(PropertyChanged != null )PropertyChanged("BitmapSource") } } } } I do the following in code to test binding: { ItemsManager.Instance.AddItem("123"); //Items manager started downloading item visual //part (in my case bitmap image png) Binding b = new Binding("Source"); b.Source = ItemsManager.Instance.GetItem("123").BitmapSource; b.BindsDirectlyToSource = true; Image img = new Image(); img.SetBinding(Image.SourceProperty, b); img.Width = (double)100.0; img.Height = (double)100.0; LayoutRoot.Children.Add(img); } Once image is loaded, image doesn't appear. Though, if I set directly after image has been loaded its source, it displays well. I also noticed that PropertyChanged("BitmapSource") never fires, because PropertyChanged is null, like Image never binded to it. I am looking forward to hearing from you!

  Read the article

• Should I learn to code?

  - by saltcod

  Hi All, This is more of a philosophical question than a technical one, but I’d like some opinions on it, and I think that there are many others in my position that would benefit. My issue is that I don’t really have time to learn how to code. I know, I know… no one has time anymore, but please hear me out. Since learning to use Drupal about 2 years ago I’ve been involved with several projects wherein I’ve become the default quasi-developer, front-end designer, site manager, and system administrator. What I’ve found is that I can produce fairly nice, feature rich Drupal sites with the wealth of contrib. modules out there (Views, CCK, image handling, etc….). BUT! I can’t code. I know enough PHP to insert something into a block, or re-word a string, but that’s about it. I still don’t really even know how arrays work. My question Succinctly, my question is: Given the time that I have available for all of this stuff – in addition to a full-time job and regular life – am I better off trying to become more expert at the front-end stuff, or should I just learn PHP already? Pros 1. If a project doesn’t use Drupal, I’ll know enough PHP to be able to participate. 2. Learning PHP would help my Drupal development too 3. Learning PHP would make front-end theming easier 4. Learning PHP should give me that missing background in programming – and should allow me to learn other languages in the future Cons 1. At 28, I know I’m not too old to learn anything. But am I too old to become ‘good’? 2. Am I better off getting better and better at front-end UX work? 3. Am I better off farming out the PHP work? Suggestions from coders welcome! Thanks Terry

  Read the article

• Creating Modules for VB Program (Similar to firefox add on)

  - by Assimilater

  Hi all. I have a contact manager program that I'd like to design for multiple network marketing companies. My desired structure would include a core program which covers basic contact management functions. After that one could purchase a module for their specific network marketing company. This module would contain a variety of controls that the original program would need to be able to manipulate. Here is an example of what it would have to have: A group box containing buttons that link to a genealogy view, and the option to import one's donwnline from the back office provided by a company. A panel which is displayed on the contact page allowing the user to input business information or which will be filled by importing a downline from the back office: ie business ID, qualification level, sponsor information etc. a panel displayed when one searches for contacts on the contact list page which allows the user to sort based on information such as when they joined, what their business id is and so forth. a panel which is displayed in a personal business overview page which presents to an individual how many people in their downline are at each qualification level and develop a mailing list for individuals of a certain qualification level. I have the code developed to perform all these functions, I just wanted to give you an example of what needed to be done. I'm thinking that what I'm trying to create is a library that one can download and the program will recognize, but I'm not really sure where to go. What I'm really trying to do is figure out what kind of file I can make that will contain all this code and the GUI information that the program will recognize. Any ideas? With thanks, John

  Read the article

• Sending custom app logs to developer

  - by Templar

  I'm planning to release a new app in the future. I have a custom logging function which logs some application data (not crashes) into a file (location manager state, app foreground-background transitions, main actions...). These logs helped me a lot to debug problems which were app-related, but not causing a crash. Until now these were in the documents directory (shared in iTunes) and the testers sent them to me after they saw some incorrect behaviors, however I don't want to share them anymore because this directory contains the app's database too. I'd like to obtain these logs even when the app will be on App Store, but I don't know how this should be done. As I wrote, it is a new app and even after the test phase may exist minor bugs. I know that the users can report problems in iTunes or on the Dev site, but without a detailed scenario or log it is really hard to correct a bug. Should I make some kind of in-app bug report functionality (even if this creates a wrong user impression) ? How is this usually handled ? Thanks

  Read the article

• How to cancel a deeply nested process

  - by Mystere Man

  I have a class that is a "manager" sort of class. One of it's functions is to signal that the long running process of the class should shut down. It does this by setting a boolean called "IsStopping" in class. public class Foo { bool isStoping void DoWork() { while (!isStopping) { // do work... } } } Now, DoWork() was a gigantic function, and I decided to refactor it out and as part of the process broke some of it into other classes. The problem is, Some of these classes also have long running functions that need to check if isStopping is true. public class Foo { bool isStoping void DoWork() { while (!isStopping) { MoreWork mw = new MoreWork() mw.DoMoreWork() // possibly long running // do work... } } } What are my options here? I have considered passing isStopping by reference, which I don't really like because it requires there to be an outside object. I would prefer to make the additional classes as stand alone and dependancy free as possible. I have also considered making isStopping a property, and then then having it call an event that the inner classes could be subscribed to, but this seems overly complex. Another option was to create a "Process Cancelation Token" class, similar to what .net 4 Tasks use, then that token be passed to those classes. How have you handled this situation? EDIT: Also consider that MoreWork might have a EvenMoreWork object that it instantiates and calls a potentially long running method on... and so on. I guess what i'm looking for is a way to be able to signal an arbitrary number of objects down a call tree to tell them to stop what they're doing and clean up and return.

  Read the article

• Memory mapping of files and system cache behavior in WinXP

  - by Canopus

  Our application is memory intensive and deals with reading a large number of disk files. The total load can be more than 3 GB. There is a custom memory manager that uses memory mapped files to achieve reading of such a huge data. The files are mapped into the process memory space only when needed and with this the process memory is well under control. But what is observed is, with memory mapping, the system cache keeps on increasing until it occupies the available physical memory. This leads to the slowing down of the entire system. My question is how to prevent system cache from hogging the physical memory? I attempted to remove the file buffering (by using FILE_FLAG_NO_BUFFERING ), but with this, the read operations take considerable amount of time and slows down the application performance. How to achieve the scalability without sacrificing much on performance. What are the common techniques used in such cases? I dont have a good understanding of the WinXP OS caching behavior. Any good links explaining the same would also be helpful.

  Read the article

• Android - Turn off display without triggering sleep/lock screen - Turn on with Touchscreen

  - by NebulaSleuth

  I have been trying to find a way to turn off the display, and wake up from the user touching the touch screen. The device is in an embedded environment where the device is a tablet and the user does not have access to anything except the touch screen (no buttons at all). It is connected to power so the battery won't be a problem, but when I detect no activity I want to turn off the screen so it isn't staring them in the face all day and doesn't reduce the life the LCD backlight. I maintain a wakelock permanently and decide when to sleep myself. The problem is that when I turn off the screen using : WindowManager.LayoutParams params = getWindow().getAttributes(); params.screenBrightness = 0; getWindow().setAttributes(params); The activity gets paused and stopped. And the unit does not respond to a touch to wake it up. You need to press the power button. At that point the "slide to unlock" shows up. I want to turn off the display, and then stay running so I can detect a touch screen event and turn the display back on. I also tried turning the display to a brightness of 0.1, which works on some devices, but the device I need it to work on, only "dims" the display. I also tried this: // First Remove my FULL wakelock //then aquire a partial wake lock (which should turn off the display) PowerManager.WakeLock wl = manager.newWakeLock(PowerManager.PARTIAL_WAKE_LOCK, "Your Tag"); wl.acquire(); however this method does not turn off the display.

  Read the article

• How to call shared_ptr<boost::signal> from a vector in a loop?

  - by BTR

  I've got a working callback system that uses boost::signal. I'm extending it into a more flexible and efficient callback manager which uses a vector of shared_ptr's to my signals. I've been able to successfully create and add callbacks to the list, but I'm unclear as to how to actually execute the signals. ... // Signal aliases typedef boost::signal<void (float *, int32_t)> Callback; typedef std::shared_ptr<Callback> CallbackRef; // The callback list std::vector<CallbackRef> mCallbacks; // Adds a callback to the list template<typename T> void addCallback(void (T::* callbackFunction)(float * data, int32_t size), T * callbackObject) { CallbackRef mCallback = CallbackRef(new Callback()); mCallback->connect(boost::function<void (float *, int32_t)>(boost::bind(callbackFunction, callbackObject, _1, _2))); mCallbacks.push_back(mCallback); } // Pass the float array and its size to the callbacks void execute(float * data, int32_t size) { // Iterate through the callback list for (vector<CallbackRef>::iterator i = mCallbacks.begin(); i != mCallbacks.end(); ++i) { // What do I do here? // (* i)(data, size); // <-- Dereferencing doesn't work } } ... All of this code works. I'm just not sure how to run the call from within a shared_ptr from with a vector. Any help would be neat-o. Thanks, in advance.

  Read the article

• Information about PTE's (Page Table Entries) in Windows

  - by Patrick

  In order to find more easily buffer overflows I am changing our custom memory allocator so that it allocates a full 4KB page instead of only the wanted number of bytes. Then I change the page protection and size so that if the caller writes before or after its allocated piece of memory, the application immediately crashes. Problem is that although I have enough memory, the application never starts up completely because it runs out of memory. This has two causes: since every allocation needs 4 KB, we probably reach the 2 GB limit very soon. This problem could be solved if I would make a 64-bit executable (didn't try it yet). even when I only need a few hundreds of megabytes, the allocations fail at a certain moment. The second problem is the biggest one, and I think it's related to the maximum number of PTE's (page table entries, which store information on how Virtual Memory is mapped to physical memory, and whether pages should be read-only or not) you can have in a process. My questions (or a cry-for-tips): Where can I find information about the maximum number of PTE's in a process? Is this different (higher) for 64-bit systems/applications or not? Can the number of PTE's be configured in the application or in Windows? Thanks, Patrick PS. note for those who will try to argument that you shouldn't write your own memory manager: My application is rather specific so I really want full control over memory management (can't give any more details) Last week we had a memory overwrite which we couldn't find using the standard C++ allocator and the debugging functionality of the C/C++ run time (it only said "block corrupt" minutes after the actual corruption") We also tried standard Windows utilities (like GFLAGS, ...) but they slowed down the application by a factor of 100, and couldn't find the exact position of the overwrite either We also tried the "Full Page Heap" functionality of Application Verifier, but then the application doesn't start up either (probably also running out of PTE's)

  Read the article

• Activator.CreateInstance uses a huge amount of memory

  - by Marco

  I have been playing a bit with Silverlight and try to port my Silverlight 3.0 application to Silverlight 4.0. My application loads different XAP files and upon a user request create an instance of a Xaml user control and adds it to the main container, in a sort of MEF approach in order I can have an extensible and pluggable application. The application is pretty huge and to keep acceptable the performances and the initial loading I have built up some helper classes to load in the background all pages and user controls that might be used later on. On Silverlight 3.0 everything was running smoothly without any problem so far. Switching to SL 4.0 I have noticed that when the process approaches to create the instances of the user controls using Activator.CreateInstance, the layout freezes unexpectedly for a minute and sometimes for more. Looking at the task manager the memory usage of IE jumps from 50MB to 400MB and sometimes to 1.5 GB. If the process won't take that much the layout is rendered properly and the memory falls back to 50 MB. Otherwise everything crashes due to out of memory exeption. Does anybody encountered the same problem? Or has anybody a solution about this tricky issue?

  Read the article

• How does Access 2007's moveNext/moveFirst/, etc., feature work?

  - by Chris M

  I'm not an Access expert, but am an SQL expert. I inherited an Access front-end referencing a SQL 2005 database that worked OK for about 5000 records, but is failing miserably for 800k records... Behind the scenes in the SQL profiler & activity manager I see some kind of Access query like: SELECT "MS1"."id" FROM "dbo"."customer" "MS1" ORDER BY "MS1"."id" The MS prefix doesn't appear in any Access code I can see. I'm suspicious of the built-in Access navigation code: DoCmd.GoToRecord , , acNext The GoToRecord has AcRecord constant, which includes things like acFirst, acLast, acNext, acPrevious and acGoTo. What does it mean in a database context to move to the "next" record? This particular table uses an identity column as the PK, so is it internally grabbing all the IDs and then moving to the one that is the next highest??? If so, how would it work if a table was comprised of three different fields for the PK? Or am I on the wrong track, and something else in Access is calling that statement? Unfortunately I see a ton of prepared statements in the profiler. THanks!

  Read the article

• Netbeans, JPA Entity Beans in seperate projects. Unknown entity bean class

  - by Stu

  I am working in Netbeans and have my entity beans and web services in separate projects. I include the entity beans in the web services project however the ApplicaitonConfig.java file keeps getting over written and removing the entries I make for the entity beans in the associated jar file. My question is: is it required to have both the EntityBeans and the WebServices share the same project/jar file? If not what is the appropriate way to include the entity beans which are in the jar file? <?xml version="1.0" encoding="UTF-8"?> <persistence version="2.1" xmlns="http://xmlns.jcp.org/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/persistence http://xmlns.jcp.org/xml/ns/persistence/persistence_2_1.xsd"> <persistence-unit name="jdbc/emrPool" transaction-type="JTA"> <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider> <jta-data-source>jdbc/emrPool</jta-data-source> <exclude-unlisted-classes>false</exclude-unlisted-classes> <properties> <property name="eclipselink.ddl-generation" value="none"/> <property name="eclipselink.cache.shared.default" value="false"/> </properties> </persistence-unit> </persistence> Based on Melc's input i verified that that the transaction type is set to JTA and the jta-data-source is set to the value for the Glassfish JDBC Resource. Unfortunately the problem still persists. I have opened the WAR file and validated that the EntityBean.jar file is the latest version and is located in the WEB-INF/lib directory of the War file. I think it is tied to the fact that the entities are not being "registered" with the entity manager. However i do not know why they are not being registered.

  Read the article

• In Scrum, should a team remove points from (defect) stories that don't result in a code change?

  - by CanIgtAW00tW00t

  My work uses a Scrum-like process to manage projects. I say Scrum-like, because we call it Scrum, but our project managers exclude aspects of Scrum that are inconvenient (most notably customer interaction). One of the stories in our current sprint was to correct a defect. After spending almost an entire day working on the issue, I determined the issue was the result of a permissions issue, so I didn't end up modifying any code. Our Scrum master / project manager decided that no code change equals zero points. I know that Scrum points are supposed to measure size / complexity and not time, but our Scrum master invests a lot of time in preparing graphs and statistical information from past sprints (average velocity, average points completed, etc.) I've always been of the opinion that for statistics to be meaningful in any way, the data must be as accurate as possible. All of our data is fuzzy to begin with, because, from time to time, we're encouraged by the Scrum master to "adjust" our size / complexity estimates, both increasing and decreasing them. I'd like to hear some other developers / Scrum team members thoughts on the merits of statistics based on past sprints, and also whether they think it's appropriate to "adjust" size / complexity estimates in the middle of a sprint, or the remove all points from a story all together for situations similar to what I've just described.

  Read the article

• Processing forms that generate many rows in DB

  - by Zack

  I'm wondering what the best approach to take here is. I've got a form that people use to register for a class and a lot of times the manager of a company will register multiple people for the class at the same time. Presently, they'd have to go through the registration process multiple times and resubmit the form once for every person they want to register. What I want to do is give the user a form that has a single <input/> for one person to register with, along with all the other fields they'll need to fill out (Email, phone number, etc); if they want to add more people, they'll be able to press a button and a new <input/> will be generated. This part I know how to do, but I'm including it to best describe what I'm aiming to do. The part I don't know how to approach is processing that data the form submits, I need some way of making a new row in the Registrant table for every <input/> that's added and include the same contact information (phone, email, etc) as the first row with that row. For the record, I'm using the Django framework for my back-end code. What's the best approach here? Should it just POST the form x times for x people, or is there a less "brute force" way of handling this?

  Read the article

• SQL developer here -- Nesting with select * finicky in Oracle 10g?

  - by John Sullivan

  I am writing a simple diagnostic query I will execute in my Oracle 10g scratchpad. I am trying to do this as part of a step to build the query. In the SQL Scratchpad for Oracle 10g Enterprise Manager Console, this statement runs fine. SELECT * FROM v$session sess, v$sql sql WHERE sql.sql_id(+) = sess.sql_id and sql.sql_text <> ' ' If I try to wrap that up in Select * from () tb2 I get an error, "ORA-00918: Column Ambiguously Defined". I didn't think that could ever happen with this kind of statement so I am a bit confused. select * from (SELECT * FROM v$session sess, v$sql sql WHERE sql.sql_id(+) = sess.sql_id and sql.sql_text <> ' ') tb2 You should always be able to select * from the result set of another select * statement using this structure as far as I'm aware... right? Is Oracle/10g/the scratchpad trying to force me to accept a certain syntactic structure to prevent excessive nesting? Is this a bug in scratchpad or something about how oracle works?

  Read the article

• Does IE completely ignore cache control headers for AJAX requests?

  - by Joshua Hayworth

  Hello there, I've got, what I would consider, a simple test web site. A single page with a single button. Here is a copy of the source I'm working with if you would like to download it and play with it. When that button is clicked, it creates a JavaScript timer that executes once a second. When the timer function is executed, An AJAX call is made to retrieve a text value. That text value is then placed into the DOM. What's my problem? IE Caching. Crack open Task Manager and watch what happens to the iexplorer.exe process (IE 8.0.7600.16385 for me) while the timer in that page is executing. See the memory and handle count getting larger? Why is that happening when, by all accounts, I have caching turned off. I've got the jQuery cache option set to false in $.ajaxSetup. I've got the CacheControl header set to no-cache and no-store. The Expires header is set to DateTime.Now.AddDays(-1). The headers are set in both the page code-behind as well as the HTTP Handler's response. Anybody got any ideas as to how I could prevent IE from caching the results of the AJAX call? Here is what the iexplorer.exe process looks like in ProcessMonitor. I believe that the activity shown in this picture is exactly what I'm attempting to prevent.

  Read the article

• Is it possible to have WAMP run httpd.exe as user [myself] instead of local SYSTEM?

  - by Olivier H

  Hello! I run a django application over apache with mod_wsgi, using WAMP. A certain URL allows me to stream the content of image files, the paths of which are stored in database. The files can be located whether on local machine or under network drive (\my\network\folder). With the development server (manage.py runserver), I have no trouble at all reading and streaming the files. With WAMP, and with network drive files, I get a IOError : obviously because the httpd instance does not have read permission on said drive. In the task manager, I see that httpd.exe is run by SYSTEM. I would like to tell WAMP to run the server as [myself] as I have read and write permissions on the shared folder. (eventually, the production server should be run by a 'www-admin' user having the permissions) Mapping the network shared folder on a drive letter (Z: for instance) does not solve this at all. The User/Group directives in httpd.conf do not seem to have any kind of influence on Apache's behaviour. I've also regedited : I tried to duplicate the HKLM[...]\wampapache registry key under HK_CURRENT_USER\ and rename the original key, but then the new key does not seem to be found when I cmd this > httpd.exe -n wampapache -k start or when I run WAMP. I've run out of ideas :) Has anybody ever had the same issue?

  Read the article

• Windows Phone 7 applications - Orientation Change

  - by Peter Perhác

  Hello there fellow developers! I am working on a Windows Phone 7 app and I can't figure out what I believe is a simple problem for the more seasoned ones. Say I have a layout consisting of two elements: a ListBox (filled with an abundance of items) and a TextBlock (providing the user with some basic instructions). I want these to be one above the other when the device is in Portrait orientation and I want these to be next to each other when the device orientation changes to Landscape. For the Portrait orientation I am using a Grid layout manager, as it lets me define the rows' heights like so... row 0 Height="2*", row 1 Height="*" Listbox sits in row 0, TextBlock in row 1. Now, what would be really neat is to simple change the RowDefinitions into ColumnDefinitions and reassign the listbox/textblock to the grid's columns instead of rows for when the device switches into Landscape. But that's just my idea. I don't know how to get this done elegantly. Maybe there's a better approach to this? Or maybe this is the correct approach and there is some method built for exactly this purpose? Thank you for your suggestions!

  Read the article

• MySQL Datefields: duplicate or calculate?

  - by Konerak

  We are using a table with a structure imposed upon us more than 10 years ago. We are allowed to add columns, but urged not to change existing columns. Certain columns are meant to represent dates, but are put in different format. Amongst others: * CHAR(6): YYMMDD * CHAR(6): DDMMYY * CHAR(8): YYYYMMDD * CHAR(8): DDMMYYYY * DATE * DATETIME Since we now would like to do some more complex queries, using advanced date functions, my manager proposed to d*uplicate those problem columns* to a proper FORMATTED_OLDCOLUMNNAME column using a DATE or DATETIME format. Is this the way to go? Couldn't we just use the STR_TO_DATE function each time we accessed the columns? To avoid every query having to copy-paste the function, I could still work with a view or a stored procedure, but duplicating data to avoid recalculation sounds wrong. Solutions I see (I guess I prefer 2.2.1) 1. Physically duplicate columns 1.1 In the same table 1.1.1 Added by each script that does a modification (INSERT/UPDATE/REPLACE/...) 1.1.2 Maintained by a trigger on each modification 1.2 In a separate table 1.2.1 Added by each script that does a modification (INSERT/UPDATE/REPLACE/...) 1.2.2 Maintained by a trigger on each modification 2. On-demand transformation 2.1 Each query has to perform the transformation 2.1.1 Using copy-paste in the source code 2.1.2 Using a library 2.1.3 Using a STORED PROCEDURE 2.2 A view performs the transformation 2.2.1 A separate table replacing the entire table 2.2.2 A separate table just adding the date-fields for the primary keys Am I right to say it's better to recalculate than to store? And would a view be a good solution?

  Read the article

• Can you override just part of a control template in silverlight

  - by mattmanser

  Is it possible to change or modify a specific part of a control template without having to recreate the entire control template of the control in the xaml? For example, I was trying to get rid of the border of a textbox, so I could throw together a basic search box with rounded corners (example xaml below). Setting the borderthickness to 0 works fine, until you mouse over the textbox and a pseudo border they added to the control flashes up. If I look at the controltemplate for the textbox, I can even see the visual state is named, but cannot think of how to disable it. Without overriding the control template of the TextBox, how would I stop the Visual State Manager firing the mouse over effect on the TextBox? <Border Background="White" CornerRadius="10" VerticalAlignment="Center" HorizontalAlignment="Center" BorderThickness="3" BorderBrush="#88000000"> <Grid VerticalAlignment="Center" HorizontalAlignment="Center" Width="200" Margin="5,0,0,0"> <Grid.ColumnDefinitions> <ColumnDefinition Width="16" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Path Height="13" Width="14" Stretch="Fill" Stroke="#FF000000" StrokeThickness="2" Data="M9.5,5 C9.5,7.4852815 7.4852815,9.5 5,9.5 C2.5147185,9.5 0.5,7.4852815 0.5,5 C0.5,2.5147185 2.5147185,0.5 5,0.5 C7.4852815,0.5 9.5,2.5147185 9.5,5 z M8.5,8.4999971 L13.5,12.499997" /> <TextBox GotFocus="TextBox_GotFocus" Background="Transparent" Grid.Column="1" BorderThickness="0" Text="I am searchtext" Margin="5,0,5,0" HorizontalAlignment="Stretch" /> </Grid> </Border>

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >