Search Results

Search found 15364 results on 615 pages for 'static assert'.

Page 337/615 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

• Canon MG6100 series USB Printer not mounting

  - by user35201

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• ESXi boot time with 9 iSCSI targets

  - by Myles Gray

  Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

  Read the article

• Tweaking log4net Settings Programmatically

  - by PSteele

  A few months ago, I had to dynamically add a log4net appender at runtime.  Now I find myself in another log4net situation.  I need to modify the configuration of my appenders at runtime. My client requires all files generated by our applications to be saved to a specific location.  This location is determined at runtime.  Therefore, I want my FileAppenders to log their data to this specific location – but I won't know the location until runtime so I can't add it to the XML configuration file I'm using. No problem.  Bing is my new friend and returned a couple of hits.  I made a few tweaks to their LINQ queries and created a generic extension method for ILoggerRepository (just a hunch that I might want this functionality somewhere else in the future – sorry YAGNI fans): public static void ModifyAppenders<T>(this ILoggerRepository repository, Action<T> modify) where T:log4net.Appender.AppenderSkeleton { var appenders = from appender in log4net.LogManager.GetRepository().GetAppenders() where appender is T select appender as T;   foreach (var appender in appenders) { modify(appender); appender.ActivateOptions(); } } Now I can easily add the proper directory prefix to all of my FileAppenders at runtime: log4net.LogManager.GetRepository().ModifyAppenders<FileAppender>(a => { a.File = Path.Combine(settings.ConfigDirectory, Path.GetFileName(a.File)); }); Thanks beefycode and Wil Peck. Technorati Tags: .NET,log4net,LINQ

  Read the article

• Initializing OpenFeint for Android outside the main Application

  - by Ef Es

  I am trying to create a generic C++ bridge to use OpenFeint with Cocos2d-x, which is supposed to be just "add and run" but I am finding problems. OpenFeint is very exquisite when initializing, it requires a Context parameter that MUST be the main Application, in the onCreate method, never the constructor. Also, the main Apps name must be edited into the manifest. I am trying to fix this. So far I have tried to create a new Application that calls my Application to test if just the type is needed, but you do really need the main Android application. I also tried using a handler for a static initialization but I found pretty much the same problem. Has anybody been able to do it? This is my working-but-not-as-intended code snippet public class DerpHurr extends Application{ @Override public void onCreate() { super.onCreate(); initializeOpenFeint("TestApp", "edthedthedthedth", "aeyaetyet", "65462"); } public void initializeOpenFeint(String appname, String key, String secret, String id){ Map<String, Object> options = new HashMap<String, Object>(); options.put(OpenFeintSettings.SettingCloudStorageCompressionStrategy, OpenFeintSettings.CloudStorageCompressionStrategyDefault); OpenFeintSettings settings = new OpenFeintSettings(appname, key, secret, id, options); //RIGHT HERE OpenFeint.initialize(***this***, settings, new OpenFeintDelegate() { }); System.out.println("OpenFeint Started"); } } Manifest <application android:debuggable="true" android:label="@string/app_name" android:name=".DerpHurr">

  Read the article

• Box2D how to implement a camera?

  - by Romeo

  By now i have this Camera class. package GameObjects; import main.Main; import org.jbox2d.common.Vec2; public class Camera { public int x; public int y; public int sx; public int sy; public static final float PIXEL_TO_METER = 50f; private float yFlip = -1.0f; public Camera() { x = 0; y = 0; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public Camera(int x, int y) { this.x = x; this.y = y; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void update() { sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void moveCam(int mx, int my) { if(mx >= 0 && mx <= 80) { this.x -= 2; } else if(mx <= Main.APPWIDTH && mx >= Main.APPWIDTH - 80) { this.x += 2; } if(my >= 0 && my <= 80) { this.y += 2; } else if(my <= Main.APPHEIGHT && my >= Main.APPHEIGHT - 80) { this.y -= 2; } this.update(); } public float meterToPixel(float meter) { return meter * PIXEL_TO_METER; } public float pixelToMeter(float pixel) { return pixel / PIXEL_TO_METER; } public Vec2 screenToWorld(Vec2 screenV) { return new Vec2(screenV.x + this.x, yFlip * screenV.y + this.y); } public Vec2 worldToScreen(Vec2 worldV) { return new Vec2(worldV.x - this.x, yFlip * worldV.y - this.y); } } I need to know how to modify the screenToWorld and worldToScreen functions to include the PIXEL_TO_METER scaling.

  Read the article

• Installation experiences with NDepend under Win7/64 with restricted user permissions

  - by Marko Apfel

  Today Patrick gives me a new license for his static code analysis tool NDepend for my fresh machine with Win7/64. This platform is new for me, so some things are different to Win XP. Maybe that till yet some of these things are not well enough understandanded from me. So i stepped in some traps. Here are my notes to get NDepend running. Download of NDepend Professional Edition from http://www.ndepend.com/NDependDownload.aspx   Extracted to c:\program files (x86)\NDepend   Started NDepend.Install.VisualStudioAddin.exe this failed with Okay – sounds plausible.   Copy NDependProLicense.xml to this folder   Next try with NDepend.Install.VisualStudioAddin.exe opens the integration dialog   Registering in Visual Studio failed with   Manually unblock as described (first solution hint)   and here comes my largest understanding problem. After unblocking this file   and closing this dialog the next opening shows the blocking again: Why? So the same error during integration pops up.   Okay – tried the second solution hint with copying folders Copy all to a full accessable folder under c:\temp\   Now the installation works   looks good   copying the folders back to c:\program files (x86)\NDepend   starting Visual Studio failed with     Okay – copying the folder to a private application folder c:\users\apf\My Applications\NDepend   Installing again   Now Visual Studio runs and NDepend is integrated Nevertheless my machine is only used by me, i prefer “all user”-installations. The described way works sadly only for my account.

  Read the article

• Algorithm for dynamically calculating a level based on experience points?

  - by George

  One of the struggles I've always had in game development is deciding how to implement experience points attributed to gaining a level. There doesn't seem to be a pattern to gaining a level in many of the games I've played, so I assume they have a static dictionary table which contains experience points vs. the level. e.g. Experience Level 0 1 100 2 175 3 280 4 800 5 ...There isn't a rhyme or reason why 280 points is equal to level 4, it just is. I'm not sure how those levels are decided, but it certainly wouldn't be dynamic. I've also thought about the possibility of exponential levels, as not to have to keep a separate lookup table, e.g. Experience Level 0 1 100 2 200 3 400 4 800 5 1600 6 3200 7 6400 8 ...but that seems like it would grow out of control rather quickly, as towards the upper levels, the enemies in the game would have to provide a whopping amount of experience to level -- and that would be to difficult to control. Leveling would become an impossible task. Does anyone have any pointers, or methods they use to decide how to level a character based on experience? I want to be fair in leveling and I want to stay ahead of the players as not to worry about constantly adding new experience/level lookups.

  Read the article

• datacenter network change control best practices

  - by jpolache

  I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

  Read the article

• Touchpad stops working when plugging in new laptop PSU

  - by drahcir

  I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

  Read the article

• Accessing through VPN, which internet connection would be used

  - by Sriram

  I've a data card which has a limit of 2 GB up/download traffic per month. I've an office internet line which has an unlimited up/download. I've successfully connected to VPN using my data card and by changing certain configurations like DNS etc., have also been able to use my office line for internet (verified by doing a IP check - returns the static IP of our office). Now to my question - is it just a NAT which is happening or am I actually using my office line for all communication. Which one would reflect the usage/trace. The data card usage log at this moment does not reflect any usage (which is confusing since the VPN is over the data card connection). Further more (theoretically), would the net be any faster if my office line is let us say 8Mbps and the data card is 512kbps by doing this as against directly connecting the internet using the data card.

  Read the article

• [SOLVED]Need help with remote dekstop - Limit the computers you can access server from

  - by stirredo

  I have a windows server 2003 computer that is accessed by remote desktop connection. To access the server all you need to know is the IP address of the computer. I want to limit the computers that can access the windows server computer to authorized computers only. The authorized computers won't have static IPs, so I cannot limit them on basis of IP address. Can I limit them on basis of MAC id perhaps? I won't mind using third party solution like Teamviewer or Logmein etc. So How can I solve this problem? EDIT: Found a possible solution in team viewer. Team viewer creates a unique partner ID for the computer it is installed on. It has an option for allowing only authorized partner IDs to access the computer. Problem solved.

  Read the article

• MyMessageBox for Phone and Store apps

  - by Daniel Moth

  I am sharing a class I use for both my Windows Phone 8 and Windows Store app projects. Background and my requirements For my Windows Phone 7 projects two years ago I wrote an improved custom MessageBox class that preserves the well-known MessageBox interface while offering several advantages. I documented those and shared it for Windows Phone 7 here: Guide.BeginShowMessageBox wrapper. Aside: With Windows Phone 8 we can now use the async/await feature out of the box without taking a dependency on additional/separate pre-release software. As I try to share code between my existing Windows Phone 8 projects and my new Windows Store app projects, I wanted to preserve the calling code, so I decided to wrap the WinRT MessageDialog class in a custom class to present the same MessageBox interface to my codebase. BUT. The MessageDialog class has to be called with the await keyword preceding it (which as we know is viral) which means all my calling code will also have to use await. Which in turn means that I have to change my MessageBox wrapper to present the same interface to the shared codebase and be callable with await… for both Windows Phone projects and Windows Store app projects. Solution The solution is what the requirements above outlined: a single code file with a MessageBox class that you can drop in your project, regardless of whether it targets Windows Phone 8, or Windows 8 Store apps or both. Just call any of its static Show functions using await and dependent on the overload check the return type to see which button the user chose.// example from http://www.danielmoth.com/Blog/GuideBeginShowMessageBox-Wrapper.aspx if (await MyMessageBox.Show("my message", "my caption", "ok, got it", "that sucks") == MyMessageBoxResult.Button1) { // Do something Debug.WriteLine("OK"); } The class can be downloaded from the bottom of my older blog post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• Compiling to a binary from source

  - by Chords

  I'm using WKHTMLTOPDF on a 64-bit Linux server and I'm running into problems with the version. Seen here: http://code.google.com/p/wkhtmltopdf/downloads/list There's slim pickins when it comes to pre-compiled binaries. I started with version 0.9.9 which has a few bugs. I upgraded to 0.11.0 RC 1 to find a slew of new problems, namely the following: http://code.google.com/p/wkhtmltopdf/issues/detail?id=730 I think 0.10 RC 2 would work, and the thread above suggests compiling from the source has a fix for the error I'm getting, but I don't know how to do that. Can anyone explain how I can create a static binary myself, or would anyone be willing to create and post one for the countless people waiting for this fix?

  Read the article

• Serve WordPress from root of site on Bitnami EC2 Ubuntu image

  - by user57087

  Running Bitnami's Ubuntu Wordpress Image on Amazon EC2. By default the WordPress install is at /wordpress and there is a static index.html file in the root. How do I configure Apache and WordPress to serve from the root instead of /wordpress? I have tried the instructions on this page: http://digitivity.org/10/how-to-serve-your-wordpress-blog-from-the-root-directory-if-its-installed-in-a-subdirectory without success. I have tried changing the document root to the folder serving the wordpress content, but that just breaks WordPress. I know I am missing something simple, but not sure what. Any help would be appreciated.

  Read the article

• Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

  - by Michael

  Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

  Read the article

• dd-wrt Bonjour/ netbios etc on two subnets

  - by user72182

  Hi I was wondering if any clever people out there could help me. I have a network setup with two different subnets 192.168.1.0 and 192.168.0.0 one router is connected to a VPN (via OpenVPN) the other is not. Both routers have static routes to each other and a device on one can communicate to another without issues when using IP addresses. My problem is I want to use services like Bonjour, Netbios and Apple Talk across the two networks, which currently does not work. A laptop connected on one subnet will not see a laptop connected on another. Is there anyway that you can connect the two networks together so these sort of local service will work??? I guess I have to forward the boardcast packets but I have no idea how to do this. Thanks for any help...

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Designing Content-Based ETL Process with .NET and SFDC

  - by Patrick

  As my firm makes the transition to using SFDC as our main operational system, we've spun together a couple of SFDC portals where we can post customer-specific documents to be viewed at will. As such, we've had the need for pseudo-ETL applications to be implemented that are able to extract metadata from the documents our analysts generate internally (most are industry-standard PDFs, XML, or MS Office formats) and place in networked "queue" folders. From there, our applications scoop of the queued documents and upload them to the appropriate SFDC CRM Content Library along with some select pieces of metadata. I've mostly used DbAmp to broker communication with SFDC (DbAmp is a Linked Server provider that allows you to use SQL conventions to interact with your SFDC Org data). I've been able to create [console] applications in C# that work pretty well, and they're usually structured something like this: static void Main() { // Load parameters from app.config. // Get documents from queue. var files = someInterface.GetFiles(someFilterOrRegexPattern); foreach (var file in files) { // Extract metadata from the file. // Validate some attributes of the file; add any validation errors to an in-memory // structure (e.g. List<ValidationErrors>). if (isValid) { // Upload using some wrapper for an ORM an someInterface.Upload(meta.Param1, meta.Param2, ...); } else { // Bounce the file } } // Report any validation errors (via message bus or SMTP or some such). } And that's pretty much it. Most of the time I wrap all these operations in a "Worker" class that takes the needed interfaces as constructor parameters. This approach has worked reasonably well, but I just get this feeling in my gut that there's something awful about it and would love some feedback. Is writing an ETL process as a C# Console app a bad idea? I'm also wondering if there are some design patterns that would be useful in this scenario that I'm clearly overlooking. Thanks in advance!

  Read the article

• Resolving real IP address out of a dynamic dns address

  - by stavnir

  I recently opened a dynamic dns user (at no-ip for that matter..) for my own personal needs and especially for ssh-ing my computer whenever I need to, without knowing it's static IP. My questions are: Am I misusing the concept of dynamic dns? Are there more appropriate methods to do what I want to do? If not, how do I resolve my router's real ip address? Firefox somehow manages to do so, nslookup and other similar commands only resolve the ip of the ddns server (e.g. no-ip.org). Trying to figure this mystery with wireshark failed miserably ;)

  Read the article

• "Recipient address rejected" when sending an email to an external address with sendgrid

  - by WJB

  In postfix, I'm using relay_host to send an email to an external address using sendgrid, but I get an error about local ricipient table when sending an email from my PHP code. This is my main.cf in /postfix/ ## -- Sendgrid smtp_sasl_auth_enable = yes smtp_sasl_password_maps = static:username:password smtp_sasl_security_options = noanonymous smtp_tls_security_level = may header_size_limit = 4096000 relayhost = [smtp.sendgrid.net]:587 This is the error message from the log: postfix/smtpd[53598]: [ID 197553 mail.info] NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 550 5.1.1 Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<localhost.localdomain> One interesting thing is when I use "sendmail [email protected]" from the command line, the email is delivered successfully using SendGrid. I think it's because this uses postfix/smtp instead of postfix/smtpD the log for this says, postfix/smtp[18670]: [ID 197553 mail.info] AAF7313A7E: to=, relay=smtp.sendgrid.net[50.97.69.148]:587, delay=4.1, delays=3.5/0.02/0.44/0.18, dsn=2.0.0, status=sent (250 Delivery in progress) Thank you

  Read the article

• How does Router know where to forward packet

  - by kornelijepetak

  If several computers with local addresses (192.168.0.#) are connected to a router and each computer opens a web browser and requests a page over HTTP, when these TCP:80 packets are sent out, the router switches the local address with the static IP of the router (i.e. Provider given IP) so the server can reply to the appropriate address. But how does the router know to which computer to forward the HTTP reply, since the TCP header does not contain the local IP address (does it?), and all computers are using port 80? Does this have anything to do with the MAC addresses? How exactly does this work?

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• How do I clean a computer from dust?

  - by Jonas

  As computers become faster and generate more heat it gets more important to have good ventilation, but that also increases the amount of dust sticking to the components of the computer. It's of course better to make sure the computer never gets dusty by vacuum cleaning around it (not in it) frequently. But what to do if it's already to late? I've heard that vacuum cleaning the computer itself is very bad, since it can cause static electricity that hurts the computer. So, Does anyone have any tips for how to remove dust from your computer?

  Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >