Search Results

Search found 926 results on 38 pages for 'ignoring'.

Page 34/38 | < Previous Page | 30 31 32 33 34 35 36 37 38  | Next Page >

• Git repo planning questions

  - by masonk

  At work, development uses perforce to handle code sharing. I won't say "revision control", because we aren't allowed to check in changes until they are ready for regression testing. In order to get my personal change sets under revision control, I've been given the go-ahead to build my own git and initialize the client view of the perforce depot as a git repo. There are some difficulties in doing this, however. The client view lives in a subfolder of ~, (~/p4), and I want to put ~ under revision control as well, with its own separate history. I can't figure out how to keep the history for ~ separate from ~/p4 without using a submodule. The problem with a submodule is that it looks like I have to go make a repository that will become the submodule and then git submodule add <repo> <path>. But there is nowhere to make the submodule's repository except in ~. There seems to be no safe place to create the initial client view of the depot with git p4 clone. (I'm working off of the assumption that initing or cloning a repo into a subdirectory of a git repo is not supported. At least, I can find nothing authoritative on nested git repos.) edit: Is merely ignoring ~/p4 in the repo rooted at ~ enough to allow me to init a nested repo in ~/p4? My __git_ps1 function still thinks I'm in a git repository when I visit an ignored subdirectory of a git repo, so I'm inclined to think not. I need the "remote" repository created by git p4 sync to be a branch in ~/p4. We are required to keep all of our code in ~/p4 so that it doesn't get backed up. Can I pull from a "remote" branch that is really a local branch? This one is just for convenience, but I thought I could learn something by asking it. For 99% of the project, I just want to start the with the p4 head revision as the inital commit object. For the other 1%, I would like to suck down the entire p4 history so that I can browse it in git. IOW, after I'm done initalizing it, the initial commit of remotes/p4/master branch will contain: revision 1 of //depot/prod/Foo/Bar/* revision X of other files in //depot/prod/*, where X is the head revision and the remotes/p4/master branch contains Y commits, where Y is the number of changelists that had a file in //depot/prod/Foo/Bar/*, with each commit in the history corresponding to one of those p4 changelists, and HEAD looking like p4's head.

  Read the article

• jQuery ajaxSubmit ignored by IE8

  - by George Burrell

  Hi there, I am combing the jQuery validation plug-in with the jQuery Form Plugin to submit the form via AJAX. This works perfectly in Firefox & Chrome, but (as usual) Internet Explorer is being a pain. For reasons that are alluding me, IE is ignoring the ajaxSubmit, as a result it submits the form in the normal fashion. I've followed the validation plug-in's documentation when constructing my code: JS: $(document).ready(function() { var validator = $("#form_notify").validate({ messages: { email: { required: 'Please insert your email address. Without your email address we will not be able to contact you!', email:'Please enter a valid email address. Without a valid email address we will not be able to contact you!' } }, errorLabelContainer: "#error", success: "valid", submitHandler: function(form) {$(form).ajaxSubmit();} }); $('#email').blur(function() { if (validator.numberOfInvalids() 0) { $("#label").addClass("label_error"); return false; } else {$("#label").removeClass("label_error");} }); $('#form_notify').submit(function() { if (validator.numberOfInvalids() == 0) { $(this).fadeOut('fast', function() {$('#thank-you').fadeIn();}); return true; } return false; }); }); Form HTML: <form id="form_notify" class="cmxform" name="form_notify" action="optin.pl" method="get"> <fieldset> <div class="input"> <label id="label" for="email">Email Address:</label> <input type="text" id="email" name="email" value="" title="email address" class="{required:true, email:true}"/> <div class="clearfix"></div> </div> <input type="hidden" name="key" value="sub-745-9.224;1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0;;subscribe-224.htm"> <input type="hidden" name="followup" value="19"> <input type="submit" name="submit" id="submit-button" value="Notify Me"> <div id="error"></div> </fieldset> </form> I can't understand what is causing IE to act differently, any assistance would be greatly appreciated. I can provide more information if needed. Thanks in advance!

  Read the article

• Form submits correctly in Chrome/FF, but fails altogether in IE/Safari

  - by culov

  I have a form with a css submit button. When a the submit button is clicked, i call a function that executes: document.forms["request"].onsubmit(); What should happen, then, is that the onsubmit method ought to be triggered. This works properly in Chrome/FF, but for some reason IE/Safari will bypass the onsubmit function and simply add the parameter "address=" onto the url as if it were submitting the form and ignoring the onsubmit function. Heres the code for the form: <form id="request" method="get" onsubmit="addLocation(this.address.value); return false;"> <br> <label style="position:relative;left:5px;" for="address">Enter an intersection or address: </label> <br> <br> <input style="height:35px; width:300px;position:relative;bottom:1px;left:10px;" id="address" name="address" class="required address"/> <a style="float:right;right:120px;position:relative;" class="button" onclick="submit();"> <span>Submit Request </span> </a> </form> and what follows are some relevant js functions: function addLocation(address) { if (geocoder) { geocoder.getLocations(address, function (point) { if (!point) { alert(address + " not found"); } else { if (point.Placemark[0].address != submittedString) { submittedString = point.Placemark[0].address; addRow(point.Placemark[0].address); req = "addrequest?truck=" + "coolhaus&address=" + point.Placemark[0].address; alert(req); addRequest(req); request.onreadystatechange = function () {} } } }); } } function addRequest(req) { try { request = new XMLHttpRequest(); } catch (e) { try { request = new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) { alert("XMLHttpRequest error: " + e); } } request.open("GET", req, true); request.send(null); return request; } You can test the form here: http://la.truxmap.com/request?id=grillmastersla Thanks so much!

  Read the article

• rails named_scope ignores eager loading

  - by Craig

  Two models (Rails 2.3.8): User; username & disabled properties; User has_one :profile Profile; full_name & hidden properties I am trying to create a named_scope that eliminate the disabled=1 and hidden=1 User-Profiles. The User model is usually used in conjunction with the Profile model, so I attempt to eager-load the Profile model (:include = :profile). I created a named_scope on the User model called 'visible': named_scope :visible, { :joins => "INNER JOIN profiles ON users.id=profiles.user_id", :conditions => ["users.disabled = ? AND profiles.hidden = ?", false, false] } I've noticed that when I use the named_scope in a query, the eager-loading instruction is ignored. Variation 1 - User model only: # UserController @users = User.find(:all) # User's Index view <% for user in @users %> <p><%= user.username %></p> <% end %> # generates a single query: SELECT * FROM `users` Variation 2 - use Profile model in view; lazy load Profile model # UserController @users = User.find(:all) # User's Index view <% for user in @users %> <p><%= user.username %></p> <p><%= user.profile.full_name %></p> <% end %> # generates multiple queries: SELECT * FROM `profiles` WHERE (`profiles`.user_id = 1) ORDER BY full_name ASC LIMIT 1 SHOW FIELDS FROM `profiles` SELECT * FROM `profiles` WHERE (`profiles`.user_id = 2) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 3) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 4) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 5) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 6) ORDER BY full_name ASC LIMIT 1 Variation 3 - eager load Profile model # UserController @users = User.find(:all, :include => :profile) #view; no changes # two queries SELECT * FROM `users` SELECT `profiles`.* FROM `profiles` WHERE (`profiles`.user_id IN (1,2,3,4,5,6)) Variation 4 - use name_scope, including eager-loading instruction #UserConroller @users = User.visible(:include => :profile) #view; no changes # generates multiple queries SELECT `users`.* FROM `users` INNER JOIN profiles ON users.id=profiles.user_id WHERE (users.disabled = 0 AND profiles.hidden = 0) SELECT * FROM `profiles` WHERE (`profiles`.user_id = 1) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 2) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 3) ORDER BY full_name ASC LIMIT 1 SELECT * FROM `profiles` WHERE (`profiles`.user_id = 4) ORDER BY full_name ASC LIMIT 1 Variation 4 does return the correct number of records, but also appears to be ignoring the eager-loading instruction. Is this an issue with cross-model named scopes? Perhaps I'm not using it correctly. Is this sort of situation handled better by Rails 3?

  Read the article

• What to Return? Error String, Bool with Error String Out, or Void with Exception

  - by Ranger Pretzel

  I spend most of my time in C# and am trying to figure out which is the best practice for handling an exception and cleanly return an error message from a called method back to the calling method. For example, here is some ActiveDirectory authentication code. Please imagine this Method as part of a Class (and not just a standalone function.) bool IsUserAuthenticated(string domain, string user, string pass, out errStr) { bool authentic = false; try { // Instantiate Directory Entry object DirectoryEntry entry = new DirectoryEntry("LDAP://" + domain, user, pass); // Force connection over network to authenticate object nativeObject = entry.NativeObject; // No exception thrown? We must be good, then. authentic = true; } catch (Exception e) { errStr = e.Message().ToString(); } return authentic; } The advantages of doing it this way are a clear YES or NO that you can embed right in your If-Then-Else statement. The downside is that it also requires the person using the method to supply a string to get the Error back (if any.) I guess I could overload this method with the same parameters minus the "out errStr", but ignoring the error seems like a bad idea since there can be many reasons for such a failure... Alternatively, I could write a method that returns an Error String (instead of using "out errStr") in which a returned empty string means that the user authenticated fine. string AuthenticateUser(string domain, string user, string pass) { string errStr = ""; try { // Instantiate Directory Entry object DirectoryEntry entry = new DirectoryEntry("LDAP://" + domain, user, pass); // Force connection over network to authenticate object nativeObject = entry.NativeObject; } catch (Exception e) { errStr = e.Message().ToString(); } return errStr; } But this seems like a "weak" way of doing things. Or should I just make my method "void" and just not handle the exception so that it gets passed back to the calling function? void AuthenticateUser(string domain, string user, string pass) { // Instantiate Directory Entry object DirectoryEntry entry = new DirectoryEntry("LDAP://" + domain, user, pass); // Force connection over network to authenticate object nativeObject = entry.NativeObject; } This seems the most sane to me (for some reason). Yet at the same time, the only real advantage of wrapping those 2 lines over just typing those 2 lines everywhere I need to authenticate is that I don't need to include the "LDAP://" string. The downside with this way of doing it is that the user has to put this method in a try-catch block. Thoughts? Is there another way of doing this that I'm not thinking of?

  Read the article

• Android: simple webview code. ERR: Unable to start Activity

  - by vnshetty

  I have following code: public class reader extends Activity { WebView mWebView; String mFilename; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); mWebView = (WebView) findViewById(R.id.webView1); setContentView(R.layout.webview); mWebView.loadUrl("http://www.google.com"); } } When I run this, the emulator shows "Sorry:.. mireader Stopped unexpectedly" error.. Why ? DDMS log dump: 03-02 12:25:26.430: INFO/AndroidRuntime(2837): NOTE: attach of thread 'Binder Thread #3' failed 03-02 12:25:26.729: INFO/ActivityManager(72): Start proc com.mireader for activity com.mireader/.reader: pid=2846 uid=10032 gids={3003, 1015} 03-02 12:25:29.621: DEBUG/AndroidRuntime(2846): Shutting down VM 03-02 12:25:29.621: WARN/dalvikvm(2846): threadid=1: thread exiting with uncaught exception (group=0x4001d800) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): FATAL EXCEPTION: main 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.mireader/com.mireader.reader}: java.lang.NullPointerException 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread.access$2300(ActivityThread.java:125) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2033) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.os.Handler.dispatchMessage(Handler.java:99) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.os.Looper.loop(Looper.java:123) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread.main(ActivityThread.java:4627) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at java.lang.reflect.Method.invokeNative(Native Method) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at java.lang.reflect.Method.invoke(Method.java:521) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at dalvik.system.NativeStart.main(Native Method) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): Caused by: java.lang.NullPointerException 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at com.mireader.reader.onCreate(reader.java:36) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2627) 03-02 12:25:29.660: ERROR/AndroidRuntime(2846): ... 11 more 03-02 12:25:29.699: WARN/ActivityManager(72): Force finishing activity com.mireader/.reader 03-02 12:25:30.550: WARN/ActivityManager(72): Activity pause timeout for HistoryRecord{44f98868 com.mireader/.reader} 03-02 12:25:33.230: DEBUG/dalvikvm(200): GC_EXPLICIT freed 164 objects / 11312 bytes in 7516ms 03-02 12:25:35.020: INFO/Process(2846): Sending signal. PID: 2846 SIG: 9 03-02 12:25:35.080: WARN/InputManagerService(72): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@44fc35e0 03-02 12:25:35.809: INFO/ActivityManager(72): Process com.mireader (pid 2846) has died. 03-02 12:25:37.960: DEBUG/dalvikvm(320): GC_EXPLICIT freed 83 objects / 4000 bytes in 78ms 03-02 12:25:42.674: WARN/ActivityManager(72): Activity destroy timeout for HistoryRecord{44f98868 com.mireader/.reader}

  Read the article

• problem with custom NSProtocol and caching on iPhone

  - by TomSwift

  My iPhone app embeds a UIWebView which loads html via a custom NSProtocol handler I have registered. My problem is that resources referenced in the returned html, which are also loaded via my custom protocol handler, are cached and never reloaded. In particular, my stylesheet is cached: <link rel="stylesheet" type="text/css" href="./styles.css" /> The initial request to load the html in the UIWebView looks like this: NSString* strUrl = [NSMutableString stringWithFormat: @"myprotocol:///entry?id=%d", entryID ]; NSURL* url = [NSURL URLWithString: strUrl]; [_pCurrentWebView loadRequest: [NSURLRequest requestWithURL: url cachePolicy: NSURLRequestReloadIgnoringLocalCacheData timeoutInterval: 60 ]]; (note the cache policy is set to ignore, and I've verified this cache policy carries through to subsequent requests for page resources on the initial load) The protocol handler loads the html from a database and returns it to the client using code like this: // create the response record NSURLResponse *response = [[NSURLResponse alloc] initWithURL: [request URL] MIMEType: mimeType expectedContentLength: -1 textEncodingName: textEncodingName]; // get a reference to the client so we can hand off the data id client = [self client]; // turn off caching for this response data [client URLProtocol: self didReceiveResponse:response cacheStoragePolicy: NSURLCacheStorageNotAllowed]; // set the data in the response to our jfif data [client URLProtocol: self didLoadData:data]; [data release]; (Note the response cache policy is "not allowed"). Any ideas how I can make it NOT cache my styles.css resource? I need to be able to dynamically alter the content of this resource on subsequent loads of html that references this file. I thought clearing the shared url cache would work, but it doesnt: [[NSURLCache sharedURLCache] removeAllCachedResponses]; One thing that does work, but it's terribly inefficient, is to dynamically cache-bust the url for the stylesheet by adding a timestamp parameter: <link rel="stylesheet" type="text/css" href="./styles.css?ts=1234567890" /> To make this work I have to load my html from the db, search and replace the url for the stylesheet with a cache-busting parameter that changes on each request. I'd rather not do this. My presumption is that there is no problem if I were to load my content via the built-in HTTP protocol. In that case, I'm guessing that the UIWebView looks at any Cache-Control flags in the NSURLHTTPResponse object's http headers and abides by them. Since my NSURLResponseObject has no http headers (it's not http...) then perhaps UIWebView just decides to cached the resource (ignoring the NSURLRequest caching directive?). Ideas???

  Read the article

• div automatically added in $item->get_description(); using simplepie

  - by Carey Estes

  I am getting a div that is appearing in the output from calling a RSS feed. It is ignoring my attempts to wrap it in a paragraph tag and pushes the data out to the div. foreach ($feed->get_items(0 , 3) as $item): $feedDescription = $item->get_content(); $image = returnImage($feedDescription); $image = scrapeImage($image); $image_url= $item->get_permalink(); $description = $item->get_description(); ?> <div class="item"> <h4><a href="<?php echo $item->get_permalink(); ?>"><?php echo $item->get_title(); ?></a></h4> <div class="image-box"><?php echo '<a href="' . $image_url . '"><img src="' . $image . '" /></a>'."\n";?></div> <p><?php echo $description ?></p> <p><a href="<?php echo $item->get_permalink(); ?>">Continue Reading</a></p> </div> <?php endforeach; ?> Here is the html output: <div class="item"> <h4><a href="#">Lorem Ipsum</a></h4> <div class="image-box"><a href="#"><img src="image.jpg"></a> </div> <p></p> <div>Lorem Ipsum description [...]</div> <p></p> <p><a href="#">Continue Reading</a></p> </div> Why does the description call add a div tag and not get wrapped in the paragraph tag?

  Read the article

• PInvokeStackImbalance C# call to unmanaged C++ function

  - by user287498

  After switching to VS2010, the managed debug assistant is displaying an error about an unbalanced stack from a call to an unmanaged C++ function from a C# application. The usuals suspects don't seem to be causing the issue. Is there something else I should check? The VS2008 built C++ dll and C# application never had a problem, no weird or mysterious bugs - yeah, I know that doesn't mean much. Here are the things that were checked: The dll name is correct. The entry point name is correct and has been verified with depends.exe - the code has to use the mangled name and it does. The calling convention is correct. The sizes and types all seem to be correct. The character set is correct. There doesn't seem to be any issues after ignoring the error and there isn't an issue when running outside the debugger. C#: [DllImport("Correct.dll", EntryPoint = "SuperSpecialOpenFileFunc", CallingConvention = CallingConvention.StdCall, CharSet = CharSet.Ansi, ExactSpelling = true)] public static extern short SuperSpecialOpenFileFunc(ref SuperSpecialStruct stuff); [StructLayout(LayoutKind.Sequential, Pack = 1, CharSet = CharSet.Ansi)] public struct SuperSpecialStruct { public int field1; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)] public string field2; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 20)] public string field3; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 10)] public string field4; public ushort field5; public ushort field6; public ushort field7; public short field8; public short field9; public uint field10; public short field11; }; C++: short SuperSpecialOpenFileFunc(SuperSpecialStruct * stuff); struct SuperSpecialStruct { int field1; char field2[256]; char field3[20]; char field4[10]; unsigned short field5; unsigned short field6; unsigned short field7; short field8; short field9; unsigned int field10; short field11; }; Here is the error: Managed Debugging Assistant 'PInvokeStackImbalance' has detected a problem in 'Managed application path'. Additional Information: A call to PInvoke function 'SuperSpecialOpenFileFunc' has unbalanced the stack. This is likely because the managed PInvoke signature does not match the unmanaged target signature. Check that the calling convention and parameters of the PInvoke signature match the target unmanaged signature.

  Read the article

• How to know when a user has really released a key in Java?

  - by Luis Soeiro

  (Edited for clarity) I want to detect when a user presses and releases a key in Java Swing, ignoring the keyboard auto repeat feature. I also would like a pure Java approach the works on Linux, Mac OS and Windows. Requirements: When the user presses some key I want to know what key is that; When the user releases some key, I want to know what key is that; I want to ignore the system auto repeat options: I want to receive just one keypress event for each key press and just one key release event for each key release; If possible, I would use items 1 to 3 to know if the user is holding more than one key at a time (i.e, she hits 'a' and without releasing it, she hits "Enter"). The problem I'm facing in Java is that under Linux, when the user holds some key, there are many keyPress and keyRelease events being fired (because of the keyboard repeat feature). I've tried some approaches with no success: Get the last time a key event occurred - in Linux, they seem to be zero for key repeat, however, in Mac OS they are not; Consider an event only if the current keyCode is different from the last one - this way the user can't hit twice the same key in a row; Here is the basic (non working) part of code: import java.awt.event.KeyListener; public class Example implements KeyListener { public void keyTyped(KeyEvent e) { } public void keyPressed(KeyEvent e) { System.out.println("KeyPressed: "+e.getKeyCode()+", ts="+e.getWhen()); } public void keyReleased(KeyEvent e) { System.out.println("KeyReleased: "+e.getKeyCode()+", ts="+e.getWhen()); } } When a user holds a key (i.e, 'p') the system shows: KeyPressed: 80, ts=1253637271673 KeyReleased: 80, ts=1253637271923 KeyPressed: 80, ts=1253637271923 KeyReleased: 80, ts=1253637271956 KeyPressed: 80, ts=1253637271956 KeyReleased: 80, ts=1253637271990 KeyPressed: 80, ts=1253637271990 KeyReleased: 80, ts=1253637272023 KeyPressed: 80, ts=1253637272023 ... At least under Linux, the JVM keeps resending all the key events when a key is being hold. To make things more difficult, on my system (Kubuntu 9.04 Core 2 Duo) the timestamps keep changing. The JVM sends a key new release and new key press with the same timestamp. This makes it hard to know when a key is really released. Any ideas? Thanks

  Read the article

• Code golf - hex to (raw) binary conversion

  - by Alnitak

  In response to this question asking about hex to (raw) binary conversion, a comment suggested that it could be solved in "5-10 lines of C, or any other language." I'm sure that for (some) scripting languages that could be achieved, and would like to see how. Can we prove that comment true, for C, too? NB: this doesn't mean hex to ASCII binary - specifically the output should be a raw octet stream corresponding to the input ASCII hex. Also, the input parser should skip/ignore white space. edit (by Brian Campbell) May I propose the following rules, for consistency? Feel free to edit or delete these if you don't think these are helpful, but I think that since there has been some discussion of how certain cases should work, some clarification would be helpful. The program must read from stdin and write to stdout (we could also allow reading from and writing to files passed in on the command line, but I can't imagine that would be shorter in any language than stdin and stdout) The program must use only packages included with your base, standard language distribution. In the case of C/C++, this means their respective standard libraries, and not POSIX. The program must compile or run without any special options passed to the compiler or interpreter (so, 'gcc myprog.c' or 'python myprog.py' or 'ruby myprog.rb' are OK, while 'ruby -rscanf myprog.rb' is not allowed; requiring/importing modules counts against your character count). The program should read integer bytes represented by pairs of adjacent hexadecimal digits (upper, lower, or mixed case), optionally separated by whitespace, and write the corresponding bytes to output. Each pair of hexadecimal digits is written with most significant nibble first. The behavior of the program on invalid input (characters besides [a-fA-F \t\r\n], spaces separating the two characters in an individual byte, an odd number of hex digits in the input) is undefined; any behavior (other than actively damaging the user's computer or something) on bad input is acceptable (throwing an error, stopping output, ignoring bad characters, treating a single character as the value of one byte, are all OK) The program may write no additional bytes to output. Code is scored by fewest total bytes in the source file. (Or, if we wanted to be more true to the original challenge, the score would be based on lowest number of lines of code; I would impose an 80 character limit per line in that case, since otherwise you'd get a bunch of ties for 1 line).

  Read the article

• Microsoft Word Document Controls not accepting carriage returns

  - by Scott

  So, I have a Microsoft Word 2007 Document with several Plain Text Format (I have tried Rich Text Format as well) controls which accept input via XML. For carriage returns, I had the string being passed through XML containing "\r\n" when I wanted a carriage return, but the word document ignored that and just kept wrapping things on the same line. I also tried replacing the \r\n with System.Environment.NewLine in my C# mapper, but that just put in \r\n anyway, which still didn't work. Note also that on the control itself I have set it to "Allow Carriage Returns (Multiple Paragrpahs)" in the control properties. This is the XML for the listMapper <Field id="32" name="32" fieldType="SimpleText"> <DataSelector path="/Data/DB/DebtProduct"> <InputField fieldType="" path="/Data/DB/Client/strClientFirm" link="" type=""/> <InputField fieldType="" path="strClientRefDebt" link="" type=""/> </DataSelector> <DataMapper formatString="{0} Account Number: {1}" name="SimpleListMapper" type=""> <MapperData> </MapperData> </DataMapper> </Field> Note that this is the listMapper C# where I actually map the list (notice where I try and append the system.environment.newline) namespace DocEngine.Core.DataMappers { public class CSimpleListMapper:CBaseDataMapper { public override void Fill(DocEngine.Core.Interfaces.Document.IControl control, CDataSelector dataSelector) { if (control != null && dataSelector != null) { ISimpleTextControl textControl = (ISimpleTextControl)control; IContent content = textControl.CreateContent(); CInputFieldCollection fileds = dataSelector.Read(Context); StringBuilder builder = new StringBuilder(); if (fileds != null) { foreach (List<string> lst in fileds) { if (CanMap(lst) == false) continue; if (builder.Length > 0 && lst[0].Length > 0) builder.Append(Environment.NewLine); if (string.IsNullOrEmpty(FormatString)) builder.Append(lst[0]); else builder.Append(string.Format(FormatString, lst.ToArray())); } content.Value = builder.ToString(); textControl.Content = content; applyRules(control, null); } } } } } Does anybody have any clue at all how I can get MS Word 2007 (docx) to quit ignoring my newline characters??

  Read the article

• Dealing with personal failure

  - by codeelegance

  A while ago I was given the task of updating and extending the functionality of a software project. I was given a year to make the needed changes working solo. A month into development I came to the conclusion that it would take longer to change the existing product than to rewrite it from the ground up. I'd never attempted a complete rewrite so I talked with my boss about it and he was thrilled with the idea. I'm a fan of agile development but had never had the opportunity to take advantage of all of the prescribed practices so when I set to work I tried to incorporate as many as I could. I didn't have direct access to the customer and my coworkers (non-programmers) knew the business domain but were already so busy they didn't really have time to participate in design meetings so I resigned to working in the dark and occasionally calling one of them over to my desk to get feedback on my progress. I used TDD and refactored mercilessly and even tried taking a domain driven design approach. Things went well for a while. As the deadline came closer and the complexity of the project grew my productivity start slipping. I found myself cutting corners and ignoring the practices I had established as the pressure increased to meet the deadline. I also started working late nights and weekends to keep up with the load. In the end it made little difference how hard I worked. The project missed its deadline and what was completed wasn't enough to give to the customer. I had failed. Not only had I not finished on time but the previous version had sat untouched for almost a year so it wouldn't be of any help. Luckily we had another product that offered some of the same functionality. My boss decided to cancel the project entirely and moved all our orphaned customers to the other product. I spent weeks (along with everyone else at the company) manning the phones providing technical support for those customers. After it was all over, my boss was gracious enough not to fire me for nearly ruining the company. I was moved to the other product and have been trying to redeem myself ever since. Where did I go wrong? Has anyone else had to deal with this kind of defeat? How did you recover?

  Read the article

• Reliable session faulting for unknown reason

  - by Scarfman007

  I am trying to achieve the following - one client-side proxy instance (kept open) accessed by multiple threads using a reliable session. What I have managed so far is to have either A) a reliable session with a client-side proxy which is created and disposed per call or B) what I aim for, but without a reliable session. When I enable reliable sessions on my binding however, the following behaviour is exhibited: Client-side Upon application startup everything appears to work fine until roughly 18 messages in to the WCF session. I firstly get the proxy.InnerChannel.Faulted event raised, then an exception is caught at the point where I am calling the method on the proxy. The exception is a System.TimeoutException, with message: "The request channel timed out while waiting for a reply after 00:00:59.9062512. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout." The inner exception has a similar message: "The request operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout." With the method at the top of the inner stack trace being: System.ServiceModel.Channels.ReliableRequestSessionChannel.SyncRequest.WaitForReply(TimeSpan timeout) I then call proxy.Close followed by proxy.Abort (catching and ignoring exceptions). If I utilize the default settings (i.e. have simply <reliableSession/>), then calling proxy. Close results in another System.Timeout exception (although this time the allotted timeout is 00:00:00), however if I override the defaults as specified above no exception is thrown. Service-side Utilizing WCF tracing I get a System.ServiceModel.CommunicationException, with message: "The sequence has been terminated by the remote endpoint. The session has stopped waiting for a particular reply. Because of this the reliable session cannot continue. The reliable session was faulted." And a stack trace ending at: System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) When remotely attaching to the server I get the same message, which occurs when code execution steps over the return statement of my service in the service call which causes the error. The puzzling thing to me is that the service is stable and runs with options A) or B) as decribed at the beginning of my post, and occurs after a varying number of messages (around 18). The former fact points to there being nothing wrong with the code (indeed I have checked that no exceptions are thrown), and the latter just serves to confuse me and is why I modified the settings on the reliable session binding. I am quite stuck on this. Can anyone suggest why the reliable session would fault in such a way?

  Read the article

• LoaderContext and ApplicationDomain changes with Adobe AIR ?

  - by Tyn

  Hello, I'm currently experimenting with loading external SWF files from both an standard AS3 application, and an AIR application. It seems that the AIR application doesn't act the same way a standard SWF run by the Flash Player does. According to the documentation, the applicationDomain property of LoaderContext is usable in an AIR application too, but it just seems to be not working. I have the following code : package { import flash.display.Loader; import flash.display.LoaderInfo; import flash.display.Sprite; import flash.events.Event; import flash.net.URLRequest; import flash.system.ApplicationDomain; import flash.system.LoaderContext; public class Invoker extends Sprite { private var _ldr : Loader; public function Invoker() { _ldr = new Loader(); _ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, onChildOneComplete); var ldrC : LoaderContext = new LoaderContext(false, new ApplicationDomain(ApplicationDomain.currentDomain) ); _ldr.load(new URLRequest("otherSwf.swf"), ldrC); } private function onChildOneComplete(e : Event) : void { var c1ad : ApplicationDomain = (e.target as LoaderInfo).applicationDomain; var inad : ApplicationDomain = ApplicationDomain.currentDomain; trace("Child One parentDomain : " + c1ad.parentDomain); trace("Invoker parentDomain : " + inad.parentDomain); trace("Child One has Invoker : " + c1ad.hasDefinition("Invoker")); trace("Invoker has Invoker : " + inad.hasDefinition("Invoker")); } } } Compiling this code as an SWF file and launching it with the Flash Player does this output, which seems right : Child One parentDomain : [object ApplicationDomain] Invoker parentDomain : null Child One has Invoker : true Invoker has Invoker : true But the same code as an AIR application does a different output : Child One parentDomain : null Invoker parentDomain : null Child One has Invoker : false Invoker has Invoker : true According to the documentation, the first output (using a SWF with Flash Player, and not an AIR application) is the right one. Also, playing around with this snippet and changing the application domain to others possible configurations (like new ApplicationDomain(null), or ApplicationDomain.currentDomain) does exaclty what the documentation says with the SWF, but does not change the output of the AIR application. Any clue why AIR is simply ignoring the application domain passed to the loader context ? Any documentation about this particular issue ? Thank you very much.

  Read the article

• propertyplaceholderconfigurer class name substitution problem

  - by Alex

  The following example works for "class name substitution using the PropertyPlaceHolderConfigurer": http://forum.springsource.org/showpost.php?p=228136&postcount=2 HOWEVER, when porting this code over (messages.properties, com.spring.ioc.TestClass, and spring-config.xml) to a web application, the class name substitution now fails! 1) I am running on the webapp on Tomcat through the Eclipse plugin. 2) In the web.xml I have the following: <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/spring-config.xml</param-value> </context-param> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> 3) The following is output in the log: 282 [main] DEBUG org.springframework.beans.factory.support.DefaultListableBeanFactory - Ignoring bean class loading failure for bean 'test' org.springframework.beans.factory.CannotLoadBeanClassException: Cannot find class [${test.class}] for bean with name 'test' defined in ServletContext resource [/WEB-INF/spring-config.xml]; nested exception is java.lang.ClassNotFoundException: ${test.class} at org.springframework.beans.factory.support.AbstractBeanFactory.resolveBeanClass(AbstractBeanFactory.java:1141) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.predictBeanType(AbstractAutowireCapableBeanFactory.java:524) at org.springframework.beans.factory.support.AbstractBeanFactory.isFactoryBean(AbstractBeanFactory.java:1177) at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeanNamesForType(DefaultListableBeanFactory.java:222) at org.springframework.context.support.AbstractApplicationContext.invokeBeanFactoryPostProcessors(AbstractApplicationContext.java:505) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:362) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3795) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4252) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardHost.start(StandardHost.java:736) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) at org.apache.catalina.core.StandardService.start(StandardService.java:448) at org.apache.catalina.core.StandardServer.start(StandardServer.java:700) at org.apache.catalina.startup.Catalina.start(Catalina.java:552) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433) Caused by: java.lang.ClassNotFoundException: ${test.class} at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1438) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1284) at org.springframework.util.ClassUtils.forName(ClassUtils.java:211) at org.springframework.beans.factory.support.AbstractBeanDefinition.resolveBeanClass(AbstractBeanDefinition.java:385) at org.springframework.beans.factory.support.AbstractBeanFactory.resolveBeanClass(AbstractBeanFactory.java:1138) ... 23 more Note: I haven't included it, but the PropertyPlaceHolderConfigurer is successfully locating the messages.properties file, but this seems to happen AFTER the above error is output?! DOES ANYBODY KNOW WHY THIS IS THE CASE AND HOW I CAN OVERCOME THIS PROBLEM?

  Read the article

• Finding contained bordered regions from Excel imports.

  - by dmaruca

  I am importing massive amounts of data from Excel that have various table layouts. I have good enough table detection routines and merge cell handling, but I am running into a problem when it comes to dealing with borders. Namely performance. The bordered regions in some of these files have meaning. Data Setup: I am importing directly from Office Open XML using VB6 and MSXML. The data is parsed from the XML into a dictionary of cell data. This wonks wonderfully and is just as fast as using docmd.transferspreadsheet in Access, but returns much better results. Each cell contains a pointer to a style element which contains a pointer to a border element that defines the visibility and weight of each border (this is how the data is structured inside OpenXML, also). Challenge: What I'm trying to do is find every region that is enclosed inside borders, and create a list of cells that are inside that region. What I have done: I initially created a BFS(breadth first search) fill routine to find these areas. This works wonderfully and fast for "normal" sized spreadsheets, but gets way too slow for imports into the thousands of rows. One problem is that a border in Excel could be stored in the cell you are checking or the opposing border in the adjacent cell. That's ok, I can consolidate that data on import to reduce the number of checks needed. One thing I thought about doing is to create a separate graph that outlines the cells using the borders as my edges and using a graph algorithm to find regions that way, but I'm having trouble figuring out how to implement the algorithm. I've used Dijkstra in the past and thought I could do similar with this. So I can span out using no endpoint to search the entire graph, and if I encounter a closed node I know that I just found an enclosed region, but how can I know if the route I've found is the optimal one? I guess I could flag that to run a separate check for the found closed node to the previous node ignoring that one edge. This could work, but wouldn't be much better performance wise on dense graphs. Can anyone else suggest a better method? Thanks for taking the time to read this.

  Read the article

• Circular database relationships. Good, Bad, Exceptions?

  - by jim

  I have been putting off developing this part of my app for sometime purely because I want to do this in a circular way but get the feeling its a bad idea from what I remember my lecturers telling me back in school. I have a design for an order system, ignoring the everything that doesn't pertain to this example I'm left with: CreditCard Customer Order I want it so that, Customers can have credit cards (0-n) Customers have orders (1-n) Orders have one customer(1-1) Orders have one credit card(1-1) Credit cards can have one customer(1-1) (unique ids so we can ignore uniqueness of cc number, husband/wife may share cc instances ect) Basically the last part is where the issue shows up, sometimes credit cards are declined and they wish to use a different one, this needs to update which their 'current' card is but this can only change the current card used for that order, not the other orders the customer may have on disk. Effectively this creates a circular design between the three tables. Possible solutions: Either Create the circular design, give references: cc ref to order, customer ref to cc customer ref to order or customer ref to cc customer ref to order create new table that references all three table ids and put unique on the order so that only one cc may be current to that order at any time Essentially both model the same design but translate differently, I am liking the latter option best at this point in time because it seems less circular and more central. (If that even makes sense) My questions are, What if any are the pros and cons of each? What is the pitfalls of circular relationships/dependancies? Is this a valid exception to the rule? Is there any reason I should pick the former over the latter? Thanks and let me know if there is anything you need clarified/explained. --Update/Edit-- I have noticed an error in the requirements I stated. Basically dropped the ball when trying to simplify things for SO. There is another table there for Payments which adds another layer. The catch, Orders can have multiple payments, with the possibility of using different credit cards. (if you really want to know even other forms of payment). Stating this here because I think the underlying issue is still the same and this only really adds another layer of complexity.

  Read the article

• How do I write object classes effectively when dealing with table joins?

  - by Chris

  I should start by saying I'm not now, nor do I have any delusions I'll ever be a professional programmer so most of my skills have been learned from experience very much as a hobby. I learned PHP as it seemed a good simple introduction in certain areas and it allowed me to design simple web applications. When I learned about objects, classes etc the tutor's basic examnples covered the idea that as a rule of thumb each database table should have its own class. While that worked well for the photo gallery project we wrote, as it had very simple mysql queries, it's not working so well now my projects are getting more complex. If I require data from two separate tables which require a table join I've instead been ignoring the class altogether and handling it on a case by case basis, OR, even worse been combining some of the data into the class and the rest as a separate entity and doing two queries, which to me seems inefficient. As an example, when viewing content on a forum I wrote, if you view a thread, I retrieve data from the threads table, the posts table and the user table. The queries from the user and posts table are retrieved via a join and not instantiated as an object, whereas the thread data is called using my Threads class. So how do I get from my current state of affairs to something a little less 'stupid', for want of a better word. Right now I have a DB class that deals with connection and escaping values etc, a parent db query class that deals with the common queries and methods, and all of the other classes (Thread, Upload, Session, Photo and ones thats aren't used Post, User etc ) are children of that. Do I make a big posts class that has the relevant extra attributes that I retrieve from the users (and potentially threads) table? Do I have separate classes that populate each of their relevant attributes with a single query? If so how do I do that? Because of the way my classes are written, based on what I was taught, my db update row method, or insert method both just take the attributes as an array and update all of that, if I have extra attributes from other db tables in each class then how do I rewrite those methods as obbiously updating automatically like that would result in errors? In short I think my understanding is limited right now and I'd like some pointers when it comes to the fundamentals of how to write more complex classes.

  Read the article

• JPanels, JFrames, and Windows, Oh my!

  - by Jonathan

  Simply stated, I am trying to make a game I am working on full-screen. I have the following code I am trying to use: GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment(); GraphicsDevice gs = ge.getDefaultScreenDevice(); if(!gs.isFullScreenSupported()) { System.out.println("full-screen not supported"); } Frame frame = new Frame(gs.getDefaultConfiguration()); Window win = new Window(frame); try { // Enter full-screen mode gs.setFullScreenWindow(win); win.validate(); } Problem with this is that I am working within a class that extends JPanel, and while I have a variable of type Frame, I have none of type Window within the class. My understanding of JPanel is that it is a Window of sorts, but I cannot pass 'this' into gs.setFullScreenWindow(Window win)... How should I go about doing this? Is there any easy way of calling that, or a similar method, using a JPanel? Is there a way I can get something of type Window from my JPanel? - EDIT: The following method changes the state of JFrame and is called every 10ms: public void paintScreen() { Graphics g; try{ g = this.getGraphics(); //get Panel's graphic context if(g == null) { frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setExtendedState(frame.getExtendedState()|JFrame.MAXIMIZED_BOTH); frame.add(this); frame.pack(); frame.setResizable(false); frame.setTitle("Game Window"); frame.setVisible(true); } if((g != null) && (dbImage != null)) { g.drawImage(dbImage, 0, 0, null); } Toolkit.getDefaultToolkit().sync(); //sync the display on some systems g.dispose(); } catch (Exception e) { if(blockError) { blockError = false; } else { System.out.println("Graphics context error: " + e); } } } I anticipate that there may be a few redundancies or unnecessary calls after the if(g==null) statement (all the frame.somethingOrOther()s), any cleanup advice would be appreciated... Also, the block error is what it seems. I am ignoring an error. The error only occurs once, and this works fine when setup to ignore the first instance of the error... For anyone interested I can post additional info there if anyone wants to see if that block can be removed, but i'm not concerned... I might look into it later.

  Read the article

• How to add Items to GridView in C# Windows Store App (Win8)

  - by flexage

  To keep things simple let's just say I have a c# Windows Store Project for Windows 8 that has the following items: GridView (PlatformsGrid) List«PlatformSearchResult» (allPlatforms) DataTemplate (PlatformDataTemplate) in standardstyles.xaml allPlatforms is a collection of "PlatformSearchResult"objects populated from an online API, and has the following 3 properties: ID Name Alias I am able to add a new item to the gridview for each object that exists in my allPlatforms collection, however the items are blank and do not show the data from my objects. A quick summary of the current code looks like this: XAML Markup: <!-- Platforms Content --> <GridView x:Name="PlatformsGrid" Grid.Row="1" CanReorderItems="True" CanDragItems="True" ItemTemplate="{StaticResource PlatformDataTemplate}" > <GridView.ItemsPanel> <ItemsPanelTemplate> <WrapGrid MaximumRowsOrColumns="2" VerticalChildrenAlignment="Top" HorizontalChildrenAlignment="Center" /> </ItemsPanelTemplate> </GridView.ItemsPanel> </GridView> Data Template <!-- Platform Item Template --> <DataTemplate x:Key="PlatformDataTemplate"> <Grid Background="#FF939598" Height="250" Width="250"> <Image Source="/SampleImage.png" Stretch="UniformToFill"/> <StackPanel Orientation="Vertical" Background="#CC000000" Height="90" VerticalAlignment="Bottom"> <TextBlock Text="{Binding Name}" Margin="10,3,0,0" Width="242" Height="62" TextTrimming="WordEllipsis" TextWrapping="Wrap" HorizontalAlignment="Left"/> <TextBlock Text="{Binding Alias}" Margin="10,2,0,0" Width="186" Height="14" TextTrimming="WordEllipsis" HorizontalAlignment="Left" FontSize="9" Opacity="0.49"/> </StackPanel> </Grid> </DataTemplate> Controlling Function private async void FetchItemInfo_Loaded(object sender, RoutedEventArgs e) { // Get List of Top Games List<PlatformSearchResult> allPlatforms = new List<PlatformSearchResult>(); allPlatforms = await GamesDB.GetPlatforms(); // Dynamically Create Platform Tiles foreach (PlatformSearchResult platform in allPlatforms) { PlatformsGrid.DataContext = platform; PlatformsGrid.Items.Add(platform); } } How do I get the added items to show the appropriate object properties (ignoring the image for now), I'm just interested in populating the content of the TextBlocks. I appreciate any help anyone can provide! Thanks, Alex.

  Read the article

• Big O Complexity of a method

  - by timeNomad

  I have this method: public static int what(String str, char start, char end) { int count=0; for(int i=0;i<str.length(); i++) { if(str.charAt(i) == start) { for(int j=i+1;j<str.length(); j++) { if(str.charAt(j) == end) count++; } } } return count; } What I need to find is: 1) What is it doing? Answer: counting the total number of end occurrences after EACH (or is it? Not specified in the assignment, point 3 depends on this) start. 2) What is its complexity? Answer: the first loops iterates over the string completely, so it's at least O(n), the second loop executes only if start char is found and even then partially (index at which start was found + 1). Although, big O is all about worst case no? So in the worst case, start is the 1st char & the inner iteration iterates over the string n-1 times, the -1 is a constant so it's n. But, the inner loop won't be executed every outer iteration pass, statistically, but since big O is about worst case, is it correct to say the complexity of it is O(n^2)? Ignoring any constants and the fact that in 99.99% of times the inner loop won't execute every outer loop pass. 3) Rewrite it so that complexity is lower. What I'm not sure of is whether start occurs at most once or more, if once at most, then method can be rewritten using one loop (having a flag indicating whether start has been encountered and from there on incrementing count at each end occurrence), yielding a complexity of O(n). In case though, that start can appear multiple times, which most likely it is, because assignment is of a Java course and I don't think they would make such ambiguity. Solving, in this case, is not possible using one loop... WAIT! Yes it is..! Just have a variable, say, inc to be incremented each time start is encountered & used to increment count each time end is encountered after the 1st start was found: inc = 0, count = 0 if (current char == start) inc++ if (inc > 0 && current char == end) count += inc This would also yield a complexity of O(n)? Because there is only 1 loop. Yes I realize I wrote a lot hehe, but what I also realized is that I understand a lot better by forming my thoughts into words...

  Read the article

• WDS 2008 R2 DHCP Error

  - by scampbell

  Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

  Read the article

• Why do two patterns (/.*) and (.*) match different strings? @per-directory (.htaccess) mod_rewrite RewriteRule

  - by Leftium

  Shouldn't the two patterns (/.*) and (.*) match the same string? My real question is actually: where did the "abc" go? Something funky seems to be happening inside the mod_rewrite engine... Given this .htaccess file in www/dir/: Options +FollowSymlinks RewriteEngine on RewriteRule (/.*) print_url_args.php?result=$1 A request for http://localhost/dir/abc/123/ results in: result ($1) = "/123/" $_REQUEST_URI = "/dir/abc/123/" If the / is removed from the pattern like RewriteRule (.*) print_url_args.php?result=$1 The same request for http://localhost/dir/abc/123/ results in: result ($1) = "print_url_args.php" $_REQUEST_URI = "/dir/abc/123/" update: posted rewrite log. 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] add path info postfix: C:/db/www/dir/abc - C:/db/www/dir/abc/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/abc/123/ - abc/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] applying pattern '(/.*)$' to uri 'abc/123/' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (2) [perdir C:/db/www/dir/] rewrite 'abc/123/' - 'print_url_args.php?result=/123/' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) split uri=print_url_args.php?result=/123/ - uri=print_url_args.php, args=result=/123/ 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (2) [perdir C:/db/www/dir/] strip document_root prefix: C:/db/www/dir/print_url_args.php - /dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#23cd4a8/initial] (1) [perdir C:/db/www/dir/] internal redirect with /dir/print_url_args.php [INTERNAL REDIRECT] 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/print_url_args.php - print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (3) [perdir C:/db/www/dir/] applying pattern '(/.*)$' to uri 'print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:21:51 +0900] [localhost/sid#1333140][rid#43833c8/initial/redir#1] (1) [perdir C:/db/www/dir/] pass through C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] add path info postfix: C:/db/www/dir/abc - C:/db/www/dir/abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/abc/123/ - abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] applying pattern '(.*)$' to uri 'abc/123/' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (2) [perdir C:/db/www/dir/] rewrite 'abc/123/' - 'print_url_args.php?result=abc/123/' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) split uri=print_url_args.php?result=abc/123/ - uri=print_url_args.php, args=result=abc/123/ 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (2) [perdir C:/db/www/dir/] strip document_root prefix: C:/db/www/dir/print_url_args.php - /dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23bf470/initial] (1) [perdir C:/db/www/dir/] internal redirect with /dir/print_url_args.php [INTERNAL REDIRECT] 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] strip per-dir prefix: C:/db/www/dir/print_url_args.php - print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] applying pattern '(.*)$' to uri 'print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (2) [perdir C:/db/www/dir/] rewrite 'print_url_args.php' - 'print_url_args.php?result=print_url_args.php' 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) split uri=print_url_args.php?result=print_url_args.php - uri=print_url_args.php, args=result=print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (3) [perdir C:/db/www/dir/] add per-dir prefix: print_url_args.php - C:/db/www/dir/print_url_args.php 127.0.0.1 - - [15/Feb/2011:14:24:54 +0900] [localhost/sid#1333140][rid#23fda10/initial/redir#1] (1) [perdir C:/db/www/dir/] initial URL equal rewritten URL: C:/db/www/dir/print_url_args.php [IGNORING REWRITE]

  Read the article

• RAID and Partitions, guidance Needed

  - by beauregarde

  Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38  | Next Page >