Search Results

Search found 11321 results on 453 pages for 'shared libraries'.

Page 340/453 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

  - by Steve

  I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

  Read the article

• Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

  - by BubbaJ

  I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

  Read the article

• Getting PATH right for python after MacPorts install

  - by BenjaminGolder

  I can't import some python libraries (PIL, psycopg2) that I just installed with MacPorts. I looked through these forums, and tried to adjust my PATH variable in $HOME/.bash_profile in order to fix this but it did not work. I added the location of PIL and psycopg2 to PATH. I know that Terminal is a version of python in /usr/local/bin, rather than the one installed by MacPorts at /opt/local/bin. Do I need to use the MacPorts version of Python in order to ensure that PIL and psycopg2 are on sys.path when I use python in Terminal? Should I switch to the MacPorts version of Python, or will that cause more problems? In case it is helpful, here are more facts: PIl and psycopg2 are installed in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages which pythonreturns/usr/bin/python echo $PATHreturns (I separated each path for easy reading): :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/ :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages :/opt/local/bin :/opt/local/sbin :/usr/local/git/bin :/usr/bin :/bin :/usr/sbin :/sbin :/usr/local/bin :/usr/local/git/bin :/usr/X11/bin :/opt/local/bin in python, sys.path returns: /Library/Frameworks/SQLite3.framework/Versions/3/Python /Library/Python/2.6/site-packages/numpy-override /Library/Frameworks/GDAL.framework/Versions/1.7/Python/site-packages /Library/Frameworks/cairo.framework/Versions/1/Python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python26.zip /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-darwin /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac/lib-scriptpackages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-old /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-dynload /Library/Python/2.6/site-packages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/PyObjC /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/wx-2.8-mac-unicode I welcome any criticism and comments, if any of the above looks foolish or poorly conceived. I'm new to all of this. Thanks! Running OSX 10.6.5 on a MacBook Pro, invoking python 2.6.1 from Terminal

  Read the article

• CA SiteMinder Configuration for Ubuntu

  - by Matt Franklin

  I receive the following error when attempting to start apache through the init.d script: *apache2: Syntax error on line 186 of /etc/apache2/apache2.conf: Syntax error on line 4 of /etc/apache2/mods-enabled/auth_sm.conf: Cannot load /apps/netegrity/webagent/bin/libmod_sm22.so into server: libsmerrlog.so: cannot open shared object file: No such file or directory* SiteMinder does not officially support Ubuntu, so I am having trouble finding any configuration documentation to help me troubleshoot this issue. I successfully installed the SiteMinder binaries and registered the trusted host with the server, but I am having trouble getting the apache mod to load correctly. I have added the following lines to a new auth_sm.conf file in /etc/apache2/mods-available and symlinked to it in /etc/apache2/mods-enabled: SetEnv LD_LIBRARY_PATH /apps/netegrity/webagent/bin SetEnv PATH ${PATH}:${LD_LIBRARY_PATH} LoadModule sm_module /apps/netegrity/webagent/bin/libmod_sm22.so SmInitFile "/etc/apache2/WebAgent.conf" Alias /siteminderagent/pwcgi/ "/apps/netegrity/webagent/pw/" <Directory "/apps/netegrity/webagent/pw/"> Options Indexes MultiViews ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> UPDATE: Output of ldd libmod_sm22.so: ldd /apps/netegrity/webagent/bin/libmod_sm22.so linux-gate.so.1 = (0xb8075000) libsmerrlog.so = /apps/netegrity/webagent/bin/libsmerrlog.so (0xb7ec0000) libsmeventlog.so = /apps/netegrity/webagent/bin/libsmeventlog.so (0xb7ebb000) libpthread.so.0 = /lib/tls/i686/cmov/libpthread.so.0 (0xb7e9a000) libdl.so.2 = /lib/tls/i686/cmov/libdl.so.2 (0xb7e96000) librt.so.1 = /lib/tls/i686/cmov/librt.so.1 (0xb7e8d000) libstdc++.so.5 = /usr/lib/libstdc++.so.5 (0xb7dd3000) libm.so.6 = /lib/tls/i686/cmov/libm.so.6 (0xb7dad000) libgcc_s.so.1 = /lib/libgcc_s.so.1 (0xb7d9e000) libc.so.6 = /lib/tls/i686/cmov/libc.so.6 (0xb7c3a000) libsmcommonutil.so = /apps/netegrity/webagent/bin/libsmcommonutil.so (0xb7c37000) /lib/ld-linux.so.2 (0xb8076000) UPDATE: The easiest way to set environment variables for the Apache run user in Ubuntu is to edit the /etc/apache2/envvars file and add export statements for any library paths you may need

  Read the article

• Using unixODBC to connect to Oracle server

  - by Paul

  I am trying to configure our web server (RHEL 5.4 x86) to connect to an Oracle database using unixODBC. I have installed unixODBC-2.2.11-7.1.1, which yum tells me is the latest version. I have also installed the Oracle InstantClient 11.2 and the Oracle InstantClient ODBC library. I have symlinked the all the .so files in /usr/lib/oracle/11.2/client/lib to /usr/lib. I have set $LD_LIBRARY_PATH to /usr/lib/, $ORACLE_HOME to /usr/lib/oracle and $TNS_ADMIN to the directory containing my (valid) Tnsnames.ora file. Here are the contents of my /etc/odbcinst.ini file: [Oracle] Description = Oracle ODBC Connection Driver = /usr/lib/libsqora.so.11.1 Setup = FileUsage = and my /etc/odbc.ini file: [Oracle] Application Attributes = T Attributes = W BatchAutocommitMode = IfAllSuccessful CloseCursor = F DisableDPM = F DisableMTS = T Driver = Oracle EXECSchemaOpt = EXECSyntax = T Failover = T FailoverDelay = 10 FailoverRetryCount = 10 FetchBufferSize = 64000 ForceWCHAR = F Lobs = T Longs = T MetadataIdDefault = F QueryTimeout = T ResultSets = T ServerName = //<host>:<port>/<db> SQLGetData extensions = F Translation DLL = Translation Option = 0 UserID = (ServerName has been edited...host, port, and db are actually there, and correct) When I run isql I get $ isql -v Oracle isql: symbol lookup error: /usr/lib/libsqora.so.11.1: undefined symbol: SQLGetPrivateProfileStringW And running dltest gives me $ dltest Oracle SQLConnect [dltest] ERROR dlopen: Oracle: cannot open shared object file: No such file or directory If anyone has any insights I would be grateful, I've been trying to get this to connect for about 5 hours now... I am going home for the night, but will gladly provide more details, if necessary, tomorrow morning, to anyone willing to help...

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• Setting up Tomcat6 properly in Ubuntu 10.04

  - by aasukisuki

  We have a Tomcat6 instance running on Ubuntu 10.04LTS. Our test box was just a Windows machine running Tomcat6. Both machines (Linux and Windows) have 1GB of ram. Via the Tomcat configuration tool in windows, I was able to set the min/max/permgen sizes of the JVM. Those were set to 256/512/128 respectively. Now on the Ubuntu box, I've tried setting the JVM options in several different places including: Adding JAVA_OPTS & CATALINA_OPTS in /etc/environment Adding JAVA_OPTS in $CATALINA_HOME/bin/catalina.sh Creating setenv.sh and adding JAVA_OPTS in $CATALINA_HOME/bin Adding JAVA_OPTS directly to /etc/init.d/tomcat6 Un-commenting the JAVA_OPTS and modifying it in /etc/default/tomcat6 Nearly all of those methods did not work, except for modifying /etc/init.d/tomcat6 directly (and possibly the /etc/default/tomcat6 change, but I just did that). However, my understanding is that when you change these settings, only one JVM should be used for the entire tomcat6 instance, and that memory is shared among the applications. On our windows box, tomcat6 is run as a service, and appears to behave this way. However, when I look at htop on the linux box, there are 20+ tomcat6 instances (I have an app that triggers internal jobs every X seconds using chron, so maybe these are threads? Or are they actual instances) all with those memory settings. The app runs fine for a bit, but eventually ends up locking up. I'm guessing each of these apps thinks it has 512m to work with and never GC's and then locks tomcat up completely. What is the proper way to set all of this up?

  Read the article

• therubyracer on Ubuntu install issues with ruby-2.0.0-p247

  - by Victor S

  I can't seem to get therubyracer gem installed on ubuntu, i get the following errors, anyone can help? ERROR: Error installing therubyracer: ERROR: Failed to build gem native extension. /home/victorstan/.rvm/rubies/ruby-2.0.0-p247/bin/ruby extconf.rb checking for main() in -lpthread... yes creating Makefile make compiling constraints.cc compiling array.cc compiling value.cc compiling invocation.cc compiling primitive.cc compiling trycatch.cc compiling context.cc compiling exception.cc compiling template.cc compiling accessor.cc compiling object.cc compiling script.cc compiling external.cc compiling stack.cc compiling gc.cc compiling backref.cc compiling heap.cc compiling v8.cc compiling constants.cc compiling date.cc compiling function.cc compiling rr.cc compiling message.cc compiling init.cc compiling string.cc compiling handles.cc compiling signature.cc compiling locker.cc linking shared-object v8/init.so g++: /home/victorstan/.rvm/gems/ruby-2.0.0-p247@global/gems/libv8-3.11.8.17-x86_64-linux/vendor/v8/out/ia32.release/obj.target/tools/gyp/libv8_base.a: No such file or directory g++: /home/victorstan/.rvm/gems/ruby-2.0.0-p247@global/gems/libv8-3.11.8.17-x86_64-linux/vendor/v8/out/ia32.release/obj.target/tools/gyp/libv8_snapshot.a: No such file or directory make: *** [init.so] Error 1 Update It seems it's trying to use a 32 bit library instead of a 64 bit library, anyone else experience issue trying to install 64 bit applications and packages on Ubuntu, and it trying to install 32 bit version instead (even though the system is a 64 Linux)? Related: https://github.com/cowboyd/therubyracer/issues/262

  Read the article

• Outlook unable to synchronize SharePoint library - error 0x80004005

  - by DLux

  We have one large library (~10 GB) on SharePoint that cannot be synchronized with Outlook, even if you only attempt to synch one of the smaller sub folders in the library. Other libraries (or other library sub folders) work fine with Outlook. This is with MOSS 2007 SP1 and Outlook 2007 SP2. The error is: Task 'SharePoint' reported error (0x80004005): 'An error occurred either in Outlook or SharePoint. Contact the SharePoint site administrator.' Reproducing the error Open up the large SharePoint document library in Internet Explorer From the Actions menu, select Connect to Outlook Select Allow on the stssync: security warning that pops up Outlook automatically tries an initial sync and sync status immediately shows the above error. Update 1: I verified the same issue occurs on Windows XP SP3 with IE 6 using Outlook 2007 SP2 and the same SharePoint library (it was originally tested on Windows 7). The issue is definitely related to the library or Outlook. Update 2: Using stsadm I exported the site with this large document library (8.6 GB 15,000 items) and imported it on to a development system. The result is the same on the development system - multiple clients are unable to connect Outlook to the library and get the 0x80004005 error above.

  Read the article

• The file STDOLE2.TLB cannot be found or contains a Visual Basic for Applications library that is not

  - by Jim Birchall

  In Microsoft Project 2007 Professional, If I select Tools Macro Security the message: The file "STDOLE.TLB" cannot be found or contains a Visual Basic for Applications library that is not valid. Verify that the file name is correct, and try again. If the Visual Basic for Applications library is invalid, reinstall Project. I am a software developer and I have developed an Add-In for MS Project using Visual Studio 2005, with all the problems that entails. As such my machine is configured with both Project 2003 Professional and Project 2007 Professional. I only noticed this error when trying to debug my Add-In. The Add-In loads and draws the menu, but when I click on the menu option I receive this error (which is also generated by the Tools Macros Security option mentioned above). I have tried repairing office installations and uninstalling everything and then re-installing everything all over again, but after several hours I still get the same problem. Does anyone have any idea how to resolve this? Some method of finding out what type libraries are registered with STDOLE2.TLB may help if I can identify what is causing the problem. Also a way of manually unregistering the nasty library may be helpful. My machine is configured as follows: Windows 7 Ultimate x64 Project 2003 Professional Office 2007 Ultimate Project 2007 Professional Visio 2007 Professional Visual Studio 2005 Team Edition for Developers Visual Studio 2005 Tools for Office Second edition Visual Studio 2008 Professional I also installed MS Project 2010 Beta to test my Add-In against, but have since uninstalled it. I have a suspicion that this may have caused the problem, but I cannot be sure.

  Read the article

• Connectivity with SQL Server Express 2008 r2 and SQL Server 2000 on same machine

  - by Jim R

  At first glance this may same a duplicate of Installing both SQL Server 2000 and SQL Server 2008 on the same machine, but it is not. I have SQL Server 2000 and SQL Server 2008 R2 installed on the same machine and working fine. My problem lies with connecting to the 2008 R2 server from a remote machine. My connectivity needs to be TCP. The legacy installation or SQL 2000 uses the default port of 1433. The named instance is by default configured to use 'Shared Memory' and is working fine. When I configured the 2008 R2 server to use 1433 (I did not think that thru) the service refused to start becasue 1433 was already in use by the legacy SQL 2000 default instance. Doh! What I want to do is have both servers available simultaneously via TCP. both servers need not be on the same port, put if I cannot run them on the same port, then how do I configure the clients? Is there not some kind of proxy available that can monitor the 1433 port and pass the request thru to the correct SQL instance by name? Is this capability built into SQL server already? Thanks, Jim

  Read the article

• Changes made to cli's php.ini not taking effect

  - by Sandeepan Nath

  I have two php.ini files - /etc/php.ini which loads in case of cli /opt/lampp/etc/php.ini which loads in case of browser. I am able to use PHP's Mailparse extension after adding the line extension=mailparse.so in the /opt/lampp/etc/php.ini and restarting lampp. But I am not able to load the same in case of command line - getting PHP Fatal error: Call to undefined function mailparse_msg_create() in ... mailparse_msg_create() is a part of the Mailparse extension. I tried by relogging with the user after making the change and even restarting the system. What needs to be done so that the change takes effect. Update I checked that php -i | grep 'Configuration File' gives PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Update 2 I copied the mailparse.so from /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626 and put it in /usr/lib/php/modules. I added extension=mailparse.so to /etc/php.ini as well. But it still showed this warning PHP Warning: PHP Startup: Unable to load dynamic library ... As told by Lekensteyn, I did ldd /usr/lib/php/modules/mailparse.so and got ldd: warning: you do not have execution permission for /usr/lib/php/modules/mailparse.so' So I gave execute permission. Then ldd /usr/lib/php/modules/mailparse.so showed linux-gate.so.1 => (0x00110000) libc.so.6 => /lib/libc.so.6 (0x0011d000) /lib/ld-linux.so.2 (0x003aa000) which looks normal. BUt now, running php command says PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: undefined symbol: mbfl_name2no_encoding in Unknown on line 0

  Read the article

• Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

  - by Scott Muc

  We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

  Read the article

• Pecl complies .so extensions for OSX built-in PHP and not MAMP

  - by Camsoft

  I've installed the sphinx binaries and libraries and am now trying to install the PECL sphinx module. My system is running OS X 10.6 with MAMP 1.8.2 installed. I try to install sphinx using the following command: sudo pecl install sphinx The PECL command outputs the following: running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 The versions above don't match the versions listed when doing a phpinfo(). It seems that PECL is trying to complie against the built-in version of PHP. If I ignore the errors and continue the it will successfully compile and place the sphinx.so file in: /usr/lib/php/extensions/no-debug-non-zts-20090626/sphinx.so when in fact it should be: /Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/ I've tried copying the sphinx.so file to the MAMP extensions dir but when I restart apache PHP displays the following warning: PHP Startup: Unable to load dynamic library '/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/sphinx.so I think this is because MAMP is 32bit and the built-in PHP is 64bit so PECL complies for 64bit. I might be completely wrong but I did read this when I goggled on the topic. Does anyone know how to get PECL to map to the MAMP version of PHP instead of the built-in version?

  Read the article

• FFMpeg-PHP Installation Error

  - by tundoopani

  While installing FFmpeg-PHP, I got this interesting error: /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function 'zim_ffmpeg_movie_getAudioStreamId': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1051: error: 'CODEC_TYPE_AUDIO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function 'zim_ffmpeg_movie_getAudioChannels': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1089: error: 'CODEC_TYPE_AUDIO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function 'zim_ffmpeg_movie_getAudioSampleRate': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1125: error: 'CODEC_TYPE_AUDIO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function 'zim_ffmpeg_movie_getAudioBitRate': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1161: error: 'CODEC_TYPE_AUDIO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function 'zim_ffmpeg_movie_getVideoBitRate': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1181: error: 'CODEC_TYPE_VIDEO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function '_php_read_av_frame': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1204: error: 'CODEC_TYPE_VIDEO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1215: warning: implicit declaration of function 'avcodec_decode_video' /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1219: error: 'PKT_FLAG_KEY' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function '_php_get_av_frame': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1246: error: 'CODEC_TYPE_VIDEO' undeclared (first use in this function) /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1282: error: 'AVCodecContext' has no member named 'hurry_up' /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1284: error: 'AVCodecContext' has no member named 'hurry_up' /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function '_php_get_sample_aspect_ratio': /usr/downloads/ffmpeg-php-0.6.0/ffmpeg_movie.c:1443: error: 'CODEC_TYPE_VIDEO' undeclared (first use in this function) make: *** [ffmpeg_movie.lo] Error 1 When I ran php -r 'phpinfo();' | grep ffmpeg, I got this: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - libavformat.so.52: cannot open shared object file: No such file or directory in Unknown on line 0 Any idea how I can fix this? I am running on Centos. Thanks in advance :)

  Read the article

• PHP CLI not respecting memory limit in php.ini

  - by user13743

  I am using drush, which is a command-line php app to manage a drupal website. I am running a command to import a lot of data, which is causing me to hit php's memory limit. PHP Fatal error: Allowed memory size of 536870912 bytes exhausted ... Which is 512MB if I'm doing the math correctly (536870912 / 1024 / 1024 = 512). I've changed the directive in the php.ini that drush uses: $> drush status ... PHP configuration : /etc/php5/cli/php.ini $> grep memory /etc/php5/cli/php.ini ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 1024M But I'm still hitting the 512 MB limit! I am running in a virtual machine, whose memory settings I changed from 512 to 1025 MB of RAM to allow drush to run. $> free -m total used free shared buffers cached Mem: 1010 578 431 0 14 392 -/+ buffers/cache: 172 837 Swap: 382 0 382 So it says it has some 431 MB free, now that I've bumped the vm up to 1024. I guess half the memory is being used to run the GUI, but I don't understand how the GUI was running okay when the vm had 512 MB of ram. Why is the PHP cli still hitting a 512 MB memory limit? If it was hitting a system memory limit, shouldn't it die around 431MB, which is what the free command says is available?

  Read the article

• Snow Leopard doesn't repair permissions, despite showing / saying its fixed them?

  - by Jules

  Sometime ago, I used carbon copy as I was replacing my hard drive in my Mac Mini running Snow Leopard. Afterwards, on my new drive I had some permission problems. I've tried several times running a repair permissions / repair disk from disk util. It shows that there are problems and I think it says its correceted the problems. However the problems remain, what can I do to fix them ? It doesn't seem to cause me any problems, that I can tell EDIT Repairing permissions for “Macintosh HD” Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar", should be -rw-r--r-- , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar". User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0. Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib". User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0. Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Resources/Java/deploy.jar". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/Contents/Resources/Java/libdeploy.jnilib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar". Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x . Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/libdeploy.jnilib". Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.nib". Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired. Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib". Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib". Group differs on "private/var/log/kernel.log", should be 80, group is 0. Permissions differ on "private/var/log/kernel.log", should be -rw-r----- , they are -rw-r--r-- . Repaired "private/var/log/kernel.log". Group differs on "private/var/log/secure.log", should be 80, group is 0. Permissions differ on "private/var/log/secure.log", should be -rw-r----- , they are -rw-r--r-- . Repaired "private/var/log/secure.log". Group differs on "private/var/log/system.log", should be 80, group is 0. Permissions differ on "private/var/log/system.log", should be -rw-r----- , they are -rw-r--r-- . Repaired "private/var/log/system.log". Permissions repair complete

  Read the article

• Centos CMake Does Not Install Using gcc 4.7.2

  - by Devin Dixon

  A similar problem has been reported here with no solution:https://www.centos.org/modules/newbb/print.php?form=1&topic_id=42696&forum=56&order=ASC&start=0 I've added and upgraded gcc to centos cd /etc/yum.repos.d wget http://people.centos.org/tru/devtools-1.1/devtools-1.1.repo yum --enablerepo=testing-1.1-devtools-6 install devtoolset-1.1-gcc devtoolset-1.1-gcc-c++ scl enable devtoolset-1.1 bash The result is this for my gcc [root@hhvm-build-centos cmake-2.8.11.1]# gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/opt/centos/devtoolset-1.1/root/usr --mandir=/opt/centos/devtoolset-1.1/root/usr/share/man --infodir=/opt/centos/devtoolset-1.1/root/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --disable-build-with-cxx --disable-build-poststage1-with-cxx --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,fortran,lto --enable-plugin --with-linker-hash-style=gnu --enable-initfini-array --disable-libgcj --with-ppl --with-cloog --with-mpc=/home/centos/rpm/BUILD/gcc-4.7.2-20121015/obj-x86_64-redhat-linux/mpc-install --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.7.2 20121015 (Red Hat 4.7.2-5) (GCC) And I tried to then install cmake through http://www.cmake.org/cmake/resources/software.html#latest But I keep running into this error: Linking CXX executable ../bin/ccmake /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: CMakeFiles/ccmake.dir/CursesDialog/cmCursesMainForm.cxx.o: undefined reference to symbol 'keypad' /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: note: 'keypad' is defined in DSO /lib64/libtinfo.so.5 so try adding it to the linker command line /lib64/libtinfo.so.5: could not read symbols: Invalid operation collect2: error: ld returned 1 exit status gmake[2]: *** [bin/ccmake] Error 1 gmake[1]: *** [Source/CMakeFiles/ccmake.dir/all] Error 2 gmake: *** [all] Error 2 The problem seems to come from the new gcc installed because it works with the default install. Is there a solution to this problem?

  Read the article

• Explain why folder's permissions differ depending on HOW user is accessing server AFP vs SSH

  - by Meltemi

  Hoping someone can explain what is probably fairly obvious...but confuses me. Imagine two users with admin privileges on our server (Mac OS X Server 10.5). Call them joe & bob. both users are members of these groups: Staff Group ID: 20 Workgroup Group ID: 1025 Shared folder "devfolder" has sharing set as so: POSIX: Owner: joe read & write Group: admin read & write Other no access ACL: Workgroup Allow Read & write Question is why when looking at same folder does the ownership appear to change depending on who's doing the looking?!? Both looking at same folder on the server: From Joe's perspective: xserve:devfolder joe$ ls -l drwxrwxr-x 6 joe workgroup 204 May 20 19:32 app drwxrwxr-x 9 joe workgroup 306 May 20 19:32 config drwxrwxr-x 3 joe workgroup 102 May 20 19:32 db drwxrwxr-x 3 joe workgroup 102 May 20 19:32 doc drwxrwxr-x 3 joe workgroup 102 May 20 19:32 lib And from Bob's perspective (folder mounted on his machine via AFP): bobmac:devfolder bob$ ls -l drwxrwxr-x 6 bob _bob 264 May 20 19:32 app drwxrwxr-x 9 bob _bob 264 May 20 19:32 config drwxrwxr-x 3 bob _bob 264 May 20 19:32 db drwxrwxr-x 3 bob _bob 264 May 20 19:32 doc drwxrwxr-x 3 bob _bob 264 May 20 19:32 lib Now if Bob connects to server via SSH then his output is identical to Joe's, as expected. Can anyone tell me what the client is doing in this case and what should be expected when bob creates or updates files in this folder? What tools do I have to better understand this from the command line? Is this normal? Perhaps a "cleaner" way that wouldn't be confusing with "bob _bob"?!?

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Cant access Dell BMC IPMI Over IP

  - by Bobb

  I have Dell R210 with iDRAC BMC (new name for old BMC). Which is on-board feature with shared NIC (I believe). Server is on colocation and I didnt set it up before sent there... So I asked for the remote hands to setup IPMI Over IP. They enabled it, set the IP and everything. The IP is different than main box IP. Also the box is cabled to NIC1 and the BMC supposed to share it (am I right?) I can see new IP in the Open Server Administrator (installed on the box). I tried Supermicro IPMI tool and I tried Dell ipmish.exe command like this ipmish -ip xxx -u root -p calvin sysinfo gives BMC is not detected What could be wrong? is there a diagnostics tool I can try? It must be something obvious. I just never used things like that before.... P.S. I read something about encryptions key in the Dell docs. But I understand that is for encrypted IPMI 2.0 and ipmish can use IPMI 1.5 without encryption.

  Read the article

• Crazy problem with Nginx, PHP5-FPM on Ubuntu

  - by Emmanuel

  I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

  Read the article

• Ipsec config problem // openswan

  - by user90696

  I try to configure Ipsec on server with openswan as client. But receive error - possible, it's auth error. What I wrote wrong in config ? Thank you for answers. #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "f-net" #1: received Vendor ID payload [Cisco-Unity] 003 "f-net" #1: received Vendor ID payload [Dead Peer Detection] 003 "f-net" #1: ignoring unknown Vendor ID payload [ca917959574c7d5aed4222a9df367018] 003 "f-net" #1: received Vendor ID payload [XAUTH] 108 "f-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response 031 "f-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message 000 "f-net" #1: starting keying attempt 2 of at most 3, but releasing whack other side - Cisco ASA. parameters for my connection on our Linux server : VPN Gateway 8.*.*.* (Cisco ) Phase 1 Exchange Type Main Mode Identification Type IP Address Local ID 4.*.*.* (our Linux server IP) Remote ID 8.*.*.* (VPN server IP) Authentication PSK Pre Shared Key Diffie-Hellman Key Group DH 5 (1536 bit) or DH 2 (1024 bit) Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 86.400 seconds / no volume limit Phase 2 Security Protocol ESP Connection Mode Tunnel Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 3600 seconds / 4.608.000 kilobytes DPD / IKE Keepalive 15 seconds PFS off Remote Network 192.168.100.0/24 Local Network 1 10.0.0.0/16 ............... Local Network 5 current openswan config : # config setup klipsdebug=all plutodebug="control parsing" protostack=netkey nat_traversal=no virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn f-net type=tunnel keyexchange=ike authby=secret auth=esp esp=aes256-sha1 keyingtries=3 pfs=no aggrmode=no keylife=3600s ike=aes256-sha1-modp1024 # left=4.*.*.* leftsubnet=10.0.0.0/16 leftid=4.*.*.* leftnexthop=%defaultroute right=8.*.*.* rightsubnet=192.168.100.0/24 rightid=8.*.*.* rightnexthop=%defaultroute auto=add

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by Puddingfox

  I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >