Search Results

Search found 11178 results on 448 pages for 'syntax checking'.

Page 337/448 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• VM load and ping problems after replacing server motherboard

  - by Andre

  Recently, we had to replace the motherboard of one of our servers. The procedure was done by IBM as it had guarantee. The server runs ESXi 5.1, with several virtual machines, including our main mail server (Domino) and a file server. After the replacing the motherboard and staring the VMs, ESXi asked us if we had moved it or copied (different motherboard is like a different computer). We clicked the latter. We started each machine and after some basic reconfiguration, all of them were up. However, we have been having problems with the mail server, it has been acting really slow at times (this could be when it syncs with the secondary mail server) and we have been checking with Centreon (a Nagios frontend) that its CPU load has been a bit high at times and ping response too. There was a moment this morning in which I tried connecting via SSH console and it was really slow to show login and basic commands like ifconfig and top. This particular mail server is a CentOS 4.4.7 64-bit. The little configuring we had to do after restarting it was to configure the network connection as it was resolving through DHCP. Our mail software is Lotus Notes server 9. Do you know of any way in which this replacement may be causing these difficulties, and how to fix it? Thanks.

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• Why does Google Analytics use two domains?

  - by AKeller

  I'm building a distributed widget that is comparable to Google Analytics. Users will add a <script> tag to their site that references my widget's JavaScript file. The Google Analytics tracking code looks like this: var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-XXXXXXXX-X']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); Can anyone explain the reasoning behind separate HTTP and HTTPS hostnames? My instinct is to just secure the www address and then use the protocol-less syntax, like //www.google-analytics.com/ga.js. But I'm sure the Google Analytics architects put a lot of thought into this approach. I'd love to understand their logic before I follow/ignore their model.

  Read the article

• Something like Dropbox for local use

  - by Casper

  I am looking for a solution to sync folder pairs between a NAS and multiple local macs. Each of the macs could edit files and the other macs should then get synced automatically. Basically my own local version of Dropbox without using "cloud-storage". I have looked into solutions using rsync. As I understand it rsync is not really capable of doing a bi-directional sync. I also do not want to necessarily invoke the sync process. I would prefer a daemon running in the background - waiting and checking for changes and then syncing them "live". The program should also be flexible enough to recognize that it sometimes (in the case with laptops) can not reach the NAS. It should then just wait for the connection to be back again, without bugging me ever few minutes. I have looked into synk, folderwatch, rsync and a few others, but I haven't really found a solution. Isn't there something like "offline folders" from microsoft for the mac? Thanks PS: just for clarification - I don't want to sync for backup purposes, instead I am wanting to sync so that all macs have a local copy of the most recent changes to files.

  Read the article

• Vagrant VM Fails to Boot

  - by Rob Wilkerson

  I have a Vagrant environment that requires me to forward port 80 so I bring it up under sudo on an OS X machine. This has always been fine until I recently upgraded to Vagrant 1.2.2. Now it fails to boot. [default] Waiting for VM to boot. This can take a few minutes. [default] Failed to connect to VM! Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. Because I'm running under sudo, the machine never gets added to the Virtualbox GUI, but that's always been the case for this environment. I don't get any indication that there was a problem with the additions -- a potential source of this error, from what I've read. I can bring things up just fine if I change to using port 8080 on the host machine. I can't use the app, but the VM itself loads up and provisions nicely. As far as I can tell, the only thing that's changed is: I upgraded my Vagrant version I updated the project's Vagrantfile to use v2 syntax. Anyone have any idea what I might be missing? I thought I'd be able to find this pretty easily, but it's quickly becoming a very real problem.

  Read the article

• How to configure apache to basic authentication or allow when ntlm while proxying?

  - by trotzim

  Here is my study case: browser --- apache proxy --- ISA server --- internet The ISA server requires an authentication. The issue is to allow HTTPS through the two proxies. A configuration that works with HTTP is something like this: (yes, I don't want to use ProxyPass but ProxyRequests) <virtualhost *:8080> ... SetEnv auth-proxy-chain on ... ProxyRequests On ProxyRemote * http://isaproxy:80 ... <proxy *> AuthName "ISA server auth" AuthType Basic [here a module to authenticate] require valid-user Allow from all </proxy> ... </virtualhost> The user can authenticate on the apache proxy then the authentication chain is sent to the ISA server that allows the HTTP trafic. But, while the browser switchs to HTTPS, the ISA server "speaks" NTLM and breaks the authentication on the apache proxy. If I try to use the SSPI module (ntlm) with something like this: blablabla <proxy *> AuthName "ISA server auth" AuthType ntlm [ SSPI stuff ] Require valid-user Allow from all </proxy> The apache server reject the authentication (or the ISA server I don't really know). I use wireshark to look at the nominal process while using directly the ISA server as proxy. The first auth-chain is a BASIC type then it switchs to NTLM (and the challenge continues with NTLM). How should I configure apache that it transfers the NTLM authentication to the ISA proxy without checking it(*)? Or to rewrite headers to force BASIC authentication? (*) It seems not to be as easy as it seems...

  Read the article

• Windows Server wbadmin recover with commas

  - by dlp

  I want to do a recovery of files with commas in their names from the command line, ala: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File, With Comma.txt,C:\Path\To\File 2, With Comma.txt" So there are two files: C:\Path\To\File, With Comma.txt C:\Path\To\File 2, With Comma.txt The problem is wbadmin assumes commas separates each file, so it sees 4 files specified instead of 2. I've tried putting a \ in front of commas that are part of the file names like so: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File\, With Comma.txt,C:\Path\To\File 2\, With Comma.txt" but it doesn't work, it just says there's a syntax error. The documentation on Technet doesn't seem to mention anything that'll help either. OS is Windows Server 2008 R2. A clarifying comment: I've changed the file names to be different than the actual names to be less revealing, but I also see I dumbed it down too much. The comma can occur either in the file name itself like C:\Path\To\File, With Comma.txt' or in the path to the file, like:C:\Path, To\Other\File.txt`.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• User unable to delete folder / files "File in use by another user" Server 2003

  - by Az

  I am administering a standalone Windows 2003 Terminal Server with no domain membership. Occasionally (about once a week or so) a user will attempt to delete a sub-folder in a Shared folder and gets denied with "File in use by another user". I tried checking the shared folder snap-in and that folder is not open. She has full control and is the owner of the folder as well. I even checked in "Effective permissions" for some of the folders / files she cant delete and she truly has full control. I am able to delete the folder as Administrator with no problem. Another odd thing, she can delete the files IN the folder most of the time (this issue happens on both folders and files in the share). Sometimes merely waiting a day or two will allow her to delete the folder or files. I am curious as to why she gets the message that it is in use as creator/owner with full control yet I don't get it simply as a member of the Admin group. If anyone out there has any ideas I'd love to hear them! THANK YOU.

  Read the article

• Problems creating a functioning table

  - by Hoser

  This is a pretty simple SQL query I would assume, but I'm having problems getting it to work. if (object_id('#InfoTable')is not null) Begin Drop Table #InfoTable End create table #InfoTable (NameOfObject varchar(50), NameOfCounter varchar(50), SampledValue float(30), DayStamp datetime) insert into #InfoTable(NameOfObject, NameOfCounter, SampledValue, DayStamp) select vPerformanceRule.ObjectName AS NameOfObject, vPerformanceRule.CounterName AS NameOfCounter, Perf.vPerfRaw.SampleValue AS SampledValue, Perf.vPerfHourly.DateTime AS DayStamp from vPerformanceRule, vPerformanceRuleInstance, Perf.vPerfHourly, Perf.vPerfRaw where (ObjectName like 'Logical Disk' and CounterName like '% Free Space' AND SampleValue > 95 AND SampleValue < 100) order by DayStamp desc select NameOfObject, NameOfCounter, SampledValue, DayStamp from #InfoTable Drop Table #InfoTable I've tried various other forms of syntax, but no matter what I do, I get these error messages. Msg 207, Level 16, State 1, Line 10 Invalid column name 'NameOfObject'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'NameOfCounter'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'SampledValue'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'DayStamp'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'NameOfObject'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'NameOfCounter'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'SampledValue'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'DayStamp'. Line 10 is the first 'insert into' line, and line 22 is the second select line. Any ideas?

  Read the article

• Noisily rendered text in Firefox

  - by Notinlist

  It came to me in a week or so that certain pages (Facebook, StrackOverflow, some news sites) have text rendering errors in Firefox. As a workaround if I refresh the page, or simply select and deselect the buggy text, the unpleasant effect disappears. I don't have this effect in Internet Explorer or in any of my desktop applications. Windows 7 Pro 64bit (fresh) Firefox 19.0.2 (fresh) Ati Radeon HD 4600 Series (fresh drivers) Thanks for the help in advance! Update 1/2 I have only three addons: Forecastfox, Hungarian spell checking dictionary and Quick locale switcher. The latter two are installed after the effect appeared. I disabled the first individually and did not helped. But if I start my firefox with disabled addons I cannot reproduce the error. As far as I know this mode does not mean disabled plugins, which I do have (Adobe Acrobat, Citrix ICA Client, Google Earth plugin, Google update, Java Deployment Toolkit 6, MS Office 2010, MS Windows Media Player Firefox, Shockwave Flash, Silverlight, VLC Web). Update 2/2 If I disable all plugins and extensions I still have the problem. If I start Firefox with disabled addons then I cannot reproduce the problem.

  Read the article

• Uploading to another domain gives HTTP code 405

  - by dragon112

  I'm trying to upload a file (which can be quite large) from the website of one server to the backend of another server using plupload. Lets say: domain 1 = http://www.websitedomain.com/uploadform domain 2 = http://www.backenddomain.com/uploadhandler Trying to upload i send the following: OPTIONS /main/uploadnetwork.php HTTP/1.1 Host: backenddomain.com Connection: keep-alive Access-Control-Request-Method: POST Origin: http://www.websitedomain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Access-Control-Request-Headers: origin, content-type Accept: */* Referer: http://www.websitedomain.com/uploadform Accept-Encoding: gzip,deflate,sdch Accept-Language: nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 DNT: 1 But when I try to start the upload the server returns the following: HTTP/1.1 405 Method Not Allowed Allow: GET, HEAD, OPTIONS, TRACE Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET X-Powered-By-Plesk: PleskWin Date: Mon, 01 Oct 2012 12:41:57 GMT Content-Length: 999 After doing some research I found out that a browser does this to check if the server will accept the intended message. It looks like my server doesn't feel like accepting a simple POST call even tho i use post all the time. The Google Chrome console gives the following error: XMLHttpRequest cannot load http://www.backenddomain.com/uploadhandler. Origin http://www.websitedomain.com is not allowed by Access-Control-Allow-Origin. Does anyone know how to stop the browser from checking or how i can tell my server to just accept the POST?

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• XAMPP server giving 404 error when requested by ipv4 connection

  - by boyb

  This is in reference to a previous question that I asked and was answered by womble. http://serverfault.com/a/406280/127729 So, now we have the real DNS records, we can do some diagnosis. dig for both A and AAAA on akosiboybastos.broker.freenet6.net gives a valid response, with an appropriate address. Good. dig for both A and AAAA on bastosforum.strangled.net gives the same responses (with a CNAME response thrown in). Also good. This means that the problem is not DNS-related, as those records are in order. wget -6 bastosforum.strangled.net/ gives a 200 OK response. wget -4 bastosforum.strangled.net/ gives a 404 Not Found response. This means that your webserver is misconfigured so that it's not serving the response you desire on IPv4. Given that the initial DNS problem asked in this question has been solved, I would recommend posting a new question with relevant webserver-related configuration, if you can't determine the configuration error yourself. I am using XAMPP(latest version) running phpbb3.0.10 via ipv6 tunnel from freenet6 and my domain is akosiboybastos.broker.freenet6.com, nothing fancy with the installation just out of the box install(with a few cosmetic mod). Both ipv4 and ipv6 traffic can connect using that url, but when I try to put a CNAME record on my test domain which is bastosforum.strangled.net pointing it to akosiboybastos.broker.freenet6.com only ipv6 can connect. As suggested by womble, this is a misconfigured webserver. To be honest I don't know where to start checking on the server as it is fully working if you use the domain given by freenet6 (akosiboybastos.broker.freenet6.com), any info on how to go about this server issue is welcome as i'm really a noob when it comes to computers. regards boyb

  Read the article

• Windows 7 automatically logs out when logging in

  - by Luke

  A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

  Read the article

• Viewing local websites on my iOS device over Wi-fi

  - by John

  Trying to view some local html/css/js files in a mobile browser on my iOS device. Thought maybe file-sharing would be an option, and is, but I'm not completely satisfied with it. Any time I try to do the following an error occurs. Web sharing is on and available at http://192.168.1.101/~user but I have to manually copy the files in. If I try to symlink a folder in so that the address could be viewed at ''~user/some_dir by issuing $ ln -s /Users/user/dev/some_dir ~/Sites/ then I get a 403 forbidden error. I've tried to remedy this by modifying a user.conf file in /private/etc/apache2/ and using the following syntax: <Directory "/Users/user/Sites/"> Options Indexes MultiViews SymLinks AllowOverride None Order allow,deny Allow from all </Directory> but nope, still doesn't work. I get a 403 error. If I try to symlink each individual file in instead of using a directory as a sub-directory, same error. Any help would be greatly appreciated! I'd just like to symlink directories into the ~/Sites one and browse them on my iOS device over wifi. I'm on OS X 10.7 Lion trying to connect with iOS 5.

  Read the article

• Thunderbird 15.0.1 cannot use Exchange 2003 SMTP

  - by speedreeder

  I'm having the strangest time getting a Thunderbird email client to connect to my Exchange 2003 server. I got the incoming IMAP account set up no problem, and I can receive mail. However sending mail will not work no matter what SMTP settings I enter. After checking the server, the proper settings should be port 25 with no authentication or connection security, which I have entered. I can ping the hostname of the server from the client machine in question. The Thunderbird error message I get is: "Sending of message failed. The message could not be sent because the connection to SMTP server -hostname omitted- was lost in the middle of the transaction." So I went to the server and double checked the settings for Exchange's SMTP stuff. I have it correct. I tried to telnet (on the server) to localhost 25. It appears to connect and then disconnect immediately, no message, no nothing. When I telnet to other ports (POP-110 for example) I get proper connection messages and a stable connection. There are no firewalls on either the client or the server. There's a firewall on the network but LAN-LAN traffic is unrestricted. I can reproduce the Thunderbird error on a second client, and I can't get any client to be able to telnet in. Anyone have any ideas?

  Read the article

• Hardware testing tool/suite

  - by Aviator

  Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• How to Access User Directory shared by Apache on OS X Mountain Lion?

  - by schluchc

  When trying to access the local user web page on localhost/~username, I get a "403 Forbidden". The system web page in /Library/WebServer/Documents is accessible on localhost/ though, so I assume Apache is working fine. I know that this problem has been discussed several times, also on superuser. I implemented and checked all I could find, but I still couldn't solve the problem and would be glad if someone had a suggestion for this particular case: sudo apachectl -t returns Syntax OK. I have a username.conf file in /etc/apache2/users/: <Directory "/Users/username/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> as proposed here [SuperUser] and in several other tutorials. The permissions of the username.conf file are -rw-r--r-- root wheel, as they should be. The httpd.conf is unchanged and therefore contains the line Include /private/etc/apache2/extra/httpd-userdir.conf. That file in turn contains UserDir Sites Include /private/etc/apache2/users/*.conf <IfModule bonjour_module> RegisterUserSite customized-users </IfModule> So the httpd*.conf files should be ok. The permissions of /Users/username/Sites is drwxr-xr-x 10 username staff and -rw-r--r--@ 1 username staff for the index.html. In the error log I simply get a [Sun Nov 25 22:14:32 2012] [error] [client 127.0.0.1] (13)Permission denied: access to /~username/ denied. And yes, after each change I did the sudo apachectl restart. Any help no how to solve the problem or how to further analyze it would be highly appreciated!

  Read the article

• How to make Microsoft JVM work on Windows 7?

  - by rics

  I am struggling with the following problem. I cannot install MS JVM 3810 properly on Windows 7. When I start Interner Explorer 8 without starting any java 1.1 programs choosing Java custom settings under Internet options causes the crash of the browser. I have some Java 1.1 programs that work well in Internet Explorer 8 on Windows XP after the installation of MS JVM 3810. I know that it is not advised to use this old JVM but it is not a short-term option to port the programs in newer Java since it contains 3rd party components. Complete rewrite is a long-term plan. Strangely jview and appletviewer (jview /a) works from a console so the MS JVM 3810 is not completely busted just IE 8 does not like it. The problem with the appletviewer is that it cannot connect to the server even if both signed and unsigned content in Java custom settings have been set to Enable all. (Since Java custom settings was unreachable due to the crash the modifications - including My computer - were performed through the registry and pre-checked to behave correctly on Windows XP and Internet Explorer 8.) If jview was working then I could at least think of a workaround. Is there a way to configure MS JVM or jview properly on Windows 7? Another options would be: Checking Internet Explorer 9 Beta. Using virtualbox and Windows XP older IE in it. Delaying Windows 7 upgrade. ... Update Finally we have modified all the programs to work parallelly as applet and application as well. This way the programs can still be used from browser on older Windows versions. On Windows 7 the applications are started from the desktop. Installation to all user machine can easily be solved since they already have a large common application drive. The code update is fortunately only a few lines of modification: including a main method in the applet class. Furthermore instead of the starting html page a bat file is used to set the classpath before the startup with jview.

  Read the article

• How to access Virtual machine using powershell script

  - by Sheetal

  I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >