Search Results

Search found 19447 results on 778 pages for 'column width'.

Page 337/778 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• find the next due date after today within a group in an Excel PivotTable

  - by Dennis George

  I have got a table set up in one sheet with "transactions". Each row contains a name of a vendor, the amount owed or paid depending on transaction type, and the due date/transaction date. Here is some simplified sample data: Vendor Date Invoice Payment Vendor A 6/30 $200 Vendor A 6/30 ($200) Vendor B 7/5 $500 Vendor B 7/5 ($500) Vendor C 10/28 $50 Vendor A 10/30 $100 Vendor C 11/15 $50 I have already built a PivotTable from that table to group these transactions by vendor and sum the remainder owed. What I'm trying to figure out is how to, for each vendor, get the next due date (min date of the group, excluding dates < Today()), or if there is no next due date then I want to see the max date for that group. Here is what my PivotTable looks like, plus the date column I'd like to add (assuming Today() = 10/23): Vendor Date Owed Vendor B 7/5 - Vendor C 10/28 $100 Vendor A 10/30 $100 I know calling it next due date might not be so accurate if I end up with the date of a payment in that column, but I'm ok with that. tl;dr : I want to find the next earliest date within each group, or the last date. How do I do this?

  Read the article

• Sorting/grouping when there are multiple values in one cell

  - by ngm

  I have an Excel 2007 spreadsheet, where each row of the dataset describes a feature of a piece of software. One of the columns in the spreadsheet is Relevant Users, which describes which users of the software the feature is of interest to. There may be a couple of different users interested in a feature, in which case I've been filling in the cell with the two user types separated by a colon, e.g. 'Usertype A; Usertype D'. Occassionally, I'd like to sort my data by the Relevant Users column. However, the way I'm populating the column means the sorting isn't very smart. If I have a feature where 'Relevant Users' is 'Usertype A; Usertype D', and then I sort by Relevant Users, that feature will be grouped at the end of all the other features of relevant to Usertype A, as it's just sorting alphabetically. But I want it to be listed in the two separate groups of Usertype A and Usertype D. Or, if I have a pivot table that groups the features together under the heading of Relevant User, I'll get all the features for 'Usertype A', then 'Usertype B', then 'Usertype C', then 'Usertype D', then 'Usertype A; Usertype D', etc. Whereas I really want a feature with Relevant Users as 'Usertype A; Usertype D' to show up in both the Usertype A group and the Usertype D group. I guess if this information was in a database I might have a many-to-many table linking Relevant Users to features. But is there a way to go about having this kind of many-to-many relationship in Excel?

  Read the article

• Set scheduled task last result to 0x0 manually

  - by Rogier

  Every night a task runs that checks if any scheduled task has a Last Result is not equal to 0x0. If a scheduled tasks has an error like 0x1, then automatically an e-mail is sent to me. As some tasks are running only weekly, and sometimes an error occurs which results in not equal to 0x0, every night an e-mail is sent with the error message, as the Last Result column still shows the last result of 0x1. But I would like to set the Last Result column to 0x0 manually if I solved a problem, so I won't get every night an e-mail with the error message. So is it possible to set the scheduled tasks Last Result to 0x0 manually (or by a script)? @harrymc. See located script underneath that is sending the e-mail. I can easily add a criteria to ignore result 0x1 (or another code), however this is not the solution as most of the times this result is a real error and has to be e-mailed. set [email protected] set SMTPServer=SMTPserver set PathToScript=c:\scripts set [email protected] for /F "delims=" %%a in ('schtasks /query /v /fo:list ^| findstr /i "Taskname Result"') do call :Sub %%a goto :eof :Sub set Line=%* set BOL=%Line:~0,4% set MOL=%Line:~38% if /i %BOL%==Task ( set name=%MOL% goto :eof ) set result=%MOL% echo Task Name=%name%, Task Result=%result% if not %result%==0 ( echo Task %name% failed with result %result% > %PathToScript%\taskcheckerlog.txt bmail %PathToScript%\taskcheckerlog.txt -t %YourEmailAddress% -a "Warning! Failed %name% Scheduled Task on %computername%" -s %SMTPServer% -f %FromAddress% -b "Task %name% failed with result %result% on CorVu scheduler %computername%" )

  Read the article

• How flexible is the 'indirect' function?

  - by Chuck

  My curiosity pushes me to ask this question. If I were to have a series of functions that referenced a different column in a worksheet but all ended on the same row of data is there a way to point the 'row' part of a cell reference to a blank cell and use it has a variable to show the results of the functions up to a desired row simultaneously? Example: =Average('worksheet 1'.$A$1:'worksheet 1'.$A100) =Max('worksheet 1'.$B$1:'worksheet 1'.$B100) =Min('worksheet 1'.$C$1:'worksheet 1'.$C100) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D100) Pseudo formulas... =Average('worksheet 1'.$A$1:'worksheet 1'.$A*('worksheet 2'.$A$1)*) =Max('worksheet 1'.$B$1:'worksheet 1'.$B*('worksheet 2'.$A$1)*) =Min('worksheet 1'.$C$1:'worksheet 1'.$C*('worksheet 2'.$A$1)*) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D*('worksheet 2'.$A$1)*) Where 'worksheet 2'.$A$1 would only contain a number corresponding to a row in 'worksheet 1'. After stumbling upon and playing with the indirect() function I have only been able to replace the entire cell reference (Column and Row) with any success. The formula so far =SUM('worksheet 1'.C3:INDIRECT(A1)) Where A1 is on 'worksheet 2' and contains a full cell reference pointing to 'worksheet 1'. Any pointers?

  Read the article

• linux hardware raid 10 / lvm / virtual machine partition alignment and filesystem optimization

  - by Jason Ward

  I've been reading everything I can find about partition alignment and filesystem optimization (ext4 and xfs) but still don't know enough to be confident in setting up my current configuration. My remaining confusion comes from the LVM layer and if I should use raid parameters on the filesystem in guest os'es. My main questions are: When I use 'pvcreate --dataalignment' do I use the stripe-width as calculated for a filesystem on RAID (128kB for ext4 in my situation), the Stripe size of the RAID set (256kB), something else altogether, or do I not need this? When I create ext2/3/4 or xfs filesystems in guests on the Logical Volumes, should I add the settings for the underlying RAID (e.g. mkfs.ext4 -b 4096 -E stride=64,stripe-width=128)? Does anyone see any glaring errors in my set up below? I'm running some benchmarks now but haven't done enough to start comparing results. I have four drives in RAID 10 on a 3ware 9750-4i controller (more details on the settings below) giving me a 6.0TB device at /dev/sda. Here is my partition table: Model: LSI 9750-4i DISK (scsi) Disk /dev/sda: 5722024MiB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1.00MiB 257MiB 256MiB ext4 BOOTPART boot 2 257MiB 4353MiB 4096MiB linux-swap(v1) 3 4353MiB 266497MiB 262144MiB ext4 4 266497MiB 4460801MiB 4194304MiB Partition 1 is to be the /boot partition for my xen host. Partition 2 is swap. Partition 3 is to be the root (/) for my xen host. Partition 4 is to be (the only) physical volume to be used by LVM (for those who are counting, I left about 1.2TB unallocated for now) For my Xen guests, I usually create a Logical Volume of the needed size and present it to the guests for them to partition as needed. I know there are other ways of handling that but this method works best for my situation. Here's the hardware of interest on my CentOS 6.3 Xen Host: 4x Seagate Barracuda 3TB ST3000DM001 Drives (sector size: 512 logical/4096 physical) 3ware 9750-4i w/BBU (sector size reported: 512 logical/512 physical) All four drives make up a RAID 10 array. Stripe: 256kB Write Cache enabled Read Cache: intelligent StoreSave: Balance Thanks!

  Read the article

• RAM being displayed is lesser than the actual in my Windows 7

  - by Prateek Somani

  I am using Windows 7 and Ubuntu on the same machine. Earlier I had 3 GB of RAM,but now the Windows is displaying just 1 GB of RAM. Please also find the output of the free command in my Ubuntu : total used free shared buffers cached Mem: 1008208 904808 103400 5736 13516 239596 -/+ buffers/cache: 651696 356512 Swap: 3127292 10252 3117040 Has the swap memory consumed my 2 GB of RAM? Will I be able to use the whole of 3GB of the RAM in my Windows? Regards, Prateek Update : I tried to run the lshw command and I got the following output : *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 1GiB *-bank:0 description: SODIMM DDR3 Synchronous 1067 MHz (0.9 ns) product: HMT112S6BFR6C-H9 vendor: Hynix physical id: 0 serial: 2C71D069 slot: Bottom - Slot 1 size: 1GiB width: 64 bits clock: 1067MHz (0.9ns) *-bank:1 description: SODIMM DDR3 Synchronous 1067 MHz (0.9 ns) [empty] product: 16JSF25664HZ-1G4F1 vendor: Micron physical id: 1 serial: FD421821 slot: Bottom - Slot 2 width: 64 bits clock: 1067MHz (0.9ns) Why it is able to detect the vendor/product name of the bank-1 RAM, why can't it detect the RAM size and other details ? Has my RAM got faulty?

  Read the article

• emule algorithm and how to get fast download speed.

  - by Benjamin

  Actually, I use amule in ubuntu. Because emule users are much more, I wrote emule in this title. But whatever emule or amule, it's okay. Both of them are very similar. I want to get fast-download speed as much as I can. But I don't understand emule(or amule)'s detail functions and algorithms. These are always very qurious to me. If I provide higher upload-speed or more valuable files to other people, can I get benefit?(My download speed) Is serverlist important? Does it cause my download-speed? I captured a image for my amule. Please explain these columns and let me know your tips for getting fast speed. What does 8/9+23 mean in the Source column? What does 294/300(1) mean in the Source column? What does QR:608(0) mean in the Priority? What do I do for getting fast download speed as much as I can get? You can also explain other columns.

  Read the article

• How to open semicolon delimited CSV-files in US-version of Excel

  - by Holgerwa

  When I double-click on a .csv file, it is opened in Excel. The csv-files have columns delimited with semicolons (not commas, but also a valid format). Using a German Windows/Excel setup, the opened file is displayed correctly, the columns are separated where the semicolons existed in the csv-file. But when I do the same on an (US-) English Windows/Excel setup, only one column is imported, showing the whole data including the semicolons in the first column. (I don't have an English setup available for tests, users have reported the behavior) I tried to change the list separator value in Windows regional settings, but that didn't change anything. What can I do to be able to double-click-open those CSV-files on an English setup? EDIT: It seems to be the best solution not to rely on CSV-files in this case. I was hoping that there is some formatting for CSV-files that makes it possible to use them internationally. The best solution seems that I'll switch to creating XLS-files. Thanks to all for your suggestions and helpful tips!

  Read the article

• Logging into Local Statusnet instance on Apache causes browser to download a file

  - by DilbertDave

  I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

  Read the article

• How to disable mod_security2 rule (false positive) for one domain on centos 5

  - by nicholas.alipaz

  Hi I have mod_security enabled on a centos5 server and one of the rules is keeping a user from posting some text on a form. The text is legitimate but it has the words 'create' and an html <table> tag later in it so it is causing a false positive. The error I am receiving is below: [Sun Apr 25 20:36:53 2010] [error] [client 76.171.171.xxx] ModSecurity: Access denied with code 500 (phase 2). Pattern match "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" at ARGS:body. [file "/usr/local/apache/conf/modsec2.user.conf"] [line "352"] [id "300015"] [rev "1"] [msg "Generic SQL injection protection"] [severity "CRITICAL"] [hostname "www.mysite.com"] [uri "/node/181/edit"] [unique_id "@TaVDEWnlusAABQv9@oAAAAD"] and here is /usr/local/apache/conf/modsec2.user.conf (line 352) #Generic SQL sigs SecRule ARGS "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" "id:1,rev:1,severity:2,msg:'Generic SQL injection protection'" The questions I have are: What should I do to "whitelist" or allow this rule to get through? What file do I create and where? How should I alter this rule? Can I set it to only be allowed for the one domain, since it is the only one having the issue on this dedicated server or is there a better way to exclude table tags perhaps? Thanks guys

  Read the article

• Storing changes to multiple databases in a single centralized database

  - by B4x

  The setup: multiple MySQL databases at different locations with the same scheme. The databases are in production. The motivation: we want to present information in these databases in a web interface, clearly showing which database the row originated from. We want to be able to get this data from one single source (for different reasons, one of them is pagination which gets tricky if you use multiple sources). The problem: how do we collect data from multiple databases, storing it at a central location and clearly marking the origin of each row? We have discussed using a centralized DB that tracks changes to the production DBs, with the same schema and one additional column for origin. If possible, we would like to avoid having to make changes in the production environment. Since we can't use MySQL's replication (multiple masters to a single slave isn't allowed), what are our other options? Are there any existing solutions for something like this or do we have to code something ourselves? Is the best solution to change the database schemas in production and add a column for origin? The idea of a centralized database isn't set in stone. If there is a solution to this that solves our other problems without a centralized DB, we can be flexible. Any help is much appreciated.

  Read the article

• Copy one db diagram from one db to another on different servers? (Same db)

  - by sah302

  I used the copy database wizard to copy my database from our test server to our production server, the database copied everything fine except for the diagram. Okay no problem, first I make sure the target database on production has the support objects created to use database diagraming. Then I select to import data from the other database and chose the dbo.sysdiagrams.Go through with the rest of the import data wizard, but then I get the following error: Validating (Error) Messages Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "diagram_id". (SQL Server Import and Export Wizard) Error 0xc0202045: Data Flow Task: Column metadata validation failed. (SQL Server Import and Export Wizard) Error 0xc004706b: Data Flow Task: "component "Destination - sysdiagrams" (31)" failed validation and returned validation status "VS_ISBROKEN". (SQL Server Import and Export Wizard) Error 0xc004700c: Data Flow Task: One or more component failed validation. (SQL Server Import and Export Wizard) Error 0xc0024107: Data Flow Task: There were errors during task validation. (SQL Server Import and Export Wizard) So apparently it didn't like that. What's the problem? I am pretty beginner in SQL Server and only do stuff via the GUI usually so am not sure what to do at this point. The databases are the same, but on different servers. Thanks!

  Read the article

• Lookup Multiple Results for Multiple Criteria

  - by Matt

  I've got a list of parent SKUs for items I need to create in my inventory system. This list has been finely paired down to the 165 products we would like to carry. However, each one of these 165 SKUs has between 2 and 8 child SKUs of different colors, sizes, etc. Those are stored on a different worksheet, mixed into around 2500 items. Those are the SKUs I need to input into my inventory system. Here is what it looks like. Sheet 1 is just SKUs: A 1 2 3 4 Sheet 2 is comprised of all the child SKUs, with parent SKUs in column B. Not all parents have the same number of children: A B 1BLKM 1 1BLKL 1 1BLUM 1 2BLKM 2 2BLKL 2 2BLUM 2 2ORAM 2 3BLKM 3 3BLUM 3 I want to look up all of the child SKUs for the Parent SKU list that has been fine tuned. Parent SKU is included as a column on the child SKU worksheet. I need to lookup all matches of the Parent SKU, then continue to move down the parent SKU list until all matches for all 165 parent items have been found. It seems like every function I try can't use an Array for input. Is there a way to do this with Lookup or some combination of index, match, row, etc? Any way at all to do it without VBA? Or maybe even a VBA solution with code that I can understand, as someone who hasn't used VBA before.

  Read the article

• How to calculate unweighted averages in Excel PivotTable?

  - by yonatron

  I often make PivotTables in which each row contains a number of per-person average measures. I then want to look at the unweighted column average for each measure, and usually make some kind of chart from these. Because my individual cells are often averaged from different numbers of data points, the Grand Total row ends up being a weighted average, which I’m not interested in. So I usually make my own average row a few rows above the table to use for my charts. That’s not too much work, but there’s another problem. I often add a few more people’s worth of data to the PivotTables’ source, then refresh the tables. This means my average row needs to be updated to encompass more rows from the PivotTable. Not a huge deal with one table, but when I have lots of them across lots of sheets, I have to do find/replace on a whole bunch of formulas. So: is there a way to automatically get unweighted column averages in a PivotTable, such that when the table is refreshed, the averages don’t change locations and encompass the newly added (or removed) data Thanks

  Read the article

• Find and Replace String in filenames

  - by shekhar

  I have thousands of files with no specific extensions. What I need to do is to search for a sting in filename and replace with other string and further search for second string and replace with any other string and so on. I.e.: I have multiple strings to replace with other multiple strings. It may be like: "abc" in filename replaced with "def" * String "abc" may be in many files "jkl" in filename replaced with "srt" * String "jkl" may be in many files "pqr" in filename replaced with "xyz" * String "pqr" may be in many files I am currently using excel macro to get the file names in excel and then preserving original names in one column and replacing desired in the content copied in other column. then I create a batch file for the same. Like: rename Path\OriginalName1 NewName1 rename Path\OriginalName2 NewName2 Problem with the above procedure is that it takes a lot of time as the files are many. And As I am using excel 2003 there is limitation on number of rows as well. I need a script in batch like: replacestr abc with def replacestr pqr with xyz in a single directory. Will it be better to do in unix script?

  Read the article

• EXCEL workbook, intermitently, takes 30 seconds to load

  - by Julio Nobre

  I am trying to figure out why a simple .XLS EXCEL workbook is taking, randomly, 30 seconds to open. Before answering: Please, bear mind the following: Problem symptoms Hanging is intermitent and it takes exactly 30 seconds; During hanging there is no cpu or disk activity; It only happens during workbook load. Every runs smooth after that; Windows Explorer.exe hangs on folder, but all other folders, system and applications are still responsive; There are no consecutive hangings. I have to wait for while to reproduce this behaviour; All workbooks where located on a local drive (C:\BPI); The workbook has no macros and no addins; Office 2003 is being used for several years; The computer is running Windows XP; Computer has several network mapped drives, all addressed to main file server; Recently, main fileserver was replaced by Windows 2011 SBS Standard Edition What I have done so far I have traced machine Explorer.exe, using Process Monitor, added Duration column, and filtered by Duration 1. That's is how I found that hanging was taking exactly 30 seconds. For further information, please refer to Oliver Salzburg tutorial. Using Process Monitor, I have also figured out than five operations were taking most of sample collecting duration. Looking at sample image below, column Operation below you will notice that one single operation was taking 29 seconds; I have tried different workbooks (all of them smaller than 30 KB); I have, temporarily, removed all shortcuts on User Document's folder that were pointing to network drives or shares; I have runned CCleaner to fix registry issues; I made sure that there were no external links on tested workbooks; I have reproduced this behaviour for hours; I have extensivelly researched for hours on the web; Process Monitor's collected and filtered data

  Read the article

• Printing from Firefox on different printers and setting the page details beforehand

  - by user1162541

  I´ve got an odd problem and I have not been able to fix this. I have a computer which is connected to two printers. One is a receipt printer (EPSON TM-U220), and the other one is an impact printer (Epson LX-300+). From Firefox, I need to print on both printers at different moments. So first I print on the receipt printer, then on the impact printer, etc. However, whenever I first print on the receipt printer, and then go back to the impact printer, the printout is only the width of the page of the receipt printer. That is, the page does not come out properly, just the left part of the page is used for printing and the right part is completely empty, as if I am just printing on the small receipt paper. And there is no way I can tell Firefox that I am printing on this larger printer. The second print on the impact printer goes fine. Firefox now knows it is printing on the impact printer, and it comes out properly on the full page width. But every first print on the impact printer is using the wrong paper size. How can I fix this? When I go to PAGE PREVIEW I can not set the printer UNTIL I actually print the page. If I go to PRINT PREVIEW CONFIGURE PAGE, I can not set the printer I will be using. I can only do so if I go to PRINT PREVIEW PRINT (here is the dropdown box to set the printer). But I can only set the printer and then click PRINT, or CANCEL. If I click PRINT, then the computer remembers the setting but that page will come our wrong, and when I click cancel it simply does not remember the printer I just set.

  Read the article

• Gathering buslogic SCSI hardware and virtual machine operating system

  - by Julian

  I'm trying to use Powershell to get SCSI hardware from several virtual servers and get the operating system of each specific server. I've managed to get the specific SCSI hardware that I want to find with my code, however I'm unable to figure out how to properly get the operating system of each of the servers. Also, I'm trying to send all the data that I find into a csv log file, however I'm unsure of how you can make a powershell script create multiple columns. Here is my code (almost works but something's wrong): $log = "C:\Users\me\Documents\Scripts\ScsiLog.csv" Get-VM | Foreach-Object { $vm = $_ Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } | Foreach-Object { get-VMGuest -VM $vm } | Foreach-Object{ Write-output $vm.Guest.VmName >> $log } } I don't receive any errors when I run this code however whenever I run it I'm only getting the name of the servers and not the OS. Also I'm not sure what I need to do to make the OS appear in a different column from the name of the server in the csv log that I'm creating. What do I need to change in my code to get the OS version of each virtual machine and output it in a different column in my csv log file? EDIT: Here's a more in depth look at things I've tried that have all failed: Get-VM | Foreach-Object { $vm = $_ $svm = Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } Foreach-Object {get-VMGuest -VM $svm } | Foreach-Object{Write-output $svm >> $log} } #Get-VM | Foreach-Object { # $vm = $_ # Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic"} #| write-host $vm # | Foreach-Object { # # #get-VMGuest -VM $_ | # #write-host $vm # #get-VMGuest -VM $vm } | Foreach-Object{ # #write-output $vm.VmName >> $log # #write-output $vm.guest.VmName, get-VmGuest -VM $vm >> $log NO GOOD # # Write-host $vm.Guest.VmName #+ get-vmGuest -vm $VM >> $log # # # } # } I'm not sure why get-VmGuest fails though. I'm getting the scsi hardware, filtering the hardware to only get buslogic, and then wanting to get the operating system of just the filtered VMs. I don't see where my code fails though.

  Read the article

• Extract Distinct restful MVC routes from IIS logs

  - by Grummle

  This is a cross post from StackOverflow that after some consideration I believe can be asked here (not getting anything on SO). My shop is using MVC3/FUBU on IIS 7. I recently put something into production and I wanted to gather metrics from the IIS logs using log parser. I've done this many times before with file endpoints but because the MVC3 routes are of the form /api/person/{personid}/address/{addressid} the log saves /api/person/123/address/456 in the uristem column. Does anyone have any ideas on how to get data about specific routes from IIS logs? As an exmaple: Log Like this: cs-uri-stem /api/person/123/address/456 /api/person/121/address/33 /api/person/3555 /api/person/1555/address/5555 I want information about all where the route used was /api/person/{personid} so the count would be 1 in this case. Ideally what I'd like to figure out is how to do is is have IIS log the regex for the route that is choose for a particular url. So in the IIS logs have /api/person/{personid}/address/{addressid} in a column in addition to the cs-uristem /api/person/1555/address/5555

  Read the article

• Linux CentOS strange memory readings

  - by user2008937

  I am actually a young junior sys admin. I have a question - i am trying to understand how linux deals with memory... while playing around different monitoring programs I found some strange thing. When I run top on my laptop it shows me that FIREFOX process with pid 8778 takes 18,3% of memory (%MEM column). grep "MemTotal" /proc/meminfo Above command give me 1848336kb/1024 = 1805megs of memory (its ok - i have 2 gigs of ram). So if the firefox process takes 18,3% of MEM(according to tops %MEM column) then it takes 0.183 * 1805 which is approximately 325mb of memory. Quite a lot as for firefox... But well, in Linux there are lots of shared libraries that programs commonly uses (like famous libc). And those libraries are added to memory utilization of every process that uses it in the system, despite they are actually reading same file(single object in memory). So top may show too big mem utilization because of those shared libraries. Well, it is time to use PMAP which should show us the real mem utilization of process. But.. pmap -d $(pidof firefox) mapped: 983460K writeable/private: 757164K shared: 66416K so pmap shows that 983460/1024=993MB of memory is mapped to this process. It is in fact much bigger than mem utilization showed by top. Whats wrong here? How pmap can show more than top? even when top adds also the shared libraries (which in fact are single objects in memory) for each process that uses it? and pmap omits it? Regards Krzysztof

  Read the article

• How do I configure VMware View location-based printing to use Active Directory Groups?

  - by Jason Pearce

  I am attempting to configure VMware View 4.5's Location-Based Printing, which leverages an included OEM version of ThinPrint, to assign printers to active directory groups. The location-based printing feature maps printers that are physically near client systems to VMware View desktops. I am using the Active Directory group policy setting AutoConnect Location-based Printing for VMware View, which is located in the Microsoft Group Policy Object Editor in the Software Settings folder under Computer Configuration. The AutoConnect Location-based Printing for VMware View appearst to be just a name translation table. It permits me to assign a specific printer or printers to an IP Range, Client Name, Mac Address, User, or User Group. I'm attempting to assign printers to active directory user groups. I have created a new active directory group for each printer that I intend to use in VMware View desktop pools. I will then assign active directory users to the active directory groups that represent each network printer. Example: doej is a member of the PTR-FLOOR2-NORTH-ROOM255 active directory group. Using AutoConnect, I assigned the group to receive a network printer by adding PTR-FLOOR2-NORTH-ROOM255 in the User/Group column. Problem: When doej logs in to his VDI session, the printer is not present. However, if I use a wildcard "*" in the User/Group column instead of the specific PTR-FLOOR2-NORTH-ROOM255 active directory group, the printer is present and functions as designed. Alternatives: I have tried assigning printers to active directory groups within AutoConnect in the following ways, all unsuccesfull: PTR-FLOOR2-NORTH-ROOM255 domainexample\PTR-FLOOR2-NORTH-ROOM255 domainexample.local\PTR-FLOOR2-NORTH-ROOM255 Confirmation: The information used to map the printer to the VMware View desktop is stored in a registry entry on the View desktop in HKEY_LOCAL_MACHINE\SOFTWARE\Policies\thinprint\tpautoconnect. For each of these examples, I have reviewed the registry entry and can confirm that the desktop is receiving the information from the AutoConnect translation table. Summary: Can anyone provide an example of how to configure VMware View 4.5's Location-Based Printing so that I may assign network printers to active directory groups via the included AutoConnect tool? I would welcome a clear example of a working configuration. Thank you.

  Read the article

• Import data in Excel that doesn't have a row delimiter, but number of columns is known

  - by Alex B

  So i have this text file that looks something like this: Header1 Header2 Header3 Header4 A1 B1 C1 D1 A2 B2 C2 D2 and so on. When imported, I'd want the data to format itself in 4 columns. I tried the Get External Data from Text, and it successfully imports it, but it doesn't wrap it around, so it just keeps making columns for every space. I'd want it to go on the next line after 4 (in this case) elements have been added. What's the simplest way to achieve this? EDIT: My answer follows, since I'm not yet allowed to answer my own questions yet. The Excel function I needed is called indirect(). Not sure how it actually works though, so hopefully someone can help out with that, but the function call that worked for me is =INDIRECT(ADDRESS((ROW(A1)-1)*4+COLUMN(A1),1)) which i found over here: http://www.ozgrid.com/forum/showthread.php?t=101584&p=456031#post456031 Note: this required me to add the text to excel where i'd get this row full of columns, and then flip it so that i'd have a column full of rows.

  Read the article

• In which order does Excel process its formulae?

  - by dwwilson66

  I've got a fairly large spreadsheet with major calculations going on, and it's starting to slow down every time a value that's part of a calculated field is modified. I'm in the process of optimizing the file, adding arrays where I can, and seeing where I can shave off a few milliseconds here and there. Let's say there's data in Columns A-H. Column H is set based on relationships between values in Columns A, B and C, which change dynamically from an outside program. Users enter the data in Column F. Formulas in D & E calculate relationships between F & H and H & D, respectively. How does Excel manage formulae in the case, for instance, where they're dependent on data further into the sheet? Will my value in H be available the first time that the formulae in D & E calculate? or, will D & E calculate based on an old value for H, because H's update hasn't happened yet? Are there any efficiencies to be gained by positioning dependencies in particular rows or columns in the speadsheet? Do positions above and left the current position get processed sooner than things below and to the right?

  Read the article

• xen + debian network after upgrade squeeze to wheeze

  - by rush

  I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

  Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >