content script - Page 340

Sonicwall VPN, Domain Controller Issues

- by durilai

I am trying to get the domain logon script to execute when I connect to VPN. I have a SonicWall 4060PRO, with the SonicOS Enhanced 4.2.0.0-10e. The VPN connects successfully, but the script does not execute. I am posting the log below, but I see two issues. The first is the inability to connect to domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. The second is the failure of the script. 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found.. I assume the second issue is caused because of the first, also on the second issue it seems to be trying to get the logon script from my local PC, not the server. Finally, the DC can be pinged and reached by its computer name once the VPN is connected. The shares that the script is tring to map can be mapped manually. Any help is appreciated. 2009/12/18 19:49:31:063 Information The connection "GroupVPN_0006B1030980" has been enabled. 2009/12/18 19:49:32:223 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX XAuth has requested a username but one has not yet been specified. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Sending phase 1 delete. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX User authentication information is needed to complete the connection. 2009/12/18 19:49:32:393 Information An incoming ISAKMP packet from XXX.XXX.XXX.XXX was ignored. 2009/12/18 19:49:36:962 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:37:094 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:37:100 Information XXX.XXX.XXX.XXX Sending XAuth reply. 2009/12/18 19:49:37:110 Information XXX.XXX.XXX.XXX Received initial contact notify. 2009/12/18 19:49:37:153 Information XXX.XXX.XXX.XXX Received XAuth status. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX Sending XAuth acknowledgement. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX User authentication has succeeded. 2009/12/18 19:49:37:247 Information XXX.XXX.XXX.XXX Received request for policy version. 2009/12/18 19:49:37:253 Information XXX.XXX.XXX.XXX Sending policy version reply. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Received policy change is not required. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Sending policy acknowledgement. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX The configuration for the connection is up to date. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 2 negotiation with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting quick mode phase 2 exchange. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX The SA lifetime for phase 2 is 28800 seconds. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX Phase 2 with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP has completed. 2009/12/18 19:49:37:896 Information Renewing IP address for the virtual interface (00-60-73-4C-3F-45). 2009/12/18 19:49:40:189 Information The virtual interface has been added to the system with IP address 10.10.10.112. 2009/12/18 19:49:40:319 Information The system ARP cache has been flushed. 2009/12/18 19:49:40:576 Information XXX.XXX.XXX.XXX NetWkstaUserGetInfo returned: user: Dustin, logon domain: DT-WIN7, logon server: DT-WIN7 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX calling NetUserGetInfo: Server: , User: Dustin, level: 3 2009/12/18 19:49:53:460 Information XXX.XXX.XXX.XXX NetUserGetInfo returned: home dir: , remote dir: , logon script: 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found..

Read the article

Making Sense of ASP.NET Paths

- by Rick Strahl

ASP.Net includes quite a plethora of properties to retrieve path information about the current request, control and application. There's a ton of information available about paths on the Request object, some of it appearing to overlap and some of it buried several levels down, and it can be confusing to find just the right path that you are looking for. To keep things straight I thought it a good idea to summarize the path options along with descriptions and example paths. I wrote a post about this a long time ago in 2004 and I find myself frequently going back to that page to quickly figure out which path I’m looking for in processing the current URL. Apparently a lot of people must be doing the same, because the original post is the second most visited even to this date on this blog to the tune of nearly 500 hits per day. So, I decided to update and expand a bit on the original post with a little more information and clarification based on the original comments. Request Object Paths Available Here's a list of the Path related properties on the Request object (and the Page object). Assume a path like http://www.west-wind.com/webstore/admin/paths.aspx for the paths below where webstore is the name of the virtual. .blackborder td { border-bottom: solid 1px silver; border-left: solid 1px silver; } Request Property Description and Value ApplicationPath Returns the web root-relative logical path to the virtual root of this app. /webstore/ PhysicalApplicationPath Returns local file system path of the virtual root for this app. c:\inetpub\wwwroot\webstore PhysicalPath Returns the local file system path to the current script or path. c:\inetpub\wwwroot\webstore\admin\paths.aspx Path FilePath CurrentExecutionFilePath All of these return the full root relative logical path to the script page including path and scriptname. CurrentExcecutionFilePath will return the ‘current’ request path after a Transfer/Execute call while FilePath will always return the original request’s path. /webstore/admin/paths.aspx AppRelativeCurrentExecutionFilePath Returns an ASP.NET root relative virtual path to the script or path for the current request. If in a Transfer/Execute call the transferred Path is returned. ~/admin/paths.aspx PathInfo Returns any extra path following the script name. If no extra path is provided returns the root-relative path (returns text in red below). string.Empty if no PathInfo is available. /webstore/admin/paths.aspx/ExtraPathInfo RawUrl Returns the full root relative URL including querystring and extra path as a string. /webstore/admin/paths.aspx?sku=wwhelp40 Url Returns a fully qualified URL including querystring and extra path. Note this is a Uri instance rather than string. http://www.west-wind.com/webstore/admin/paths.aspx?sku=wwhelp40 UrlReferrer The fully qualified URL of the page that sent the request. This is also a Uri instance and this value is null if the page was directly accessed by typing into the address bar or using an HttpClient based Referrer client Http header. http://www.west-wind.com/webstore/default.aspx?Info Control.TemplateSourceDirectory Returns the logical path to the folder of the page, master or user control on which it is called. This is useful if you need to know the path only to a Page or control from within the control. For non-file controls this returns the Page path. /webstore/admin/ As you can see there’s a ton of information available there for each of the three common path formats: Physical Path is an OS type path that points to a path or file on disk. Logical Path is a Web path that is relative to the Web server’s root. It includes the virtual plus the application relative path. ~/ (Root-relative) Path is an ASP.NET specific path that includes ~/ to indicate the virtual root Web path. ASP.NET can convert virtual paths into either logical paths using Control.ResolveUrl(), or physical paths using Server.MapPath(). Root relative paths are useful for specifying portable URLs that don’t rely on relative directory structures and very useful from within control or component code. You should be able to get any necessary format from ASP.NET from just about any path or script using these mechanisms. ~/ Root Relative Paths and ResolveUrl() and ResolveClientUrl() ASP.NET supports root-relative virtual path syntax in most of its URL properties in Web Forms. So you can easily specify a root relative path in a control rather than a location relative path: <asp:Image runat="server" ID="imgHelp" ImageUrl="~/images/help.gif" /> ASP.NET internally resolves this URL by using ResolveUrl("~/images/help.gif") to arrive at the root-relative URL of /webstore/images/help.gif which uses the Request.ApplicationPath as the basepath to replace the ~. By convention any custom Web controls also should use ResolveUrl() on URL properties to provide the same functionality. In your own code you can use Page.ResolveUrl() or Control.ResolveUrl() to accomplish the same thing: string imgPath = this.ResolveUrl("~/images/help.gif"); imgHelp.ImageUrl = imgPath; Unfortunately ResolveUrl() is limited to WebForm pages, so if you’re in an HttpHandler or Module it’s not available. ASP.NET Mvc also has it’s own more generic version of ResolveUrl in Url.Decode: <script src="<%= Url.Content("~/scripts/new.js") %>" type="text/javascript"></script> which is part of the UrlHelper class. In ASP.NET MVC the above sort of syntax is actually even more crucial than in WebForms due to the fact that views are not referencing specific pages but rather are often path based which can lead to various variations on how a particular view is referenced. In a Module or Handler code Control.ResolveUrl() unfortunately is not available which in retrospect seems like an odd design choice – URL resolution really should happen on a Request basis not as part of the Page framework. Luckily you can also rely on the static VirtualPathUtility class: string path = VirtualPathUtility.ToAbsolute("~/admin/paths.aspx"); VirtualPathUtility also many other quite useful methods for dealing with paths and converting between the various kinds of paths supported. One thing to watch out for is that ToAbsolute() will throw an exception if a query string is provided and doesn’t work on fully qualified URLs. I wrote about this topic with a custom solution that works fully qualified URLs and query strings here (check comments for some interesting discussions too). Similar to ResolveUrl() is ResolveClientUrl() which creates a fully qualified HTTP path that includes the protocol and domain name. It’s rare that this full resolution is needed but can be useful in some scenarios. Mapping Virtual Paths to Physical Paths with Server.MapPath() If you need to map root relative or current folder relative URLs to physical URLs or you can use HttpContext.Current.Server.MapPath(). Inside of a Page you can do the following: string physicalPath = Server.MapPath("~/scripts/ww.jquery.js")); MapPath is pretty flexible and it understands both ASP.NET style virtual paths as well as plain relative paths, so the following also works. string physicalPath = Server.MapPath("scripts/silverlight.js"); as well as dot relative syntax: string physicalPath = Server.MapPath("../scripts/jquery.js"); Once you have the physical path you can perform standard System.IO Path and File operations on the file. Remember with physical paths and IO or copy operations you need to make sure you have permissions to access files and folders based on the Web server user account that is active (NETWORK SERVICE, ASPNET typically). Note the Server.MapPath will not map up beyond the virtual root of the application for security reasons. Server and Host Information Between these settings you can get all the information you may need to figure out where you are at and to build new Url if necessary. If you need to build a URL completely from scratch you can get access to information about the server you are accessing: Server Variable Function and Example SERVER_NAME The of the domain or IP Address wwww.west-wind.com or 127.0.0.1 SERVER_PORT The port that the request runs under. 80 SERVER_PORT_SECURE Determines whether https: was used. 0 or 1 APPL_MD_PATH ADSI DirectoryServices path to the virtual root directory. Note that LM typically doesn’t work for ADSI access so you should replace that with LOCALHOST or the machine’s NetBios name. /LM/W3SVC/1/ROOT/webstore Request.Url and Uri Parsing If you still need more control over the current request URL or you need to create new URLs from an existing one, the current Request.Url Uri property offers a lot of control. Using the Uri class and UriBuilder makes it easy to retrieve parts of a URL and create new URLs based on existing URL. The UriBuilder class is the preferred way to create URLs – much preferable over creating URIs via string concatenation. Uri Property Function Scheme The URL scheme or protocol prefix. http or https Port The port if specifically specified. DnsSafeHost The domain name or local host NetBios machine name www.west-wind.com or rasnote LocalPath The full path of the URL including script name and extra PathInfo. /webstore/admin/paths.aspx Query The query string if any ?id=1 The Uri class itself is great for retrieving Uri parts, but most of the properties are read only if you need to modify a URL in order to change it you can use the UriBuilder class to load up an existing URL and modify it to create a new one. Here are a few common operations I’ve needed to do to get specific URLs: Convert the Request URL to an SSL/HTTPS link For example to take the current request URL and converted it to a secure URL can be done like this: UriBuilder build = new UriBuilder(Request.Url); build.Scheme = "https"; build.Port = -1; // don't inject port Uri newUri = build.Uri; string newUrl = build.ToString(); Retrieve the fully qualified URL without a QueryString AFAIK, there’s no native routine to retrieve the current request URL without the query string. It’s easy to do with UriBuilder however: UriBuilder builder = newUriBuilder(Request.Url); builder.Query = ""; stringlogicalPathWithoutQuery = builder.ToString(); What else? I took a look through the old post’s comments and addressed as many of the questions and comments that came up in there. With a few small and silly exceptions this update post handles most of these. But I’m sure there are a more things that go in here. What else would be useful to put onto this post so it serves as a nice all in one place to go for path references? If you think of something leave a comment and I’ll try to update the post with it in the future.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

Programmatically add an ISAPI extension dll in IIS 7 using ADSI?

- by fretje

I apologize beforehand, this is a cross post of this SO question. I thought I'd ask it there first, but apparently it doesn't harvest any answers there. I hope it will get more attention here. When I have an answer somewhere, I'll delete the other one. I'm trying to programmatically add an ISAPI extension dll in IIS using ADSI. This has been working for ages on previous versions of IIS, but it seems to fail on IIS 7. I am using similar code like shown in this question: var web = GetObject("IIS://localhost/W3SVC/1/ROOT/specificVirtualDirectory"); var maps = web.ScriptMaps.toArray(); map[maps.length] = ".aaa,c:\\path\\to\\isapi\\extension.dll,1,GET,POST"; web.ScriptMaps = maps.asDictionary(); web.SetInfo(); After executing that code, I do see an "AboMapperCustom-12345678" entry for that specific dll in the "Handler mappings" of the specific virtual directory in which I added the script map. But when I try to use that extension in a browser, I always get HTTP Error 404.2 Not Found The page you are requesting cannot be served because of the ISAPI and CGI Restriction list settings on the Web server. Even after adding an entry to allow that specific dll in the "ISAPI and CGI restrictions", I keep getting that error. To make it actually work, I first have to undo these steps (encountering the same issue like the OP of the question mentioned above: after deleting the script map entry from the IIS manager GUI, I also have to programmatically delete it using ADSI before it's actually gone from the metabase). And then manually add an entry like this: inetmgr - webserver - website - virtual directory - handler mappings - add script map... path = *.dll, executable = <path to dll>, name = <doesn't matter, but it's mandatory> click "yes" on the question "do you want to allow this ISAPI extension?" When I compare the 2 entries, they are exactly the same, except for the "Entry Type" which seems to be "Inherited" for the programmatically added one and "Local" for the one added manually. The strange thing is, even though it says "Inherited", I don't see it anywhere in IIS on a higher level. Where is it inheriting from? In my code, I do add the script map to the specific virtual directory so it should be "Local" as well. Maybe there is the problem, but I don't know how to add a "Local" Script Map using ADSI. I really would like to keep using the ADSI method, as otherwise I will have to use different methods in our setup when working with IIS 7 or previous versions, and I would like to avoid that. To recap: How can I programmatically add a script map entry and its companion CGI and ISAPI restrictions entry to IIS 7 using ADSI? Anybody who can shed some light on this? Any help appreciated.

Read the article

Google Reader Play – Reading redefined

- by samsudeen

“Google Reader Play” is the new Web browsing feature launched by Google on Wednesday which allows users to browse and explore the content in Google reader like a TV rather than the hierarchical tree view. Google reader finds and displays the coolest things on the net using the same “Recommended Items” feature in the Google Reader. if you are a Google user then it tries to filter the content based upon the “Items that several of your friends have shared” and “based upon your past reader History” “Google Reader Play” makes the personalization of content automation by allowing the users to mark , like and share items as shown below It also allows you to personalize the content by choosing the from the list of available categories The interface looks simple and and now users can feel reading news is like watching TV.This is what what Google is saying about it In Google Reader Play, items are presented one at a time, and each item is big and full-screen. After you’ve read an item, just click the next arrow to move to the next one, or click any item on the filmstrip below to fast-forward. Join us on Facebook to read all our stories right inside your Facebook news feed.

Read the article

Task Scheduler not running .bat or .vbs successfully

- by Django Reinhardt

Hi there, got this weird problem, which will hopefully have an obvious solution for some enlightened soul: We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs script stopped successfully executing... but oddly it worked fine when ran manually! The error given in these circumstances was always "Timeout". We thought we try a little creative thinking, and run the .vbs another way: Via a .bat file. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file is nothing more than... CScript "C:\location\script.vbs" > Log.txt But the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The log.txt file says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

Read the article

HTML5 Form Validation

- by Stephen.Walther

The latest versions of Google Chrome (16+), Mozilla Firefox (8+), and Internet Explorer (10+) all support HTML5 client-side validation. It is time to take HTML5 validation seriously. The purpose of the blog post is to describe how you can take advantage of HTML5 client-side validation regardless of the type of application that you are building. You learn how to use the HTML5 validation attributes, how to perform custom validation using the JavaScript validation constraint API, and how to simulate HTML5 validation on older browsers by taking advantage of a jQuery plugin. Finally, we discuss the security issues related to using client-side validation. Using Client-Side Validation Attributes The HTML5 specification discusses several attributes which you can use with INPUT elements to perform client-side validation including the required, pattern, min, max, step, and maxlength attributes. For example, you use the required attribute to require a user to enter a value for an INPUT element. The following form demonstrates how you can make the firstName and lastName form fields required: <!DOCTYPE html> <html > <head> <title>Required Demo</title> </head> <body> <form> <label> First Name: <input required title="First Name is Required!" /> </label> <label> Last Name: <input required title="Last Name is Required!" /> </label> <button>Register</button> </form> </body> </html> If you attempt to submit this form without entering a value for firstName or lastName then you get the validation error message: Notice that the value of the title attribute is used to display the validation error message “First Name is Required!”. The title attribute does not work this way with the current version of Firefox. If you want to display a custom validation error message with Firefox then you need to include an x-moz-errormessage attribute like this: <input required title="First Name is Required!" x-moz-errormessage="First Name is Required!" /> The pattern attribute enables you to validate the value of an INPUT element against a regular expression. For example, the following form includes a social security number field which includes a pattern attribute: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Pattern</title> </head> <body> <form> <label> Social Security Number: <input required pattern="^d{3}-d{2}-d{4}$" title="###-##-####" /> </label> <button>Register</button> </form> </body> </html> The regular expression in the form above requires the social security number to match the pattern ###-##-####: Notice that the input field includes both a pattern and a required validation attribute. If you don’t enter a value then the regular expression is never triggered. You need to include the required attribute to force a user to enter a value and cause the value to be validated against the regular expression. Custom Validation You can take advantage of the HTML5 constraint validation API to perform custom validation. You can perform any custom validation that you need. The only requirement is that you write a JavaScript function. For example, when booking a hotel room, you might want to validate that the Arrival Date is in the future instead of the past: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Constraint Validation API</title> </head> <body> <form> <label> Arrival Date: <input id="arrivalDate" type="date" required /> </label> <button>Submit Reservation</button> </form> <script type="text/javascript"> var arrivalDate = document.getElementById("arrivalDate"); arrivalDate.addEventListener("input", function() { var value = new Date(arrivalDate.value); if (value < new Date()) { arrivalDate.setCustomValidity("Arrival date must be after now!"); } else { arrivalDate.setCustomValidity(""); } }); </script> </body> </html> The form above contains an input field named arrivalDate. Entering a value into the arrivalDate field triggers the input event. The JavaScript code adds an event listener for the input event and checks whether the date entered is greater than the current date. If validation fails then the validation error message “Arrival date must be after now!” is assigned to the arrivalDate input field by calling the setCustomValidity() method of the validation constraint API. Otherwise, the validation error message is cleared by calling setCustomValidity() with an empty string. HTML5 Validation and Older Browsers But what about older browsers? For example, what about Apple Safari and versions of Microsoft Internet Explorer older than Internet Explorer 10? What the world really needs is a jQuery plugin which provides backwards compatibility for the HTML5 validation attributes. If a browser supports the HTML5 validation attributes then the plugin would do nothing. Otherwise, the plugin would add support for the attributes. Unfortunately, as far as I know, this plugin does not exist. I have not been able to find any plugin which supports both the required and pattern attributes for older browsers, but does not get in the way of these attributes in the case of newer browsers. There are several jQuery plugins which provide partial support for the HTML5 validation attributes including: · jQuery Validation — http://docs.jquery.com/Plugins/Validation · html5Form — http://www.matiasmancini.com.ar/jquery-plugin-ajax-form-validation-html5.html · h5Validate — http://ericleads.com/h5validate/ The jQuery Validation plugin – the most popular JavaScript validation library – supports the HTML5 required attribute, but it does not support the HTML5 pattern attribute. Likewise, the html5Form plugin does not support the pattern attribute. The h5Validate plugin provides the best support for the HTML5 validation attributes. The following page illustrates how this plugin supports both the required and pattern attributes: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>h5Validate</title> <style type="text/css"> .validationError { border: solid 2px red; } .validationValid { border: solid 2px green; } </style> </head> <body> <form id="customerForm"> <label> First Name: <input id="firstName" required /> </label> <label> Social Security Number: <input id="ssn" required pattern="^d{3}-d{2}-d{4}$" title="Expected pattern is ###-##-####" /> </label> <input type="submit" /> </form> <script type="text/javascript" src="Scripts/jquery-1.4.4.min.js"></script> <script type="text/javascript" src="Scripts/jquery.h5validate.js"></script> <script type="text/javascript"> // Enable h5Validate plugin $("#customerForm").h5Validate({ errorClass: "validationError", validClass: "validationValid" }); // Prevent form submission when errors $("#customerForm").submit(function (evt) { if ($("#customerForm").h5Validate("allValid") === false) { evt.preventDefault(); } }); </script> </body> </html> When an input field fails validation, the validationError CSS class is applied to the field and the field appears with a red border. When an input field passes validation, the validationValid CSS class is applied to the field and the field appears with a green border. From the perspective of HTML5 validation, the h5Validate plugin is the best of the plugins. It adds support for the required and pattern attributes to browsers which do not natively support these attributes such as IE9. However, this plugin does not include everything in my wish list for a perfect HTML5 validation plugin. Here’s my wish list for the perfect back compat HTML5 validation plugin: 1. The plugin would disable itself when used with a browser which natively supports HTML5 validation attributes. The plugin should not be too greedy – it should not handle validation when a browser could do the work itself. 2. The plugin should simulate the same user interface for displaying validation error messages as the user interface displayed by browsers which natively support HTML5 validation. Chrome, Firefox, and Internet Explorer all display validation errors in a popup. The perfect plugin would also display a popup. 3. Finally, the plugin would add support for the setCustomValidity() method and the other methods of the HTML5 validation constraint API. That way, you could implement custom validation in a standards compatible way and you would know that it worked across all browsers both old and new. Security It would be irresponsible of me to end this blog post without mentioning the issue of security. It is important to remember that any client-side validation — including HTML5 validation — can be bypassed. You should use client-side validation with the intention to create a better user experience. Client validation is great for providing a user with immediate feedback when the user is in the process of completing a form. However, client-side validation cannot prevent an evil hacker from submitting unexpected form data to your web server. You should always enforce your validation rules on the server. The only way to ensure that a required field has a value is to verify that the required field has a value on the server. The HTML5 required attribute does not guarantee anything. Summary The goal of this blog post was to describe the support for validation contained in the HTML5 standard. You learned how to use both the required and the pattern attributes in an HTML5 form. We also discussed how you can implement custom validation by taking advantage of the setCustomValidity() method. Finally, I discussed the available jQuery plugins for adding support for the HTM5 validation attributes to older browsers. Unfortunately, I am unaware of any jQuery plugin which provides a perfect solution to the problem of backwards compatibility.

Read the article

No Preview Images in File Open Dialogs on Windows 7

- by Rick Strahl

I’ve been updating some file uploader code in my photoalbum today and while I was working with the uploader I noticed that the File Open dialog using Silverlight that handles the file selections didn’t allow me to ever see an image preview for image files. It sure would be nice if I could preview the images I’m about to upload before selecting them from a list. Here’s what my list looked like: This is the Medium Icon view, but regardless of the views available including Content view only icons are showing up. Silverlight uses the standard Windows File Open Dialog so it uses all the same settings that apply to Explorer when displaying content. It turns out that the Customization options in particular are the problem here. Specifically the Always show icons, never thumbnails option: I had this option checked initially, because it’s one of the defenses against runaway random Explorer views that never stay set at my preferences. Alas, while this setting affects Explorer views apparently it also affects all dialog based views in the same way. Unchecking the option above brings back full thumbnailing for all content and icon views. Here’s the same Medium Icon view after turning the option off: which obviously works a whole lot better for selection of images. The bummer of this is that it’s not controllable at the dialog level – at least not in Silverlight. Dialogs obviously have different requirements than what you see in Explorer so the global configuration is a bit extreme especially when there are no overrides on the dialog interface. Certainly for Silverlight the ability to have previews is a key feature for many applications since it will be dealing with lots of media content most likely. Hope this helps somebody out. Thanks to Tim Heuer who helped me track this down on Twitter.© Rick Strahl, West Wind Technologies, 2005-2010Posted in Silverlight Windows

Read the article

IIS7 returns 403.1 (execute access denied) for image file

- by Kristoffer

I have a web app running in IIS7 on Windows Server 2008. There is a virtual directory pointing to a shared folder "/Content/Data" on another machine (running Windows Server 2003), as well as a real directory "/Content/Images" on the local machine (web app sub folder). Accessing images in "/Content/Images" is no problem, but when an image (e.g. a JPEG file) in the "/Content/Data" is accessed by a browser, IIS returns this error: HTTP Error 403.1 - Forbidden: Execute access is denied. However, the web app can read and write to / from it. I assume IIS and ASP.NET are running under different user accounts? Does anyone have an idea on what I have to do to make it work? I have set the permissions on the shared folder to Everyone Full Control, with no luck.

Read the article

PostgreSQL service doesn't start on Windows 7

- by Mehrdad

(Not sure if this should be on Stack Overflow or Super User... please move if needed.) When I start the PostgreSQL service on Windows 7 x64, it immediately stops. When I check my log folder (C:\PostgreSQL\9.1\data\pg_log\), I see new but empty log files. The Event Viewer doesn't tell me anything other than the fact that the server did not respond. I've even tried turning off my firewall (I don't have any antivirus or anything else), but nothing helps. The setup works fine when I'm on Windows XP (32-bit) (same computer, different partition). I can't figure out what's wrong, even though I've tried tracing the system calls. Is PostgreSQL compatible with Windows 7 x64 at all? Any ideas what the issue might be? More info: This problem also happens at the end of installation -- the service starts, then stops immediately, before the installer can do anything. Installation log: Starting the database server... Executing cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\startserver.vbs" postgresql-x64-9.1 Script exit code: 0 Script output: Starting postgresql-x64-9.1 Service postgresql-x64-9.1 started successfully // <==== NOT REALLY!! It stops! startserver.vbs ran to completion Script stderr: Loading additional SQL modules... Executing cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\loadmodules.vbs" "postgres" "****" "C:\Program Files\PostgreSQL\9.1" "C:\Program Files\PostgreSQL\9.1\data" 5432 Script exit code: 2 Script output: Installing the adminpack module in the postgres database... Executing 'C:\Users\HOMEUS~1\AppData\Local\Temp\rad6C20D.bat'... psql: could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "localhost" (::1) and accepting TCP/IP connections on port 5432? could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "localhost" (127.0.0.1) and accepting TCP/IP connections on port 5432? Failed to install the 'adminpack' module in the 'postgres' database loadmodules.vbs ran to completion Script stderr: Program ended with an error exit code Error running cscript //NoLogo "C:\Program Files\PostgreSQL\9.1\installer\server\loadmodules.vbs" "postgres" "****" "C:\Program Files\PostgreSQL\9.1" "C:\Program Files\PostgreSQL\9.1\data" 5432 : Program ended with an error exit code

Read the article

Using Oracle Enterprise Manager Ops Center to Update Solaris via Live Upgrade

- by LeonShaner

Introduction: This Oracle Enterprise Manager Ops Center blog entry provides tips for using Ops Center to update Solaris using Live Upgrade on Solaris 10 and Boot Environments on Solaris 11. Why use Live Upgrade? Live Upgrade (LU) can significantly reduce downtime associated with patching Live Upgrade avoids dropping to single-user mode for long periods of time during patching Live Upgrade relies on an Alternate Boot Environment (ABE)/(BE), which is patched while in multi-user mode; thereby allowing normal system operations to continue with the active BE, while the alternate BE is being patched Activating an newly patched (A)BE is essentially a reboot; therefore the downtime is ~= reboot Admins can easily revert to the prior Boot Environment (BE) as a safeguard / fallback. Why use Ops Center to patch via Live Upgrade, Alternate Boot Environments, and Solaris 11 equivalents? All the benefits of Ops Center's extensive patch and package knowledge base can be leveraged on top of Live Upgrade Ops Center can orchestrate patching based on Live Upgrade and Solaris 11 features, which all works together to minimize downtime Ops Centers advanced inventory and reporting features assurance that each OS is updated to a verifiable, consistent standard, rather than relying on ad-hoc (error prone) procedures and scripts Ops Center gives admins control over the boot environment specifications or they can let Ops Center decide when a BE is necessary, thereby reducing complexity and lowering the opportunity for user error Preparing to use Live Upgrade-like features in Solaris 11 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Solaris 11 has features which are similar in concept to Live Upgrade on Solaris 10, but differ greatly in implementationImportant distinctions: Solaris 11 assumes ZFS root Solaris 11 adds Boot Environments (BE's) as an integrated feature (see beadm) Solaris 11 BE's avoid single-user patching (vs. Solaris 10 w/ ZFS snapshot=ABE). Solaris 11 Image Packaging System (IPS) has hooks for BE creation, as needed Solaris 11 allows pkgs to be installed + upgraded in alternate BE (e.g. instead of the live system) but it is controlled on a per-pkg basis Boot Environments are activated across a reboot; instead of spending long periods installing + upgrading packages in single user mode. Fallback to a prior BE is a function of the BE infrastructure (a la beadm). (Generally) Reboot + BE activation can be much much faster on Solaris 11 Preparing to use Live Upgrade on Solaris 10 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Live Upgrade Pre-requisite patches must be applied before the first Live Upgrade Alternate Boot Environments are created (see "Pre-requisite Patches" section, below...) Solaris 10 Update 6 or newer on ZFS root is the practical starting point for Live Upgrade Live Upgrade with ZFS root is far more straight-forward than any scheme based on Alternative Boot Environments in slices or temporarily breaking mirrors Use Solaris best practices to upgrade the OS to at least Solaris 10 Update 4 (outside of Ops Center) UFS root can (technically) be used, but it is significantly more involved (e.g. discouraged) -- there are many reasons to move to ZFS while going through the process to update to Solaris 10 Update 6 or newer (out side of Ops Center) Recommendation: Start with Solaris 10 Update 6 or newer on ZFS root Recommendation: Start with Ops Center 12c or newer Ops Center 12c can automatically create your ABE's for you, without the need for custom scripts Ops Center 12c Update 2 avoids kernel panic on unpatched Solaris 10 update 9 (and older) -- unrelated to Live Upgrade, but more on the issue, below. NOTE: There is no magic! If you have systems running Solaris 10 Update 5 or older on UFS root, and you don't know how to get them updated to Solaris 10 on ZFS root, then there are services available from Oracle Advanced Customer Support (ACS), which specialize in this area. Live Upgrade Pre-requisite Patches (Solaris 10) Certain Live Upgrade related patches must be present before the first Live Upgrade ABE's are created on Solaris 10.Use the following MOS Search String to find the “living document” that outlines the required patch minimums, which are necessary before using any Live Upgrade features: Solaris Live Upgrade Software Patch Requirements(Click above – the link is valid as of this writing, but search in MOS for the same "Solaris Live Upgrade Software Patch Requirements" string if necessary) It is a very good idea to check the document periodically and adapt to its contents, accordingly.IMPORTANT: In case it wasn't clear in the above document, some direct patching of the active OS, including a reboot, may be required before Live Upgrade can be successfully used the first time.HINT: You can use Ops Center to determine what to expect for a given system, and to schedule the “pre-patching” during a maintenance window if necessary. Preparing to use Ops Center Discover + Manage (Install + Configure the Ops Center agent in) each Global Zone Recommendation: Begin by using OCDoctor --agent-prereq to determine whether OS meets OC prerequisites (resolve any issues) See prior requirements and recommendations w.r.t. starting with Solaris 10 Update 6 or newer on ZFS (or at least Solaris 10 Update 4 on UFS, with caveats) WARNING: Systems running unpatched Solaris 10 update 9 (or older) should run the Ops Center 12c Update 2 agent to avoid a potential kernel panic The 12c Update 2 agent will check patch minimums and disable certain process accounting features if the kernel is not sufficiently patched to avoid the panic SPARC: 142900-05 Obsoleted by: 142900-06 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142901-05 Obsoleted by: 142901-06 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) OR SPARC: 142909-17 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142910-17 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) Ops Center 12c (initial release) and 12c Update 1 agent can also be safely used with a workaround (to be performed BEFORE installing the agent): # mkdir -p /etc/opt/sun/oc # echo "zstat_exacct_allowed=false" > /etc/opt/sun/oc/zstat.conf # chmod 755 /etc/opt/sun /etc/opt/sun/oc # chmod 644 /etc/opt/sun/oc/zstat.conf # chown -Rh root:sys /etc/opt/sun/oc NOTE: Remove the above after patching the OS sufficiently, or after upgrading to the 12c Update 2 agent Using Ops Center to apply Live Upgrade-related Pre-Patches (Solaris 10)Overview: Create an OS Update Profile containing the minimum LU-related pre-patches, based on the Solaris Live Upgrade Software Patch Requirements, previously mentioned. SIMULATE the deployment of the LU-related pre-patches Observe whether any of the LU-related pre-patches will require a reboot The job details for each Global Zone will advise whether a reboot step will be required ACTUALLY deploy the LU-related pre-patches, according to your change control process (e.g. if no reboot, maybe okay to do now; vs. must do later because of the reboot). You can schedule the job to occur later, during a maintenance window Check the job status for each node, resolving any issues found Once the LU-related pre-patches are applied, you can Ops Center to patch using Live Upgrade on Solaris 10 Using Ops Center to patch Solaris 10 with LU/ABE's -- the GOODS!(this is the heart of the tip): Create an OS Update Profile containing the patches that make up your standard build Use Solaris Baselines when possible Add other individual patches as needed ACTUALLY deploy the OS Update Profile Specify the appropriate Live Upgrade options, e.g. Synchronize the active BE to the alternate BE before patching Do not activate the BE after patching Check the job status for each node, resolving any issues found Activate the newly patched BE according to your change control process Activate = Reboot to the ABE, making the ABE the new active BE Ops Center does not separate LU activate from reboot, so expect a reboot! Check the job status for each node, resolving any issues found Examples (w/Screenshots) Solaris 10 and Live Upgrade: Auto-Create the Alternate Boot Environment (ZFS root only) ABE to be created on ZFS with name S10_12_07REC (Example) Uses built in feature to call “lucreate -n S10_12_07REC” behind scenes if not already present NOTE: Leave “lucreate” params blank (if you do specify options, the will be appended after -n $ABEName) Solaris 10 and Live Upgrade: Alternate Boot Environment Creation via Operational Profile (script) The Alternate Boot Environment is to be created via custom, user-supplied script, which does whatever is needed for the system where Live Upgrade will be used. Operational Profile, which provides the script to create an ABE: Very similar to the automatic case, but with a Script (Operational Profile), which is used to create the ABE Relies on user-supplied script in the form of an Operational Profile Could be used to prepare an ABE based on a UFS root in a slice, or on a separate device (e.g. by breaking a mirror first) – it is up to the script author to do the right thing! EXAMPLE: Same result as the ZFS case, but illustrating the Operational Profile (e.g. script) approach to call: # lucreate -n S10_1207REC NOTE: OC special variable is $ABEName Boot Environment Profile, which references the Operational Profile Script = Operational Profile on this screen Refers to Operational Profile shown in the previous section The user-supplied S10_Create_BE Operational Profile will be run The Operational Profile must send a non-zero exit code if there is a problem (so that the OS Update job will not proceed) Solaris 10 OS Update Profile (to provide the actual patch specifications) Solaris 10 Baseline “Recommended” chosen for “Install” Solaris 10 OS Update Plan (two-steps in this case) “Create a Boot Environment” + “Update OS” are chosen. Using Ops Center to patch Solaris 11 with Boot Environments (as needed) Create a Solaris 11 OS Update Profile containing the packages that make up your standard build ACTUALLY deploy the Solaris 11 OS Update Profile BE will be created if needed (or you can stipulate no BE) BE name will be auto-generated (if needed), or you may specify a BE name Check the job status for each node, resolving any issues found Check if a BE was created; if so, activate the new BE Activate = Reboot to the BE, making the new BE the active BE Ops Center does not separate BE activate from reboot NOTE: Not every Solaris 11 OS Update will require a new BE, so a reboot may not be necessary. Solaris 11: Auto BE Create (as Needed -- let Ops Center decide) BE to be created as needed BE to be named automatically Reboot (if necessary) deferred to separate step Solaris 11: OS Profile Solaris 11 “entire” chosen for a particular SRU Solaris 11: OS Update Plan (w/BE) “Create a Boot Environment” + “Update OS” are chosen. Summary: Solaris 10 Live Upgrade, Alternate Boot Environments, and their equivalents on Solaris 11 can be very powerful tools to help minimize the downtime associated with updating your servers. For very old Solaris, there are some important prerequisites to adhere to, but once the initial preparation is complete, Live Upgrade can be used going forward. For Solaris 11, the built-in Boot Environment handling is leveraged directly by the Image Packaging System, and the result is a much more straight forward way to patch, and far fewer prerequisites to satisfy in getting there. Ops Center simplifies using either approach, and helps you improve consistency from system to system, which ultimately helps you improve the overall up-time across all the Solaris systems in your environment. Please let us know what you think? Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager web page or follow us at : Twitter | Facebook | YouTube | Linkedin | Newsletter

Read the article

Incorporating Sound in UPK 3.6.1

- by [email protected]

UPK 3.6.1 now offers developers the ability to easily record and edit sound from right within the UPK Developer. Sound can be recorded in either the concept pane or individual topic frames. A developer can record sound at the same time they're capturing a transaction or by adding sound after recording, on a frame-by-frame basis. The sound editor in UPK 3.6.1 allows developers to perform a variety of editing functions: play, insert sound or silence, delete, adjust amplification, and import or export sound files, just to name a few. Internally, Oracle Product Management is using this functionality to create "UPK-casts" for enablement purposes. We do this by capturing PowerPoint slides, then adding sound, allowing us to create our own recorded "webcasts". Because we develop these independently, we control the content and have more flexibility to edit the content as needed. Whether it's a change to a single frame or an entire topic, we can react quickly, providing our users with the most up-to-date information. And you don't need expensive equipment or a sound studio to achieve good sound quality. Depending on how your end users are accessing your content, a $35 head set can do the trick. Just be sure to follow the best practices for sound recording as outlined in the UPK documentation. Tip: we've found that we get the best results with sound consistency when we record all the sound for a topic at one sitting. UPK 3.6.1 is now available for download from Oracle E-Delivery. Upgrade today and have fun creating more robust, engaging content for your users! - Karen Rihs, Oracle UPK & Tutor Outbound Product Management

Read the article

Default Screensaver on Mac OS X

- by DanieL

Hi, How do I change the default screensaver in Mac OS X using shell. I am writing a script to customize computers that I need to distribute. In particular I would like them all to have the same default screensaver. How could I change this in a script? So far I have done the following: I have a com.apple.screensaver.default.plist file with the screensaver settings I want in it, and in the script I copy it to /Users/guest/Library/Preferences/ByHost/com.apple.screensaver.${UUID}.plist where UUID is the relevant value. I have modified /System/Library/Frameworks/Screensaver.framework/Versions/A/Resources/EngineDefaults.plist to have the screensaver I want as the default settings. But when I open Screensaver settings in System Preferences after running the script, the default screensaver is Flurry! What can I do to make this work? Thanks, ChilisWorld

Read the article

How to use SharePoint modal dialog box to display Custom Page Part1

- by ybbest

In the part1 of this series, I will show you how to use the modal dialog box to display the custom page and close the page. You can download solution here. 1. Firstly, I create custom action on the list item ECB called Display Custom Page. To do so, you need to create an element item in SharePoint project and copy the following xml to the element file. <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <CustomAction Id="ReportConcern" RegistrationType="ContentType" RegistrationId="0x010100866B1423D33DDA4CA1A4639B54DD4642" Location="EditControlBlock" Sequence="107" Title="Display Custom Page" Description="To Display Custom Page in a modal dialog box on this item"> <UrlAction Url="javascript: function CallDETCustomDialog(dialogResult, returnValue) { SP.UI.ModalDialog.RefreshPage(SP.UI.DialogResult.OK); } var options = { url: '{SiteUrl}' + '/_layouts/YBBEST/TitleRename.aspx?List={ListId}&ID={ItemId}', title: 'Rename title', allowMaximize: false, showClose: true, width: 500, height: 300, dialogReturnValueCallback: CallDETCustomDialog }; SP.UI.ModalDialog.showModalDialog(options);" /> </CustomAction> </Elements> 2. In your code behind, you can implement a close dialog function as below. This will close your modal dialog box once the button is clicked. protected void CloseDialog() { if (HttpContext.Current.Request.QueryString["IsDlg"] == null) return; if (!ClientScript.IsStartupScriptRegistered("CloseDialogFunction")) { const string script = "<script type='text/javascript'>" + "SP.UI.ModalDialog.commonModalDialogClose(1, 1);" + "</script>"; ClientScript.RegisterStartupScript(GetType(), "CloseDialogFunction", script); } }

Read the article

Emails forwarded via postfix get flagged as spam and forged in Gmail

- by Kendall Hopkins

I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

Read the article

How to use SharePoint modal dialog box to display Custom Page Part1

- by ybbest

In the part1 of this series, I will show you how to use the modal dialog box to display the custom page and close the page. You can download solution here. 1. Firstly, I create custom action on the list item ECB called Display Custom Page. To do so, you need to create an element item in SharePoint project and copy the following xml to the element file. <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <CustomAction Id="ReportConcern" RegistrationType="ContentType" RegistrationId="0x010100866B1423D33DDA4CA1A4639B54DD4642" Location="EditControlBlock" Sequence="107" Title="Display Custom Page" Description="To Display Custom Page in a modal dialog box on this item"> <UrlAction Url="javascript: function CallDETCustomDialog(dialogResult, returnValue) { SP.UI.ModalDialog.RefreshPage(SP.UI.DialogResult.OK); } var options = { url: '{SiteUrl}' + '/_layouts/YBBEST/TitleRename.aspx?List={ListId}&ID={ItemId}', title: 'Rename title', allowMaximize: false, showClose: true, width: 500, height: 300, dialogReturnValueCallback: CallDETCustomDialog }; SP.UI.ModalDialog.showModalDialog(options);" /> </CustomAction> </Elements> 2. In your code behind, you can implement a close dialog function as below. This will close your modal dialog box once the button is clicked. protected void CloseDialog() { if (HttpContext.Current.Request.QueryString["IsDlg"] == null) return; if (!ClientScript.IsStartupScriptRegistered("CloseDialogFunction")) { const string script = "<script type='text/javascript'>" + "SP.UI.ModalDialog.commonModalDialogClose(1, 1);" + "</script>"; ClientScript.RegisterStartupScript(GetType(), "CloseDialogFunction", script); } }

Read the article

GMail suspects confirmation email in stealing personal information

- by Dennis Gorelik

When user registers on my web site, web site sends user email confirmation link. Subject: Please confirm your email address Body:Please open this link in your browser to confirm your email address: http://www.postjobfree.com/a/c301718062444f96ba0e358ea833c9b3 This link will expire on: 6/9/2012 8:04:07 PM EST. If my web site sends that email to GMaill (either @gmail.com or another domain that's handled by Google Apps) and that user never emailed to email -- then GMail not only puts the email to spam folder, but also adds prominent red warning:Be careful with this message. Similar messages were used to steal people's personal information. Unless you trust the sender, don't click links or reply with personal information. Learn more That warning really scares many of my users, so they are afraid to open that link and confirm their email. What can I do about it? Ideally I would like that message end up in user's inbox, not spam folder. But at least how do I prevent that scary message? IP address of my mailing server is not blacklisted: http://www.mxtoolbox.com/SuperTool.aspx?action=blacklist%3a208.43.198.72 I use SPF and DKIM signature. Below is the email that ended up in spam folder with that scary red message. Delivered-To: [email protected] Received: by 10.112.84.98 with SMTP id x2csp36568lby; Fri, 8 Jun 2012 17:04:15 -0700 (PDT) Received: by 10.60.25.6 with SMTP id y6mr9110318oef.42.1339200255375; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Return-Path: Received: from smtp.postjobfree.com (smtp.postjobfree.com. [208.43.198.72]) by mx.google.com with ESMTP id v8si6058193oev.44.2012.06.08.17.04.14; Fri, 08 Jun 2012 17:04:15 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) client-ip=208.43.198.72; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 208.43.198.72 as permitted sender) [email protected]; dkim=pass [email protected] DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; d=postjobfree.com; s=postjobfree.com; h= received:message-id:mime-version:from:to:date:subject:content-type; b=TCip/3hP1WWViWB1cdAzMFPjyi/aUKXQbuSTVpEO7qr8x3WdMFhJCqZciA69S0HB4 Koatk2cQQ3fOilr4ledCgZYemLSJgwa/ZRhObnqgPHAglkBy8/RAwkrwaE0GjLKup 0XI6G2wPlh+ReR+inkMwhCPHFInmvrh4evlBx/VlA= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=postjobfree.com; s=postjobfree.com; h=content-type:subject:date:to:from:mime-version:message-id; bh=N59EIgRECIlAnd41LY4HY/OFI+v1p7t5M9yP+3FsKXY=; b=J3/BdZmpjzP4I6GA4ntmi4REu5PpOcmyzEL+6i7y7LaTR8tuc2h7fdW4HaMPlB7za Lj4NJPed61ErumO66eG4urd1UfyaRDtszWeuIbcIUqzwYpnMZ8ytaj8DPcWPE3JYj oKhcYyiVbgiFjLujib3/2k2PqDIrNutRH9Ln7puz4= Received: from sv3035 (sv3035 [208.43.198.72]) by smtp.postjobfree.com with SMTP; Fri, 8 Jun 2012 20:04:07 -0400 Message-ID: MIME-Version: 1.0 From: "PostJobFree Notification" To: [email protected] Date: 8 Jun 2012 20:04:07 -0400 Subject: Please confirm your email address Content-Type: multipart/alternative; boundary=--boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Please open this link in your browser to confirm your email addre= ss: =0D=0Ahttp://www.postjobfree.com/a/c301718062444f96ba0e358ea8= 33c9b3 =0D=0AThis link will expire on: 6/9/2012 8:04:07 PM EST. =0D=0A ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj1Db250ZW50LVR5cGUgY29udGVu dD0idGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij48L2hlYWQ+DQo8Ym9keT48ZGl2 Pg0KUGxlYXNlIG9wZW4gdGhpcyBsaW5rIGluIHlvdXIgYnJvd3NlciB0byBjb25m aXJtIHlvdXIgZW1haWwgYWRkcmVzczo8YnIgLz48YSBocmVmPSJodHRwOi8vd3d3 LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRmOTZiYTBlMzU4ZWE4MzNj OWIzIj5odHRwOi8vd3d3LnBvc3Rqb2JmcmVlLmNvbS9hL2MzMDE3MTgwNjI0NDRm OTZiYTBlMzU4ZWE4MzNjOWIzPC9hPjxiciAvPlRoaXMgbGluayB3aWxsIGV4cGly ZSBvbjogNi85LzIwMTIgODowNDowNyBQTSBFU1QuPGJyIC8+DQo8L2Rpdj48L2Jv ZHk+PC9odG1sPg== ----boundary_107_ffa6a9ea-01dc-40f5-a50c-4c3b3d113f08--

Read the article

Load-Module equivalient in PowerShell v1

- by friism

(Cross-post from Stackoverflow) For reasons of script portability, I need to dynamically load snap-ins in a PowerShell script (ie. I don't want to actually install it). This is easily accomplished in PowerShell v2 with the Load-Module function. I need to run this particular script on a machine where I, for various reasons, do not want to install PowerShell v2, but have v1. Is there a Load-Module equivalent in PowerShell v1?

Read the article

SYS2 Scripts Updated – Scripts to monitor database backup, database space usage and memory grants now available

- by Davide Mauri

I’ve just released three new scripts of my “sys2” script collection that can be found on CodePlex: Project Page: http://sys2dmvs.codeplex.com/ Source Code Download: http://sys2dmvs.codeplex.com/SourceControl/changeset/view/57732 The three new scripts are the following sys2.database_backup_info.sql sys2.query_memory_grants.sql sys2.stp_get_databases_space_used_info.sql Here’s some more details: database_backup_info This script has been made to quickly check if and when backup was done. It will report the last full, differential and log backup date and time for each database. Along with these information you’ll also get some additional metadata that shows if a database is a read-only database and its recovery model: By default it will check only the last seven days, but you can change this value just specifying how many days back you want to check. To analyze the last seven days, and list only the database with FULL recovery model without a log backup select * from sys2.databases_backup_info(default) where recovery_model = 3 and log_backup = 0 To analyze the last fifteen days, and list only the database with FULL recovery model with a differential backup select * from sys2.databases_backup_info(15) where recovery_model = 3 and diff_backup = 1 I just love this script, I use it every time I need to check that backups are not too old and that t-log backup are correctly scheduled. query_memory_grants This is just a wrapper around sys.dm_exec_query_memory_grants that enriches the default result set with the text of the query for which memory has been granted or is waiting for a memory grant and, optionally, its execution plan stp_get_databases_space_used_info This is a stored procedure that list all the available databases and for each one the overall size, the used space within that size, the maximum size it may reach and the auto grow options. This is another script I use every day in order to be able to monitor, track and forecast database space usage. As usual feedbacks and suggestions are more than welcome!

Read the article

apache error log for rewrite rule

- by Imran Naqvi

Hi, i am getting following error in apache log File does not exist: D:/wamp/www/script/products, referer: http://localhost/script/products/category/product-123.html whenever following url localhost/script/products/category/product-123.html is parsed through this rewrite rule RewriteRule ^products/([~A-Za-z0-9-"]+)/([~A-Za-z0-9-".]+).html$ index.php?page_type=products&prod=$2 [L]. The script and rule is working fine but i am getting that error in apache error log. I have activated RewriteLog, but nothing is showing up in the rewrite.log file. Its empty. Please help and thanks in advance.

Read the article

Parallel prologue and epilogue in Grid Engine

- by ajdecon

We have a cluster being used to run MPI jobs for a customer. Previously this cluster used Torque as the scheduler, but we are transitioning to Grid Engine 6.2u5 (for some other features). Unfortunately, we are having trouble duplicating some of our maintenance scripts in the Grid Engine environment. In Torque, we have a prologue.parallel script which is used to carry out an automated health-check on the node. If this script returns a fail condition, Torque will helpfully offline the node and re-queue the job to use a different group of nodes. In Grid Engine, however, the queue "prolog" only runs on the head node of the job. We can manually run our prologue script from the startmpi.sh initialization script, for the mpi parallel environment; but I can't figure out how to detect a fail condition and carry out the same "mark offline and requeue" procedure. Any suggestions?

Read the article

Create nice animation on your ASP.NET Menu control using jQuery

- by hajan

In this blog post, I will show how you can apply some nice animation effects on your ASP.NET Menu control. ASP.NET Menu control offers many possibilities, but together with jQuery, you can make very rich, interactive menu accompanied with animations and effects. Lets start with an example: - Create new ASP.NET Web Application and give it a name - Open your Default.aspx page (or any other .aspx page where you will create the menu) - Our page ASPX code is: <form id="form1" runat="server"> <div id="menu"> <asp:Menu ID="Menu1" runat="server" Orientation="Horizontal" RenderingMode="List"> <Items> <asp:MenuItem NavigateUrl="~/Default.aspx" ImageUrl="~/Images/Home.png" Text="Home" Value="Home" /> <asp:MenuItem NavigateUrl="~/About.aspx" ImageUrl="~/Images/Friends.png" Text="About Us" Value="AboutUs" /> <asp:MenuItem NavigateUrl="~/Products.aspx" ImageUrl="~/Images/Box.png" Text="Products" Value="Products" /> <asp:MenuItem NavigateUrl="~/Contact.aspx" ImageUrl="~/Images/Chat.png" Text="Contact Us" Value="ContactUs" /> </Items> </asp:Menu> </div> </form> As you can see, we have ASP.NET Menu with Horizontal orientation and RenderMode=”List”. It has four Menu Items where for each I have specified NavigateUrl, ImageUrl, Text and Value properties. All images are in Images folder in the root directory of this web application. The images I’m using for this demo are from Free Web Icons. - Next, lets create CSS for the LI and A tags (place this code inside head tag) <style type="text/css"> li { border:1px solid black; padding:20px 20px 20px 20px; width:110px; background-color:Gray; color:White; cursor:pointer; } a { color:White; font-family:Tahoma; } </style> This is nothing very important and you can change the style as you want. - Now, lets reference the jQuery core library directly from Microsoft CDN. <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js"></script> - And we get to the most interesting part, applying the animations with jQuery Before we move on writing jQuery code, lets see what is the HTML code that our ASP.NET Menu control generates in the client browser. <ul class="level1"> <li><a class="level1" href="Default.aspx"><img src="Images/Home.png" alt="" title="" class="icon" />Home</a></li> <li><a class="level1" href="About.aspx"><img src="Images/Friends.png" alt="" title="" class="icon" />About Us</a></li> <li><a class="level1" href="Products.aspx"><img src="Images/Box.png" alt="" title="" class="icon" />Products</a></li> <li><a class="level1" href="Contact.aspx"><img src="Images/Chat.png" alt="" title="" class="icon" />Contact Us</a></li> </ul> So, it generates unordered list which has class level1 and for each item creates li element with an anchor with image + menu text inside it. If we want to access the list element only from our menu (not other list element sin the page), we need to use the following jQuery selector: “ul.level1 li”, which will find all li elements which have parent element ul with class level1. Hence, the jQuery code is: <script type="text/javascript"> $(function () { $("ul.level1 li").hover(function () { $(this).stop().animate({ opacity: 0.7, width: "170px" }, "slow"); }, function () { $(this).stop().animate({ opacity: 1, width: "110px" }, "slow"); }); }); </script> I’m using hover, so that the animation will occur once we go over the menu item. The two different functions are one for the over, the other for the out effect. The following line $(this).stop().animate({ opacity: 0.7, width: "170px" }, "slow"); does the real job. So, this will first stop any previous animations (if any) that are in progress and will animate the menu item by giving to it opacity of 0.7 and changing the width to 170px (the default width is 110px as in the defined CSS style for li tag). This happens on mouse over. The second function on mouse out reverts the opacity and width properties to the default ones. The last parameter “slow” is the speed of the animation. The end result is: The complete ASPX code: <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>ASP.NET Menu + jQuery</title> <style type="text/css"> li { border:1px solid black; padding:20px 20px 20px 20px; width:110px; background-color:Gray; color:White; cursor:pointer; } a { color:White; font-family:Tahoma; } </style> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js"></script> <script type="text/javascript"> $(function () { $("ul.level1 li").hover(function () { $(this).stop().animate({ opacity: 0.7, width: "170px" }, "slow"); }, function () { $(this).stop().animate({ opacity: 1, width: "110px" }, "slow"); }); }); </script> </head> <body> <form id="form1" runat="server"> <div id="menu"> <asp:Menu ID="Menu1" runat="server" Orientation="Horizontal" RenderingMode="List"> <Items> <asp:MenuItem NavigateUrl="~/Default.aspx" ImageUrl="~/Images/Home.png" Text="Home" Value="Home" /> <asp:MenuItem NavigateUrl="~/About.aspx" ImageUrl="~/Images/Friends.png" Text="About Us" Value="AboutUs" /> <asp:MenuItem NavigateUrl="~/Products.aspx" ImageUrl="~/Images/Box.png" Text="Products" Value="Products" /> <asp:MenuItem NavigateUrl="~/Contact.aspx" ImageUrl="~/Images/Chat.png" Text="Contact Us" Value="ContactUs" /> </Items> </asp:Menu> </div> </form> </body> </html> Hope this was useful. Regards, Hajan

Read the article

Windows wait command till a system time

- by user53864

I have made a batch script for backup recently. Somewhere in the middle of script I'll have to wait for some time to be reached and then resume the next line of the script. I've scheduled the script at 4:00PM and after the wait command the next line should start at exactly 5:30PM. I thought of using SLEEP command but it's not sure that the commands used before the wait command will end up at certain time(due to inconsistent file sizes) but it's sure that they will be done by 5:00 or 5:10 and next it should execute wait command which waits for certain system clock. I'm checking if there is any command that waits or sleeps until the time specified reaches the system time and resumes there after. Anybody came across this situation and how was that resolved?

Read the article

Making Sense of ASP.NET Paths

- by Renso

Making Sense of ASP.NET Paths ASP.Net includes quite a plethora of properties to retrieve path information about the current request, control and application. There's a ton of information available about paths on the Request object, some of it appearing to overlap and some of it buried several levels down, and it can be confusing to find just the right path that you are looking for. To keep things straight I thought it a good idea to summarize the path options along with descriptions and example paths. I wrote a post about this a long time ago in 2004 and I find myself frequently going back to that page to quickly figure out which path I’m looking for in processing the current URL. Apparently a lot of people must be doing the same, because the original post is the second most visited even to this date on this blog to the tune of nearly 500 hits per day. So, I decided to update and expand a bit on the original post with a little more information and clarification based on the original comments. Request Object Paths Available Here's a list of the Path related properties on the Request object (and the Page object). Assume a path like http://www.west-wind.com/webstore/admin/paths.aspx for the paths below where webstore is the name of the virtual. Request Property Description and Value ApplicationPath Returns the web root-relative logical path to the virtual root of this app. /webstore/ PhysicalApplicationPath Returns local file system path of the virtual root for this app. c:\inetpub\wwwroot\webstore PhysicalPath Returns the local file system path to the current script or path. c:\inetpub\wwwroot\webstore\admin\paths.aspx Path FilePath CurrentExecutionFilePath All of these return the full root relative logical path to the script page including path and scriptname. CurrentExcecutionFilePath will return the ‘current’ request path after a Transfer/Execute call while FilePath will always return the original request’s path. /webstore/admin/paths.aspx AppRelativeCurrentExecutionFilePath Returns an ASP.NET root relative virtual path to the script or path for the current request. If in a Transfer/Execute call the transferred Path is returned. ~/admin/paths.aspx PathInfo Returns any extra path following the script name. If no extra path is provided returns the root-relative path (returns text in red below). string.Empty if no PathInfo is available. /webstore/admin/paths.aspx/ExtraPathInfo RawUrl Returns the full root relative URL including querystring and extra path as a string. /webstore/admin/paths.aspx?sku=wwhelp40 Url Returns a fully qualified URL including querystring and extra path. Note this is a Uri instance rather than string. http://www.west-wind.com/webstore/admin/paths.aspx?sku=wwhelp40 UrlReferrer The fully qualified URL of the page that sent the request. This is also a Uri instance and this value is null if the page was directly accessed by typing into the address bar or using an HttpClient based Referrer client Http header. http://www.west-wind.com/webstore/default.aspx?Info Control.TemplateSourceDirectory Returns the logical path to the folder of the page, master or user control on which it is called. This is useful if you need to know the path only to a Page or control from within the control. For non-file controls this returns the Page path. /webstore/admin/ As you can see there’s a ton of information available there for each of the three common path formats: Physical Path is an OS type path that points to a path or file on disk. Logical Path is a Web path that is relative to the Web server’s root. It includes the virtual plus the application relative path. ~/ (Root-relative) Path is an ASP.NET specific path that includes ~/ to indicate the virtual root Web path. ASP.NET can convert virtual paths into either logical paths using Control.ResolveUrl(), or physical paths using Server.MapPath(). Root relative paths are useful for specifying portable URLs that don’t rely on relative directory structures and very useful from within control or component code. You should be able to get any necessary format from ASP.NET from just about any path or script using these mechanisms. ~/ Root Relative Paths and ResolveUrl() and ResolveClientUrl() ASP.NET supports root-relative virtual path syntax in most of its URL properties in Web Forms. So you can easily specify a root relative path in a control rather than a location relative path: <asp:Image runat="server" ID="imgHelp" ImageUrl="~/images/help.gif" /> ASP.NET internally resolves this URL by using ResolveUrl("~/images/help.gif") to arrive at the root-relative URL of /webstore/images/help.gif which uses the Request.ApplicationPath as the basepath to replace the ~. By convention any custom Web controls also should use ResolveUrl() on URL properties to provide the same functionality. In your own code you can use Page.ResolveUrl() or Control.ResolveUrl() to accomplish the same thing: string imgPath = this.ResolveUrl("~/images/help.gif"); imgHelp.ImageUrl = imgPath; Unfortunately ResolveUrl() is limited to WebForm pages, so if you’re in an HttpHandler or Module it’s not available. ASP.NET Mvc also has it’s own more generic version of ResolveUrl in Url.Decode: <script src="<%= Url.Content("~/scripts/new.js") %>" type="text/javascript"></script> which is part of the UrlHelper class. In ASP.NET MVC the above sort of syntax is actually even more crucial than in WebForms due to the fact that views are not referencing specific pages but rather are often path based which can lead to various variations on how a particular view is referenced. In a Module or Handler code Control.ResolveUrl() unfortunately is not available which in retrospect seems like an odd design choice – URL resolution really should happen on a Request basis not as part of the Page framework. Luckily you can also rely on the static VirtualPathUtility class: string path = VirtualPathUtility.ToAbsolute("~/admin/paths.aspx"); VirtualPathUtility also many other quite useful methods for dealing with paths and converting between the various kinds of paths supported. One thing to watch out for is that ToAbsolute() will throw an exception if a query string is provided and doesn’t work on fully qualified URLs. I wrote about this topic with a custom solution that works fully qualified URLs and query strings here (check comments for some interesting discussions too). Similar to ResolveUrl() is ResolveClientUrl() which creates a fully qualified HTTP path that includes the protocol and domain name. It’s rare that this full resolution is needed but can be useful in some scenarios. Mapping Virtual Paths to Physical Paths with Server.MapPath() If you need to map root relative or current folder relative URLs to physical URLs or you can use HttpContext.Current.Server.MapPath(). Inside of a Page you can do the following: string physicalPath = Server.MapPath("~/scripts/ww.jquery.js")); MapPath is pretty flexible and it understands both ASP.NET style virtual paths as well as plain relative paths, so the following also works. string physicalPath = Server.MapPath("scripts/silverlight.js"); as well as dot relative syntax: string physicalPath = Server.MapPath("../scripts/jquery.js"); Once you have the physical path you can perform standard System.IO Path and File operations on the file. Remember with physical paths and IO or copy operations you need to make sure you have permissions to access files and folders based on the Web server user account that is active (NETWORK SERVICE, ASPNET typically). Note the Server.MapPath will not map up beyond the virtual root of the application for security reasons. Server and Host Information Between these settings you can get all the information you may need to figure out where you are at and to build new Url if necessary. If you need to build a URL completely from scratch you can get access to information about the server you are accessing: Server Variable Function and Example SERVER_NAME The of the domain or IP Address wwww.west-wind.com or 127.0.0.1 SERVER_PORT The port that the request runs under. 80 SERVER_PORT_SECURE Determines whether https: was used. 0 or 1 APPL_MD_PATH ADSI DirectoryServices path to the virtual root directory. Note that LM typically doesn’t work for ADSI access so you should replace that with LOCALHOST or the machine’s NetBios name. /LM/W3SVC/1/ROOT/webstore Request.Url and Uri Parsing If you still need more control over the current request URL or you need to create new URLs from an existing one, the current Request.Url Uri property offers a lot of control. Using the Uri class and UriBuilder makes it easy to retrieve parts of a URL and create new URLs based on existing URL. The UriBuilder class is the preferred way to create URLs – much preferable over creating URIs via string concatenation. Uri Property Function Scheme The URL scheme or protocol prefix. http or https Port The port if specifically specified. DnsSafeHost The domain name or local host NetBios machine name www.west-wind.com or rasnote LocalPath The full path of the URL including script name and extra PathInfo. /webstore/admin/paths.aspx Query The query string if any ?id=1 The Uri class itself is great for retrieving Uri parts, but most of the properties are read only if you need to modify a URL in order to change it you can use the UriBuilder class to load up an existing URL and modify it to create a new one. Here are a few common operations I’ve needed to do to get specific URLs: Convert the Request URL to an SSL/HTTPS link For example to take the current request URL and converted it to a secure URL can be done like this: UriBuilder build = new UriBuilder(Request.Url); build.Scheme = "https"; build.Port = -1; // don't inject portUri newUri = build.Uri; string newUrl = build.ToString(); Retrieve the fully qualified URL without a QueryString AFAIK, there’s no native routine to retrieve the current request URL without the query string. It’s easy to do with UriBuilder however: UriBuilder builder = newUriBuilder(Request.Url); builder.Query = ""; stringlogicalPathWithoutQuery = builder.ToString();

Read the article

HTML5 Form Validation

- by Stephen.Walther

The latest versions of Google Chrome (16+), Mozilla Firefox (8+), and Internet Explorer (10+) all support HTML5 client-side validation. It is time to take HTML5 validation seriously. The purpose of the blog post is to describe how you can take advantage of HTML5 client-side validation regardless of the type of application that you are building. You learn how to use the HTML5 validation attributes, how to perform custom validation using the JavaScript validation constraint API, and how to simulate HTML5 validation on older browsers by taking advantage of a jQuery plugin. Finally, we discuss the security issues related to using client-side validation. Using Client-Side Validation Attributes The HTML5 specification discusses several attributes which you can use with INPUT elements to perform client-side validation including the required, pattern, min, max, step, and maxlength attributes. For example, you use the required attribute to require a user to enter a value for an INPUT element. The following form demonstrates how you can make the firstName and lastName form fields required: <!DOCTYPE html> <html > <head> <title>Required Demo</title> </head> <body> <form> <label> First Name: <input required title="First Name is Required!" /> </label> <label> Last Name: <input required title="Last Name is Required!" /> </label> <button>Register</button> </form> </body> </html> If you attempt to submit this form without entering a value for firstName or lastName then you get the validation error message: Notice that the value of the title attribute is used to display the validation error message “First Name is Required!”. The title attribute does not work this way with the current version of Firefox. If you want to display a custom validation error message with Firefox then you need to include an x-moz-errormessage attribute like this: <input required title="First Name is Required!" x-moz-errormessage="First Name is Required!" /> The pattern attribute enables you to validate the value of an INPUT element against a regular expression. For example, the following form includes a social security number field which includes a pattern attribute: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Pattern</title> </head> <body> <form> <label> Social Security Number: <input required pattern="^\d{3}-\d{2}-\d{4}$" title="###-##-####" /> </label> <button>Register</button> </form> </body> </html> The regular expression in the form above requires the social security number to match the pattern ###-##-####: Notice that the input field includes both a pattern and a required validation attribute. If you don’t enter a value then the regular expression is never triggered. You need to include the required attribute to force a user to enter a value and cause the value to be validated against the regular expression. Custom Validation You can take advantage of the HTML5 constraint validation API to perform custom validation. You can perform any custom validation that you need. The only requirement is that you write a JavaScript function. For example, when booking a hotel room, you might want to validate that the Arrival Date is in the future instead of the past: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Constraint Validation API</title> </head> <body> <form> <label> Arrival Date: <input id="arrivalDate" type="date" required /> </label> <button>Submit Reservation</button> </form> <script type="text/javascript"> var arrivalDate = document.getElementById("arrivalDate"); arrivalDate.addEventListener("input", function() { var value = new Date(arrivalDate.value); if (value < new Date()) { arrivalDate.setCustomValidity("Arrival date must be after now!"); } else { arrivalDate.setCustomValidity(""); } }); </script> </body> </html> The form above contains an input field named arrivalDate. Entering a value into the arrivalDate field triggers the input event. The JavaScript code adds an event listener for the input event and checks whether the date entered is greater than the current date. If validation fails then the validation error message “Arrival date must be after now!” is assigned to the arrivalDate input field by calling the setCustomValidity() method of the validation constraint API. Otherwise, the validation error message is cleared by calling setCustomValidity() with an empty string. HTML5 Validation and Older Browsers But what about older browsers? For example, what about Apple Safari and versions of Microsoft Internet Explorer older than Internet Explorer 10? What the world really needs is a jQuery plugin which provides backwards compatibility for the HTML5 validation attributes. If a browser supports the HTML5 validation attributes then the plugin would do nothing. Otherwise, the plugin would add support for the attributes. Unfortunately, as far as I know, this plugin does not exist. I have not been able to find any plugin which supports both the required and pattern attributes for older browsers, but does not get in the way of these attributes in the case of newer browsers. There are several jQuery plugins which provide partial support for the HTML5 validation attributes including: · jQuery Validation — http://docs.jquery.com/Plugins/Validation · html5Form — http://www.matiasmancini.com.ar/jquery-plugin-ajax-form-validation-html5.html · h5Validate — http://ericleads.com/h5validate/ The jQuery Validation plugin – the most popular JavaScript validation library – supports the HTML5 required attribute, but it does not support the HTML5 pattern attribute. Likewise, the html5Form plugin does not support the pattern attribute. The h5Validate plugin provides the best support for the HTML5 validation attributes. The following page illustrates how this plugin supports both the required and pattern attributes: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>h5Validate</title> <style type="text/css"> .validationError { border: solid 2px red; } .validationValid { border: solid 2px green; } </style> </head> <body> <form id="customerForm"> <label> First Name: <input id="firstName" required /> </label> <label> Social Security Number: <input id="ssn" required pattern="^\d{3}-\d{2}-\d{4}$" title="Expected pattern is ###-##-####" /> </label> <input type="submit" /> </form> <script type="text/javascript" src="Scripts/jquery-1.4.4.min.js"></script> <script type="text/javascript" src="Scripts/jquery.h5validate.js"></script> <script type="text/javascript"> // Enable h5Validate plugin $("#customerForm").h5Validate({ errorClass: "validationError", validClass: "validationValid" }); // Prevent form submission when errors $("#customerForm").submit(function (evt) { if ($("#customerForm").h5Validate("allValid") === false) { evt.preventDefault(); } }); </script> </body> </html> When an input field fails validation, the validationError CSS class is applied to the field and the field appears with a red border. When an input field passes validation, the validationValid CSS class is applied to the field and the field appears with a green border. From the perspective of HTML5 validation, the h5Validate plugin is the best of the plugins. It adds support for the required and pattern attributes to browsers which do not natively support these attributes such as IE9. However, this plugin does not include everything in my wish list for a perfect HTML5 validation plugin. Here’s my wish list for the perfect back compat HTML5 validation plugin: 1. The plugin would disable itself when used with a browser which natively supports HTML5 validation attributes. The plugin should not be too greedy – it should not handle validation when a browser could do the work itself. 2. The plugin should simulate the same user interface for displaying validation error messages as the user interface displayed by browsers which natively support HTML5 validation. Chrome, Firefox, and Internet Explorer all display validation errors in a popup. The perfect plugin would also display a popup. 3. Finally, the plugin would add support for the setCustomValidity() method and the other methods of the HTML5 validation constraint API. That way, you could implement custom validation in a standards compatible way and you would know that it worked across all browsers both old and new. Security It would be irresponsible of me to end this blog post without mentioning the issue of security. It is important to remember that any client-side validation — including HTML5 validation — can be bypassed. You should use client-side validation with the intention to create a better user experience. Client validation is great for providing a user with immediate feedback when the user is in the process of completing a form. However, client-side validation cannot prevent an evil hacker from submitting unexpected form data to your web server. You should always enforce your validation rules on the server. The only way to ensure that a required field has a value is to verify that the required field has a value on the server. The HTML5 required attribute does not guarantee anything. Summary The goal of this blog post was to describe the support for validation contained in the HTML5 standard. You learned how to use both the required and the pattern attributes in an HTML5 form. We also discussed how you can implement custom validation by taking advantage of the setCustomValidity() method. Finally, I discussed the available jQuery plugins for adding support for the HTM5 validation attributes to older browsers. Unfortunately, I am unaware of any jQuery plugin which provides a perfect solution to the problem of backwards compatibility.

Read the article

Metro: Creating a Master/Detail View with a WinJS ListView Control

- by Stephen.Walther

The goal of this blog entry is to explain how you can create a simple master/detail view by using the WinJS ListView and Template controls. In particular, I explain how you can use a ListView control to display a list of movies and how you can use a Template control to display the details of the selected movie. Creating a master/detail view requires completing the following four steps: Create the data source – The data source contains the list of movies. Declare the ListView control – The ListView control displays the entire list of movies. It is the master part of the master/detail view. Declare the Details Template control – The Details Template control displays the details for the selected movie. It is the details part of the master/detail view. Handle the selectionchanged event – You handle the selectionchanged event to display the details for a movie when a new movie is selected. Creating the Data Source There is nothing special about our data source. We initialize a WinJS.Binding.List object to represent a list of movies: (function () { "use strict"; var movies = new WinJS.Binding.List([ { title: "Star Wars", director: "Lucas"}, { title: "Shrek", director: "Adamson" }, { title: "Star Trek", director: "Abrams" }, { title: "Spiderman", director: "Raimi" }, { title: "Memento", director: "Nolan" }, { title: "Minority Report", director: "Spielberg" } ]); // Expose the data source WinJS.Namespace.define("ListViewDemos", { movies: movies }); })(); The data source is exposed to the rest of our application with the name ListViewDemos.movies. Declaring the ListView Control The ListView control is declared with the following markup: <div id="movieList" data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource: ListViewDemos.movies.dataSource, itemTemplate: select('#masterItemTemplate'), tapBehavior: 'directSelect', selectionMode: 'single', layout: { type: WinJS.UI.ListLayout } }"> </div> The data-win-options attribute is used to set the following properties of the ListView control: itemDataSource – The ListView is bound to the list of movies which we created in the previous section. Notice that the ListView is bound to ListViewDemos.movies.dataSource and not just ListViewDemos.movies. itemTemplate – The item template contains the template used for rendering each item in the ListView. The markup for this template is included below. tabBehavior – This enumeration determines what happens when you tap or click on an item in the ListView. The possible values are directSelect, toggleSelect, invokeOnly, none. Because we want to handle the selectionchanged event, we set tapBehavior to the value directSelect. selectionMode – This enumeration determines whether you can select multiple items or only a single item. The possible values are none, single, multi. In the code above, this property is set to the value single. layout – You can use ListLayout or GridLayout with a ListView. If you want to display a vertical ListView, then you should select ListLayout. You must associate a ListView with an item template if you want to render anything interesting. The ListView above is associated with an item template named #masterItemTemplate. Here’s the markup for the masterItemTemplate: <div id="masterItemTemplate" data-win-control="WinJS.Binding.Template"> <div class="movie"> <span data-win-bind="innerText:title"></span> </div> </div> This template simply renders the title of each movie. Declaring the Details Template Control The details part of the master/detail view is created with the help of a Template control. Here’s the markup used to declare the Details Template control: <div id="detailsTemplate" data-win-control="WinJS.Binding.Template"> <div> <div> Title: <span data-win-bind="innerText:title"></span> </div> <div> Director: <span data-win-bind="innerText:director"></span> </div> </div> </div> The Details Template control displays the movie title and director. Handling the selectionchanged Event The ListView control can raise two types of events: the iteminvoked and selectionchanged events. The iteminvoked event is raised when you click on a ListView item. The selectionchanged event is raised when one or more ListView items are selected. When you set the tapBehavior property of the ListView control to the value “directSelect” then tapping or clicking a list item raised both the iteminvoked and selectionchanged event. Tapping a list item causes the item to be selected and the item appears with a checkmark. In our code, we handle the selectionchanged event to update the movie details Template when you select a new movie. Here’s the code from the default.js file used to handle the selectionchanged event: var movieList = document.getElementById("movieList"); var detailsTemplate = document.getElementById("detailsTemplate"); var movieDetails = document.getElementById("movieDetails"); // Setup selectionchanged handler movieList.winControl.addEventListener("selectionchanged", function (evt) { if (movieList.winControl.selection.count() > 0) { movieList.winControl.selection.getItems().then(function (items) { // Clear the template container movieDetails.innerHTML = ""; // Render the template detailsTemplate.winControl.render(items[0].data, movieDetails); }); } }); The code above sets up an event handler (listener) for the selectionchanged event. The event handler first verifies that an item has been selected in the ListView (selection.count() > 0). Next, the details for the movie are rendered using the movie details Template (we created this Template in the previous section). The Complete Code For the sake of completeness, I’ve included the complete code for the master/detail view below. I’ve included both the default.html, default.js, and movies.js files. Here is the final code for the default.html file: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>ListViewMasterDetail</title>  <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script>  <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script type="text/javascript" src="js/movies.js"></script> <style type="text/css"> body { font-size: xx-large; } .movie { padding: 5px; } #masterDetail { display: -ms-box; } #movieList { width: 300px; margin: 20px; } #movieDetails { margin: 20px; } </style> </head> <body>  <div id="masterItemTemplate" data-win-control="WinJS.Binding.Template"> <div class="movie"> <span data-win-bind="innerText:title"></span> </div> </div> <div id="detailsTemplate" data-win-control="WinJS.Binding.Template"> <div> <div> Title: <span data-win-bind="innerText:title"></span> </div> <div> Director: <span data-win-bind="innerText:director"></span> </div> </div> </div>  <div id="masterDetail">  <div id="movieList" data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource: ListViewDemos.movies.dataSource, itemTemplate: select('#masterItemTemplate'), tapBehavior: 'directSelect', selectionMode: 'single', layout: { type: WinJS.UI.ListLayout } }"> </div>  <div id="movieDetails"></div> </div> </body> </html> Here is the default.js file: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { WinJS.UI.processAll(); var movieList = document.getElementById("movieList"); var detailsTemplate = document.getElementById("detailsTemplate"); var movieDetails = document.getElementById("movieDetails"); // Setup selectionchanged handler movieList.winControl.addEventListener("selectionchanged", function (evt) { if (movieList.winControl.selection.count() > 0) { movieList.winControl.selection.getItems().then(function (items) { // Clear the template container movieDetails.innerHTML = ""; // Render the template detailsTemplate.winControl.render(items[0].data, movieDetails); }); } }); } }; app.start(); })(); Here is the movies.js file: (function () { "use strict"; var movies = new WinJS.Binding.List([ { title: "Star Wars", director: "Lucas"}, { title: "Shrek", director: "Adamson" }, { title: "Star Trek", director: "Abrams" }, { title: "Spiderman", director: "Raimi" }, { title: "Memento", director: "Nolan" }, { title: "Minority Report", director: "Spielberg" } ]); // Expose the data source WinJS.Namespace.define("ListViewDemos", { movies: movies }); })(); Summary The purpose of this blog entry was to describe how to create a simple master/detail view by taking advantage of the WinJS ListView control. We handled the selectionchanged event of the ListView control to display movie details when you select a movie in the ListView.

Search Results

Search found 40644 results on 1626 pages for 'content script'.

Page 340/1626 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347 | Next Page >

- by durilai

- by Rick Strahl

- by fretje

- by samsudeen

- by Django Reinhardt

- by Stephen.Walther

- by Rick Strahl

- by Kristoffer

- by Mehrdad

- by LeonShaner

- by [email protected]

- by DanieL

- by ybbest

- by Kendall Hopkins

- by ybbest

- by Dennis Gorelik

- by friism

- by Davide Mauri

- by Imran Naqvi

- by ajdecon

- by hajan

- by user53864

- by Renso

- by Stephen.Walther

- by Stephen.Walther

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347 | Next Page >