Search Results

Search found 13501 results on 541 pages for 'dimensional model'.

Page 338/541 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Generic socket 940 CPU fan interchangeable with HP part number 411454-001

  - by ConcernedOfTunbridgeWells

  Hi, I'm trying to find a generic CPU fan that will fit the air duct in an XW9300. Note that there are two CPU fan mounting schemes used on this machine. One with two grommets in the motherboard that the CPU fan screws into and one with a plastic collar and base plate. The form factor I'm looking for is the former (see picture below): Two HP part numbers for fans in this form factor are 411454-001 (shown below) and 416055-001. Note that the dimensions are important as the machine has an air duct that fits over the fan. Can anyone tell me the manufacturer and model of an equivalent generic part? Better yet, do you know somewhere (preferrably in the UK) that I can obtain such an item from?

  Read the article

• Where can I find drivers for Fujitsu Scansnap fi-5110 for Windows 7 x64

  - by Tone

  I have a Fujitsu scanner that I cannot get working on Windows 7 x64. I have downloaded both the TWAIN and ISIS x64 drivers from the fujitsu website but Windows still does not recognize. I have tried it out using GIMP and Paint.net, neither program sees the scanner. I have also tried the fi-5000N Configuration Tool from Fujitsu but to no avail. Anyone know what drivers i need to install? Here's the info on the back of the scanner: Model: Fi-5110E0X2 Part No: PA03360-B015 Serial No: 026132 Date: 2005-09

  Read the article

• Non-Apple RAID card for Mac PRO (TOWER)

  - by Arthor

  I have the following: MAC PRO (Model Number: A1186) (PCIe - SLOTS) At present I am using the software RAID however I wish to move to the hardware raid because of the following: Performance (4 x 300gb SATA II in RAID 5) Redundancy (Raid 5, 1 drive can fail and system will be online) I do not wish to use the Apple RAID card (very expensive), I would like to use an aftermarket one which is cheaper. Questions: Does anyone have a WORKING aftermarket RAID card working in their MAC PRO (TOWER)? -(Have done some research, ROCKETRAID, need confirmation) If so to the above, does it work from boot? Thanks

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• Ghost Image - windows asks for activation on when deployed to VM

  - by Chris Sobolewski

  I have several images created with Ghost Solution Suite (v11 I believe), the images have been in use for a few years now, but I am finally to the point where I have enough time to attempt to virtualize them for easier updates. I am running VMWare and attempting to image the virtual machines with my ghost image files. For my images I am running sysprep with minisetup and using reseal. The image deploys successfully, however when I start the VM for the first time, it demands windows activation. This doesn't happen when I image a physical computer, even a different model with different hardware. The idea of virtualizing my images becomes rather worthless if I am unable to deploy the images without having to activate every time (especially as Microsoft keeps declaring our volume licence key as invalid for activations). Does anyone know why it is asking for activation on a virtual machine, but not a physical PC? How can I prevent this?

  Read the article

• Recompile PHP *nix

  - by Dorjan

  Hello everyone, I'm a total newb to *nix in all forms so assume I know nothing about it. I've been trying to use a php function set called "ZipArchive". It says I need to recompile php with the --enable-zip option. Now "recompile php" scares me. Does that re-install it!? Does it clear all previous settings so if I do this then any settings done prior will be wiped? Or is there a way to add on this one option? Seems a bit much for a re-installation to add a model when on a windows server it is just add a line to the .ini file :\ Many thanks to anyone who can clear up this matter for me :)

  Read the article

• Macbook Pro Multiple Monitor Problem

  - by thinksocrates

  I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

  Read the article

• Matte or non-widescreen laptop? Do they exist?

  - by Alan Harris-Reid

  Does anyone know of any matte-screen laptops being sold now (15.6 or 17") in the UK? All I can find is the Dell Vostro 3500/3700 range, but there is a premium of around £200 over the price of their Inspiron range (for the 17" model), and I find it hard justifying the extra cost just to have a matte screen. I do not like glossy screens, but it seems the laptop industry has gone the way of "glossy is better - let's get rid of matte". I have read and heard from other developers that as long as there are no strong light sources to reflect off the screen, one can soon get used to a glossy screen, but I am yet to be convinced. I would also be interested if anyone knows of any non 16:9 screen laptops. I find this ratio too wide and not high-enough for the work I do. 16:10 or lower would be better. Any opinions would be appreciated. Alan

  Read the article

• Ubuntu - connecting 3rd monitor fails with "xrandr: cannot find crtc for output DVI-0"

  - by MDCore

  I've got a laptop with a DVI and VGA output on the back. With everything connected it will only allow me to run 2 of the 3 monitors e.g. laptop display + VGA or DVI+VGA but not all 3. xrandr says I have 2 CRTC's, 0 and 1. The internet says I should be able to share a CRTC if the modeline is the same, and my 2 external monitors are the exact same make and model. How do I convince the software to drive all this hardware?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Can't access USB drive anymore

  - by marie

  I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

  Read the article

• Force an LXC container to use its own IP address

  - by emma sculateur

  Sorry if this question has already been asked. I could not find it, I have this setup : +---------------------------------------------------------------------------------------------+ |HOST | | | | +-------------------------------------------------+ | | | UBUNTU-VM | | | | | | | | +-------------------+ | | | | |UBUNTU-LXC | | +------------------+ | | | | 10.0.0.3/24 | 10.0.0.1/24 | |OTHER VM | | | | | eth0-----lxcbr0----------eth0-----------br0----------eth0 | | | | | | 192.168.100.2/24| 192.168.100.1/24 |192.168.100.3/24 | | | | +-------------------+ | +------------------+ | | +-------------------------------------------------+ | +---------------------------------------------------------------------------------------------+ When I ping 192.168.100.3 from my UBUNTU-LXC, the source IP address is automatically changed to 192.168.100.2 by UBUNTU-VM. It's like having a NAT, whereas I really want my UBUNTU-LXC to talk with it own IP address. Is there any way to do this ? Edit : these info may be relevant : I am using KVM +libvirt to set up my VMs Here is how I create my interface in UBUNTU-VM : <interface type='bridge'> <mac address='52:54:00:cb:aa:74'/> <source bridge='br0'/> <model type='e1000'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </interface>

  Read the article

• Visio 2010 Reverse Engineer Oracle

  - by digitall

  I have used Visio 2007 in the past to reverse engineer Oracle databases to get a flow scheme. I believe all Office 2007 products were x86 as well which is where I suspect my issue currently lies. I have since upgraded to Visio 2010 x64 and when I go to reverse engineer something from Oracle it shows up under Installed Visio Drivers but I can't seem to create a data source using it. My assumption here is it is because Oracle doesn't play nicely with x64 and with Visio being compiled as x64 I don't even get the option to use it. Has anyone done this with Visio 2010 x64 and Oracle yet? Or are there other tools you would recommend to reverse engineer and get a model such as the one generated by Visio?

  Read the article

• Jenkins shows same information for all projects

  - by SuperCabbage

  I've been using Jenkins for the last month or so and what started out as a small issue has gotten worse and worse. I have 10 projects in Jenkins, all polling from different Git repos and building to different environments but they all show the same details on the dashboard. I can still build the projects, but I have to manually enter the URL to see any console output etc. I'm running 1.536 under Ubuntu 12.04, there's not much in the logs other than the following; Oct 22, 2013 2:21:19 PM WARNING jenkins.model.lazy.AbstractLazyLoadRunMap search JENKINS-15652 Assertion error #1: failing to load /data/builds #20 EXACT: lo=23,hi=9,size=23,size2=23 – Any ideas?

  Read the article

• Gateway MX6440 CPU Upgrade

  - by BPugh

  I have received an a Gateway MX6440 laptop as a freebie, but I'm interested in upgrading its AMD Turion 64 ML-32 (socket 754) to something faster (and more cache). I know the range of processors that could work based on the family list in Wikipedia. However, this computer has the stock bios, and any updates I haven't applied from Gateway doesn't specify processor support. I'm looking to go to at least a 2.2 (ML-40). Has anybody upgraded the processor in this model or other in the series success or failure and do you happen to have any guides handy for working with the heat sink? Any Googling I have done keeps hitting RAM marketers. Update Computer died before I had a chance to try this out.

  Read the article

• Gateway NE56R & mouse swipe gesture...how to disable?

  - by Anders

  Can anyone tell me how to shut off the swipe gesture mechanism on my computer? It's driving me crazy. I cannot use a single application without having my computer screen minimize every time I move my hand over the mouse following a mouse-click, pointer movement, etc. Having to maximize my spreadsheets, documents, and applications so much is undercutting my productivity. How some software engineer/inventor imagined that this mouse/gesture swipe gimmick would be helpful to computer users is inconceivable to me. It is a massive annoyance. I've found instructions online for disabling this obnoxious feature, but all the instructions involve messing with my registry, which I don't want to do. I will be SO GRATEFUL to any techie who can tell me how to disable this horrible mouse swipe mechanism without having to alter my registry! I'm using a Gateway NE56R Notebook, Windows 7 operating system, and an Inland USB Mouse (model no. 37535). Thank you in advance!

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

  - by David Murdoch

  I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

  Read the article

• Cisco login on-failure using syslog doesn't show username on failure?

  - by Jim

  interesting issue I am running into. I am trying to get syslog rmeote logging working with a Cisco switch. i have it working and logging for both on-success and on-failure. However when it is a failed login attempt it does not show the user name that tried to log in in the logs? Here is what the log looks like after a failed login: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: ] [Source: 10.0. 0.6] [localport: 23] [Reason: Login Authentication Failed] Here is what I ahve in the sh run: login block-for 60 attempts 3 within 60 login delay 1 login on-failure log login on-success log archive log config logging enable notify syslog contenttype plaintext logging trap notifications logging facility local4 logging 10.0.0.8 aaa new-model aaa authentication login default local group tacacs+ aaa authorization config-commands aaa authorization exec default local group tacacs+

  Read the article

• Visio Losing My Diagrams!

  - by bobber205

  I've created under "Static Model-Top Package" 4 different sequence diagrams. Once I tried creating the fifth it won't keep it. I try to double click and open it and it opens the 4th one. I can delete the 5th one and create a new one. I can edit this but as soon as I go to another diagram, I've lost it and can only go back to the 4th one and edit that even though I right clicked the 5th one and selected "Open Sequence". What is going on? Has anyone else seen this Visio issue?

  Read the article

• Will Dolphin emulator run (smoothly) on this machine?

  - by Mark

  Product Specs: Intel® NM10 Express chipset /w Intel® Atom® D525 (dual-core, 1.8 GHz) I think the most I can put in there for RAM is 4 GB. (They don't make 8 GB SODIMM do they?) The Dolphin site is pretty vague about requirements: Windows XP or higher, or Linux, or MacOSX Intel Fast CPU with SSE2. GPU with Pixel Shader 2.0 or greater. Some integrated graphics chips work but it depends on the model (and only with DirectX 9). I'm trying to make a light-weight quiet little machine for streaming video and playing eumulators, and I'm trying to figure out the minimum requirements I will need to do what I want. I know I'm not supposed to ask for product recommendations here, so if you could just advise the minimum requirements in terms of CPU, graphics card, and RAM, that'd be helpful.

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >