Search Results

Search found 16808 results on 673 pages for 'computer guru'.

Page 339/673 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• Hardware Compatibility

  - by thebradnet

  I am looking into buying a LENOVO RD330 SERVER with a ThinkServer RAID 500 Adapter II RAID controller. I am having problems finding out if all of the hardware that I am wanting will be compatible with Ubuntu. I have check the "Certified Hardware" list but the list is very limited. Both the computer and the RAID controller say they support RedHat and Suse but obviously Ubuntu isn't mentioned. I have talked with my vendor and they also not certain if this hardware will work. I have also Google around and the RAID controller appears to be an LSI chipset. But again I haven't been able to find any definitive information saying that this will work. Any suggestions on how I can find out if the hardware will work?

  Read the article

• Asciifi Is a Lightening Fast Web-Based ASCII Converter

  - by Jason Fitzpatrick

  If you have a hankering from some old-school ASCII artwork, Asciifi is a free and lightening fast HTML5 ASCII converter. Despite the simplicity of ASCII images (pictures created not out of a grid of colored pixels like a standard digital photograph but out of a grid of text characters) many ASCII converters are rather slow. Asciifi speeds up the process by rendering your images on the fly with a snappy HTML5-based converter. Visit the site, drag and drop your image, and almost instantaneously you’ll see the results. The output can be further tweaked by adjusting the line width and the character set used. Hit up the link below to take it for a test drive. Asciifi [via Digital Inspiration] HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

  Read the article

• Screen Lag/Running Slow

  - by Nick M

  I am having trouble with Ubuntu 12.10. Everything is working fine, although there is a slight problem. It seems to lag every once in a while, as in I will move the mouse, then about two seconds later the cursor will actually move on the screen. Is there any way to fix this? This is my first day using Ubuntu and I put it on a computer I built myself. I don't have much experience so a detailed answer would be very much appreciated.

  Read the article

• I can't figure out how to run ubuntu .iso from thumbdrive?

  - by Judge Cole Stanley

  I downloaded Ubuntu 12.04.1 and I can't find a solid way to run it from the disk version of Ubuntu 11.04 for a clean install. I think the hard drive is messed up, or else I would install 11.04, but it won't work. So I wanna install 12.04.1 from a thumbdrive, so I can actually use this computer without using the demo and installing everything when it dies, or shuts off... Please help? I want to make it at least bootable from a thumbdrive, just so I can lightly browse the internet and what not... it doesn't have to be a hard install.

  Read the article

• Something in the world of Firewall Hosted SSL VPN's

  - by AreYouSerious

  I run a Physical firewall at my residence. Call me paranoid, but I appreciate the added security. I have been working to get the VPN to work properly, but had until today not managed this. I worked with ensuring that the VPN configurations were correct, that the port filters were correct,  I could connect to the Firewall GUI, but never to the VPN. Turns out that in W7, if you add a key, it suddenly works.Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNELAdd DWORD(32-bit) - SendExtraRecord --> value 2 and voila, suddenly your presented with the login screen. I won't mention the specific vendor, as they don't have this listed in their fixes... but there are several venders where this is an issue. So, if you are having an issue connecting to an SSL VPN (web vpn) this might just be the solution that you need.

  Read the article

• How to Stream Media Files From any PC to Your PlayStation 3

  - by Zainul Franciscus

  Have you ever wished that you could stream video files from your computer over to your TV without actually hooking the two directly together? If you’ve got a PlayStation 3, you’re in luck, because that’s today’s geek lesson. If you’re wondering how to rip dvds to your PC, we’ve got you covered with an article on the subject, but you can stream video files that you’ve recorded yourself, or downloaded from somewhere. Image by playstation-themes Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup] Get the Old Microsoft Paint UI Back in Windows 7 Relax and Sleep Is a Soothing Sleep Timer Google Rolls Out Two-Factor Authentication Peaceful Early Morning by the Riverside Wallpaper

  Read the article

• how can i give other drives and partitions short, meaningful names (in nautilus)?

  - by honestann

  I have 4 disk drives in my 64-bit ubuntu 12.04 LTS computer at the moment, plus one external USB drive. In nautilus and unity the external drive has a nice short descriptive name "mcat", but all partitions on the 4 internal drives are displayed as a size (834GB filesystem) or a huge 32-character string form of a GUID: I'm guessing the external drive is nice, short, sweet and readable because that drive may have no partitions (well, just one I guess) and that name may be the drive label, whereas partitions usually don't have names. That may explain my problem, but doesn't solve it. Is there some way to give reasonable names to these partitions in nautilus and unity?

  Read the article

• I am not able to boot into window 7 after ubuntu 12.04 installation

  - by user91878

  not able to boot into window 7. I am naive in ubuntu usage. Pls guide immediately. The following link a got after boot repair. http://paste.ubuntu.com/1218634/ full message is as follows: you can now reboot your computer. Please do not forget to make your BIOS boot on sda (500GB) disk! The boot files of [The OS now in use - Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)

  Read the article

• Looking for a light weight note program.

  - by Erin

  This might belongs on superuser but for me it's part of programming so i will ask it here. I find I use notepad to keep chunks of data that are important but not important enough to keep in my head. The one problem with this is I end up with a lot of files on my desktop that I don't know what they are for, or I don't save the file and my computer gets rebooted for some reason. So that big ramble leads to the question. I am looking for a note taking system that is light weight and easy to manage. I would rather it not be a huge application like onenote but if that is what you are using and is is working well for you could you explain how you are doing it? Thanks Erin.

  Read the article

• Deleted windows partition, now I can't get into Ubuntu

  - by Alejandro

  Back story: I installed ubuntu with wubi. I had windows on one NTFS partition, then I made a new NTFS partition in which I put wubi in and where My ubuntu OS was born. Eventually I moved /home into another partition and made a swap partition, but I digress. I deleted My original NTFS partition where windows is not thinking it would not matter but now I can't get into ubuntu. And the weird thing is that when I boot my computer I still see the option to boot into both windows and ubuntu. When I try to boot into windows, It tries to fix stuff and never succeds. When I try to boot into ubuntu, it shows me "cannot find GRLDR in all devices. Press CTRL+ALT+DELETE to restart". so, what do you guys think? I just want ubuntu running again, with all my stuff in /home there and all my system preferences how I like them.

  Read the article

• Can I remove the latest ubuntu version without having to reinstall the old version?

  - by Emily

  I was using the 2.6 kernels with no problems, but when I updated to the 3.0 kernel, my bootup failed. I can manually boot with ctrl+alt+f1 startx and my login, but admittedly, i googled this and have no idea what I'm really doing. I have been trying to figure out how to go back to the old version, and eventually figured out the grub menu--i booted from all three 2.6 (.8, .10, and .11) editions of the previous version of ubuntu but they all had the same error as the 3.0 kernal. I can get logged in manually once the boot fails, but when i get to my desktop, wireless is not responsive and will not connect, and portable hard drives do not mount and/or are unresponsive. the previous version worked perfectly. I use an asus netbook. it's an eee pc. i don't have two OSs on it. i had to go to another computer to get to the forum... If the solution is simple, i just don't know what it is.

  Read the article

• Unable to recognize hard drive after replacing a drive

  - by Peter Schriver

  I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

  Read the article

• Get Hands On with Raspberry Pi via Free OS-Building Course

  - by Jason Fitzpatrick

  Cambridge University is now offering a free 12-segment course that will guide you through building an OS from scratch for the tiny Raspberry Pi development board–learn the ins and outs of basic OS design on the cheap. You’ll need a Raspberry Pi board, a computer running Windows, OS X, or Linux, and an SD card, as well as a small amount of free software. The 12-part tutorial starts you off with basic OS theory and then walks you through basic control of the board, graphics manipulation, and, finally, creating a command line interface for your new operating system. Hit up the link below to read more and check out the lessons. Baking Pi – Operating Systems Development HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• Ubuntu doesn't give the intended screen resolution

  - by JMCF125

  I have recently created a Ubuntu 12.04.2 64 bit virtual machine on VirtualBox, and I am not very used to Linux (I used Linux Mint for a few weeks some time ago), so please refer the full name of stuff, not just "the what-not-command". The problem is I can't set the full resolution my computer supports (I think it is 1366 by 768), I have found similar questions and tried most of the respective solutions, thy did not work. If I type xrandr to the terminal I get: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 640x480 60.0 As you can see, the maximum is too low. And in the settings of the screen (I mean, with GUI) only 1024x768 and 800x600 appear. I don't remember exactly which answer of those questions, but it was one in the terminal (again, with xrandr) that made the resolution I wanted appear (although it gave an error when selected, not even changing to the 1366x768 resolution first and then back to 1024x768).

  Read the article

• Good alternative to NetLimiter?

  - by Harsh

  There is a program NetLimiter for windows. While I was using Windows it was very useful for me to find out the IP address of the person who was downloading from me, or to know IP address of any person on LAN who was using DC++ with some nick. And after that I can easily know the computer name of that person using nbtstat. I was wondering if there is any tool for Ubuntu using which I can find out the IP address of person who is downloading from me or from whom I am downloading on LAN. I am on university LAN and we are using PtokaX and DC++ for file sharing on LAN. people sometimes put some offencive stuff on open chat on DC++ using some Nick and I don't know how to trace them while I am using Ubuntu.

  Read the article

• What is Cyber Monday? [Infographic]

  - by Jason Fitzpatrick

  Nearly everyone is familiar with Black Friday, the massive shopping day right after Thanksgiving, but Cyber Monday is a recent invention. Check out this infographic for the low down. Cyber Monday is only a scant six years old, an invention of online retailers looking to create a shopping day to compete with the in-store frenzy of Black Friday. Although quite a few retailers offer online Black Friday deals, Cyber Monday is a the biggest day for online deals–many shoppers fail to find the things they were looking for on Black Friday and turn to online sources. You can read more about Cyber Monday here or visit the link below for a higher resolution copy of the infographic. What Is Cyber Monday? [YouNeverLose via Mashable] How to See What Web Sites Your Computer is Secretly Connecting To HTG Explains: When Do You Need to Update Your Drivers? How to Make the Kindle Fire Silk Browser *Actually* Fast!

  Read the article

• How to choose the right web development language for my app without much programming experience?

  - by twinbornJoint

  I have my own idea for a web application, and I am not a programmer. The application will work similar to Facebook and Twitter, profiles and feeds. I have learned some computer science theory, all the way up to OOP, but have no practical experience. Without any experience, is there a way I can evaluate the different language and platform choices available to me? What kind of things should I be looking at? Ease of setup? How many followers it has? How can I evaluate whether a language will have the capabilities I need?

  Read the article

• Unity 5.1 audio issues (no sound in back channels)

  - by N0xus

  I've trying to bring in surround sound audio into my project. I've set my computer up to run in 5.1 and when I play a 6 channel audio through windows media player (it's a test audio that does left speaker, right speaker etc) it works fine. However, when I run it through Unity, all I get is the front 3 channels. I've set it in the Edit - project settings - audio to be 5.1 in there. I even set it in code with following: void Start() { AudioSettings.speakerMode = AudioSpeakerMode.Mode5point1; } How ever, when I run a debug line of: print ( AudioSettings.driverCaps); It tells me that Unity is only playing in stereo. Is there something I'm still not doing? I should also add I've ran 10 different tests using the 3D audio pan and spread options. I've set both to either being fully off, half way on and full. Still the same results.

  Read the article

• GNU GRUB version 1.99-21ubuntu3, DOES NOT WORK!

  - by Arthur

  I'm new to Ubuntu, I installed it but when I try to start it, tells me that I need to run commands from bash-like and they can be shown by tab, when I press tab shows me the commands but then I type them and nothing happens, I have to reset my computer and the same thing goes on. This is what it says: GNU GRUB version 1.99-21ubuntu3 Minimal bash-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. And nothing happens from there, can you tell what I need to do now? THANKS AGAIN!

  Read the article

• Ubuntu server 13 hangs on boot

  - by Slava Fomin II

  I formatted my WD30EFRX 3TB SATA HDD as GPT with the following layout: 200 MB FAT32 (BOOTABLE) 50GB EXT4 (Mount point: /) 4 GB SWAP SPACE ~2.9 TB EXT4 (with no mount point) Then i created a Flash USB using Rufus 1.3.3 and the following ISO-image: ubuntu-13.04-server-amd64.iso. I used following configuration to create the USB: GPT partition scheme for UEFI computer FAT32 (16KB) I successfully booted from this USB on my Intel D510MO motherboard in UEFI mode (there were a black and white boot loader menu instead of a colorful GUI) and installed the OS. During the boot loader installation i saw it was grub-efi-amd64 as it must be. After installation i removed the flash drive and tried to boot the system, but just after a BIOS POST it hangs (there is a white blinking cursor at the left top corner of the black screen) and nothing happens. UEFI Mode is enabled in the BIOS configuration and i've updated the BIOS to the latest firmware. What went wrong, how i can confirm that system was installed properly? How can i boot the OS?

  Read the article

• How to prevent ubuntu from connecting to wifi hotspots automatically

  - by calvin tiger

  Note: this question is distinct from "How to disable automatically connecting to WiFi?", as I do not wish to disable automatic WiFi connection in general. Problem: The Ubuntu WiFi module connects automatically in priority with WiFi networks without a password, even if there is a already known password-protected WiFi network nearby. Worse, most of the times these "unprotected" networks are in fact hotspots that require authentification from the browser. Example: I am at home, and most of the times my Ubuntu laptop will connect by itself to a nearby hotspot instead of choosing my local ADSL box (password-protected, with a password that is already known by the computer). I then have to select my own WiFi network manually. Is there a way to disable automatic connection to /all/ hotspots ?

  Read the article

• Running Windows 98 in 2013 with Modern Apps and Web

  - by Akemi Iwaya

  Do you ever have those moments when curiosity for the sake of fun gets a hold on you? Perhaps that curiosity gets focused on computer-related “what ifs” such as how well would a very old operating system handle being used with today’s modern apps and web? Nazmus Shakib Khandaker decided to find out how well Windows 98 could and would do in 2013. Have you tried something similar to this? Do you know of any individuals who are holding on to an older operating system no matter what? Share your experiences in the comments! Running Windows 98 in 2013 with Modern Web and Apps [YouTube]     

  Read the article

• What to do?! Upgrading from 12.10 to 13.04 failed :(

  - by Jon Ramirez

  I got an update reminder to go from 12.10 to 13.04. I followed the instructions, was able to download the package, and started installing. Up to a point where my computer (seemed to) restart and there was just a black screen (with the backlight on) for more than an hour. Then I decided that this was too long for an installation and forced my laptop to shut down. I think that messed it up. Now I'm stuck in what seems to be 13.04 with bits of 12.10 in it. I tried to upgrade again through software updater but it goes to Partial Upgrade. But when I try that, I get this error message: "An upgrade from 'raring' to 'quantal' is not supported by this tool." Help! What should I do! I'm running my Ubuntu on my Dell Inspiron.

  Read the article

• Ubuntu only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Why did Ubuntu and Windows start hanging mysteriously after I took a vacation?

  - by Ashrey Goel

  I installed Ubuntu alongside my Windows 7, after partitioning my HDD using Easeus partitioning manager. It was working perfectly, no problems, no data lost or corruption. Then I went away for 2 days and in my absence I don't know what happened in that period, now both Windows 7 and Ubuntu keep hanging continuously, like when you paint and change a brush it'll hang, I mean on very simple commands and I know my computer does not hang on such petty things. I use it for developing music and the specification are: Model: DELL-XPS Processor: Intel i5, 2.53 GHz RAM/Memory: 4GB Hard disk size: 500GB HDD Windows 7 partition: 417 GB Ubuntu Partition: 50 GB Please Help.

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >