Search Results

Search found 15985 results on 640 pages for 'debug print'.

Page 337/640 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • DirectAccess client can't connect

    - by odd parity
    I've set up a DirectAccess server on Windows Server 2012 at my workplace. I'm using a Windows 8 Enterprise client to connect to it. It works fine over a mobile connection, but it fails when connecting from home. I've ruled out the firewall/router as the culprit as the issues persist when connecting the laptop directly to the cable modem. I'm not sure where to begin to debug this, does anyone have any pointers? Both Teredo and IPHTTPS interfaces are up (although as the server is behind a NAT and we only have 1 public IP I understand that IPHTTPS is the only protocol that will be used). The IPHTTPS tunnel also seems to be connected: netsh interface httpstunnel show interfaces Interface IPHTTPSInterface (Group Policy) Parameters ------------------------------------------------------------ Role : client URL : https://redacted:443/IPHTTPS Last Error Code : 0x0 Interface Status : IPHTTPS interface active however the DirectAccess link can't be activated - get-daconnectionstatus cycles between Status : Error Substatus : CouldNotContactDirectAccessServer and Status : Error Substatus : RemoteNetworkAuthenticationFailure Any suggestions on how to attack this are appreciated!

    Read the article

  • fatal: git-http-push-failed (return code 22)

    - by Mariusz
    Hello, that's me again. After having problem with estabilishing connection to github.com now I have a problem with next step - pushing. I need to mention, that I am novice at GIT service, and this whole Distributed Subversion Checking Systems world.. I have done git init, then git add *.h and git add *.cpp, but currently git status does not print anything in "# On branch master" section? Previously It was correctly printing whole list of added files, now this list is gone. Nextly, I have executed: git remote add origin https://github.com/mgeeky/disasm.git and error has occured after: git push origin master Username: Password: error: Cannot access URL https://github.com/mgeeky/disasm.git/, return code 22 fatal: git-http-push failed What should I do now? I've tried: git push origin Username: Password: No refs in common and none specified; doing nothing. Perhaps you should specify a branch such as 'master'. Everything up-to-date But it seems to be okey.

    Read the article

  • s3fs Input/output error

    - by shadow_of__soul
    i'm trying to set up a backup system with s3fs and the amazon s3 service. i followed this 2 guides: http://qugstart.com/blog/linux/how-to-mount-an-amazon-s3-bucket-as-virtual-drive-on-centos-5-2/ http://blog.eberly.org/2008/10/27/how-i-automated-my-backups-to-amazon-s3-using-rsync/ anyway making a tail to the /var/log/messages i get: Aug 28 13:37:46 server s3fs:###response=403 i already tried creating the authentication file on /etc/passwd-s3fs and setting there the access and private key, passing it trough the command line, i checked several times the credentials and i used it with s3fox, and is working. i also have set the time of the machine (with the date command) to be the same as the amazon S3 servers (i got the time of the S3 server uploading a file with the file manager) not only rsync don't work, commands like ls or cp in the /mnt/s3 didn't work also. any help of how i can solve/debug this? Regards, Shadow.

    Read the article

  • Sharepoint 2010, 404 error after installation

    - by Tommy Jakobsen
    Running Windows Server 2008 Standard R2, SQL Server 2008 Enterprise, Team Foundation Server 2010, I installed Sharepoint Server 2010 (single server). It installed correctly, and the wizard configured it without errors. When accessing the sharepoint server through http://localhost/ I get a 404 error. I also get a 404 when trying to access the admin interface on port 42620. Sharepoint, TFS and Reporting services are the only application on my IIS. NOT sharing the same port, so that can't be the error. Do you have any ideas what the problem can be? Is there some way that I can debug this?

    Read the article

  • heartbeat: Bad nodename in /etc/ha.d//haresources [node1]

    - by Richard
    I'm trying to start heartbeat on Ubuntu 10.04 with service heartbeat start, but getting the following errors: heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Bad nodename in /etc/ha.d//haresources [node1] heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Configuration error, heartbeat not started. On on server uname -n produces loadb1, on the second server uname -n produces loadb2. The two servers can ping each other okay with those names. This is /etc/ha.d/ha.cnf on both servers: debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 keepalive 2 deadtime 10 udpport 694 bcast eth1 ucast eth0 my.external.ip ucast eth0 my.external.ip ucast eth1 10.0.0.5 ucast eth1 10.0.0.6 #udp eth0 node loadb1 node loadb2 auto_failback off And this is /etc/ha.d/haresources on both servers: node1 IPaddr::46.20.121.113 httpd smb dhcpd Authkeys is also set up. What am I doing wrong? The part where I'm least clear is the ucast/bcast lines.

    Read the article

  • Continual "The Windows Filtering Platform has blocked a connection" errors?

    - by Richard
    Our systems have been compromised by something recently which has lead us to carry out a more detailed look at what is happening on our workstations. I have noticed an issue where the Security log of this Windows 7 workstation is continually logging a security "Audit Failure" where the detail is that "The Windows Filtering Platform has blocked a connection". This is happening thousands of times a day and would appear to be our BT Business Broadband HGV 2700 ADSL router attempting to connect to Port 137 (NET Bios) on my workstation and being blocked. This has unfortunately had the effect of filling up the log files so much that anything which might have been of use which was logged over the weekend to help debug the intrusion has been "overwritten off the end" of the Security log. (I've since increased the log file size limits massively and turned on archiving). Does anyone know if this is standard behaviour of a BT ADSL router or whether this indicates that the router is compromised in some way or malfunctioning, or have any further suggestions as to how to diagnose this problem?

    Read the article

  • How to set a management IP on a Dell powerconnect 5524/5548 switch?

    - by John Little
    When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

    Read the article

  • xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context

    - by mmc18
    When I executed xl2tpd I amhaving following error. # xl2tpd -D xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context xl2tpd[845]: init: Unable to load config file When I remove the "line 13" I having same error with "Line 14" thefore I do not think that the problem is about "ipsec sared" Here is my configuration file xl2tpd.conf. LINUX Ubuntu 12.0.4 ;Openswan IPsec 2.6.37; xl2tpd version: xl2tpd-1.3.1 ; [global] ipsec sared=yes listen-addr=47.168.137.27 ; [lns default] ip range = 192.168.1.10-192.168.1.20 local ip = 192.168.1.1 require chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes name=LinuxIPSECVPN ANSWER:(since have not enough reputation I am writting it over here.) removing the ";" character at the beginning of [global] and [lns default] have solved the issue. At fist I tought that [global] and[lns default] were just a comment.

    Read the article

  • Windows 7 Drivers for Hp Tx2000 tablet Pc

    - by iceman
    Has anyone tried the new tablet features of windows 7 on the Hp tablet TX2001au : http://h10025.www1.hp.com/ewfrf/wc/product?product=3653674&lc=en&dlc=&cc=us&lang=&softwareitem=ob-77258-1&dest_page=product&os=4062 ? Hp has only Vista drivers and no Windows 7 drivers yet : link and link The main issues after installing Windows 7 is that the graphics card (Nvidia GeForce Go 6150) and the coprocessor are not detected.The latest 191.07 GeForce/ION Driver installer says that it cannot find any compatible hardware by the way, i still haven't been able to get Xp running on this . The Nvidia GeForce Go 6150 driver seems to be customized by HP !! If you install the laptopvideo2go.com/ drivers on Xp(after MS nags that it can't verify the publisher of the driver) , it shows the blue screen of death. Is there a way to debug the BSOD ?

    Read the article

  • "Not enough memory" error when running Peachtree Accounting 2010 with Logmein

    - by Justin Bowers
    I setup one of my clients with a Logmein Pro account recently and everything has been running fine so far. Today, however, my client received an error when they were logged into their work computer remotely and tried to run a report from Peachtree Accounting 2010. The error states: "Not enough memory to run" and she can't print the report. I looked online and found another user that had this same problem with Peachtree 2010 when connected via Logmein here. The error doesn't happen if the user runs the report while sitting at her work computer, but it always happens when connected via Logmein. I know most of you will push it off as just a Logmein issue, which I'm sure it is - but I would like any constructive input from anyone else who may have had the same or similar problem. Thanks, Justin

    Read the article

  • Problems connecting to MS Dynamics AX 2009 Application Object Server

    - by Sam
    I've got a funny problem connecting to an AOS server. I got a domain network containing a (VM) Server running the Application Object Server (AOS). Client computer A) can connect to the AOS without problems and work. When client computer B) tries to connect, all I get is this error message: Logon Error Connection with the Application Object Server could not be established. The event log of Client B) does not contain any messages about this. Firewalls are off on all three computers (by GP). Tcp/ip from cliebt B) to the AOS server does run fine. Both clients run the same OS (win 7 RC), sit on the same subnet, next to each other. Yesterday it all worked, today just one computer can connect. Any ideas what might cause this problem, how to resolve it, or how to debug it?

    Read the article

  • Cross domain javascript form filling, reverse proxy

    - by Michel van Engelen
    I need a javascript form filler that can bypass the 'same origin policy' most modern browsers implement. I made a script that opens the desired website/form in a new browser. With the handler, returned by the window.open method, I want to retrieve the inputs with theWindowHandler.document.getElementById('inputx') and fill them (access denied). Is it possible to solve this problem by using Isapi Rewrite (official site) in IIS 6 acting like a reverse proxy? If so, how would I configure the reverse proxy? This is how far I got: RewriteEngine on RewriteLogLevel 9 LogLevel debug RewriteRule CarChecker https://the.actualcarchecker.com/CheckCar.aspx$1 [NC,P] The rewrite works, http://ourcompany.com/ourapplication/CarChecker, as evident in the logging. From within our companysite I can run the carchecker as if it was in our own domain. Except, the 'same origin policy' is still in force. Regards, Michel

    Read the article

  • Is Mac OS X a licensed Unix or Unix-like clone that conforms to Unix specification?

    - by KMC
    Is Mac OS X developed on a licensed Unix or is it a Unix-like clone that, unlike Linux, conforms to Unix specification well enough to be registered as a Unix OS. Not until Leopard, Mac OS X did not gain the Unix certification. But in Leopard, Terminal still print: GNU bash, version 3.2.48(1)-release (x86_64-apple-darwin10.0) But GNU is GNU's not Unix, and Mac OS X is registered as Unix. That gets me confused whether OS X is unix or unix-like. In other words, is OS X written on top of Unix or a re-write of Unix that is as Unix as it can possible be. May be along the answer someone can provide lineage or other background information. I would also recommend reading How Unix is Mac OS X.

    Read the article

  • Openswan + xl2tpd connections time out after a while

    - by Halfgaar
    I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

    Read the article

  • Web Client Service constantly in 'Stopping' state

    - by Mark
    I have a user who's Web Client service constantly reports that it's in the 'Stopping' state and it's hindering her ability to save JMP files to a SharePoint site using the UNC path. She's running Windows XP Service Pack 3. I've tried modifying the Web Client parameters in the registry for UseBasicAuth and FileAttributesLimitInBytes with no luck. When I set the service to Manual and then try to start it after Windows boots up, it starts and then immediately goes into the Stopping state again. Other things I've tried: Removing/Reinstalling her network card Removing/Reinstalling the Client for Microsoft Networks and File and Print Sharing Checked that the BITS and RPC services are running fine (not sure if they're related) Does anyone have any other ideas? Is there a way to repair/rebuild the Web Client service?

    Read the article

  • Google Talk Chat/Conference Solutions

    - by Adam Davis
    I started using the old confbot python conference script in 2005 for my family. This essentially implements an IRC like conference room over Google Talk (or any Jabber/XMPP server). It has significantly increased family communication, and has become rather indispensable due to this. Recently it's begun to have severe problems (people can't see each other in the conference room) which has nearly killed the usefulness of it. Before I develop my own software or debug confbot (probably not - it uses an older jabber library that hasn't been updated since 2003) I wanted to see what other solutions exist that meet our needs: Supports Google Talk (Sorry, I'm not going to try to convince everyone involved to move to a new IM or other client) Free and open source (ideal, but not required) Runs on Windows (Not a web service run by someone else) Implements basic functionality such as kick/ban, emotes Remembers who joined the conference room across restarts Obeys Do Not Disturb and Busy status Archives all activity -Adam

    Read the article

  • Crashing HVM domain, what do I do?

    - by rassie
    My DomUs on a Xen 3.4 on an RHEL5 are crashing when too much memory is needed: (XEN) p2m_pod_demand_populate: Out of populate-on-demand memory! (XEN) domain_crash called from p2m.c:1091 (XEN) Domain 15 (vcpu#3) crashed on cpu#2: (XEN) ----[ Xen-3.4.0 x86_64 debug=n Not tainted ]---- (XEN) CPU: 2 (XEN) RIP: 0010:[<ffffffff80062c02>] (XEN) RFLAGS: 0000000000010216 CONTEXT: hvm guest (XEN) rax: 0000000000000000 rbx: 0000000000000001 rcx: 000000000000003f (XEN) rdx: 0000000004812000 rsi: ffff810001000000 rdi: ffff810004812000 (XEN) rbp: 0000000000000282 rsp: ffff810007635cf0 r8: ffff810037c0288e (XEN) r9: 00000000000023e1 r10: 0000000000000000 r11: 0000000000000001 (XEN) r12: ffff81000000cb00 r13: ffff8100007e43f0 r14: ffff81000000fc10 (XEN) r15: 00000000000280d2 cr0: 0000000080050033 cr4: 00000000000006e0 (XEN) cr3: 0000000006760000 cr2: 0000000003d47078 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: 0010 Can I disable populate-on-demand for HVM somehow? Xen 3.3 didn't exhibit such behaviour...

    Read the article

  • Looking for a manual/how-to for installing a Canon iRunner 210s network printer

    - by Ssvarc
    A client has a Canon iRunner210S and is complaining about slow print speeds. I've searched for a install manual online but came up empty. A call to Canon technical referred me to their dealer network for service, as as informing me that there isn't a manual available on their website. Anyone know how to install these and/or have a link to a manual? The current setup has the printers on a LAN Manager printer port instead of on straight IP ports. Is this normal for this printer? And what exactly are Lan Manager ports (based on my research, they appear to be a way to authenticate a connection)?

    Read the article

  • How to install a Canon iRunner 210s

    - by Ssvarc
    A client has a Canon iRunner210S and is complaining about slow print speeds. I've searched for a install manual online but came up empty. A call to Canon technical referred me to their dealer network for service, as as informing me that there isn't a manual available on their website. Anyone know how to install these and/or have a link to a manual? The current setup has the printers on a LAN Manager printer port instead of on straight IP ports. Is this normal for this printer? And what exactly are Lan Manager ports (based on my research, they appear to be a way to authenticate a connection)?

    Read the article

  • Running Java from a Windows batch file causes the batch file to stop

    - by jjkparker
    When I run Java from a Windows .cmd file (Vista 32-bit here), the Java command causes the batch file to stop executing additional commands. For example, this is a simple test.cmd file: java java This should cause Java to print its help message twice. However when I run it in cmd.exe, I get this: C:\>test C:\>java Usage: java [-options] class [args...] (to execute a class) or java [-options] -jar jarfile [args...] (to execute a jar file) where options include: -client to select the "client" VM -server to select the "server" VM ... C:\> The batch file simply exits when Java exits. What's going on here?

    Read the article

  • Network Scanning: HP Laserjet 2840 & Windows 7 (+ Linux?)

    - by Eddie Parker
    I own a HP Laserjet 2840 multifunction printer. It's a fabulous device, but on Windows 7 it can't network scan. HP doesn't seem to support it in anything greater than Vista, and they aren't forth coming with solutions. I'm curious if anyone else has gotten work arounds to this problem. One possible avenue for me is that I have an always-on Gentoo server that is configured to see the printer as a fax and printer using hplip. I have this shared via samba and I can print just fine through samba. Is there a similar way I can do network scanning? Anyone know of where I start looking for this?

    Read the article

  • Microsoft Office 2013 Issue

    - by Liz
    A few days ago I opened my microsoft office programs and discovered taht they are missing the editing icons at the top, some of them will appear if you scroll over them, but not all. Also, in PowerPoint the slides show in the side window with a red "x" I have tried to uninstall and reinstall office 2013, but I have had no luck. This issue is in every office program (excel, PP, word, access, outlook, etc). I also can't see the text when I type. Its there, I can see it when I print the document, but nothing on the screen. Does anyone have a solution for this issue??

    Read the article

  • How do I install an HP home-use printer on Windows Home Server (Windows Server 2003)

    - by Rob Allen
    I have an HP DeskJet F4210 printer that I would like to share on my network via Windows Home Server. Unfortunately, the driver installation checks for supported OS's, detects Home Server as Windows Server 2003 and exits. The driver install supports WinXP, W2k, Vista, and Win98SE. In theory, drivers for XP or Windows 2000 should work fine with Home Server. When using the "Install Printer" tool in Home Server I am only able to select .inf files (there are serveral on the install media) but the driver folders for XP and 2000 have .sys and .dll files. How can I bypass HP's short-sighted install program and get this printer up and running on Home server? I'll be happy with basic print functionality and will save the task of enabling scanning for another time.

    Read the article

  • installed openstack using devstack install shell script but getting 500 error when i try opening dashboard

    - by Arvind
    I followed the instructions at http://devstack.org/guides/single-machine.html to install OpenStack. I first installed Ubuntu on my Windows 7 PC using the officially supported Windows installer for Ubuntu 12.04 LTS. And after that I followed the instructions at above page to install OpenStack. As per instructions, I should be able to access the dashboard aka Horizon, at http://192.168.1.4/ (thats the IP of the PC on which I installed Ubuntu-OpenStack). However I am getting a 500 error web page when I open that. How do I resolve this error? I want to set up a dev environment for OpenStack. For your ref, the whole error message is given now-- FilterError at / /usr/bin/env: node: No such file or directory Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Exception Type: FilterError Exception Value: /usr/bin/env: node: No such file or directory Exception Location: /usr/local/lib/python2.7/dist-packages/compressor/filters/base.py in input, line 133 Python Executable: /usr/bin/python Python Version: 2.7.3 Python Path: ['/opt/stack/horizon/openstack_dashboard/wsgi/../..', '/opt/stack/python-keystoneclient', '/opt/stack/python-novaclient', '/opt/stack/python-openstackclient', '/opt/stack/keystone', '/opt/stack/glance', '/opt/stack/python-glanceclient/setuptools_git-0.4.2-py2.7.egg', '/opt/stack/python-glanceclient', '/opt/stack/nova', '/opt/stack/horizon', '/opt/stack/cinder', '/opt/stack/python-cinderclient', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7', '/usr/lib/python2.7/plat-linux2', '/usr/lib/python2.7/lib-tk', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntu-sso-client', '/usr/lib/python2.7/dist-packages/ubuntuone-client', '/usr/lib/python2.7/dist-packages/ubuntuone-control-panel', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol', '/opt/stack/horizon/openstack_dashboard'] Server time: Sat, 27 Oct 2012 08:43:29 +0000 Error during template rendering In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 {% load compress %} 2 3 {% compress css %} 4 <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 {% endcompress %} 6 7 <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 Also, the traceback is now given below-- Environment: Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Python Version: 2.7.3 Installed Applications: ('openstack_dashboard', 'django.contrib.contenttypes', 'django.contrib.auth', 'django.contrib.sessions', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'compressor', 'horizon', 'openstack_dashboard.dashboards.project', 'openstack_dashboard.dashboards.admin', 'openstack_dashboard.dashboards.settings', 'openstack_auth') Installed Middleware: ('django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'horizon.middleware.HorizonMiddleware', 'django.middleware.doc.XViewMiddleware', 'django.middleware.locale.LocaleMiddleware') Template error: In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 : {% load compress %} 2 : 3 : {% compress css %} 4 : <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 : {% endcompress %} 6 : 7 : <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 : Traceback: File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py" in get_response 111. response = callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/vary.py" in inner_func 36. response = func(*args, **kwargs) File "/opt/stack/horizon/openstack_dashboard/wsgi/../../openstack_dashboard/views.py" in splash 38. return shortcuts.render(request, 'splash.html', {'form': form}) File "/usr/local/lib/python2.7/dist-packages/django/shortcuts/__init__.py" in render 44. return HttpResponse(loader.render_to_string(*args, **kwargs), File "/usr/local/lib/python2.7/dist-packages/django/template/loader.py" in render_to_string 176. return t.render(context_instance) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render 155. return self.render_template(self.template, context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render_template 137. output = template.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render 147. return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_compressed 107. rendered_output = self.render_output(compressor, mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_output 119. return compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 51. ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 53. return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in output 230. content = self.filter_input(forced) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in filter_input 192. for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in hunks 167. precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in precompile 210. command=command, filename=filename).input(**kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/filters/base.py" in input 133. raise FilterError(err) Exception Type: FilterError at / Exception Value: /usr/bin/env: node: No such file or directory

    Read the article

  • Random haproxy 408 errors

    - by Errol Fitzgerald
    I keep getting random 408 timeout messages from haproxy, but can't figure out if its a bug in 1.5-dev25 or something in my config file global log 127.0.0.1 local0 log 127.0.0.1 local1 info #log loghost local0 info maxconn 80000 #debug #quiet user haproxy group haproxy stats socket /tmp/haproxy.sock defaults log global mode http errorfile 503 /etc/haproxy/errors/503.http option httplog option dontlognull retries 3 option redispatch maxconn 80000 timeout client 12s timeout server 120s timeout queue 120s timeout connect 10s timeout http-request 30s option http-server-close timeout http-keep-alive 3000 option abortonclose option httpchk ... Does anyone see anything wrong with these config settings?

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >