Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 338/460 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

  • Can't install Ubuntu on Asus Eee 1015pem

    - by Peter
    I'm having trouble to install Ubuntu. I use a ASUS Eee 1015pem netbook. Recently, I my netbook got wet. I had it inside my backback and all my things got wet. The netbook boots up fine but it will not load the OS. I downloaded ubuntu onto my external hard drive and changed the settings in my Bios to boot from a removable device. Nothing happens. When I plug in my external hard drive I'm not able to get to the boot icon. I have to unplug it the external hard drive. Set my boot settings I tried both Removable and CD-Rom. Than I plug my external drive back in and nothing happens on either settings. My Asus never came with a recovery disk and suppose to have a build in recovery by pressing F9 in the Bios. Also I need to disable Boot Booster in Bios and Boot Booster is not even an opition in Bios. My friend told me try installing Ubuntu but now I'm having no luck with Ubuntu. Any suggestions?

    Read the article

  • Reasonable technological solutions to create CRM using .NET eventually Java

    - by user1825608
    My background(If it's too long, just skip it please ; ) ): I am Java programmer(because of demand): mostly teacher for other students, worked on few thesis for others, but during my journey I discovered that .NET and Microsoft's tools are on at least two levels higher than Java and its tools so I want to learn more about them. I programmed little bit on Windows Phone(NFC Tags, TCP Clients, guitar tuner using internal microphone, simple RSS), used WPF, integrated WPF with Windows Forms, Apple Bonjour(.NET), I have expierience with IP cameras and with unusal problems, I learn Android, but I don't like it at all. Problem: I was asked by my friend to create CRM for small new company. There will maximum 20 workers in the company working at computers in few cities in the country(Poland). They just want to store contracts with the clients and client's data. I am not sure what exacly they do but probably sell apartments so there will be at most few thousands of contracts to store in far future. Now I am totally new to CRM but I want to learn. I have few questions: Should the data be stored on a server in the company's building running 24/7 or cloud. If cloud which one? Should I use ASPX or WPF. I read one topic about it but as far as I know aspx sites can be viewed from every device with internet browser: tablets, phones(Android, WP, iOS) and computers at the same time- so the job is done once and for all(Am I right?), I don't know nothing about aspx. Can WPF be also used in manner that does not need to port it for other platforms?

    Read the article

  • How do I get a Laserjet M1212nf MFP working?

    - by Leandro
    I am trying to install a multifunctional printer Laserjet M1212nf MFP on Ubuntu 12.04. I downloaded and install the hplip indicated by the official web site. At the end of the installation I chose reboot the whole system and next I call hp-setup in the terminal (as normal user and then as root). After select in the dialog box my printer I got the following error: Searching... (bus=usb, search=(None), desc=0)<br> /Traceback (most recent call last):<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1255, in NextButton_clicked<br> self.showAddPrinterPage()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 690, in showAddPrinterPage<br> self.readwriteFaxInformation()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1079, in readwriteFaxInformation<br> self.fax_name_company = unicode(d.getStationName())<br> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 20: ordinal not in range(128) I think at this stage the plugin should be downloaded, but it is not working. Any suggestion on how to solve this problem ? Edition: After running hp-toolbox I got the following error message : Unable to communicate with device (code=12): hp:/usb /HP_LaserJet_Professional_M1212nf_MFP?serial=000000000ST10HPQSI1c

    Read the article

  • Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

    - by Justin Kelly
    I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • Difficulty / Process for mobile 2D multiplayer RPG game

    - by user2827214
    I'm looking to develop a 2D multiplayer RPG game for Android, with a bird's eye view similar to that of zelda/pokemon. The game is very simple in all ways since my intent is for thousands of players to occupy the same world which I imagine requires good performance. However, I am unsure about the performance requirements of two properties: the tile map that is used as a background is dynamic (interactive). For example, a player steps in the water, and the water turns black. Every tile in the game does this. the tile map is the same object used for all players, but it is displayed differently on each user's mobile device, even though the players exist in the same world. For example, the water that turned black is displayed as red on all other players' screens. I have knowledge of java, but almost none regarding game dev. tools. Is there a best process for these requirements? Should I develop in pure java, or use some tool like Slick2D etc.? How performance intensive are these properties, if even possible? Edit: There are no collisions in the game or difficult animations, I imagining simply changing colors of the tiles like in the examples, and a client-server architecture

    Read the article

  • What methods should save/load a game state

    - by vedi
    There are a lot of articles about how to save a state of a game and they are pretty good. But I have one conceptual misunderstanding where should I save the state? My game has number of screens and pair of them are MainMenuScreen and MainSceneScreen these are inherited from Screen class. MainMenuScreen is shown at start of the game the MainSceneScreen little later. What is the problem? I navigated to MainSceneScreen, forced Android to stop the application (I change a language settings on the device to achieve it, please let me know if I'm wrong). After that I select the application again and I can see MainMenuScreen is shown. But I want MainSceneScreen to be shown. I suppose I should override resume method. But what class I should override? I have class PsGame that extends Game class of libgdx. I put breakpoints to its resume method and it turned out that method was not called. I investigated the problem and I've found little strange code in onResume method of AndroidApplication class of libgdx: if (!firstResume) graphics.resume(); else firstResume = false; My debugger said firstResume was true and didn't go to *graphics.resume()*line. Sorry for a lot of words but could you answer following question: What did I do wrong? What methods should I override? Thank you in advance.

    Read the article

  • Updating games for iOS 6 and new iPhone/iPod Touch

    - by SundayMonday
    Say I have a game that runs full-screen on iPhone 4S and older devices. The balance of the game is just right for the 480 x 320 screen and associated aspect ratio. Now I want to update my game to run full-screen on the new iPhone/iPod Touch where the aspect ratio of the screen is different. It seems like this can be challenging for some games in terms of maintaining the "balance". For example if the extra screen space was just tacked onto the right side of Jet Pack Joyride the balance would be thrown off since the user now has more time to see and react to obstacles. Also it could be challenging in terms of code maintenance. Perhaps Jet Pack Joyride would slightly increase the speed of approaching obstacles when the game is played on newer devices. However this quickly becomes messy when extra conditional statements are added all over the code. One solution is to have some parameters that are set in once place at start-up depending on the device type. What are some strategies for updating iOS games to run on the new iPhone and iPod Touch?

    Read the article

  • Blogging from Office RT

    - by Dennis Vroegop
    During the last Build conference all attendees were given a brand new sparkling exciting Surface RT device (I love that machine despite its name but that's beside the point). On it came a version of Office 2013 RT, or better: the preview version. Now, I translated that term "Preview" to "Beta". Which is OK, since I've been using a lot of beta products from Microsoft and they all were great. And then I wanted to post a blogposting from Word. I knew I could, I have been doing this for a long time (I prefer Live Writer but that isn't available on Windows 8 RT). So I wrote the entry and hit "Publish". Instead of my blogsite I got a nice non-descriptive error telling me I couldn't post. So I fired up my other (Intel based) Win8 tablet, opened Word RT Preview, it loaded my blogpost (you've got to love the automatic synchronization through Skydrive) and tried from that machine. Same error. So, I installed Live Writer (remember, the other machine is Intel based) and posted from there. That worked like a charm. Apparently, there was something wrong with Word. I gave up and didn't think about it anymore. Yet… what you're reading now is written in Word 2013 RT on my Surface RT. So what did do? Simple: I updated from the Preview version to the final version. That's all there was to it. So…. If you're still on the preview I urge you to upgrade. You need to go to the "classic desktop update" window instead of going through the Windows Store App style update since Office is a desktop system, but once you do that you'll have the full version as well. Happy blogging!

    Read the article

  • Lost files after installing Ubuntu

    - by Joshua Rosato
    I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

    Read the article

  • Design pattern for an automated mechanical test bench

    - by JJS
    Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

    Read the article

  • Antenna Aligner part 2: Finding the right direction

    - by Chris George
    Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

    Read the article

  • Raspberry Pi and Java SE: A Platform for the Masses

    - by Jim Connors
    One of the more exciting developments in the embedded systems world has been the announcement and availability of the Raspberry Pi, a very capable computer that is no bigger than a credit card.  At $35 US, initial demand for the device was so significant, that very long back orders quickly ensued. After months of patiently waiting, mine finally arrived.  Those initial growing pains appear to have been fixed, so availability now should be much more reasonable. At a very high level, here are some of the important specs: Broadcom BCM2835 System on a chip (SoC) ARM1176JZFS, with floating point, running at 700MHz Videocore 4 GPU capable of BluRay quality playback 256Mb RAM 2 USB ports and Ethernet Boots from SD card Linux distributions (e.g. Debian) available So what's taking place taking place with respect to the Java platform and Raspberry Pi? A Java SE Embedded binary suitable for the Raspberry Pi is available for download (Arm v6/7) here.  Note, this is based on the armel architecture, a variety of Arm designed to support floating point through a compatibility library that operates on more platforms, but can hamper performance.  In order to use this Java SE binary, select the available Debian distribution for your Raspberry Pi. The more recent Raspbian distribution is based on the armhf (hard float) architecture, which provides for more efficient hardware-based floating point operations.  However armhf is not binary compatible with armel.  As of the writing of this blog, Java SE Embedded binaries are not yet publicly available for the armhf-based Raspbian distro, but as mentioned in Henrik Stahl's blog, an armhf release is in the works. As demonstrated at the just-completed JavaOne 2012 San Francisco event, the graphics processing unit inside the Raspberry Pi is very capable indeed, and makes for an excellent candidate for JavaFX.  As such, plans also call for a Pi-optimized version of JavaFX in a future release too. A thriving community around the Raspberry Pi has developed at light speed, and as evidenced by the packed attendance at Pi-specific sessions at Java One 2012, the interest in Java for this platform is following suit. So stay tuned for more developments...

    Read the article

  • Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using LiveCD

    - by unknownthreat
    I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

    Read the article

  • WiFi is not detecting in compaq presario c700

    - by charan
    Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

    Read the article

  • What I saw at TechEd North America 2014

    - by Brian Schroer
    Originally posted on: http://geekswithblogs.net/brians/archive/2014/05/19/teched-north-america-2014.aspxI was thrilled to be able to attend TechEd North America 2014 in Houston last week. I got to go to Orlando in 2008, and since then I’ve had to settle for watching the sessions online (which ain’t bad – They’re all available on Channel 9 for streaming or downloading. Here are links to the Developer Track sessions and to the sessions from all tracks.) The sessions I attended (with my favorites bolded) were: Shiny new stuff The Microsoft Application Platform for Developers: Create Applications That Span Devices and Services INTRODUCING: The Future of .NET on the Server DEEP DIVE: The Future of .NET on the Server ASP.NET: Building Web Application Using ASP.NET and Visual Studio The Next Generation of .NET for Building Applications The Future of Visual Basic and C# Stuff you can use now Building Rich Apps with AngularJS on ASP.NET Get the Most Out of Your Code Maps SignalR: Building Real-Time Applications with ASP.NET SignalR Performance Optimize Your ASP.NET Web App Modern Web and Visual Studio Visual Studio Power User: Tips and Tricks Debugging Tips and Tricks in Visual Studio 2013 In a world where the whole company uses TFS… Using Functional, Exploratory and Acceptance Testing to Release with Confidence A Practical View of Release Management for Visual Studio 2013 From Vanity to Value, Metrics That Matter: Improving Lean and Agile, Kanban, and Scrum Ain’t Nobody Got Time for That As usual, there were some time slots with nothing of interest and others with 5 things I wanted to see at the same time. Here are the sessions I’m still planning to watch… Getting Started with TypeScript Building a Large Scale JavaScript Application in TypeScript Modern Application Lifecycle Management Why a Hacker Can Own Your Web Servers in a Day! Async Best Practices for C# and Visual Basic Building Multi-Device Apps with the New Visual Studio Tooling for Apache Cordova Applying S.O.L.I.D. Principles in .NET/C# Native Mobile Application Development for iOS, Android, and Windows in C# and Visual Studio Using Xamarin Latest Innovations in Developing ASP.NET MVC Web Applications Zero to Hero: Untested to Tested with Microsoft Fakes Using Visual Studio Cool and Elegant ASP.NET Web Forms with HTML 5 for the Modern Web The Present and Future of .NET in a World of Devices and Services

    Read the article

  • Mouse wheel speed, a permanent solution?

    - by Logan
    I would like to address an issue that has been around for a while now. The wireless mouse's wheel speed is abnormally fast on Ubuntu (as well as Mac Osx, as I have read) and the way to fix this temporarily is to unplug and plug the wireless adapter. A solution for this have been asked for in various forum topics on Ubuntu forums and also askubuntu. However the best solution for this is to re-plug the wireless adapter for the mouse. This fixes the mouse wheel speed until the next reboot. My question is, what can be done to make this permanent? Can a shell script be written, or firstly what can be causing this? If you could give me some ideas on why this problem is occurring I would happily write a shell script for it... (I am thinking if this is fixed by a simple re-plug of the adapter, maybe a shell script to disable device and re-enable it or something like that... could do the trick) I appreciate any discussions and ideas on the subjects. Here are some already discussed topics on the same subject that I've researched: Mouse wheel jumpy on scrolling Mouse wheel scrolling too fast There's a lot more than that on the net, all of them ends with re-plug solution.

    Read the article

  • Nvidia 740M still not working after Bumblebee installation

    - by Jon
    first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

    Read the article

  • Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

    - by Liz
    Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

    Read the article

  • The Differences between MAC Address and Network Layer Address

    A Mac address is a fixed number associated with a NICs onboard memory. It is initially assigned at the factory. The MAC address is broken up into 2 parts. The first part is the Block id which is six digit sequences that is unique to each vender. The second section is the device id which is created and assigned by the manufacture. A Network layer address is different because there format based on the type of protocol and network used. Also, there unique id is based on a hierarchal addressing theme on subsets of data  and narrowing it down. Just like in an address you can narrow down your house, for example: Florida, Boca Raton, 33428, SW 53th street states that you live in Florida. You also live in the area located in Florida called Boca Raton and you are also in the area of 33428 which is located in Boca Raton. Finally you live on SW 8th street which is in the area of 33428 which is located in Boca Raton which is also located in Florida.

    Read the article

  • What packages are neccessary to have sound output from java applets?

    - by MvG
    I've got a very minimalistic setup of ubuntu precise, created using debootstrap. So please don't assume that any packages are installed just because they usually are. On that system, I'd like to play some sounds from a java applet. However, this always fails with the following error message: javax.sound.midi.MidiUnavailableException: Can not open line at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1132) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1036) ... Caused by: java.lang.IllegalArgumentException: No line matching interface SourceDataLine supporting format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian is supported. at javax.sound.sampled.AudioSystem.getLine(AudioSystem.java:476) at javax.sound.sampled.AudioSystem.getSourceDataLine(AudioSystem.java:604) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1066) ... 35 more As the messages mention a soft synthesizer, and pcm lines, I expect that the lack of some midi daemon is not the issue here. As far as I can tell, the alsa kernel modules are loaded, including snd_hda_intel, snd_pcm, snd_seq_midi among others. I've also included the alsa-base and alsa-utils packages in my installation. alsa-mixer looks good, using “HDA Intel PCH” as its default device. What other packages, configuration settings or daemon startups does java require to make its sound output work?

    Read the article

  • What could be causing frequent display freezes?

    - by austen
    I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

    Read the article

  • Cannot authenticate to SBS 2003

    - by Lerp
    I am trying to connect my machine to my work's entirely windows network and I am having a few issues: Whenever I try to access the server, the authentication dialog just keeps popping back up. I cannot connect to the printers (it says connecting to device failed) I have tried setting up samba, winbind, kerberos, likewise open all to no avail. I have a feeling I am just setting them up wrong. My nautilus shows this when I go to Network Windows Network MASTERMAGNETS I can ping both MASTERMAGNETS.LOCAL and 192.168.0.2 after modifying my /etc/hosts james@jamesmaddison:~$ cat /etc/hosts 127.0.0.1 localhost jamesmaddison 192.168.0.2 MASTERMAGNETS.LOCAL 192.168.0.50 Sharp-Printer # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters I believe that's the correct domain (not sure if that's the correct term) as when I do nslookup MASTERMAGNETS.LOCAL I get the following: james@jamesmaddison:~$ nslookup MASTERMAGNETS.LOCAL Server: 192.168.0.2 Address: 192.168.0.2#53 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.3 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.2 It all worked fine before I reinstalled Ubuntu and now I just cannot get access to the server. All help is appreciated, I need to get this working or I fear I will be forced to develop in a windows environment :(

    Read the article

  • Distributing an Android game with plugins via the market

    - by Peter Serwylo
    I'm new to Android development, and was wondering how the following could be achieved within the confines of the Android market as a distribution channel: One main application, which handles the main menu, networking, high scores, etc. Several games which can be launched from the main menu, which all work within the same eco system. The main application is not just a pseudo launcher for other games, these different games will share high scores and other achievements/preferences. In a traditional package management system such as apt, pacman or yum, this could be handled quite happily through dependencies. This does not appear to be possible via the Android market. The closest I've seen is when apps scan to check if the required app is installed, and if not, launches the market and asks the user to download the app. This sounds like a very messy solution. It also begs the question, would they download the game (plugin) first, which then downloads the main shell application? Or would they download the main shell application, and when they navigate to a menu item which says "Play game", then it scans for any installed games, and if none exist, redirects to the market? Also, I'm not even sure if it is possible to dig up the package from another application on the device, and start invoking classes from within (e.g. when you want to launch the game (plugin)) A final option is just to have a 3rd component which is a .jar that each game includes, which effectively contains the entire shell application. Then each game would appear to have the same menu, but it would become a nightmare as soon as you want to update the menu component and have to re-release each game. It would be especially worse if other people released games (plugins) based on the same framework and didn't update them. Is there any other options which I haven't thought of? Has anyone else solved this or seen a solution in any apps they've installed (doesn't have to be games)? cheers.

    Read the article

  • AT&T Application Resource Analyzer in NetBeans IDE

    - by Geertjan
    Here at Øredev in Malmö I met Doug Sillars who does developer outreach for the AT&T Application Resource Optimizer. In this YouTube clip you see Doug explaining how it works and what it can do for optimizing performance of mobile applications. There's a free and open source Android app on GitHub that you can install on Android to collect data and then there's a Java Swing application for analyzing the results. And here's what that application looks like as a plugin in NetBeans IDE, click to enlarge the image, which shows the Android sources of the Data Collector, as well as the Data Analyzer ready to be used to collect data: Since the ARO Data Analyzer is written in Java and has JPanels defining its UI layer, integrating the user interface wasn't hard. Now working on the Actions, so there'll be a new ARO menu with start/stop data collecting menu items, etc, reusing as much of the original code as possible. That part is actually already working. I started up an Android emulator, then started the data collection process from the IDE. Now need to include the Actions for importing the data into the analyzer, together with a few other related features. A pretty cool feature in ARO is video capture, so that a movie can be made by ARO of all the steps taken on the device during the collection process, which will also be nice to have integrated into the NetBeans plugin. Ultimately, this will be handy for anyone creating Android applications in NetBeans IDE since they'll be able to use AT&T's ARO tool for optimizing the performance of the applications they're developing. It will also be useful for those using the built-in Cordova tools in NetBeans IDE to create iOS applications because ARO is also applicable to analyzing iOS application performance.

    Read the article

  • Workaround for an Xcode/iOS SDK Issue...

    - by Joe Huang
    Hi, everyone: When you are doing ADF Mobile development, and you need to deploy the application to an iOS device, you would need to compile/deploy the app with iOS App Certificates and Provisioning Profile. This means you would need to "Deploy to Package" or "Deploy to iTunes" during deployment, and configure JDeveloper with the proper certificates/profiles. In some instances (exact combination is still not clear), deploy and signing the application to generate the ipa file may fail with similar error message at the end of the deployment log: [01:04:45 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s): Command-line execution failed (Return code: 1) error: /usr/bin/codesign --force --preserve-metadata=identifier,entitlements,resource-rules --sign iPhone Distribution: Oracle Corporation --resource-rules=/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app/ResourceRules.plist --entitlements /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/entitlements_plistEINPBkIG /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app failed with error 1. Output: /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature Program /usr/bin/codesign returned 1 : [/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature This issue is a known issue and is not related to ADF Mobile. The workaround is discussed in this article from StackOverflow. This article refers to the old location of Xcode, so you would need to adjust the paths accordingly. The path for Xcode 4.3 and above would be like: /Applications/Xcode.app/Contents//Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication to this script file. To modify it, you probably can’t use Text Editor. I end up opening a terminal session, changed the file permission, and used vi to update it. Thanks, Oracle ADF Mobile Product Management Team

    Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >